Database Info

[Q] Sensation cant connect to mobile data

Hey all,,,I have a tmo sensation and have opensensation currently installed....the thing doesnt want to connect to mobile data...keeps showing the H then disconnects and repeats. Just happened recently and has been working fine on official nightly builds.
been searching around and seen others with the same issue but havent seen a fix for it
apn is correct
anyone have any idea's?

Found an answer to this in another thread. Apparently its a problem with the audio routing fix in CM roms that causes data issues in some devices.
I flashed: http://d-h.st/RFY this and it data is back to normal.

Did you flash that after wipe or over the top? I just wiped and flashed and am continuing to get the flashing data. Restoring back to Sense works and is an option, but the oddest thing for me was that this issue occurred like over night, without any installation on my part.

ebrand said:
Did you flash that after wipe or over the top? I just wiped and flashed and am continuing to get the flashing data. Restoring back to Sense works and is an option, but the oddest thing for me was that this issue occurred like over night, without any installation on my part.
Click to expand...
Click to collapse
I actually flashed the superwipe.zip I had on my sd from a different rom I had installed then flashed that rom from the link and it worked great.
I think the superwipe was in the elegencia rom thread in development.

gotcha, ARHD also has the Superwipe.zip Thanks for the tip.

Mine did the same I just deleted apn and programmed it again . I have simple mobile
Sent from my HTC

htcbrazilian said:
Mine did the same I just deleted apn and programmed it again . I have simple mobile
Sent from my HTC
Click to expand...
Click to collapse
My apn was correct so I didn't think to delete and re enter
Sent from my Sensation using xda premium

RemICS v1.6 mobile data issue

I have flashed with chinmay_7d's RemICS v1.6 . Yeak it looks cool, but I am facing an issue. When I turn on mobile data usage, the phone will turn off after some time (5-6 minutes) and it is not possible to turn on the phone again . It is needed to plug in it and turn on and then only it is working. In this condition, it is showing android is upgrading. There is no problem with using internet while plugged in. Anyone know how to fix this...? I like this ROM very much and so if it if fixed, then that will be cool.

are u coming from earlier versions of RemICS? followed all the installation steps?, go back to re-flash and tell us

tavomt said:
are u coming from earlier versions of RemICS? followed all the installation steps?, go back to re-flash and tell us
Click to expand...
Click to collapse
Yes I am .Actually this issue was with 1.5.4 also. I have followed all the steps and cleared dalvik Cache and formatted cache partition. I have even done the factory reset and wiped all apps. I think the issue is because, it is reading the battery profile incorrectly or battery is actually drained when mobile data is turned on and that is triggering switch off thing.

alwinaugustin said:
Yes I am .Actually this issue was with 1.5.4 also. I have followed all the steps and cleared dalvik Cache and formatted cache partition. I have even done the factory reset and wiped all apps. I think the issue is because, it is reading the battery profile incorrectly or battery is actually drained when mobile data is turned on and that is triggering switch off thing.
Click to expand...
Click to collapse
Not sure if I'm right, but I think the practical solution to your problem would be to perform a flash from 0 up KPQ or KPU (which are the most stable to install this ROM), it may be the modem or the base ROM you used (for 3 months I have this ROM and never gave me any problems with KPQ)
Another thing, have you tried testing with Dhiru CM9 Base? to see if the same thing happens?

alwinaugustin said:
Yes I am .Actually this issue was with 1.5.4 also. I have followed all the steps and cleared dalvik Cache and formatted cache partition. I have even done the factory reset and wiped all apps. I think the issue is because, it is reading the battery profile incorrectly or battery is actually drained when mobile data is turned on and that is triggering switch off thing.
Click to expand...
Click to collapse
Have you tried to fix permissions on CWM? I got some problems with it too. After fixing and installing 1.5.4 again no problem. Now I'm on 1.6 and all is fine...

@ tavomt :
I think I can directly flash to stock rom.

Please help me
sI have tried fix permission and after that also this issue persists.
Also I have flashed with CM10 alpha from dhiru. This is also showing the same behavior. :crying:
Now flashed with RemICS JB . But the issue is still there. :crying::crying::crying:
I think I need to go back to REMICS 1.0, as there is no issue on it. But I desperately like to use this ROM. If anyone has got a fix, please post and help me.
Sometimes, when I take apps also , the phone gone off (Google Currents and Angry bird )

alwinaugustin said:
Now flashed with RemICS JB . But the issue is still there. :crying::crying::crying:
Click to expand...
Click to collapse
What is your baseband version? Mine is xle4 and have no such problem using remics(kernel bam & chaos) and rem-jb. Try using 2g only for a day, and see if the problem still persist.
Sent from my GT-I9003 using xda app-developers app

issobuddy said:
What is your baseband version? Mine is xle4 and have no such problem using remics(kernel bam & chaos) and rem-jb. Try using 2g only for a day, and see if the problem still persist.
Sent from my GT-I9003 using xda app-developers app
Click to expand...
Click to collapse
my baseband version is I9003DDKP3 . Actually i am using 2G and use 2G network is already ticked

alwinaugustin said:
sI have tried fix permission and after that also this issue persists.
Also I have flashed with CM10 alpha from dhiru. This is also showing the same behavior. :crying:
Now flashed with RemICS JB . But the issue is still there. :crying::crying::crying:
I think I need to go back to REMICS 1.0, as there is no issue on it. But I desperately like to use this ROM. If anyone has got a fix, please post and help me.
Sometimes, when I take apps also , the phone gone off (Google Currents and Angry bird )
Click to expand...
Click to collapse
The issue you are facing is exclusive to you. So i will not consider this a bug from my ROM.
I suggest you to follow correct flashing procedure. Wiping data before flashing a new ROM is a good practice.
It is possible that a third party app you are using is responsible.
Sent from my GT-I9003

Hmmm... but I have tried it also..now I think its better go back to stock . Can anyone give me the URL to download latest stock for our phone.....?
Sent from my GT-I9003 using xda app-developers app

alwinaugustin said:
Can anyone give me the URL to download latest stock for our phone.....?
Click to expand...
Click to collapse
Here?
http://forum.xda-developers.com/showthread.php?t=1133787
Sent from my GT-I9003 using xda app-developers app

Issue persists in Stock also
:crying::crying::crying:
The sad thing is that the problem persists after flashing stock ROM also. I have first flashed to XXKPE and then to XXKPU using Odin as given in the following link
http://blog.vigitalsolutions.com/2012/08/18/upgrade-samsung-galaxy-sl-i9003-to-cyanogenmod-9-cm9/
The issue is there in both the stock ROMS. Actually this issue was not present before. Now don't know what to do. I am only able to connect to internet in plugged in state.
Some times it turns off during call also .
:crying::crying::crying:

[Q] G2x with Cyanogenmod7 can't receive data (I realize this is a common problem)

Hey, so as stated in the title, I have recently flashed Cyanogenmod7. Initially, version 7.2.0 and then the nightly build released on 10/7/12. I can no longer receive mobile data. I realize this is a very common problem and have searched through multiple forum posts here and elsewhere online. I also flashed a new kernel in an attempt to fix it (not sure of the name, found here: http://forum.xda-developers.com/showthread.php?t=1073626).
Mobile data will appear (and work) for the first 10-15 seconds after startup if wifi is disabled but then vanishes afterwards. I have tried changing the mobile network settings and apn settings in a number of ways but no method ever works (most of the ones found online appear to be at least a year old so perhaps I just need more modern entries). Any help would be greatly appreciated.

viveksmother said:
Hey, so as stated in the title, I have recently flashed Cyanogenmod7. Initially, version 7.2.0 and then the nightly build released on 10/7/12. I can no longer receive mobile data. I realize this is a very common problem and have searched through multiple forum posts here and elsewhere online. I also flashed a new kernel in an attempt to fix it (not sure of the name, found here: http://forum.xda-developers.com/showthread.php?t=1073626).
Mobile data will appear (and work) for the first 10-15 seconds after startup if wifi is disabled but then vanishes afterwards. I have tried changing the mobile network settings and apn settings in a number of ways but no method ever works (most of the ones found online appear to be at least a year old so perhaps I just need more modern entries). Any help would be greatly appreciated.
Click to expand...
Click to collapse
The CM team has yet to fix this, and I doubt it ever will be fixed. It's present on all AOSP based ROMS. I guess if they set the modem to reset on bootup, it could fix it, but I have no idea how to do that.

FatalityBoyZahy said:
The CM team has yet to fix this, and I doubt it ever will be fixed. It's present on all AOSP based ROMS. I guess if they set the modem to reset on bootup, it could fix it, but I have no idea how to do that.
Click to expand...
Click to collapse
So, to get my data back should I just reflash stock?

Have you tried hard resets? Holding power and volume up until the phone reboots?

buru898 said:
Have you tried hard resets? Holding power and volume up until the phone reboots?
Click to expand...
Click to collapse
Yeah, I've tried that. Still nothing.

I am using cm7 no problem with data whatsoever you shoud try wiping cache and dalvik cache and after that fix permissions and if u wanna install a custom kernel thats what i do when i flash a rom and works fine
Sent from my LG-P999 using xda app-developers app

ted619 said:
I am using cm7 no problem with data whatsoever you shoud try wiping cache and dalvik cache and after that fix permissions and if u wanna install a custom kernel thats what i do when i flash a rom and works fine
Sent from my LG-P999 using xda app-developers app
Click to expand...
Click to collapse
I've also tried wiping the cache and dalvik cache with no effect. I have also installed a custom kernel with no effect. I am not entirely sure what you mean by fixing permissions.
Edit: searched and figured it out. Tried fixing permissions in combination with the other two options. Still no effect.

Sorry to bump an old topic but I accidentally reflashed Cyanogen (pressed wrong zip in recovery) and now it's working so if anyone else has this problem, try doing a factory reset and then reflashing old data.

[Q] Can't install any 4.2 ROM

I was hoping to try out one of the 4.2 builds tonight, but every time I try to flash one through TWRP it just says "Failed"; I've tried CM10.1 and Eclipse ROM and they both had the same result. Also tried redownloading ROMs and re-copying them to my SD card, still no change. Can anyone tell me what I'm doing wrong here? I've never had a problem flashing any ROM before.

Devilicus said:
I was hoping to try out one of the 4.2 builds tonight, but every time I try to flash one through TWRP it just says "Failed"; I've tried CM10.1 and Eclipse ROM and they both had the same result. Also tried redownloading ROMs and re-copying them to my SD card, still no change. Can anyone tell me what I'm doing wrong here? I've never had a problem flashing any ROM before.
Click to expand...
Click to collapse
What version of TWRP are you running?
If you haven't done it lately, I would suggest updating your twrp to the latest and trying again.

I'm running the newest TWRP (I think), version 2.4.1.0

Devilicus said:
I'm running the newest TWRP (I think), version 2.4.1.0
Click to expand...
Click to collapse
Weird. I am on that same version and have been flashing 4.2 roms for the last few weeks without any issues.
A few things I would try:
-Double check the md5 of the rom you are flashing
-Make sure it is a d2vzw rom
-Wipe caches, delete user data and wipe system
-Put the rom on the internal sdcard before flashing.
Other than that, I got nothing

Relentless D said:
Weird. I am on that same version and have been flashing 4.2 roms for the last few weeks without any issues.
A few things I would try:
-Double check the md5 of the rom you are flashing
-Make sure it is a d2vzw rom
-Wipe caches, delete user data and wipe system
-Put the rom on the internal sdcard before flashing.
Other than that, I got nothing
Click to expand...
Click to collapse
Damn, yeah I can't figure it out; all the ones I've tried were Verizon ones, made sure to wipe everything as usual, tried putting it on the internal SD card and the external, won't work on either one. Very frustrating. But thanks for the help anyway

Ok, I think I figured out the problem (won't be sure until I try it), but I think what happened is I edited my build.prop to the Sprint GS3 to get Google Wallet to work, forgot to change it back, and updated TWRP (which installed the Sprint version, not Verizon), and that's why the flashes are failing. So if any other people are having the same problem, that might be why. Yes I'm an idiot lol. Hopefully this fixes it

Try carbon ROM.
First to work for me.
Sent from my SCH-I535 using xda app-developers app

Devilicus said:
Ok, I think I figured out the problem (won't be sure until I try it), but I think what happened is I edited my build.prop to the Sprint GS3 to get Google Wallet to work, forgot to change it back, and updated TWRP (which installed the Sprint version, not Verizon), and that's why the flashes are failing. So if any other people are having the same problem, that might be why. Yes I'm an idiot lol. Hopefully this fixes it
Click to expand...
Click to collapse
What baseband [modem] do you have installed? ...and some more info if build prop wasn't the issue. Would also be interested if, "but I think what happened is I edited my build.prop", was the issue and you fixed it. Let us know. Goodluck

JohnAreBee said:
What baseband [modem] do you have installed? ...and some more info if build prop wasn't the issue. Would also be interested if, "but I think what happened is I edited my build.prop", was the issue and you fixed it. Let us know. Goodluck
Click to expand...
Click to collapse
Yeah it turns out that was the problem. I edited my build.prop to match the Sprint GS3, so I could download Google Wallet from the Play Store and use it. I just never bothered to change the build.prop back. And when I updated TWRP through GooManager, it assumed I had a Sprint GS3 and installed the wrong recovery. When I flashed the correct Verizon version of TWRP everything worked fine. Thanks for the suggestions everyone

Devilicus said:
Yeah it turns out that was the problem. I edited my build.prop to match the Sprint GS3, so I could download Google Wallet from the Play Store and use it. I just never bothered to change the build.prop back. And when I updated TWRP through GooManager, it assumed I had a Sprint GS3 and installed the wrong recovery. When I flashed the correct Verizon version of TWRP everything worked fine. Thanks for the suggestions everyone
Click to expand...
Click to collapse
Good call. Might be worth mentioning over in the wallet thread. It could save someone the headache you just experienced. Congrats on getting it working.
Sent from my SCH-I535 using Tapatalk 2

Tablet keeps resetting.

I was on an very old version of baked rom when i decided it was time to upgrade to the new pac rom. I havr installed 3 different builds of that and the tablet never boots. Just freezes on the animation and resets. So then i decided to try out cm11. It installed perfectly and booted fine but about 5 minutes into uaing it it freezed and reset. It has now been doing this on any rom i try. PAC, CM11, CM10.2, CMB. Unfortunatly i have been trying to fix this issues on vacataion with only my phone. I even upgraded my twrp version and tries switching to cwm. Still no luck. Btw i am doing a clean wipe everytime. Anybody have any similar issues?
Sent from my SCH-I545 using xda app-developers app

DeeeM508 said:
I was on an very old version of baked rom when i decided it was time to upgrade to the new pac rom. I havr installed 3 different builds of that and the tablet never boots. Just freezes on the animation and resets. So then i decided to try out cm11. It installed perfectly and booted fine but about 5 minutes into uaing it it freezed and reset. It has now been doing this on any rom i try. PAC, CM11, CM10.2, CMB. Unfortunatly i have been trying to fix this issues on vacataion with only my phone. I even upgraded my twrp version and tries switching to cwm. Still no luck. Btw i am doing a clean wipe everytime. Anybody have any similar issues?
Sent from my SCH-I545 using xda app-developers app
Click to expand...
Click to collapse
My guess: You are not on the required bootloader.

Thank you. How would you suggest checking weather i am on the right one? And what would the proper bootloader for this device be? Is this somthing i will be able to flash in recovery or will i need adb?
Sent from my SCH-I545 using xda app-developers app

DeeeM508 said:
Thank you. How would you suggest checking weather i am on the right one? And what would the proper bootloader for this device be? Is this somthing i will be able to flash in recovery or will i need adb?
Sent from my SCH-I545 using xda app-developers app
Click to expand...
Click to collapse
You find that information in the OP of the rom you want to install. For CM 10 I believe it has to be 10.6.1.14.x. For CM 11 I think you also need a modified recovery.
Boot into the bootloader and read the tiny script. That will tell you what you have installed.