Related
Hey guys I have a recovery problem. I rooted my O1 and then tried to install cwm using app from market but when I try to enter recovery it starts fastboot Hopefully normal mode works and the phone boots into rom. So I tried reviving it using this thread http://forum.xda-developers.com/showthread.php?t=1088046 but still have the same problem. So what do I have to do ????
I have another question: I found in settings of rom manager erase recovery prior to flashing an.I didn't tick it so do I have to tick it???
Sent from my LG-P500 using xda app-developers app
If your phone isn't stuck in fastboot now can't u just enter recovery by holding power +home +vol down (while switched off) ??? Or is ur problem entring it through Rom manager?
Sent from my LG-P500 using Tapatalk 2
sachin kamboj said:
If your phone isn't stuck in fastboot now can't u just enter recovery by holding power +home +vol down (while switched off) ??? Or is ur problem entring it through Rom manager?
Sent from my LG-P500 using Tapatalk 2
Click to expand...
Click to collapse
I can't enter recovery anyway it just stucks in fastboot
Can I just flash again usin rom manager or rom toolbox????
borchaniz said:
I can't enter recovery anyway it just stucks in fastboot
Can I just flash again usin rom manager or rom toolbox????
Click to expand...
Click to collapse
You dont need to tick Erase Recovery.
Press HOME + VOLUME then power.. keep holding them til you see recovery!!
If it doesnt work.. flash recovery again using Rom Manager.
Also try to get into recovery through rom manager if nothing works!!
I'm having the same issue. Just flashed CWM with Rom Manager today. It worked a few times, but now it's not. I cannot select any option on the list. The back and search buttons blank out the screen except for the rom manager logo (also the background) and if I hit them again, the "cursor" has moved up or down, depending. If I press the power button, it also blanks out the screen except for the logo, but when I press it again, the cursor goes back to the top. The only button that doesn't make it blank out is volume down. Home and Menu buttons do nothing.
Also, doesn't matter if I load recovery manually or through RM.
UPDATE: Managed to get it stuck on the RM Logo. Nothing does anything.
UPDATE: Flashed VM670 Recovery with FlashImageGUI and am getting similar results. Now both volume keys allow for selecting, home and menu allow for selecting with the cleared screen, and power, back, and search do nothing but move the cursor to the top. If I hold the power button, though, the screen flashes and the cursor doesn't move.
I had same problem on my vm670 try using camera button to select . Worked for me
Sent from my LG-P505 using xda premium
Forgot aout those buttons... Voice dial button moves cursor down (VDown moves it up) but camera button does nothing.
a.child said:
Forgot aout those buttons... Voice dial button moves cursor down (VDown moves it up) but camera button does nothing.
Click to expand...
Click to collapse
Don't forget that the camera button is a 2-step button. You have to press it all the way in for it to register in CWM. Also, I'm running CWM 3.2.0.1 and the Volume buttons work for me just fine.
And for the one who couldn't get into recovery, have you tried booting normally, connecting it to your computer, and running this at a command prompt?
adb reboot recovery
Hi,
I tried to restore my Nexus S (european, GT-I9023) which has a broken power button before sending it to Samsung for repair.
I just screwed my ROM flash using Clockworkmod and now my phone only shows a beautiful Google screen.
When I try to use fastboot screen (using vol+/vol-) nothing moves, and even if it moved I wouldn't be able select any option as my power button is broken. I can't also access Odin (vol+ and vol- pressed when the phone is off) as I can't turn off my phone.
What can I do to flash my rom? May I send it to Samsung anyway?
Thanks for your answers!
Txkw said:
Hi,
I tried to restore my Nexus S (european, GT-I9023) which has a broken power button before sending it to Samsung for repair.
I just screwed my ROM flash using Clockworkmod and now my phone only shows a beautiful Google screen.
When I try to use fastboot screen (using vol+/vol-) nothing moves, and even if it moved I wouldn't be able select any option as my power button is broken. I can't also access Odin (vol+ and vol- pressed when the phone is off) as I can't turn off my phone.
What can I do to flash my rom? May I send it to Samsung anyway?
Thanks for your answers!
Click to expand...
Click to collapse
I am also facing the exact same problem. Can someone kindly guide us please?
Switch off. Press Volume Up and plug in the charging cable. Now, see if you tackle with the Fastboot mode.
Sent from my Nexus S using Tapatalk 2
a2zRulz said:
I am also facing the exact same problem. Can someone kindly guide us please?
Click to expand...
Click to collapse
My power button is broken too.
I solved the problem flashing ClockworkMod Touch from Windows Terminal.
DJBhardwaj said:
Switch off. Press Volume Up and plug in the charging cable. Now, see if you tackle with the Fastboot mode.
Sent from my Nexus S using Tapatalk 2
Click to expand...
Click to collapse
He might not be able to. When the power button breaks, it stays in a "on" state and that messed up fastboot as it doesn't let you scroll or initialize properly.
a2zRulz said:
I am also facing the exact same problem. Can someone kindly guide us please?
Click to expand...
Click to collapse
If your rom starts booting (you see a quick flash after initial Google logo) you might be able to ADB from there (while it's not booting and the rom logo is showing, I know weird but often works). Check it out.
Edit: Oh and if you get adb access, then what you want to do is "reboot recovery" to reboot to recovery, and then wipe/flash a rom and whatnot.
polobunny said:
He might not be able to. When the power button breaks, it stays in a "on" state and that messed up fastboot as it doesn't let you scroll or initialize properly.
If your rom starts booting (you see a quick flash after initial Google logo) you might be able to ADB from there (while it's not booting and the rom logo is showing, I know weird but often works). Check it out.
Edit: Oh and if you get adb access, then what you want to do is "reboot recovery" to reboot to recovery, and then wipe/flash a rom and whatnot.
Click to expand...
Click to collapse
You are absolutely right. The phone thinks that the power button is pressed and doesn't let us move up and down using the volume keys.
Also, even if I get adb access after the Google logo, how do I use fastboot mode? I actually wanted to flash a recovery as my Power button doesn't work even in the recovery. Moreover, I can boot into recovery without adb, from inside the rom power menu.
So adb doesn't help here
a2zRulz said:
You are absolutely right. The phone thinks that the power button is pressed and doesn't let us move up and down using the volume keys.
Also, even if I get adb access after the Google logo, how do I use fastboot mode? I actually wanted to flash a recovery as my Power button doesn't work even in the recovery. Moreover, I can boot into recovery without adb, from inside the rom power menu.
So adb doesn't help here
Click to expand...
Click to collapse
What recovery do you currently have? All custom recoveries enable you to scroll with menu and home key, go back with the back key and select with the search key. So if you can get adb while it's "not booting" and reboot to your custom recovery, then you can navigate, mount usb and transfer a rom if needed or flash one that is on your phone.
Edit: Also, I was under the impression you couldn't boot your ROM. If you can, what is it exactly that you are trying to do??
polobunny said:
What recovery do you currently have? All custom recoveries enable you to scroll with menu and home key, go back with the back key and select with the search key. So if you can get adb while it's "not booting" and reboot to your custom recovery, then you can navigate, mount usb and transfer a rom if needed or flash one that is on your phone.
Edit: Also, I was under the impression you couldn't boot your ROM. If you can, what is it exactly that you are trying to do??
Click to expand...
Click to collapse
I have ClockworkMod (CWM) 6.0.2.5 Non-Touch from this thread:
Code:
http://forum.xda-developers.com/showthread.php?t=2032337
I flashed this earlier when my power button was working. And I have tried all the capacitive buttons. None of them work with this recovery. That's why I was looking forward to flashing a touch based recovery.
a2zRulz said:
I have ClockworkMod (CWM) 6.0.2.5 Non-Touch from this thread:
Code:
http://forum.xda-developers.com/showthread.php?t=2032337
I flashed this earlier when my power button was working. And I have tried all the capacitive buttons. None of them work with this recovery. That's why I was looking forward to flashing a touch based recovery.
Click to expand...
Click to collapse
From the same thread you can simply download any of these (highly suggest ClockworkMod (CWM) 5.8.0.2 Touch, one if not the most reliable) and flash them from within your current CWM.
polobunny said:
From the same thread you can simply download any of these (highly suggest ClockworkMod (CWM) 5.8.0.2 Touch, one if not the most reliable) and flash them from within your current CWM.
Click to expand...
Click to collapse
Dear sir,
Please understand. That's what I am trying to tell you. I cannot use power button or any other button to select anything in the recovery. So how will I install this one?
a2zRulz said:
Dear sir,
Please understand. That's what I am trying to tell you. I cannot use power button or any other button to select anything in the recovery. So how will I install this one?
Click to expand...
Click to collapse
Ok let's get this right
What is your goal? Flash a different recovery? Then you can flash a recovery from within something such as ROM Manager if your rom still boots.
Yes sir, my goal is to flash a touch based recovery just so that I can flash new ROMs and kernels without the help of the power button.
Koushik charges for in-app flashing of CWM Touch which is otherwise free. So that's the main issue here. I guess I'll have to live with it
a2zRulz said:
Yes sir, my goal is to flash a touch based recovery just so that I can flash new ROMs and kernels without the help of the power button.
Koushik charges for in-app flashing of CWM Touch which is otherwise free. So that's the main issue here. I guess I'll have to live with it
Click to expand...
Click to collapse
Ok.
You can use this Flash Image GUI to flash a recovery of your choice from within Android then:
http://forum.xda-developers.com/showthread.php?t=1453617
It's free. Make sure to download the right recovery for your device and select recovery image in Flash Image GUI.
polobunny said:
Ok.
You can use this Flash Image GUI to flash a recovery of your choice from within Android then:
http://forum.xda-developers.com/showthread.php?t=1453617
It's free. Make sure to download the right recovery for your device and select recovery image in Flash Image GUI.
Click to expand...
Click to collapse
You sir, are my hero... Many thanks for this :highfive: :victory:
If you are flashing a touch version of CWM recovery, I highly suggest v6.0.1.0. The later version (up to 6.0.2.5) have a bug that will make you unable to mount the SD card within the recovery. Otherwise TWRP is very interesting, but backups made with CWM are not compatible with TWRP.
Thanks, I'll try TWRP this time
I rooted with Casual and selected TWRP for Custom Recovery. Everything seems to be working fine, but I have been unable to start TWRP. With phone off, I hold volume down + Power. The phone will vibrate every few seconds until I release the power button. Then it starts in normal Android mode. Am I trying to start this in the wrong way or is there something messed up with TWRP on my phone?
joekiv said:
I rooted with Casual and selected TWRP for Custom Recovery. Everything seems to be working fine, but I have been unable to start TWRP. With phone off, I hold volume down + Power. The phone will vibrate every few seconds until I release the power button. Then it starts in normal Android mode. Am I trying to start this in the wrong way or is there something messed up with TWRP on my phone?
Click to expand...
Click to collapse
Until you flash a rom that has a custom menu to boot to recovery you have to hold volume up plus the home key while hitting the power button. Let the power button go but keep holding the volume up and home key then TWRP should start up.
Edit: You can also download Quick Boot by Sirius app from the play store and see if that gets you to your recovery until you get a rom on that let's you boot straight to recovery.
TheAfroSamurai said:
Until you flash a rom that has a custom menu to boot to recovery you have to hold volume up plus the home key while hitting the power button. Let the power button go but keep holding the volume up and home key then TWRP should start up.
Edit: You can also download Quick Boot by Sirius app from the play store and see if that gets you to your recovery until you get a rom on that let's you boot straight to recovery.
Click to expand...
Click to collapse
The buttons worked BUT TWRP isn't. I have an Android Robot, out for the count, he is on his back. The recovery must be messed up.
joekiv said:
The buttons worked BUT TWRP isn't. I have an Android Robot, out for the count, he is on his back. The recovery must be messed up.
Click to expand...
Click to collapse
That's the stock recovery. Download too manager and install twrp from the settings menu
Sent from my SCH-I535
jhoutz said:
That's the stock recovery. Download too manager and install twrp from the settings menu
Sent from my SCH-I535
Click to expand...
Click to collapse
Thanks, but I already tried redoing TWRP with Goo Manager. Program ran fine & finished, but when I rebooted into recovery I got the dead Android Robot again. Don't know how to proceed at this point. May try re-running Casual. Still reading everything I can find on this situation before doing anything.
From a powered off state, hold volume UP, home, and power. Let go of the power button when the phone vibrates.
Sent from my SCH-I535 using Tapatalk 4
SlimSnoopOS said:
From a powered off state, hold volume UP, home, and power. Let go of the power button when the phone vibrates.
Sent from my SCH-I535 using Tapatalk 4
Click to expand...
Click to collapse
Done that multiple times, same result - Android on back. Tried redoing TWRP with Goo manager, also Checked on lock/unlock with Ez Unlock - got "status unknown". Did not risk pressing either 'Lock' or 'Unlock' and exited app. Not sure what to do next.
Phone is working. Can make calls, messages, use & install apps and change settings. SuperSU is working, TB Pro is working. I did TB Backups & uninstalled multiple locked apps (Bloatware) before discovering that I cannot get into a working TWRP Recovery.
Any suggestions would be greatly appreciated.
joekiv said:
Done that multiple times, same result - Android on back. Tried redoing TWRP with Goo manager, also Checked on lock/unlock with Ez Unlock - got "status unknown". Did not risk pressing either 'Lock' or 'Unlock' and exited app. Not sure what to do next.
Phone is working. Can make calls, messages, use & install apps and change settings. SuperSU is working, TB Pro is working. I did TB Backups & uninstalled multiple locked apps (Bloatware) before discovering that I cannot get into a working TWRP Recovery.
Any suggestions would be greatly appreciated.
Click to expand...
Click to collapse
Odin flash a TWRP tar. Uncheck auto-reboot, once it successfully flashes, pull the battery then try booting directly into twrp.
SlimSnoopOS said:
Odin flash a TWRP tar. Uncheck auto-reboot, once it successfully flashes, pull the battery then try booting directly into twrp.
Click to expand...
Click to collapse
Will Odin work if I am unable to get the phone into a working bootloader?
joekiv said:
Will Odin work if I am unable to get the phone into a working bootloader?
Click to expand...
Click to collapse
It should. There's download mode and there's recovery mode. You are having issues flashing a recovery. I don't see anything in your prior posts about difficulty accessing anything else.
SlimSnoopOS said:
It should. There's download mode and there's recovery mode. You are having issues flashing a recovery. I don't see anything in your prior posts about difficulty accessing anything else.
Click to expand...
Click to collapse
Your link above for the "TWRP Tar" goes to a page that instructs to go into odin mode on the 'device' by pressing Vol down, home and power. When I do that I get the Android Robot standing and a message that says "Downloading Custom, do not turn off device". At this point no buttons work and I have no choices do do anything and have to do a battery pull to get out. If I go in any other way I get the Robot on its back.
EDIT: You link was only for the purpose of getting the tar file, not a suggestion to use Odin Mobile. I think that all of the time I spent reading about this issue is affecting my brain.
joekiv said:
Your link above for the "TWRP Tar" goes to a page that instructs to go into odin mode on the 'device' by pressing Vol down, home and power. When I do that I get the Android Robot standing and a message that says "Downloading Custom, do not turn off device". At this point no buttons work and I have no choices do do anything and have to do a battery pull to get out. If I go in any other way I get the Robot on its back.
Click to expand...
Click to collapse
Yes, you use Odin from a computer and boot your phone into download mode then connect it via usb to flash files. Based on your post, you haven't used Odin before have you?
Edit: If it makes it easier, this thread has a [HOW TO] for Odin and the process of flashing tar files as well.
SlimSnoopOS said:
Yes, you use Odin from a computer and boot your phone into download mode then connect it via usb to flash files. Based on your post, you haven't used Odin before have you?
Edit: If it makes it easier, this thread has a [HOW TO] for Odin and the process of flashing tar files as well.
Click to expand...
Click to collapse
No I haven't, but I realized (slowly) what you meant and edited my last post, Probably while you were posting this.
joekiv said:
No I haven't, but I realized (slowly) what you meant and edited my last post, Probably while you were posting this.
Click to expand...
Click to collapse
Ahh, I see that now. Also, per your earlier statement about EZ Unlock. If you have v1.2, just tapping unlock does not harm the phone in any capacity. In fact, fact I encourage you to do so just before using Odin (from a computer) to flash TWRP or CWM. EZ Unlock v1.2 only unlocks the bootloader.
Sent from my SCH-I535 using Tapatalk 4
Did your suggestion and Ran Ez Unlock again and pressed 'Unlock', Status now says UNlocked. Now that it does I'm going to give Goo Manager 1 more shot at fixing TWRP before I run Odin with the TWRP Tar you linked to.
joekiv said:
Did your suggestion and Ran Ez Unlock again and pressed 'Unlock', Status now says UNlocked. Now that it does I'm going to give Goo Manager 1 more shot at fixing TWRP before I run Odin with the TWRP Tar you linked to.
Click to expand...
Click to collapse
Cool, let me know what happens.
Sent from my SCH-I535 using Tapatalk 4
SlimSnoopOS said:
Cool, let me know what happens.
Sent from my SCH-I535 using Tapatalk 4
Click to expand...
Click to collapse
Ran Goo Manager, but no success. Put phone in download mode and used Odin to flash recovery with openrecovery-twrp-2.6.1.0-d2vzw.tar. Odin ran through to end and showed "Pass" and rebooted. Used Vol UP, Home & Power keys to enter TWRP got the Robot on his back with a Red Exclamation mark with this message below:
# Manual Mode #
"...Applying Multi ...CSC
Applying the CSC Code: VZW
Successfully applied Multi-CSC
I have 6 choices on this screen.
1 Reboot System Now (I pressed power and phone booted normally)
2 Apply Update from ADB
3.Apply Updated from External Storage
4 Wipe Data/Factory Reset
5 Wipe Cache Partition
6 Apply update from Cache
So I still can't get into TWRP and the only difference is now the Red Exclamation Point.
Did you uncheck "auto reboot" and pull the battery and boot into TWRP like I said before?
Here's a third method if the above does not work. Download EZ Recovery from the Play Store. Once you've done so, you can use my prior link from Rootzwiki and download a TWRP img (image) and use EZ Recovery to install that img file. For this method, make sure to use TWRP.img. Do not use the "tar" file, for this method, tar files are for Odin only.
Sent from my SCH-I535 using Tapatalk 4
SlimSnoopOS said:
Did you uncheck "auto reboot" and pull the battery and boot into TWRP like I said before?
Here's a third method if the above does not work. Download EZ Recovery from the Play Store. Once you've done so, you can use my prior link from Rootzwiki and download a TWRP img (image) and use EZ Recovery to install that img file. For this method, make sure to use TWRP.img. Do not use the "tar" file, for this method, tar files are for Odin only.
Sent from my SCH-I535 using Tapatalk 4
Click to expand...
Click to collapse
SUCCESS! Flashed the recovery again, BUT this time with Auto reboot unchecked as you previously told me to do and that I missed. Thank you, not only for your help, but for all your patience as well.
joekiv said:
SUCCESS! Flashed the recovery again, BUT this time with Auto reboot unchecked as you previously told me to do and that I missed. Thank you, not only for your help, but for all your patience as well.
Click to expand...
Click to collapse
Ahh, sweet! haha glad I could help you out!
Does anyone know where I can find the stock recovery image for Blu Advanced 4.0. I tried to install CWM and it didnt take and now I dont have any recovery options. I want to reset my phone to factory But it is not working!!! If anyone can help please reply to this!!!! My phone is rooted and running Android 4.2.2
Thanks,
Eric
Hi, I am having the same problem, did you get the recovery back?
i am getting this phone, and i will try to dump the system image
emensch said:
Does anyone know where I can find the stock recovery image for Blu Advanced 4.0. I tried to install CWM and it didnt take and now I dont have any recovery options. I want to reset my phone to factory But it is not working!!! If anyone can help please reply to this!!!! My phone is rooted and running Android 4.2.2
Thanks,
Eric
Click to expand...
Click to collapse
BobbyAddams said:
Hi, I am having the same problem, did you get the recovery back?
Click to expand...
Click to collapse
Here are the system boot and recovery images
https://docs.google.com/file/d/0BwvFJ8wh88noVkE3SzFaU0I4NHM/edit?usp=docslist_api
Sent from my Venue 8 3830 using XDA Free mobile app
How can you get into recovery? I'm in a loop.
cma371 said:
How can you get into recovery? I'm in a loop.
Click to expand...
Click to collapse
1. Turn off the phone
2. press the volume up and down bottons at the same time
3. wait till you see the android logo
4. now your in recovery
Dead android
joanthanmajh said:
1. Turn off the phone
2. press the volume up and down bottons at the same time
3. wait till you see the android logo
4. now your in recovery
Click to expand...
Click to collapse
Dead android with the door open and a red triangle with exclamation mark.
Cant even wipe the cache partition.
Cant 'reboot system now'.
Had to do the battery pull.
Started fine.
joanthanmajh said:
1. Turn off the phone
2. press the volume up and down bottons at the same time
3. wait till you see the android logo
4. now your in recovery
Click to expand...
Click to collapse
Nope! To get into recovery mode (at least for the BLU Advance 4.0L A010U) you do the following:
1. Press (and keep holding) the Volume button in the middle so that both UP and DOWN are simultaneously pressed
2. Press (and keep holding) the Power button until you see on the screen two white lines saying:
Recovery Mode: Volume Up
Factory Mode: Volume Down
3. Press Volume UP once (do not hold). The intro logo "BLU Bold like us" will show up for a few seconds. Then you will see a black screen with a dead android, its belly open, a red exclamation mark and a line of white letters below saying:
No command
4. Press once the power button.
You are now in system recovery mode: Use Volume Up/Volume Down to select what you want to do and use the menu button on the lower-left to enter that command.
I need NVRAM file for my BLU Advance L A010. I now have invalid IMEI and I think it's because the phone was formatted but they never reflashed the entire ROM, just system, recovery, boot etc. So phone boots up fine but no nvram is present. If I could get nvram file for this phone, I can update the IMEI using MTK Engineering.
Can anyone help? Or does anyone know where I can get the complete stock ROM for this device. Most stock BLU ROMs posted online only provide the basic images needed to recover the device.
Had a problem. Hope someone with experience can give me a few answers.
Nave new t-mobile Note 3, SM-N900T. Stock 4.4.2 KitKat Touchwiz rooted.
Rooted to enable SDFix to use SD card as I want to use it.
Everything great! No problems.
Thought it would be wise to have a Nanoid backup.
Opened Rom Manager and made One change in prefrences. I set it for external SD card storage. (mistake?)
Went to 'Backup current Rom' in Rom manager, started it and it started to reboot. Shut down and restarted in a 'Recovery' boot loop??
No matter what I did, Tried holding power, up volume and home button, nothing. Boot loop continued. Removed battery, waited, as soon as I re-installed battery it instantly went back into recovery boot loop.
I don't know what I did, I kept removing battery and trying again and again and all of a sudden, it booted up back to KitKat and now everything is working great again. No problem on any standard reboot.
What happened? I have used this same set up on my S3 and never had a problem.
I would like to backup the current setup for any future problems. But now, I'm afraid to even try.
I removed Rom Manager and re-installed. Made sure that the storage location was reset to internal and it should be OK??
What did I do when I got out of the Recovery boot loop??
So, afraid to try again. Don't want the boot loop again.
rspilot1 said:
Had a problem. Hope someone with experience can give me a few answers.
Nave new t-mobile Note 3, SM-N900T. Stock 4.4.2 KitKat Touchwiz rooted.
Rooted to enable SDFix to use SD card as I want to use it.
Everything great! No problems.
Thought it would be wise to have a Nanoid backup.
Opened Rom Manager and made One change in prefrences. I set it for external SD card storage. (mistake?)
Went to 'Backup current Rom' in Rom manager, started it and it started to reboot. Shut down and restarted in a 'Recovery' boot loop??
No matter what I did, Tried holding power, up volume and home button, nothing. Boot loop continued. Removed battery, waited, as soon as I re-installed battery it instantly went back into recovery boot loop.
I don't know what I did, I kept removing battery and trying again and again and all of a sudden, it booted up back to KitKat and now everything is working great again. No problem on any standard reboot.
What happened? I have used this same set up on my S3 and never had a problem.
I would like to backup the current setup for any future problems. But now, I'm afraid to even try.
I removed Rom Manager and re-installed. Made sure that the storage location was reset to internal and it should be OK??
What did I do when I got out of the Recovery boot loop??
So, afraid to try again. Don't want the boot loop again.
Click to expand...
Click to collapse
Hi. What recovery are you using?
If you haven't installed a custom recovery, then that explains your issue. Basically, the app scheduled a custom recovery script which kept failing in the stock recovery. You should normally be able to reboot into the system holding the power button, thus skipping going to recovery. This also resets the recovery script so everything is back to normal.
Nandroid is normally only possible using a custom recovery like TWRP or CWM.
I saw that you might be able to perform a Nandroid without restarting the phone (so without a custom recovery) using this app: https://play.google.com/store/apps/details?id=com.h3r3t1c.onnandbup&hl=en
I have never tried it. Looks promising though.
But please note that you won't be able to restore the backup without a custom recovery.
EDIT: If you do have a custom recovery, why not boot in recovery mode and make the backup from there?
Cheers
Recovery Boot Loop Problem
I have CWM installed. Setup thru Rom Manager as I have done before on other phones.
Tried it again, same thing. Over and over. Constant reboot. Dosen't matter if I hold the power button or try different ways, same thing.
It says: Recovery booting
Recovery is not seandroid enforcing
Set warranty bit:recovery
If I remove battery and wait a couple of minutes, I can install battery and it dosen't start till I hold power button.
So I held volume down, home button and power button and booted into download mode. From there I cancelled and it rebooted normally.
Everything I've read on boot loops always say 'boot into recovery'. I only wish I could. That's the bootloop.
Any idea on what's wrong?
Thank you for your time and trouble.
rspilot1 said:
I have CWM installed. Setup thru Rom Manager as I have done before on other phones.
Tried it again, same thing. Over and over. Constant reboot. Dosen't matter if I hold the power button or try different ways, same thing.
It says: Recovery booting
Recovery is not seandroid enforcing
Set warranty bit:recovery
If I remove battery and wait a couple of minutes, I can install battery and it dosen't start till I hold power button.
So I held volume down, home button and power button and booted into download mode. From there I cancelled and it rebooted normally.
Everything I've read on boot loops always say 'boot into recovery'. I only wish I could. That's the bootloop.
Any idea on what's wrong?
Thank you for your time and trouble.
Click to expand...
Click to collapse
Have you tried booting directly into recovery?
So just shut off your phone and then open it by holding volume up + home + power. It should boot into recovery. If it doesn't, I recommend installing cwm or TWRP using Odin instead of Rom manager.
Might be a problem with your current recovery.
Sent from my GT-I9505
Recovery Boot Loop Problem
andreiav said:
Have you tried booting directly into recovery?
So just shut off your phone and then open it by holding volume up + home + power. It should boot into recovery. If it doesn't, I recommend installing cwm or TWRP using Odin instead of Rom manager.
Might be a problem with your current recovery.
Sent from my GT-I9505
Click to expand...
Click to collapse
Yes, I tried. Does the same thing.
I've never used Odin. All the info I've read mentioned downloading USB drivers and using different .tar files. Checking this and that.
Nothing I've ever done.
No experience with it.
Never had a reason before to use it.
Every instruction website I've read all seem to be different.
I'm gonna have to find out, huh? lol
I've got Odin on my computer, and have the CWM 6 zipped file.
Will do some research.
Thanks
rspilot1 said:
Yes, I tried. Does the same thing.
I've never used Odin. All the info I've read mentioned downloading USB drivers and using different .tar files. Checking this and that.
Nothing I've ever done.
No experience with it.
Never had a reason before to use it.
Every instruction website I've read all seem to be different.
I'm gonna have to find out, huh? lol
I've got Odin on my computer, and have the CWM 6 zipped file.
Will do some research.
Thanks
Click to expand...
Click to collapse
No problem.
A few tips with odin:
-If you have Kies installed, you don't need to install other drivers.
-The file you flash with Odin should have tar or tar.md5 extension
-you have to activate USB debugging from developer options.
-boot your phone into download mode
-run Odin as administrator
-connect your phone. you should see the text Added in Odin. If don't see it, you need drivers.
-you should make sure only auto reboot and f. Reset time are checked
-you should put the file in Pda or Ap(if using latest version)
Click start and wait until it finishes. It will restart itself if you checked auto reboot.
That's about it. It's very safe and easy to use.
Watch some videos on YouTube. You will definitely find some.
Cheers
Sent from my GT-I9505
Recovery Boot Loop Problem
andreiav said:
No problem.
A few tips with odin:
-If you have Kies installed, you don't need to install other drivers.
-The file you flash with Odin should have tar or tar.md5 extension
-you have to activate USB debugging from developer options.
-boot your phone into download mode
-run Odin as administrator
-connect your phone. you should see the text Added in Odin. If don't see it, you need drivers.
-you should make sure only auto reboot and f. Reset time are checked
-you should put the file in Pda or Ap(if using latest version)
Click start and wait until it finishes. It will restart itself if you checked auto reboot.
That's about it. It's very safe and easy to use.
Watch some videos on YouTube. You will definitely find some.
Cheers
Sent from my GT-I9505
Click to expand...
Click to collapse
Thank you, that answered some questions.
you've been a great help.
Recovery Boot Loop Problem
rspilot1 said:
Thank you, that answered some questions.
you've been a great help.
Click to expand...
Click to collapse
Update: The install of CWM with Odin seemed to be successful. Still have same problem.
I believe the problem must be somewhere else.
Something is stopping the recovery boot. More research ahead.
When I find out more, will post here and give update.
rspilot1 said:
Update: The install of CWM with Odin seemed to be successful. Still have same problem.
I believe the problem must be somewhere else.
Something is stopping the recovery boot. More research ahead.
When I find out more, will post here and give update.
Click to expand...
Click to collapse
Strange. You could try TWRP instead of CWM. I use TWRP and really like it:
Here is the download link for your device: http://www.techerrata.com/file/twrp2/hltetmo/openrecovery-twrp-2.7.2.0-hltetmo-4.4.img.tar
This is the Odin flashable recovery.
Here is TWRP page: http://teamw.in/project/twrp2/
EDIT: One more thing. Are these the exact steps you are following when booting into recovery?
"To access recovery mode on your Note 3, turn off the device and press Volume Up+Home+Power buttons at the same time for about 4-6 seconds. When the screen lights up and you see the Samsung logo, release the Power button but keep Volume Up+Home keys pressed until you see the recovery menu screen"
Cheers
Recovery Boot Loop Problem
andreiav said:
Strange. You could try TWRP instead of CWM. I use TWRP and really like it:
Here is the download link for your device: http://www.techerrata.com/file/twrp2/hltetmo/openrecovery-twrp-2.7.2.0-hltetmo-4.4.img.tar
This is the Odin flashable recovery.
Here is TWRP page: http://teamw.in/project/twrp2/
EDIT: One more thing. Are these the exact steps you are following when booting into recovery?
"To access recovery mode on your Note 3, turn off the device and press Volume Up+Home+Power buttons at the same time for about 4-6 seconds. When the screen lights up and you see the Samsung logo, release the Power button but keep Volume Up+Home keys pressed until you see the recovery menu screen"
Cheers
Click to expand...
Click to collapse
Yes, if I use the buttons, the download mode comes up saying 'Boot failed'. That's holding the vol. button 'up'. If I hold vol. down, it loads download mode correctly.
If I try to enter recovery thru Rom Manager, Recovery tries to start and the boot loop starts. ??
I may try TWRP. I've heard a lot about it.
Thanks for the links.
Recovery Boot Loop Problem
rspilot1 said:
Yes, if I use the buttons, the download mode comes up saying 'Boot failed'. That's holding the vol. button 'up'. If I hold vol. down, it loads download mode correctly.
If I try to enter recovery thru Rom Manager, Recovery tries to start and the boot loop starts. ??
I may try TWRP. I've heard a lot about it.
Thanks for the links.
Click to expand...
Click to collapse
Is changing over to TWRP as simple as installing CWM on Odin??
Just install and try?
rspilot1 said:
Is changing over to TWRP as simple as installing CWM on Odin??
Just install and try?
Click to expand...
Click to collapse
Yep. 5 minutes process at most
Sent from my GT-I9505
Recovery Boot Loop Problem
andreiav said:
Yep. 5 minutes process at most
Sent from my GT-I9505
Click to expand...
Click to collapse
Success!! TWRP works!!
Installed with Odin and it started up fine. Backed up system on my Ext. SD card and rebooted back to OS.
Perfect!
Don't know what happened to CWM but problem is solved thanks to your help.
If your ever in Winter Haven, Fl area, I'll buy you a steak dinner.
Thank you.
rspilot1 said:
Success!! TWRP works!!
Installed with Odin and it started up fine. Backed up system on my Ext. SD card and rebooted back to OS.
Perfect!
Don't know what happened to CWM but problem is solved thanks to your help.
If your ever in Winter Haven, Fl area, I'll buy you a steak dinner.
Thank you.
Click to expand...
Click to collapse
Awesome! Really glad it worked.
Cheers!
Sent from my GT-I9505