Database Info

[HELP] ICS - WiFi Problem on any rom [HELP]

I have Nexus S with Baseband I9034XXKB1
Everyone tells tht WiFi is working but I can not achieve this results
Please provide more detailed information about this problem, DEVS-please help me and other users to get wifi working

Wrong forum dude there is a q&a forum for stuff like this...this forum is for development not seeking help. First try searching, also if you wipe everything you shouldn't have a problem. I don't have a solution for you otherwise I'd tell you.
Sent from my Nexus S using xda premium

It's a long shot, but could this be a radio problem?
Try to figure out if the users with WiFi issue share the same radio.
Greetz

Wait for offical ICS, I read it will be released till end of this week

Serris said:
Wait for offical ICS, I read it will be released till end of this week
Click to expand...
Click to collapse
you have a source?

Deivius, suggest you to install stock 2.3.6 and then flash ICS.

TRIUMF said:
Deivius, suggest you to install stock 2.3.6 and then flash ICS.
Click to expand...
Click to collapse
I will try this one method....
And how do you think Wipe is needed before flashing ICS?

devius said:
I will try this one method....
And how do you think Wipe is needed before flashing ICS?
Click to expand...
Click to collapse
I have tried to flash Stock rom and than install ICS but no value, maybe I should wait for official ICS and then CM9 :-(

[Q] Atrix 2 Manually Deodex

Greetings to all!!
Am a happy mexican user of an Atrix 2... I was wondering if anyone has succesfully deodexed this phone???
I was reading this post:
http://forum.xda-developers.com/showthread.php?t=1362022
But, I don't want brick my phone... again... and I want to do it manually, not installing a deodex room using CM... why?? Because I like to learn new stuffs.
Hope someone can help!
Atrix 2 Stock 2.3.6 already rooted.
Thnx !!

serch_mx said:
Greetings to all!!
Am a happy mexican user of an Atrix 2... I was wondering if anyone has succesfully deodexed this phone???
I was reading this post:
http://forum.xda-developers.com/showthread.php?t=1362022
But, I don't want brick my phone... again... and I want to do it manually, not installing a deodex room using CM... why?? Because I like to learn new stuffs.
Hope someone can help!
Atrix 2 Stock 2.3.6 already rooted.
Thnx !!
Click to expand...
Click to collapse
Welcome to our happy, growing family!
Not to sound rude or anything, but you did notice the stock deodexed rom in the dev section? And the multiple deodexed roms currently available for the A2? So, yea, it has been done.. and can be done by anyone with the resourcefulness required.
In fact, just finished deodexing the stock framework files myself.. (i'm starting fresh from my wife's stock 2.3.6 )... so, yup.. you, too can do it.
P.S. The latest version of xUltimate actually let's you do it without connecting your phone via usb..
Feel free to PM me if you want some specifics of how i make it work..
Sent from my mind using XDA

alteredlikeness said:
In fact, just finished deodexing the stock framework files myself.. (i'm starting fresh from my wife's stock 2.3.6 )... so, yup.. you, too can do it.
P.S. The latest version of xUltimate actually let's you do it without connecting your phone via usb..
Feel free to PM me if you want some specifics of how i make it work..
Sent from my mind using XDA
Click to expand...
Click to collapse
Thnx a lot!! Yep, I know that is a CMW Backup deodexed, but like you, I wanna do it my self. And for the modded roms, I tried Supercharger for like a month, but my phone was to hot (literally, the CPU was working always at 50% load) and had to recharge the battery twice a day... so I decide back to stock rom and make some tweaks my self.
So, I'll give a try soon, if I need help, I'll be pm u
Greetigns!!

serch_mx said:
Thnx a lot!! Yep, I know that is a CMW Backup deodexed, but like you, I wanna do it my self. And for the modded roms, I tried Supercharger for like a month, but my phone was to hot (literally, the CPU was working always at 50% load) and had to recharge the battery twice a day... so I decide back to stock rom and make some tweaks my self.
So, I'll give a try soon, if I need help, I'll be pm u
Greetigns!!
Click to expand...
Click to collapse
I'm just throwing this out there for you but victory rom is a good one to try. It runs extremely well and the battery life is good.
Sent from my SGH-I997 using xda premium

[Q] SuperCharger v6 - How to make it 100% supercharged?

does anyone who owns SL here and using it (v6) know how to make it to 100% supercharged? i only can get it to 50%....

You need to install new version of service.jar or something. Jellybean's version requires some manual work, either using PC or somewhat. You need to read the original thread thoroughly.
Sent from my GT-I9003 using xda app-developers app

thank you kawan..

What are u running on ur phone .. gb, ics or jb ... depends on that .. anyway if u r using ics I'll attach the services.jar .. u can use it ..

imjustafq said:
thank you kawan..
Click to expand...
Click to collapse
just realised we're KAWANs! Hey I didn't know that there is an existing Malaysian who still uses Galaxy SL
Back to topic: If you're on JB, it will be more difficult; from what I remember you need to patch the service.jar, and copy some other files to make it work.
With all that... I succeeded once and then gave up because I flash new roms too often LOL.
But I do have the patched JB service.jar if you want.

cheeyeen said:
just realised we're KAWANs! Hey I didn't know that there is an existing Malaysian who still uses Galaxy SL
Back to topic: If you're on JB, it will be more difficult; from what I remember you need to patch the service.jar, and copy some other files to make it work.
With all that... I succeeded once and then gave up because I flash new roms too often LOL.
But I do have the patched JB service.jar if you want.
Click to expand...
Click to collapse
haha.. there is.. and i'm one of them..
okay, that's the part where i got dizzy a little, i don't know how to patch the service jar.. i'm worried if i did the thing wrong and screwed up my phone.. i'm also always switch swapping between roms.. don't know why.. like a flashing syndrom like that.. huh..
anyways.. share it if you don't mind.. that would be great for me and THANKS a lot KAWAN >.< ...
ivAnash said:
What are u running on ur phone .. gb, ics or jb ... depends on that .. anyway if u r using ics I'll attach the services.jar .. u can use it ..
Click to expand...
Click to collapse
hye there........ i'm using JB.. and sometimes flashing back to GB if i get bored. but i use JB roms more often.. =)
but if you still can share the ics patch.. i don't mind. maybe i'll use it someday.. who knows.. thanks!

[REQ] Stock 4.2.2 SystemUI.apk

Hey guys, I'm new here
Recently i've posted the same request but i was in wrong section.
Alright, so I need the original 4.2.2 SystemUI.apk because I was modify it without backing it up and now it crashes:crying:
Yeah I knew that was so dumb so I need it in order to use my phone normally.
Thankyou

denyndra said:
Hey guys, I'm new here
Recently i've posted the same request but i was in wrong section.
Alright, so I need the original 4.2.2 SystemUI.apk because I was modify it without backing it up and now it crashes:crying:
Yeah I knew that was so dumb so I need it in order to use my phone normally.
Thankyou
Click to expand...
Click to collapse
I'm guessing you have a custom recovery and are rooted? would it not be easier to flash a new rom from the threads on here??? (http://forum.xda-developers.com/showthread.php?t=2575766 the deox one for example) i know its 4.3 but its the latest android version for your mini.
i could be wrong but just a thought.

Maybe you could match it with your software version from the roms available in stock roms section, and pull the file from the zip? Check which "rom version" your using from settings>about>software information.
I'm guessing you are running stock?
Sent from my HTC One using Xparent Green Tapatalk 2

Braddison said:
I'm guessing you have a custom recovery and are rooted? would it not be easier to flash a new rom from the threads on here??? (http://forum.xda-developers.com/showthread.php?t=2575766 the deox one for example) i know its 4.3 but its the latest android version for your mini.
i could be wrong but just a thought.
Click to expand...
Click to collapse
Yeah, I'm thinking the same thing
but i think i will go for magiorom.. for more customizable rom.
still waiting the systemui till tomorrow before trying magiorom/stock4.3
RuffBuster said:
Maybe you could match it with your software version from the roms available in stock roms section, and pull the file from the zip? Check which "rom version" your using from settings>about>software information.
I'm guessing you are running stock?
Sent from my HTC One using Xparent Green Tapatalk 2
Click to expand...
Click to collapse
Yeah stock 4.2.2
Thanks! never thought about the pulling stuff. Gonna try it.
=============================================================================================
Edit:
Couldn't found stock rom, and there is deodex rom with 1.2gb file wich is too big
If anyone can pull with adb and upload it, that would help me!

Update:
Pull and push apk from deodexed 4.3 doesn't work
Decided to flash new rom..
Now I don't need the apk anymore.. Thanks for everyone that tried to give solution.. Thanks XDA..:good:

[Solved] Is it safe to update Atrix 2 (Asia version) to Jelly Bean

Hello Experts,
This is sktneer from India. I am Forum Guru in reputed ExcelForum (excelforumdotcom).
But I do not know anything about the back end applications used in phones except the basic functionality of my phone, currently using Motorola Atrix 2 MB865 (Asia version).
I would request you experts to guide and assist me to resolve the issues I am having with my phone.
My phone is very slow and I have tried almost all the methods I found over internet to get rid of this but all my efforts have gone in vain.
Recently over internet I found that some users having the same problem claimed that their issue was resolved by updating their Atrix 2 to Jelly Bean with unofficial leak 3.
To be very frank, this was completely new thing to me and I was not even aware of the terminology used in this scenario.
My Questions:
1) Is rooting is required for this kind of updaing? If yes, please guide me that how can I root my device?
2) What are the correct steps for updating my device with such leaks? Because when I googled this I just found few links for downloading but as I told you that I am completely novice and not familiar with the terminology used, so couldn't get the correct steps to be followed.
3) My last question is, is it possible to install ICS back if I face issues with JB on my device?
I know that I have asked too much and certainly you experts don't expect a complete novice in the forum but I hope that you will bear with me.
Any help would be greatly appreciated.

sktneer said:
Hello ......
Any help would be greatly appreciated.
Click to expand...
Click to collapse
It is absolutely safe to install jb leak on Indian atrix 2 (I am using the same on my phone)
Rooting is not required for this process.
Use this link for complete procedure
and this is the link for downloading jb leak 3
Use the jb leak 3 instead of stock rom (leak) that is given in that procedure

sameerm02 said:
It is absolutely safe to install jb leak on Indian atrix 2 (I am using the same on my phone)
Rooting is not required for this process.
Use this link for complete procedure
and this is the link for downloading jb leak 3
Use the jb leak 3 instead of stock rom (leak) that is given in that procedure
Click to expand...
Click to collapse
Thanks Sameer!
I really appreciate your help.
I visited the link you provided and one thing is not clear to me. Would you please guide me that how to follow that......
In the link OP stated something like this....
"Once the whole process is over, you'll get a little sign saying that it passed. This means that your ROM has been flashed. Note- do NOT remove your phone/ let your phone or computer switch off. You do not want to go there. Make sure everything has enough charge.
Now... This step is very important... Reeboot your phone and..... You're done! That's it! Your phone now runs official(kinda) Jelly Bean(4.1)!"
Does this mean that when the process of updating is finished, the phone will be switched off automatically and I will have to reboot the phone when it is still connected to the pc as I normally switch on my phone by pressing the power button?
I am sorry if I have asked something silly but I need your guidance.

Hi Sameer,
One more query. Do I need to remove my memory card and SIM before updating also?
Thanks.

Reporting back the progress:
So finally I have updated my device successfully and noticed some changes and I will need your approval whether these changes are normal or if not, how to correct them.
1) The model number of the phone is showing ME865 now instead of MB865 (my old mode before update). Is this correct?
2) The new android version is 4.1.2. Is this the correct version which belongs to leak3?
3) When I called first after updating, the call was not connected and I got a Chinese voice message.
4) I can still see Chinese language here and there, though I changed it to English.
Please let me know if I have done it correctly or do I need to follow some more steps to completely make it to function properly?
Somebody please reply.

All is correct, no Worries,

sameerm02 said:
All is correct, no Worries,
Click to expand...
Click to collapse
Thanks Sameer. You helped me a lot. I really appreciate that.
I have few more questions for you, please reply if you can....
1) The latest version of Jelly Bean is 4.3. So is it possible to update to the latest version?
2) Can I re-install the JB update using the same method again, if any issue with the device?
3) If I factory reset the device, will the android version be changed to ICS again?
Sorry for bothering you.
Thanks again for all your support.

1.Yes it is!
2. Yes you can!
3. No. Your phone will only stay at the rom you flashed.
Sent from my MB865 using XDA Free mobile app

Ricokowalski said:
1.Yes it is!
2. Yes you can!
3. No. Your phone will only stay at the rom you flashed.
Sent from my MB865 using XDA Free mobile app
Click to expand...
Click to collapse
Thank you so much for your reply.
If you have any link with clear instructions for how to update to 4.3, please share that link with me.
Thanks again.

In fact i have never flashed 4.3 before. But i had 4.2 & kk roms flashed succesfully, and i'm using KK(cm11) right now. You can search the Atrix2 Android Development section for some threads of instructions on how to flash a 4.3 rom.
Sent from my MB865 using XDA Free mobile app

Ricokowalski said:
In fact i have never flashed 4.3 before. But i had 4.2 & kk roms flashed succesfully, and i'm using KK(cm11) right now. You can search the Atrix2 Android Development section for some threads of instructions on how to flash a 4.3 rom.
Sent from my MB865 using XDA Free mobile app
Click to expand...
Click to collapse
Hi Ricokowalski,
Nothing is better if there is any possibility of using KK.
Do you have any link with clear instructions to a beginner for how to do that, keeping in mind that I have already used JB leak 3 using RSD Lite? I will appreciate any help in this regards.
Moreover why I see this line in your message "Sent from my MB865 using XDA Free mobile app" because after updating my device shows ME865 instead of MB865 but yours is still showing MB865?
Thanks once again for your reply.

Firstly you need to get your phone rooted. Then you have to install a cunstom recovery. Most roms support the BMM(Boot Menu Manager) custom recovery. You can also install multiple Roms by BMM.
If the BMM runs normally on yoir phone, i think it is possible to flash roms.
You can access the BMM instructions here↓
http://forum.xda-developers.com/showthread.php?p=49231803
I think that should be enough for a beginner to use BMM fluently.
And about the device name, i think it is because the build.prop file changed because of the JB leak you flashed. So your device name is changed too.
However i have noticed that some Roms had stated that people should flash them on stock ICS rom and i wonder if it is also safe to flash on JB leak. Afterall, it is dangerous to flash a custom rom.
Sent from my MB865 using XDA Free mobile app

Ricokowalski said:
However i have noticed that some Roms had stated that people should flash them on stock ICS rom and i wonder if it is also safe to flash on JB leak. Afterall, it is dangerous to flash a custom rom.
Sent from my MB865 using XDA Free mobile app
Click to expand...
Click to collapse
That some roms are, non kexec 4.2.2 roms only !! (These non kexec rom needs stock ICS rom as ur primary rom)
All kitkat roms are kexec roms which can be flashed with BMM whether you have jb leak installed or stock ICS installed as ur primary ROM (system 1)
And its not dangerous to flash a custom rom

sameerm02 said:
That some roms are, non kexec 4.2.2 roms only !! (These non kexec rom needs stock ICS rom as ur primary rom)
All kitkat roms are kexec roms which can be flashed with BMM whether you have jb leak installed or stock ICS installed as ur primary ROM (system 1)
And its not dangerous to flash a custom rom
Click to expand...
Click to collapse
Nice to see your reply Sameer.
I updated to the JB leak3 with the help of the link you provided and I really appreciate your help since a beginner like me could update using RSD Lite and the leak file without knowing abcd of the whole story.
I would really appreciate if you can provide any further assistance in order to update to kitkat using RSD Lite since I am aware of the process of update using this method.
So can I do the same to update to kitkat using the same method?
If so, can you please assist me in doing so.
As you know my device is now on JB leak 3, will I be able to continue from here to kitkat?
Any further help would be greatly appreciated.
Thanks.

sktneer said:
Any further help would be greatly appreciated.
Thanks.
Click to expand...
Click to collapse
I am not being rude, But before creating any new thread, please read other threads !!
There are so many similar threads about this !!
Please refer them
BMM help video tutorial

sameerm02 said:
I am not being rude, But before creating any new thread, please read other threads !!
There are so many similar threads about this !!
Please refer them
BMM help video tutorial
Click to expand...
Click to collapse
No Sameer. Probably you mistaken me. I know that there might be threads addressing the same issue, but being a novice I cannot decide myself that which one to follow and that's why I requested you to help me to decide about the right method since I trust you. As I am not still clear that is installing BMM necessary for updating to kitkat or can't it be done using RSD Lite as I previously did with JB leak 3?
And don't worry, you are not being rude at all as I can understand this because I am also a forum guru and I know the feeling when OP asks more and then either I don't have time to reply or I am not willing to reply. So never mind. I will try and see if I can find something useful myself.
Thanks for all your support so far. :good:
Take Care.

Get it！ Thanks for your correction
Sent from my MB865 using XDA Free mobile app

What correction?