Hi.
Wondering about this:
I have no need for lot's of storage. Since this is the case, am I better off (speed-wise) not using an external card at all, as internal phone memory (flash) is much faster?
Thanks
I'm using a Class 6 8GB MicroSD Card... I store my music on my internal, and everything else on my SD. I notice no difference in speed. They're both flash memory. haha
benyben123 said:
Hi.
Wondering about this:
I have no need for lot's of storage. Since this is the case, am I better off (speed-wise) not using an external card at all, as internal phone memory (flash) is much faster?
Thanks
Click to expand...
Click to collapse
Get a SD card. Backing up apps and roms takes space. You want the backups to be seperate from the phone. If everything goes helter skelter you can restore your backup.
I have tried using ES file explorer, the Asus file manager, and FX file explorer. I get a copy failed message every time I try to copy a file to the removable SD card.
Anyone else have this issue?
You can't know your limits until you exceed them.
duckredbeard said:
I have tried using ES file explorer, the Asus file manager, and FX file explorer. I get a copy failed message every time I try to copy a file to the removable SD card.
Anyone else have this issue?
You can't know your limits until you exceed them.
Click to expand...
Click to collapse
Have you tried to reformat the card with fat32?
I just did. Seems I'm only having issues with the 32 GB size cards. Acting like they are read only. Can't find such a setting anywhere. Is there another format that should work?
You can't know your limits until you exceed them.
duckredbeard said:
I just did. Seems I'm only having issues with the 32 GB size cards. Acting like they are read only. Can't find such a setting anywhere. Is there another format that should work?
You can't know your limits until you exceed them.
Click to expand...
Click to collapse
Have you tried with the latest kernel (JB version .25) and what make and model of your sdcard? just wonder if compability issue and are we talking about Micro sdcard or full size sdcard? On the full size there is a little switch on the side to block writting to the card.
I'm only having issues when I'm using the tablet to copy files. I'm on CleanROM Inheritance. I don't recall if I had this issue with the stock rom. Sometime tonight I will make a backup of my current and then flash to stock rom. Since I'm talking about the removable SD card, it could only be the micro SD that is installed in the tablet. There is no switch on that card.
Sent from my HTC PH39100 using xda app-developers app
I think flashing the _that nodpi kernel should resolved your issue, give it a try.
Sent from my ASUS Transformer Pad TF700T using xda premium
Link to said kernel?
You can't know your limits until you exceed them.
duckredbeard said:
Link to said kernel?
You can't know your limits until you exceed them.
Click to expand...
Click to collapse
download this http://d-h.st/M6j then flash with twrp, during the install pick _that_nodpi_stock kernel.
That did it. Did it replace the overclock kernal I selected when I flashed CROMI 3.2?
Sent from my HTC PH39100 using xda app-developers app
duckredbeard said:
That did it. Did it replace the overclock kernal I selected when I flashed CROMI 3.2?
Sent from my HTC PH39100 using xda app-developers app
Click to expand...
Click to collapse
Yes, it replaced what ever kernel you selected during cleanrom installation. Since it stock kernel, you can no longer Overclock.
Is there another kernel that can be the fix and still give us over clock?
You can't know your limits until you exceed them.
duckredbeard said:
Is there another kernel that can be the fix and still give us over clock?
You can't know your limits until you exceed them.
Click to expand...
Click to collapse
Sorry but nope, I believe as soon as Asus release source code, _that is going to make an OC version for this and it's going to be awsome. For now we just have to wait.
Similar Problem With A Samsung Micro SD Card
duckredbeard said:
That did it. Did it replace the overclock kernal I selected when I flashed CROMI 3.2?
Sent from my HTC PH39100 using xda app-developers app
Click to expand...
Click to collapse
Hi.
I'm having a problem with my Samsung Micro SDXC I (Class 10) card. I've been messing abut with it for days now, formatting, re-formatting in exFAT, FAT32, NTFS but the problem persists; whenever I try to copy data across to the card, the first time the card is inserted, it starts to copy, sometimes even up to 1.5Gb of data but often much less, but then gives me a 'Write Error' or 'I/O Error' message & stops working. Sometimes it also deletes other data on the card when the error occurs. then, until I unmount the card again, it barely functions at all!
A big factor in buyinh this tablet, unlocking, then rooting it was so that I'd have an awesome, small, tablet that had loads of storage & could be transported around very easily. If I can't get the cards to work with it, that's a big part of it's usefulness to me down the drain.
I tried to download the kernal that was mentioned above the message of yours that I'm replying to but the file has been moved. Do you still have it?.......or know how I can resolve my problem without it?
Any help would be much appreciated.
Thanks.
dan5001 said:
Hi.
I'm having a problem with my Samsung Micro SDXC I (Class 10) card. I've been messing abut with it for days now, formatting, re-formatting in exFAT, FAT32, NTFS but the problem persists; whenever I try to copy data across to the card, the first time the card is inserted, it starts to copy, sometimes even up to 1.5Gb of data but often much less, but then gives me a 'Write Error' or 'I/O Error' message & stops working. Sometimes it also deletes other data on the card when the error occurs. then, until I unmount the card again, it barely functions at all!
A big factor in buyinh this tablet, unlocking, then rooting it was so that I'd have an awesome, small, tablet that had loads of storage & could be transported around very easily. If I can't get the cards to work with it, that's a big part of it's usefulness to me down the drain.
I tried to download the kernal that was mentioned above the message of yours that I'm replying to but the file has been moved. Do you still have it?.......or know how I can resolve my problem without it?
Any help would be much appreciated.
Thanks.
Click to expand...
Click to collapse
You don't say which rom or firmware you are currently using. Without knowing that I wouldn't go blindly flashing kernels that are nearly a year old
It could be that your card is actually damaged as I can copy files just fine on mine. I'm using a SanDisk Ultra uhs-1.
ROM & Firmware
sbdags said:
You don't say which rom or firmware you are currently using. Without knowing that I wouldn't go blindly flashing kernels that are nearly a year old
It could be that your card is actually damaged as I can copy files just fine on mine. I'm using a SanDisk Ultra uhs-1.
Click to expand...
Click to collapse
Hi sbdags,
Roger that
I'm not bad with most things tecchie but whilst I know which ROM I'm using, I'm not sure what the firmware is.
I recently updated to CROMI-X 5.2.2 from an earlier version in the hope that that might include an update or something that would solve my SD card problem.......it didn't
With regard to 'Firmware', I'm not sure where that's listed on the tablet but in the 'About' tab in my settings, it says:
Android Version - 4.2.1
Kernal Version - 3.1.10-g215ae8bf [email protected] # 1
Build Number - TF700 CHROMI-X 5.2.2 - 10.6.1.27.5 WW DEODEX
Pad EC Version - PAD-EC20T-0216
MobileDock Version - DOCK-EC20N-0207
I hope the firmware information you need is in there somewhere?
The card I bought is the latest 64Gb Samsung Micro SDXC Pro UHS-1 (Class 10) with write speeds of 20Mb/s & 70Mb transfer speed. I had read the formums & was torn between this card & the SanDisk 64Gb Ultra Micro SDXC (Class 10), the two-tone red/grey version, presumably like the one you're using but the Samsung was faster & at the time I bought it, the Samsungwas almost £15 cheaper. Since they were both reported to work, I opted for the Samsung card; maybe that was a bad decision?
I've just ordered the SanDisk 64Gb card, in the hope that that one will work because as i said, it really would be a shame if I can't make use of the extended storage that the SD crads give.
Do you use your SanDisk card in Micro SD form in the tablet or SD form in the dock.....or both......& have you got them formatted to exFAT or some other format?
Thanks again for your attention.
dan5001 said:
Hi sbdags,
Roger that
I'm not bad with most things tecchie but whilst I know which ROM I'm using, I'm not sure what the firmware is.
I recently updated to CROMI-X 5.2.2 from an earlier version in the hope that that might include an update or something that would solve my SD card problem.......it didn't
With regard to 'Firmware', I'm not sure where that's listed on the tablet but in the 'About' tab in my settings, it says:
Android Version - 4.2.1
Kernal Version - 3.1.10-g215ae8bf [email protected] # 1
Build Number - TF700 CHROMI-X 5.2.2 - 10.6.1.27.5 WW DEODEX
Pad EC Version - PAD-EC20T-0216
MobileDock Version - DOCK-EC20N-0207
I hope the firmware information you need is in there somewhere?
The card I bought is the latest 64Gb Samsung Micro SDXC Pro UHS-1 (Class 10) with write speeds of 20Mb/s & 70Mb transfer speed. I had read the formums & was torn between this card & the SanDisk 64Gb Ultra Micro SDXC (Class 10), the two-tone red/grey version, presumably like the one you're using but the Samsung was faster & at the time I bought it, the Samsungwas almost £15 cheaper. Since they were both reported to work, I opted for the Samsung card; maybe that was a bad decision?
I've just ordered the SanDisk 64Gb card, in the hope that that one will work because as i said, it really would be a shame if I can't make use of the extended storage that the SD crads give.
Do you use your SanDisk card in Micro SD form in the tablet or SD form in the dock.....or both......& have you got them formatted to exFAT or some other format?
Thanks again for your attention.
Click to expand...
Click to collapse
Well the ROM is mine so you are all good there. Lol. I only use fat32 as that is how the cards come.
Are you copying the files in esfileexplorer? Are they single files? Total size?
File Sizes
sbdags said:
Well the ROM is mine so you are all good there. Lol. I only use fat32 as that is how the cards come.
Are you copying the files in esfileexplorer? Are they single files? Total size?
Click to expand...
Click to collapse
Hi sbdags.
I've tried using both the File Explorer that was included with CHROMI-X & another one from the Play Store that I use on my phone called Astro; the same thing happens with both. As I say, the card seemed okay to begin with but all I had put on it was my Nandroid & Titanium backups (approx. 2Gb total with lots of small files included). The problems started when I tried to copy a season of a TV series onto the card to free up space on the internal SD card. It started off okay & I wasn't expecting any problems but then approx 1.5Gb, I got an I/O write error & then all the problems I described in my first post.
As an aside, the card performed best when formatted to FAT32 but according to the SD Card Association, SDXC cards come formatted as exFAT, so that's how it's currently formatted; I thought if that's how it came & it initially worked okay, maybe that would solve the issue. Again, I was wrong!
So, I'll format it back to FAT32 again but as I've already had it in that format, I wouldn't anticipate any change to the card's behaviour.
The 64Gb SanDisk card should be here in a few days, so I'll be able to report on whether that one works or not then.
Did you have to re-format yours when you first got it or are the SD Card Association talking nonsense? Oh, & you didn't say whether you're able to use your cards in both micro form in the pad &/or full-size form in the dock? Also, was the Firmware information you asked for in that mass of stuff I listed. If not, where do I find it, so I know for the next time you ask
Thanks again
dan5001 said:
Hi sbdags.
I've tried using both the File Explorer that was included with CHROMI-X & another one from the Play Store that I use on my phone called Astro; the same thing happens with both. As I say, the card seemed okay to begin with but all I had put on it was my Nandroid & Titanium backups (approx. 2Gb total with lots of small files included). The problems started when I tried to copy a season of a TV series onto the card to free up space on the internal SD card. It started off okay & I wasn't expecting any problems but then approx 1.5Gb, I got an I/O write error & then all the problems I described in my first post.
As an aside, the card performed best when formatted to FAT32 but according to the SD Card Association, SDXC cards come formatted as exFAT, so that's how it's currently formatted; I thought if that's how it came & it initially worked okay, maybe that would solve the issue. Again, I was wrong!
So, I'll format it back to FAT32 again but as I've already had it in that format, I wouldn't anticipate any change to the card's behaviour.
The 64Gb SanDisk card should be here in a few days, so I'll be able to report on whether that one works or not then.
Did you have to re-format yours when you first got it or are the SD Card Association talking nonsense? Oh, & you didn't say whether you're able to use your cards in both micro form in the pad &/or full-size form in the dock? Also, was the Firmware information you asked for in that mass of stuff I listed. If not, where do I find it, so I know for the next time you ask
Thanks again
Click to expand...
Click to collapse
I've never tried my card in the dock to be honest. Both my cards; 32GB and 64GB are SanDisk, I am not sure now what they cam in but I am using fat32 as I formatted them myself.
As for the stuff you posted I just wanted to know the rom and bootloader version. So CROMi-X 5.2.2 on 10.6.1.14.10 would have ben enough. Maybe the kernel helps too. In your case you are using the stock kernel. You may get better results on thatv4 kernel?
SD Cards & Kernels
sbdags said:
I've never tried my card in the dock to be honest. Both my cards; 32GB and 64GB are SanDisk, I am not sure now what they cam in but I am using fat32 as I formatted them myself.
As for the stuff you posted I just wanted to know the rom and bootloader version. So CROMi-X 5.2.2 on 10.6.1.14.10 would have ben enough. Maybe the kernel helps too. In your case you are using the stock kernel. You may get better results on thatv4 kernel?
Click to expand...
Click to collapse
Cheers.
So, I think I've grasped that the kernel is similar to the BIOS on a PC; is that correct?
When you say that I may get better results using _that's v.4 kernel, what improvements are you thinking I might see?
dan5001 said:
So, I think I've grasped that the kernel is similar to the BIOS on a PC; is that correct?
Click to expand...
Click to collapse
Not really, the kernel is ... the kernel. The core of the operating system. Under Windows it's ntoskrnl.exe.
You could compare the bootloader with the PC BIOS - its main function (nowadays) is to start the operating system.
Hi,
I'm having troubles installing CROMI 5.4 to my SD card (Sandisk).
Installed on internal memory, installed to SD via ROM2SD.
When installing with rom2sd i get the message that installation is finished and then i can click on "Save Logs" and "Next".
When pressing one of those buttons the tab freezes (TF700) and i have to do a hard reset.
Then the tablet keeps starting up on my internal memory.
I have a 64 gb sd card with 3 partitions: FAT (named SD), EXT4 (DATA) and EXT4 (SYSTEM).
Can anyone give any suggesttions how to resolve my problem?
Kind regards
kjell
Another try
Still no luck
Really looking forward to using ROM2SD
TheProfessorODK said:
Still no luck
Click to expand...
Click to collapse
As my TF700 is too sluggish, even with CROMI
After finding my infinity collecting dust on a shelf, I've decided to boot it up and start flashing again. Looking to flash ZOMBi-POP OMNI KANG BETA 6 5.10r5.
I've seen in most ROM threads about using Data/ROM2SD to improve performance because the TF series of tablets suffer with below par eMMC.
Questions:
1. Is it worth it? Is it difficult?
2. What's the difference between Data2SD and ROM2SD? Which is better?
3. What is the recommended size microSD card (Class 10) to buy?
4. Will I still be able to put media on the internal memory? Or is everything better being put on the memory card?
Current bootloader: 10.6.1.14.10-20130601
Current ROM: ZOMBi-POP 5.0.2 Omni Deodex
All information is appreciated, I have no idea about this stuff....
1. Sometimes. No
2. data2sd = /data on a microSD that is fater than your internal storage.
rom2sd = /data and /system are on the microSD. No speed/performance boost above data2sd but gives you dual boot capability: One rom on internal, another running off the external card. rom2sd is basically data2sd + system2sd.
IMHO rom2sd is useful if you want and need a reliable daily driver rom on internal, but you also want to play around with another rom or version thereof without having to nandroid/restore your daily driver.
3. Class 10 Samsung Evo or Scandik Ultra are good.
4. Your internal storage is accessible as storage space
Data2sd has been a great improvement on this tablet until ZOMBi-POP b4 or so. I do not see a performance boost on data2sd anymore IF internal data is on the f2fs file system. Maybe better benchmarks but my user experience is just as good with internal /data f2fs.
ZOMBi-POP loves f2fs, runs much better on it than on ext4.
For intsructions how to get to internal /data on f2fs with ZOMbi-POP read this post:
http://forum.xda-developers.com/showpost.php?p=60293631&postcount=2