[Q] Spilled water on my phone :/ - LG Optimus 3D

I am on unlucky period I guess . I cracked my screen some days ago And Now spilled Ice tea over it Most went on screen and next to sd card slot :/ .but anyway Straight after it happened I ran into bathroom and dried it with towel. Turned it off and took out the battery and SD while running there lol. And then I put it out on sun and let it rest for 5 minutes but phone got EXTREMLY hot its like 36 celsius outside. I let it rest by the screen side so camera lenses dont burn. Then I searched on google and find some rice tip So I took my phone and put it in rice but Im afriad it wont work since there arent many holes in O3D. Is there anything more I can do ?

niko22225 said:
I am on unlucky period I guess . I cracked my screen some days ago And Now spilled Ice tea over it Most went on screen and next to sd card slot :/ .but anyway Straight after it happened I ran into bathroom and dried it with towel. Turned it off and took out the battery and SD while running there lol. And then I put it out on sun and let it rest for 5 minutes but phone got EXTREMLY hot its like 36 celsius outside. I let it rest by the screen side so camera lenses dont burn. Then I searched on google and find some rice tip So I took my phone and put it in rice but Im afriad it wont work since there arent many holes in O3D. Is there anything more I can do ?
Click to expand...
Click to collapse
http://www.youtube.com/watch?v=UsJ1lit2XA8

Related

help water damage tilt

maybe.... I did a search and could not find what i was looking for...or found too much.
This is what happened, it rained, my windows were up. When i got in the car it dropped in the middle console were it was a little water. It was there for a second before I grabbed it and put it in my purse.
When I got home i dried it..removing the sim card and battery. the white thing is still white. It will keep popping up with stuff.
I read if you can get the battery to heat up that will help. is that true?
I work for att so i know i am screwed if there is water damage. i can't buy another one cause i purchase at none committment and the last one cost me 410.
I done retrofited my phone so i will be praying all night that it works.
HELP GIVE ME FACTS
if the white thing is still white and if you have warranty go for a replacement coz i think they only check the white thing. or go to a local phone repair shop and they will do it for a cheap price. i had my nokia repaired from water damage for 15 pounds about 6 years ago.
Tips:
1....Dry it with a towel.
2....Take off the battery.
3....Never put the battery back and turn it on, if you are not sure the unit is totally dry.
4....You can wrap it in tissue (both battery and unit) and put it in a sealed plastic bag of rice grains. Why? Because rice grains are natural desicants. It will absorb all the excess moisture you can't dry with the towel. Leave it there for a minimum of 4 days.
5....You can only place the battery back and turn it on if you are really sure the unit and battery are totally dry.
update
every is working fine. I slept with it to under my pillow. I also check my sim card and that was wet. after I dryed that, i put my sim card in my standby phone.
Everything is working good now!
just a general instuction
1.get the battery out (because watter can't harm it if there is no electricity)
2a.dry it with a towel,just to get rid of any water that could float out of it
2b.dry it with a hairdryer or a radiator. (don't expose to fire)
3.instead of ryce you can use ethanol ( C2H5OH ) to get the water out and to clean it...use a brush to do it
4.try not to drop it again
personaly i dismantle the device when drying it...that way i'm sure there is no water left in it
but for inexperienced people or those devices with warranty...i suggest you don't dismantle it
I took the battery out and placed both battery and phone into instant rice. Works great
working fine
my phone is working fine.
It had some problems, it was the keyboard, kept acting up. so open it and let the keyboard dry (i don't use the keyboard...lol) took out the sim card and dried the area where it was, a little bit of water was on it. Dried it, and put it under my pillow for heat..lol.
Took it to work the next morning and it was having trouble with alignment when i used the stylus. so after redoing the alignment it has been working fine.
Thanks for the help.
Close the thead
Can anyone close the thread for me?
Dropped mine in the toilet!
The unthinkable happened. I have insurance on my tilt... but the thought of a whole day re-flashing and installing software made my stomach hurt.
I did the following-
1. Took out the battery within 10 seconds
2. Took out sim card & the microsd
3. Shook out all the water I could
4. Used a whole can of compressed air to blow any moisture out
5. Placed in a bag with silica gel packets for 30 hours
I was amazed when the thing booted right up! EVERYTHING works perfectly- wifi, GPS, camera, speaker, mic, buttons, and touchscreen! This thing is a tank!
Water Damaged, Turning but Stuck at Boot Screen
hi,
i was standing at sea side my prophet was in my pocket, i thought to put it in a plastic bag, while i was putting it in the bag suddenly a wave came up and dropped over the bag and the bag was filled with water , i took it out turned off and took out the battery, after drying it for a long time i turned it on back it booted up with some strange behavior and then after rebooting few times it got stuck on boot screen, now i have tried so many times to flash the new ROM even hard SPL, everything goes fine but when i turn it on after flashing, it always get stuck at boot screen, can anyone help me plz ?

WET fuze! help

Hi guys, I really need your help
I was on a BBQ with my friends, when they have just made a slutty with me...
They threw me on the pool with my fuze into shorts pocket, when I got up the pool my fuze was turned off, and I didn't try to turn it on, until pass the time and dry the wather.
So, I keept it in the sun around the place, and when I arrived home, I made around 5 sections of using hairdryer, and 3 days later I turned it on, and yes! IT WORKED!
I have heard about decreasing life cycle of the eletronics when wather gets around it, so, I am terrify about it, Would anybody be able to inform me if it is real? I like my fuze, and I would not like break down it. What sould I do?
Regards
Henrique
BAD NEWS!!! you need to remove all moisture from that phone!
Get RICE (several kinds if possible) and put them in a bowl or better yet a tupperware container. keep that phone in that container whenver you are not using it to keep it dry. The rice will absorb the moisture in the phone and prevent or slow the corrosion. Consider yourself lucky
Thank you Casseti.
I will follow your steps, I have another cell phone to use, How much time do you think I would have to do it?
Because I can do it right now, and leave it into the container until necessary.
Or did you say to use my fuze and do it everyday when I am not using it(sleeping for example)?
I'd like to solve it as soon as possible, I cannot beak down my fuze
Thanks
...you did get some good advice about using the rice.
The real trick is to indeed do what you can to get ALL of the mosture out of the unit. If you don't, then in a couple of weeks parts will start to corrode and the thing will start to fail.
took a dive 2 times in a lake on the way home from an xmas party
with my x1 and my ipod touch in the pocket
when I got up I tried to turn on my x1 and all it did was to turn on the "flash"
took out the batt and put them in the most dry place which was not all that dry
when I got home I put them on the radiator for 12hours and
the ipod was dead apart from showing the apple logo for a few sec
when connecting it to usb
and the x1 was flickery and the screen didn't respond to touch
so I put them both under rice on the radiator for 24hours
and then they both came to life
as good as before as part from the keys on x1 need a bit more pressure then before
Thank you all for advices...
I will leave it buried for 24hs into a tupperware full of rice, It is working very well, but I will do it to avoid corroding my fuze
thanks
Ive had this happen to me alot actually and my fuze comes back everytime. take the battery out and do as they instructed you to do, me... i have a room that stays at over 120 degree's. i just wipe it down with alchohol and let it dry out for an hour or two.. usually my screen needs to be realigned. and i have a seidio case and screen protectors.. trust me these phones are pretty well built.
Make sure you use uncooked rice.
My Fuze spent over an hour submerged in a ziploc bag filled with ice water at a Marilyn Manson concert. I had my phone/wallet/etc. in a separate ziploc bag to keep them dry in one of those soft bag coolers, with two ziploc bags of ice in it and some dickhead fell on the bag and the icewater burst from the two bags and managed to more or less flood the then broken bag with my phone in it.
When I noticed, the LED flash was blinking and the phone was otherwise off. I got really pissed and when I got home, I took the battery & micro SDHC card out and slid the keypad out and dried it as best I could, then let it sit for 36 hours in a dry environment, put the battery & micro SDHC card back in, tried turning it on, and BAM! Worked like a charm. That incident pretty much made me an HTC for life person. I am impressed with the build quality of this device. I love you, HTC!

[Q] A "washed" through laundry HTC Diamond

Hello,
by a rediculous accident I forgot my HTC Diamond in the pocket of my jeans when running the laundry :-(
Afterwards, I opened the cover, took out the battery and let the phone dry out for 2 days. Now I've put it back together, and connected it to the charger. The "ring" is flashing, so the battery is charging but the phone itself is not starting and the display remains completely black, not even the vibration kick on starting...
Is there anything I could do? Or perhaps there is a chance to get out some photos I have shot earlier, would also be something...
ive heard that taking apart your phone and leaving the parts in rice can help (because the rice absorbs moisture)
Off topic:
I read one Desire went through a washing sequence in a washing machine in Desire spesific forum and now this?
Is this a new hobby? I mean... washing smartphone
darkman088 said:
Or perhaps there is a chance to get out some photos I have shot earlier, would also be something...
Click to expand...
Click to collapse
If the photos are on your micro sd card, you may be able to plug that into an adapter and plug it into your PC and gain access to them that way. Just be sure that micro sd card is thoroughly dry before doing so.
WORKING !!!
Hello,
thanks for the replies... This morning the phone booted!!! I was able to download the photos!!! But the screen has stains, obviously the remaining water.
PLEASE advise on how to dry that thing completely !!!
I think that I'm gonna pass on the rice thing.
@aaa - YOU ARE A JUNKA$$ !!! You think that's really funny?!? Especially when I'm currently TIGHT on budget and need the money for other things and the next phone is planned no earlier than Christmas... I'm hesitating whether you're a real human being...
You can dry it completely in an oven for three hours at thirty degrees or so. I've done this three times. If you have a fan forced oven, just turn the fans on, that'll be enough.
A safer way (if you can obtain it) is to leave the phone for 24 hours in a bowl of dessicant silica gel. You'll often get a small packet of silica gel when buying new electronics or other moisture-affected things. That small packet is enough, just put it in an airtight bag and leave it for 24 hours.
The next step would be disassembly and a thorough swabbing with denatured alcohol, but that's pretty extreme and only needed when the device isn't booting.
Some LCDs are hard to get moisture out of, some are not. Leaving the phone with the silica gel for longer will have a better effect. As the previous poster mentioned, rice also works (quite well), but takes longer than silica.
Good luck with it!
Another thin that will absorb moisture is common table salt. Take the phone apart very carefully. Remove battery first, make sure you're grounded as well.
Hello everybody.
thanks a lot for the numerous advices...
Unfortunately, I have more to report...
The phone dried out and booted 2 or 3 days later, as I said. The stains on the display disappeared as by magic one day later.
Everything was fine for a week until I launched the camera 2 days ago. The backlight of the display went off and came back only after removing the batter for 15 minutes.
Now the backlight is going off pretty often, sometimes it requires to remove the battery 1-2 times before it starts working again and yesterday it happened that it got activated again when I got a call...
Any ideas please?
And also the phone keeps overheating from time to time without real load (GPS or wi-fi) which dries out the battery. But I had this problem also before the laundry
Sounds like that moisture in the LCD unit left a bit of residue and is shorting the backlight somewhere.
Only option there would be to disassemble and swab the LCD boards and cables/connectors with denatured alcohol.
Alternatively, a new LCD unit should fix the problem if it persists, just make sure you alcohol swab the connectors before plugging them back in
Someone also mentioned drying out in salt before. While that does work, salt is extremely corrosive on solder and SMCs, so I wouldn't recommend that route.
i heard hair dryers are the bomb at the screen moisture, just take off all that you can and blow dry it.
I just don't understand your refusal on using white rice. It have saved countless phones.
Uncooked white rice is VERY mosture negative. Just put layer of rice, put your phone on it, cover it completely with white rice, seal it in. Ziploc could work too.
In a day or two your partially dry phone will be bone-dry. If it was soaked still you could first try to shake out water as much as can, soak it in distilled water to remove minerals, then white rice it for 3 to 5 days.
I had this problem with my Touch Diamond. Everything worked, but while i was trying to dry it I broke one of the battery "hinges" but the phone still worked after except only with black screen. The best thing to do probably is just leave it for a couple of days and hopefully your phone will be back!
XXCoder said:
I just don't understand your refusal on using white rice. It have saved countless phones.
Uncooked white rice is VERY mosture negative. Just put layer of rice, put your phone on it, cover it completely with white rice, seal it in. Ziploc could work too.
In a day or two your partially dry phone will be bone-dry. If it was soaked still you could first try to shake out water as much as can, soak it in distilled water to remove minerals, then white rice it for 3 to 5 days.
Click to expand...
Click to collapse
exactly what ive said. ive read everywhere that rice is one of the best solutions out there
Like was said before you most likely have some corrosion on a few contacts, if you have about 6 bucks you can spare you can get residue free contact cleaner in an aerosol at radio shack or any electronics store and save yourself having to scrub each contact and connector. Just tear the phone down down spray all the contacts and connectors with contact cleaner let it sit for a few then spray it down with air duster to get any thats get under the resistors, in the connectors, etc that hasn't dried; let it sit till you're positive everythings dry and put it back together. Does the same thing as alcohol just alot less scrubbing.
Sent from my i897 w/Andromeda 3, Suckerpunch kernel, & 1.3Ghz OC using Tegrak.
Hello,
thanks for narrowing the problem down.
But for me it looks like something different, because:
1) I have been using the phone for 1 week without any problems and it got screwed after I've launched the camera app for the first time
2) The backlight works when I power on the phone. But its stop is event-triggered, like when I launch the sound or video player or when I get a call... Similar events would trigger the backlight back on.
Perhaps reflashing the software could fix that?
I went to a shop today and put another battery. The phone booted, anyway without any backlight, twice...
At least the device is still alive.
There probably was a tiny water bubble and it messed with phone when you turned camera on.
darkman088 said:
Hello,
thanks for narrowing the problem down.
But for me it looks like something different, because:
1) I have been using the phone for 1 week without any problems and it got screwed after I've launched the camera app for the first time
2) The backlight works when I power on the phone. But its stop is event-triggered, like when I launch the sound or video player or when I get a call... Similar events would trigger the backlight back on.
Perhaps reflashing the software could fix that?
I went to a shop today and put another battery. The phone booted, anyway without any backlight, twice...
At least the device is still alive.
Click to expand...
Click to collapse
remove the back cover and battery from the phone, and put everyting in a bowl of rice for a day,. should fix everything,
XXCoder said:
There probably was a tiny water bubble and it messed with phone when you turned camera on.
Click to expand...
Click to collapse
Either that or a short in the cameras circuit from corrosion, either way i'd pull it apart before it gets worse and check it out.
Sent from my i897 w/Andromeda 3, Suckerpunch kernel, & 1.3Ghz OC using Tegrak.

[Q] Wet htc one x. Help.

Hey guys today my One x felt in to the toilet. I was lucky enough to take the phon out of the water almost immedietlley. I tooked it out, and everything was working when i turned it on.But i was afraid of the water. So i put down the phone on the screen for it to dry on the sun.after a couple of minutes i checked my phone if everythings working and everything was still good.But then i put the phone on the back after a couple of minutes i came back the screen was flickering and got black.Put the phone back on the screen again, booted it and worked fine again.I read on the internet hoiw to fix a wet phone. And this is what ive done.I turned it off, but fastboot was on( dont know if it makes a difference).Took out the sim card, took the phone out of the case, left it on the sun for a half hour and bought some rice.Ive putted it into rice and its there for about 3-4 hours.And did i do everything good, should it work ? And when do i have to takje the phone out of the rice.Is it bad if fastboot was on.Please help.
salata1500 said:
Hey guys today my One x felt in to the toilet. I was lucky enough to take the phon out of the water almost immedietlley. I tooked it out, and everything was working when i turned it on.But i was afraid of the water. So i put down the phone on the screen for it to dry on the sun.after a couple of minutes i checked my phone if everythings working and everything was still good.But then i put the phone on the back after a couple of minutes i came back the screen was flickering and got black.Put the phone back on the screen again, booted it and worked fine again.I read on the internet hoiw to fix a wet phone. And this is what ive done.I turned it off, but fastboot was on( dont know if it makes a difference).Took out the sim card, took the phone out of the case, left it on the sun for a half hour and bought some rice.Ive putted it into rice and its there for about 3-4 hours.And did i do everything good, should it work ? And when do i have to takje the phone out of the rice.Is it bad if fastboot was on.Please help.
Click to expand...
Click to collapse
Shouldn't matter if it was on fastboot, that connects to a pc.. never saw one connect to rice yet. Seriously I would have turned it off being it was still wet. Just make sure it's dry before you start using it. Water bridges the wrong gap and ur phone will short something out. Wait a full 24 hours imo.
Sent from my HTC One XL using xda premium
You should have powered off the phone completely, as soon as you took it out of the water, then dried it out as much as possible before powering on again. Having the phone on, while water is inside causes short circuits, which fry the phone.
I'd say, power off the phone completely (no Fast boot), and dry out the phone as much as you can, before powering it on again. Keep the phone in a bag of rice for a a day or 2 (or longer, if you can). Keeping it in a warm (but not hot) area might help drying, as well. Then see if it powers on. The phone might might keep working fine, or might work for a while and die. Short of taking the phone apart (not for everyone) and try to dry it out more, there isn't much else that can be done.
My wife dropped her iPhone 5 in the toilet about a month after it was released. She turned it off right after she got it out of the toilet, then took it to the Genius Bar. The Apple tech took the phone apart, and dried it best they could. She told my wife the phone might turn on, might not. Or might work for a while, then just stop working one day. No real rhyme or reason to it, and not much else you can do about it. Her phone has been working fine ever since.
---------- Post added at 01:28 PM ---------- Previous post was at 01:22 PM ----------
31ken31 said:
Shouldn't matter if it was on fastboot, that connects to a pc..
Click to expand...
Click to collapse
Pretty sure he means the Sense option in Settings>Power>Fast boot; not the fastboot/adb interface.
Power off with Fast boot is not a true power off, but a deep sleep state. Might not make a huge difference. But if it were me, I would probably have turned off Fast boot in Settings before powering off and drying it.
Hmmm, what would happen if i would dry it when the phone was on.Would it be a 100 percent destroy?
No, it all depends on how much water got inside, and whether it got in a spot where it caused a short circuit. It might still be alright. But powering off completely is the safest way.
redpoint73 said:
No, it all depends on how much water got inside, and whether it got in a spot where it caused a short circuit. It might still be alright. But powering off completely is the safest way.
Click to expand...
Click to collapse
Hello . I would love to thank everybody for the help and tell you what happened after i took out the one x.Firstly it was discharged but had full battery befor so i plugged it in. And after 5 minutes it turned on . And everything works good accapt one big problem .. there are stains on the displayand im not sure if they will get off my display.Does anyone know how to fix this?
salata1500 said:
Hello . I would love to thank everybody for the help and tell you what happened after i took out the one x.Firstly it was discharged but had full battery befor so i plugged it in. And after 5 minutes it turned on . And everything works good accapt one big problem .. there are stains on the displayand im not sure if they will get off my display.Does anyone know how to fix this?
Click to expand...
Click to collapse
Never done this myself but saw the end result.. a guy I know propped up a hair dryer and turned it on low.. about 8-10 inches away ( adjust distance u want it warm, not burning hot.) Phone on in airplane mode. Don't need extra heat doing this. Ran hair dryer on and off for 3 days or so and the moisture slowly evaporated and display came back. This is just a suggestion, his went from horrible to very much tolerable.
Sent from my HTC One XL using xda premium
A few people here have gotten moisture under the screen glass, and I think they were able to dry it our using various methods. Warm (but not hot) air is good, and also lots of air exchange to speed evaporation. So the previously recommended blow dryer on low would work nicely, as it fits both of those descriptions. Some folks have also recommended on top of your refrigerator (almost always warm), and in front of a fan might help too.
haha skorry i know thos is late but just found the post. I put my phone in to rice for 48 hours. Took it out and there was little water under display. Everything came out and phone was just washed. Htc one x was a good phone.
Sent from my GT-N7100 using XDA Free mobile app

Water Damaged Phone, Help!

Hey!
So On Saturday I dropped my phone down the toilet by accident, i removed it from the toilet, after about 5-10 seconds, and it was still on, it seemed fine, so I was like ohh okay...i dried it ect ect and it was working fine, but some parts of the touch wasn't working so I left it on as i could not switch it off. On that night i dried it with the hair dryer as well, didn't work, so wrapped it in a towel and but it in the boiler cubard to keep warm for around 12 hours maybe more...tried to switch it on and it didn't work again.
the day later (Sunday) decided to take it apart, and dry the insides, still wasn't working, but the notification light is on and sometimes flickers so i slept with it under my pillow as it would keep warm over night, on Monday, i put the charger in and the screen came on to that battery charging screen for around 5-6 seconds and it said it was on 0%....the notification light was still on.
I Put the phone in some rice in a box, wrapped it in a towel and left it in the boiler cubard again until Wednesday, afternoon....
what can i do?? will this work?? how much would it cost to get fixed?
is the touch screen broke? do i need new battery? ect ect
THANKS!
Best thing to do if you get a phone wet is turn it off and leave it off for at least a week. The problem is that moisture gets inside the phone itself and just takes time to evaporate. If you turn it on or leave it on after water gets in you run the risk of shorting something out and killing the phone (which is what sounds like happened). As far as repairing it is concerned, might as well get a new one, it'll cost less.
your phone should survive just give it some time in the rice, my brothers samsung ace went through something similar and he put it in rice and it was fine after a day buried in it, there is videos of the moto g submerged in water for a while and still works fine
good luck

Categories

Resources