Since our device share the same dimension with the original s2,finding a suitable case is not really hard. I've brought the neo hybrid cases but found it too big(provide very good protection though) ,so i ended up using normal matte hard plastic cases(pretty slim).
What cases u guys brought?any good suggestion? :victory: :victory:
Mercury RED
extraordinarily nice with the red case!
Black soft plastic shell with coloured silicone inlay (on Ebay). Adds a little bulk but protects very well.
Custom-made faux leather case.
I bought cheap faux leather case, but leather spoilt after exposed to sun for long.
I removed the rubber container for my device and made a custom faux leather case by reusing faux leather skin of my old planner.
Quality (leather, sewing, etc) not as good as those in the market, but I have a pen and notepad addon that is friendly for those who prefer pen+notepad over SPlanner.
Brian_SGW_CM9 said:
Mercury RED
extraordinarily nice with the red case!
Click to expand...
Click to collapse
i think it's nice,but even nicer if white clor but i don't like glossy cover
AmoledIsBetter said:
Black soft plastic shell with coloured silicone inlay (on Ebay). Adds a little bulk but protects very well.
Click to expand...
Click to collapse
wow,sound good,will look into
Raven_Yen said:
Custom-made faux leather case.
I bought cheap faux leather case, but leather spoilt after exposed to sun for long.
I removed the rubber container for my device and made a custom faux leather case by reusing faux leather skin of my old planner.
Quality (leather, sewing, etc) not as good as those in the market, but I have a pen and notepad addon that is friendly for those who prefer pen+notepad over SPlanner.
Click to expand...
Click to collapse
does it bulky? i think will look good and feel good,fit with slim s2+
nickchk said:
does it bulky? i think will look good and feel good,fit with slim s2+
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Image taken last week.
[ Faux leather cover + rubber S2 casing + pen holding site + pocket (I added a notepad now) + elastic strap (not in image, to strap the whole casing closed)
Unfortunately my design is bulky. It has 4 inch width and 5 inch height when closed, even larger than my wallet. I need to insert it into my pocket properly because a slip-in will not work. The height is default (following the height of S2/+), the width can be resized to 3 inch wide (closed in folding style) if you were to relocate a pen holder to far right (if you ever need).
Do try if you have time and materials, a chance to elaborate your creativity and custom style. :good:
My next project will be 3.5< inch width (external pen holder at far right), with Velcro to hold the case closed.
Raven_Yen said:
Image taken last week.
[ Faux leather cover + rubber S2 casing + pen holding site + pocket (I added a notepad now) + elastic strap (not in image, to strap the whole casing closed)
Unfortunately my design is bulky. It has 4 inch width and 5 inch height when closed, even larger than my wallet. I need to insert it into my pocket properly because a slip-in will not work. The height is default (following the height of S2/+), the width can be resized to 3 inch wide (closed in folding style) if you were to relocate a pen holder to far right (if you ever need).
Do try if you have time and materials, a chance to elaborate your creativity and custom style. :good:
My next project will be 3.5< inch width (external pen holder at far right), with Velcro to hold the case closed.
Click to expand...
Click to collapse
i don't think thats too bulky,but wider perhaps ,still acceptable for me :good: well,if me,i think pen won't be necessary,so will be less wider. i might try to spray or 'carbonize' my existing case,thanks for the idea and beautiful case
(ps: i noted the ''Rm5.30'' prize tag,seems like we are both from bolehland,hello fellow countryman :highfive: )
nickchk said:
i don't think thats too bulky,but wider perhaps ,still acceptable for me :good: well,if me,i think pen won't be necessary,so will be less wider. i might try to spray or 'carbonize' my existing case,thanks for the idea and beautiful case
(ps: i noted the ''Rm5.30'' prize tag,seems like we are both from bolehland,hello fellow countryman :highfive: )
Click to expand...
Click to collapse
Hi compatriot :highfive:
Found some images in my SD card
Self-sewn elastic strap
Comparison of size (new and old respectively)
Muvit Case
I have this one and it is awesome!
I use a compact camera case. It is with the exact inner dimensions for my S II Plus and with blue color close to my phone's. It has 3 separate sections - one for the phone, one I use for money, and one on the back with zipper which accommodates my ID, driving license, club and credit cards, headphones, a microfiber cloth for cleaning the phone, a flashdrive and a little carabiner for the ear on the back of the case - attached on the ear you can mount the case everywhere. With the case also came a neck strap, which I don't use. Despite all the stuff it remains relatively slim. Below are some images...
safariking said:
Muvit Case
I have this one and it is awesome!
Click to expand...
Click to collapse
One question: can you use phone in landscape mode easily? I am - does the front cover, when it is on the back side does not make the phone harder to be handle?
rgds
Yes no problems
Verstuurd van mijn GT-I9105P
What's the price for it ?
Sent from i9105P
I paid around 20 euro's for it
Sent from my GT-P7310 using xda app-developers app
safariking said:
I paid around 20 euro's for it
Sent from my GT-P7310 using xda app-developers app
Click to expand...
Click to collapse
Did you get from ebay ? If yes can you provide a link ?
Sent from i9105P
No I got it from a dutch shop I life in the netherlands sourche the web please
Verstuurd van mijn GT-I9105P
I use a hard case for bad conditions!
Sent from my GT-I9105P using XDA Premium 4 mobile app
I just use a mint coloured silicon/hardback cover case, seems durable and looks cute!
muhaha might try and see if I can get a cute plugy for the top earplug jack to match it~
Related
hi guys..
anyone got a chance to try out Melkco case for SGR?
http://www.melkco.com/scripts/main/viewitem-SS9103TPLT1BK-9103.html
this one combined TPU and PC which is back is hard surface and sides is TPU.
or Momax brand
http://www.obostore.com/momax-pc-tpu-i-case-pro-for-samsung-galaxy-r-p-3163.html?
I wanted to order it but there was no review for this product yet..
I bought these two for my SGR
Nilkin Rainbow TUP softcase
http://www.obostore.com/nillkin-rainbow-tpu-soft-case-skin-for-samsung-galaxy-r-p-3009-c-186.html
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Capdase Soft Jacket 2 Xpose
http://www.obostore.com/capdase-sof...e-case-for-samsung-galaxy-r-p-3540-c-186.html
As you may have noticed, Galaxy R does not have a lanyard slot... These cases solve the lanyard problem. I hope so. I am yet to receive them. Hopefully they're worth the price.
Just ordered the momax from taobao, I will let ya'all know how it is when it arrives - was super cheap, 35RMB
I ordered this case its perforated with holes
http://www.ebay.co.uk/itm/110797851...X:IT&_trksid=p3984.m1439.l2649#ht_1556wt_1139
I tried one of those and wasn't very happy with the fit, it didn't seem to 'lock' onto the phone correctly, and the buttons felt inaccesible, due to the case being higher on the outside than the face of said buttons.
Hopefully, you're getting a better one!
I've been using case mate barely there for one week, it wasn't the cheapest one but I'm more than happy with it so far. Finally something thin, tight and solid that fits just perfect.
(no dirty thoughts please, it's still just a phone ;P)
Sent from my GT-I9103 using XDA App
well, the momax arrived today, and first response is 'ooh nice!'
It's rubberized, and although the bumper is thicker than I expected, it does have the volume/power buttons as raised parts on the case so they're easy to locate but will definitely take some practice to use.
The case also came with a free security screen protector (one of the ones that dims from an oblique angle) I'm yet to apply this as I'm currently sitting in a dusty room (lol)
So, for the price I'm happy, and the fit is great, with easy access to the mini USB, audio jack, and as previously mentioned the hardware buttons are usable, but might take a few days for the rubber to soften up a bit so they are easy to hit.
Also, the speaker is now louder when I'm playing games, as my hand doesn't completely cover the part of the phone where it's located.
yo guys.. post 1 or 2 pics if u guys can share...
I would like to see those momax and case-mate barely there...
Cheap and good softcase
I have a very cheap Qbits
Amazon product id: B005XID5SI (sorry cannot post links yet due to forum restrictions)
Search anazon.de for "SAMSUNG i9103 GALAXY R SILIKON SKIN CASE"
I'm happy with it:
it's fitting perfectly
the phone doesn't slip, neither from my hand nor any surfaces
seems to be a working protection
makes putting your phone onto a desk a silent experience (during meetings,... )
I found Capdase fit best for i9103. the button fittings are nice, the rubber feels thin to the skin, and it leaves enough room so you can stick the usb cable nice and easy. Comes in black, transparent black (pic) or white. Cheers
Moodaleon said:
I found Capdase fit best for i9103. the button fittings are nice, the rubber feels thin to the skin, and it leaves enough room so you can stick the usb cable nice and easy. Comes in black, transparent black (pic) or white. Cheers
Click to expand...
Click to collapse
Yup ordered this case onlyn will come soon to me i will update u with pics and review. Btw i orderex it for 499rs(10$) and it has a free watch+ capdase screen protector
Sent from my GT-I9103 using xda premium
yep its a goodie. paid 10usd i think its worth for the dealie. the cheap rubber one are like 2.50usd here in hk but they are crap. no dissing with the korean tpu or momax but they definitely fatten out the slimmness big time compare to the capdase
Sent from my GT-I9103 using XDA App
hapticc said:
Yup ordered this case onlyn will come soon to me i will update u with pics and review. Btw i orderex it for 499rs(10$) and it has a free watch+ capdase screen protector
Sent from my GT-I9103 using xda premium
Click to expand...
Click to collapse
Hey.. from where did you buy this cover? eBay? Can you please post the link?
pankajramnani said:
Hey.. from where did you buy this cover? eBay? Can you please post the link?
Click to expand...
Click to collapse
ezeekart.com/p-2850/Capdase-Soft-Jacket2-Xpose-for-Samsung-Galaxy-R(Tinted-Black).html
ezeekart.com/p-2852/Capdase-Soft-Jacket2-Xpose-for-Samsung-Galaxy-R(Tinted-White).html
www.ezeekart.com/p-2854/Capdase-Soft-Jacket2-Xpose-for-Samsung-Galaxy-R(Solid-Black).html
Happy shopping
Sent from my GT-I9103 using xda premium
Hey Hapticc. How long does it take to be delivered?
These are products that I bought for my galaxy r. dealxttreme all of them, at very good prices.
If someone need an opinion, just ask me.
http://www.dealextreme.com/p/eu-plug-battery-charger-for-samsung-i9100-galaxy-s2-100-240v-73362
http://www.dealextreme.com/p/sports-gym-arm-band-case-for-samsung-i9100-galaxy-s2-black-orange-67120
http://www.dealextreme.com/p/replac...sung-i9100-i9101-i9103-i9108-galaxy-s2-105150
http://www.dealextreme.com/p/replacement-3-7v-1800mah-battery-for-samsung-i9100-galaxy-s2-91183
http://www.dealextreme.com/p/protec...or-samsung-i9100-galaxy-s2-5-piece-pack-82873
http://www.dealextreme.com/p/univer...ive-screen-stylus-pen-with-strap-silver-56547
http://www.dealextreme.com/p/protective-tpu-s-back-case-cover-for-samsung-galaxy-z-i9103-black-92270
http://www.dealextreme.com/p/protective-tpu-s-back-case-cover-for-samsung-galaxy-z-i9103-white-92266
http://www.dealextreme.com/p/protective-tpu-s-back-case-cover-for-samsung-galaxy-z-i9103-grey-92268
jose_ma294 said:
These are products that I bought for my galaxy r. dealxttreme all of them, at very good prices.
If someone need an opinion, just ask me.[/url]
Click to expand...
Click to collapse
Hi! 10 days ago I ordered in dealextreme:
- The external battery charger.
- The 1800mA battery. The 1650mA you posted looks awful.
- One black and one white protective cover like yours
- Another kind of back protective cover with an stylus pen (look for "Protective PC Back Case for Samsung Galaxy Z i9103 - Dark Red"for 2,90$ )
- A sports band with an stylus (look for "Sports Gym Arm Band Case w/ Stylus for Samsung i9100 Galaxy S2" for 3.90$). I think your band looks better but this one is cheapper and goes with the stylus
- the BH-214 Designer's Bluetooth Stereo Handsfree Set (nokia copy).
I think the protective back red case would be the best if it fits well. It looks thin, light and gives you free access to the microusb and 3.5mm jack plugs.
My question is about the battery charger. How many time you need to charge the 1800mA and the original 1650mA bateries? More, or less than with the phone charger?
I got a case for 200 Rs. from a local shop here in Chennai , India . It looks nice , Its printed 'MY CASE' for I9103 in the cover . It fits perfectly.
AbShake96 said:
Hey Hapticc. How long does it take to be delivered?
Click to expand...
Click to collapse
Mine didnt came till now what a ****ty service :-(
Sent from my GT-I9103 using xda premium
shankarcps said:
I got a case for 200 Rs. from a local shop here in Chennai , India . It looks nice , Its printed 'MY CASE' for I9103 in the cover . It fits perfectly.
Click to expand...
Click to collapse
Can u post screenshot pls
Sent from my GT-I9103 using xda premium
http://tpu-cases.com/index.php?main_page=product_info&cPath=46_76&products_id=306
Also comes in white for now
Here it is
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
The plastic is very very very smooth like butter, but has friction between hard surfaces..so if you stick the phone in your hand with the case on itll slide if you move your hand back & forth..the edge of the case barely covers the phones curved glass, Im guessing to put it in and tale it out, has no play,and just seems like a good ol' hardcase
The more i handle it,the plastic should get grippier, ill update on that
No snap,crackle,pop noises from this case, put it on and done
+1 to a simple case, as my first case for the phone its clean&simple
Looks like the sides come up farther than on the ringke case. But looks good otherwise.
-EP
Just got the same case last night. I HATE using cases but this one is really nice. I would absolutely recommend one. Fits like a glove and feels great. It doesn't attract lint like some plastic cases.
Sent from my Nexus 4 using xda app-developers app
OP, could you please provide links, price and color options if possible thanks
Thanks for the pics. How easy is it to get on and off?
galaxys said:
Thanks for the pics. How easy is it to get on and off?
Click to expand...
Click to collapse
No problem taking it off, easy
Ordered mine just waiting is the edges pretty sharp??
ssnr said:
Ordered mine just waiting is the edges pretty sharp??
Click to expand...
Click to collapse
...no,
Add another thumbs up to the Diztronic. My first case from them I, that I decided to get based on comments here. So far the best case I've seen for the Nexus 4 (at least until a decent 2-component case like the Otterbox Commuter etc. comes along).
Nexus 4 Diztronic Hardshell Case Review
$9.99- Amazon Link
$9.99- Diztronic Link
Design
5/5
First of all, this case is EXTREMELY thin. It's only 1mm thin, making it 25% thinner than the original TPU case. The back has a non glossy Diztronic logo on it and a slot cut open for the camera and speakers. It is a bit slippery, but won't catch lint on it or attract finger prints. Unlike other shell cases, this one isn't hard to take in and out. However, you definitely want to take it out periodically to make sure debris doesn't get caught in it and scratch the case. The edges of the case just barely go over the screen making a bit of a "lip". The lip is barely there and you may be able to fit a screen protector on it. The buttons are left exposed on the case making pressing the power button and volume rockers very easy.
Protection
4/5
This case does a decent job at protecting the phone while still keeping a thin profile. The top and bottom of the case are left somewhat vulnerable, yet I understand how it would be tough to cover that part while making the case a "hardshell". Keep in mind this case is only 1mm thick, so I'm grading the protection based on the case's target audience.
Final Verdict
4.5/5
This may be the thinnest case to ever hit the market. At $9.95 you get a lot of bang for your buck; this is a high quality case made with premium materials. You can tell Diztronic took the time to make sure they got everything right. This case is so thin you won't even notice it while still giving you some protection.
Def the best case so far, for the money
Mod wanna merge this w/ my video review thread?
Nxxx said:
Mod wanna merge this w/ my video review thread?
Click to expand...
Click to collapse
Have copied your video and review post into this thread, closing your other thread as this was already available when you posted today.
Thanks
AvRS
Anybody else using it?,
Sent from my Nexus 4 using Tapatalk 2
Nxxx said:
Nexus 4 Diztronic Hardshell Case Review
Click to expand...
Click to collapse
Hi, do you happen to have the similar Rearth Ringke and Nilkin Matte Hard Cover cases? If so, comparing all 3 in detail in one video would be AWESOME and help everyone in this forum, I think...
androidfoshizzle said:
Anybody else using it?,
Sent from my Nexus 4 using Tapatalk 2
Click to expand...
Click to collapse
Yep I am using it with a Seidio Surface holster. Looks and feels great! Aside from the speaker alignment, it's my fav case. It actually took me away from the official bumper because now I get a holster which has a smaller footprint when on my belt lol.
Mods should combine all diztronic related threads,.. TOO MANY OF THE SAME TOPICS
Sent from my Nexus 4 using Tapatalk 2
:beer:
Sent from my Nexus 4 using Tapatalk 2
Hi,all
I'd been searching for some times about cases that fits dock. I finally got one a week ago so I will share my experience about it.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
At first glance: The case is very slim. When you snapped in the case, it is not obviously noticeable. If you really like the design of your Xperia Z, this case would maintain its beauty very well.
Docking your phone: You have to use a bit more force in order to dock since the case added a bit of thickness to your phone (just a bit more force, not really much).
Quality: Although the design is great, the quality does not follow. The backplate is not really flat, some areas pop out so you can feel that you device is partially curvy. The material looks fine but the strength is not so good. After using the case together with the dock for a week, all corners of the case are cracked (but the shape is still maintained)
Summary
Pros: thin, barely noticeable
Cons: curvy back, easily cracked
Great review! Question where can i get this? Thanks!
It seems fine, the only dockable case I've seen till now.
I've googled it and found it but it's over 20$ + shipping. It's a big expensive from my point of view for being. I've seen it at 27$ that is 20-21€ shipping included in shop.brando.com
Could you please tell us where you've gotten it it and how much it has cost?
Thanks!
moryggy said:
It seems fine, the only dockable case I've seen till now.
I've googled it and found it but it's over 20$ + shipping. It's a big expensive from my point of view for being. I've seen it at 27$ that is 20-21€ shipping included in shop.brando.com
Could you please tell us where you've gotten it it and how much it has cost?
Thanks!
Click to expand...
Click to collapse
Purchased from Brando. 27$ in total (shipping to Thailand)
Is it TPU or is it hard plastic? From the pictures it seems to be the hard plastic type, aka polycarbonate.
LeeTL said:
Is it TPU or is it hard plastic? From the pictures it seems to be the hard plastic type, aka polycarbonate.
Click to expand...
Click to collapse
TPU. It's on the title
Anyone got the BLACK ?? Can share some pics of black one..
ClementNg23 said:
TPU. It's on the title
Click to expand...
Click to collapse
Oh, I can read the title too.
But if YOU read the review properly, he mentions that the disadvantage is that it can be CRACKED. I've been using TPU cases for my phones and I know if it's TPU, you can't 'crack' it.
LeeTL said:
Oh, I can read the title too.
But if YOU read the review properly, he mentions that the disadvantage is that it can be CRACKED. I've been using TPU cases for my phones and I know if it's TPU, you can't 'crack' it.
Click to expand...
Click to collapse
It's TPU but it can crack. Imagine a one time use plastic cup. It can be teared. The casr crack the same way.
romeokk said:
It's TPU but it can crack. Imagine a one time use plastic cup. It can be teared. The casr crack the same way.
Click to expand...
Click to collapse
[smartass mode ON]
You're confusing TPU with styrofoam. You can not crack TPU ("excellent mechanical properties, combined with a rubber-like elasticity", just Google it) . So this case is clearly not TPU if it can crack.
[/smartass mode OFF]
LeeTL said:
Is it TPU or is it hard plastic? From the pictures it seems to be the hard plastic type, aka polycarbonate.
Click to expand...
Click to collapse
heretic said:
[smartass mode ON]
You're confusing TPU with styrofoam. You can not crack TPU ("excellent mechanical properties, combined with a rubber-like elasticity", just Google it) . So this case is clearly not TPU if it can crack.
[/smartass mode OFF]
Click to expand...
Click to collapse
Sorry guys. I just checked with the official website trinity.jp. It is made from Polypropylene not Polyurethane (TPU) so it was my false.
TPU is a kind of plastic anyway
I was considering getting this case, the cracking issue is putting me off now.
what did you think caused the cracks?
electric0ant said:
I was considering getting this case, the cracking issue is putting me off now.
what did you think caused the cracks?
Click to expand...
Click to collapse
Couple days ago, I just break it into 2 pieces. I used another case then changed to +Simplism, right before I put on the case, I'd held the case with both of my hands then pushed the part that poped out. It then broke into 2 parts.
So I tried an experiment, I flicked a broken part with my fingers as hard as I could. The result? It cracked.
I assumed that Polypropylene that the case is made of has low elasticity.
I just ordered 2 new anyway. Ther is no choice for me. The only low-profile way to protect while docking is this case. Otherwise, you will have to buy Noreve flip case, but it is bulky.
Just fitted the black one fits nice and tight I suspect taking it off again may be a problem and with free screen protector as well not bad gives some protection the attraction is not having toll take it out to charge in the dock
Sent from my ASUS Transformer Pad TF700T using Tapatalk 2
cheltenham2004 said:
Just fitted the black one fits nice and tight
Sent from my ASUS Transformer Pad TF700T using Tapatalk 2
Click to expand...
Click to collapse
I have black one too, but i think that case is just a bit too small.
Sent from my C6603 using xda premium
I got the white one and personally, I wish I'd saved my money. I have a small air bubble across the back and I don't actually think it would protect my phone if I dropped it. Oh and it feels like your holding tissue paper.
Sent from my C6603 using xda app-developers app
d10brp said:
I got the white one and personally, I wish I'd saved my money. I have a small air bubble across the back and I don't actually think it would protect my phone if I dropped it. Oh and it feels like your holding tissue paper.
Sent from my C6603 using xda app-developers app
Click to expand...
Click to collapse
IMHO this case is made to protect phone from scratches not from damages caused by dropps
Sent from my C6603 using xda premium
anybody has try this case into a alternative chinise copy dock? the $10 dock? thank you
I would like to order this one, but I would also like to know how is with 3rd party docks. Iv'e got both models of 2rd party and I would also like to know if it is possible to order this kind of case to europe? I know it is possible to order from http://chuwajapanimports.wazala.com/, but it is really overpriced ($21 + $35 for shipping).
I've use this case for about a month, it cracked after 2 drops to smooth marble floor around 1 meter height. phone was protected from scratch.
Sent from my C6603 using xda app-developers app
So I currently use 3 cases for my S4 - looking for a final purchase of a good aluminum case
Will likely get the kommandant, red bumper and black back plate - any other suggestions? I'm look for a slim metal case NFC does not matter to me
http://www.casefanatic.com/samsung-...kommandant-samsung-galaxy-s4-metal-case-case/
WOULD LOVE to have something like the Sector 5 from element but don't see anything even close to it?
Sector 5 http://www.elementcase.com/Sector-5-iPhone-5-Case-p/api5-1020-xxxx.htm
Metal or aluminum bumpers are ur best bet.. Any metal back will interfere with ur signals.. 4g,gps,wifi etc.. Just my experience
Sent from my SAMSUNG-SGH-I337 using xda premium
looks interesting but the metal turns me off due to the signal issue possibility. I like the shape it gives the phone, but my Spigen Neo Hybrid gives my phone that shape so.......
sent from my Galaxy S4 using Tapatalk 2
I do like the neo hybrid, I was thinking about getting it but swapping out the bumper for an aluminum one.
I feel the bumper would have a similar design and would sort of fit
These are the ones i use now.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my SCH-I545 using xda app-developers app
drnob1 said:
I do like the neo hybrid, I was thinking about getting it but swapping out the bumper for an aluminum one.
I feel the bumper would have a similar design and would sort of fit
Sent from my SCH-I545 using xda app-developers app
Click to expand...
Click to collapse
if you do this, post up some pics!
sent from my Galaxy S4 using Tapatalk 2
drnob1 said:
So I currently use 3 cases for my S4 - looking for a final purchase of a good aluminum case
Will likely get the kommandant, red bumper and black back plate - any other suggestions? I'm look for a slim metal case NFC does not matter to me
http://www.casefanatic.com/samsung-...kommandant-samsung-galaxy-s4-metal-case-case/
WOULD LOVE to have something like the Sector 5 from element but don't see anything even close to it?
Sector 5 http://www.elementcase.com/Sector-5-iPhone-5-Case-p/api5-1020-xxxx.htm
Click to expand...
Click to collapse
I have to warn you, I did some research after having issues with my Element Case Eclipse, and it seems that many people who are not paid in free merch by companies to review products have reported that aluminium bumpers cause hella problems with GPS signals in particular, but also drop your bars (from 4-5 to 3-4, for example). Now, if you never use GPS (lol, who doesn't use GPS?) then maybe it doesn't matter as much, but I about threw the case out the window when I realised this $100 case (incl. tax and shipping) was breaking my GPS. Took the case off and I was good to go. Just my experience and my research. Don't be a statistic.
Also, I much preferred the Spigen Slim Armor to the Neo Hybrid. the Neo Hybrid is not comfortable and the Slim Armor looks sexier in person.
I bought a Draco aluminum bumper in black. They are pricey, but very nicely made.
Sent from my GT-I9505 converted SGH-I337
That looks pretty cool and doesn't really add any thickness...
Dumb question. .. is it cold when you touch it? I kind of like that feeling...like the cool side of the pillow
Sent from my SCH-I545 using xda app-developers app
So aluminum bumpers on the edges would also cause signal loss? I have two cruzerlite cases but I'm a case fanatic (lol) the neo hybrid is it worth the $30?
Sent from my SGH-M919 using Tapatalk 4 Beta
I haven't had any issues with signal loss on my phone. DRACO - >
http://www.dracodesigninc.com/ProductDetails.asp?ProductCode=HYDRA-BLACK
Also they now have a tempered glass screen protector!
Sent from my GT-I9505 converted SGH-I337
What about GPS reception? I use GPS a lot and can't afford to have issues with it especially since you can't easily take the case off without the tool.
highaltitude said:
I haven't had any issues with signal loss on my phone. DRACO - >
http://www.dracodesigninc.com/ProductDetails.asp?ProductCode=HYDRA-BLACK
Also they now have a tempered glass screen protector!
Sent from my GT-I9505 converted SGH-I337
Click to expand...
Click to collapse
so does the case have a cold chill to it? like colder than room temp?
drnob1 said:
so does the case have a cold chill to it? like colder than room temp?
Click to expand...
Click to collapse
hi, I have new condition black color Draco case S4 , any one from US interest ? pm
drnob1 said:
so does the case have a cold chill to it? like colder than room temp?
Click to expand...
Click to collapse
I would probably say on a whole when you dont have it in your hand and its sitting there, yes, it would be cooler than without it as the aluminum is keeping it cool. I have an app called Thermometer Plus that tells the temperature of the phone and other sensor stuff that seems pretty accurate.
I got my draco hydra case this morning. The polished one looks great on my white S4 GE. It's polished but not mirror finish so it doesn't show fingerprints like crazy and will most likely hide little surface scratches.
As draco support said it does not effect GPS or cell reception even on my sometimes weak t mobile signal. I tested it by navigating to several locations today. Since my phone is new I had been paying attention to reception a lot so I was able to keep track of this as well.
Is it worth the price....probably not but it is the only case (bumper or other) for any phone I've ever had that doesn't look cheap or scream this phone has a case on it. The curved shape also makes it easier to hold on to a very slipper phone. However the front and back is slick enough that it doesn't make it hard to slide into a pants pocket. The grippiness comes from the curved shape and the textures polycarbonate side panels.
My only major complaint is that although the front has a nice lip to protect the phone when face down the back doesn't really so it's generally sitting on the highest point of the back which is the camera. This looks nicer but is less practical from a protection standpoint. Back protection matters a little less on a phone that has a replaceable back but it would still be nice to protect the camera more.
Also I wish it didn't say ducati on it. I debated getting the cheaper airborne case which doesn't have it but I didn't like it's design as much. I am into cars and motorcycles but I don't own a ducati so it feels silly, at least its discrete and I didn't have to put the ducati sticker on the back of my phone.
i suggest this. I would get it right now if i have the $$$ lol
http://www.ebay.com/itm/26125968568...eName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649
So this threat should be dedicated for reasonable cases for our beloved phone.
I start off with this one: Zhonge Smart phone case
Link: http://www.camelwill.com/letv-leeco-le-pro-3-smart-phone-case-gold.html
Several colors: Black Gold Blue Red Rose Gold
Pic:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This is my clear favorite since I literally HATE flip cases and generally think, that cases should not kill the elegant shillouette of a phone.
So I don´t link monster security safety cases either. But that´s just me
I have found these which let you add custom images:
Cover Case
Leather Flip Case
I just ordered a case from Amazon. Will see how it preforms before I post a link to it. It looks promising.
will the cases and screen protectors for the chinese/international variant (x720) fit on the US variants (x727)?
sau41 said:
will the cases and screen protectors for the chinese/international variant (x720) fit on the US variants (x727)?
Click to expand...
Click to collapse
I bought cases for the Chinese model, and I am quite positive it will for US version.
i search flip case, someone have one ?
tristabeau said:
i search flip case, someone have one ?
Click to expand...
Click to collapse
I ordered this one Flip Leather Case, but when i ordered it come from China (available in EU warehouse now) and is stil in transit.
Is there a flip case that has a magnet inside and smart sleep function? To turn on and of the phone when it flips? I didn't find on ebay.
Curious if anyone got one of these cases
http://www.ebay.com/itm/Plating-Fra...hash=item568f8278a2:m:migYANpIiKR8KZCvWaPtrCg
or
http://www.ebay.com/itm/Luxury-Eleg...hash=item3acf11a7aa:m:me0HWhqepv05wEbCgwB1IiQ
or
http://www.ebay.com/itm/MOFI-Vintag...hash=item3ad0890512:m:m6yDNYXdvAB-dxKqYtzykfA
Sandstone Case
I got this one from eBay. Copies the sandstone finish from OnePlus. The ring stand can be removed.
Item number: 291908663865(Can't post links yet)
I wanted one like the caselogic I have for my Note 4 but could not find. This one at least sort of "looked" the same. But it doesn't lol. the side gold color is silly and ugly but it is $5 and delivered from USA. So its a cheap much better solution till I can find what I want/need
PS: caselogic for note 4 is beter cause it has hard case on the side. this Chinese doesn't (it just changed the side color.
http://www.ebay.com/itm/13200510908...49&var=431352460498&ssPageName=STRK:MEBIDX:IT
good things about the case:
1. protects well the screen
2. using the fingerprint almost makes me feel that this case is a must. it fits my finger so perfectly that I have no miss reading it
3. because the side part is much stronger than the original case I don't accidently turn off the screen anymore when I rotate the phone
overall: not pretty but very functional case
daweeze02 said:
Curious if anyone got one of these cases
Plating-Frame-Soft-TPU-Litchi-Leather-Back-Case-Cover-For-Letv-LeEco-Le-Pro-3-/371774879906?var=&hash=item568f8278a2:m:migYANpIiKR8KZCvWaPtrCg
or
Luxury-Elegant-Stand-Flip-Leather-Cover-Case-For-Letv-LeEco-Le-Pro-3-5-5-inch-/252582143914?var=&hash=item3acf11a7aa:m:me0HWhqepv05wEbCgwB1IiQ
or
MOFI-Vintage-Retro-Leather-Hard-Cover-Case-For-Letv-LeEco-Le-Pro-3-5-5-inch-/252606743826?var=&hash=item3ad0890512:m:m6yDNYXdvAB-dxKqYtzykfA
Click to expand...
Click to collapse
I got the black leather case from the first link you posted from amazon... got it to hide the almost-rose-gold phone body color that was the only option to purchase during the 'lightning deals'. It fits really well, added grip on the sides, the fake leather backing gives it a nice texture but very plastic-y, doesn't overheat, overall it offers very little protection on the corners and the front glass is protected by the border of the case but only minimally. Hope this helps.
the leather is not even close to be leather. it is plastic imitating leather. The caselogic is way much better texture. My hope is that as the phone gets more popular a company like caselogic decides to build a case for. But ... it is only $5 and way much better than the one that comes with it.
I do like that i have to actually put some pressure to click in the buttons. this way, i never accidentally click on anything. And i never missed a fingerprint reading since i changed to this case. Link i gave is the same one, but delivers fast from usa.
if anyone find one that is real leather and not plastic in the sides please let me know.
this is what i want:
Bought this case https://www.amazon.com/gp/product/B01N8Y8WUD/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
Fits exactly as it should, slightly thicker than the stock case so the camera is _slightly_ more protected. Also has the thicker bumpers on the edges in the same material as the rest of the case. Not incredibly shock-proof but it fits the phone very well, looks nice, and when paired with the full-front Toshion screen protector it is very classy IMO. Pictures to come later when I get home!
xerythul said:
Bought this case https://www.amazon.com/gp/product/B01N8Y8WUD/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
Fits exactly as it should, slightly thicker than the stock case so the camera is _slightly_ more protected. Also has the thicker bumpers on the edges in the same material as the rest of the case. Not incredibly shock-proof but it fits the phone very well, looks nice, and when paired with the full-front Toshion screen protector it is very classy IMO. Pictures to come later when I get home!
Click to expand...
Click to collapse
As promised some photos of the case next to the stock case, and on the phone itself. Sorry for the potato quality, took the photos with my old Zenfone 2.
xerythul said:
Bought this case https://www.amazon.com/gp/product/B01N8Y8WUD/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
Fits exactly as it should, slightly thicker than the stock case so the camera is _slightly_ more protected. Also has the thicker bumpers on the edges in the same material as the rest of the case. Not incredibly shock-proof but it fits the phone very well, looks nice, and when paired with the full-front Toshion screen protector it is very classy IMO. Pictures to come later when I get home!
Click to expand...
Click to collapse
Which screen protection are you talking about?
aaalexx said:
Which screen protection are you talking about?
Click to expand...
Click to collapse
The thread right below this has a reply by me including a link and pictures.
xerythul said:
The thread right below this has a reply by me including a link and pictures.
Click to expand...
Click to collapse
Just seen it, thank's
aaalexx said:
Just seen it, thank's
Click to expand...
Click to collapse
No problem. If you have any questions or want to see a picture from a specific angle let me know and I'll do.my best to accommodate.
Thanks for the info! I will get my case in a couple of days and of course will share some photos