Database Info

Nand unlock...possible??

Is there a way to nand unlock?
Thanks
Sent from my Desire HD using XDA App

What do you mean by that?
NAND is the internal memory place of the device and wht do you mean by unlocking NAND?

i never heard about unlocking NAND

So you can write to it I guess, there's a app that needs nand unlocked to work, SMS limit unlock

Try the following in ADB
adb shell mount -o remount,rw /dev/block/mtdblock3 /system
once you use this command you should be able to push to the /nand directory
if not push the file to the system directory using ADB and then try moving it to /nand from there...
That being said, i don't think i've ever heard of an app that needs access to the /nand directory like you are describing...

rosswaa said:
Is there a way to nand unlock?
Thanks
Sent from my Desire HD using XDA App
Click to expand...
Click to collapse
Hi,
I have used the following steps for unlocking NAND:
Step 1: Search and download the froyo rom of your choice.
Step 2: Place the rom on the sdcard in the bottom directory
Step 3: Open "Rom Manager" and Select "Reboot into Recovery"
Step 4: Once in recovery select "install zip from sdcard"
Step 5: Locate the rom you placed on your sdcard and install it.
Step 6: Once the update is finished select "wipe data/factory reset"
Step 7: Confirm the wipe.
Step 8: Reboot your phone.
Now the phone has rooted with the NAND unlocked.

That's been done since I had the phone, thanks anyway
Sent from my Desire HD using XDA App

NAND Problem. please look

Ok People. I think i have damaged my htc pico NAND thingy. I have followed the procedure for installing ROMS( doing factory reset wipe cache format etc ) but cant pass the HTC Logo on most ROMS. only AteeqRom is working but when it starts and i pull the screenlock it is giving me alot of force crashes even i cant get into menu. the problem is I cant get into menu. i have seen the recovering from NAND damaged procedure by cute_prince . but the problem is it is not passing the lookscreen. please help me i dont want to lose my phone at this stage. any help will be appreciated. Thanks alot.

Did you overclock your Explorer-thingy?
I mean, over-clocking the CPU, GPU, etc.could have caused the NAND-frying, if you had overclocked them. If you haven't overclocked, then, there is no reason to be worried of.(except for a hard-brick, though.)
Since you told that you followed the NAND recovery procedure, nothing should have happened to your NAND if it wasn't damaged in the first place. But, if it wasnt properly, it would have caused damage.
Anyways, try flashing new recovery, and then, superwipe by akya22, and then, whatever ROM you want to flash.:good:

did everything.
most of the rom is not even starting. i have managed to pass the lockscreen on ateeq rom only ateeq rom is working. i did everything flash recovery and all those reset thingys. but i am getting alot of force crashes and very very low 4mb internal storage. nothing is working correctly. i have not overclocked my cpu. i just flashed CM9 B14 and after that nothing was fine before. i dont understand the cute_prince technique of recovering from nand. i am noob. so help here.

did you read this thread?=>Troubleshooting htc pico(explorer)

My htc explorer hanged with htc logo on screen after rooting my device then factory r
I rooted htc explorer and after factory reset my phone hanged with htc logo. I have htc explorer and rooted and after factory reset my phone was hanged with htc logo what is this ? plz helpme..

Abdullah Malik said:
I rooted htc explorer and after factory reset my phone hanged with htc logo. I have htc explorer and rooted and after factory reset my phone was hanged with htc logo what is this ? plz helpme..
Click to expand...
Click to collapse
you have to flash custom rom...you may find one in development section

No problem
Abdullah Malik said:
I rooted htc explorer and after factory reset my phone hanged with htc logo. I have htc explorer and rooted and after factory reset my phone was hanged with htc logo what is this ? plz helpme..
Click to expand...
Click to collapse
JUST go back to recovery do factory reset wipe dalvik cache and flash any custom rom from the forum!

ex-plorer said:
Ok People. I think i have damaged my htc pico NAND thingy. I have followed the procedure for installing ROMS( doing factory reset wipe cache format etc ) but cant pass the HTC Logo on most ROMS. only AteeqRom is working but when it starts and i pull the screenlock it is giving me alot of force crashes even i cant get into menu. the problem is I cant get into menu. i have seen the recovering from NAND damaged procedure by cute_prince . but the problem is it is not passing the lookscreen. please help me i dont want to lose my phone at this stage. any help will be appreciated. Thanks alot.
Click to expand...
Click to collapse
Frndz those phone are stuck at boot animation bcoz of oc kernal (nand problem) do below following steps:-
you should hv installed on your pc/laptop 1)htc sync
2)adb
Frist flash twrp 2.4.1.0 recovery by cute prince after that,
download flash_erase file from cute prince forum,
now copy cm9 rom and flash_erase file to sd card,
go to recovery(twrp recovery) click install nw install cm9 rom,
nw go to mount and mount system & mount sdcard,
after that go to advanced>file manager>sdcard> in sd card u vill see flash_erase.txt rename dat file to flash_erase,
now copy flash_erase file by clicking on it(it vill show copy option) go back to root of ur internal memory,
there u vill see system,go to system>xbin ,
copy dat file in xbin after copying dat file u vill see flash_erase in xbin folder,
click on flash_erase u vill see chmod755 click it nw go back to recovery and unmount everything,
nw connect ur phone to pc/laptop(u should hv adb and htc sync),
open cmd as administrator>nw copy below all code and paste it in cmd,
code:-
adb shell
su
cd /system/xbin
./flash_erase -N /dev/mtd/mtd2 0 0
./flash_erase -N /dev/mtd/mtd4 0 0
./flash_erase -N /dev/mtd/mtd5 0 0
thanks to sheker developer of flyrom
and cute prince for nand recovery procedure
hit thanks if i helped yuh...
Sent from my HTC Explorer A310e using xda premium

No ROM working correctly.
No ROM is working correctly . i followed the cute_prince guide. but only ateeq rom is working. when i flash other rom i face with low storage superuser not working su binary not found etc. i think my nand is damaged badly. and cute_prince guide is not working correctly. need new way to do it.

ex-plorer said:
No ROM is working correctly . i followed the cute_prince guide. but only ateeq rom is working. when i flash other rom i face with low storage superuser not working su binary not found etc. i think my nand is damaged badly. and cute_prince guide is not working correctly. need new way to do it.
Click to expand...
Click to collapse
Bro follow my method :thumbup:
Sent from my HTC Explorer A310e using xda premium

9282gkg said:
Frndz those phone are stuck at boot animation bcoz of oc kernal (nand problem) do below following steps:-
you should hv installed on your pc/laptop 1)htc sync
2)adb
Frist flash twrp 2.4.1.0 recovery by cute prince after that,
download flash_erase file from cute prince forum,
now copy cm9 rom and flash_erase file to sd card,
go to recovery(twrp recovery) click install nw install cm9 rom,
nw go to mount and mount system & mount sdcard,
after that go to advanced>file manager>sdcard> in sd card u vill see flash_erase.txt rename dat file to flash_erase,
now copy flash_erase file by clicking on it(it vill show copy option) go back to root of ur internal memory,
there u vill see system,go to system>xbin ,
copy dat file in xbin after copying dat file u vill see flash_erase in xbin folder,
click on flash_erase u vill see chmod755 click it nw go back to recovery and unmount everything,
nw connect ur phone to pc/laptop(u should hv adb and htc sync),
open cmd as administrator>nw copy below all code and paste it in cmd,
code:-
adb shell
su
cd /system/xbin
./flash_erase -N /dev/mtd/mtd2 0 0
./flash_erase -N /dev/mtd/mtd4 0 0
./flash_erase -N /dev/mtd/mtd5 0 0
thanks to sheker developer of flyrom
and cute prince for nand recovery procedure
hit thanks if i helped yuh...
Sent from my HTC Explorer A310e using xda premium
Click to expand...
Click to collapse
I followed your method and get this error when trying to install cm10 beta 3 and at the end it says failed. cm9 starts but there are a lot of fc's at startup so can't use them.
"checking for md5 file...
Skipping md5 check: no md4 file
symlink:some sumlinks failed
E:Error in /sdcard/cm-10-2012120
(Status 7)
Error flashing zip '/sdcard/cm-10-2012120"
Please help me. I am getting the same error with every recovery I use and some other roms as well that are freshly downloaded like aokp rc3.

munirshah77 said:
I followed your method and get this error when trying to install cm10 beta 3 and at the end it says failed. cm9 starts but there are a lot of fc's at startup so can't use them.
"checking for md5 file...
Skipping md5 check: no md4 file
symlink:some sumlinks failed
E:Error in /sdcard/cm-10-2012120
(Status 7)
Error flashing zip '/sdcard/cm-10-2012120"
Please help me. I am getting the same error with every recovery I use and some other roms as well that are freshly downloaded like aokp rc3.
Click to expand...
Click to collapse
If u correctly followed ma method there should be no problem in install cm ROMs I think u must try again last time
Sent from my HTC Explorer A310e using xda premium

9282gkg said:
If u correctly followed ma method there should be no problem in install cm ROMs I think u must try again last time
Sent from my HTC Explorer A310e using xda premium
Click to expand...
Click to collapse
If I paste my code in cmd it doesn't recognize the command. I downloaded adb ,extracted it and then use shell to enter commands one by one and I connected the phone and mounted the sysytem and the commands were executed without any problem except for "su" which says "not found". Other commands seem to work and the last three commands each of the says "100% completed" in the shell. So there doesn't seem to be a problem in the execution of these commands but su doesn't work though. That can be the problem. But I have windows 8 and when I pasted the code in cmd admin , it doesn't recognize so I can't do it that way

munirshah77 said:
If I paste my code in cmd it doesn't recognize the command. I downloaded adb ,extracted it and then use shell to enter commands one by one and I connected the phone and mounted the sysytem and the commands were executed without any problem except for "su" which says "not found". Other commands seem to work and the last three commands each of the says "100% completed" in the shell. So there doesn't seem to be a problem in the execution of these commands but su doesn't work though. That can be the problem. But I have windows 8 and when I pasted the code in cmd admin , it doesn't recognize so I can't do it that way
Click to expand...
Click to collapse
Bro w8 does not detect our Pico so u hv to use w7 or xp n that three Cmd said 100 percent dat means ur nand is recovered nw install Cm9 bt make clean installation dat it:thumbup:
Sent from my HTC Explorer A310e using xda premium

9282gkg said:
Bro w8 does not detect our Pico so u hv to use w7 or xp n that three Cmd said 100 percent dat means ur nand is recovered nw install Cm9 bt make clean installation dat it:thumbup:
Sent from my HTC Explorer A310e using xda premium
Click to expand...
Click to collapse
9282gkg said:
Bro w8 does not detect our Pico so u hv to use w7 or xp n that three Cmd said 100 percent dat means ur nand is recovered nw install Cm9 bt make clean installation dat it:thumbup:
Sent from my HTC Explorer A310e using xda premium
Click to expand...
Click to collapse
Whenever I flash a new rom I wipe each and everything. SO, there is not a problem as far as that is concerned. I tried wipe system command in adb shell and even in terminal emulator in twrp and it gives error wiping a number of memory allocations. Should I try the whole procedure on windows 7?

munirshah77 said:
Whenever I flash a new rom I wipe each and everything. SO, there is not a problem as far as that is concerned. I tried wipe system command in adb shell and even in terminal emulator in twrp and it gives error wiping a number of memory allocations. Should I try the whole procedure on windows 7?
Click to expand...
Click to collapse
S u should try it on w7
Sent from my HTC Explorer A310e using xda premium

Windows 8 had issue with the htc drivers.. i think updating the drivers to newer version will fix the problem in windows 8 itself..

cm10 roms don't flash. Status 7 error

I would like to explain my problem here. Almost two weeks ago I guess I flashed sense 4 build 7 by derefas and I guess i had a nand burn. No rom flashed at that time like cm10 roms. cm9 rom flashed but there were a lot of FC's at startup so I couldn't use them. Xenon rom and Ateeq rom only worked for me at that time but internal memory was very large and there was only 40 mb free space. Then I followed this guide by cute_prince
Ok guys, here I am posting NAND Recovery Procedure:
Download the following attachment.. Rename flash_erase.txt to flash_erase ( Its actually a binary file )
Copy this file to /system/xbin directory using Root Explorer. Set permission as 755
Make sure Root Access is enabled for both Apps and ADB in Developer settings
Connect phone to PC .. Now open a terminal ( I am using Ubuntu ) and type the following:
Code:
adb shell
su
cd /system/xbin
./flash_erase -N /dev/mtd/mtd2 0 0
./flash_erase -N /dev/mtd/mtd4 0 0
./flash_erase -N /dev/mtd/mtd5 0 0
Note: when you execute above command you may get an IO error.. Its OK, dont get panic
Now disconnect phone from PC.. Remove battery and reinsert it ..
Goto recovery and:
format /boot
format /system
wipe data / factory reset
Now install your favourite ROM
Once the ROM is booted, goto storage settings.. Everything should be fine now and you should get around 140MB free depending on your ROM
and then then the less internal memory problem at boot and fc's in cm9 rom, these problems were solved but the problem that cm10 roms don't flash and error appears like this one
"symlinks failed
file at bla bla bla couldn't be flashed
status 7"
This problem still persists while installing any jelly bean rom not for ics and sense roms flash but they simply bootloop. At htc beats audio screen they don't go any further.
please help me. I am stuck with this problem now for weeks now. Someone please end my misery.:crying::crying::crying::crying::crying::crying:

Possible method
Steps that I would recommend:
1. Remove the sd-ext, and format the SD-card.
1.5: Create a new sd-ext with an ext4 partition using any partition manager apps.
2. Get a superwipe.zip, by akya22, and get it onto your Sd card by any means available.
3. Redownload Beta #6, super-stripped gapps, and get them on your sd card.
4. Insert SD card in your phone.
5. Go to fastboot and flash a new recovery, twrp 2.4 , preferably, because it's official.
6. Reboot your phone using fastboot reboot command.
7. Go to recovery, and flash superwipe.zip.
8. Go to Wipe section, and wipe Cache, Dalvik cache, for security.
9. Do a factory reset once more, for security.
10. Flash CM10 first, and check if it gets flashed correctly.
11. Flash Gapps.
12. Reboot.
Don't think your NAND is burnt because less than 50 percent of memory is available in your device, after flashing CM10. It is normal.
If all these steps get executed correctly, then...
1. Install Solid Explorer on your device. It is the best app for adding scripts.
2. Get an int2ext+ or int2ext (recommended)(i am using beta #6 with int2ext) script by croniccorey.
3. Extract the script to the root of your SD Card. Its name would be "40int2ext", and can be found in the /system/etc/init.d/ folder of the zip file.
4. Open the ROM's zip file in one pane.
5. Browse to /system/etc/init.d . There will already be two files present.
6. Drag and drop the 40int2ext into this folder, from the other pane.
7. Now, if you see that there are 3 files in this folder, the script has been added.
8. Reboot into recovery and flash this ROM.
P.S.: Did you follow the NAND recovery procedure correctly?

[TOOL][Windows]OneClick Bootanimator For Pico

Hey Guys , I have made a tool to change the bootanimation of our pico from windows only. Now There Is No Need to goto your mobile and open your file explorer and doing all the work to change a bootanimation.By this tool you can change your bootanimation by just a single click.:laugh:
Requirements:
ADB/Fastboot
Follow This Guide:
http://forum.xda-developers.com/showthread.php?t=1955627
Thanks To Andy For Such An Easy Guide.
This Tool Works with all The Roms Except Stock Rom
For Sense4 Roms:
1.Download The File bootaniflasher[Sense 4] From here
2. Extract It on Your Pc.
3. Open Folder bootaniflasher[sense4].
4. Now Just Place The bootanimation you want and name it as hTC_bootup.zip
5. Now Run The bootani.bat and press Enter.[Make Sure USB Debugging is Enabled]
6. Your Device Will Reboot Automatically
For CM Roms:
1. Download The File bootaniflasher[CM] From here
2. Extract It on Your PC.
3. Open Folder bootaniflasher[CM].
4. Now Just Place The bootanimation you want and name it as bootanimation.zip
5. Now Run The bootani.bat and press enter.[make sure USb Debugging is Enabled].
6. Your Device will Reboot Automatically.
This Is My First Tool . Please Try It And Tell If Its Working Or Not Waiting For The Responses.
Note: If You want this tool for any other rom eg AOKP,Panadroid, etc. Just PM me the Source/directory where the bootanimation is stored.
Hit Thanks If I Helped You

Reserved :thumbup:
Sent from my HTC Explorer using xda app-developers app

Do we need to mount...like R/O ??
Sent from my HTC Explorer A310e using xda app-developers app

new_ay said:
Do we need to mount...like R/O ??
Sent from my HTC Explorer A310e using xda app-developers app
Click to expand...
Click to collapse
Yes .. two R/W ... :thumbup:
Sent from my HTC Explorer using xda app-developers app

Dude sometimes i just get a black screen instead of the bootanimation!! could you plZ temme what am i doin wrong??
Sent from my HTC Explorer A310e using xda premium

salil.bajaj said:
Dude sometimes i just get a black screen instead of the bootanimation!! could you plZ temme what am i doin wrong??
Sent from my HTC Explorer A310e using xda premium
Click to expand...
Click to collapse
Which Rom Are You using ???

Guys Plz Do A review???

Saumitra Yadav said:
Which Rom Are You using ???
Click to expand...
Click to collapse
cm10 beta6
Sent from my HTC Explorer A310e using xda premium

salil.bajaj said:
cm10 beta6
Sent from my HTC Explorer A310e using xda premium
Click to expand...
Click to collapse
Use the tool for CM and make sure your bootanimatiom name should be bootanimatiom.zip :thumbup:
Sent from my HTC Explorer using xda app-developers app

To Saumitra Yadav:
My antivir blocks your zip file and write me this "Win32/Ramnit.H virus". Is this normal and just error of my antivirus, or it is really infected?

Matysek1984 said:
To Saumitra Yadav:
My antivir blocks your zip file and write me this "Win32/Ramnit.H virus". Is this normal and just error of my antivirus, or it is really infected?
Click to expand...
Click to collapse
The file is not infected bro .... it's your antivirus defect .... I use avast and I got no error.... try this tool n give a review :thumbup:
Sent from my HTC Explorer A310e using xda app-developers app

Saumitra Yadav said:
The file is not infected bro .... it's your antivirus defect .... I use avast and I got no error.... try this tool n give a review :thumbup:
Sent from my HTC Explorer A310e using xda app-developers app
Click to expand...
Click to collapse
Maybe it is error of my antivirus (ESET Smart Security). I already installed your bootanim manually, it looks very good, nice work

Matysek1984 said:
Maybe it is error of my antivirus (ESET Smart Security). I already installed your bootanim manually, it looks very good, nice work
Click to expand...
Click to collapse
Try this tool to install in just a single click by this tool :thumbup:
Sent from my HTC Explorer A310e using xda app-developers app

Saumitra Yadav said:
Try this tool to install in just a single click :thumbup:
Sent from my HTC Explorer A310e using xda app-developers app
Click to expand...
Click to collapse
Sent from my HTC Explorer A310e using xda app-developers app

Thanks

A couple of reasons why this tool "might" not work:
Hi! First of all, I haven't tried out this "tool" yet, as I don't have windows :silly:
But, there are a couple of reasons why I think that your tool "might" not work at all times.
First of all, enabling "USB Debugging" alone is not enough. You need to configure root access for both "Apps and ADB" in the case of CyanogenMod. (AOKP provides root access by default, so, it wouldn't be a problem in the case of AOKP.)
After enabling root access to both "Apps and ADB", you "might" need to invoke "su" at least once. And, mounting the /system partition as r/w is a "must-do".
I have made some changes to the code, using this guide (http://forum.xda-developers.com/wiki/Guide:Using_the_Terminal) as reference.
Code:
@ECHO OFF
COLOR 9b
ECHO OneClick Bootanimator For HTC EXPLORER[CM Roms]
ECHO By: Saumitra Yadav
ECHO Make sure your phone has usb debugging mode enabled!
ECHO Make sure you put your custom bootanimation.zip in this folder!
ECHO Use this at your own risk!
ECHO .
ECHO .
ECHO By pressing enter you understand the risks.
PAUSE
ECHO Waiting for device...
ECHO.
adb wait-for-device
ECHO Mounting /system partition as r/w...
adb shell su
adb shell mount -o rw,remount -t yaffs2 system /system
ECHO Sending bootanimation.zip
ECHO.
adb push bootanimation.zip /system/media/bootanimation.zip
ECHO Done sending bootanimation.zip
ECHO.
ECHO Mounting /system partition as r/o...
adb shell mount -o ro,remount -t yaffs2 system /system
ECHO Rebooting device...
adb reboot
ECHO Reboot command initiated.
ECHO Thanks for using this script.
PAUSE
EXIT
And, a humble request... Do try to keep the code understandable. Example: The output "Finished re-booting" comes before the script initiates rebooting sequence.
Do let me know if this works

vineethraj49 said:
Hi! First of all, I haven't tried out this "tool" yet, as I don't have windows :silly:
But, there are a couple of reasons why I think that your tool "might" not work at all times.
First of all, enabling "USB Debugging" alone is not enough. You need to configure root access for both "Apps and ADB" in the case of CyanogenMod. (AOKP provides root access by default, so, it wouldn't be a problem in the case of AOKP.)
After enabling root access to both "Apps and ADB", you "might" need to invoke "su" at least once. And, mounting the /system partition as r/w is a "must-do".
I have made some changes to the code, using this guide (http://forum.xda-developers.com/wiki/Guide:Using_the_Terminal) as reference.
Code:
@ECHO OFF
COLOR 9b
ECHO OneClick Bootanimator For HTC EXPLORER[CM Roms]
ECHO By: Saumitra Yadav
ECHO Make sure your phone has usb debugging mode enabled!
ECHO Make sure you put your custom bootanimation.zip in this folder!
ECHO Use this at your own risk!
ECHO .
ECHO .
ECHO By pressing enter you understand the risks.
PAUSE
ECHO Waiting for device...
ECHO.
adb wait-for-device
ECHO Mounting /system partition as r/w...
adb shell su
adb shell mount -o rw,remount -t yaffs2 system /system
ECHO Sending bootanimation.zip
ECHO.
adb push bootanimation.zip /system/media/bootanimation.zip
ECHO Done sending bootanimation.zip
ECHO.
ECHO Mounting /system partition as r/o...
adb shell mount -o ro,remount -t yaffs2 system /system
ECHO Rebooting device...
adb reboot
ECHO Reboot command initiated.
ECHO Thanks for using this script.
PAUSE
EXIT
And, a humble request... Do try to keep the code understandable. Example: The output "Finished re-booting" comes before the script initiates rebooting sequence.
Do let me know if this works
Click to expand...
Click to collapse
Will try it when i reach home :thumbup:
Sent from my HTC Explorer A310e using xda app-developers app

Saumitra Yadav said:
Will try it when i reach home :thumbup:
Sent from my HTC Explorer A310e using xda app-developers app
Click to expand...
Click to collapse
I think the mounting is needed in stock rom coz in all custom roms the system is mounted as r/w .
PS: Now this tool will work on stock also ... coz you edited the script thanks :thumbup:
Sent from my HTC Explorer A310e using xda app-developers app

[SCRIPT] Recovery & Kernel Management Tool

Hi guys,
I had some free time and decided to write this script specially for Terminal Emulator's users like me.
It's a simple script allows you to:
Backup
Restore backup
Flash
Reboot in any mode
Copy the script to /system/bin
recovery and /or kernel IMG files without the need to input so long codes again and again.
This script will make a new folder named Recovery-Kernel-Tools in your internal storage, including 3 more folders inside it:
Backups (max one backup for each partition, names are "case-sensitive")
Flash (but any recovery.img / boot.img to flash them, names are "case-sensitive")
Input (for future use)
Everything is self explanatory, when you execute this script for the first time, it will ask you to set your partitions, you can change them later at any time.
If it's useful for you and you need more options, feel free to suggest me.
Download link: ReKeTv1
After downloading, cd to installation folder and input:
Code:
su
sh ReKeTv1
If you're using Script Manager, just execute it as root.
Latest busybox is required.

Bassel Bakr said:
Hi guys,
I had some free time and decided to write this script specially for Terminal Emulator's users like me.
It's a simple script allows you to:
Backup
Restore backup
Flash
Reboot in any mode
Copy the script to /system/bin
recovery and /or kernel IMG files without the need to input so long codes again and again.
This script will make a new folder named Recovery-Kernel-Tools in your internal storage, including 3 more folders inside it:
Backups (max one backup for each partition, names are "case-sensitive")
Flash (but any recovery.img / boot.img to flash them, names are "case-sensitive")
Input (for future use)
Everything is self explanatory, when you execute this script for the first time, it will ask you to set your partitions, you can change them later at any time.
If it's useful for you and you need more options, feel free to suggest me.
Download link: ReKeTv1
After downloading, cd to installation folder and input:
Code:
su
sh ReKeTv1
If you're using Script Manager, just execute it as root.
Latest busybox is required.
Click to expand...
Click to collapse
There are three files in it...which 1 to download?
Sent from my GT-S7500 using Tapatalk 2

tandon.ayush said:
There are three files in it...which 1 to download?
Sent from my GT-S7500 using Tapatalk 2
Click to expand...
Click to collapse
ReKeTv1
Don't forget to leave some suggestions.

Bassel Bakr said:
ReKeTv1
Don't forget to leave some suggestions.
Click to expand...
Click to collapse
Tried with both terminal emulator and script manager
Got this error
" exec /system/bin/sh '/mnt/sdcard/download/ReKeTv1.txt'
# bin/sh '/mnt/sdcard/download/ReKeTv1.txt'
head: /mnt/sdcard/Recovery-Kernel-Tools/partitions: No such file or directory
tail: can't open '/mnt/sdcard/Recovery-Kernel-Tools/partitions': No such file or directory
tail: no files
Root access denied!
Please issue su command first"
Any solution?
Sent from my GT-S7500 using Tapatalk 2

tandon.ayush said:
Tried with both terminal emulator and script manager
Got this error
" exec /system/bin/sh '/mnt/sdcard/download/ReKeTv1.txt'
# bin/sh '/mnt/sdcard/download/ReKeTv1.txt'
head: /mnt/sdcard/Recovery-Kernel-Tools/partitions: No such file or directory
tail: can't open '/mnt/sdcard/Recovery-Kernel-Tools/partitions': No such file or directory
tail: no files
Root access denied!
Please issue su command first"
Any solution?
Sent from my GT-S7500 using Tapatalk 2
Click to expand...
Click to collapse
Run as root
Or in terminal emulator type
su
First

Bassel Bakr said:
Run as root
Or in terminal emulator type
su
First
Click to expand...
Click to collapse
Did both...still the same error
Any solution??
Sent from my GT-S7500 using Tapatalk 2

tandon.ayush said:
Did both...still the same error
Any solution??
Sent from my GT-S7500 using Tapatalk 2
Click to expand...
Click to collapse
In terminal emulator:
su
set -x
sh ReKeTv1 2> /sdcard/log1.txt
sh -n ReKeTv1 2> /sdcard/log2.txt
Then upload log1.txt & log2.txt files here.

Bassel Bakr said:
In terminal emulator:
su
set -x
sh ReKeTv1 2> /sdcard/log1.txt
sh -n ReKeTv1 2> /sdcard/log2.txt
Then upload log1.txt & log2.txt files here.
Click to expand...
Click to collapse
"No such file or directory"in both logs
Sent from my GT-S7500 using Tapatalk 2

tandon.ayush said:
"No such file or directory"in both logs
Sent from my GT-S7500 using Tapatalk 2
Click to expand...
Click to collapse
After set -x cd to installation directory then complete the code.