Related
Hi,
I have a H2000 Phone, that is stuck in a boot loop,
How it all started:
I tried to use "LCD density changer"
and I set it to change density on boot (massive mistake)
when it rebooted it shows that android animation over and over again, it locks up then vibrates then starts the animation again... CRAP!!!
so my thoughts are well like the few android phones and tablet that I have had previously I will just re-write the ROM to it somehow
well..... seems as it that is like getting blood from a stone... nobody has it???.. how can this be???
nobody at all has ever written a customs ROM for this phone??, surely not?..
I have looked high and low for a ROM for this phone, spending hours using "google Translate" to read though Chinese forums, even randomly signing up to the forums to find that I can't fins any info at all.
I do not have the IMEI problem that most people are talking about (yet)
because I cant even get that far,
i have downloaded the system.img, recovery.img etc etc. for the device, but unless I can get them onto the phone they are useless to me,
I have tried the SPmultiportflashdownloadproject.exe and installed the Mediatek MT6516 drivers and the device is recognised by windows (for about 5 second after being plugged in then the phone shows the charging indicator on the screen and the device is no longer accessable by windows)
as far as I know I have the right bits to flash the firmware or ROM to the device, but i'll be buggered to know how to do it,
I have looked all though the forums and seems as nobody so far has a solution
i can get into revocery <3e> mode by holding "+" and "Power" this gives me a green android and a explanation mark inside a triangle
if I press the "home" soft key I get
Android system recovery <3e>
Android system recovery utility
then the options of;
Reboot system now
apply sdcard:update.zip
wipe data/facory reset
wipe cache partition
So I would assume I would be after an update.zip package to progress using this method.
I can also get a "factory menu" by pressing the "Camera button" and "power button" this gives me:
"Factory Mode"
with the option of:
Full Test
Item Test
Test report
clear flash
version
reboot
I can go through the menu items using the volume "-" and "+" keys but cannot select any of the options, I have tried a few different combinations of buttons but nothing helps..
I do however have access to a working H2000, if this helps at all, I doubt it..
I ripped the build.prop off the working H2000 and will post that in a sec
would be nice if somebody could write an update.zip with the build.prop info and sign it for me???...
Please help me...
Ok I used
SP flash tool v1.1052.3
I flashed the rom I had to the device,
but i had to untick preloader for the prog to recognise my device
and it told me to insert the cable in 5,4,3,2,1
BAM it worked..
It turns on and works!!!
...but the colour is like it is inverted..??
but I do have access to the device now
should be able to access via adb connect "ip" when I get home to my wireless connection and maybe mount /system as rw and push the build.prop file
it could be that I have the wrong firmware for this hardware? as I know some were resistive (H3000 is resistive in a different casing and some are Capacitive, H2000)
I think i need to find the recomended software "SP flash tool v1.1051.5"
if anyone knows where i can find it then i will try again
Cheers,
Keg
Ok now to make things worse
The dual sim IMIE's have disappeared... (DANG!!)
I have now hit my brick wall, it looks like to do anything usefull from here on I will need the special programming cable... without it I cannot do much usefull...
if anyone knows of somebody in Canberra Australia with a cable that would save me some greif...??? Lol..
on another side note, I DID work out how to successfully change the LCD density on this phone,
I STRESS HERE I CANNOT BE HELD RESPONSIBLE WITH ANY MISLEADING OR WRONG INFORMATION THAT IS PROVIDED BELOW, I AM RE_WRITING THIS FROM MY PROVEN TO BE HORRIBLE (just ask my missus) MEMORY,
I am providing it as a rough guide, and it may not work or could brick your phone like i did to mine!!!
Ok, here we go...
it involved installing Z4Root, running the permanent root option, then using ADB from the Android SDK, I typed
"adb devices" to check that only one device was connected,
then;
"adb shell"
this gave me "$" then I typed;
"su"
and accepted the superuser request on screen
then it gave me "#"
from here I typed
"Mount" to advise of the current mountings it told me /system was from /dev/block/mtdblock8
then to access and modify the build.prop file I had to make /system Read /Write by typing in;
"mount -o remount,rw -t yaffs2 /dev/block/mtdblock8 /system"
then i typed
"chmod 777 /system"
"exit"
"exit"
From here I could then use the file explorer that comes with phone to open up /system and navigate to build.prop
then by selecting it i could scroll down the screen to almost the end where is says
LCD DENSITY=160 Or something like that
and I changed it to 140 the first time and then saved.
I reset the phone and once it booted the LCD was set to 140!!!
I tried again by doing all the above again (to get rw in system again) and set to 100 rebooted and it was set to 100 (everything is smaller and doesn't croud the screen anymore) obviously this ROM wasn't ment to be set at anything else or b easily modifiable due to the face that nothing re-sizes properly and it looks kinda crappy... (Do'H, though on a plus side the browser should be able to scale a page better now though)
So after all that I DO NOT recommend doing this procedure unless you have the programming cable and the Factory ROM just incase you bugger it up like I did....
-CHEERS
-KEG
Hi there,
I hope this helps, here is a link for the H2000 rom, try this site as its great for chinese phones, www.pandawillforum.com thanks Mark
http://www.pandawillforum.com/viewthread.php?tid=3536&extra=page%3D1
also look at this link for flashing
http://www.pandawillforum.com/viewthread.php?tid=3536&extra=page%3D1
Help! H2000 Incoming calls rejected after "clean data"
My phone is a H2000 iPhone 4 Clone with Android 2.2 Froyo. Here is the problem: I have went to Settings and then Manage Applications. I scrolled down to the Settings application and clicked it.
I selected the buttons Clear Data and Clear Cache. I was then sent to the android homescreen. Since then, whenever someone tries to call my phone, My phone will vibrate for a second, not show anything on my screen, then display on the other callers phone "User Busy". However I can still call to other people, that works atleast.
Do any of you know a solution? The phone is definetly getting the call because it vibrates when it gets the call, it just doesnt show anything on the phones screen, thus I cannot accept the call and then the other caller gets "User Busy" on their phone. Any advice? Please? Im really stumped here . Thank you in advanced!
Edit: The phone was working FINE before I did this to the Settings application.
Thanks a lot
update+working skype
Hello.Nice to meet you.Did anybody have a update for H2000? Did anybody tried to use skype on this phone? Is there a working version of skype?Thank you.
OK, I've read a lot of comments about people having trouble installing MoDaCo clockworkmod, or even turning their devices S-off. But my guide is going to go step though step of how to turn your device into a lean, mean killing machine. It took me days to accomplish this when i first got my device, hopefully this will take you under 30 minutes! I'm a junior member, i know, so cut me some slack, PLEASE.
WARNING AND DISCLAIMER: I AM NOT RESPONIBLE FOR ANYTHING THAT HAPPENS TO YOUR PHONE. FLASH AT YOUR OWN RISK, EVEN IF IT FALLS APART IN YOUR HAND, OR BECOMES GODLY FAST!
1. The first thing we need to do is turn S-OFF for your mytouch 4g slide. It is probably the easiest thing to do, other then installing a rom on your device.
a. You will need to download the usb drivers for your phone, DON'T SKIP THIS STEP, or you'll wonder why your phone isn't discovered by the software. You can find those drivers at this website right here:
http://www.htc.com/managed-assets/support/software/htc-sync/setup_3.0.5579.exe
After you have that software installed, plug in your phone, and give it a couple minutes to install all the correct drivers for your device, then make sure you go to the bottom right of the computer and exit out of that software, it can't be running when your trying to S-OFF your device. Now I dont think you have to have the fastboot drivers installed either, but why not, lets go ahead and download those files and get those installed too.
http://downloads.unrevoked.com/HTCDriver3.0.0.007.exe
After you have those installed, its now time to move on.
b. Now thanks to unrevoked and AlphaRev and their team, you will go to their site at http://revolutionary.io/ and you will scroll down and click on Download for Windows (If you can take everything I'm saying and do the linux version, right on!) at that moment a download box will appear, but do not download those files, download the files from this website http://www.megaupload.com/?d=BP2E3ZQ3 .But you will need to enter some information in the box below after you click on windows download, just remember, you don't need those files. Your operating system, device, HBOOT version, and serial number. Your HBOOT version can be found by taking your device, going to apps, settings, power, and uncheck fast boot, then power it off, i always power it off and then pull the battery out, makes me feel safer...and soon as its off, holding the volume down button, camera button, and power button all at the same time. You'll then see a screen with the android bots on the bottom are rolling on skateboards. At the top should be your HBOOT version, and there is only one option on the site, so hopefully your in luck! For your serial number,take the battery out from this screen, don't push any buttons, and on the sticker under the battery, your serial number will be there starting with HT--- or power your device back on, then go to apps, settings, about phone, phone identity, and wala, your device serial number. After you enter all that information into the site, it will generate you a beta key, YOU NEED THAT IN ORDER TO S-OFF AND ROOT YOUR DEVICE!! So write it down somewhere, copy and paste in word, do what you do
c. Now we have everything downloaded, we have our beta key, its time to get to work!
d. The file you downloaded from megaupload, "MT4GS-ADB-WINDOWS" you need to extract that file into a folder on your desktop. Make sure you open the folder mt4gs-adb, and extract the files out of the folder, so you should have 12 items in your folder on the desktop, not just a folder in a folder! I created a folder called "root mt4gs". You want all the files in one location. After there all extracted, open your folder on the desktop. On your phone, go to apps, settings, applications, development, and click on usb debugging and make sure the check mark is blue on the right. Now plug your phone into the computer.
Now in your "root mt4gs" folder, double click on revolutionary. At that moment it should ask you for that beta key i told you to save. Go ahead and enter that now (its case sensitive). Let the software run for a couple minutes....
Now after it says S-Off, your halfway there!! Your HBOOT will now say 1.44.1107. That way you know its done! It will ask you to install clockwork recovery mod, say NOOOO, it has hella problems. It gave me problems when i said yes the first time, i'll show you another way.
e. At this moment, we're going to install clockwork recovery v4.0.0.9, thanks to Paul O'Brien/MoDaCo, the gods lol. First, turn your device off/pull the battery out, thats what i do. Then hold volume down button, camera button, and power button at the same time. It should show you the skateboarding androids, and at the top it should say -Revolutionary- in purple. If it doesn't, don't continue, retry all steps or message me. Then plug your phone into the computer, and using the power button as the selection button, push the power button as your highlighted over FASTBOOT. It should say FASTBOOT USB at the top in red now.
Now believe it or not you already have the file you need in your "root mt4gs" folder. Your now going highlight all the files in your "root mt4gs" folder to the root of your hard drive. Click on My computer, double click on your c: drive, and paste those files right on there, do not copy the folder, or put these files in a folder!! Now your going open a command prompt. {Hold the windows key and tap r}. Then type "cmd" without the parenthesis and it should open up a black box.
Now type cd\
Your command prompt should now just say c:\> thats what you want it to say
Now your going to type adb.exe
You should see a whole bunch of words flash on the command prompt, the last couple words should say "bug tags are printed." That means your right on track.
From here, you are going to type in fastboot devices
it should have the serial number of your device and the word fastboot right next to it!
Now, here comes the tricky part that i got stuck at, but i know you can do it! Now this will work if you put the files exactly where i told you to put them. you now will type fastboot flash recovery c:\clockworkmod.4.0.0.9.img
it should say " sending 'recovery'
okay
writing recovery'
okay
finished. total time: (mine is 10.400s)
Now to make sure it's intalled, on your phone, click power button and you should now see fastboot, recovery, factory reset, simlock, and imagecrc as options, use your volume button to go down to recovery, and click power button.
You should now see clockworkmod recovery 4.0.0.9.
f. Now lets put superuser on your device so you can be free!
click on this file and download it, DO NOT EXTRACT IT
http://downloads.androidsu.com/superuser/su-2.3.6.3-efgh-signed.zip
Now after you have downoaded that file, on your phone, use your trackpad, and scroll down to "mounts and storage"
then scroll down to mount usb storage. now you should be able to put files on your sd card, make sure you put it on the root of your sd card, not in a folder, it doesn't matter, but i prefer it!.
Now unmount on your phone by clicking the option, click go back, and then scroll down to "install zip from sdcard" and click on it, then click "choose zip from sdcard". Find that file we just put on there "su-2.3.6.3-efgh-signed.zip", and click on it, then click yes. Now click on go back, and click reboot system now!
Now if you want to stay stock, your done, your rooted, so now just install root checker, and busybox, and your good to go, if you want to do some roms, keep on reading.
Now you cross your fingers, and grab a soda, because we're 75% done!
g. Now is the easy part, all you do now is download the roms from other developers, copy them to your sdcard, then turn off the phone, hold volume down, camera and power button, go into recovery with using vol up and down buttons as the selector, and the power button to confirm your option. As you enter clockwork mod, you can then go follow the directions of the developer as to wipe certain sections, and how to install there roms/patches. YOUR DONE
If you have any questions, please let me know, also I didn't make ANY of this software, this guide just has every link to get you everything you need at one spot. I also have the original file to make your phone completely stock, so if you need that, let me know and I'll upload that and send the link out.
If you want to donate to me, donate to all the other og's first!
Thanks to
jdmarko
unrevoked
alpharev
paulobrien
MoDaCo
and if I forgot you, let me know. thanks!
Now this is how you give a tutorial!!! If i had some extra cash i would totally donate bro! I was trying to install 4.0.0.9 for two days from the dude that made its site and his directions were not thorough enough. Thanks dude.
Oh dude no worries, a thanks is just as good. I appreciate it, it took me days, so I'm happy I could help brotha!
Sent from my MyTouch 4G Slide using xda premium
Going to try! :-D fingercross tor me!
Thank you very much, very good write up.
Geko90 said:
Going to try! :-D fingercross tor me!
Click to expand...
Click to collapse
Fingers are crossed, the tutorial has proven effective so far, so hope all goes well, tell me how it goes!
poken1151 said:
Thank you very much, very good write up.
Click to expand...
Click to collapse
Thanks! I'm assuming it worked then?!
Superuser wont install for me, Error in /sdcard/su-2.3.6.3-efgh-signed.zip
Status 0
I wiped cashe/ dalvic downloaded several times No good.
correct hboot, s=off
just wont flash SU ???
phil0sophic said:
Superuser wont install for me, Error in /sdcard/su-2.3.6.3-efgh-signed.zip
Status 0
I wiped cashe/ dalvic downloaded several times No good.
correct hboot, s=off
just wont flash SU ???
Click to expand...
Click to collapse
Ok let's figure this out.. on step f, you did unmount your sd card, right? I haven't dealt with this problem before so if I ask a stupid question, I'm just trying to solve this. Also you don't need to wipe anything to install superuser, so that could be the problem also, so reboot ur fone, and let's try step f again! Keep me updated please!
phil0sophic said:
Superuser wont install for me, Error in /sdcard/su-2.3.6.3-efgh-signed.zip
Status 0
I wiped cashe/ dalvic downloaded several times No good.
correct hboot, s=off
just wont flash SU ???
Click to expand...
Click to collapse
It took a lot of us several attempts to flash the superuser zip. The 4.0.0.8 recovery isn't the greatest. Keep trying until it installs and you get root. Then upgrade to the modaco 4.0.0.9 recovery right away. It's not perfect either but it fixes a LOT of the issues known with 4.0.0.8.
And a comment to the OP, this is an incredibly helpful walkthrough! If only people would actually search and find this before posting new threads like "how do i root" and all that crap.
Thank you.
Great job on this and thanks for your work. I wish I would have had this tutorial when I did mine.
Sent via my talk enabled Galaxy Tab using XDA premium.
Techlvr said:
Great job on this and thanks for your work. I wish I would have had this tutorial when I did mine.
Sent via my talk enabled Galaxy Tab using XDA premium.
Click to expand...
Click to collapse
Thanks, I had a lot of trouble doing mine the first time, and I went back to stock, typed this and gave my wife my phone and she went step by step and completed it. So it can't be that hard!
Does this add an app to reboot from as the standard cwm does?
phil0sophic said:
Does this add an app to reboot from as the standard cwm does?
Click to expand...
Click to collapse
An app to reboot from? Not understanding the question throughly... In this cwm, it has the option to reboot system as every other cwm that I've used has. But an app... I do not have an app though...hope I answered your question!
numbaoneforeva said:
An app to reboot from? Not understanding the question throughly... In this cwm, it has the option to reboot system as every other cwm that I've used has. But an app... I do not have an app though...hope I answered your question!
Click to expand...
Click to collapse
OK ill reexplain is there an icon in the apps drawer for CWM to select to reboot etc. because it didnt install one on the MT4Gslide as on my MT4G.
I know something is goofy as SU wouldnt flash, I had to install the new version from the market.
phil0sophic said:
OK ill reexplain is there an icon in the apps drawer for CWM to select to reboot etc. because it didnt install one on the MT4Gslide as on my MT4G.
I know something is goofy as SU wouldnt flash, I had to install the new version from the market.
Click to expand...
Click to collapse
Oh, now i understand. No there isn't. I don't have one at all, as soon as I installed clockworkrecovery, and superuser, I flashed undeads rom on there. And I've been reading that superuser is being buggy when installing it on this phone through cwm...I'll look into that tonight, see if i can find the root cause.
Thanks...This is my wifes phone, she just upgraded from a CLIQ (one of the two people that loved blur)she likes my MT4G and wanted a KBD so here we are....
I want to change the lock ring so need root for the wonderful majic you dev's do....
phil0sophic said:
Thanks...This is my wifes phone, she just upgraded from a CLIQ (one of the two people that loved blur)she likes my MT4G and wanted a KBD so here we are....
I want to change the lock ring so need root for the wonderful majic you dev's do....
Click to expand...
Click to collapse
Well your at the right forum to get you started. And thanks! This is my first post so I'm trying!
Sent from my MyTouch 4G Slide using xda premium
phil0sophic said:
OK ill reexplain is there an icon in the apps drawer for CWM to select to reboot etc. because it didnt install one on the MT4Gslide as on my MT4G.
I know something is goofy as SU wouldnt flash, I had to install the new version from the market.
Click to expand...
Click to collapse
You probably just have to download ROM Manager from the market, I think that's what you're referring to. There isn't a whole lot of support for our device in ROM manager right now, however, and I haven't checked to see if the "reboot into recovery" works. Go into settings > power > and uncheck fastboot. Then, shut down your phone, wait 10 seconds, hold down the volume down button and turn your phone back on. That'll get you into recovery. Did you get superuser to install? Are you rooted?
Mine won't switch from "revolutionary" in purple at the top to "fastboot" at the top.
It says fastboot USB about 6 lines down, but that's it.
When I type "fastboot devices" it errors and says:
'fastboot' is not recognized as an internal or external command, operable program or batch file.
anyone know what's up?
**** USE AT YOUR OWN RISK ****
The following is posted so that I may share what I've done. It was done by me and for me. If you use it for you, then you take responsibility for whatever happens. This could, potentially, cause problems. It certainly will void your warranty (though it's pretty easy to undo this with no obvious signs.)
Install ClockworkMod Recovery and roots your P6210 tablet.
DO NOT ATTEMPT TO RESTORE ANY CWM BACKUP MADE WITH ANY OTHER VERSION/REVISION. IT WILL BREAK THINGS. THIS VERSION IS NOT BACKWARDS COMPATIBLE. JUST START WITH FRESH BACKUPS AND BE HAPPY.
WHAT THIS DOES:
Installed from recovery, this .zip will first ensure that it's running on the Samsung GT-P6210. If you have a different model, don't waste your time downloading it. It won't work. I have a P6210 to test with. I don't have any other 7 plus tab, so I can't test any other 7 plus tab, and therefore won't even act like it might work. If you want to try it anyway, you should have the knowledge to repair whatever you break - in which case you'll also have the knowledge to unpack this zip file and do things the manual way.
(starting with 20111210, a backup of the recovery is no longer made. I feel this is no longer needed as there is a confirmed working ODIN package people can use to restore their tablets with.)
Next, a new version of the clockwork mod recovery is installed.
(starting with 20111210, old backups are no longer purged. If you are upgrading from my original CWM recovery (previous to Dec 9th), please manually delete old clockwork recovery backups, as they are NOT VALID and will destroy your normal boot operation if you attempt to restore with a proper/current version of this recovery.)
Finally, the tab will be rooted. This only involves copying a tiny file (called 'su') to the system. In order for most android apps to make use of that, however, another application must be first installed. (See "Finishing SuperUser installation" below.) I considered putting that "SuperUser" application as part of this package, but it's really very easy to get it from the market.
INSTRUCTIONS:
Put the installation zip file on your tablet's external SD card. If you don't have an external SD card, you won't be able to install this. MicroSD cards are cheap. If you have a tablet that costs 399 USD, you can afford to spend a few extra dollars/euros/pesos/whatever on a microSD card. Just get one. Not only is it required for installing this from the factory recovery, but it makes a great place to back things up to. A nice 16GB card is suggested. 32GB is better. You'll need AT LEAST 1GB for this recovery. If you have a previous version of CWM already in-place, you won't need the storage card.
You can download the .zip file directly to your tablet and then possibly use the built in "My files" applet to move it to extStorages/SdCard, or you could download it to your computer and use "adb" to push the file to /mnt/sdcard/extStorages/SdCard, or you should be able to get it there with "Kies." If you have the proper adapter, you could also attach the microSD card directly to your computer and just copy it there. It doesn't matter HOW you get it on the card, as long as it's on the card.
After the zip file is on your microSD card, and the microSD card is inside (and recognized by) your tablet, then you need to...
Boot into recovery mode.
If the recovery version banner is "CWM-based Recovery v5.x.x.x", then you already have a version of CWM installed and should skip ahead to the proper section. If the banner is "Android system recovery (3e)", then you have the factory recovery and should continue with...
Installing from factory (3e) recovery:
Use the volume up/down buttons to move the highlight up and down, and the power button to select the highlighted option.
1. Select "apply update from external storage"
2. Select the file you placed on your storage card (starts with "p6210_CWMR".)
3. Sit back and watch it run. Read the information that is being sent to the screen. If there's an error, it'll display some message. If it works, it'll display a message starting with the word "Done!"
4. Select "reboot system now."
You now have a CWM-based recovery installed, and your tablet is rooted.
Please skip ahead to "Finishing SuperUser installation"
---------------------------------------------
Installing from CWM-based Recovery
Use the volume up/down buttons to move the highlight up and down, and the power button to select the highlighted option.
1. Select "Install zip from sdcard"
2. Select "choose zip from internal sdcard" (which will actually point to the external card.) (If you are upgrading and chose not to put the .zip on the external microSD card, you might need to select "choose zip from sdcard" instead.)
3. Select the file you placed on your storage card (starts with "p6210_CWMR".)
4. Select "Yes - Install (whatever filename you selected)"
5. Sit back and watch it run. Read the information that is being sent to the screen. If there's an error, it'll display some message. If it works, it'll display a message starting with the word "Done!"
6. Select "+++++ Go Back +++++"
7. Select "reboot system now."
---------------------------------------------
Finishing SuperUser installation
Install the SuperUser application directly from the android market:
https://market.android.com/details?id=com.noshufou.android.su
....
Post-installation Notes and Issues
It's a known issue with the version of CWM used in this recovery that the "internal sdcard" actually references the built in storage on the tablet. So, if you want to back up to your microSD card, choose "backup to internal sdcard". I'm retaining this issue to stay "compatible" with other CWM recoveries of the same version number. (won't fix)
The .zip package displays an incorrect version identifier/date when version 20111209 is being installed. (It's shows a banner with the date of 06-Dec) (cosmetic)
This recovery is NOT compatible with firmware updates via Kies (and perhaps not via other samsung official methods.) In order to perform a firmware update, I suggest the following procedure: First, perform a CWM Recovery backup, then use the ODIN package found elsewhere to restore this tablet to a factory state. Let Kies upgrade the tablet to whatever version it wants (give it a few tries in case multiple upgrades are needed.) Then re-install this recovery, and perform an "advanced restore" (or "advanced restore from internal sdcard if you made the backup using the similar option.) From there, restore "data." That will leave the entire firmware update in place. (boot is the normal boot kernel; system is what people like to call a ROM here, but is the samsung pre-installed apps; and data contains the applications you install and all your data.) Then "go back", wipe the cache partition, advanced, and wipe the dalvik partition. HOWEVER, please note that I have no way to know if any given samsung firmware update is "compatible" with this restore unless I've tried it myself. It's compatible with everything released up to the date of this note (10-Dec-2011), but I can't predict the future.
Donation?
I don't take donations. If you have spare money (I don't), please donate it to the Salvation Army, Red Cross, or just find a homeless person on the street and give them something. My favorite charity is the Shriner's Hospital for Children. (yes, I am.) If you'd like to thank me, there's a button at the bottom of this post dedicated to that. If you don't want to thank me, that's okay too.
Changes for 20120107:
Brought the recovery kernel up to date with the normal boot kernel. The only impact should be that if you keep crashing any time you boot normally (and before you are able to perform any action), you can now boot into recovery to _hopefully_ be able to retrieve the /proc/last_kmsg as a diagnostic tool.
Reduced the size of the .zip quite a bit.
Changes for 20111210:
* A backup of the existing recovery image is no longer being made. I feel this is no longer needed, as an ODIN package is now confirmed to be working that people can use to restore their tablets to a factory state.
* Old clockworkmod recovery backups are no longer being deleted when installing this. If you are installing this or newer from my CWM recovery previous to Dec 9th, 2011, please manually delete all those old backups. If you attempt to restore them, please be prepared to download ODIN and a factory ODIN image, as you'll need it in order to get your tablet working again. You've been warned...
* The issue that was causing backups to the tablet's built-in storage to fail has been corrected.
Changes for 20111209:
* Issues with getting into recovery are resolved.
* a backup of the recovery is only made if there is no sign of a previous version of this same recovery in place
Credits
Most obviously, Koush for his wonderful clockworkmod recovery. It's the basis of this entire project. Entropy512 for pointing me in the proper direction on a couple of things, pershoot mods to CWM for the Galaxy Tab 10.1 that I ported over to this one (due to the different partition structure of honeycomb devices.)
Links are below...
Take care
Gary
thanks gary, how might we be able to tell if this will be kosher with 3g version? do we need to --dump all pit via heimdall to ensure all partitions match up,etc? Thank you for your speedy work.
chrisrotolo said:
thanks gary, how might we be able to tell if this will be kosher with 3g version? do we need to --dump all pit via heimdall to ensure all partitions match up,etc? Thank you for your speedy work.
Click to expand...
Click to collapse
It's not kosher at all. I didn't wash my hands before compiling it, and had bacon bits on my salad for lunch. Sorry.
Thanks Gary. I have been watching your progress for about a week and you are like a put-bull. Amazing. u da man!!!
Pit bulls would be shamed as wussies. Many great devs possibly have a touch of Asperger's syndrome (with MUCH better socialization skills!) which, with tasks like this, is a benefit! At the very least just plain tenacious! lol
Thanks Gary. I've learned a lot just following along reading the discourse between you and others like Entropy. Appreciate it.
garyd9 said:
It's not kosher at all. I didn't wash my hands before compiling it, and had bacon bits on my salad for lunch. Sorry.
Click to expand...
Click to collapse
ahhh , close enough. anyways what could we do to find out without actually flashing this to possible incorrect partition??
chrisrotolo said:
ahhh , close enough. anyways what could we do to find out without actually flashing this to possible incorrect partition??
Click to expand...
Click to collapse
Which "3g" model do you have? The tmobile one or the international one?
I'm trying to narrow down which is the GT-P6200 and which is the SGH-T869!
I'm working with someone via PM and email to get the information needed for the SGH-T869, and I think it'll be pretty easy to get a recovery together for it, but other people will have to test and validate. I think this is the tmobile version...
international p6200
Soft Brick(kinda Sorta - well not really). Using defult 3e recovery. Tab would boot up, but would not go into recovery at all. Nada Nada. Thought it might have been some leftovers from other stuff I have been trying, so I odin3'd the factory image, did a wipe all and tried it again. Same difference. The only thing I could really think of was maybe I had a corrupted download.
funny thing is that it would boot up into the OS. Just not into recovery. will keep trying as I really want a way to make nandroid backups.
otamctech said:
Tab would boot up, but would not go into recovery at all.
Click to expand...
Click to collapse
No need to ODIN... that's why the package creates that backup recovery image. However, you said it's booting normally, correct? If so, it's not broken or bricked (and I experience the exact same thing.)
For some odd reason (that I haven't been able to figure out), after I flash a non-stock recovery, its very difficult to get the tab into recovery mode. Some times I get it instantly, and some times I have to try several times in a row. Are you using adb? If so, it might be easier. Power off the tab, plug it into your computer, and eventually the tab goes into a "low power mode" where you see the battery gauge but nothing else. From there (again, assuming you have adb installed/working), you can just run "adb reboot recovery" That usually gets me into recovery. 90% of the time.
If not, just try again. If you see the samsung animation starting, press/hold the power button to turn it off again, then press/hold volume up again... etc. It's a PITA, and a major annoyance of mine.
Two things about it make it REALLY annoying for me. First, I'm using samsung's own kernel for this... but I'm just repacking the initramfs portion of it. Second, if you put the factory recovery back, it's easy to get into recovery again.
chrisrotolo said:
international p6200
Click to expand...
Click to collapse
I'll get to that one eventually. I'm commited to do the tmobile one next, and I REALLY need to concentrate on my full-time job (the one that pays me a salary) which only leaves me a couple hours each day.
take care
Gary
absoultely, take your time. Is there a certain battery percentage requirement to get into either stock or CWM recovery say 50% or 60% minimum? we had this issue on dell streak 7. Let me know if I can help with partition layout or anything for p6200. thanks.
chrisrotolo said:
absoultely, take your time. Is there a certain battery percentage requirement to get into either stock or CWM recovery say 50% or 60% minimum? we had this issue on dell streak 7. Let me know if I can help with partition layout or anything for p6200. thanks.
Click to expand...
Click to collapse
No hard requirement I'm sure - but flashing at below 50% is just a stupid reckless risk, plain and simple as that.
If you are having issues getting into recovery after flashing this...
Here's a procedure I've come up with that has allowed me to get into this recovery 9 out of 10 attempts (and it doesn't require any special connections to a computer.) Please read all the steps before starting so you're prepared for what comes next. It'd really be annoying to have recovery finally pop up, but you weren't paying attention so the tablet turned off.
power off the tablet
Throughout this entire process the volume UP switch should be held and not released. This is the side of the volume switch closest to the power button. Once you see your recovery screen, you can release the volume switch (and any other button you might be holding at that time.)
Press/hold Volume Up (constant)
Press the power button, hold it down for 2-3 seconds, and release it.
You'll see the Samsung logo screen for a few seconds...
Instead of the expected recovery screen, you might see the samsung boot animation with music. If so, immediately (without releasing volume up), press and hold (and keep holding) the power button. Don't let it go this time.
The tablet will appear to power off after holding the power button for a few seconds, and then will power back on a second or two later.
(you're still holding that power button, right? how about volume up? Good.) Again, you'll see the samsung logo screen for a few seconds...
Instead of the boot animation, recovery should pop up this time. Release the power button as soon as it does or you'll just turn the tab back off again. You should also release the volume UP at this point.
(If you've flashed my recovery, please try this. If it doesn't work, please take the effort to reply to this post so I can know what people other than myself are experiencing.)
Take care
Gary
updated OP with:
Post-installation Notes and Issues
I'm aware that after flashing this, it is difficult to get back into recovery. I'm not sure WHY, but it's fairly consistantly a pain in the rear. However, I have found that following the steps in the following post seems to work (at least for me) 9 out of 10 times. (I was distracted on the 10th try, so not sure if it worked or not): http://forum.xda-developers.com/show...6&postcount=14
Remember above I mentioned that when this package installs, it creates a backup of the old recovery? Well, it does that no matter what recovery was in place. So, if you install this package with a factory recovery, that backup will be of the factory recovery (which is probably what you want.) If you install this package a second time when you already have the CWM Recovery installed, you'll overwrite that factory recovery backup with a backup of the CWM recovery (which makes no sense.) I'd strongly suggest that after you FIRST install this package, you make a copy of that backup recovery image file (and full filename is displayed when it's created), and stick that copy someplace safe. Perhaps just rename it and copy it to your SDcard or computer. A good name might be "p6210_factory_recovery.img"
The Tab 10.1 could be difficult to get into recovery too.
Usually, the following works for me:
Press and hold VolUp
Press and hold Power until the screen turns on (this is slightly different from your instructions)
Release Power but keep holding VolUp until Recovery shows
__________________
somebody9 said:
I was wondering if anyone knows what needs to be deleted in order to get rid of that pesky pop up menu you get by pressing on the Chevron/Arrow in the middle of the bar.
Click to expand...
Click to collapse
Please start a new thread for a new topic. Try to keep this one isolated to the CWM recovery.
garyd9 said:
Please start a new thread for a new topic. Try to keep this one isolated to the CWM recovery.
Click to expand...
Click to collapse
Sorry about that. Post removed.
Garys method of booting into recovery works fine. I'm just going to post it in linear format.
1. Press the power button and select Power Off
2. Press the volume up button (closest to power button) and do not release until the recovery screen is displayed
3. Press (do not hold) the power button
4. The static Galaxy 7.0 Tab Plus screen will display (possibly twice)
5. When the animated Samsung screen displays, press and hold the power button
6. The static Galaxy 7.0 Tab Plus screen will display
7. Release all buttons when the recovery screen displays.
This works every time for me
Ok, here's the deal.. I have the Skyrocket, and a couple days ago, I accidentally stepped on it and cracked the screen. It no longer showed any picture, so.... In a fit, i threw it at the wall and shattered the screen completely. The phone still powers on, and boots to CM10 (I can hear the sound when I press the power/lock button). I have CWMR installed as well. Apparently, I didn't have USB debugging enabled (altho i could have sworn I did!), and now I can't get at any of my files from my sdcard.
I tried adb and fastboot, neither even detects the phone as being there.
I have a replacement device coming in a few days (AT&T insurance, GREAT STUFF!), so I would really like to be able to get my stuff from this phone ASAP... Anyone know a way?
Fastboot doesn't work?? Then something is wrong beyond just the screen. . . . Anyways, Can you boot into recovery?? If yes, there is a guess work method to mount the system partition via CWM so you can use adb. You can ask someone who uses the similar device with cyanogenmod10 to count the number of steps to go to the "mounts and storage" option in the CWM main menu and counts the steps to go to "mount system" option in the sub menu and use that counts to mount your system partition. . . . If you can successfully mount system partition then you can gain access to adbd (adb daemon) binary in your system partition and use adb from recovery just by plugging the device to your computer. And use adb shell to mount the other partitions and pull all the files you need. . . . I don't know whether if this works practically but theoretically it should work . . . . Keep in mind that you have to guess the no of steps carefully or else you may end up "wiping" any partition accidentally. . . .
#pitchblack5691#
i made the same mistake at one point lol try this it worked well for me when i couldnt even see the screen maybe it might work for you good luck http://code.google.com/p/adb-file-explorer/
pitchblack5691 said:
Fastboot doesn't work?? Then something is wrong beyond just the screen. . . . Anyways, Can you boot into recovery?? If yes, there is a guess work method to mount the system partition via CWM so you can use adb. You can ask someone who uses the similar device with cyanogenmod10 to count the number of steps to go to the "mounts and storage" option in the CWM main menu and counts the steps to go to "mount system" option in the sub menu and use that counts to mount your system partition. . . . If you can successfully mount system partition then you can gain access to adbd (adb daemon) binary in your system partition and use adb from recovery just by plugging the device to your computer. And use adb shell to mount the other partitions and pull all the files you need. . . . I don't know whether if this works practically but theoretically it should work . . . . Keep in mind that you have to guess the no of steps carefully or else you may end up "wiping" any partition accidentally. . . .
#pitchblack5691#
Click to expand...
Click to collapse
No, fastboot doesn't work either, I tried that as well... I was trying to get into recovery, I found another thread here that was an HTC phone, I think, with a similar issue. It gave steps for navigating CWM. I couldn't get the partitions to mount.
I think you're right, that there is something more wrong with it than the screenm, because in the Windows device manager, I could see 2 extra drives that were both listed as Samsung something (it's the next morning now), both with a size of 0 bytes. The strange thing is that the phone would boot. Completely boot. I had a friend message me on Fcebook, and the notification went off on my phone at the same time it did my loaner. (both of which were signed into my Facebook)...
crashpsycho said:
i made the same mistake at one point lol try this it worked well for me when i couldnt even see the screen maybe it might work for you good luck http://code.google.com/p/adb-file-explorer/
Click to expand...
Click to collapse
Thanks for the tip, but this didn't work either.. I don't know what else I screwed up on this phone, but wow... lol
I am new to this site and would first lie to say hi to everybody visiting this post.
I have searched for days to find out about this chinese tablet DA788 or d-age 7" A guy came to me this past weekend and asked if I can rest a forgotten password on this tab. I said sure not knowing it was going to be in ALL CHINESE even the recovery. This is the way it came from the factory.
First I would like to say is power on the phone and make sure it can be read by ADB
if it can be read then your in luck.
Second go into ADB or download it from Android SDK
c:\android\android-sdk\platform-tools>
\platform-tools>adb devices "ENTER"
*******DEVICE NUMBER********
\platform-tools>adb shell "ENTER"
\127|[email protected]:/ # wipe data "ENTER"
wipe data
wiping /data
done wiping /data
[email protected]:/ # reboot "ENTER"
Phone will now reboot
Everything will be wipe and you will be back in Chinese text. You may or maynot lose all of you pictures and music during wipe, but you will lose everything else. I am NOT RESPONSIBLE FOR BRICKED DEVICES !!!!!!! DO AT YOUR OWN RISK
I did 2 of these tablets back to back and worked just fine. You will need to go into settings after your phone boots back to home screen and change the language of your choice. I have attached a text document at the bottom of the page to see how it was done. Hopefully this works for you and good luck.