Database Info

{OEM}[ROM][TUTORIAL] Micromax Funbook Original Livesuit Image LEAKED !!

UPDATE : just a quicknote, i just found out that this img file makes the /system partition of 503Mb instead of 251Mb as other img for MOMO9 or older tablets, So in order to have a bigger partition, one can flash this, then install anyother rom, for instance, cyanogenmod 9/10 full version instead of lite. Good luck flashing guys
___________________________________________________________________________________________________
Hey everyone,
Presenting a leaked version of ORIGINAL MICROMAX FUNBOOK livesuit image for P300 Model (from MM SC ). If you want to revert back to original rom, worry not, no need to copy that backup file & restore using CWM recovery. Some of us were even having trouble to revert back to original with cwm backups ( failed to restore /system error!). so here is it the answer to getting back to the factory state of our tablet.
Procedure:-
JUST DOWNLOAD THE 7z FILE, EXTRACT AND FLASH THE MMX_Funbook_P300.img IN THE SAME FASHION AS OTHER LIVE SUIT IMAGES. FOR TUTORIAL ON LIVESUIT & DOWNLOADING LIVESUIT REFER :-MOMO9 LIVESUIThttp://tabletrepublic.com/forum/ivi...-ployer-momo9-firmware-rom-releases-1610.html
Congratulations on getting 100% original software installed on your rom. Go & claim your warranty if you want ( tho MM suck at it to the core )
POST INSTALL NOTES
Once you have flashed this image, you will find yourself with following specifications :-
Baseband 1.2
Build Number 97F1-D1-H2-MMX.20120914
If at this point you want to get another rom installed or you have to get root, install superuser & get clockworkmod recovery the old methods does not hold any good. You have to follow this procedure to get root & install cmw recovery. THIS METHOD IS SAME AS FOR ALL ROMS WITH BASEBAND 1.2
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Getting the power of ROOT
Now the easiest way to get root is to use UnlockRoot software which works as a charm with our funbook device. Just connect usb cable, enable debugging & press unlock on the software. Then after the tab is restarted (by the software) you get root & superuser installed.
Getting CMW recovery on the tab
Once rooted we need to install ES File Explorer on our tab. Once installed, Go to settings, in root options tick the all boxes
Make sure superuser prompts, hence verifying successful installation of superuser. If not GET SUPERUSER UP & RUNNING FIRST.
Then navigate to the root folder by pressing back key. Stop where it says press back again to exit. ( in address bar the address will be / )
Next there will be a folder named Dev(/). long press on this folder & scroll down to set properties. Then click change, check all the boxes are ticked
Repeat the above steps with data folder (/), block folder (/dev/block), nandg file (/dev/block/nandg)
Finally all the complex part is behind us, to ultimately install the CMW recovery now, just use your old cmw recovery script for ICS, run it & done, it will be installed. Reboot & check pressing the volume down key + menu key & power key.
Njoy guys .... have fun & oh .. hit thanks too
DOWNLOAD
JUST DON'T FORGET TO VERIFY THE MD5 Sumcheck
58991EC458A6DC3421004202C0F7E929
PS: I am not responsible for any of the content nor do i take any credibility for providing the content! , i found this on the WWW & just sharing using a highspeed file server (MEDIAFIRE) and a simple guide all in one place. Don't blame me if this method do any harm or brick your tab. I did my best to be safe, i tested this & flashed successfully 4 times on my funbook p300 & its working for me. !!!!

Hey thanks a lot!! Will check this out once I am home..

Hey can u please upload this in some other site? the links given are no longer working

Links updated to 4shared can't find any other website for larger file size. Hit thanks if i helped :victory::laugh::good:

mechexpert said:
Links updated to 4shared can't find any other website for larger file size. Hit thanks if i helped :victory::laugh::good:
Click to expand...
Click to collapse
Hey thanks a lot for the quick response!! & sorry for the delay on my part..it worked like a charm..!! :victory::victory:

Link not working can you please re upload it... May be on dev host or make a torrent!!
Edit: it's working now
Sent from my LG-P970 using xda premium

anybody pls post link here pls ??? direct rom link...:silly:

PLS HELP A BRO IN NEED..
its not related but i thought u guys can help..i flashed a wrong zip on my fb and now when i tirn it on..it shows only white screen and then flashes white screen...i tried flashing livesiute img available at xda...but my pc wont detect my tab...im soo in middle of crisis..my 6k has gone waste...pls simeone..if can help me...i will be highly grateful and if my tabs works again..i will share poece of cake..(by recharging ur sim with some fair balance)as a token of gratitude. ...if someone living in delhi..can flash and make my tab work.,i will pay him a visit and 300 bucks...pls help me....cuz my handicapped brother uses this tab and im not financially good to purchase him another..
thank u..

devilanuj17 said:
PLS HELP A BRO IN NEED..
its not related but i thought u guys can help..i flashed a wrong zip on my fb and now when i tirn it on..it shows only white screen and then flashes white screen...i tried flashing livesiute img available at xda...but my pc wont detect my tab...im soo in middle of crisis..my 6k has gone waste...pls simeone..if can help me...i will be highly grateful and if my tabs works again..i will share poece of cake..(by recharging ur sim with some fair balance)as a token of gratitude. ...if someone living in delhi..can flash and make my tab work.,i will pay him a visit and 300 bucks...pls help me....cuz my handicapped brother uses this tab and im not financially good to purchase him another..
thank u..
Click to expand...
Click to collapse
oh really sorry for such late reply ... but have you tried installing another copy (fresh copy) of livesuit from the internet ? have you properly connected the tablet by pressing the vol - & options button simultaneously & hitting the power key 10 times ???
i have tried almost all those firmwares out there for funbook or momo9 ... i have faced this issue many times but you might not be pressing the button configuration accurately ... rest assured your tab is fine & 6k is not a waste as u might think !!! GOOD LUCK & report back if you still face problems, i'll help you step by step if needed !

funbook
will it work for p500?

rushiachrekar said:
will it work for p500?
Click to expand...
Click to collapse
i am afraid not, it *MIGHT* work on other tablets with ALLWINNER A10 processor.

Karbonn A12+ All Things Root Thread

Flipkart delivered my Karbonn A12+ three days back. The phone is a masterpiece to say the least. But looking at the development end of the phone, there is almost no dev support for the Karbonn A12+. Sensing that, I am starting this thread to spark some development for this device.
If you are unsure about buying this handset, here is a Detailed Review of Karbonn A12+. I have covered almost everything in the review, if you want to know anything else about the phone, do let me know.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Facebook Group
Join this group if you are on Facebook.
Rooting:
Thanks to rohitm1991, we now know of a easy root method for Karbonn A12+.
Download SRSRoot One Click for your Windows PC.
Install Drivers for your phone using pdanet or Universal ADB Drivers.
Connect your phone using usb cable.
Click Smart Root in SRSRoot application on your pc.
A Prompt on your phone will ask you to install an app. Confirm.
When first two exploit fail, third exploit will launch, click Boromir on your phone and you will get a congratulation mesaage.
Reboot your phone.
If it doesn't work in first try, try again, worked for me with the exact same steps being repeated in the second try.
This video will help you in rooting:
And this one in unrooting:
Clockworkmod Recovery:
I have successfully ported Clockworkmod Recovery for our Karbonn A12+ with the help of MTK Droid Tools. I have created a special zip file to help you through the process. The files in the zip are pretty self explanatory but if you need detailed instructions, refer this guide.
Stock ROM
Thanks to chukzde, here is the cwm flashable zip of the stock rom.
I have took a full backup of the stock rom through:
SP Flash Tool, MTK Droid Tool and CWM as well. Shall upload when I have free internet to waste. Others are requested to upload one if they are blessed with a good internet connection.
Here is MT6572 Scatter file for you to use while flashing any stuff using SP Flash Tool.
Please note that old versions of SP Flash Tool will throw an error like failed to initialize on this scatter file. This file works fine with the latest version of SP Flash Tool (latest according to what I could find on the internet).
Sound Mod:
Rooted A12+ (and other device) users can use Viper Sound Mod to improve the sound quality of the phone speaker or any headset you use with it. I have shared my experience of the Viper Sound Mod on the Karbonn A12+ here.
Key Combinations:
Press and hold Volume Down + Power Button to get into Factory Mode. Selecting the only option with some english in it will factory reset your Karbonn A12+
Press and hold Volume Up + Power Button to get to a menu. In this menu, use Volume Up to scroll and Volume Down to select. From this menu, you can go to Fastboot Mode, Recovery Mode or boot normally.

Can u provide dialer.apk i wrongly uninstaled that....

arungoel1989 said:
Can u provide dialer.apk i wrongly uninstaled that....
Click to expand...
Click to collapse
http://www.mediafire.com/download/1c680yjizg053xb/Phone.apk
Sent from my A12+ using XDA Premium 4 mobile app

recovery.img not working
ur recovery is not working buddy...in mut it is
rebooting to stock recovery even after flashing the
recovery with mut

Modified Stock Launcher for Karbonn A12+
- Persistent Search bar matched to look as Jellybean style
- KitKat style Folder previews/background and App Drawer icon
Steps to Install:
Before proceeding, just to be on safer side download any other Launcher from the Play Store and use that Launcher while performing the below steps.
- Download the modified Launcher2.apk
- Using any root file explorer of your choice (I personally use ES File Explorer) copy it into /system/app
- Set permissions as -rw-r--r--
Note: Don't touch the Launcher2.odex file.
Screenshots:
Old :
New :

How to change Setting After Rooting
I want to Know is it possible to change the Android Phone Setting like Karbonn A12+.
If yes how ?
I want to Add / change Setting to add RINGTONE Selection Option for TWO SIMs in the Phone.
As the Phone does not have ringtone selection Option for the two Sims. like in Karbonn A15.
Is it possible to have such.

I got this phone couple of days back. Is it having a 2MP camera on the back. In settings picture size shows max only 2MP. no options beyond that. Can you please confirm the back camera is 5mp or 2mp ?

Nice thread. now if someone can port MIUI on this then that would be a killer combination.
even i could give it a try, is there a guide for MTK devices?

CWM recovery
karbonn a12+ got root but after flashing cwm from mobile uncle tool it get into old recovery only ............help

A12+ stuck at boot
i have A12+ and have rooted it successfully:laugh: but then in hurry i have installed chainfire downloaded long ago which is not compatible with jellybean 4.2.2 and i am stuck in boot screen (the eye) , i have already tried wiping data and cache from recovery and i have not installed cwm i have stock recovery. i could have uninstalled it via adb but 4.2.2 have sideload only hence adb commands are not working adb shell returns error : closed error. now the only option i have is to flash stock rom which i have not backed up so it would be very kind of you to upload it .or i have also read that it could be achieved by installing TWRP recovery and then renaming some files and changing some values from this linkhttp://forum.xda-developers.com/showthread.php?t=2560607 , who had similar case like me .so if anyone could provide me the stock rom and preloader drivers it would be very helpful my mobile is just a week old :crying:

my phone s dead
i rooted my a12+ as per ur giude and everything was fine for two days den suddenly it stopped working it does not even boot into recovery mode . please help !!

Nice, found another similar method over at Tech Junction.
But thx for this !

stock rom
it would be very nice if some dev puts a guide to flash stock rom and a back up of the same to help anyone who bricks his device... u cant expect a replacement frm flipkart everytim u brick one

akmalazim said:
it would be very nice if some dev puts a guide to flash stock rom and a back up of the same to help anyone who bricks his device... u cant expect a replacement frm flipkart everytim u brick one
Click to expand...
Click to collapse
I have clockworkmod backup of stock Rom, about 940 mb in size but I don't have a decent enough internet connection to upload it.

can I boot into recovery mode if my a12+ got bricked..
(stucked at boot image or eye)

@suthar98.sunil, unless an Android device is hard bricked, you can boot into recovery mode. But unless you have flashed a custom recovery like clockworkmod (link in first post) or twrp and a device backup to restore, it won't be of much use.

Scrolling interrupted at borders
Whenever i'm scrolling down in any app, no matter how slowly, it goes smoothy but is always interrupted at the borders, like in calendar, at the border between two months,in play store home page, after each app tile; or in es file explorer, after each folder while in list view, the scrolling movement bumps a little at the borders and then continues again. It happens in every app but is more visible in these. can the framework files be modified in any way to solve this issue, as I've already tried the smooth scroll tweak in the framework file and am also sure the device does not lag.
Do any of you guys out there experience this issue too?

Please provide karbonn a12+ stock rom. Please

Thanks

i flashed cwm recovery, means i can boot into recovery mode if my a12+ is hard bricked or soft bricked?

[ROM] Best custom roms for Huawei Ascend G610S (G610-U00) with complete install guide

Well, as you know, G610-U00 emotion UI (Official Stock firmware) is annoying, lets try to change the overall UI completely from boring Chinese UI into popular phones' UI.
Before we go, back up everything you need (Apps, Contacts, etc...)
Your phone bootloader must be unlocked to do these processes!!!!
1.Download and install VRoot ENGLISH VERSION on PC and root Your G610-U00 first. (Skip this step if you have already rooted your phone)
2.Download and install Mobile Uncle Tools on your phone.
3.Download TWRP English recovery for G610-U00 first and put it in SD card.
4.Download Rom below that you want to install and put it in SD card.
5.Open Mobile Uncle Tools and "Allow" root Permission and choose "Recovery Update" in Mobile Uncle Tools and then
choose "ydss-g610-u00-twrp-recovery-en-v2.0".
6.Mobile Uncle Tools will show you a message "Reboot into Recovery?" Choose "Yes".
You can also go to recovery mode this way
(1)Power off your phone
(2)Press and "HOLD" volume up button and then power button until you get into RECOVERY MODE.
7.In the TWRP recovery,
(1)Choose "Wipe"
(2)Choose "Advance Wipe"
(3)Choose Dalvik Cache, Cache, Data, System
(4)Pull the Slider below from the left to the right. Now your Phone is clean and ready to install new ROM
(5)Go Back to the menu with Back Key
(6)Choose the button "Install"
(7)Choose the ROM (zip) you have downloaded
(8)Pull the Slider below from the left to the right to install the zip and wait for the installation process
(9)After Installation process choose "Reboot"
ENJOY YOUR NEW ROM!
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Note (Optional) : For better experience, when you want to download, you should use Chrome Browser to translate pages because the download pages are written in Chinese. If you don't have Chrome Browser, just see the image at the end of the post how to download from.
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Files to download
G610-U00 custom ROMS(All Roms Have Root Access)
Edit : Google drive link for those who can't access Baidu (by a request).
Google App Installer for no google app included roms(Installing using apk, Need root access)
DEFAULT LANGUAGE IS CHINESE, AFTER BOOT UP, GO TO SETTING>LANGUAGE AND INPUT>LANGUAGE>CHANGE TO ENGLISH.
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
In any case, if you want to go back to official stock firmware,
(1) Download and flash it in TWRP RECOVERY (I'm not sure it would work in CWM but has 70% success rate )
(Without flashing this stock recovery in TWRP, you won't able to flash Official Firmware).
(2)Download extract the downloaded zip and copy the "dload" folder to SD card.
(3)Power off the phone and Press and Hold "Volume Up + Volume Down and Power Button" until you see the install processing cmd lines on your phone. Wait for the process and the phone will reboot automatically after update finish.
Now you are on the official stock firmware.
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Notice : YOUR PHONE MIGHT TAKE 10 TO 15 MINUTES TO FINISH BOOT AFTER "FLASHING (INSTALLING) NEW CUSTOM ROM" OR "INSTALLING OFFICIAL STOCK FIRMWARE". IF IT WOULD TAKE LONG MORE THAN 15 MINUTES, JUST PULL THE BATTERY AND BOOT AGAIN. THIS COULD SOLVE THE PROBLEM OF TAKING LONG TO BOOT.
***IMPORTANCE*** : FROM PHONE SETTINGS, NEVER DO "FACTORY DATA RESET" OR NEVER "UNMOUNT" "INTERNAL SD CARD OR INTERNAL STORAGE" WHILE YOU ARE ON "CUSTOM ROMS". IT WILL LEAD TO BOOTLOOP. IF YOU WANT TO DO FACTORY DATA REST GO TO TWRP RECOVERY AND CHOOSE WIPE, PULL SLIDER TO DO FACTORY RESET. IF YOU EXPERIENCE THIS PROBLEM, SEE ABOVE METHOD "GOING BACK TO STOCK FIRMWARE" AND INSTALL CUSTOM ROM PROCESS AGAIN.
I am not responsible for any damage to your phone caused by following this method. I have tested this method and it is working smoothly for me. Be sure to do precisely as my instructions and I am pretty sure this will work 100%. Good Day to you.
Post below to ask any question.
Credits to
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
S4 ROM
XPERIA C ROM
AOSP ROM
MIUI ROM

Post below if you want to know about some mods for these roms,
like removing "3G" signal prefix,
hiding second No SIM slot,
using themes on AOSP roms,
S3/S4 icons, S3/S4 or LG lock screens with S4 and Xperia Launchers
Xperia Music Players with Acid Audio Engine version working on these roms
more features I have collected and tested for these roms...
G610S is cheap and has resonable specs, so I decided to show the ways I have tested,
I don't mean I know everything.
Brands, Mods and Roms are properties of their respective authors/companies.
I am sharing the working way I have tested many times on these roms.
Thanks for reading. Good day to you!
Click "Thanks" button if I made some help for you.

hi
are all these roms compatible with g610-u20? thanks!

geloko said:
are all these roms compatible with g610-u20? thanks!
Click to expand...
Click to collapse
I am sorry these are only for G610-u00.

Feel free to share something about your experience installing these custom ROMS. I want to hear your feedback, my dears. ♥
Sent from my G610-U00 using xda app-developers app

I never went to recovery mode after clicking yes on mobile uncle tools and now my mobile is stuck in bootloop... Could you please help me find a way out????
My mobile is G610-U20.. that's where I made a mistake....

thesumanthapa said:
I never went to recovery mode after clicking yes on mobile uncle tools and now my mobile is stuck in bootloop... Could you please help me find a way out????
My mobile is G610-U20.. that's where I made a mistake....
Click to expand...
Click to collapse
OMG!!!
These custom roms are only for G610-U00.
You should read thoroughly before you do.
Try reflashing official firmware as my instruction.
Dont' download the firmware I provided.
This is only for G610-U00.
Download official firmware from Huawei website for G610-U20.

[MyPhone MY27] Development & Support

First of all, I would like to thank a friend of mine from the Philippines for giving me the device.
Thank you @shinjitakashima
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
SPECS:
CPU: 1.3GHz Quad Core Processor
Chipset: SC7731
RAM: 1GB RAM
Storage: 8GB ROM
Display: 5-inch FWVGA IPS Display
Camera: 8MP Rear / 5MP Front
OS: Android Lollipop 5.1
Expandable Up to 32GB via MicroSD
Other Feats:Accelerometer, Dual SIM (Regular + Micro), 3G, 2G EDGE and GPRS Networks, Wi-Fi and Wi-Fi Hotspot, 3.5mm Audio Jack, Bluetooth 4.0, A-GPS, FM Radio, MicroUSB 2.0
Sensorsroximity Sensor, Ambient Light Sensor
Battery:2,000mAh Li-ion Battery
NOTE: Use Ctrl+F to find tutorials easily. ​
HOW TO ROOT[Kingroot Method]​
In this method, you will use Kingroot to root your phone. The downside of this is you will have Kinguser as your root permission manager instead of SuperSU. But you can change to it later on. This is the easiest way to obtain root but changing to SuperSU from Kinguser might be difficult depending on your MY27's version.
Steps:
- Download latest Kingroot.apk from
http://king.myapp.com/myapp/kdown/img/NewKingrootV4.93_C146_B270_en_release_2016_06_06_105203.apk
- You will need a Wi-Fi connection with a stable Internet connection.
- Go to Settings/Security, and enable "Unknown Sources".
- Install the Kingroot.apk you downloaded earlier, and open/run it.
- Then click on "Try it".
- Then tap on the button which says "Get Now" which is located below the android icon.
-Wait for it to do it's job.
- Now your rooted! :victory: You can verify it by installing Root Checker from PlayStore.
HOW TO ROOT&REFLASH FIRMWARE[ResearchDownload]
In this method, you will reflash a pre-rooted stock rom/firmware using Spreadtrum's flashing tool. It's root permission manager is KingUser, and take note that this will ERASE ALL OF YOUR DATA IN YOUR PHONE.
Requirements:
- Spreadtrum Drivers
https://mega.nz/#!joVATDzL!8wtoc6EZxyIUmNsdeElZa-FTYFYTwU02-6Smtumm2yg
- MY27-PRE-ROOTED-FIRMWARE
https://mega.nz/#!O5cxjDxA!4VLWZ0np1-gv4KQFXF6WrYLf8i15GWRdR8SY0yM7iPo
Steps:
- Unpack the two files you downloaded earlier.
- Install the drivers first. Reboot may be necessary.
- After that, go to the folder where you unpacked the pre-rooted firmware.
- Go and find the ResearchDownload.exe and execute it.
- Click on the icon with two gears on it. **Second one from the left.
- Check if FDL1, FDL2, System and Userdata are checked/ticked. **Bootlogo is optional. Check it if you want to bring back the Philippine's map logo when the phone starts up.
- Now pull the battery from your phone.
- Reinsert the battery but DON'T power it on.
- Click on the icon with play in it **Third from the left.
- Ready your USB cable and press and press vol up+vol down of your phone then immediately insert/connect the USB cable.
- Flashing should start soon. You can release the volume keys as soon as the flashing starts.
- Wait for it to display "Passed" in it, then remove the cable.
- Remove the battery, reinsert it and power your phone on. It may take 5-25minutes on first boot so do not freak out.
- And there you go, you just unbricked/rooted your phone. :fingers-crossed::good:
​

Recoveries:
- MIUI Recovery **This is for v13!
https://mega.nz/#!bkdGXLrR!tkgWa_XfCfPSvQjoE0zB-ZryhPnqXxm4iZdLRTPXBhM
- TWRP **Touch is not working.. Somehow I manged to get adb on it but can't obtain permission. Need help on this
https://mega.nz/#!aocGFBxS!kA8_zHDCjovAy5NFk9Scm9S-5u_Yk5Zrukt09cSxXa0
Custom ROMs:
- None at the moment....
Mini-ROM/Patch
- MY27 Stock ROM Deodex Patch+Minimal G-Apps.
Steps:
- Go to MIUI recovery and do a factory reset.
- After that, flash the mini-rom/patch.
- Wait for it then reboot.
Link: https://mega.nz/#!Wtc10bRJ!Shv4crb3OqQ_QVe0VSvGelwuvSU_vliKT5GYcPMHoFE
NOTE: Please leave a feedback. It helps other users. :angel:
P.S : If there is already a custom ROM for this device, leave a reply below containing the link and dev/maker of the ROM. :good:
Tweaks:
- None at the moment. But I already managed to get init.d working on it and some init.d and build.prop is alread loaded. I'll be uploading it soon.
P.S : If there is already a tweak for this device, leave a reply below containing the link and dev/maker of the ROM. :good:

GUIDES: Developers & Experienced Users Only
WARNING! PROCEED WITH CAUTION! :fingers-crossed:
How to flash recovery
REQUIREMENTS:
- Flashify.apk
- Root permissions.
- A recovery.img **See second post.
STEPS:
- Download and install Flashify from Playstore. And also, download a recovery at the second post.
- Open Flashify and give it root permissions.
- Now, you might want to back up your stock recovery first. To do so, tap the "BACKUP/RESTORE" tab and then tap on "Backup current recovery".
- Otherwise, proceed to flashing the recovery by tapping on the "FLASH" tab and then tap on "Recovery Image".
- Navigate to the recovery you downloaded at the second post which comes in a ".img" format. **Be sure it is for your version!
- Then confirm that you want to flash the recovery. After it had flashed the said recovery, it will ask you to reboot or flash more.
- You might want to reboot for now to take a look at your new recovery :good:
NotE: You can access recovery by powering your phone down, then pressing and holding vol up+
power button.
How to enable init.d
Soon..
How to de-odex your ROM
Use JoelDroid's Tool
Link:http://forum.xda-developers.com/and.../script-app-joeldroid-lollipop-batch-t2980857
How To Make Your Custom BootLogo Flashable
- Download and extract this: https://mega.nz/#!a9MwWRTA!iaC6Ffjh5rQOkkjL9Wa7CyWC5seuXhRIId7egjXEDGU
- Put your bootlogo inside the folder where you extracted the file above.
- Rename your bootlogo to "bootlogo.bmp"
- Repack as zip the "META-INF" folder and the "bootlogo.bmp". Make sure it is only on Normal Compression.
- Flash it. :good:
​

Resrved #3

Reserved #4

problem on reflashing prerooted.. HEEELLPPP
on step REPARTITION, its says FAILED: OPERATION FAILED

Great But
How do i install MIUI recovery in my myphone my27 ? hehe thanks a lot

Good evening sir,
I would like to inform you that I successfully fixed myphone my27, but I have but 1 problem.
As you can see, I successfully downloaded and fixed my phone but I didn't installed the FDL. what will be the after-effect? "oi68.tinypic.com/2cqllas.jpg"
Edit: After fixing MyPhone My27, System Update doesn't work anymore and says "Your System is Damaged" :crying:
Plus, the connection with my WiFi is slower than my original speed when downloading in Google Play. ^_^

Hope it helps!!..
idrekdon said:
on step REPARTITION, its says FAILED: OPERATION FAILED
Click to expand...
Click to collapse
Hi!!.. Is your problem already solved??.. If not try this!!..
https://drive.google.com/file/d/0B_UTpYuvB4D4ejJXRFRkU0VZUUU/view?usp=sharing[/URL]
Note: its a notepad file, and links inside. Cause XDA won't allow me to post any outside link as a first timer.
Hope it helps. Cheers!!..
#GB

how to exit in miui recovery img? im having trouble with it.

Bakit hindi ma open ang link? Eror code ang mega, please fix it rightnow please, i need it rightnow please.

hi. after flashing my my27, ndi n po bumalik ung H+. pano po kya un?

Hi, good morning. I want to seek help, my MyPhone28s got stuck in a logo. I done TWRP but I accidentally wipe including OS. Please help me to get it back. Is there an other way.. Hope someone help me. Thank u..

[ROM] SuperROM for Karbonn A16 Custom ROM android 5.0 lollipop

[ROM] SuperROM for Karbonn A16 Custom ROM android 5.0
First of all we are with Custom ROM for Karbonn A16.
i gave it name SuperROM as this ROM super in almost every field. This is the Best custom ROM Ever made for Karbonn A16 in all expect.
you will void your warranty and i am not responsible if you did anything wrong step or brick your device.
features of this ROM
Small in size
Android 5.0 Lollipop
Dual SIM support
Pre Rooted
fast boot
free from all bloadware and come with less apps
buttery smooth for 512 MB RAM device
DSbattery saver inbuilt
gmail and maps with navigation inbuilt
Highly optimized RAM usage
Highly Optimized battery also
UNiversal init.d inbuilt to improve Build tweaks
superfast ROM To play games as you cant play those games in stock rom or any custom rom
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Bugs
You tell me. i already fixed almost every bug.
Requirments
ROOT your phone...
Backup Your IMEI data as this ROM Will erase your IMEI during installation but don't worry you will recover them after you successfully installed it. To take backup of your IMEI just follow these steps
{first of all download mtkdroid tool from here ---->Just google for MTKDroid TOOL and use it.
Now Extract this rar file with winrar or any winrar software.
connect your device, make sure you have usb debugging mode on.
now click on root button on MTKdroid tool to get root access, this is not a necessary step, grant the access on mobile.
You will see all details regarding your device.
Now click on IMEI/NVRAM button, you will see following screen
where select backup and backup your IMEI and NVRAM
HOW TO Restore them?
Just connect your Mobile while USB debugging mode on.
now RUN MTKdroid tool.
Now you will see your device details there.
so choose ROOT button and grant root access in your device.
now you will see IMEI/NVRAM button will active.
now choose it and you will below Backup and Restore buttons are active if you already did a backup as above guide.
Now simply choose Restore and first choose bin file and in next dialoge box choose .tar file.
NOW click on Reboot and you are done
}
Download SuperROM zip folder from here =====>DOWNLOAD
Install CTR recovery on your Karbonn A16, to install it just follow these steps
Make sure you enabled USB debugging mode in your device. To know how to enable it just google it.
Now download CTR recovery installer for windows from here====> DOWNLOAD
now install this software.
now connect your mobile to pc
RUN CTR V2.4
now choose easy installer for mediatek device and auto and follow the instructions\
finally you will reboot into ctr recovery.
Guide how to install it
First of all put the downloaded zip file into your internal or external SDcard
TAKE IMEI backup as i said it above, Dont skip this step otherwise you may lost your IMEI number
Now reboot into CTR recovery. you can reboot through Adb recovery tool with commond "adb reboot recovery" or you can reboot through physical button combinations ( Volume up with power button and choose recovery there)
In recovery menu choose "wipe"
wipe for factory reset
wipe delvik cache
install zip
choose sdcard if you putted into external card or choose internal card if you putted the zip into internal storage.
now choose your "SuperROM zip" file
after complete install "installtion completed" message will appear there.
CTR recovery have little bug so after complete of install just pull out the battery and put it back and start your device
you will successfully booted into SuperROM
now open dial pad and press *#06#
you will se message "invaild"means your IMEI numbers are deleted. Now recover them by following this small guide
Download IMEI write tool from here -----> DOWNLOAD
Now extract this zip file, you will get 2 folder IMEI and MT6572 DB
now run IMEI sotware
Choose Smartphone under platform, tick on IMEI number if you have dual sim then ticked IMEI 1 and IMEI 2 both and write IMEI number in next.
now click on Select DB
Now choose MT6572 DB folder
choose LWDE..............file and click open
Next choose APDB................and select open.
Finally click on start button.
now pull out your phone battery and connect to usb.
now just put the battery back and flashing will start and you will see green ok sign
after you see pass message in IMEI writer tool means you successfully recovered your IMEI number.
now you are ready to insert your SIM card and Enjoy this super fast rom SuperROM.
Thanks and credits for this ROM Is siong esteban Agua Hail

battery backup in this rom