[Q] urgent funbook pro touch not working in cusom rom - General Questions and Answers

http://forum.xda-developers.com/showthread.php?t=2104473
regarding this thread
when in step 8 I choose restore it just says "couldn't open directory." and "No files found."
but it detected it in advanced restore from internal sdcard (emmc/clockwordmod/backup)
so i restored every single thing in advanced restore and rebooted....touch still not working
and where do we extract the recovery.img
it says (http://forum.xda-developers.com/showthread.php?t=2088876&highlight=cwm+on+funbook+pro)
Extract the file to the root of your "internal sd card"....but when i flash it by doing the same and restarts it into recovery mode then it doesnt show the option for backup and restore and upon restarting it again recovery.img is gone from root of sd card so are the changes in properties that i made in data, dev, block folders and nandg file
i also flashed the sun4i_crane_M1005_P500.20120727.rar file ..it restored my tab to original position and touch was working but when i installed custom rom on it and it rebooted, it just got stuck on the logo
please help....frustrated

Related

Unroot Karbonn A9 without bricking it.

For those who want to Unroot their Karbonn A9 with less chances of without bricking
Before performing any operation make a Nandroid backup using CWM.
Download this http://karbonnklinic.com/download/Downloads/sw/A9.rar 145 MB Update file which is in zip then extract it on your computer. After extracting there will be another zip file named Update.zip.
Now put the Update.zip on your phone's sd card, please make sure you have not put it under any folder.
Now reboot your phone into recovery and then install choose the option Install zip from sd card and then choose the option Install Update.zip from sd card, when you will select it, it will find the Update.zip file automatically on your sd card and ask you to install. Just install this file, it will took 2-3 min for install.
After successful installation don't reboot the device, just go to recovery andd wipe cache partition and then under advanced select option wipe dalvik cache, if you don't perform these option then you will stuck on the Karbonn Smart start-up screen.
Hit thanks Button if you like it.

what do i do next

i recently bought a galaxy tab s2 8inch tablet (sm-t719). i want to root it
i am following:-
https://www.youtube.com/watch?v=W7JjDfeIyRI and http://forum.xda-developers.com/tab-s2/development/twrp-3-0-2-1-galaxy-tab-s22016-sm-t713-t3390627
this is what i did until now:-
1) i copied the supersu zip file to the tablet
2) i ran odin on my laptop and i installed twerp on the tablet
3) i tried to do backup of boot, system and data. it said failed and cannot mount /data
4) it failed because:-
At the moment TWRP isn't working with encryption, this means the DATA Partition and internal storage cannot be mounted.
To mount the Data partition encryption needs to be removed and the boot image patcher needs to be flashed below.
This can be done via the FORMAT DATA button under the WIPE option in TWRP.
5) i did the format data and i got stuck. i dont know what to do next
i am unable to find the supersu zip file that i copied to the tablet. also if i say reboot then the tablet is not booting up and this is because of:-
After formatting DATA the boot image patcher can be flashed with TWRP. The boot image patcher MUST be flashed before booting the device to system.
what do i do next?
should i get an external sd card, put card in my laptop and copy on it the supersu zip file and the boot image patcher, put the sd card in the tablet then install the supersu and flash the image boot patcher? is this the only way?
@cns00 your status for now??? Did you able to boot or it won't turn on ????
i can turn on but i cant boot. it said i need to flash the image boot patcher so i can boot and i didnt do that
i put tablet in download mode. can i install the UPDATE-SuperSU-v2.76-20160630161323.zip by using odin instead of doing it in twerp? if yes how?
can i flash the no-verity-no-encrypt_ashyx.zip by using odin instead of doing it in twerp? if yes how?
or do i need to get an external sd card and put both zip files on it and do it in twerp?

failed to create backup folder while backing up to external sd card

I have Lenovo a6000 and got flashed TWRP RECOVERY 2.8.6.0. I need to back up my stock ROM. When I go to TWRP>backup>select, system, data, boot> checking md5 and swiping. But result failed. It shows *cannot create backup folder* and *failed to make backup folder*. Don't know what to do further. Need help.
And today I flashed 3.0.2-0 of TWRP. Same error. Cannot unmount sdcard, and shows something * device busy* like this.
Hi !
First , try to chose the backup location on the internal storage
Second , be sure that the removable sdcard it is supported by the rom and it is recognised in settings/storage
The problem may be with the recovery itself or with the sdcard , head over the recovery thread you have downloaded for more info or use a newer version https://forum.xda-developers.com/le...ecovery-twrp-3-0-2-lenovo-a6000-plus-t3543596
Good luck !

How to install rom after full wipe and without sideload success

Hi,
I want to install the Noble Nougat Experience 4.5 so the first I did was to copy the zip file into the download folder. Then i booted into revovery (twrp 3.1) mode, wiped all but internal storage and did a format data but the zip file was lost (I think format data was one step too much?!) . Then I tried with adb sideload but I alwyas got the error "can't load xy.zip" so I tried a random zip file from desktop and this was loaded properly. Now iam stucked in recovery mode with no OS and no idea how to get the zip file to install it.
Can someone help me please?
Trolleule said:
Hi,
I want to install the Noble Nougat Experience 4.5 so the first I did was to copy the zip file into the download folder. Then i booted into revovery (twrp 3.1) mode, wiped all but internal storage and did a format data but the zip file was lost (I think format data was one step too much?!) . Then I tried with adb sideload but I alwyas got the error "can't load xy.zip" so I tried a random zip file from desktop and this was loaded properly. Now iam stucked in recovery mode with no OS and no idea how to get the zip file to install it.
Can someone help me please?
Click to expand...
Click to collapse
use OTG ?
make sure you open terminal or CMD in the ROM folder !
Trolleule said:
Hi,
I want to install the Noble Nougat Experience 4.5 so the first I did was to copy the zip file into the download folder. Then i booted into revovery (twrp 3.1) mode, wiped all but internal storage and did a format data but the zip file was lost (I think format data was one step too much?!) . Then I tried with adb sideload but I alwyas got the error "can't load xy.zip" so I tried a random zip file from desktop and this was loaded properly. Now iam stucked in recovery mode with no OS and no idea how to get the zip file to install it.
Can someone help me please?
Click to expand...
Click to collapse
Hi,
connect your s6 to your computer in TWRP go to Advanced the ADB Sideload then swipe to start sideload
After that press Cancel.
your device must appear in your computer as MTP device so, move "Noble zip" file to your device And flash it.
Regards,

How to flash rom via twrp? rom zip not appearing on sd card

Hello guys,
I am looking for help because I am lost.
I have a motorola one vision, its rom is XT1970-3_kane_reteu_RSAS31_48_36_21 according to the lenovo rescue tool
I had flashed XT1970-3_KANE_RETEU_PL_11_RSAS31.Q1-48-36-23_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml via fastboot
I later was trying to install twrp and magisk to root the phone (to later try to extract data from the userpartition after a factory reset, kind of mission impossible I guess)
I was somehow able to install twrp but later when trying to boot the system the system was simply not there anymore. I must have messed around a bit
I am able to boot in recovery mode to twrp and I need to flash a rom. I would like to reset to factory or to obtain a bootable system and here I am stuck
I have the zip file of XT1970-3_KANE_RETEU_PL_11_RSAS31.Q1-48-36-23_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip on the external SD card
Currently if I try to boot the system after the logo the phone turns off
I turn on the phone, I get to the bootlooder. I had the bootlocker unlocked. I select recovery mode and enter twrp and here I am stuck:
If I select restore and select storage sd card no file to use for the restore appears in my sd card
If I select install I see the XT1970-3_KANE_RETEU_PL_11_RSAS31.Q1-48-36-23_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
I get invalid zip file format, error installing zip file
Should I use the other zip file? should this rom have another format?
I cannot reflash via fastboot currently
Thanks in advance
May be I have solved:
I saved on the SD card:
lineage-19.1-20220618-nightly-kane-signed.zip
lineage-19.1-20220618-recovery-kane.img
Via twrp I installed the .img file, a recovery tool (the recovery tool will substitute twrp)
(I accessed if I remember well from advanced, install ramdisk or something similar. I did not know exactly what I was doing, intuition was guiding me)
Rebooting the system through the recovery tool I applied the zip file
Later I resetted to factory via the recovery tool.
Once rebooted Lineage OS started in 10m
Now I can eventually reflash the motorola original rom via fastboot

Categories

Resources