Related
this guide is for anyone having trouble unlockin bootloader.
note: unlocking bootloader voids your warranty but hey you can relock your bootloader and your phone is under warranty once again
note : after unlocking bootloader of Xperia e c1504/1505 c1504 goes into bootloop and in some cases c1505 also faces bootloop.so backup all your data.
1)- open the dialler
and enter *#*#7378423#*#* to access
the service menu. In your device, tap Service info >
Configuration > Rooting Status . If
Bootloader unlock allowed says Yes,
then you can continue unlocking your phone..
if its no then please stop and don't try the next steps.
2)- go to developer options in your phone and enable usb debugging and in security options tick on allow installation of non market apps.
3)- download http://adbdriver.com/upload/AdbDriverInstaller.exe and install adb drivers installer on pc,open it and connect your phone to pc and install the adb drivers.
4)- download flashtool http://androxyde.github.io/index.html?1350585408000 and install on pc.
5)-open flashtool folder>flash tool drivers>flash tool drivers and then select fastboot drivers and flashmode drivers and install them.
6)- download http://www.androidfilehost.com/?fid=9390169635556426292 and extract it adb_fastboot_and_other_tools.zip and place in on your desktop/any other drive.
7)- go here http://unlockbootloader.sonymobile.com/node/add/ubs-request?token=eff07a162ac0f98cb19eae2b99647ffc .
fill your details and then check your email inbox for bootloader key.
8)- Turn off your device.On your device, hold the volume up at the same time as
you connect the device to the computer
with a USB-cable. (volume up is the fastboot button)
9)- on your pc start>type cmd and open a command prompt and navigate to adb_fastboot_and_other_tools folder . if you don't know how to use a command prompt then. see this http://m.youtube.com/watch?client=mv-google&gl=IN&hl=en-GB&v=foYsmpDrYjY&fulldescription=1
10)- Enter 'fastboot.exe -i 0x0fce getvar' without the single qoutes in the command prompt and verify that you get a
response back (for example "0.3"). This
means your device is connected
properly.
11)- enter 'fastboot.exe -i 0x0fce oem unlock
0xKEY' ,without single quotes where KEY is the unlock boot
loader key you got in step 7 .. after doing this you will get reply as done on pc and your bootloader will be unlocked.
using the above instructions you can unlock other Xperia also which has bootloader unlock allowes to be yes.backup your data before unlocking.only the fastboot buttons will vary. you can get it here -
http://unlockbootloader.sonymobile.com/fastboot-buttons
steps precisely for Xperia e c1504/1505 facing bootloop after unlocking bootloader -
1)- download stock ftf file https://docs.google.com/file/d/0B_d8uWGbkaetNS13Mmk4WEhrUTA/edit?pli=1 and copy it in flashtool>firmwares.
2)open flashtool click thunder icon select flash mode and select the stock ftf.
3)- connect Xperia e as shown in step 8 but with. holding volume down button instead of volume up. you will get a green led
4)- original firmware will get flashed and initial startup will take about 5 minutes. so be patient.
steps for relocking Xperia e bootloader
1)- download https://docs.google.com/file/d/0B_d8uWGbkaetYmh2V0l5Q0dFQW8/edit?usp=sharing
2)- flash it in same way as you flashed the original firmware..
note)- after relocking bootloaDer//on a locked bootloader if you face bootloop then use Sony update engine (download from official website) to flash original firmware.
hope my thread helps.
here is the video https://www.youtube.com/watch?v=V2D6XDLXsuw
[Q] Unlocking bootloader with a Mac...
thanks for the post. ive been reading hundreds of pages here in preparation to root my phone (XPERIA E/c1504.) i know that unlocking the bootloader is step one, so your guide is pretty helpful, but i'm on a mac! does this change any part of the process?
3)- download ADBDRIVER and install adb drivers installer on pc,open it and connect your phone to pc and install the adb drivers.
4)- download flashtool ANDROXYDE and install on pc.
i know i can get androxyde for mac, but is there a mac version of the adbdriver program?
7)- go here SONYMOBILE .
fill your details and then check your email inbox for bootloader key.
if you contact sony for the bootloader key, unlock, then lock back if you have to return it to them for warranty issues, etc., won't they know since you had to get the key from them?
thanks for your help! im a definite beginner but learning a lot from this site!
The latest Flashtool (v0.9.11.0) has "BLU" menu to make Lock/Unlock bootloader more easier.
the simple step :
1. Set up Flashtool to be ready for your device.
2. Refer to the SONY link provided in OP, and get your bootloader key
3. Connect your phone to Flashtool.
4. Click the "BLU" and follow the step.
hope that work for Xperia E,.
TR26 said:
thanks for the post. ive been reading hundreds of pages here in preparation to root my phone (XPERIA E/c1504.) i know that unlocking the bootloader is step one, so your guide is pretty helpful, but i'm on a mac!
Dude,u necessarily don't have to unlock bootloader... If u need root.(just root.nothing else).
Click to expand...
Click to collapse
syed.zeshan said:
this guide is for anyone having trouble unlockin bootloader.
Note: Unlocking bootloader voids your warranty but hey you can relock your bootloader and your phone is under warranty once again
note : After unlocking bootloader of xperia e c1504/1505 c1504 goes into bootloop and in some cases c1505 also faces bootloop.so backup all your data.
1)- open the dialler
and enter *#*#7378423#*#* to access
the service menu. In your device, tap service info >
configuration > rooting status . If
bootloader unlock allowed says yes,
then you can continue unlocking your phone..
If its no then please stop and don't try the next steps.
2)- go to developer options in your phone and enable usb debugging and in security options tick on allow installation of non market apps.
3)- download http://adbdriver.com/upload/adbdriverinstaller.exe and install adb drivers installer on pc,open it and connect your phone to pc and install the adb drivers.
4)- download flashtool http://androxyde.github.io/index.html?1350585408000 and install on pc.
5)-open flashtool folder>flash tool drivers>flash tool drivers and then select fastboot drivers and flashmode drivers and install them.
6)- download http://www.androidfilehost.com/?fid=9390169635556426292 and extract it adb_fastboot_and_other_tools.zip and place in on your desktop/any other drive.
7)- go here http://unlockbootloader.sonymobile.com/node/add/ubs-request?token=eff07a162ac0f98cb19eae2b99647ffc .
Fill your details and then check your email inbox for bootloader key.
8)- turn off your device.on your device, hold the volume up at the same time as
you connect the device to the computer
with a usb-cable. (volume up is the fastboot button)
9)- on your pc start>type cmd and open a command prompt and navigate to adb_fastboot_and_other_tools folder . If you don't know how to use a command prompt then. See this http://m.youtube.com/watch?client=mv-google&gl=in&hl=en-gb&v=foysmpdryjy&fulldescription=1
10)- enter 'fastboot.exe -i 0x0fce getvar' without the single qoutes in the command prompt and verify that you get a
response back (for example "0.3"). This
means your device is connected
properly.
11)- enter 'fastboot.exe -i 0x0fce oem unlock
0xkey' ,without single quotes where key is the unlock boot
loader key you got in step 7 .. After doing this you will get reply as done on pc and your bootloader will be unlocked.
Using the above instructions you can unlock other xperia also which has bootloader unlock allowes to be yes.backup your data before unlocking.only the fastboot buttons will vary. You can get it here -
http://unlockbootloader.sonymobile.com/fastboot-buttons
steps precisely for xperia e c1504/1505 facing bootloop after unlocking bootloader -
1)- download stock ftf file https://docs.google.com/file/d/0b_d8uwgbkaetns13mmk4wehruta/edit?pli=1 and copy it in flashtool>firmwares.
2)open flashtool click thunder icon select flash mode and select the stock ftf.
3)- connect xperia e as shown in step 8 but with. Holding volume down button instead of volume up. You will get a green led
4)- original firmware will get flashed and initial startup will take about 5 minutes. So be patient.
Steps for relocking xperia e bootloader
1)- download https://docs.google.com/file/d/0b_d8uwgbkaetymh2v0l5q0dfqw8/edit?usp=sharing
2)- flash it in same way as you flashed the original firmware..
Note)- after relocking bootloader//on a locked bootloader if you face bootloop then use sony update engine (download from official website) to flash original firmware.
Hope my thread helps.
Thank you.
Click to expand...
Click to collapse
**** man....i tried unlocking and then it said finished....now in ****i* bootloop....now what to do...i'm not a pro in these...please someone help
mathewsj114 said:
**** man....i tried unlocking and then it said finished....now in ****i* bootloop....now what to do...i'm not a pro in these...please someone help
Click to expand...
Click to collapse
I have already mentioned the steps to follow if you face bootloop on Xperia e.. please read the complete post
TR26 said:
thanks for the post. ive been reading hundreds of pages here in preparation to root my phone (XPERIA E/c1504.) i know that unlocking the bootloader is step one, so your guide is pretty helpful, but i'm on a mac! does this change any part of the process?
3)- download ADBDRIVER and install adb drivers installer on pc,open it and connect your phone to pc and install the adb drivers.
4)- download flashtool ANDROXYDE and install on pc.
i know i can get androxyde for mac, but is there a mac version of the adbdriver program?
7)- go here SONYMOBILE .
fill your details and then check your email inbox for bootloader key.
if you contact sony for the bootloader key, unlock, then lock back if you have to return it to them for warranty issues, etc., won't they know since you had to get the key from them?
thanks for your help! im a definite beginner but learning a lot from this site!
Click to expand...
Click to collapse
here you go for adb for mac - http://forum.xda-developers.com/showthread.php?t=1917237
.
okay your next question is quite good. first when I unlocked my bootloader and faced bootloop. I got my phone a Sony service centre. the guy there took my phone on warranty and tried to reinstall software through sus (works only on locked bootloader). then when he was unsuccessful he told me software modified and I got my phone back
so I don't think you will have any issue with warranty.
you can get any Xperia phone's bootloader key in your inbox just by knowing its imei.
so no issues at all.
P.S : rooting can also be done on a locked Xperia e
Syed.Zeshan said:
I have already mentioned the steps to follow if you face bootloop on Xperia e.. please read the complete post
Click to expand...
Click to collapse
Are u kidding...u mean to flash with the ftf.of C1504...dude mine is C1604 dual.....
Anyway I flashed by creating ftf from pc companion
.
And all these,steps are UN necessary..I unlocked my bootloader with flashtool..
Sent from my C1604 using xda app-developers app
Can someone reupload the stock .ftf file please? the one posted here is not available anymore.
Valentin55 said:
Can someone reupload the stock .ftf file please? the one posted here is not available anymore.
Click to expand...
Click to collapse
the link is working. i have checked it right now.
Syed.Zeshan said:
I have already mentioned the steps to follow if you face bootloop on Xperia e.. please read the complete post
Click to expand...
Click to collapse
dude i tried the steps you have mentioned but according to the official website of sony after unlocking the bootloader of the 2013 devices the factory data formats and also the settings due to which during flashing the stock rom the flashtool fails and shows that device is connected without usb debugging. now you tell me what should i do.
aahanable said:
dude i tried the steps you have mentioned but according to the official website of sony after unlocking the bootloader of the 2013 devices the factory data formats and also the settings due to which during flashing the stock rom the flashtool fails and shows that device is connected without usb debugging. now you tell me what should i do.
Click to expand...
Click to collapse
Buddy check my thread.. Might find something useful
Wrote that after getting bootloop...
http://forum.xda-developers.com/showthread.php?t=2352081
Sent from my C1604 using xda app-developers app
mathewsj114 said:
Buddy check my thread.. Might find something useful
Wrote that after getting bootloop...
http://forum.xda-developers.com/showthread.php?t=2352081
Sent from my C1604 using xda app-developers app
Click to expand...
Click to collapse
i couldn't find anything useful in ur post sorry to say that but as i said after unlocking the bootloader the factory data formatted and usb debugging was disabled due to which flashtool is not able to read my phone during flashing and hence cannot flash the stock ftf file. now what should i do
aahanable said:
i couldn't find anything useful in ur post sorry to say that but as i said after unlocking the bootloader the factory data formatted and usb debugging was disabled due to which flashtool is not able to read my phone during flashing and hence cannot flash the stock ftf file. now what should i do
Click to expand...
Click to collapse
Dude to flash stock ftf you need not enable usb debugging.
Power off, click flash, connect phone in flashmode..
Have u flashed your phone before?
Sent from my C1604 using xda app-developers app
mathewsj114 said:
Dude to flash stock ftf you need not enable usb debugging.
Power off, click flash, connect phone in flashmode..
Have u flashed your phone before?
Sent from my C1604 using xda app-developers app
Click to expand...
Click to collapse
no dude this is the first time i have done it i have bought it just two months ago and now i want it to be rooted as i know what all potential my phone is having if i get full control on it i have done all these stuff with samsung devices which generally dont have bootloader. But now i am not able to do anything plz help:crying::crying:
aahanable said:
no dude this is the first time i have done it i have bought it just two months ago and now i want it to be rooted as i know what all potential my phone is having if i get full control on it i have done all these stuff with samsung devices which generally dont have bootloader. But now i am not able to do anything plz help:crying::crying:
Click to expand...
Click to collapse
Dude in that thread it is clearly explained how to flash your phone with ftf..click thunder select flashmode,select ftf,click flash, wait till it asks you to connect device,power off connect in flashmode....
If u have done these steps correctly u won't have any problems
Sent from my C1604 using xda app-developers app
Found this guide to make a Rom from ftf...might be useful
http://forum.xda-developers.com/showthread.php?t=1849867&nocache=1
Hit the thanks button..it does not cost you anything.
it's worth something for me...
sent from my Sony Xperia e dual
plz i have xperia e and im stuck on step 10 it gives me (waiting for device) what i do
Syed.Zeshan said:
this guide is for anyone having trouble unlockin bootloader.
note: unlocking bootloader voids your warranty but hey you can relock your bootloader and your phone is under warranty once again
note : after unlocking bootloader of Xperia e c1504/1505 c1504 goes into bootloop and in some cases c1505 also faces bootloop.so backup all your data.
1)- open the dialler
and enter *#*#7378423#*#* to access
the service menu. In your device, tap Service info >
Configuration > Rooting Status . If
Bootloader unlock allowed says Yes,
then you can continue unlocking your phone..
if its no then please stop and don't try the next steps.
2)- go to developer options in your phone and enable usb debugging and in security options tick on allow installation of non market apps.
3)- download http://adbdriver.com/upload/AdbDriverInstaller.exe and install adb drivers installer on pc,open it and connect your phone to pc and install the adb drivers.
4)- download flashtool http://androxyde.github.io/index.html?1350585408000 and install on pc.
5)-open flashtool folder>flash tool drivers>flash tool drivers and then select fastboot drivers and flashmode drivers and install them.
6)- download http://www.androidfilehost.com/?fid=9390169635556426292 and extract it adb_fastboot_and_other_tools.zip and place in on your desktop/any other drive.
7)- go here http://unlockbootloader.sonymobile.com/node/add/ubs-request?token=eff07a162ac0f98cb19eae2b99647ffc .
fill your details and then check your email inbox for bootloader key.
8)- Turn off your device.On your device, hold the volume up at the same time as
you connect the device to the computer
with a USB-cable. (volume up is the fastboot button)
9)- on your pc start>type cmd and open a command prompt and navigate to adb_fastboot_and_other_tools folder . if you don't know how to use a command prompt then. see this http://m.youtube.com/watch?client=mv-google&gl=IN&hl=en-GB&v=foYsmpDrYjY&fulldescription=1
10)- Enter 'fastboot.exe -i 0x0fce getvar' without the single qoutes in the command prompt and verify that you get a
response back (for example "0.3"). This
means your device is connected
properly.
11)- enter 'fastboot.exe -i 0x0fce oem unlock
0xKEY' ,without single quotes where KEY is the unlock boot
loader key you got in step 7 .. after doing this you will get reply as done on pc and your bootloader will be unlocked.
using the above instructions you can unlock other Xperia also which has bootloader unlock allowes to be yes.backup your data before unlocking.only the fastboot buttons will vary. you can get it here -
http://unlockbootloader.sonymobile.com/fastboot-buttons
steps precisely for Xperia e c1504/1505 facing bootloop after unlocking bootloader -
1)- download stock ftf file https://docs.google.com/file/d/0B_d8uWGbkaetNS13Mmk4WEhrUTA/edit?pli=1 and copy it in flashtool>firmwares.
2)open flashtool click thunder icon select flash mode and select the stock ftf.
3)- connect Xperia e as shown in step 8 but with. holding volume down button instead of volume up. you will get a green led
4)- original firmware will get flashed and initial startup will take about 5 minutes. so be patient.
steps for relocking Xperia e bootloader
1)- download https://docs.google.com/file/d/0B_d8uWGbkaetYmh2V0l5Q0dFQW8/edit?usp=sharing
2)- flash it in same way as you flashed the original firmware..
note)- after relocking bootloaDer//on a locked bootloader if you face bootloop then use Sony update engine (download from official website) to flash original firmware.
hope my thread helps.
thank you.
Click to expand...
Click to collapse
i am stuck in that bootloop + ur link is dead....reply fast
Syed.Zeshan said:
the link is working. i have checked it right now.
Click to expand...
Click to collapse
that link is no more working...plz help
---------- Post added at 03:58 AM ---------- Previous post was at 03:54 AM ----------
freekinevil10 said:
Search on google "e dual 4shared .ftf"and download it will be approx 384mb file and flash it via flashtool.
Thank me if I helped you.
Sent from my C1604 using Tapatalk
Click to expand...
Click to collapse
my phone is xperia e c1504...will this file work????
---------- Post added at 04:01 AM ---------- Previous post was at 03:58 AM ----------
i am stuck in an xperia e c1504(ss) bootloop......what am i supposed to do??????????and the link mentioned is also dead....help
My phone is not starting after rooting process it is continuously resarting and also bar color is changed shows 3 colors xperia U
ppls help
I tried to root my phone Xperia U
i tried everything for rooting my phone all are listed below :-
1. One click Root from (oneclickroot.com)
2. Framaroot with Mobogenie
3. universal Androroot 1.6.2
4. Root by Bin4ry v11 (RunMe FR)
5. via CMD fastboot
i can't root my xperia u with above types i unloked the fastbootloader. i also install new kernel.elf file through cmd fastboot
pls help anyone with rooting and again staring up my phone or restore it like new one pls help
rooting and flashing
TO REPAIR UR PHONE :
1. FIRST OF ALL DOWNLOAD FLASHTOOL AND INSTALL IT, THEN GOTO C:>FLASHTOOL>DRIVERS and then run "flashtool drivers.exe" , and check all options.
2. DOWNLOAD XPERIA U ANDROID 2.3 OR 4.0.4 FIRMWARE FROM INTERNET AND PLACE IT IN C:>FLASHTOOL>FIRMWARES BUT BEFORE THAT REMOVE ALL THE OTHERS FILES IN THAT FOLDER.
3. OPEN FLASHTOOL AND CLICK THE FLASH BUTTON.
4. TURN OFF UR PHONE FOLLOW THE ONSCREEN COMMANDS.
5. UR PHONE SHOULD NOW BE WORKING AFTER IT IS FLASHED.
TO ROOT :
1. DOWNLOAD CYDIA IMPACTOR TOOL FROM GOOGLE.
2. RUN IMPACTOR.EXE AND CONNECT UR PHONE , THEN CLICK USB>DRIVER SCAN THEN CLICK START.
3. IF U SEE SU OR SUPERUSER IN UR PHONE THEN IT IS ROOTED OR MAYBE DOWNLOAD IT GOOGLE PLAY.
4. TO MAKE SURE UR DEVICE IS ROOTED DOWNLOAD ROOT CHECKER FROM PLAY STORE.
how can i switch on the xperia its not starting up how i can use flashtool without starting my phone ?
and pls will give me the link for flashtool for xperia U and its firmware 4.0.4 it would be grateful to u pls help me before my parent knows about this
flash the stock firmware first...
for that
You must run flash tool first.
power off phone (take out battery and insert again).
connect phone and pc with usb cable while
press and hold volume down button.
the illumination bar will become green.. and
flash tool will recognize device connected as flash
mode...
then flash the firmware....
flashtool :
http://www.flashtool.net/download.php
stock firmware :
https://drive.google.com/uc?id=0Bzvi81Rg-8meQllGQU42Rmg2Y2s&export=download
video guide on how to flash firmware :http://m.youtube.com/watch?v=KmLqd-afBK4&fulldescription=1&gl=IN&hl=en-GB&guid=&client=mv-google
For rooting Xperia u :
just flash the prerooted kernel using flashtool..
kernel link :http://forum.xda-developers.com/xperia-u/u-development/kernel-transcendence-kernel-t2299748
just extract the Zip file..
search for the kernel.elf or boot.img
(if it is kernel.elf, just rename file to kernel.img)
and flash in fast boot mode...
for fastboot mode :
power off phone (take out battery and insert again).
connect phone and pc with usb cable while
press and hold volume up button.
the illumination bar will become blue.... and
flash tool will recognize device connected as fastboot mode...
press THANKS if I helped you.............
I have found a way to root our Xperia e3 D2203 with android Lollipop !
If you read this tutorial ==> I am not responsible for what you do
Requirements
An Xperia E3 D2203 with unlockable Bootloader
The original Sony USB cable
The lastest AOSP for flamingo here ==> http://uploaded.net/f/dv4mt9
The Recovery ==>http://www.mediafire.com/download/627epe7817tolaf/boot_D2203_4.4.2.img
SuperSu Beta ==> http://download.chainfire.eu/695/SuperSU/UPDATE-SuperSU-v2.45.zip
An SDCARD with SuperSU on it
The "15 seconds ADB and Fastboot installer" tool ==>https://drive.google.com/file/d/0B0MKgCbUM0itVVFWRC02Q0VBQnc/view?usp=sharing
Flashtool ==>http://www.flashtool.net/downloads.php
0 th : unlockable or not
IT WILL DESTROYE YOUR WARENTLY
To know of your device have an unlockable boot loader dial * # * # 7378423 # * # *
Go on "service info" then in "configuration".
If under Rooting status there is "Bootloader unlock allowed: Yes" , you can read the end of this tutorial
1st : Installation
For ADB and Fastboot's install, read this ==>http://forum.xda-developers.com/showthread.php?t=2588979
For Flashtool, run the installer then go to C:/Flashtool/Driver and launch the exe
In the installer tick "Flashmode Drivers" , "Fastboot driver" and "Xperia Z2 Device Driver"
(yep the E3 have the same driver as Z2, nailed it)
2nd : Unlock BL
BACKUP YOUR DATA
Then launch Flashtool, and "wait until the end of precess". After click on BLU DON'T DO WHAT FLASHTOOL SAY
Press Vol - and plug your phone on your PC, you will see your LED turn red then green
Go to Sony website and do what they say ==>http://developer.sonymobile.com/unlockbootloader/unlock-yourboot-loader/
(Your IMEI Code is in Flashtool)
Sony will give you an unlock code, type this code in flashtool and click on Unlock
Congratulation you have an unlocked bootloader !
3rd : Install AOSP
Unzip the downloaded file of fxpblog.co in a folder and Shift right clique on this folder, then "open a command window here" or something like that (i've got a french windows, in my computer it read "Ouvrir une fenêtre de commande ici")
then shut down your phone, and press Vol + and plug it, finaly tape this on CMD
fastboot flash boot boot.img
fastboot flash system system.img
fastboot flash userdata userdata.img
fastboot reboot
Congratulation you've got android 5.0.2 on your device
4th : Rooting
After AOSP finish loading, shut it down then launch flashtool and click on the flash icon, select fastboot mode and click on "select kernel to flash" then choose the Kernel we download ==>http://www.mediafire.com/download/627epe7817tolaf/boot_D2203_4.4.2.img
Then unplug your, turn it on
When you see a purple/pink led press Vol - until your phone go into CWM
With the volume key go on "install zip" and confirme with power key
then choose the second choice in menu, then find SuperSu and install it
After SuperSu install, Go back on the first menu, go in advenced and "power off"
After this shift right click on AOSP folder, open a command window here, Plug your phone pressing Vol + and type
fastboot flash boot boot.img
fastboot reboot
And Now
You've Got
AOSP 5
Rooted
On Your
XPERIA E3 D2203
Moiremoi said:
I have found a way to root our Xperia e3 D2203 with android Lollipop !
0 th : unlockable or not
IT WILL DESTROYE YOUR WARENTLY
To know of your device have an unlockable boot loader dial * # * # 7378423 # * # *
Go on "service info" then in "configuration".
If under Rooting status there is "Bootloader unlock allowed: Yes" , you can read the end of this tutorial
Click to expand...
Click to collapse
If under Rooting status is "Bootloader unlock allowed: No", which would be the solution?
mathei said:
If under Rooting status is "Bootloader unlock allowed: No", which would be the solution?
Click to expand...
Click to collapse
TRY THIS http://forum.xda-developers.com/xperia-e3/themes-apps/e1e3-xflasher-cmd-line-tool-sbl1-t3000268
vinay said:
TRY THIS http://forum.xda-developers.com/xperia-e3/themes-apps/e1e3-xflasher-cmd-line-tool-sbl1-t3000268
Click to expand...
Click to collapse
I'll try.
mathei said:
I'll try.
Click to expand...
Click to collapse
Before trying backup ta cuz if it brick you can restore from backup or brick ta mean hard brick device that only sony can fix.
This trick worked on Xperia e1 so maby work on E3 also.
Does this method works on Xperia E3 D2206/D2243??
Does this method work with Xperia E3 D2206/D2243 ?? @vinay What do you think?
I am telling this because around a half month ago, I get rooted in my phone (D2206 model) using D2203 boot img file. Thanks for all
@lexiyuri I believe you can flash lollypop aosp and use this method to root it.
I wanna tell you that D2212 root method work on d2202 cause it supports it's kernel. Now sony released 4.4.4 on d2202 and I,ve flashed d2202 FTF on my D2212 and it is working like charm.
And an FTF contains
Boot
System
Fotakernel
Userdata
And may more.
But aosp only contains userdata.img system.img boot.img and I bet it will work.
Cause in FTF we need all partition,s compatible but in aosp just 3 and if you see cycle of phone boot you only need one compatible and it is boot which is already compatible.
Sent From My Sony Xperia E3 D2212 using XDA app.
D2203 - connected in fastboot mode -
Hi, I've tried this 6 times and each time I execute command 'fastboot flash boot boot.img' - command says waiting for device and then after 30 seconds, my phone boots up as normal - nothing happens.
Is there anyone here who knows what the problem might be?
Thanks
westroger said:
D2203 - connected in fastboot mode -
Hi, I've tried this 6 times and each time I execute command 'fastboot flash boot boot.img' - command says waiting for device and then after 30 seconds, my phone boots up as normal - nothing happens.
Is there anyone here who knows what the problem might be?
Thanks
Click to expand...
Click to collapse
problem might be driver,s or usb cable.
change usb cable and install fastboot drivers then try again.
vinay said:
problem might be driver,s or usb cable.
change usb cable and install fastboot drivers then try again.
Click to expand...
Click to collapse
Hi, thanks for the quick reply, I installed the fastboot drivers ok,- Windows said drivers installed, it's in device manager. and I am using the brand new Sony cable I got withe the phone.
Is it not possible to flash the 3 image files in the folder using Flashtool?
Thanks . . . . . . .
westroger said:
Hi, thanks for the quick reply, I installed the fastboot drivers ok,- Windows said drivers installed, it's in device manager. and I am using the brand new Sony cable I got withe the phone.
Is it not possible to flash the 3 image files in the folder using Flashtool?
Thanks . . . . . . .
Click to expand...
Click to collapse
are you connecting your device in fastboot cause possible you are trying flashmode on fastboot try this
-power OFF your device
-connect usb and vol up
-you will see blue notification light.
Drivers
westroger said:
Hi, thanks for the quick reply, I installed the fastboot drivers ok,- Windows said drivers installed, it's in device manager. and I am using the brand new Sony cable I got withe the phone.
Is it not possible to flash the 3 image files in the folder using Flashtool?
Thanks . . . . . . .
Click to expand...
Click to collapse
see image below to confirm you have correct drivers.
vinay said:
see image below to confirm you have correct drivers.
Click to expand...
Click to collapse
OK, done it, can't explain why this time it worked and I have Lollipop and I'm rooted.
Thanks Vinay.
westroger said:
OK, done it, can't explain why this time it worked and I have Lollipop and I'm rooted.
Thanks Vinay.
Click to expand...
Click to collapse
After flashing the second image to get root, yes you have root, but no CWM recovery anymore . . . . . . . . .
So you can't flash the google apps zip to your phone.
@Moiremoi
a litte bit fast way, and save 1 flash:
[*]fastboot flash boot boot_D2203_4.4.2.img
[*]fastboot flash system system.img
[*]fastboot flash userdata userdata.img
reboot in recovery, install SuperSu from strorage
reboot on fastboot mode [*]fastboot flash boot boot.img
reboot
thenemis said:
@Moiremoi
a litte bit fast way, and save 1 flash:
[*]fastboot flash boot boot_D2203_4.4.2.img
[*]fastboot flash system system.img
[*]fastboot flash userdata userdata.img
reboot in recovery, install SuperSu from strorage
reboot on fastboot mode [*]fastboot flash boot boot.img
reboot
Click to expand...
Click to collapse
Yep you're right I think. I wrote this tutorial "step by step" way so I'll leave it like that for people who just need one step and not the other, but you're right ^^
I did that but when it is done it goes first but then when I press power button because then turn on again is my device only black please could you help me quickly I need my device my device model is d2203 thank you in advance
d2203yassin said:
I did that but when it is done it goes first but then when I press power button because then turn on again is my device only black please could you help me quickly I need my device my device model is d2203 thank you in advance
Click to expand...
Click to collapse
Are you sure your device say "bootloader unlock allowed : yes" ?
Camera Issues
I don't know if this tread is still active.
But ive followed the tutorial all the way through and really impresses with how straightforward it was.
However I cant see a camera app and when I install one (lets say google camera) it says "camera has stopped working!"
Any advice?
zhongbenh said:
I don't know if this tread is still active.
But ive followed the tutorial all the way through and really impresses with how straightforward it was.
However I cant see a camera app and when I install one (lets say google camera) it says "camera has stopped working!"
Any advice?
Click to expand...
Click to collapse
Camera is not working. It is broken deep inside kernel. So wait for developer,s to fix it.
Sent From My Sony Xperia E3 dual using XDA app.
MOTO All-In-one Tool
Supported Model:
1. Any Motorola device to Flash Stock ROM.
Pre-Required:
1. Windows OS
2. STOCK ROM For flashing.
3. Supersu.zip for rooting.
4. Bootloader Key to unlock bootloader.
5. Stock Recovery for flashing.
Downloads:
*In next Post
Bugs:
1. GUI hangs if you press anything during flashing. So avoid touching anything once flash button pressed.{fixed in next update}
2. You tell :cyclops:
Features:
1. Flashing stock rom on any Motorola Device (Any model).
2. Root through superuse.zip.
3. custom recovery.
4. Bootloader lock and unlock (Required bootloader key).
5. Flashing logo.bin to remove bootloader warning message.
6. sideload any zip/ROM.
7. Installing ADB & mfastboot driver.
Request:
Please don't add direct download link in your [email protected] or in your website. if you want to add in your thread then
First ask me for permission and after that mention me in your thread and instead of giving download link, direct them to this page for downloading.
Please rate this thread to 5 * so that this tool can be published on XDA Portal
XDA:DevDB Information
Moto All-In-one Tool v1.1, Tool/Utility for the Moto Z Force
Contributors
hard91
Version Information
Status: Stable
Current Stable Version: v1.0
Stable Release Date: 2016-06-12
Created 2016-06-13
Last Updated 2016-06-16
Downloads
Go to this Link:
CLICK ON ME
Screenshots
Screenshots
FAQ
FAQ Reserved
Guide
How to Section How to Install Driver
1. Click on Driver.
2. Now Click on ADB & mfastboot Drivers.
3. Now just click Next> Next> button.
4. Do not change Installation directory.
5. After installations please make sure mfastboot.exe, fastboot, adb etc Files are present in installation directory.
6. Done.
Note: Above section is very very important without it this tool will not work.
How to Phone Info
1. Please ensure you have installed ADB & mfastboot Drivers from Driver page.
2. Enable USB debugging option under settings of your Mobile.
3. If there is any Message appears on mobile screen which require authentication to connect PC then click on remember option and Press Ok.
4. Now Click on ADB Devices button. It will show connected device and its serial No.
5. Now click on Get Phone Info to get Information Regarding Phone you currently connected with.
6. Done!
How to Flash STOCK ROM (fastboot flashable) and recover from bricked moto device.
1. Click on Flasher.
2. If you are not in fastboot mode then click on AUTO Button under Reboot into Bootloader Group Box. If you are in mobile bricked stage then manually boot into bootloader.
3. Click on browse button. It will open a dialog to select STOCK fastboot Flashable ROM
4. Go to the path where your STOCK ROM is placed.
5. On selecting STOCK ROM Directory it will show its path under STOCK ROM Path Group Box.
6. If all the basic files are present in the directory then Flash button is enabled otherwise it will give error and show missing files and Disable Flash Button.
7. Select whether you want to lock bootloader or Un-lock bootloader (if bootloader is previously unlocked it will not lock it).
8. Click on Flash button.
9. See Log window.
10. When progress bar reaches to 100% it will show Flashing Done!
11. Your phone will now reboot automatically.
12. Flashing Done!
Note: First boot take 5-10 min. So don’t worry.
How to Flash Stock/Custom Recovery
1. Click on Root/ Recovery.
2. Under Flash recovery Group box click on Browse button.
3. Select your Recovery (twrp, cwm, Stock etc) from opened dialog box.
4. It will show your selected file path in Path line.
5. Click on Flash.
6. Done!
How to Flash custom ROM or Zip using Sideload
1. Click on Root/ Recovery.
2. Under side Load Group box click on Browse button.
3. Select your custom ROM or any fastboot flashable Zip file from opened dialog box.
4. It will show your selected file path in Path line.
5. Click side load.
6. Done!
How to Root any MOTO Device
1. Click on Root/ Recovery.
2. Under Root Group box click on Browse button.
3. Select supersu.zip path from opened dialog box.
4. It will show your selected file path in Path line.
5. Click on Root.
6. Your Phone will reboot into custom recovery which you flashed previously.
7. Under custom recovery click on INSTALL > SDCARD (Internal) > select superuser.zip which you selected in 3rd step.
8. Rooting Done!
NOTE: You have to flash custom recovery first in order to Root.
How to Lock Bootloader
1. Click on Root/ Recovery.
2. Under Lock/Unlock Boot-loader Group box.
3. Click on Lock Button.
4. Done!
NOTE: There is no need of bootloader unlock key while locking bootloader.
How to Unlock Bootloader
1. Click on Root/ Recovery.
2. Under Lock/Unlock Boot-loader Group box.
3. Enter 20 digit bootloader key.
4. Click on Un-Lock.
5. Done!
How to get Unlock Bootloader Key
1. Click on Root/ Recovery.
2. Click on get Moto Key button.
3. It will restart your phone into fastboot and wait for device to respond.
4. A message box will open Read it carefully.
5. Click on show info and copy that string.
6. Now Click on OK to go to MOTO website.
7. Login to the website and paste previously copied string where motorola website say.
8. And click on can I unlock my bootloader?.
9. If yes then you will get Bootloader key in your Email inbox.
10. Now paste above 20 digit bootloader key into Under Lock/Unlock Boot-loader Group box.
11. Click on unlock bootloader button.
12. Done!
NOTE: Please note that all the MOTO Models do not support unlocking bootloader like phones under AT &T and other contract phone. This tool is not created by Rajnikant or Superman. Hence this tool can only automate the adb commands that are used to get bootloader string and unlock bootloader. This tool will not do any kind of magic to unlock your contract Moto device.
How to Remove Bootloader Warning Message
1. Click on Root/ Recovery.
2. Under Flash Logo Group box click on Browse button.
3. Select logo.bin file downloaded from your mobile XDA form.
4. It will show your selected file path in Path line.
5. Click on Flash.
6. Done!
You Have to Download each and every File from your respective XDA Form
Anyone brave enough to give this a go on the z force?
so this will only work for the version i buy directly from moto correct?
ironchef3500 said:
so this will only work for the version i buy directly from moto correct?
Click to expand...
Click to collapse
On any moto device but you need flashing zips for rrooting and twrp you need to search it in your thread
hard91 said:
On any moto device but you need flashing zips for rrooting and twrp you need to search it in your thread
Click to expand...
Click to collapse
You mean with this guide we can already root our Verizon Moto Z Force? And unlock the bootloader?
It is always great to see these posts.
Has anyone tried this yet?
I'm waiting to see if there is anyone that got this to work on the verizon force droid until i go out and buy it. anyone?
Anyone brave enough to try out on a droid force you'll be doing everyone a favor
I couldn't get it to work. Bootloader is locked tight.
onodontbescurred said:
I couldn't get it to work. Bootloader is locked tight.
Click to expand...
Click to collapse
Thank you for this. I kind of figured it would be. Damn Verizon
Sent from my XT1575 using Tapatalk
I also tried - just for the hell of it - obtaining an unlock code from Motorola. As expected, I received the message that my bootloader is not authorized to be unlocked.
For what it's worth. This device passed all the tests in sunshine, but couldn't get root or temproot to actually unlock. If we could get temproot I think it may be the way in.
onodontbescurred said:
For what it's worth. This device passed all the tests in sunshine, but couldn't get root or temproot to actually unlock. If we could get temproot I think it may be the way in.
Click to expand...
Click to collapse
Well that's progress let's just try to find a way to rooy
hard91 said:
Screenshots
Click to expand...
Click to collapse
First time ever having a Moto smartphone. How do I get a bootloader key to unlock it?
Lmax579 said:
First time ever having a Moto smartphone. How do I get a bootloader key to unlock it?
Click to expand...
Click to collapse
Maybe this???
https://androidmtk.com/unlock-bootloader-on-any-motorola-device
Hi friends,
In this thread I will guide you on how to unlock bootloader and root your Panasonic P55 Max the no harakiri way.
Pre-requisites
1. Install the mobile drivers (Drivers for Windows 7 and Windows 8.1 are provided in the mobile itself. Connect your mobile to your PC as Build-in CD-ROM and install drivers.)
2. Unlock developer options (Go to Settings--> About phone--> and continuously tap on Software Version until you unlock developer options)
3. Go to developer options and enable "OEM unlocking" and "USB debugging"
Part-1: Unlock Bootloader
1. Connect your mobile to the PC and run the following command to ensure that the mobile gets recognized.
adb devices
Click to expand...
Click to collapse
[If your mobile isn't recognized, Search for "Select USB Configuration" in developer options and select it as "Audio Source"
2. Reboot to bootloader mode by running following command
adb reboot bootloader
Click to expand...
Click to collapse
3. Run the following command to unlock bootloader
fastboot oem unlock
Click to expand...
Click to collapse
4. Reboot the mobile by running following command and you should see a warning while reboting
fastboot reboot
Click to expand...
Click to collapse
Part-2: Root using Magisk
1. Install latest magisk manager (link in description)
2. Connect your mobile to the PC and reboot to bootloader mode
3. Flash magisk by running following command (link in description)
fastboot flash boot magisk.img
Click to expand...
Click to collapse
Note: I have included Patched boot image of Magisk v17.1. Alternatively you can patch the latest Magisk by using the Stock Boot Image in the download section.
Warning: Installing Magisk is breaking Google Pay and needs a workaround.
Latest Magisk Releases - here
Hit thanks if this helped you....