Database Info

[Q] Help Plzzzz...Facing a big issue ** battery draiining***

Hii To All..My battery is draining very fast since last few days...my mobile is going shutdown at almost 70 to 80% battery...and when i m connecting my charger it sttarts chargin from 70 to 80%..within 5 to 10 minits it become fully charged and when i dtarts using it is shutting down within 10 mins at 70 %battery
crntly i m using kisadworx 2.0 froyo rom with fugumod
but i know it is not a problem of rom bcoz same thing happening on all the rom including dtock froyo
****one imptortant thing *****It iz happening when i install cm7 alpha8.3 cwm zip by mistake in recovery when i was on stock froyo..
The rom was install but it leaves this issue
Help me plz....Thanx in advance

mohdwaqar said:
Hii To All..My battery is draining very fast since last few days...my mobile is going shutdown at almost 70 to 80% battery...and when i m connecting my charger it sttarts chargin from 70 to 80%..within 5 to 10 minits it become fully charged and when i dtarts using it is shutting down within 10 mins at 70 %battery
crntly i m using kisadworx 2.0 froyo rom with fugumod
but i know it is not a problem of rom bcoz same thing happening on all the rom including dtock froyo
****one imptortant thing *****It iz happening when i install cm7 alpha8.3 cwm zip by mistake in recovery when i was on stock froyo..
The rom was install but it leaves this issue
Help me plz....Thanx in advance
Click to expand...
Click to collapse
Flash stock rom in odin and if you still got this isue buy a new battery
Sent from my GT-I5800 using xda app-developers app

turboblaz said:
Flash stock rom in odin and if you still got this isue buy a new battery
Sent from my GT-I5800 using xda app-developers app
Click to expand...
Click to collapse
I already tried the same

turboblaz said:
Flash stock rom in odin and if you still got this isue buy a new battery
Sent from my GT-I5800 using xda app-developers app
Click to expand...
Click to collapse
Already tried the same

mohdwaqar said:
Already tried the same
Click to expand...
Click to collapse
You mean bought a new battery ?

Get a new battery ;before try to recalibrate ur old battery.. i hope problem would be there
Sent from my GT-I5800 using xda premium

[Q] Is it possible to change the baseband firmware

Hello,
Recently I've been facing SOD on my Tab, and I read somewhere here on xda, that it's sometimes a modem problem.
So I was thinking of changing the modem/baseband firmware only.
Is that possible and how?
I know officially there is only ICS for the Tab, and I'm currently running PA v2.50; JB.
Thanks all!
//M

Bump..
Sent from my GT-P6800 using xda app-developers app

Well, i dont know which version of the tab you have (p6810 ? p6800 ?)
There is a thread discussiong wifi-dropping problems including possible solutions to flash another roms baseband if I understand it right. You might thus have a look at this thread: http://forum.xda-developers.com/showthread.php?t=1754937

Sorry forgot to mention it's a P6800. Well, I'm not having issues with my WiFi dropping, I'm having sleep of deaths. Meaning the Tab would sleep and pushing the power button will not wake it up, I have to hold the power button for 10 seconds to force a reboot.
Sent from my GT-P6800 using xda app-developers app

sergani said:
Sorry forgot to mention it's a P6800. Well, I'm not having issues with my WiFi dropping, I'm having sleep of deaths. Meaning the Tab would sleep and pushing the power button will not wake it up, I have to hold the power button for 10 seconds to force a reboot.
Sent from my GT-P6800 using xda app-developers app
Click to expand...
Click to collapse
Kernel issue ?

UpInTheAir said:
Kernel issue ?
Click to expand...
Click to collapse
Well, maybe... I don't know
Any help? Problem is that I'm facing the same problem since stock ICS, and already tried a few custom ROMs, ending up with JellyBean now.
One thing to note is that I could limit down the rate of SOD's when I turn auto-brightness off before getting the device to sleep.

sergani said:
Well, maybe... I don't know
Any help? Problem is that I'm facing the same problem since stock ICS, and already tried a few custom ROMs, ending up with JellyBean now.
One thing to note is that I could limit down the rate of SOD's when I turn auto-brightness off before getting the device to sleep.
Click to expand...
Click to collapse
Maybe try a custom kernel and governor (Pegasus) or stock kernel and with app such as Voltage Control to change governor.
Sent from my GT-I9300 using xda premium

UpInTheAir said:
Maybe try a custom kernel and governor (Pegasus) or stock kernel and with app such as Voltage Control to change governor.
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
Hello,
I really appreciate the time you're taking to help with my problem - can you help though with more details?
I mean, I'm running Androguide's Paranoid Android v2.5, is it possible to flash custom Kernels? Or do I have to get another custom ROM?
I'm basically missing the bigger picture you know
Detailed help is very highly appreciated
Thanks
//M

Any ideas?
Sent from my GT-N7000 using xda app-developers app

Your problem can have a multitude of causes.
However to answer your initial question :
You can fash whatever baseband you like using PC or Mobile odin.
Just download and flash an apropriate modem.bin for your P6800
I would start by fladhing stock HC rom and then see if the problem persists on HC.
Oh and while you are rooted (i suppose), download the emmc brick bug test app from playstore to check your internal memory.

FYR. the baseband is the modem.bin inside the stock rom.
It can be replaced to your p6800 via Odin or Mobile Odin. I have extracted a few modem from different stock roms. P6800XXLA1, P6800XXPLA3, P6800XXPLW and P6800DXLP7. send me your e-mail if you want them.
For the Paranoid rom, I'm using my own build of v2.55, wifi and gps(I got 9 sat.) works fine for my p6800.
I think Androguide's 2.55 will come soon and solve you problem.

Thanks all for your input .. I've flashed another modem.bin and haven't faced SOD's.
Note however that I turn Auto brightness and WiFi off every time I let the Tab go to sleep.
I'll wait for PA 2.55 and see how things go.

daniel_hk said:
FYR. the baseband is the modem.bin inside the stock rom.
It can be replaced to your p6800 via Odin or Mobile Odin. I have extracted a few modem from different stock roms. P6800XXLA1, P6800XXPLA3, P6800XXPLW and P6800DXLP7. send me your e-mail if you want them.
For the Paranoid rom, I'm using my own build of v2.55, wifi and gps(I got 9 sat.) works fine for my p6800.
I think Androguide's 2.55 will come soon and solve you problem.
Click to expand...
Click to collapse
Hi,
Can you share your own build v2.55 ROM with us ?
Is there any bug ?

he's already posted it on other thread yesterday as i request the firmware... here's the link...
http://kuai.xunlei.com/d/MTWGAHYFVZHI

sas_sas said:
Hi,
Can you share your own build v2.55 ROM with us ?
Is there any bug ?
Click to expand...
Click to collapse
In case someone have trouble with xunlei. There are two more links for my rom:
https://skydrive.live.com/redir?resi...GUN2PFFXUWO7ig
http://pan.baidu.com/share/link?shar...&uk=1512265283
I use only Tablet mode and very occasonially the status bar will restart itself. I don't know if there are any other bugs but it works fine for me.
Goodluck!

also another link here.... using it without a problem... thanks to daniel_hk
http://www.mediafire.com/?cwv4z67n7ilf9rn

Thanks guys.
Should I download and flash through CWM without any wipes?
Sent from my GT-N7000 using xda app-developers app

sergani said:
Thanks guys.
Should I download and flash through CWM without any wipes?
Sent from my GT-N7000 using xda app-developers app
Click to expand...
Click to collapse
if you are coming from pa 2.5 no need to wipe... just flash it with cwm

Got a symlinks error, saying that some symlinks can not be found...

edan1979 said:
also another link here.... using it without a problem... thanks to daniel_hk
http://www.mediafire.com/?cwv4z67n7ilf9rn
Click to expand...
Click to collapse
Got a symlinks error, saying that some symlinks can not be found...
Any thoughts?

[Q] Offline Charging

anyone have problem with offline charging in Cm9 and cm10 by sakindia123????

ngoralph said:
anyone have problem with offline charging in Cm9 and cm10 by sakindia123????
Click to expand...
Click to collapse
What u mean by offline charging?
Sent from my HTC Explorer A310e using xda premium

hsn97 said:
What u mean by offline charging?
Sent from my HTC Explorer A310e using xda premium
Click to expand...
Click to collapse
charging on the plug while the phone is turned off

ngoralph said:
charging on the plug while the phone is turned off
Click to expand...
Click to collapse
So whats the problem you are having?

Yes there have been some problems of certain builds booting into recovery ... during charging when the phone is OFF.
However this is a regular problem as the phone actually does go into recovery when it charges even on the stock ROM. I think you should pm the ROM cook for the hotfix/ fix.
Hit thanks if I helped !

akshat.shenoy said:
Yes there have been some problems of certain builds booting into recovery ... during charging when the phone is OFF.
However this is a regular problem as the phone actually does go into recovery when it charges even on the stock ROM. I think you should pm the ROM cook for the hotfix/ fix.
Hit thanks if I helped !
Click to expand...
Click to collapse
You must be using TWRP Recovery
It happens in TWRP

Gaurav619 said:
You must be using TWRP Recovery
It happens in TWRP
Click to expand...
Click to collapse
im using cwm i think its really a bug

Nope.. Happens in CWM too.. I flashed TWRP with the hope of removing this error... But still persists. Its a Kernel issue.. Is what I am guessing..and it happens only when the USB cable is connected to the adapter not to a computer..

better flash with the yannou's90 recovery

Using CM9.1 build #9 by sakindia123. Charging while switched off works perfect.
Btw i use the recovery provided here: http://forum.xda-developers.com/showthread.php?t=1415223
It takes around a 30 to 40 seconds to show the charging graphic, but it does charge.

[Q] Best rom for O3D?

Hello. I would Like to know which is the best ROM for O3D. with good battery life , working camera,3D support and less bugs it have its better. I tried NovAndroid It was really fast but The battery discharged in 2-4 hours. Then I tried the CM 7 but it was even worse then NovAndroid and then CM 10 nightly which had too much bugs. Right now Im using JB 4.1.0 but camera doesnt work and what is worst is that if your phone lags just a little bit it freezes and after some seconds the LG logo appear forever until you take the battery out

niko22225 said:
Hello. I would Like to know which is the best ROM for O3D. with good battery life , working camera,3D support and less bugs it have its better. I tried NovAndroid It was really fast but The battery discharged in 2-4 hours. Then I tried the CM 7 but it was even worse then NovAndroid and then CM 10 nightly which had too much bugs. Right now Im using JB 4.1.0 but camera doesnt work and what is worst is that if your phone lags just a little bit it freezes and after some seconds the LG logo appear forever until you take the battery out
Click to expand...
Click to collapse
wrong section
btw... there is no best ROM as there is no best car. it is up to you what you want/need.

p-vlad said:
wrong section
btw... there is no best ROM as there is no best car. it is up to you what you want/need.
Click to expand...
Click to collapse
well said sir.

Cm10 was that bad cause you didn't install wkpark's bootloader v1.25. If you want 3d you have to use ICS e.g. Xbsall's v8.
Gesendet von meinem LGE-P920 mit Tapatalk 2

If i install the bootloader will it work better? The worst problem was that when phone freezed even when trying to play youtube video and I needed to take out battery 4 times a day because of freezes. And If I install all the things which are needed with ROM which would be better xbsall's rom or cm10 / or ThiaiZO3D? I will not act like I know these things I am total noob at this . And Can I brick my phone by changing bootloader or baseband?
Sent from my LG-P920 using xda app-developers app

p-vlad said:
wrong section
btw... there is no best ROM as there is no best car. it is up to you what you want/need.
Click to expand...
Click to collapse
I want a fully working fast and stable rom. Why wrong section ROMs belongs to android development or not?
Sent from my LG-P920 using xda app-developers app

Kodaro said:
Cm10 was that bad cause you didn't install wkpark's bootloader v1.25. If you want 3d you have to use ICS e.g. Xbsall's v8.
Gesendet von meinem LGE-P920 mit Tapatalk 2
Click to expand...
Click to collapse
And what is point of bootloader?
Sent from my LG-P920 using xda app-developers app

niko22225 said:
I want a fully working fast and stable rom. Why wrong section ROMs belongs to android development or not?
Sent from my LG-P920 using xda app-developers app
Click to expand...
Click to collapse
Questions should be posted in general section or in a thread about a Rom.
Sent from my LG-P920 using xda app-developers app

Would anyone answer me question about rom and stop saying I used wrong section please ? Im sorry I didn't know where to put it
Sent from my LG-P920 using xda app-developers app

niko22225 said:
Would anyone answer me question about rom and stop saying I used wrong section please ? Im sorry I didn't know where to put it
Sent from my LG-P920 using xda app-developers app
Click to expand...
Click to collapse
If I were you and would need 3d I would use xbsalls v8 Rom, or if I had some free time I'd set up dualboot and use as second Rom any 4.2 Rom if I need the newest os or 4.1 Rom if I need bluetooth
Sent from my LG-P920 using xda app-developers app

Don't do Cyanogen mod it will brick your phone.
ICS is good but you can't root it. no recovery mode.

linuxlol said:
Don't do Cyanogen mod it will brick your phone.
ICS is good but you can't root it. no recovery mode.
Click to expand...
Click to collapse
I have installed Cyanogenmod on Multiple Devices not once has it ever bricked a device infact you're more likely to brick your device flashing official updates xbsall has a a guide to recover from a brick so its not even an issue. please do some more reading ics has root . it has recovery just not a Custom one (CWM/TWRP)thats why wkparks Bootloader exists.
IF you Ain't Devi'N Don't a Start A thread in Dev Section.
@Mod Close thread or move it to General.

actually the root doesn't work because you can't get into recovery.
'waiting for device.'

linuxlol said:
actually the root doesn't work because you can't get into recovery.
'waiting for device.'
Click to expand...
Click to collapse
actually, you should read more carefully

tang097 said:
actually, you should read more carefully
Click to expand...
Click to collapse
nope says 'waiting for device.'
it flashes ICS properly but not recovery.
Power + Vol Down + 3d button does nothing but boot phone normally.

berni987654321 said:
If I were you and would need 3d I would use xbsalls v8 Rom, or if I had some free time I'd set up dualboot and use as second Rom any 4.2 Rom if I need the newest os or 4.1 Rom if I need bluetooth
Sent from my LG-P920 using xda app-developers app
Click to expand...
Click to collapse
Is there any guide to set up dualboot? and can I brick my phone with it and does It make phone slow ? I heard about xbsalls rom but it is saying that I first need to install different kernel but I dont know how to do that because my recovery doesnt have that option. And Which 4.1 or 4.2 would you recommend? I already used jb. but camera doesnt work and It would be really pain if I want to take a quick picture and I would need to reboot my phone for different rom with working camera. And If I install kernel will it be set on both of the roms? or I can set different for both of them?. btw Thanks for reply

linuxlol said:
Don't do Cyanogen mod it will brick your phone.
ICS is good but you can't root it. no recovery mode.
Click to expand...
Click to collapse
I alreaady tried CM both 7.2 and 10 both didnt bricked my phone and I had CWM recovery working with them...and root too...

CyanogenMod works fine - 100%. The reason it get bricked is BECAUSE whoever installed it didn't even pay attention.
And regarding the CWMR in CM10 - it works. I used ADB-flashable version of OMAP4 BIOS (wkpark V1.25a bootloader), and flashed CWMR at the same time as an option.
P.S. I used SuperSU as original Superuser wasn't properly installed in the nightly distro of CM10. Nevertheless, root works fine.
P.S.S. The reason I bricked my LG Thrill 4G was because I was trying too hard.
Sent from my LG-P920 using XDA

CM10.1 alpha8 by Dhiru - wifi doesnt work

Hi, i recently change my mobile rom from Stock to CM10.1 alpha 8 by dhiru.
Everything works perfectly except for wifi connection, i turn it on but after a few secons turn off by it self...
I've been looking for several days for a solution and found anything. The network works fine, i have EFS and IMEI backup, like i said works. But not the wifi, any solution?
I'll try coming back to STOCK Rom and later to CM10.1 again...
----------
EDIT 1
Well now wifi doesnt work either on DDLF2, connects and disconnect continuously.... any solution? I can see the SSIDs of the wifi's around me, i try to connect to my router, but doesnt stay on.

Theres no problem with wifi in alpha8, try to do a fresh install with full ddlf2 (dont forget pit) and then flash a8.
Sent from my GT-I9003 using xda premium

acuicultor said:
Theres no problem with wifi in alpha8, try to do a fresh install with full ddlf2 (dont forget pit) and then flash a8.
Sent from my GT-I9003 using xda premium
Click to expand...
Click to collapse
Thanks for the info, i just read all this thread "DDLF2 Full (PIT,BOOTLOADER,PDA,PHONE,CSC) Orignal Firmware"....and.... i'm not sure if flash with or without "Bootloader"... Some people say no problem, other say brick the phone... i just want to be sure.
I've currently CM10.1 alpha8 installed, thanks

Follow the instructions provided in the rom thread. Everything will be fine. Go ahead with ddlf2. When moving to 10.1 flash Dhiru;s rom first then flash your preferred rom. Good luck.

I confirm I've no Wifi problem at all with this room by following the clean install instruction. :angel:

Well i follow your tips... and wifi doesnt work....neither in DDLF2

Do not include the bootloader in odin...in case odin crashes/freeze and you included the bootloader you will hard brick your phone because you won't be able to access the download mod or recovery.
the bootloader of all stock gb roms and all custom roms is the same only include the bootloader if you are reverting back to Froyo.
Sent from my GT-I9003 using xda premium

Flash ddlf2 with pit and then alpha8.
Sent from my GT-I9003 using xda app-developers app