First of all, I would like to thank a friend of mine from the Philippines for giving me the device.
Thank you @shinjitakashima
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
SPECS:
CPU: 1.3GHz Quad Core Processor
Chipset: SC7731
RAM: 1GB RAM
Storage: 8GB ROM
Display: 5-inch FWVGA IPS Display
Camera: 8MP Rear / 5MP Front
OS: Android Lollipop 5.1
Expandable Up to 32GB via MicroSD
Other Feats:Accelerometer, Dual SIM (Regular + Micro), 3G, 2G EDGE and GPRS Networks, Wi-Fi and Wi-Fi Hotspot, 3.5mm Audio Jack, Bluetooth 4.0, A-GPS, FM Radio, MicroUSB 2.0
Sensorsroximity Sensor, Ambient Light Sensor
Battery:2,000mAh Li-ion Battery
NOTE: Use Ctrl+F to find tutorials easily.
HOW TO ROOT[Kingroot Method]
In this method, you will use Kingroot to root your phone. The downside of this is you will have Kinguser as your root permission manager instead of SuperSU. But you can change to it later on. This is the easiest way to obtain root but changing to SuperSU from Kinguser might be difficult depending on your MY27's version.
Steps:
- Download latest Kingroot.apk from
http://king.myapp.com/myapp/kdown/img/NewKingrootV4.93_C146_B270_en_release_2016_06_06_105203.apk
- You will need a Wi-Fi connection with a stable Internet connection.
- Go to Settings/Security, and enable "Unknown Sources".
- Install the Kingroot.apk you downloaded earlier, and open/run it.
- Then click on "Try it".
- Then tap on the button which says "Get Now" which is located below the android icon.
-Wait for it to do it's job.
- Now your rooted! :victory: You can verify it by installing Root Checker from PlayStore.
HOW TO ROOT&REFLASH FIRMWARE[ResearchDownload]
In this method, you will reflash a pre-rooted stock rom/firmware using Spreadtrum's flashing tool. It's root permission manager is KingUser, and take note that this will ERASE ALL OF YOUR DATA IN YOUR PHONE.
Requirements:
- Spreadtrum Drivers
https://mega.nz/#!joVATDzL!8wtoc6EZxyIUmNsdeElZa-FTYFYTwU02-6Smtumm2yg
- MY27-PRE-ROOTED-FIRMWARE
https://mega.nz/#!O5cxjDxA!4VLWZ0np1-gv4KQFXF6WrYLf8i15GWRdR8SY0yM7iPo
Steps:
- Unpack the two files you downloaded earlier.
- Install the drivers first. Reboot may be necessary.
- After that, go to the folder where you unpacked the pre-rooted firmware.
- Go and find the ResearchDownload.exe and execute it.
- Click on the icon with two gears on it. **Second one from the left.
- Check if FDL1, FDL2, System and Userdata are checked/ticked. **Bootlogo is optional. Check it if you want to bring back the Philippine's map logo when the phone starts up.
- Now pull the battery from your phone.
- Reinsert the battery but DON'T power it on.
- Click on the icon with play in it **Third from the left.
- Ready your USB cable and press and press vol up+vol down of your phone then immediately insert/connect the USB cable.
- Flashing should start soon. You can release the volume keys as soon as the flashing starts.
- Wait for it to display "Passed" in it, then remove the cable.
- Remove the battery, reinsert it and power your phone on. It may take 5-25minutes on first boot so do not freak out.
- And there you go, you just unbricked/rooted your phone. :fingers-crossed::good:
Recoveries:
- MIUI Recovery **This is for v13!
https://mega.nz/#!bkdGXLrR!tkgWa_XfCfPSvQjoE0zB-ZryhPnqXxm4iZdLRTPXBhM
- TWRP **Touch is not working.. Somehow I manged to get adb on it but can't obtain permission. Need help on this
https://mega.nz/#!aocGFBxS!kA8_zHDCjovAy5NFk9Scm9S-5u_Yk5Zrukt09cSxXa0
Custom ROMs:
- None at the moment....
Mini-ROM/Patch
- MY27 Stock ROM Deodex Patch+Minimal G-Apps.
Steps:
- Go to MIUI recovery and do a factory reset.
- After that, flash the mini-rom/patch.
- Wait for it then reboot.
Link: https://mega.nz/#!Wtc10bRJ!Shv4crb3OqQ_QVe0VSvGelwuvSU_vliKT5GYcPMHoFE
NOTE: Please leave a feedback. It helps other users. :angel:
P.S : If there is already a custom ROM for this device, leave a reply below containing the link and dev/maker of the ROM. :good:
Tweaks:
- None at the moment. But I already managed to get init.d working on it and some init.d and build.prop is alread loaded. I'll be uploading it soon.
P.S : If there is already a tweak for this device, leave a reply below containing the link and dev/maker of the ROM. :good:
GUIDES: Developers & Experienced Users Only
WARNING! PROCEED WITH CAUTION! :fingers-crossed:
How to flash recovery
REQUIREMENTS:
- Flashify.apk
- Root permissions.
- A recovery.img **See second post.
STEPS:
- Download and install Flashify from Playstore. And also, download a recovery at the second post.
- Open Flashify and give it root permissions.
- Now, you might want to back up your stock recovery first. To do so, tap the "BACKUP/RESTORE" tab and then tap on "Backup current recovery".
- Otherwise, proceed to flashing the recovery by tapping on the "FLASH" tab and then tap on "Recovery Image".
- Navigate to the recovery you downloaded at the second post which comes in a ".img" format. **Be sure it is for your version!
- Then confirm that you want to flash the recovery. After it had flashed the said recovery, it will ask you to reboot or flash more.
- You might want to reboot for now to take a look at your new recovery :good:
NotE: You can access recovery by powering your phone down, then pressing and holding vol up+
power button.
How to enable init.d
Soon..
How to de-odex your ROM
Use JoelDroid's Tool
Link:http://forum.xda-developers.com/and.../script-app-joeldroid-lollipop-batch-t2980857
How To Make Your Custom BootLogo Flashable
- Download and extract this: https://mega.nz/#!a9MwWRTA!iaC6Ffjh5rQOkkjL9Wa7CyWC5seuXhRIId7egjXEDGU
- Put your bootlogo inside the folder where you extracted the file above.
- Rename your bootlogo to "bootlogo.bmp"
- Repack as zip the "META-INF" folder and the "bootlogo.bmp". Make sure it is only on Normal Compression.
- Flash it. :good:
Resrved #3
Reserved #4
problem on reflashing prerooted.. HEEELLPPP
on step REPARTITION, its says FAILED: OPERATION FAILED
Great But
How do i install MIUI recovery in my myphone my27 ? hehe thanks a lot
Good evening sir,
I would like to inform you that I successfully fixed myphone my27, but I have but 1 problem.
As you can see, I successfully downloaded and fixed my phone but I didn't installed the FDL. what will be the after-effect? "oi68.tinypic.com/2cqllas.jpg"
Edit: After fixing MyPhone My27, System Update doesn't work anymore and says "Your System is Damaged" :crying:
Plus, the connection with my WiFi is slower than my original speed when downloading in Google Play. ^_^
Hope it helps!!..
idrekdon said:
on step REPARTITION, its says FAILED: OPERATION FAILED
Click to expand...
Click to collapse
Hi!!.. Is your problem already solved??.. If not try this!!..
https://drive.google.com/file/d/0B_UTpYuvB4D4ejJXRFRkU0VZUUU/view?usp=sharing[/URL]
Note: its a notepad file, and links inside. Cause XDA won't allow me to post any outside link as a first timer.
Hope it helps. Cheers!!..
#GB
how to exit in miui recovery img? im having trouble with it.
Bakit hindi ma open ang link? Eror code ang mega, please fix it rightnow please, i need it rightnow please.
hi. after flashing my my27, ndi n po bumalik ung H+. pano po kya un?
Hi, good morning. I want to seek help, my MyPhone28s got stuck in a logo. I done TWRP but I accidentally wipe including OS. Please help me to get it back. Is there an other way.. Hope someone help me. Thank u..
Related
- OVERVIEW -
This Guide is designed to Teach the up and coming developers and Modders that have a Samsung Transform Ultra how to modify and customize their devices.
It is also here to serve as a one stop shop for experienced Users who are looking for the correct files to edit or root their device.
Sections said:
Section 1:
Tools files and overview.
Section 2:
ClockworkMod Recovery and Root
Section3:
Finding and Installing Custom Roms
Section 4:
Re-Installing the Stock Rom and Recovery
Section 5:
CREDIT!
Click to expand...
Click to collapse
- TOOLS AND FILES -
Universal Tools used Throughout the entire Guide:
-Odin Tool
-Samsung Drivers
ClockWorkMod Files:
-CWM_TU.tar
-TransformUltra.Ops
-tu_Root.zip
Current Custom Roms For the Transform Ultra:
-MegaTron Rom
-CTMod Rom
-Explosion Rom
-iDEV Rom
Stock Rom's, Recoveries and Kernels For both Boost And Sprint Transform Ultra's:
Roms:
-Stock Boost Rom
-Stock Sprint Rom
Recoveries:
-Stock Boost Recovery
-Stock Sprint Recovery
Kernels:
-Stock Boost Kernel
-Stock Sprint Kernel
Un-Root Files:
-TU_Boost_Unroot.zip
-TU_Sprint_Unroot.zip
Transform Ultra Complete Rooting and Modification Kit With Instructions:
-TU_Root_Mod_Kit.zip
Disclaimer said:
This guide is built to assist with developers and new users, in no way am i or any of the mentioned developers responsible for your device, follow the directs and nothing should go wrong
the information on this guide is set up to be corrected and edited frequintly so no links or files should be damaged, if any are please bring it to our attention and it will be resolved.
Click to expand...
Click to collapse
- ClockworkMod Recovery and Root -
Description said:
This section of the guide will walk you through Installing a Custom Recovery and Rooting your device.
Click to expand...
Click to collapse
Tools and Files you will need: (TU_Root.zip), (CWM_TU.tar), (Odin.exe)
1. Copy the file named (Tu_root) onto your SD card before we began.
2. Install samsung drivers if you don't have them already: (SAMSUNG_USB_Driver_for_Mobile_Phones_x86).
3. Open the Odin.exe in the folder : (Odin_Multi_Downloader_v4.42), [Run as administrator].
4. Hit the "OPS" button and select the TransformUltra.ops file from the folder (TransformUltra.ops).
5. Select the "One Package" Button and select the CWM_TU.tar from the folder (CWM_TU.tar).
6. Now put your phone into download mode (Vol down + camera + power).
7. Plugin your phone and the yellow COM should light up in the upper left.
(make sure your phones back is removed for quick access to the batter for the following steps!!)
8. As soon as you hit start, remove the battery from the phone.
9. Wait until Odin finishes and shuts off the phone. Pull the battery and take it off the usb so it doesn't reboot.
10. Put the battery back in the phone and boot strait into recovery (by Pressing and holding down the:
(Volume Down + power Button) at the same time.
11. Once in Recovery select "install zip from sdcard".
(note use the volume keys to go up and down the list and the power button to slect the option!)
12. Select "choose zip from sdcard"
13. Locate(tu_root.zip) from where you saved it on youe sd card.
14. Select "yes"
15. Once complete Navigate to where it says "Reboot Device" and Select it.
16. Once booted Install Something from The Google Play store (Install Superuser and update su and busybox).
(if you wish to Un-Root your Device Follow steps 12-16 but instead of installing (tu_root.zip), Install (tu_boost_unroot) or (tu_Sprint_unroot) depending on your carrier.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Congratz!!! your Transform Ultra is Now Rooted and can Install Custom Roms!
- FINDING AND INSTALLING CUSTOM ROMS -
Description said:
This Section Will teach you how to Install Custom Roms onto your Device.
Click to expand...
Click to collapse
1. Put the Rom you want onto your SD CARD!
Here's a list of Roms for the Transform Ultra
-MegaTron Rom
-CTMod Rom
-Explosion Rom
-iDEV Rom
2. Boot into Recovery.
3. Clear Dalvik Cache(in advanced).
4. Clear Cache.
5. select "install zip from sdcard".
6. Select "zip from sdcard".
7. Locate the Rom you wish to install onto your Transform ultra and Select it.
8. Let the Recovery Do its Thing and Reboot your device
Your Done! enjoy your new Rom!:rock:
(note: ONLY INSTALL ROMS THAT YOU KNOW IS BUILT FOR YOUR DEVICE!)
- Re-Installing the Stock Rom and Recovery -
Description said:
This section of the guide will walk you through Re-Installing the Stock Recovery and Rom onto your device for both BOOST and Sprint.
Click to expand...
Click to collapse
1. Install(if you havn't) Odin and start it up (in administrator mode).
2. put your device into Download Mode (volume down + camera + power buttons) at the same time.
3. plug your Usb cord from your computer Into your phone you will see a yellow box with (COM) light up, thats your phone.
4. Click OPS and select the file (TransformUltra.ops).
5. For either version (Boost / Sprint ) Find the Option called (One Package) you will be using that from now on.
6. Using "One Package" select The corasponding Stock Rom you Downloaded. (and click start).
7. Once Odin is finished, repeat the previous Steps for The (Tu_(carrier name)_stock_recovery.Tar
your phone is now Back to Stock.
:beerglass:CREDIT AND SUPPORT!:beerglass:
Description said:
This section is to present everyone who made this thread AND these roms and tools possible! so say thank you!
Click to expand...
Click to collapse
1. Chevanlol360
2. Loota
3. Bloodawn
4. mavrikmeercat
5. Slayer72
6. jdogrambo
7. ibrickphones
8. bads3ctor
9. NGD1
GO SAY THANK YOU FOR THIS AWESOMENESS!!!!!!
Youcan Find us all Mainly at www.Phandroid.com!
is there any chance this will work on samsung galaxy chat gt-b5330 ? with ics 4.0.4 ? .... i`m afraid im gonna brick it ...
if you use the right files you'll be fine
_tu_root is no longer available from the provided link. Does anyone have a mirror?
2 months later and tu_root is still down, and just moments ago the "complete kit" disappeared.
---------- Post added at 05:05 PM ---------- Previous post was at 05:01 PM ----------
Working link to tu_root: https://dl.dropbox.com/u/84283344/tu_root_.zip
Most of the links are now broken since the Dropbox reset too.
I've been trying to find the root files for this phone everywhere and all the links are just broken. I just wanna root it to remove the boost bloatware and boot animation so I can use it as an emulator for old games but no luck finding any of the files.
Hey NGD1
I was curious If you still have the Transform Ultra Tu_root.zip file
if not its totally cool I was just curious if it is still out there somewhere in the world
I spent like 4 hours searching for it to no avail
Well, as you know, G610-U00 emotion UI (Official Stock firmware) is annoying, lets try to change the overall UI completely from boring Chinese UI into popular phones' UI.
Before we go, back up everything you need (Apps, Contacts, etc...)
Your phone bootloader must be unlocked to do these processes!!!!
1.Download and install VRoot ENGLISH VERSION on PC and root Your G610-U00 first. (Skip this step if you have already rooted your phone)
2.Download and install Mobile Uncle Tools on your phone.
3.Download TWRP English recovery for G610-U00 first and put it in SD card.
4.Download Rom below that you want to install and put it in SD card.
5.Open Mobile Uncle Tools and "Allow" root Permission and choose "Recovery Update" in Mobile Uncle Tools and then
choose "ydss-g610-u00-twrp-recovery-en-v2.0".
6.Mobile Uncle Tools will show you a message "Reboot into Recovery?" Choose "Yes".
You can also go to recovery mode this way
(1)Power off your phone
(2)Press and "HOLD" volume up button and then power button until you get into RECOVERY MODE.
7.In the TWRP recovery,
(1)Choose "Wipe"
(2)Choose "Advance Wipe"
(3)Choose Dalvik Cache, Cache, Data, System
(4)Pull the Slider below from the left to the right. Now your Phone is clean and ready to install new ROM
(5)Go Back to the menu with Back Key
(6)Choose the button "Install"
(7)Choose the ROM (zip) you have downloaded
(8)Pull the Slider below from the left to the right to install the zip and wait for the installation process
(9)After Installation process choose "Reboot"
ENJOY YOUR NEW ROM!
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Note (Optional) : For better experience, when you want to download, you should use Chrome Browser to translate pages because the download pages are written in Chinese. If you don't have Chrome Browser, just see the image at the end of the post how to download from.
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Files to download
G610-U00 custom ROMS(All Roms Have Root Access)
Edit : Google drive link for those who can't access Baidu (by a request).
Google App Installer for no google app included roms(Installing using apk, Need root access)
DEFAULT LANGUAGE IS CHINESE, AFTER BOOT UP, GO TO SETTING>LANGUAGE AND INPUT>LANGUAGE>CHANGE TO ENGLISH.
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
In any case, if you want to go back to official stock firmware,
(1) Download and flash it in TWRP RECOVERY (I'm not sure it would work in CWM but has 70% success rate )
(Without flashing this stock recovery in TWRP, you won't able to flash Official Firmware).
(2)Download extract the downloaded zip and copy the "dload" folder to SD card.
(3)Power off the phone and Press and Hold "Volume Up + Volume Down and Power Button" until you see the install processing cmd lines on your phone. Wait for the process and the phone will reboot automatically after update finish.
Now you are on the official stock firmware.
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Notice : YOUR PHONE MIGHT TAKE 10 TO 15 MINUTES TO FINISH BOOT AFTER "FLASHING (INSTALLING) NEW CUSTOM ROM" OR "INSTALLING OFFICIAL STOCK FIRMWARE". IF IT WOULD TAKE LONG MORE THAN 15 MINUTES, JUST PULL THE BATTERY AND BOOT AGAIN. THIS COULD SOLVE THE PROBLEM OF TAKING LONG TO BOOT.
***IMPORTANCE*** : FROM PHONE SETTINGS, NEVER DO "FACTORY DATA RESET" OR NEVER "UNMOUNT" "INTERNAL SD CARD OR INTERNAL STORAGE" WHILE YOU ARE ON "CUSTOM ROMS". IT WILL LEAD TO BOOTLOOP. IF YOU WANT TO DO FACTORY DATA REST GO TO TWRP RECOVERY AND CHOOSE WIPE, PULL SLIDER TO DO FACTORY RESET. IF YOU EXPERIENCE THIS PROBLEM, SEE ABOVE METHOD "GOING BACK TO STOCK FIRMWARE" AND INSTALL CUSTOM ROM PROCESS AGAIN.
I am not responsible for any damage to your phone caused by following this method. I have tested this method and it is working smoothly for me. Be sure to do precisely as my instructions and I am pretty sure this will work 100%. Good Day to you.
Post below to ask any question.
Credits to
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
S4 ROM
XPERIA C ROM
AOSP ROM
MIUI ROM
Post below if you want to know about some mods for these roms,
like removing "3G" signal prefix,
hiding second No SIM slot,
using themes on AOSP roms,
S3/S4 icons, S3/S4 or LG lock screens with S4 and Xperia Launchers
Xperia Music Players with Acid Audio Engine version working on these roms
more features I have collected and tested for these roms...
G610S is cheap and has resonable specs, so I decided to show the ways I have tested,
I don't mean I know everything.
Brands, Mods and Roms are properties of their respective authors/companies.
I am sharing the working way I have tested many times on these roms.
Thanks for reading. Good day to you!
Click "Thanks" button if I made some help for you.
hi
are all these roms compatible with g610-u20? thanks!
geloko said:
are all these roms compatible with g610-u20? thanks!
Click to expand...
Click to collapse
I am sorry these are only for G610-u00.
Feel free to share something about your experience installing these custom ROMS. I want to hear your feedback, my dears. ♥
Sent from my G610-U00 using xda app-developers app
I never went to recovery mode after clicking yes on mobile uncle tools and now my mobile is stuck in bootloop... Could you please help me find a way out????
My mobile is G610-U20.. that's where I made a mistake....
thesumanthapa said:
I never went to recovery mode after clicking yes on mobile uncle tools and now my mobile is stuck in bootloop... Could you please help me find a way out????
My mobile is G610-U20.. that's where I made a mistake....
Click to expand...
Click to collapse
OMG!!!
These custom roms are only for G610-U00.
You should read thoroughly before you do.
Try reflashing official firmware as my instruction.
Dont' download the firmware I provided.
This is only for G610-U00.
Download official firmware from Huawei website for G610-U20.
[url=http://*******/sYcaJ]MTK NVRAM tool
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
STEP 1 : BACKUP
BEFORE MAKE ANYTHING — IMPORTANT– BACKUP YOUR IMEI NUMBER WITH MTK NVRAM TOOL. YOU CAN ALSO DOWNLOAD IT IN Links other than Needrom:
WHEN INSTALLING THIS ROM YOU LOSE YOUR IMEI NUMBER SO YOU MUST DO THIS: YOU NEED TO HAVE ROOT ON YOUR PHONE AND A RECOVERY INSTALLED LIKE TWRP 2.7
If you come from 4.2.9 Stock Rom you can root it with FRAMAROOT 1.93 –> Then install TWRP 2.7 in mobile unclemtktools with recovery update
PUT MTK NVRAM TOOL.zip into sdcard
ENTER TWRP RECOVERY :
Power off the phone, then do the following:
– Power button + volume button up, to enter the recovery mode.
INSTALL MTK NVRAM TOOL.ZIP FROM SDCARD withouth any wipe. This is a fantastic AROMA TOOL, so you only need to backup your NVRAM, then exit and return to recovery.
ATTENTION: MOBILEUNCLETOOLS DOESN'T RESTORE IMEI IN ANDROID 4.4 SO YOU HAVE TO RESTORE IT ONLY WITH MTK NVRAM TOOL
STEP 2 : INSTALL AOSP ROM
IN TWRP perform a full WIPE –> WIPE–> ADVANCED WIPE–> SELECT
– Dalvik Cache
– Cache
– Data
Return to recovery main interface and Install zip from sdcard:
- Select your ROM FILE.ZIP –> It will launch my installation procedure
- At the end, don't reboot, INSTALL ZIP FROM SD CARD –> MTK NVRAM TOOL.ZIP –> This will launch AROMA –> Restore your NVRAM/IMEI previously saved on your sdcard –> EXIT –> REBOOT SYSTEM
All done, Enjoy your new KitK4tAOSP ROM!! PATIENCE, THE FIRST BOOT IS ABOUT 5 MINUTES.
================================== ATTENTION!!! ==================================
I invite everyone to make a nandroid backup. Only if you have done the backup and you are able to restore the device then you can write me relatively few bugs in the rom or any other problem.
So ATTENTION! … You did not do a Nandroid backup? … You are not able to restore the device? … Well, do not write to me, because I will not answer to you!!
================================== ATTENTION!!! ==================================
the way to force imei restore on dg550 or any Mediatek phone
In order to force imei restore in some instructions on screen nes like doogee dg550 for example you must follow these instructions :
Download and install the Kingroot APK from their website.
Open the APK in your phone and press the big circle 2 times untill it starts circling.
After you get ROOT ontice download from Google play the Busy Box APK - open it and confirm root access when Kingroot pop ups.
Now press the Install icon.
Go to Settings of your android phone and in Developers advanced settings ensure that USBDeDebugging is enabled.
Now install to your PC the lattest newest version of MTK root tools.
You must ensure that your PC has Mediatek drivers if not you shoukd install these ADB drivers. - google it...
Extract the ZIp content of MTK droid tools file to new folder and click the small Bird drawing icon.
Now connect the phone to your PC and make sure mtk droid tools reads it.
Now you should have the small square icon on bottom left side turn into yellow color.
Click the root icon and click YES to every popup - wait until the square indicator becomes green.
Now press the IMEI... icon and follow the instructions on screen than reboot your phone. s
By the way the IMEI numbers apear on a sticker under the battery of phone.
alone10 said:
In order to force imei restore in some instructions on screen nes like doogee dg550 for example you must follow these instructions :
Download and install the Kingroot APK from their website.
Open the APK in your phone and press the big circle 2 times untill it starts circling.
After you get ROOT ontice download from Google play the Busy Box APK - open it and confirm root access when Kingroot pop ups.
Now press the Install icon.
Go to Settings of your android phone and in Developers advanced settings ensure that USBDeDebugging is enabled.
Now install to your PC the lattest newest version of MTK root tools.
You must ensure that your PC has Mediatek drivers if not you shoukd install these ADB drivers. - google it...
Extract the ZIp content of MTK droid tools file to new folder and click the small Bird drawing icon.
Now connect the phone to your PC and make sure mtk droid tools reads it.
Now you should have the small square icon on bottom left side turn into yellow color.
Click the root icon and click YES to every popup - wait until the square indicator becomes green.
Now press the IMEI... icon and follow the instructions on screen than reboot your phone. s
By the way the IMEI numbers apear on a sticker under the battery of phone.
Click to expand...
Click to collapse
Could you please make a video explaining the process?.
Well, I just purchased this device and came here after that to look at what we had and I'm disgusted.
And there are several reasons for that, being:
1 - Locked Bootloader...
2 - This forum seems somewhat abandoned, which leads it to be somewhat disorganized.
EdiT:
Thanks to our friend repey6 > http://forum.xda-developers.com/member.php?u=5704037
TWRP 2.8.7.0 is now included, and it works just ok, with all functionality.
I strongly recommend you to use it instead of any other recovery. Just make sure to backup your ROM again after installing it, as CWM or Carliv backups won't work in TWRP.
I replaced the old TWRP included in the attachments with the new one provided by repey6, but the installation process remains the same.
Plus, this was not created by me and it's mad old (2014). But still it works better than the Carliv Recovery we have available here...
So Let's go. The proccess is the same for both, just choose the recovery image you want in the end of the topic.
(almost forgot to say that if your phone bricks it's you responsibility, I tested it in mine and it is working fine)
STEPS:
STEP1- Root your phone (if it's not rooted yet).
To root your phone you'll need to:
a-Download the framaroot APK provided in the attachments
b-Install it then click in the Boromir option and the su binary will be installed.
c-Download SuperSU from google play store.
That's all, simple like that.
STEP2- Check your bootloader's S1 Version
a-Open your dialer and input *#*#7378423#*#* , then go to Service Info>Software Info> S1 Boot Version.
b- Check if yours is 2.14.J.2.6 or 2.14.J.2.13 or 2.14.J.2.16 . If yours is one of these go ahead, it should work just fine and you can proceed.
If yours is 2.14.J.0.68 do not proceed, as it will 100% brick your phone.
c- My phone has S1 Boot Version 2.14.J.1.15 and in spite of the developer having not mentioned anything about it, I risked it all and my phone flashed the recovery normally, so if your version is also 2.14.J.1.15, it should work just fine and you can proceed.
STEP3 - Install the recovery
NOW, BE EXTREMELY CAREFUL HERE, OTHERWISE YOU WILL HARD BRICK YOUR PHONE:
a-Download the mobileuncle.apk file provided in the attachments and install it.
b-Download the twrp_xperia_C.img file provided below and put it in your internal memory (not on the external). Rename it to recovery.img, otherwise mobile uncle won't see it.
Now, here's the part you have to mind, so you won't brick your phone.
Mobile uncle can install a recovery using one of two methods. One is by installing the image from your internal memory (which we'll be doing). Other is installing it from the internet.
Now, YOU DON'T WANT to install a recovery from the internet, as mobile uncle doesn't provide any image for your device. So if you flash any of these recoveries, you'll never be able to make your phone boot again.
See in the image below and you'll get what I mean:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
c - So, before proceeding TURN OFF YOUR WIFI AND DATA CONNECTIONS so that mobile uncle won't show any recovery from internet
d-Open mobile uncle.
e-Grant Super User
f-Press "Recovery Update"
g- With wifi turned off, you'll see only your recovery in the screen
h- Click it, the file size of the file I'm posting must be around 6MB ( 6210KB for CWM), if it's different cancel and download file again.
i- press ok and restart.
DONE
:good:
EDIT:
I just noticed that after flashing the recovery you might get your phone stuck in the SONY logo after it.
In fact it happened to me, but just once.
If that happens don't panick. Recove the cover of your phone and besides the SIM-2 slot you'll see a tiny role with the word "reset". Insert a needle in there and your phone will restart normally.
CREDITS FOR CWM
Prashanth Jraj
Credits for posting it on the net and for the original tutorial:
informationlord.com
credits for TWRP 2.8.7.0
Miha_xXx
Original Post (for TWRP - in Russian): Click Here
credits for this tutorial:
me
ATTACHMENTS BELOW
Thanks for the guide! Does this also work on the C2305 model, or is it strictly for C2304?
Syd_M said:
Thanks for the guide! Does this also work on the C2305 model, or is it strictly for C2304?
Click to expand...
Click to collapse
It should work in both, I'm using a recovery for C2305 in my C2304.
Just don't try flashing a C2305 ROM on your C2304. It will not hardbrick your phonw, but the SIM cards will not work and you will get a mad functioning phones.
Some custom ROM's based on stock firmware work in both though.
Hey anyone tried for xc 2305???
So my S1 bootloader version is: 2.14.J.0.68. Is it for sure there is nothing that can be done?
SMIT120 said:
Hey anyone tried for xc 2305???
Click to expand...
Click to collapse
sid4913 said:
So my S1 bootloader version is: 2.14.J.0.68. Is it for sure there is nothing that can be done?
Click to expand...
Click to collapse
Sorry for the late reply! Haven't been able to test this until recently due to an issue getting my PC to work properly with my phone. Anyway, I would like to confirm that I was able to flash this on my Xperia C2305 that had S1 Boot Version 2.14.J.0.68. The photo below is proof of CWM running on my Xperia C2305:
Things you will need:
WMShua SuperFlash: http://soft.flushrom.com/WMShuaSetup.exe (after installing, you can change the language to English by renaming Program Files/wmshua/language to Program Files/wmshua/language_x)
Xperia C 16.0.B.2.16 FTF: C2305_16.0.B.2.16_TacoNikky.ftf or C2305_16.0.B.2.16_Congngheviet.ftf (pick one; I used TacoNikky's version)
Procedure:
1. Open WMShua, then click on Flash (not Super Flash). Browse to the FTF file you downloaded. You can choose to backup system before flash (I unchecked it on mine). Follow the screenshot below for guidance:
2. Turn off your phone. Next, hold down the Vol- (volume down) button on your phone. While holding down, plug in the micro USB cable. The LED will flash red. When it changes to green, release the Vol- button. WMShua should automatically try to install the needed drivers. After installing drivers, it will begin the flashing process. If your phone turns on instead, simply unplug it from the USB, turn it off, then try again.
The flash process may take a long time (it took 30+ minutes for me), and sometimes it may look like it hanged, but it's actually working. Just be patient. Once it reaches 100%, your phone will automatically boot up. Check your S1 Boot Version—it should now be 2.14.J.2.16. You may find that you've lost root, so you will need to root it again (I use KingoRoot). After rooting, follow the instructions on the first post to install CWM or TWRP. Good luck!
BLU Studio G D790Q MegaThread
MT6580 Android 6.0
512MB RAM, 4GB ROM
This phone is extremely hard to find reference of. The D790Q is only available (to my knowledge) in Best Buy stores. Their site here even says it runs KitKat.
Antutu:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Kernel Source (WIP): https://github.com/Qiangong2/android_kernel_blu_d790q
Device Source (WIP): https://github.com/Qiangong2/android_device_blu_d790q
RECOVERY and STOCK FIRMWARE
Here is the link to the Stock Firmware that you can flash with SP Flash tools if something goes wrong.
Thanks to AndroidMediatekRecoveryDevelopment, we have a recovery for our device! CTR 6.6 to be exact. It is available here: https://www.androidfilehost.com/?fid=673368273298930861
How to Root
1) Download the latest SuperSU zip from http://www.supersu.com and move to external SD card
2) Flash Recovery using SP Flash Tools
3) Boot into Recovery immediately by holding Power and Volume up button on phone (IMPORTANT! Otherwise the phone will replace the custom recovery with the stock recovery)
4) Install the SuperSu zip
5) Reboot
ROMS
OTHER
http://www.needrom.com/download/blu-studio-g-d790q/
do I have to make a scatter file to flash the recovery? and not use any other scatter file? by the way I am trying to root my blu studio G d790q so I could use a ram extender. I tried to use a scatter file from a stock rom I downloaded from this http://www.needrom.com/download/blu-studio-g-d790q/
--Basically this is what I have done--
-> launched SP tools
-> clicked `choose scatter file` (MT6580_Android_scatter.txt)
-> unchecked everything except recovery and browsed to my downloaded ctr-6.6-d790q.img
-> click download
-> connected my powered off device and while the bar below seems to be 100 it was color red and it says something have changed and I should download a file which I wasn't able to note down
-> I tried pressing down volume + power but it showed me `Factory mode` I guess its not the ctr one so I just chose `reboot`
-> found my date changed to `January 1` after reboot but I fixed it by just calibrating 'automatic time zone' and everything is good again.
Just need some clarification on flashing this recovery so I can root it properly thanks for the help! Cheers!
one more thing isn't it volume up + power to boot to recovery?
amdcora said:
do I have to make a scatter file to flash the recovery? and not use any other scatter file? by the way I am trying to root my blu studio G d790q so I could use a ram extender. I tried to use a scatter file from a stock rom I downloaded from this http://www.needrom.com/download/blu-studio-g-d790q/
--Basically this is what I have done--
-> launched SP tools
-> clicked `choose scatter file` (MT6580_Android_scatter.txt)
-> unchecked everything except recovery and browsed to my downloaded ctr-6.6-d790q.img
-> click download
-> connected my powered off device and while the bar below seems to be 100 it was color red and it says something have changed and I should download a file which I wasn't able to note down
-> I tried pressing down volume + power but it showed me `Factory mode` I guess its not the ctr one so I just chose `reboot`
-> found my date changed to `January 1` after reboot but I fixed it by just calibrating 'automatic time zone' and everything is good again.
Just need some clarification on flashing this recovery so I can root it properly thanks for the help! Cheers!
one more thing isn't it volume up + power to boot to recovery?
Click to expand...
Click to collapse
Did you make sure to plug in the phone with the battery taken out?
I did remove battery,
This time I also installed unsigned drivers for mtk for windows 10 64bit , also rebooted PC on startup to make it accept unsigned drivers (option 7) redo the process but now it took a bit of time to get that bar at 100 but still red it came up with a failed error
here are the two screenshots for each failed attempt
Upon further playing with it and being patient, i think it looks like somethings wrong with my current stock rom in a way that it is different from the stock scatter file which I am using, I tried downloading mtk droid tools and it showed me this
any ideas?
amdcora said:
I did remove battery,
This time I also installed unsigned drivers for mtk for windows 10 64bit , also rebooted PC on startup to make it accept unsigned drivers (option 7) redo the process but now it took a bit of time to get that bar at 100 but still red it came up with a failed error
here are the two screenshots for each failed attempt
Upon further playing with it and being patient, i think it looks like somethings wrong with my current stock rom in a way that it is different from the stock scatter file which I am using, I tried downloading mtk droid tools and it showed me this
any ideas?
Click to expand...
Click to collapse
Sorry for the late reply,
V22 is the stock ROM the D790Q ships with. Unfortunately, the only stock ROM is V16. That may be the issue why you cannot flash the recovery, you have to format all and download the whole V16 stock ROM.
For some reason, you cannot update to V22 from V16 so I was not able to test the recovery on V22.
amdcora said:
I did remove battery,
This time I also installed unsigned drivers for mtk for windows 10 64bit , also rebooted PC on startup to make it accept unsigned drivers (option 7) redo the process but now it took a bit of time to get that bar at 100 but still red it came up with a failed error
here are the two screenshots for each failed attempt
any ideas?
Click to expand...
Click to collapse
First off these guys got you backwards that's why your stuff doesn't work.. On BLU its VOL UP to enter recovery.. not VOL DOWN as mr qinagong suggests.
As you can see from your screenshot it says format+download.. Choose the other option and it will work. If SP doesn't work on download choose DLOAD+FORMAT, if it doesn't work on that. choose the opposite. Also battery should be IN ! Ignore the people who say it should be out. Turn off phone, begin download or download + format and wait a second or two and then insert USB cable.
romish said:
First off these guys got you backwards that's why your stuff doesn't work.. On BLU its VOL UP to enter recovery.. not VOL DOWN as mr qinagong suggests.
As you can see from your screenshot it says format+download.. Choose the other option and it will work. If SP doesn't work on download choose DLOAD+FORMAT, if it doesn't work on that. choose the opposite. Also battery should be IN ! Ignore the people who say it should be out. Turn off phone, begin download or download + format and wait a second or two and then insert USB cable.
Click to expand...
Click to collapse
Wow, I didn't think people actually read this thread
You're right on the volume button part. I will change that. I've always removed the battery, plugged in the usb, and reinserted the battery and it has worked for me.
Sent from my Q5 using XDA Free mobile app
Ops Stock Rom link is a paid membership site $3 per month. I managed to find a mirror for D790Q 6.0 stock. I know its an old thread but just in case anyone needs this and gets stuck because of OPS suggestive subscription link.
https://firmwarefile.com/blu-studio-gd790q