★[8/27] [Casual] [Root, Unlock, Recovery] Vzw S3 Toolkit or 1-Click!![Up to MF1]★
DO NOT USE THIS IF YOU TOOK THE 4.3 UPDATE THIS WILL BRICK YOUR PHONE, THIS IS ONLY COMPATIBLE WITH FIRMWARES UP TO 4.1.2 MF1
First off BIG Thanks to Adam Outler for making CASUAL and Open sourcing it, and djrbliss for the motochopper root method!
Update: Have now Remade the Casual into more of a AIO Toolkit! Based off of adams initial idea back in the ICS days
this gives you the option to root, unlock your bootloader, flash a recovery of your choice and there is even reboot to download mode/recovery options
Fix's: New version 795b should fix device not shown as connected and misc errors
Disclaimer: This is only for the Verizon S3. DO NOT use this on any model other then the SCH-I535, as always im not responsible for anything that happens to your phone. This most likely will void your warranty.
Instructions to root/unlock/recovery:
1. enable usb debugging
2. put usb mode to mtp
3. Root Your phone with the root option (if you just want root stop here if u want to unlock bootloader and install a custom recovery continue)
4. verify root works aka go into SuperSu app and update Binary
5. flash the insecure bootloader (this unlocks the bootloader)
6. flash custom recovery of your choice (twrp, cwm, cwm touch all included)
Download: http://www.androidfilehost.com/?fid=23060877490002549
Md5sum: 8510cad61525fae9bdf424f9660db39d
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Credits:
Adam Outler - CASUAL platform
Djrbliss - the motochopper root method
Chainfire - SuperSU
TeamWin- TWRP
Koush- Clockworkmod Recoverys
XDA:DevDB Information
★[8/27] [Casual] [Root, Unlock, Recovery] Vzw S3 Toolkit or 1-Click!! [Up to MF1]★, a Tool/Utility for the Verizon Samsung Galaxy S III
Contributors
beanstown106
Version Information
Status: Stable
Created 2013-09-07
Last Updated 2013-12-22
One Click Do ALL Casual (older)
First off BIG Thanks to Adam Outler for making CASUAL and Open sourcing it, and djrbliss for the motochopper root method!
*****this method is now obsolete it still works fine but for the most control/stability i suggest using the new casual in the above post*****
Disclaimer: This is only for the Verizon S3 it checks it so dont even try another phone , as always im not responsible for anything that happens to your phone. This most likely will void your warranty.
Instructions:
1. enable usb debugging
2. plug in usb cable
3. hit Forget You Verizon(Do It) button
4. smile - profit within seconds
Download: http://www.androidfilehost.com/?fid=23011596498370911
Credits:
Adam Outler - CASUAL platform
Djrbliss - the motochopper root method
Chainfire - SuperSU
TeamWin- TWRP
again
Sweeeeeeeeeeet!
Great job Beans. Thanks for letting me test!
Guys, give Beans some love on this. Makes life a lot easier!
You want me to test
Sent from my SCH-I535 using xda app-developers app
---------- Post added at 02:02 AM ---------- Previous post was at 01:53 AM ----------
I would like to try it as and test.....but I'm rooted already.....do I need to unroot first
Sent from my SCH-I535 using xda app-developers app
kenbrownstone said:
You want me to test
Sent from my SCH-I535 using xda app-developers app
---------- Post added at 02:02 AM ---------- Previous post was at 01:53 AM ----------
I would like to try it as and test.....but I'm rooted already.....do I need to unroot first
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
no i sat here and rerooted a hundred times to make sure it was ok lol, so test away
Time to play
Sent from my SCH-I535 using xda app-developers app
---------- Post added at 02:48 AM ---------- Previous post was at 02:10 AM ----------
beanstown106 said:
First off BIG Thanks to Adam Outler for making CASUAL and Open sourcing it, and djrbliss for the motochopper root method!
So while trying to do this ota today i realized that flashing 5 different things just to get rooted, unlocked, and have a custom recovery was quite cumbersome. and i happen to stumble across adams video about how to make casual for pretty much any task with that i spent some time and created a 1 click Root, Unlock, Recovery Tool with casual!!
Disclaimer: This is only for the Verizon S3 it checks it so dont even try another phone , as always im not responsible for anything that happens to your phone. This most likely will void your warranty.
Instructions:
1. enable usb debugging
2. plug in usb cable
3. hit Forget You Verizon(Do It) button
4. smile - profit within seconds
Download: http://www.androidfilehost.com/?fid=23011596498370911
Credits:
Adam Outler - CASUAL platform
Djrbliss - the motochopper root method
Chainfire - SuperSU
TeamWin- TWRP
Click to expand...
Click to collapse
how do i run this file ....sorry im a idiot
Amazing work. Thank you so much for all you do for this community Beans! You just made our lives so much easier.
any takers.looked on net and searched but cant get the file to run ..can anyone tell how to use a jar file.....:angel:
kenbrownstone said:
Time to play
Sent from my SCH-I535 using xda app-developers app
---------- Post added at 02:48 AM ---------- Previous post was at 02:10 AM ----------
how do i run this file ....sorry im a idiot
Click to expand...
Click to collapse
What OS? Do you have Java Runtime Environment installed? You should be able to right click the file, and go to Open With --> JRE. Or open a terminal, and type java -jar "your file name"
Sent from my SCH-I535 using Tapatalk 2
Awesome
Sent from my SCH-I535 using Xparent BlueTapatalk 2
obeygiant said:
What OS? Do you have Java Runtime Environment installed? You should be able to right click the file, and go to Open With --> JRE. Or open a terminal, and type java -jar "your file name"
Sent from my SCH-I535 using Tapatalk 2
Click to expand...
Click to collapse
thanks...i had to update my java.....but during install it stopped and said this is not for your device
Edit=I got it to work
Is this for Windows, Mac, or both? I ask cuz the ICS version of this was Mac/Linux officially.
Sent from my SCH-I535 using Tapatalk 4 Beta
SlimSnoopOS said:
Is this for Windows, Mac, or both? I ask cuz the ICS version of this was Mac/Linux officially.
Sent from my SCH-I535 using Tapatalk 4 Beta
Click to expand...
Click to collapse
I used this on windows 7 and it worked fine.
This is so much easier now, simply amazing. Thank You!
SlimSnoopOS said:
Is this for Windows, Mac, or both? I ask cuz the ICS version of this was Mac/Linux officially.
Sent from my SCH-I535 using Tapatalk 4 Beta
Click to expand...
Click to collapse
Its built from the newest casual nightly so it should work on all even rasberry pi!!
Sent from my SCH-I605 using Tapatalk 2
great tool!
I literally missed trying this by one day. I got my S3 yesterday and suppose I did it the "old-fashion way" but it's good for me bc ODIN is so foreign to me. Thanks for the great tool though!
since this uses TWRP and I prefer CWM, after this is finished, I can just flash my CWM recovery.img in odin and be fine right?
droideris1 said:
since this uses TWRP and I prefer CWM, after this is finished, I can just flash my CWM recovery.img in odin and be fine right?
Click to expand...
Click to collapse
ya or u could just download rom manager and flash cwm in the app
I can't wait to try this on wife's phone she has stock 4.1.2..... No root.... I've been rooted since I got this in Dec. I keep telling her let me do it so Verizon can't force the **** on you and to turn off the **** she never uses..... Thanks guys will report back
Sent from my SCH-I535 using xda app-developers app
Can I use this to just root and not flash a new recovery?
Sent from my SCH-I535 using xda app-developers app
Related
Please do not hot link to my download. Link to the post and please don't use my work without asking.
Version 0.6.7 is up for download (no new root options)
Added general android tools:
Rebooting the device
Rebooting in to Recovery
Backing up your photos to your Mac
Fixing File permissions
Version 0.6.5 is available at the website.
- Updated the Recovery to TWRP 2.2.2.1 for the Kindle Fire
Version 0.6.4 changes
- Changed Kindle Fire recovery to TWRP.
- Updated Kindle Fire bootloader to FireFireFire 1.4a
- Added Kindle Fire recovery and bootloader updater for user who just want to update to the latest versions.
BreakDroid is a work in progress. My goal is to make a tool for Mac users that will root several different android phones and tablets as well as install the android sdk (adb).
It is very important to note that I only made the tools to automate these processes. All the developers of the root exploits and recoveries are listed below.
Current supported Devices-
Kindle Fire - Tested Version 6.2.2., 6.3 & 6.3.1
Galaxy Nexus - Seems to work. Tested with version 0.4.2+
Galaxy Note - Needs more testers - Will only work on some notes.
Droid Razr - Should also work on other Droid branded phones
All phones that can be rooted by GingerBreak
All phones that can be rooted by psneuter
All phones that can be rooted by zergRush - has been tested and works on many devices. vCheck the comments on the download page.
The Website
Screenshot
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Credits -
This app and all the scripts were made by @northmendo
jcase was great support for questions and he is the reason we have root on the Kindle Fire thanks to burritoroot.
-Doomlord on xda built the Kindle Fire recovery.
Dan Rosenberg for the motofail exploit - @djrbliss
Revolutionary Team for zergRush http://revolutionary.io/
I think credit for psneuter goes to scotty2
c-skills for GingerBreak
Pokey9000 for fbmode - used to root Kindle Fire 6.3
Bootloader Credits go to
- Pokey9000: For the original build. Hard to dev at all w/o a way of getting to recovery.
- eldarerathis: Menu code was used from the Extended FIREFIREFIRE github
- Icemank121: All splash/menu screens
- Hashcode: For this build
There is a list of devices that can be rooted by zergRush in the ReadMe
If this helped you please hit the thanks button
The Alpha download is available on the website.
I really need a tester for the Galaxy Nexus and the Galaxy Note. Please pm me if you are willing.
Android noob here. Att galaxy note + mac air 11". let me know if need note tester. I'll ask around about nexus.
Sent from my SAMSUNG-SGH-I717 using xda premium
If your willing. I will look at add the note.
Post no longer needed
Hey I'm just wondering if this has been tested for the AT&T galaxy note??
Sent from my SGH-I717D using XDA
RFitzy said:
Hey I'm just wondering if this has been tested for the AT&T galaxy note??
Sent from my SGH-I717D using XDA
Click to expand...
Click to collapse
It has not. That is what I wrote it for though. If your brave enough try it. It shouldn't do any damage either way. Never 100% sure though.
The Droid Razr has been fully tested and works.
i wanna im just worried about damaging the a i just bought it
---------- Post added at 05:01 PM ---------- Previous post was at 04:47 PM ----------
just wnna let you know i cant download 0.3 version of BreakDroid
RFitzy said:
i wanna im just worried about damaging the a i just bought it
---------- Post added at 05:01 PM ---------- Previous post was at 04:47 PM ----------
just wnna let you know i cant download 0.3 version of BreakDroid
Click to expand...
Click to collapse
The download is fixed, thanks for the heads up.
I'm almost positive it can't ruin your device. I ran the Galaxy note app on a different phone about 10 times yesterday to see if it would work with no adverse effects. I can't guarantee anything but I'm pretty sure you'll be okay.
northmendo said:
The download is fixed, thanks for the heads up.
I'm almost positive it can't ruin your device. I ran the Galaxy note app on a different phone about 10 times yesterday to see if it would work with no adverse effects. I can't guarantee anything but I'm pretty sure you'll be okay.
Click to expand...
Click to collapse
Thanks so much! I am going to install on my ATT note ASAP. Is there a noob step by step install guide?
Thanks!
Ceasare said:
Thanks so much! I am going to install on my ATT note ASAP. Is there a noob step by step install guide?
Thanks!
Click to expand...
Click to collapse
Not needed. Just open the app from the disk image and follow the instructions. Let me know if it works for you.
im excited to see the results!
RFitzy said:
im excited to see the results!
Click to expand...
Click to collapse
Any luck with the note?
northmendo said:
Any luck with the note?
Click to expand...
Click to collapse
I am on a business junket. I will install it sat, for if i brick my phone, I will loose my contact data albeit on a temp basis. I will let you know results when completed. . . just being cautious.
ok sounds good!
Gonna test it on a GSM Galaxy Nexus
--- edit ---
Done, everything works fine except one thing.
√ Install Android SDK installs the Android SDK in /home/ folder OK
√ Galaxy Nexus Tools starts OK
X Unlock Galaxy Nexus gives these errors before halting:
/Volumes/BreakDroid/.files/galaxynexus/unlock.sh: line 16: unexpected EOF while looking for matching `"'
/Volumes/BreakDroid/.files/galaxynexus/unlock.sh: line 24: syntax error: unexpected end of file
Click to expand...
Click to collapse
Done that manually to test the other options.
√ Install recovery downloads and installs 5.5.0.4 recovery just fine and reboots to it right away.
√ Install root files does what it says, easy and painless.
And... I think that's all, I think it's kinda anoying that everytime you perform one of the steps a new browser window opens with the Paypal donation site, you may want to do that only when quitting the script or something.
Just my 2 cents. I've followed you on Twitter (@migatohacemiau), send me a PM if you need more testing on the bootloader issue
i have the following phones at my disposal:
T-mobile G2 (HTC Desire Z PC10100)
Rooted CM7
T-mobile G2X (LG Optimus 2X P999)
Rooted
Verizon Xperia Play (Sony Ericsson Zeus R800i)
Stock
T-mobile G1 (HTC Dream DREA100)
Rooted CM6
T-mobile MyTouch 4G (HTC Glacier PD15100)
Rooted CM7
T-Mobile MyTouch 3G Slide (HTC Espresso)
Latest Stock
how can i help, i am willing to unroot devices if necessary (im just hoping there's a big chance that they will be easily rootable after )
5noc said:
Gonna test it on a GSM Galaxy Nexus
--- edit ---
Done, everything works fine except one thing.
√ Install Android SDK installs the Android SDK in /home/ folder OK
√ Galaxy Nexus Tools starts OK
X Unlock Galaxy Nexus gives these errors before halting:
Done that manually to test the other options.
√ Install recovery downloads and installs 5.5.0.4 recovery just fine and reboots to it right away.
√ Install root files does what it says, easy and painless.
And... I think that's all, I think it's kinda anoying that everytime you perform one of the steps a new browser window opens with the Paypal donation site, you may want to do that only when quitting the script or something.
Just my 2 cents. I've followed you on Twitter (@migatohacemiau), send me a PM if you need more testing on the bootloader issue
Click to expand...
Click to collapse
Thanks so much for testing the Galaxy Nexus. I will work on the errors right now.
After a bunch of work, I present to you WORKING CLOCKWORKMOD!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
*Big thanks to those of you who worked on the d2att, that code was invaluable for getting a working graphics driver and some unknowns I could not see.*
Confirmed on:
- SGH-i497 (ATT)
- SGH-T779 (T-Mobile)
You can also use this to get ROOT!
Requirements:
- Windows Computer with Samsung Drivers installed
- Odin if on Windows/Heimdall on Linux
- sdcard in the /sdcard slot
1. Download my Odin package here:
https://dl.dropbox.com/u/58849669/espresso10att/cwm_recovery_espresso10att_childofthehorn.tar.md5
2. Download SuperSu from Chainfire and copy to your sdcard:
http://forum.xda-developers.com/showthread.php?t=1538053
3. Open Odin (as administrator) and hit the "PDA" button, remember to uncheck the reset
4. Mount Device into Download Mode (PWR, Vol) and Hit go on Odin once it appears.
5. Once Finished, Reboot into Recovery
6. Backup your existing image
7. Flash SuperSu from SDcard
8. WInning.
TO RETURN TO STOCK RECOVERY USE THIS ODIN FLASHABLE:
https://dl.dropbox.com/u/58849669/espresso10att/espresso10_stock_childofthehorn.tar.md5
****In the process of doing this, I had to bust my /system in order to get the files required.
I would strongly appreciate if anyone can send me a copy of their boot.img and either a copy of their system.img or system.tar.ext4 made by clockworkmod. ****
Part of doing this was integrating everything with the d2-variant build chains in CM9 and CM10. Say thanks in the Thread if you like this or promote this thread so it makes it to the main page.
GITHUB: https://github.com/childofthehorn/espresso10att
Thanks Guys!
AWESOME!!!
Sweet, thanks so much, worked amazing on my T-Mobile Tab 2, got root awaiting a CM9 ROM. No rush, just happy to have my root on my plaything. Keep up the amazing work.
FINALLY! You just made my evening! Incoming Donation.
Confirmation number: 75052748C2563800A
---------- Post added at 09:43 PM ---------- Previous post was at 09:30 PM ----------
I have the ATT device as well, running a full stock rooted backup as we speak. I will get it uploaded when completed. Please hold...
Glad to hear it guys!
Very happy to know it works just as well on the T-mobile one.
I can get some custom ROMs going if I can get a copy of someone's /system and boot.img .
First goal is CM9 and then a migration to CM10.1 once that is pretty stabile.
Luckily for us, we have two amazingly complete CM sources with the d2att ( and nice d2 kernel chain!) and p5100 which cover most of our requirements as far as setup and drivers/libs.
Thank You for the support. If you like this, check out my site, say thanks, and/or vote this up onto the main site for a post so it is more visible.
I will be posting the original stock recovery.IMG in Odin flash able later tonight.
Sent from my Galaxy Nexus using Tapatalk 2
Childofthehorn said:
Glad to hear it guys!
Very happy to know it works just as well on the T-mobile one.
I can get some custom ROMs going if I can get a copy of someone's /system and boot.img .
First goal is CM9 and then a migration to CM10.1 once that is pretty stabile.
Luckily for us, we have two amazingly complete CM sources with the d2att ( and nice d2 kernel chain!) and p5100 which cover most of our requirements as far as setup and drivers/libs.
Thank You for the support. If you like this, check out my site, say thanks, and/or vote this up onto the main site for a post so it is more visible.
I will be posting the original stock recovery.IMG in Odin flash able later tonight.
Sent from my Galaxy Nexus using Tapatalk 2
Click to expand...
Click to collapse
If I was home I could help with my T-Mobile tab 2. Currently out stealing cars legally tho. Just glad for root and I'll help if I can in anyway.
Sent from my ThunderBolt using xda app-developers app
Amazing work! Thank you.
Will this wipe my current apps and data?
dmunjal said:
Amazing work! Thank you.
Will this wipe my current apps and data?
Click to expand...
Click to collapse
Not at all. You are merely flashing Root over your existing install. I also suggest that you make a backup prior to installing SuperSU. All of your non-native apps and contacts, etc are on /data and SuperSU does not touch /data at all.
Just posted up the Original Stock Recovery in an Odin Flashable if you want to return to stock.
Thanks for figuring this out. If you still need boot img or anything from the t-mobile version let me know. Also is it possible to add the t-mobile model number (SGH-T779) to the thread title, it would help others to find it.
Thanks again
Edit: I just saw that you added the model to the OP. Thanks again
Yeah I can extract system images from the CWM blobs if that is all you have. However a simple tar ball of /system and your boot.img would be helpful.
No more help at this time, however that might change with CM9 integration for T-Mobile.
Sent from my Galaxy Nexus using Tapatalk 2
Thanks a lot !, I had waiting a long time for this.
I have a GT-P5113 and I have the latest jellybean update (4.1.1). Do you know if this method works for my tablet, and if it doesn't, do you know a method for this model?
Sent from my GT-P5113 Galaxy Tab 2 10.1, the ipad pwning monster
Jooni said:
I have a GT-P5113 and I have the latest jellybean update (4.1.1). Do you know if this method works for my tablet, and if it doesn't, do you know a method for this model?
Sent from my GT-P5113 Galaxy Tab 2 10.1, the ipad pwning monster
Click to expand...
Click to collapse
^ This is covered elsewhere:
http://forum.xda-developers.com/showthread.php?t=1657056
BTW - The SGH-i497 has been added to CF-Autoroot by Chainfire. Now get rootness the easy way.
http://autoroot.chainfire.eu/
The T779 is in there as well.
For the T mobile users I will be putting together a Device tree for you guys as well. Let me know if there is anyone who wants to head up the CM9 port for the T779.
Childofthehorn
will this root work with the SCH-I915 Verizon ?
warlord002 said:
Childofthehorn
will this root work with the SCH-I915 Verizon ?
Click to expand...
Click to collapse
I honestly have no idea! That Model Number did not appear in the code, however the hardware is the same and considering the partition table is almost exactly like the D2 it just might.
IF YOU DO SO, YOU DO IT AT YOUR OWN RISK. I am not responsible!
Worst Case scenario, you will not be able to "wipe" your device in case of a failure easily until you perform a Manual update using Kies (usually the Samsung firmware has the recovery.img in it, but no guarantees!).
Get me a Copy of the Recovery.img or Full Odin Image for that device and I can probably make it work. The same would be true of the new SPH-P500 for Sprint. I do not have a Verzion version so I cannot test it. If you are a willing volunteer, let me know.
The Gtab2 10.1 LTE is Basically a Blown up Galaxy S3. However I am quickly finding that the AOSP D2 Kernel source doesnt like me much... erg.
Im out of town now but if no one shares their system I will dump mine when I get back sat morning.
Sent from my SGH-T779 using Tapatalk HD
Childofthehorn;
Get me a Copy of the Recovery.img or Full Odin Image for that device and I can probably make it work. The same would be true of the new SPH-P500 for Sprint. I do not have a Verzion version so I cannot test it. If you are a willing volunteer said:
I don;t know how to get that img or Odin image for you from my verizon tab 2 . but if you tell me how to do so i will surely try to make one ,
thanks
Click to expand...
Click to collapse
All the rooting steps are the same as the other gtab 2 10.1???
Yes. Basically.
These are the standard root steps for all Samsung devices with unlocked boot loaders.
Its the software and images that you are putting on your device which are different.
Sent from my Galaxy Nexus using Tapatalk 2
Hello All,
I just thought i would share with you my little tool for hacking the Candy Crush Saga (CCs) save game.
Non root users
Explains how to get extra lives with a date hack.
Has a simple GUI for date hacking and launching CCs
root users
Add as many lives as you want
Skip as many levels as you want.
Unlock all levels
root users - under development
One click - Access all levels
Extra boosters
Never run out of lives service
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Install
Code:
/***************
* Disclaimer *
****************
* As the developer i am not responsible for corrupting your precious Candy Crush
* Saga save game.
*
* Hacking third party files runs the risk of harming that application, by using
* this application you agree to take the risk your save game may get lost.
*/
Note: To my knowledge this application has never corrupted a save game, though the risks remain
Tested on multiple devices using ClockworkMOD's Superser application and binary.
You must have CCs installed and have played at least one level for the hack to work. (Future releases may work on fresh installs.)
Mod edit: Links removed
Feel free to request potential hacks.
Change Log
v1.2.0
Altered the way the save game is found.
Some devices add a unique id to the save game. Added a routine to figure out the unique id.
v1.1.3
Better error reporting.
Reports not installed if CCs is not installed
Reports no save game if the first level has not been completed
Will only report no root access if there isn't any root access.
v1.1.2 Beta
No root bug fix (potentially) (Dropped)
v1.1
XDA - Discussion link (Added)
Optimisation of hack - Removing debug code
v1.0
Initial Release
Is there any way/can you convert this game to for armv6 device, sorry for silly question
Sent from my GT-S5830 using Tapatalk 2
oddie95 said:
Is there any way/can you convert this game to for armv6 device, sorry for silly question
Sent from my GT-S5830 using Tapatalk 2
Click to expand...
Click to collapse
This App doesn't use any native code, so unless I'm missing understanding something it should run all Android devices.
The application says it cannot gain root access. My device IS rooted. What am I suppose to do?
Sent frm MzBlastTyrant's Nexus 7
bb_cicamica said:
The application says it cannot gain root access. My device IS rooted. What am I suppose to do?
Sent frm MzBlastTyrant's Nexus 7
Click to expand...
Click to collapse
Check your SuperUser application, you may not have not have granted the application permission to use root.
If you have done so, please advise what SuperUser tool you are using.
i also cannot gain root access even though i am rooted, i am using SuperSU v1.25
*update* i installed the one that u recommend superuser 1.0.1.7 and it still doesn't work, it shows that its been give permissions but then shows that it couldn't gain access
Same here
Sent from my LG-E970 using xda app-developers app
manwinder said:
i also cannot gain root access even though i am rooted, i am using SuperSU v1.25
*update* i installed the one that u recommend superuser 1.0.1.7 and it still doesn't work, it shows that its been give permissions but then shows that it couldn't gain access
Click to expand...
Click to collapse
lingo2012 said:
Same here
Sent from my LG-E970 using xda app-developers app
Click to expand...
Click to collapse
Sorry to here you are having trouble guys, I'll try and debug it. The 5 devices I have tested it on have worked.
Please post the following to help me get it working.
Device:
Android Version:
ROM (if not stock):
Super user version:
May have to release a test version with extra debug if I can't recreate the issues.
Android version 4.1.2 Stock rooted. SuperSu v.1.25
Sent from my LG-E970 using xda app-developers app
---------- Post added at 01:54 PM ---------- Previous post was at 01:52 PM ----------
Devive Lg Optimus G.... sorry forgot that one lol
Sent from my LG-E970 using xda app-developers app
I have root, and have permission,, though i can't press the buttons for extra lives or to skip a level? Galaxy s3, wanam lite with latest su
Edit: it says it can't get root access, but in su it is enabled
Galaxy Nexus maguro
4.2.2
Aokp official build 6
Not sure with the superuser version, it's integrated in the rom
Stock ROM, custom user.
Sent from my Galaxy Nexus using xda premium
lingo2012 said:
Android version 4.1.2 Stock rooted. SuperSu v.1.25
Sent from my LG-E970 using xda app-developers app
---------- Post added at 01:54 PM ---------- Previous post was at 01:52 PM ----------
Devive Lg Optimus G.... sorry forgot that one lol
Sent from my LG-E970 using xda app-developers app
Click to expand...
Click to collapse
Thanks for all the work, much appreciated
Device:Samsung Galaxy s3 t999v but rom is t999
Android Version: 4.1.2
ROM (if not stock): CSROM Tha BMB v1.2
Super user version: V1.25
yogosun said:
I have root, and have permission,, though i can't press the buttons for extra lives or to skip a level? Galaxy s3, wanam lite with latest su
Edit: it says it can't get root access, but in su it is enabled
Click to expand...
Click to collapse
Same here. It cannot gain root access although I am rooted. I have a galaxy tab 10"
Sent from my GT-P7510 using Tapatalk HD
not working. nexus4
4.2.2 -root-
stock
clockworkmod superuser
tapatalk
For all who have the no root issue, please try downloading the Test Version (v1.1.1 Beta) It is also in the OP.
Please post any screen shots or logcats you get that are tagged with "Post To XDA". You will what i mean if you see it!
Also please report if the fix works!! Thats important!
Thanks for your patience!
-=nezero=- said:
For all who have the no root issue, please try downloading the Test Version (v1.1.1 Beta) It is also in the OP.
Please post any screen shots or logcats you get that are tagged with "Post To XDA". You will what i mean if you see it!
Also please report if the fix works!! Thats important!
Thanks for your patience!
Click to expand...
Click to collapse
"Post to xda"?
works well for me . im using i9100G with fantasymod and has superuser . btw, can u add hack to get all upgrade item ? just asking no offence
yogosun said:
"Post to xda"?
Click to expand...
Click to collapse
Thanks, just updated it again. Can you try again, you will get a similar message, but it will have different data in it. (Same link)
If possible, please provide logcat info too.
peped94 said:
works well for me . im using i9100G with fantasymod and has superuser . btw, can u add hack to get all upgrade item ? just asking no offence
Click to expand...
Click to collapse
Non taken! Added to the development list, don't forget to click thanks! Edit: Just noticed you have! Cheers!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
-
Kingo Android Root is a well-designed, aesthetically pleasing application for Windows based computers that forgoes the device specific route, and offers rooting for a lot of Android devices from a variety of manufacturers. Supported phones include the likes of Google Nexus lineup, several HTC devices including HTC One, One X, One V, Droid Eris, Motorola Defy, a number of Samsung phones, popular LG devices and some smartphones from Sony. It offers a true one-click root experience, where you have to just download the application, install it, connect your device and click Root.
There are a few things that you need to be mindful of. When connecting your device, you need to have USB Debugging enabled in Android settings. There’s no requirement for pre-installed device drivers, as the software will take care of that for you. In fact, it will give you the Root option only after the drivers have been properly configured. Past that, all you have to do is hit the Root button, and let the application work its magic.
The app pushes SuperSU binaries which are slightly outdated, but get instantly updated to the new version thanks to Google Play. However, it won’t install a custom recovery, so that part you’ll have to take care of manually. Kingo Android Root supports Android versions up to 4.3.
Homepage: http://www.kingoapp.com/index.htm http://www.kingoapp.com/android-root.htm
How to Use the Kingo Android Root One-Click Tool
Step 1. Download the Kingo Android Root windows application and install it on your Windows desktop.
Step 2. Once the installation is finished, run the application and connect the device to the computer with USB cable to start the process. Now the application will install the latest drivers on your PC.
Step 3. This will take some time to install the drivers. Once the drivers are installed on your PC, you will see a new screen on your desktop with your device name and "ROOT" button. See the screenshot below:
Step 4. Hit the ROOT Button from the app screen to begin the root process on your device.
Step 5. Be patient. It will take some time to finish the process. Once the operation is completed, you will see the “Root Succeeded” message on your screen.
Your device should now be rooted. With the help of this application you can unroot your device as well. All you have to do is select the Unroot button and follow the onscreen instructions. For more help, check the application FAQ section Mod Edit here too..
**None of this is my material. This is the work of the Kingo team.**
A good and needed write up. Thanks beerdroid!
Awesome. I'm happy I won't need to deal with that terminal stuff
Sent from my Samsung Galaxy S4 (SGH-i337) via Tapatalk 4
Finally someone titled this correctly.
humblehyper said:
Finally someone titled this correctly. Give credit to the original poster
Click to expand...
Click to collapse
Credit is given in the op
I rooted my Rogers G4 with this.
A+
---------- Post added at 08:47 PM ---------- Previous post was at 08:45 PM ----------
I rooted my Rogers G4 with this.
A+
So it works with MF3 can this developer crack the bootloader to.that would be awesome
Sent from my SAMSUNG-SGH-I337 using xda premium
Im all rooted!
Everything is taking forever.. It's still Connecting from when it told me to Grant Super User permissions when the screen pops up on my phone. Any ideas why?
ccsoccer23 said:
Everything is taking forever.. It's still Connecting from when it told me to Grant Super User permissions when the screen pops up on my phone. Any ideas why?
Click to expand...
Click to collapse
did you end getting this resolved? reroot, reboot? keep us posted. if we iron out early problems and errors, future users will have better/quicker fixes. cheers.
Awesome! I got a brand new GS4 most likely on MF3 coming in today! Gonna download this and get it prep'd!
xBeerdroiDx said:
did you end getting this resolved? reroot, reboot? keep us posted. if we iron out early problems and errors, future users will have better/quicker fixes. cheers.
Click to expand...
Click to collapse
It's unclear what was causing the slowness, but after a while it finally all went through and my phone is now rooted. Thanks!
I did have to restart the App several times while it was downloading the update. That also seemed to be going very slowly. My download speeds wouldn't go above 100kb/s (consistently) and after a while the download will stop at a certain percentage. I would then have to restart the app, and then it would continue from the percentage but then stop at another percentage.
I have 25+ MBps connection, so I don't think it was my internet. It could have been the laptop though for slowness on both ends, downloading and communicating with the phone. I would have to look into it further though.
Anyways, thanks for responding to me!
Did you use any other devices via USB port? I know when I did mine I had to delete my USB drivers that way it would go faster and not unmount my gs4 all the time.
Sent from my SGH-I337 using xda app-developers app
Does Kingo work on MG1 firmware ?
Rogers S4 here
salutcemoi said:
Does Kingo work on MG1 firmware ?
Rogers S4 here
Click to expand...
Click to collapse
Don't know until you try.
Sent from my SGH-I337 using xda app-developers app
salutcemoi said:
Does Kingo work on MG1 firmware ?
Rogers S4 here
Click to expand...
Click to collapse
over in the original question thread:
http://forum.xda-developers.com/showpost.php?p=46268786&postcount=58
http://forum.xda-developers.com/showpost.php?p=46150347&postcount=40
build version not listed but rogers s4's all the same. cheers
[email protected] said:
Don't know until you try.
Sent from my SGH-I337 using xda app-developers app
Click to expand...
Click to collapse
xBeerdroiDx said:
over in the original question thread:
http://forum.xda-developers.com/showpost.php?p=46268786&postcount=58
http://forum.xda-developers.com/showpost.php?p=46150347&postcount=40
build version not listed but rogers s4's all the same. cheers
Click to expand...
Click to collapse
thanks
but they dont mention if it's MG1 firmware
easiest root ever!! AT&T MF3 rooted and ready to do safestrap
salutcemoi said:
thanks
but they dont mention if it's MG1 firmware
Click to expand...
Click to collapse
i know. that's why i said "build version not listed" in my post.
It doesn't work anymore on newer 4.3 Firmwares (MJ9 with Changelist:1986587 and newer)
Hello friends,
I found a solution how to have stock permissive kernel without having warranty bit label at boot. In my approach I will explain you how it works.
→ IT WILL WORK ONLY WITH STOCK KERNEL
-> flash newest 4.3 firmware
-> root your S4 using CF-Auto-Root
-> install ES File Explorer or another root file explorer you like
-> remove Samsung KNOX manually ! (see my DE-SAMSUNGNIZER Script which apk's or folders you must delete)
-> install Universal Init.d Support and start the app (Click me)
-> enable init.d [if have problems by enabling init.d, you must have BusyBox before using the app]
-> download this script and copy it to system/etc/init.d using a file explorer
-> set the permissions to 777 (rwxrwxrwx)
-> reboot and enjoy your permissive stock kernel without having any labels at boot :good:
→ Video demonstration ←
Thanks to:
@Chainfire for CF-Auto-Root and SuperSU
@Ryuinferno for his great App
@everyone who motivated me :good:
Once again outstanding work Kaito95 Thank you. I've been using @Ryuinferno UnitD app for awhile. He is an outstanding developer. Thanks @Chainfire as well for making this all possible. Great easy steps for permissive kernel.
Not Working
Im on 4.3 complete upgrade using QBkings video, KNOX completely removed and Init.d enabled with CF AUTO root installed.
as per your OP i moved the txt file to system/etc/init.d and changed permissions as mentioned in your OP.
rebooted also, Triangle away shows counter:21.
Im on 4.3 Galaxy S4 Sprint SPH-L720
Got it figured out.
Counter Set to 0 and
system Official thanks
will it work with S4-I9500 variant also??
Yup
Sent from my SPH-L720 using Tapatalk
Kaito95 said:
-> install Universal Init.d Support and start the app (Click me)
Click to expand...
Click to collapse
When I check this link, it says that it is not compatible with 4.3. What about this?
body150165 said:
When I check this link, it says that it is not compatible with 4.3. What about this?
Click to expand...
Click to collapse
You might wanna see this link for this to work.
http://forum.xda-developers.com/showthread.php?t=1933849
Sent from my SPH-L720 using Tapatalk
This does not trigger the KNOX flag?
Read the OP, Knox is removed manually first.
Sent from my SPH-L720 using Tapatalk
pvinodnayak said:
Read the OP, Knox is removed manually first.
Sent from my SPH-L720 using Tapatalk
Click to expand...
Click to collapse
Yeah and you need root for that, which triggers the knox flag...
Yup
Sent from my SPH-L720 using Tapatalk
And for custom ROMs w/o Knox?
Hi all,
Is it possible that this script works even with Knox app already removed (as in Custom ROMs)?
Swizzy88 said:
Yeah and you need root for that, which triggers the knox flag...
Click to expand...
Click to collapse
But if we use this method there will be no Knox warranty flag in the recovery, as per op said ...
Kaito95 said:
Hello friends,
I found a solution how to have stock permissive kernel without having warranty bit label at boot.
Click to expand...
Click to collapse
Right?
Sent from my SGH-M919 using Tapatalk
Swizzy88 said:
Yeah and you need root for that, which triggers the knox flag...
Click to expand...
Click to collapse
Use this method to root the firmware. Then flash the file using Odin. Read OP carefully.
http://forum.xda-developers.com/showthread.php?t=2498850
Sent from my SPH-L720 using Tapatalk
---------- Post added at 01:41 PM ---------- Previous post was at 01:41 PM ----------
This way Knox is not tripped.
Sent from my SPH-L720 using Tapatalk
pvinodnayak said:
Use this method to root the firmware. Then flash the file using Odin. Read OP carefully.
http://forum.xda-developers.com/showthread.php?t=2498850
Sent from my SPH-L720 using Tapatalk
---------- Post added at 01:41 PM ---------- Previous post was at 01:41 PM ----------
This way Knox is not tripped.
Sent from my SPH-L720 using Tapatalk
Click to expand...
Click to collapse
Does Root De La Vega work on I9505??
Sent from my PurifieD S4
Read the thread, it doesnot work on EXYNOS chip
Sent from my SPH-L720 using Tapatalk
Strange...
I have init.d support but this script don't work on my device(I9505 , MJ9 maded by me)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Any ideas?
this script/command is no longer working on MK8 firmware . still Enforcing...
Does this work on i9500? Since 'warranty bit' label is for the i9500 while the i9505 has a knox 0x1 label
Sent from my GT-I9500 using XDA Premium 4 mobile app
I can't understand
rgshah3 said:
Does this work on i9500? Since 'warranty bit' label is for the i9500 while the i9505 has a knox 0x1 label
Sent from my GT-I9500 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Hi, i'm italian. I didn't understand what does the method. Works on Gt-i9505 (Snapdragon)?
I have a Galaxy S4 with the last firmware 4.3 and root without increase the counter knox.