Hi all,
I have started this thread after not being able to find any information besides specs on my Sumixe 7inch tablet running 2.1 eclair on it.
I purchased the device from Chinavision (big mistake) and havent been able to get any info out of them regarding firmware.
In the insturction manual provided it shows you how to update the device, But because it was translated into very poor english it is like reading in brail (imposible if you don't know what your looking at). I tryed to follow there procedure to update my device. But this was unsuccesfull.
I then contacted chinavision to get the manufacturs details but they cannot provide me with them.
So i need some help trying to recover a bricked tablet.
First off all where can i get drivers for FWDN for a telechips 8900 arm 11 procersor?
Second can someone dump a copy of there original firmware online for me.
Third. Does anyone know how to get into get into recovery mode on this device after new firmware was installed.
The reason why i want this info is because chinavision want me to pay for shipment back to china which i think is rediculas as it was there crap translation that caused my device to brick.
I would also like to ask the devs to make this thread sticky as there is no info on the net regarding this device that can help. And i know that someone on XDA has a solution
Thanks in advance
Gazlufc
i came across this tablet on digg, and then wanted to find out more about this tablet and looked on google..i dont know much about it but i found a page where you can get some manufacturer details
http://www.eriktronica.com/sumixe-7-inch-android-tablet-with-wifi-and-camera..html
scroll down a little
about firmware you can try to manually flash same firmware you had before bricking.. or try(if there is such a way) to go to recovery mode factory reset it.
dont you have some sort of warranty?? to send it back or go to a service or something?
i hope this is useful for you, good luck with your tablet!
pflorin said:
i came across this tablet on digg, and then wanted to find out more about this tablet and looked on google..i dont know much about it but i found a page where you can get some manufacturer details
http://www.eriktronica.com/sumixe-7-inch-android-tablet-with-wifi-and-camera..html
scroll down a little
about firmware you can try to manually flash same firmware you had before bricking.. or try(if there is such a way) to go to recovery mode factory reset it.
dont you have some sort of warranty?? to send it back or go to a service or something?
i hope this is useful for you, good luck with your tablet!
Click to expand...
Click to collapse
Hye pforlin,
Because i orderd my tablet from chinavision they want me to send it back. the cost of sending it back from the netherlands is 20% of the sale value. so not really worth it. I have tryed to do a factory reset, and tryed to get in to recovery mode but havent been succesfull.
I hope i can find someone who has had the same issue to try and get it resolved.
Thanks for your info and ill keep posting to let you know the update
Anyone doing any "development" rooting, firmware flashing, CWmods etc on iView tablet/phones?
I found someone who did actually...named: eyeoncomputers (hey there!) who made a very comprehensive and excellent Youtube tutorial seen here (I hope this is allowed), titled:
IVIEW 760TPC Advanced Improvements - Flashing Firmware, Custom Scripts & more...
http://www.youtube.com/watch?v=fATLTulwdQg
So now, at least I know it can be done on an iView....
I'm tempted to just go for it....unfortunately, a 760TPC spec is pretty much too far off from a 792 TPC model (dual sim phone capabilities + 2G/3G + GPS/A-GPS connectivities which will most likely get messed up) if I flash it...and without any firmware back-up I'd most likely brick it before I could say I have root!)
Basically...I just want the 792 TPC rooted (for backing up purposes Titanium back up needs root right?)....so has anyone done it yet? or knows how to do it? or maybe an idea on how to go about it? Anyone? :-?
detartrated said:
Anyone doing any "development" rooting, firmware flashing, CWmods etc on iView tablet/phones?
I found someone who did actually...named: eyeoncomputers (hey there!) who made a very comprehensive and excellent Youtube tutorial seen here (I hope this is allowed), titled:
IVIEW 760TPC Advanced Improvements - Flashing Firmware, Custom Scripts & more...
http://www.youtube.com/watch?v=fATLTulwdQg
So now, at least I know it can be done on an iView....
I'm tempted to just go for it....unfortunately, a 760TPC spec is pretty much too far off from a 792 TPC model (dual sim phone capabilities + 2G/3G + GPS/A-GPS connectivities which will most likely get messed up) if I flash it...and without any firmware back-up I'd most likely brick it before I could say I have root!)
Basically...I just want the 792 TPC rooted (for backing up purposes Titanium back up needs root right?)....so has anyone done it yet? or knows how to do it? or maybe an idea on how to go about it? Anyone? :-?
Click to expand...
Click to collapse
I has a Iview 754 tpc and like you Im searching for some extra info for modding these tablet, but after hrs and hrs searching on internet, it appears like noone works on these brand, these a pitty, because its a cheap and common brand (iview) between people...
zizou_cr said:
I has a Iview 754 tpc and like you Im searching for some extra info for modding these tablet, but after hrs and hrs searching on internet, it appears like noone works on these brand, these a pitty, because its a cheap and common brand (iview) between people...
Click to expand...
Click to collapse
I have one of the 760tpc 's - I gave it to my mother but I need to get in and do Something to it because it's crashing and losing her apps. (Tired of walking her through reinstalling solitaire lol) here's a thread on another forum that may help or get you closer to your answers lol
http://tabletrepublic.com/forum/ivi...60tpc-k-ployer-momo9-official-thread-883.html
Sent from my SAMSUNG-SGH-I527 using Tapatalk 4
stinkeye22 said:
I have one of the 760tpc 's - I gave it to my mother but I need to get in and do Something to it because it's crashing and losing her apps. (Tired of walking her through reinstalling solitaire lol) here's a thread on another forum that may help or get you closer to your answers lol
http://tabletrepublic.com/forum/ivi...60tpc-k-ployer-momo9-official-thread-883.html
Sent from my SAMSUNG-SGH-I527 using Tapatalk 4
Click to expand...
Click to collapse
thanks, I"ll search inside this forum for the 754TPC models.. :good:
zizou_cr said:
thanks, I"ll search inside this forum for the 754TPC models.. :good:
Click to expand...
Click to collapse
My friend have an Iview-795TPC tablet but seems like a different story for them.
One of the kids or someone changed the lock pattern and one day the owner tried to open and locked after several attempts of trials.
Now, it asks for an email account and password of the (last) user who created and accessed the tablet but even the owner's account (email & password) seems like can't open it.
I also tried the HARD RESETTING of this gadget because when they sent it to me to do the remedy or fix it back to factory settings, I cannot undo it. Even I followed all the instructions and step-by-step procedures on the YouTube video, still cannot restore it.
Is anybody successfully tried to restore back to factory setting of this IView Tablet Model 975TPC?
I appreciate it to someone help me on this situation. Link or simple tutorial-instructions can do.
Thanks in advanced.
elsuirad said:
My friend have an Iview-795TPC tablet but seems like a different story for them.
One of the kids or someone changed the lock pattern and one day the owner tried to open and locked after several attempts of trials.
Now, it asks for an email account and password of the (last) user who created and accessed the tablet but even the owner's account (email & password) seems like can't open it.
I also tried the HARD RESETTING of this gadget because when they sent it to me to do the remedy or fix it back to factory settings, I cannot undo it. Even I followed all the instructions and step-by-step procedures on the YouTube video, still cannot restore it.
Is anybody successfully tried to restore back to factory setting of this IView Tablet Model 975TPC?
I appreciate it to someone help me on this situation. Link or simple tutorial-instructions can do.
Thanks in advanced.
Click to expand...
Click to collapse
Hi,
As you says my tablet model its diferent from yours, but when I realize my investigation on the web about a custom firmware from these tablet brand, I found these info, how can help you:
http://www.wikiforu.com/2013/03/how-to-reset-unlock-iview-tablet.html
By the way, could you please tell us, how its your experiense with these tablet? Bad or good?
Thanks..
P.S.: After search and search, I dont find anyone who make custom firmwares for these brand ...
zizou_cr said:
Hi,
As you says my tablet model its diferent from yours, but when I realize my investigation on the web about a custom firmware from these tablet brand, I found these info, how can help you:
http://www.wikiforu.com/2013/03/how-to-reset-unlock-iview-tablet.html
By the way, could you please tell us, how its your experiense with these tablet? Bad or good?
Thanks..
P.S.: After search and search, I dont find anyone who make custom firmwares for these brand ...
Click to expand...
Click to collapse
Thanks for the response.
Unfortunately, I cannot tell you about this tablet because it's my friend's gadget but I found out that it's okay to use for starters and I'm an ACER Tab user (A500),
I only brought this attention because my pal couldn't fix it. :fingers-crossed:
elsuirad said:
Thanks for the response.
Unfortunately, I cannot tell you about this tablet because it's my friend's gadget but I found out that it's okay to use for starters and I'm an ACER Tab user (A500),
I only brought this attention because my pal couldn't fix it. :fingers-crossed:
Click to expand...
Click to collapse
Here is the firmware for all the iview tablets. just unzip it and install the software and it will install the firmware to the device
iviewus.com/download/firmware/
iview 797tpc
I just purchased the Iview 797 TPC with jellybean 4.1.2.
These just released mid 2013, and have been looking all over for firmware, etc.
Not much out there for these models.
I had it connected to PC and the phone icon on desktop through media espresso said HTC generic.
So possibly these are clones of HTC.
These tabs are excellent except for the sound, they are to quiet for playback and handset volume.
So my question is can developers put aside the higher end models and get some ROMs for a Iview.
I would at least like to get jellybean 4.3 or even a piece of that KitKat .......
Flash / install the firmware
xgamer224 said:
Here is the firmware for all the iview tablets. just unzip it and install the software and it will install the firmware to the device
iviewus.com/download/firmware/
Click to expand...
Click to collapse
Now that I have downloaded the firmware, how do I put on the device? I don't have Windows (or rather would like not to use it).
I did successfully installed Android 4.4 on a Transformer Prime not so long ago, so I am comfortable with adb and fastboot tools.
Does anyone know?
Hi,
I have new UG802 bricked after a flash update.
If I connect the dongle at TV I see the image of "recovery system 4.2"
If I choose to update the firmware from a file does not work. Android gives me error and I can not go on as a photo 1, 2 and 3.
I tried to load the firmware Finless 18 with a single zip file that have system.img compressed.
I have see more post in this site with a procedure for unbrick with use a reset pin but in my PBC board don't have a reset as a youtube guide http://www.youtube.com/watch?v=4dlQkaDcgSY
Can you help me please?
Thanks
I have also used the original firmware http://www.ugoos.tv/ but I have the same problem.
answer from a noob
well, why don't you uninstall it and continue to use the original one while waiting for some some solutions coming out. sorry ,I'm a noob ,it's the best I can do .
Hasoffer said:
well, why don't you uninstall it and continue to use the original one while waiting for some some solutions coming out. sorry ,I'm a noob ,it's the best I can do .
Click to expand...
Click to collapse
I would like to follow your advice but I can not update the device. Does not make me load a firmware of any kind. I would like some advice on how to make at least a firmware reload and restart it.
Hello,
I'm sure this forum probably receives way too many of these posts, but I really do need help and my friend recommended I go here.
Last night, I was trying to root my Samsung Galaxy Note GT-7000 and afterwards ended up deleting too much apps, so lost my Play store and google play services. After which I did a factory reset, but when the phone was meant to reboot, it ended up only displaying the "Unfortunately, Samsung Setup Wizard has stopped". Now I can't get past Setup and at the same time, can't complete setup as well. It won't go past that screen, and I Can get into download mode and reboot mode - but reboot mode is of no use and turning it off and on only takes me back to the after mentioned screen.
Luckily, I have a Nokia to tide me over, but as I suspect my Note may be bricked, I don't really want to have to spend around 20000 rupees buying a new phone. I presume I may need to use Odin or a similar program to install custom recovery , but I don't know the correct files I should use and what to do, so as not to cause any more damage :/
I'd really appreciate it if anyone could help me, so I can use my phone again, preferably someone who is willing to explain, considering I do admit I'm basically a noob at this and probably shouldn't have been so idiotic as to have attempted it in the first place.
Thank you in advance,
Sakshi
Hi,
Thanks for using XDA assist.
I found a helpful guide that may help you restore stock firmware on your phone:
[STOCK ROMS] N7000 All stock ROMs + install + Root guide All at 1place,Latest 4.1.*
Although the guide is a bit dated, the same procedure should still apply.
Good Luck! - gsstudios
Hello! I apologize in advance if this is the wrong thread to be asking this. I recently bought a K7 off of craigslist. When trying to factory reset it I hit the FRP and am now stuck.
Here is what I tried so far:
1. Bypass by going to settings and adding a new user. We managed to get to settings (I could not get the "dual pane" or overview to work to run the apk) yet we managed to get to settings once. Once there I could not find any "users" button to add one too.
2. Flashing the phone. Now I'm not 100% certain I know what that means. Basically overwriting everything stored in the flash memory with new data? We attempted this with the LG flash tool. I could not find the correct kdz file for this phone. We tried using one for an LGG4 (against googles advice) Yet only got an error message with that.
3. Rooting the phone: Not confident this would even bypass the FRP but figured it might help us??? Downloaded kingroot for pc. Have not tried downloading it straight on the phone although we can't get to file manager right now so... The app, even though I don't speak chinesse, I believe is telling us to turn on USB debugging. We can not seem to get back into settings again.
The info for the phone is
Model: LG-K330
IMEI: xxxxxxxx
Any help or maybe even a "Your out of league stop trying" would be wonderful!
XDA Visitor said:
Hello! I apologize in advance if this is the wrong thread to be asking this. I recently bought a K7 off of craigslist. When trying to factory reset it I hit the FRP and am now stuck.
Here is what I tried so far:
1. Bypass by going to settings and adding a new user. We managed to get to settings (I could not get the "dual pane" or overview to work to run the apk) yet we managed to get to settings once. Once there I could not find any "users" button to add one too.
2. Flashing the phone. Now I'm not 100% certain I know what that means. Basically overwriting everything stored in the flash memory with new data? We attempted this with the LG flash tool. I could not find the correct kdz file for this phone. We tried using one for an LGG4 (against googles advice) Yet only got an error message with that.
3. Rooting the phone: Not confident this would even bypass the FRP but figured it might help us??? Downloaded kingroot for pc. Have not tried downloading it straight on the phone although we can't get to file manager right now so... The app, even though I don't speak chinesse, I believe is telling us to turn on USB debugging. We can not seem to get back into settings again.
The info for the phone is
Model: LG-K330
IMEI: xxxxxxxx
Any help or maybe even a "Your out of league stop trying" would be wonderful!
Click to expand...
Click to collapse
Hi
Thank you for using xda assist
Cant seem to find a relevant thread for your device but you can create an account and post here
http://forum.xda-developers.com/android/help
Thank you.