(RESOLVED) Stuck in Roaming after CM 10.1 (Flashing) - Verizon Samsung Galaxy S III

basically my problem was, I flashed 10.1 a few days ago...lost all services of any kind except data. I got a new sim...no luck..odin'd back to stock...then dialed a *# number and was able to get roaming data and voice even though my IMEI was showing as zero. Repair the imei via a tool here however i've been stuck roaming since. I'm back on CM 10.1 and have selected those options you selected.
PRL version 15233
MEID (all zeroes)
ERI not displayed in this version, however it is showing as none in stock
IMEI repaired...not sharing this info
baseband I535VRBMF1
Kernel: 3.4.45-cyanogenmod-gaa7da4d
build [email protected] #1
6/29
CynogenMod Version 10.1 -20130630-Nightly-d2vzw

same here
i have the same problem i let you know if i figure it out
cevil203 said:
basically my problem was, I flashed 10.1 a few days ago...lost all services of any kind except data. I got a new sim...no luck..odin'd back to stock...then dialed a *# number and was able to get roaming data and voice even though my IMEI was showing as zero. Repair the imei via a tool here however i've been stuck roaming since. I'm back on CM 10.1 and have selected those options you selected.
PRL version 15233
MEID (all zeroes)
ERI not displayed in this version, however it is showing as none in stock
IMEI repaired...not sharing this info
baseband I535VRBMF1
Kernel: 3.4.45-cyanogenmod-gaa7da4d
build [email protected] #1
6/29
CynogenMod Version 10.1 -20130630-Nightly-d2vzw
Click to expand...
Click to collapse

I did everything imaginable to fix this, finally was about to give up and just use the insurance...then I noticed someone link the 'XDA Samsung Repair Utility' guide earlier with a download and instructions...it restored my eri, my meid, and my imei...and now I Have 4g, no roaming everytnhing working perfect...super pumped.

Related

[Q] No Sim Detected after ROM update

Sorry if this has been covered somewhere, but I read through a lot of posts and none of them seem to be the same thing I am seeing.
I upgraded from the RemICS 1.3.1 to the JB v2 , and now my phone no longer sees any SIM card I put into it. I have tried multiple SIM cards, none of them work. I reinstalled back to froyo, and could see my SIM card. Then I went to gingerbread, could still see it, then I installed this ROM, and the SIM card is once again unavailable.
I have tried using a few different modems, but they do not seem to be making any difference. Any ideas?
This is what I see after I install the JB v2 ROM:
Model Number SGH-i897
Android Version 4.1.1
Baseband Version unknown
Kernel Version 3.0.31-Semaphore_JB_2.0.6sc [email protected]) #55 PREEMPT Wed Aug 22 22:17:31 EEST 2012
Slim Version Unknown
Build Number Remics-JB 2.0
Under Status
Network Unknown
Signal Strength 0 dBm 99 asu
Mobile Network type Unknown:0
Service State Out of Service
Roaming Not roaming
Mobile Network State Disconnected
My phone number Unknown
IMEI SV Unknown
Can You repeat the process?
repeat process
Deluxxxe said:
Can You repeat the process?
Click to expand...
Click to collapse
Yes, I was able to repeat the process. I went back to Froyo, then upgraded to GB, then to JB. Same issue.
I also want to clarify, I cleared all cache before installing each ROM. I also tried clearing cache after installing the ROM, but it made no difference. I even went so far as to use the advanced option for formatting the different folders /boot, /system, etc., then doing the reinstall from Froyo, but that made no difference either. I stopped short of formatting the entire internal SD card since I didn't think this was the problem.
Hello mate,
it happen the same for me. I solved the problem following the instruction in this link:
http://www.androidfamily.net/2012/0...g-galaxy-s-gt-i9000-via-remics-jb-custom-rom/
Once you have installed it, you can recheck the sim lock box. It workded for me.
Good luck!
farkld2 said:
Sorry if this has been covered somewhere, but I read through a lot of posts and none of them seem to be the same thing I am seeing.
I upgraded from the RemICS 1.3.1 to the JB v2 , and now my phone no longer sees any SIM card I put into it. I have tried multiple SIM cards, none of them work. I reinstalled back to froyo, and could see my SIM card. Then I went to gingerbread, could still see it, then I installed this ROM, and the SIM card is once again unavailable.
I have tried using a few different modems, but they do not seem to be making any difference. Any ideas?
This is what I see after I install the JB v2 ROM:
Model Number SGH-i897
Android Version 4.1.1
Baseband Version unknown
Kernel Version 3.0.31-Semaphore_JB_2.0.6sc [email protected]) #55 PREEMPT Wed Aug 22 22:17:31 EEST 2012
Slim Version Unknown
Build Number Remics-JB 2.0
Under Status
Network Unknown
Signal Strength 0 dBm 99 asu
Mobile Network type Unknown:0
Service State Out of Service
Roaming Not roaming
Mobile Network State Disconnected
My phone number Unknown
IMEI SV Unknown
Click to expand...
Click to collapse
Thank you! I will give it a try adding this step to the process. I am assuming it is the same even though mine is the i897 instead of the i9000. I'll report back on my experience.
Disable SIM lock of your Galaxy S GT-I9000 by going to “Settings > Location and Security > SIM Card Lock”.
farkld2 said:
Thank you! I will give it a try adding this step to the process. I am assuming it is the same even though mine is the i897 instead of the i9000. I'll report back on my experience.
Disable SIM lock of your Galaxy S GT-I9000 by going to “Settings > Location and Security > SIM Card Lock”.
Click to expand...
Click to collapse
I went into Settings > Security > and i see Set up SIM card lock. It is already disabled.
I was able to get it to work. WOOT!
I am not sure exactly what did it, but I think this is it...
Based on the SIM lock not being set, I decided to start messing around with it and I ended up locking the SIM using a key code from the number pad. Woops, didn't really mean to do that, but I was following some instructions on how to unlock the phone completely. Well, the only problem I had from there was I couldn't get the unlock code...I rebooted my phone and did a recovery. However, even after recovery, my phone noticed that something had changed with the SIM and I was prompted for a PUK code. Fortunately, you can get this from the AT&T website. So I logged in, did the code, my phone was now unlocked. I went into the settings and looked and the SIM card was now set to locked. I unchecked the box and unlocked it. Then I did the upgrade again and it worked this time.
Thanks again for your suggestion!
I have a LG Stylo 2 an it's doing the same how can I fix this it's showing no signal an no sim

[Q] Galaxy S3 (GT-I9300) No Service on HSDPA Mode / IMEI lost After Flashing

Hello,
I am Ankit from INDIA.To cut the long story short i just flashed my Galaxy S3 to come back to official 4.1.2. (was running on leaked 4.2.2). after flashing the device i rooted it with CMW to reset flash counter and then flashed again to official 4.1.2.After Flashing the device screen appears No service & IMEI changed to 0049.....
Then i downloaded new firmware from sammobile.com.Now got everything back IMEI is correct have network but am unable to get HSDPA network.phone is working well in GSM Mode but as soon as i chooses HSDPA gets same problem of No Service.
I have tried all the things like EFS backup restore,CSC update etc...But getting network onlyon GSM Mode(Tried with 3 different Sim Cards).
Here is the information about my device
Model GT-I9300 (Internation)
Baseband Version : I9300DDEMG2
Kernal version : 3.0.31-1292854
Build Number :I9300XXEMH4
So help me asap.
Thank You.

[Q] How to Fix SMSC after trying everything on forums?

Hi All,
I just recently rooted my Samsung Galaxy S3 (I535) Last night. I'm running a Straight Talk AT&T sim card. MMS is working perfectly, Data is working perfectly (although stuck on edge with the HSPA+ block verizon likes to put on their phones), and phone calls are not a problem. I'm having a problem with sending out SMS messages. I've tried everything so far on the forums with regards to the PDU. When i hit refresh from the Phone screen the +131.... number is correct, I enter the 0791311...Number, hit update and I always get an update error every time. I've tried going through GoSMS and Chomp, with nothing working.
Here's the ROM I'm Working with:
Build Number: Illusion_d2vzw-userdebug 4.3 JLs36G
eng.AndrolinRoot.20131010.134951 test-keys
Kernel Version: 3.4.56-cyanogenmod-g77d2f5d
[email protected] #1
Andriod Version: 4.3
Baseband VersionL I535VRBMF1.
Any help would be much appreciated,
Thanks
Denarror said:
Hi All,
I just recently rooted my Samsung Galaxy S3 (I535) Last night. I'm running a Straight Talk AT&T sim card. MMS is working perfectly, Data is working perfectly (although stuck on edge with the HSPA+ block verizon likes to put on their phones), and phone calls are not a problem. I'm having a problem with sending out SMS messages. I've tried everything so far on the forums with regards to the PDU. When i hit refresh from the Phone screen the +131.... number is correct, I enter the 0791311...Number, hit update and I always get an update error every time. I've tried going through GoSMS and Chomp, with nothing working.
Here's the ROM I'm Working with:
Build Number: Illusion_d2vzw-userdebug 4.3 JLs36G
eng.AndrolinRoot.20131010.134951 test-keys
Kernel Version: 3.4.56-cyanogenmod-g77d2f5d
[email protected] #1
Andriod Version: 4.3
Baseband VersionL I535VRBMF1.
Any help would be much appreciated,
Thanks
Click to expand...
Click to collapse
And just for some additional info, my SG3 is Verizon Branded. When I go into About Phone>Status, my phone number is listed as unknown and it says Network is Verizon Wirelss, even though I clearly registered with AT&T under Mobile Network Operators

Can Not Send/Receive Calls or Send Texts

To begin, i had been on the same Hyperdrive Rom for several months before my phone died over night and when i turned it on i was able to receive text messages and send texts for several minutes before i experienced delivery failed on every text message. I tried to make a phone call, but it would constantly "dial" but never ring. When trying to call my cell number from a different phone, it would go straight to voicemail. Currently, i can receive texts but not send them and i can not call or receive calls. Also, i can use 4g and WIFI just fine. The only issues are calling and sending texts.
I searched the forums and google for a solution and discovered that my IMIE was 0 and my ERI said "None". Using QPST i was able to manually input my IMIE back into my phone so it now reads correctly as the number that is listed behind my battery but the ERI still says "None" and i am having the same issues, nothing was fixed.
I continued to search for alternative solutions and came across a "Reprovision" trick but i could not find a stock rom old enough that was compatible with the *2767*3855# trick. Apparently, it has to be VRALF2, VRLG1 or VRLG7 and the links i have found here are all to hotfile.com which is shut down.
I came across a "Samsung MEID Repair Tool" that had apparently been on these forums but was removed, i followed the instructions (i would post link but i have not made enough posts to list outside links) but I could not get that repair tool to work because the radio of the oldest ROM i flashed was too updated.
The oldest Stock ROM i was able to download through ODIN successfully was:
Android Version: 4.1.1.
Baseband Version: 1535VRBLK3
My phone status looks like this:
Network: Verizon Wireless
Service State: In Service
Roaming: Not Roaming
Mobile Network State: Disconnected
ERI Version: None
IMEI: (Correctly showing the same number as the number behind the battery)
IMEISV: 00
Can anyone direct me to a link to a stock VRALF2 VRLG1 or VRLG7 Odin ROM so i can attempt the reprovision trick or get the Repair Tool to work or suggest steps for me to take to get my phone working again?
Thank you for any and all help.
b61994 said:
Can anyone direct me to a link to a stock VRALF2 VRLG1 or VRLG7 Odin ROM so i can attempt the reprovision trick or get the Repair Tool to work or suggest steps for me to take to get my phone working again?
Thank you for any and all help.
Click to expand...
Click to collapse
Here is the F2 rom:
http://www.shipped-roms.com/downloa...ZWALF2_618049_REV09_user_low_ship.tar.md5.zip

[Q] Mobile Network Not Available after ROM Failure - Sprint Samsung Galaxy S3

I would appreciate a little help with my Sprint Samsung Galaxy Phone:
Detail:
I have been trying to load ROMs on my Phone for 2 months. I had success with rooting the phone via OneClick several months ago. Yesterday I tried for the 50th time to load to ROMs to no avail (Status 6 & 7 errors. The beta CM tool never worked for me as well Mac and Win)). I recovered back from Nandroid back up and begin to see the com.google.playservices error on a constant bases as well as no network signal. I flashed back to factory settings and completed another restore of my Nandroid backup. This cleared the goggle errors. I continue to have problems with my network reception (WiFi Works Great). I actually called Sprint and was given the MSL Code to reset the phone. When I enter the code and press OK - nothing happens - its as if the OK button is locked.
Update to PRL, Profiles, and Firmware result in an error code of 407. Samsung Software is up to date. Flashing the radio did not work. I tried all of the Samsung code settings prior to calling Sprint as well.
Details:
- Model SPH-L710
- Android Version 4.4.2
- Baseband Unknown
- Kernel Version 3.4.0-1368792
- Build KOT49H.L710PUDND8
Status:
- Mobile Network Type is Unknown
- Service state is out of service
- Mobile state is disconnected
- Phone number unknown
- MEID, IMEI, ICCID, and PRL Version - all are unknown
I would appreciate any assistance as I have researched and read all material - please.
Thanks
DeeJaykay said:
I would appreciate a little help with my Sprint Samsung Galaxy Phone:
Detail:
I have been trying to load ROMs on my Phone for 2 months. I had success with rooting the phone via OneClick several months ago. Yesterday I tried for the 50th time to load to ROMs to no avail (Status 6 & 7 errors. The beta CM tool never worked for me as well Mac and Win)). I recovered back from Nandroid back up and begin to see the com.google.playservices error on a constant bases as well as no network signal. I flashed back to factory settings and completed another restore of my Nandroid backup. This cleared the goggle errors. I continue to have problems with my network reception (WiFi Works Great). I actually called Sprint and was given the MSL Code to reset the phone. When I enter the code and press OK - nothing happens - its as if the OK button is locked.
Update to PRL, Profiles, and Firmware result in an error code of 407. Samsung Software is up to date. Flashing the radio did not work. I tried all of the Samsung code settings prior to calling Sprint as well.
Details:
- Model SPH-L710
- Android Version 4.4.2
- Baseband Unknown
- Kernel Version 3.4.0-1368792
- Build KOT49H.L710PUDND8
Status:
- Mobile Network Type is Unknown
- Service state is out of service
- Mobile state is disconnected
- Phone number unknown
- MEID, IMEI, ICCID, and PRL Version - all are unknown
I would appreciate any assistance as I have researched and read all material - please.
Thanks
Click to expand...
Click to collapse
your efs partition appears to be jacked up, that's what usually causes all of those "unknown"'s. it happens some times when flashing roms.
im guessing you didn't make an efs backup previously?
there may be a way to fix this, but sorry, other than restoring the efs data, i don't know how.

Categories

Resources