after i updated my asus TF700 to cromi 4.6.6 JB 4.2.1 it seems my Tablet seems to have become unrooted, fstrim doesnt work says it requires root access, iv since rerooted with te motochopper had no issues rerooting, after restart it still wouldnt let me use fstrim becuase it wasnt supported on partiton $list$ says its either a hardware or kernal error and cannot be worked around.
CROMiX, like any custom rom, is always rooted.
You may have a conflict of SuperUser and SuperSU being present on your system at the same time???
Sounds to me as if it is time for a clean install....
Sent from my ASUS Transformer Pad TF700T using Tapatalk HD
i did a nice clean install
i wiped the tablet a few times, installed the rom from sd card. i did have super user but the issue only started happening recently, i uninstalled and updated super user, but i could install the nightlys and see if it fixes the issues,
If the tablet is not rooted then either you have a problem with twrp flashing the ROM (it will warn you if the ROM is not rooted), so what version of twrp are you on? Or you have something else installed to data that is conflicting with supersu applying root privileges.
Related
I rooted my transformer using this method: http://forum.xda-developers.com/showthread.php?t=1125714. It was before the 8.4.4.11 update (which I didn't receive) so that is not what matters. I decided that I will go and flash the prime 1.5 rom and cwm recovery. At first, all I did was just root without even installing clockworkmod recovery, so I am running stock 3.1. Does anyone here recommend using the ClockworkMod 3.1.0.1-solarnz-R3 recovery? I have read that there can be some issues, but those peoples problems might not exactly pertain to me. I don't know If I might have different results.
I have flashed my device countess times with CWM and backed up and restored my device several more and have yet to run into a single problem. I would highly recommend it. And going with the modded version has the added benefit of keeping your files on the internal storage safe from data wiping. Give it a shot you won't regret it.
hey guys,
I'm trying to do a backup through CWM before I flash CleanROM and start tinkering with some stuff. The issue I'm having is when I try to backup it gives me an error saying "error backing up boot image!!"
I've done plenty of backups through CWM in the past and never has this issue, anyone have a solution? I have no problem wiping out/re-flashing if necessary but I want a backup before I do all that!
I have CWM version 5.5.0.4 on my TF300T running CM9 at the moment. Could this issue have been caused by when I reverted back to stock about a week ago, and broke something?
That necessitates another question then: if I copy/paste the structure of my internal memory card manually to my computer, and then do whatever I want on the tablet, can I just restore that backup and pick up where I left off? Or will it break dependencies and whatnot?
My other question is how do I get started with custom kernels? ROM's seem to be a dime a dozen but I can't find very many kernels, and I don't have the slightest clue where to start with them.
Last question is, since CWM is giving me issues can I just flash over the existing CWM install with the new CWM touch version, or will that break something/make me lose my backups/etc?
Any help is appreciated
-Opethfan89
Realization: I'm actually running CWM 5.8.3.4 and I just realized that when I installed ROM Toolbox it let me update CWM and after that update is when I started running into these issues. So the same question then remains, if I just flash the older CWM over my current install, will that wipe out everything or will it retain whats there and just overwrite my CWM install?
dump CWM altogether and use TWRS!
Sent from my ASUS Transformer Pad TF300T using Xparent Red Tapatalk 2
I might try TWRS but I want to try the CWM touch version first before I change. As it turns out, I just flashed the v5.5.0.4 over my current install and it worked fine and I'm backing up my install at the moment. Seems it might have been an error in the 5.8 version of CWM that was causing my grief. So that resolves two of my issues, my question about the kernels still remains if anyone can shed some light.
i havent tried the touch CWM. i just wish the keyboard worked in recovery, that would be awesome!
Sent from my ASUS Transformer Pad TF300T using Xparent Red Tapatalk 2
Which recovery? TWRS? or CWM?
I just got my TF700 the other day. I was able to downgrade to .30, root, and unlock the bootloader without incident. I just pushed CWM per this thread: http://forum.xda-developers.com/showpost.php?p=31556045&postcount=1. I tried booting into CWM, got the standard quick vibration but the tablet was dead after that. I messed around for a while and finally after holding the power button several times in a row, it booted as normal. Battery is at 80%
Before I go any further, what just happened? Can I push CWM again the same way to re-install it? How should I proceed?
FWIW, the checksum for download 1 on the page mentioned only matched the checksum for #2. I used #2 because it matched its MD5 as it was listed on the page.
lowriderdog37 said:
I just got my TF700 the other day. I was able to downgrade to .30, root, and unlock the bootloader without incident. I just pushed CWM per this thread: http://forum.xda-developers.com/showpost.php?p=31556045&postcount=1. I tried booting into CWM, got the standard quick vibration but the tablet was dead after that. I messed around for a while and finally after holding the power button several times in a row, it booted as normal. Battery is at 80%
Before I go any further, what just happened? Can I push CWM again the same way to re-install it? How should I proceed?
FWIW, the checksum for download 1 on the page mentioned only matched the checksum for #2. I used #2 because it matched its MD5 as it was listed on the page.
Click to expand...
Click to collapse
The proper way to do this is to upgrade to the latest stock JB (10.4.4.25), unlock, and you can either fastboot the recovery or unlock it be flashing Superuser. It is not advised to downgrade,even if it seems easier, because if you do it the way I stated, everything will be latest and should not have any problems whatsoever. since you downgraded to ICS, you now have a ICS bootloader. an ICS bootloader will not boot JB, nor vice versa. so now you will need to flash a JB bootloader, which will not boot the stock ICS, so you will now need Cromi, Cyanogen,or another custom rom to get it update with JB. Make sure you have them preinstalled on a SDcard before doing any more flashing.
If I am wrong, hopefully someone will correct me.
Tylor
Sent from my ASUS Transformer TF700T Infinity Pad Using Tapatalk HD
Rom: Cyanogen Nightlies 10.1 or CleanRom 3.4.4 - Depends on the mood .
Tylorw1 said:
The proper way to do this is to upgrade to the latest stock JB (10.4.4.25), unlock, and you can either fastboot the recovery or unlock it be flashing Superuser. It is not advised to downgrade,even if it seems easier, because if you do it the way I stated, everything will be latest and should not have any problems whatsoever. since you downgraded to ICS, you now have a ICS bootloader. an ICS bootloader will not boot JB, nor vice versa. so now you will need to flash a JB bootloader, which will not boot the stock ICS, so you will now need Cromi, Cyanogen,or another custom rom to get it update with JB. Make sure you have them preinstalled on a SDcard before doing any more flashing.
If I am wrong, hopefully someone will correct me.
Tylor
Sent from my ASUS Transformer TF700T Infinity Pad Using Tapatalk HD
Rom: Cyanogen Nightlies 10.1 or CleanRom 3.4.4 - Depends on the mood .
Click to expand...
Click to collapse
The writeups I had seen prior unlocking said to downgrade to .30...so I did. I am still sitting on .30 and am planning on installing CM 10.1 which I have on both the TF700 internal and an external SD card. The only problem is what I mentioned above where my device wouldn't boot into CWM and subsequently locked up for about 15 min. Should I upgrade to JB .25 prior to booting into CWM and installing CM 10.1?
lowriderdog37 said:
The writeups I had seen prior unlocking said to downgrade to .30...so I did. I am still sitting on .30 and am planning on installing CM 10.1 which I have on both the TF700 internal and an external SD card. The only problem is what I mentioned above where my device wouldn't boot into CWM and subsequently locked up for about 15 min. Should I upgrade to JB .25 prior to booting into CWM and installing CM 10.1?
Click to expand...
Click to collapse
I CM10.1 requires the JB bootloader, If you install CM on the ICS it wont boot. I dont see why the recovery is the problem. I would try updating to JB bootloader, use the zips in Cromi's second post, and then try installing Cromi. Downgrading is only recommended if you want to stay on a locked bootloader. Otherwise, you should flash the root.then install recovery, or simply fastboot it.
In order to install CM you will need to update the bootloader, then once it is updated you will not be able to boot into the ICS rom, so you will have to already have CM10.1, also dont forget google apps, so it can be flash afterwards.
IF CM is installed with the ICS boot loader it will just not boot, it will go into recovery but that is it. I dont see any probability in bricking your device. But I am only a newb, so you may wanna wait for another's input.
Tylor
Sent from my ASUS Transformer TF700T Infinity Pad Using Tapatalk HD
Rom: Cyanogen Nightlies 10.1 or CleanRom 3.4.4 - Depends on the mood .
---------- Post added at 01:26 PM ---------- Previous post was at 01:20 PM ----------
lowriderdog37 said:
The writeups I had seen prior unlocking said to downgrade to .30...so I did. I am still sitting on .30 and am planning on installing CM 10.1 which I have on both the TF700 internal and an external SD card. The only problem is what I mentioned above where my device wouldn't boot into CWM and subsequently locked up for about 15 min. Should I upgrade to JB .25 prior to booting into CWM and installing CM 10.1?
Click to expand...
Click to collapse
Or you could install the 10.4.4.25 stock, then just fastboot a recovery. I mistakenly said root with zip, you cant without custom recovery so scratch that, the only way to install custom recovery via the method I gave is fastboot. Or the way you did so, but that requires more steps and upgrades. Also greater chance of bricking. This is because of the incompatibility of the rom, boot loader, and recovery. If you have latest recovery,I would install the bootloader, then flash CM10.1 + Gapps and should be good to go.
Tylor
Sent from my ASUS Transformer TF700T Infinity Pad Using Tapatalk HD
Rom: Cyanogen Nightlies 10.1 or CleanRom 3.4.4 - Depends on the mood .
Got it working. Yes, it appears CWM is bootloader specific. I flashed the JB bootloader and was able to get into cwm and install CM10.1 I am not up and running. Thanks!
lowriderdog37 said:
Got it working. Yes, it appears CWM is bootloader specific. I flashed the JB bootloader and was able to get into cwm and install CM10.1 I am not up and running. Thanks!
Click to expand...
Click to collapse
Just remember for future reference, keep things up to date,or at least compatible with one another or you will run into trouble later.The #1 reason for tf700's bricking software wise is people do not update their bootloader as they update their recovery. Just keep things recent and you should have not a problem.
Tylor
Sent from my ASUS Transformer TF700T Infinity Pad Using Tapatalk HD
Rom: Cyanogen Nightlies 10.1 or CleanRom 3.4.4 - Depends on the mood .
Hello,
i was wondering if someone could answer some questions that i have about android and the asus tf700t.
now i already searched on google and on xda but there are so many informations and i just cant tell which one is the "best" or the right one.
My Asus is unlocked. i got that far and didnt think it would be too hard to root but i see command lines and/or 3 different kinds of software or files that i have to download first or programs like unlockroot etc.
so i was wondering if you could answer me a few questions.
1. do i need to root to put on a custom rom or is it enough that the device is unlocked?
2. what is the easiest and safest way to root?
3. what are 3 good custom roms?
i have android 4.1.1 on my asus and heard that 4.2 is out so i would like to update it but i never had an android device until now so i just want to make sure i m not destroying it after 3 months of use.
Thank you very much
Ben
Custom ROMS are pre rooted, usually, so you best bet would:
1. Update to stock 4.2.1
2. Root using Motochopper
3. Download GooManager(give root rights') from Play Store and Install TWRP by installing open script recovery.
4. Perform a factory reset via TWRP, without wiping Internal storage, or MicroSD card.
5. Install CromiX or CyanogenMod
There are other ROMS out there, but it is advised to install CromiX first because it is stock based and can be flashed over the stock ROM.
Also, make sure you know how to get into the recovery manually, and make sure you check files before flashing to make sure things downloaded properly.
Sent from my ASUS Transformer Pad TF700T using Tapatalk HD
ROM: CleanRom Xenogenesis 4.4 DeOdex
Kernel: Hundsbuah's V3.0.5 OC Kernel
Theme: Timberwolf's Blues and Jazz Theme
Thank you for the short guide....
but here is the first problem i have....
i dont know how to upgrade to 4.2.1. or if that update is available for my device yet. some pages said it is. some said its not available.
i have no idea where to get it since over the air update is not possible due to the unlock.
ben9000 said:
Thank you for the short guide....
but here is the first problem i have....
i dont know how to upgrade to 4.2.1. or if that update is available for my device yet. some pages said it is. some said its not available.
i have no idea where to get it since over the air update is not possible due to the unlock.
Click to expand...
Click to collapse
Asus pulled the JB 4.2.1 firmware off their website, probably because they realized it had too many bugs. They probably are working on a new release and I would wait for it.
In the meantime read the forums and familiarize yourself with the process of rooting, installing a custom recovery and flashing custom roms.
If you don't want to wait, search for the forums on the Motochopper tool. I believe you can also use it to gain root under 4.1, but I'm not 100% sure.
If you have root, download Goo Manager, tap the 3 dots in the upper right and choose: Install open recovery script.
This will install the TWRP 2.5.0 custom recovery.
Boot into TWRP and select 'Backup'. This will give you a nandroid backup of your current system. Copy it to a safe place.
Next, you still being on 4.1, you need to flash the JB 4.2 bootloader which is version 10.6.1.14.4. You'll find a link in post 1 of the Cromi Xenogenesis thread in the development section. The dev packaged it with TWRP 2.5. It doesn't hurt to re-install TWRP.
Also download the latest release of the Cromi-X (ODEX) ROM, currently 4.4.1, and place both zips into the root of your internal or external SD card (your choice).
Boot into recovery, choose 'Install', navigate to the 10.6.1.14.4 bootloader/TWRP zip you downloaded and swipe to flash it. After installation the tablet will reboot into your old rom - this is fine.
At this point, just to be safe, you may want to check if you have the correct bootloader installed: Boot up with Vol Down and Power button and read the tiny script. It gives you the bootloader version.
If you're 100% sure you have the correct bootloader and TWRP 2.5.0, proceed:
Boot into TWRP recovery again, select Install, select the CROMIX 4.4.1 zip and flash it.
The Aroma installer will start and give you options to choose from. Stick with most of the default options for the beginning. You can always re-flash the rom with a different set of options selected.
Enjoy!
Sent from my ASUS Transformer Pad TF700T using Tapatalk HD
Hi All,
I am looking for a complete guide (or links to various parts) to install the new CM10.1 nightlies that started on 5/19/2013.
I've been looking through XDA and I see a lot of information that's dated for the 4.2.1 and earlier, but nothing that confirms these steps work for these new nightlies.
1. Unlock BL using ASUS v8? (I am on 4.2.1)
2. Root it (how, what procedure should I follow and which files)?
3. Which BL should I install? I've been using CWM on my GS3, but a lot of these guides use TWRP. which versions
4. This guide looks dated, please confirm
http://forum.xda-developers.com/showthread.php?t=2055430
5. Any recommendations for a better ROM? Or is the CM10.1 the best for this tablet?
6. Since I have the WIFI version of this, I am assuming I dont need to worries about the baseband updates that were recently required for the CM10.1 updates? If I am wrong, please advise.
Thanks for you help in advance!
snoopspecial said:
Hi All,
I am looking for a complete guide (on links to various parts) to install the new CM10.1 nightlies that started on 5/19/2013.
I've been looking through XDA and I see a lot of information thats dated for the 4.2.1 and earlier, but nothing that confirms these steps work for these new nightlies.
1. Unlock BL using ASUS v8? (I am on 4.2.1)
2. Root it (how, what procedure should I follow and which files)?
3. Which BL should I install? I've been using CWM on my GS3, but a lot of these guides use TWRP. which versions
4. This guide looks dated, please confirm
http://forum.xda-developers.com/showthread.php?t=2055430
5. Any recommendations for a better ROM? Or is the CM10.1 the best for this tablet?
6. Since I have the WIFI version of this, I am assuming I dont need to worries about the baseband updates that were recently required for the CM10.1 updates? If I am wrong, please advise.
Thanks for you help in advance!
Click to expand...
Click to collapse
Most of your questions have already been answered multiple times. Ill do my best to summarize the answers ......
1) V8 unlocks most although there are some who arent able to unlock after having things come back from Asus from repair.
2) Unless you are stuck on a locked bootloader, skip rooting if you are planning on installing a custom rom..... why waste your time rooting something you wont be using? If you fall into this category, your option are limited but there is a way to root without TWRP or CWM.
3) Personally I have found that the 4.1 bootloader version 10.4.2.20 seems to play nicest with my tf300t. This of course means im stuck using Roms made specifically for 4.1 bootloaders. Im using twrp 2.4.4.0. Instructions on downgrading firmware are all over, but im pretty sure you must have an unlocked bootloader for this as well. Its a simple fastboot command to push the older system blob file to the device. Relatively easy.
4) Cant comment as I dont use CM
5) Im using CleanRom Inheritance and found that it not only benches higher, but runs much much faster than anything else I have tried on my tablet. I started with the latest 4.2.1 ROM and Bootloader. After trying everything out and everything lagging on my tablet, I decided to downgrade firmware. ROMS are nothing but personal preference, but, I find personally that Cromi ( for 4.1 ) along with Unter's kernel,makes my device smooth as butter. YMMV
6) Again, I cant comment as I dont use CM. Maybe someone else can chime in on this ? There are PLENTY of rom options available. Just try things out and see what you like best. Just remember to read the roms OP very carefully to make sure you have the proper bootloader installed for it. You can brick your device if you mismatch the rom and bootloaders.
Sent from my ASUS Transformer Pad TF300T using xda app-developers app
pyraxiate said:
Most of your questions have already been answered multiple times. Ill do my best to summarize the answers ......
1) V8 unlocks most although there are some who arent able to unlock after having things come back from Asus from repair.
2) Unless you are stuck on a locked bootloader, skip rooting if you are planning on installing a custom rom..... why waste your time rooting something you wont be using? If you fall into this category, your option are limited but there is a way to root without TWRP or CWM.
3) Personally I have found that the 4.1 bootloader version 10.4.2.20 seems to play nicest with my tf300t. This of course means im stuck using Roms made specifically for 4.1 bootloaders. Im using twrp 2.4.4.0. Instructions on downgrading firmware are all over, but im pretty sure you must have an unlocked bootloader for this as well. Its a simple fastboot command to push the older system blob file to the device. Relatively easy.
4) Cant comment as I dont use CM
5) Im using CleanRom Inheritance and found that it not only benches higher, but runs much much faster than anything else I have tried on my tablet. I started with the latest 4.2.1 ROM and Bootloader. After trying everything out and everything lagging on my tablet, I decided to downgrade firmware. ROMS are nothing but personal preference, but, I find personally that Cromi ( for 4.1 ) along with Unter's kernel,makes my device smooth as butter. YMMV
6) Again, I cant comment as I dont use CM. Maybe someone else can chime in on this ? There are PLENTY of rom options available. Just try things out and see what you like best. Just remember to read the roms OP very carefully to make sure you have the proper bootloader installed for it. You can brick your device if you mismatch the rom and bootloaders.
Sent from my ASUS Transformer Pad TF300T using xda app-developers app
Click to expand...
Click to collapse
First of all, thanks for the quick reply and detail!
1. I have a new one - so hopefully I should be ok. But I'll use v8
2. Great point, duh! The ROMs are already rooted!
3. I'd like to stick with the 4.2.2 bootloaders since my other devices are all running the same stuff. I haven't used TWRP before - any preference to that versus CWM?
4. no worries
5. I'll definitely keep in mind along with your bootloader suggestion should I downgrade. I've felt the lag with the ASUS Stock 4.2.1 ROM and all it's bloatware - I'm expect an immediate change right there with a clean rom.
6. yeah that is the primary reason I am asking about which bootloader to use with CM10.1's new nightlies.
snoopspecial said:
First of all, thanks for the quick reply and detail!
1. I have a new one - so hopefully I should be ok. But I'll use v8
2. Great point, duh! The ROMs are already rooted!
3. I'd like to stick with the 4.2.2 bootloaders since my other devices are all running the same stuff. I haven't used TWRP before - any preference to that versus CWM?
4. no worries
5. I'll definitely keep in mind along with your bootloader suggestion should I downgrade. I've felt the lag with the ASUS Stock 4.2.1 ROM and all it's bloatware - I'm expect an immediate change right there with a clean rom.
6. yeah that is the primary reason I am asking about which bootloader to use with CM10.1's new nightlies.
Click to expand...
Click to collapse
To be honest, the lag is still there accross all the 4.2 roms I tried, even debloated. Its not as bad but its still there. My alternate device has a beastly exynos in it so im used to a perfect smooth experience. I notice even a little bit of jitter and it drives me crazy ( hence why I downgraded to 4.1 ) .
As far as what bootloader to use for which CM rom, each will tell you which to use specifically. I saw there is a cm10.1 for 4.2 and for 4.1. Just make sure to match things.
I used to be a CWM user all the way, but twrp does trump it in features and usability, especially for the transformer series. I beleive there is only one single twrp that works properly on the new bootloader for stock based roms ( no cwm will work on it at all). It ends in .42 so make sure you flash the correct one. If not, your partitions wont be writable.
One MAJOR warning.........
Do NOT use the wipe / factory reset on ANY bootloader. You will brick your tablet!!! Permanently!!!!
You can ONLY use the wipes inside of twrp / CWM.
Sent from my SGH-T889 using xda app-developers app
dude, you are so awesome!
definitely smart to have installed TWRP - CWM through ROM Manager tried to suggest installing a TF201 recovery. From the web site it's vague but suggest a TF101 image as well.
I followed your suggestion and downloaded the 42 TWRP recovery from after having done all the SDK Tools installation and testing connectivity with FASTBOOT (from the installed SDK package, not random ones from the internet).
http://www.teamw.in/project/twrp2/97
I'm up in TWRP and running a backup of the ASUS original installation, will copy to External SD card.
previously i've formatted the internal card and then installed the ROM and GAPPS. Should I not do this?
thanks again! I'm keeping notes and will update when done.
pyraxiate said:
Most of your questions have already been answered multiple times. Ill do my best to summarize the answers ......
1) V8 unlocks most although there are some who arent able to unlock after having things come back from Asus from repair.
2) Unless you are stuck on a locked bootloader, skip rooting if you are planning on installing a custom rom..... why waste your time rooting something you wont be using? If you fall into this category, your option are limited but there is a way to root without TWRP or CWM.
3) Personally I have found that the 4.1 bootloader version 10.4.2.20 seems to play nicest with my tf300t. This of course means im stuck using Roms made specifically for 4.1 bootloaders. Im using twrp 2.4.4.0. Instructions on downgrading firmware are all over, but im pretty sure you must have an unlocked bootloader for this as well. Its a simple fastboot command to push the older system blob file to the device. Relatively easy.
4) Cant comment as I dont use CM
5) Im using CleanRom Inheritance and found that it not only benches higher, but runs much much faster than anything else I have tried on my tablet. I started with the latest 4.2.1 ROM and Bootloader. After trying everything out and everything lagging on my tablet, I decided to downgrade firmware. ROMS are nothing but personal preference, but, I find personally that Cromi ( for 4.1 ) along with Unter's kernel,makes my device smooth as butter. YMMV
6) Again, I cant comment as I dont use CM. Maybe someone else can chime in on this ? There are PLENTY of rom options available. Just try things out and see what you like best. Just remember to read the roms OP very carefully to make sure you have the proper bootloader installed for it. You can brick your device if you mismatch the rom and bootloaders.
Sent from my ASUS Transformer Pad TF300T using xda app-developers app
Click to expand...
Click to collapse
snoopspecial said:
dude, you are so awesome!
definitely smart to have installed TWRP - CWM through ROM Manager tried to suggest installing a TF201 recovery. From the web site it's vague but suggest a TF101 image as well.
I followed your suggestion and downloaded the 42 TWRP recovery from after having done all the SDK Tools installation and testing connectivity with FASTBOOT (from the installed SDK package, not random ones from the internet).
http://www.teamw.in/project/twrp2/97
I'm up in TWRP and running a backup of the ASUS original installation, will copy to External SD card.
previously i've formatted the internal card and then installed the ROM and GAPPS. Should I not do this?
thanks again! I'm keeping notes and will update when done.
Click to expand...
Click to collapse
okay - lots of options in TWRP - going the simple safe route and just following the norm:
http://teamw.in/whattowipe
snoopspecial said:
dude, you are so awesome!
definitely smart to have installed TWRP - CWM through ROM Manager tried to suggest installing a TF201 recovery. From the web site it's vague but suggest a TF101 image as well.
I followed your suggestion and downloaded the 42 TWRP recovery from after having done all the SDK Tools installation and testing connectivity with FASTBOOT (from the installed SDK package, not random ones from the internet).
http://www.teamw.in/project/twrp2/97
I'm up in TWRP and running a backup of the ASUS original installation, will copy to External SD card.
previously i've formatted the internal card and then installed the ROM and GAPPS. Should I not do this?
thanks again! I'm keeping notes and will update when done.
Click to expand...
Click to collapse
Im assuming you are flashing CM10 then? The only important thing is fully read the OP and match your bootloader to whatever one they tell you. Its generally not a suggestion, but an actual requirement.
Mines a 32gb so I keep all of my backups and rom flashes right on the internal storage. I feel its safer in case of SD corruption or an accidental wipe. It doesnt hurt to have it in 2 places though ( backup your original rom to SD card but keep everything on the internal as well ). I always flash from internal ( roms and nandroids alike ). Ive never had an issue.
Sent from my ASUS Transformer Pad TF300T using xda app-developers app
so this is what i've done so far and am stuck now it seems. probably a mismatch between the CM ROM and the BOOTLOADER.
1. Installed TWRP 2.5.0.0 - version ending with 42.
2. From the Wipe -> Advanced in TWRP, I selected SYSTEM, CACHE, DALVIK CACHE, and DATA (skipped the last two options).
3. I have the ROMs/GAPPS on my external SD card (and backup now too)
4. I installed today's nightly CM 10.1 for TF300T and the 20130301-signed (per 4.2.2 CM builds).
5. Reboot (via TWRP, Power Off)
I hit the power button to turn on and it gets stuck at the ASUS screen. Cannot boot into ROM either via the Android icon in the Bootloader menu.
snoopspecial said:
so this is what i've done so far and am stuck now it seems. probably a mismatch between the CM ROM and the BOOTLOADER.
1. Installed TWRP 2.5.0.0 - version ending with 42.
2. From the Wipe -> Advanced in TWRP, I selected SYSTEM, CACHE, DALVIK CACHE, and DATA (skipped the last two options).
3. I have the ROMs/GAPPS on my external SD card (and backup now too)
4. I installed today's nightly CM 10.1 for TF300T and the 20130301-signed (per 4.2.2 CM builds).
5. Reboot (via TWRP, Power Off)
I hit the power button to turn on and it gets stuck at the ASUS screen. Cannot boot into ROM either via the Android icon in the Bootloader menu.
Click to expand...
Click to collapse
going to give Cromi 4.2.1 a try too while I am in this bootloader:
http://forum.xda-developers.com/showthread.php?t=2204166
I have the matching ASUS bootloader and TWRP combination this the ROM needs.
As for the CM10.1 - looks like for TF300T they are still using the older JB requirements... but still researching.
snoopspecial said:
going to give Cromi 4.2.1 a try too while I am in this bootloader:
http://forum.xda-developers.com/showthread.php?t=2204166
I have the matching ASUS bootloader and TWRP combination this the ROM needs.
As for the CM10.1 - looks like for TF300T they are still using the older JB requirements... but still researching.
Click to expand...
Click to collapse
interesting - this ROM is packed with configuration options - you can really tailor your install.. very interesting - should work since it is a stock-based rom. we'll see. installing now.
snoopspecial said:
interesting - this ROM is packed with configuration options - you can really tailor your install.. very interesting - should work since it is a stock-based rom. we'll see. installing now.
Click to expand...
Click to collapse
yeah so that worked fine. the CM10.1 version must require some different combination.
taking your suggestions now and downgrading to the 4.1 bootloader. will also install the CleanInheritance rom.
by the way, thanks again for your help and suggestions!
So just for other people out there... if you want to run the TF300T downloads from get.cm (the nightlies as of now).
I've confirmed the following requirements:
1. 10.4.2.20 - TWRP 2.5.0.0 - JB
2. CM 10.1 5/25/2013 Nighty (This is a 4.2.2 ROM - requiring the JB, not 4.2 bootloader - i imagine at some point this will be updated)
3. GAPPS 20130301-signed
ah so nice!