Database Info

URGENT - Cant wipe my xoom

Hi peeps. ..
Really need someone to help here. I've sold my xoom and need to delete all my info off it. I've tried to do it the the normal way of just wipe data but when it reboots into recovery mode it just says..
Entering Android Recovery Mode
Reading ODM fuse: 1
And thats it, its just stuck there.
Now I bought it second hand and was told it had been rooted and flashed with a kernel that allowed you to alter the CPU.
My question is how do I get rid of my data and get it booting into this recovey mode?
I've installed Rom Manger from the market and tried installing CWM but it just gets stuck again on the dual core screen.
Mine is a UK 3G model.
Any advice, suggestions would be most welcome. It does boot fine into android 3.01.
I need to get this posted out today, hence the wipe.
Thanks,
Steve

Get the UK img files and reflash it back to stock through fastboot.

Grab the stock images here http://forum.xda-developers.com/showthread.php?t=1049485
Extract the images and run these commands:
fastboot flash boot boot.img
fastboot flash system system.img
fastboot flash recovery recovery.img
fastboot flash userdata userdata.img
fastboot erase cache
fastboot erase userdata

[Q] A700 unable to boot into recovery after flashing cm10.1

Hi there,
thanks to this forum I was able to flash several HTC phones sucessfully, but today I got perfectly stranded.
The original android version (jelly bean) of the Acer A700 was 4.1.1.
The plan was to get root access and put on CyanogenMod cm-10.1.0-RC5-a700.zip
Here is what I did:
- unlock the booloader (fastboot oem unlock)
- getting root access using easyroot.bat
I checked root access via "rootchecker" and everything appeared to be fine.
- Installing ClockWorkMod Recovery
- Under "recovery" I selected the A700 and also flashed the touch version of CWM
I opened up CWM and selected "reboot into recovery"
The A700 did was it was told and I got the usual CWM menue and could see the
desired cm-10.1.0-RC5 on my SD card
So far I was impressed how simple everything went and carried on flashing the CM10.1.
Before I did so I made a backup of the actual ROM on my SD card, then I selected
"wipe cache" an started the flashing process from the SD card.
Everything went fine and after a short time the rotating CyanogenMod Logo appeared.
However, the logo keeps on spinning an nothing else happens any more (20+ minutes)
I powered off the device and tried it again with the same result.
I also tried to press [power] + [vol -] to boot into recovery.
Letting go the [power] button and keeping the [vol-] button pressed after the device
vibrates for the first time brings up only "bootloader version JB365b3d3 (unlock mode)"
but the second line "loading recovery kernel image" does not appear anymore
In other words pressing the keys will show no difference to a normal start procedure.
When I connect the A400 with my PC and type in "adb devices" I get its number but the comment "offline"
In short, I have no idea what I could have done wrong nor how to access the device again
Is there someone out who can help me? - Thanks a lot in advance!

Comming from stock ROM, You must do Factory Reset / Wipe ALL to boot properly CM 10.1
About ADB, you must upgrade your Android SDK/ADB tools to the latest version, ADB changed a little with Android 4.2.2
With adb working, you can launch
adb reboot recovery
It should work, then make factory reset, and try to boot

Thanks a lot for the very fats response ... to be honest I thought, questions like mine are unlikely to be answered (oh no, not another dung-head who bricked his device)
However, I downloaded the latest adb version (dated 2013-05-22) and tried it again, but without success.
I can apply [pwr] + [vol-] ... [lock] to bring it into fastboot download mode.
At least the A700 shows the following lines:
Bootloader: Version JB-652b3d3 (unlock mode)
Bootloader: Version JB-652b3d3 (unlock mode) Starting Fastboot USB download protocol
Having achies this I tried to re-flash the initilally installed but now missing CWM
fastboot flash recovery root/recovery-clockwork-touch-6.0.2.3-a700.img
sending 'recovery' (5018 KB)...
OKAY[ 1. 326s]
wriiting 'recovery' ...
OKAY[ 1.154s]
finished. total time: 2.480s
fastboot erase cache
*** Did you mean to fastboot format this partition?
erasing 'cache'...
OKAY[ 0. 406s]
finished. total time: 0.406s
fastboot reboot
rebooting ...
finished. total time: 0.016s
Having done this I expected the CWM to be again on the A700, but when I start with [pwr] + [vol-] the A700 still does not boot into recovery.
Again I get this:
Bootloader: Version JB-652b3d3 (unlock mode)
followed by the nevern ending spinning CM10.1 logo ...
Without the adb running I'm pretty hopeless ... does a factory reset change anything at this stage?

You can try
fastboot boot root/recovery-clockwork-touch-6.0.2.3-a700.img
to go in recovery
and then in CWM
wipe all/factory reset
flash CM 10.1 again
flash gapps
reboot

We are ariborne, Sir!
Ereasing all partitions and flashing CWM again did the trick
fastboot erase boot
fastboot erase cache
fastboot erase recovery
fastboot erase system
fastboot erase userdata
fastboot flash recovery recovery-clockwork-6.0.2.3-a700.img
To be honest I don't understand why could not boot into recovery before?!
However all appears to be fine again!
Thanks a lot!

same problem
Hello, i have the same problem. I tried to flash CM with CWM but I didnt factory reset so my device is stuck. And i dont know anything about Sdk and Adb, can someone please explain to me how to do it
P.S: my bootloader was already unlocked so im very new to skd bull****, i dont know anything

2 hours I'm looking for a solution and this thead save my life
thanks for advises
the way I took is by the erasing all and fastboot boot recovery.img and after I install the last CM11 by the sdcard slot
Thanks a lot I can go to sleep
:good::good:
:angel:

Everest Recovery won't stay (fastboot takes no effect)

Hi everyone,
!!!IMPORTANT!!! It seems that anything i do in fastboot takes no effect, i erased userdata + cache but when i reboot all apps and settings are the same as before the erase..although fastboot tells me everything has been done and worked and using stock recovery to wipe all data won't work neither.
i have a curious problem with my mothers Xoom 3G (Everest).
What I have done:
1. fastboot oem unlock (worked)
2. fastboot reboot-bootloader (worked)
2. fastboot flash recovery XXX.img (worked)
4. fastboot reboot (worked)
5. I have not rebootet to stock rom i have directly tapped volume down and selected andoid recovery
6. I see the Adroid Droid with the fu.....ing Triangle
I have tried 3 different Recovery Images all been flashed correctly but everytime i try to get to recovey it is the stock one.
It seems like the stock recovery gets flashed over the custom one in the second i reboot the device.
I never startet the Xoom furher than to the M logo..
I followed the wiki.cyanogenmod Guide.
I hope someone ca help me!
Greets Jonas

Help, Loop boot screen

I buy a tablet tf300t with unlocked bootloader and android version 4.0.3
with CMW 5.5.0.4 make a backup.
after this i try install cm 10.2.1. But system now have a bootloop. I think a have wrong bootloader
now i restore cmw backup, but i have now bootloop too.
Please help my, i try fastboot with 4.2 asus stockrom, but after sending i tablet show write error.
The Tab shows
Failed to process command flash:system error(0x170003)
i make only this:
fastboot -i 0x0B05 flash system blob
should try this? But after this command, tabet have nothing, At the moment, CMW und fastboot running
fastboot erase system
fastboot erase recovery
fastboot erase userdata
fastboot erase boot
fastboot erase misc
fastboot erase cache
What are now the next step for find a solution for my Bootloop after Asus Sign?
Should try with CMW install Stockrom 4.2. But i read that 4.2 and my CMW 5.5.0.4 are not compatible.
Thank for you support.

buda5767 said:
I buy a tablet tf300t with unlocked bootloader and android version 4.0.3
with CMW 5.5.0.4 make a backup.
after this i try install cm 10.2.1. But system now have a bootloop. I think a have wrong bootloader
now i restore cmw backup, but i have now bootloop too.
Please help my, i try fastboot with 4.2 asus stockrom, but after sending i tablet show write error.
i make only this:
fastboot -i 0x0B05 flash system blob
should try this? But after this command, tabet have nothing, At the moment, CMW und fastboot running
fastboot erase system
fastboot erase recovery
fastboot erase userdata
fastboot erase boot
fastboot erase misc
fastboot erase cache
What are now the next step for find a solution for my Bootloop after Asus Sign?
Thank for you support.
Click to expand...
Click to collapse
There are a few commands missing from there look in my sig and go to the tf700 nvflash link, skip the nvflash stuff and start at the
fastboot commands... Read the hole thread per the parts the are relevant to you...
Feel free to ask me any questions you have, either there or here....
Thx Josh

help, that is very difficult.
i read that, and think i must erase all before i can make fastboot systen. Are i correct?
with CMW 5.5.0.4 install Asus stockfirm isn't a good idea?
if delete recovery etc. is danger my tablet is very empty, if fastboot than not running ...

buda5767 said:
help, that is very difficult.
i read that, and think i must erase all before i can make fastboot systen. Are i correct?
with CMW 5.5.0.4 install Asus stockfirm isn't a good idea?
if delete recovery etc. is danger my tablet is very empty, if fastboot than not running ...
Click to expand...
Click to collapse
Shoot me an email here [email protected]
We can talk more there and when we find a solution to your issue, we can post our results here....

lj50036 said:
Shoot me an email here [email protected]
We can talk more there and when we find a solution to your issue, we can post our results here....
Click to expand...
Click to collapse
Ok, i send a mail

buda5767 said:
Ok, i send a mail
Click to expand...
Click to collapse
I sent one back

Solution:
fastboot erase system
fastboot erase recovery
fastboot erase userdata
fastboot erase boot
fastboot erase misc
fastboot erase cache
fastboot -i 0x0B05 flash system blob (Asus stock firmware)
If Error
fastboot -i 0x0B05 flash system blob -> Failed to process command flash:system error(0x170003)
then use other Asus stock firmware ( DE 4.0.3)
CLOSED

Problem with my A510 after an reset

Hello,
My A510 was rooted and I installed the cm-11-20150629-UNOFFICIAL-a510-a511_lvm
All was good since one year, but today I would reset my Android to have a clean install. I used the menu in Android and then, my A510 boot again and again.
I entered in the recovery mode but when I try to install a zip or delete cache, the A510 reboot !
I tried to fastboot the recovery-cwm-shreps-6.0.5.0-a510-lvm but it has not solve my problem.
Anyone can help me to solve this big problem or to diagnose ?
Thanks !

I find the good solution :
fastboot erase system -w
fastboot erase boot
fastboot update cm-11-20160109-STABLE_UNOFFICIAL-a510_a511_lvm.zip