hi all
can some one please help ive recently jjst flashed an ics rom coming from jelly bean and i get thiis see attachment
its booting up into download mode (bootloop saying downloading do not power off) and is not accepting any odin flash either. ive tried flashing latest firmware from sammobile but that has not done the job, this is when it says downloading in dowoad mode.
also using galaxy tab gt n8010 wifi 16gb
also im thinking i need a pit file to recover this as ive also got no way to access clock recovery mode.
any assistance greatly appreciated thank you all
linuxnubee said:
hi all
can some one please help ive recently jjst flashed an ics rom coming from jelly bean and i get thiis see attachment
its booting up into download mode (bootloop saying downloading do not power off) and is not accepting any odin flash either. ive tried flashing latest firmware from sammobile but that has not done the job, this is when it says downloading in dowoad mode.
also using galaxy tab gt n8010 wifi 16gb
also im thinking i need a pit file to recover this as ive also got no way to access clock recovery mode.
any assistance greatly appreciated thank you all
Click to expand...
Click to collapse
Any sollution found yet? Maybe by flashing a complete new stock rom (JB) with modem, CSC and PIT file? Through Odin that is?
szantinge said:
Any sollution found yet? Maybe by flashing a complete new stock rom (JB) with modem, CSC and PIT file? Through Odin that is?
Click to expand...
Click to collapse
yes after i reset it back to stock firmware sent it.back to sammy who did their magic
Could you explain what you did or what stock rom you used with pit file? I have the same problem and mine gives grey lines like yours and cant acces cwm or power-volume up and also says download do not turn of target. Tried allot but says no pit file....thanks
Hello Linuxnubee,
Thanks for the reply. One more question. Did you have it rooted before sending it back or before flashing anything? If so how did you remove root?
Thanks again!
Sent from my GT-N7100 using xda premium
szantinge said:
Hello Linuxnubee,
Thanks for the reply. One more question. Did you have it rooted before sending it back or before flashing anything? If so how did you remove root?
Thanks again!
Sent from my GT-N7100 using xda premium
Click to expand...
Click to collapse
Yeah that's good one too!! I want to know that also if possible...
Yes i had root but was able to flash original firmware back to it so it said official thankfully sammy didnt notice it was rooted but when i took it back to shop they knew lol but as it under warrenty and i pointed out hardware showing them that it didnt happen every boot only most of them they sent it off and it came back.
unfortunately they put jellybean on it even though it had ics which is what i said to put back on it.
Related
Hello, I have samsung nexus s i9023
I think i bricked my ns. This happened while i was trying to return the the base room using odin. I Mistakenly flash incorrect rom With odin for i9020 and now the phone is dead not respond in any mode (download,recovery), but if i read it from odin! . Is there is any way to fix it?
hoba_fci said:
Hello, I have samsung nexus s i9023
I think i bricked my ns. This happened while i was trying to return the the base room using odin. I Mistakenly flash incorrect rom With odin for i9020 and now the phone is dead not respond in any mode (download,recovery), but if i read it from odin! . Is there is any way to fix it?
Click to expand...
Click to collapse
you have go to downloade mode, you won't see anything, but you are in there! and flash the correct one for i9023 !
Sent from my Nexus S using XDA Premium App
Borky_16 said:
you have go to downloade mode, you won't see anything, but you are in there! and flash the correct one for i9023 !
Sent from my Nexus S using XDA Premium App
Click to expand...
Click to collapse
Thank you , but I tried this I9023_XEN_I9023XXKD1_.zip.html
but it didn't work , i don't know why. most of the time the odin show to me REST instead of Based .
Can you guide me how to go back to the base room using odin and what is the correct one to use?
hoba_fci said:
Hello, I have samsung nexus s i9023
I think i bricked my ns. This happened while i was trying to return the the base room using odin. I Mistakenly flash incorrect rom With odin for i9020 and now the phone is dead not respond in any mode (download,recovery), but if i read it from odin! . Is there is any way to fix it?
Click to expand...
Click to collapse
funny....i have a i9020a and i mistakenly flash i9023 rom with odin
now my phone is dead and not responin download or recovery mode .. i cant even turn it on now nor my pc detects it ......so odin cant even read it
any idea??any way to fix it ?
you tried to flash a html file to your phone, and it didn't work?
boakun said:
you tried to flash a html file to your phone, and it didn't work?
Click to expand...
Click to collapse
what html file?
hoba_fci said:
Thank you , but I tried this I9023_XEN_I9023XXKD1_.zip.html
but it didn't work , i don't know why. most of the time the odin show to me REST instead of Based .
Can you guide me how to go back to the base room using odin and what is the correct one to use?
Click to expand...
Click to collapse
was referring to this
Bricked my sumsung nexus s i9020
my phone is not responding by pressing power key or volume key its show totally blank ...no response i have also checked my battery and its in good proper condition .....i think it is a software problem.....and there any way to solve this problem.
I just flashed the one click ics leak. it worked okay, but it wasnt stable enough for me. So i want to go back to Gingerbread and wait for the official release. Im new to this rooting stuff. This was actually my first time doing it. So if someone could give me step by step directions ide greatly appreciate it. Im not stupid but i am new. I tried one way on getting back to stock http://forum.xda-developers.com/showthread.php?t=1342348 it worked but it wouldnt let me update to 3.6 for one and two it tripped my flash counter !!!! so now im screwed on my warranty. Look, all i want is to go back to stock. please help me guys. Step by step and links please. thanks.
Did you Odin the original recovery? Or do you still have CWM? If you still have CWM you can use the file from this link to reset your flash counter. http://forum.xda-developers.com/showthread.php?t=1575712
Sent from my SAMSUNG-SGH-I727 using XDA
The only thing i know hoe to do it pull up odin, put the tar file in pda and hit start. But i used the one click thigh for the ics i flashed. The one click is different then odin. But does anyone have just a stock file? Like completely stock like nothing ever happened? When i get back to stock or if i get back to stock cant i just recover my back-up? lol plz and thank you guys
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
This is what happens when you don't read and just start flashing away with the first thing you can find. I wanna help, but I almost feel like I shouldn't. I mean, if you just read the stickies you would know how to fix this.
If u look through the threads I believe Konane has a thread for returning to stock..but there is a way..not sure of the exact step order but using Odin flash stock tar file then the reset flash count...then the stock recovery..I'll look to see if I can find a link.
Sent from my ICE Cream Sammy Skyrocket-I727 using xda premium
Under skyrocket Development under stickies Its KOnane return to stock
Sent from my SAMSUNG-SGH-I727 using xda premium
what?
i didnt start flashing away. i backed out of rooting 5 times before i did it because i COMPLETLY sure on what i was doing. and i already did the konan tutorial and yes it does work. but it wont let you get at&t updates. and thats a big problem. from what i was reading about konan's tar is that it wasnt a official stock gingerbread. i went to sammobile to get the official stock file. and i did but the file is in MD5 format and i wasnt sure if i could just put that in odin under pda and go about or not. you guys know? but i DID do sooo much reading and researching before i rooted. thanks guys i really appreciate it. you have no idea
feelinfroggy23 said:
i didnt start flashing away. i backed out of rooting 5 times before i did it because i COMPLETLY sure on what i was doing. and i already did the konan tutorial and yes it does work. but it wont let you get at&t updates. and thats a big problem. from what i was reading about konan's tar is that it wasnt a official stock gingerbread. i went to sammobile to get the official stock file. and i did but the file is in MD5 format and i wasnt sure if i could just put that in odin under pda and go about or not. you guys know? but i DID do sooo much reading and researching before i rooted. thanks guys i really appreciate it. you have no idea
Click to expand...
Click to collapse
Yes you can, sammobile is complete. Just extract from the zip and flash in odin
I had to install cwm to my device after flashing back to stock and flash the uckk1 radio and use the reset flash counter zip. Then I flashed stock cwm in Odin rebooted and was able to receive the update to 2.3.6. Which breaks wallpaper scrolling. My only grip about it.
Just flash the stock radio that will solve your problem of not receiving ota updates.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
read this http://forum.xda-developers.com/showthread.php?t=1652398, it will tell u had to restore to stock and might reset ur counter, if counter is not reset there is a fix for that too now
hi, to try the new 4.1.2 i flashed the usa rom for n8013 on my n8010 uk, afterwards i flashed back the stock 4.0.4 uk one, but my device now says that the device name is n8013, and i have a custom binary count, i used odin through out,
now when i look for updates i get a message saying that the device has been modified and i am not eligible for updates, i cant understand what has happened, can anyone help me getting back to n8010 and a official rom
thanks
If flashing the N8010 rom didn't fix it, it should - make sure you are using an N8010 rom, then the only other way I know of is to edit the build.prop. But you need to be rooted to do that.
Hi. Yes i tried it but didnt work. I got the firmware from sammobile. Now when i used triangle away it left me with 1 count which probably means that i am still on n8013 stock recovery. Any ideas where i could get the n8010 stock recovery from..
Sent from my Nexus 4 using XDA Premium HD app
ashvirk said:
Hi. Yes i tried it but didnt work. I got the firmware from sammobile. Now when i used triangle away it left me with 1 count which probably means that i am still on n8013 stock recovery. Any ideas where i could get the n8010 stock recovery from..
Sent from my Nexus 4 using XDA Premium HD app
Click to expand...
Click to collapse
Its part of the firmware not separate . Flash a firmware you get stock for all models recovery .
jje
OK so I got here my p6200 rooted and then aceesed my recovery menu then I did a FULL WIPE
after that It reboot it and caused a BOOTLOOP (cant even turn it off keeps restarting so i need to drain it to get it OFF)
and so my problem is I am quite new with reflashing firmwares though i had already flashed firmware using odin with my galaxy y
and now I have hard time finding the Files Needed to reflash my firmware in this p6200
its quite complicated than i thought because one time i downloaded a firmware which is 600mb or so and i found that it has only one file
I remember that I need 4 files ....I think I need those 4 to for me to be able to flash the firmware am I right?
Sorry im pretty new with this
(I can Still access recovery menu and Download mode)
rhazxor said:
OK so I got here my p6200 rooted and then aceesed my recovery menu then I did a FULL WIPE
after that It reboot it and caused a BOOTLOOP (cant even turn it off keeps restarting so i need to drain it to get it OFF)
and so my problem is I am quite new with reflashing firmwares though i had already flashed firmware using odin with my galaxy y
and now I have hard time finding the Files Needed to reflash my firmware in this p6200
its quite complicated than i thought because one time i downloaded a firmware which is 600mb or so and i found that it has only one file
I remember that I need 4 files ....I think I need those 4 to for me to be able to flash the firmware am I right?
Sorry im pretty new with this
(I can Still access recovery menu and Download mode)
Click to expand...
Click to collapse
May i know on what rom did you wipe your tab? If on ICS.. you're on a very BIG trouble..
Sent from my GT-P6200 using XDA Premium HD app
theejay0625 said:
May i know on what rom did you wipe your tab? If on ICS.. you're on a very BIG trouble..
Sent from my GT-P6200 using XDA Premium HD app
Click to expand...
Click to collapse
Well i think.its on honeycomb because i bought it last year and i didnt do any updates
And my android version is 3.+ not 4.+ sorry cant hardly remember it
What will happen IF Im on ics?
Can I still Fix it? Well im on honeycomb
rhazxor said:
What will happen IF Im on ics?
Can I still Fix it? Well im on honeycomb
Click to expand...
Click to collapse
You will brick your tab if you wipe from stock ICS recovery.. good thing your on HC.. usually when i flash HC and got a bootloop.. the solution is wipe cache and wipe partition.. did u try doing that again? Or flash HC again then wipe cache and partion.. wiping from HC doesnt brick your tab.. but im wondering what caused the bootloop
Sent from my GT-P6200 using XDA Premium HD app
theejay0625 said:
You will brick your tab if you wipe from stock ICS recovery.. good thing your on HC.. usually when i flash HC and got a bootloop.. the solution is wipe cache and wipe partition.. did u try doing that again? Or flash HC again then wipe cache and partion.. wiping from HC doesnt brick your tab.. but im wondering what caused the bootloop
Sent from my GT-P6200 using XDA Premium HD app
Click to expand...
Click to collapse
I tried it and now samsung logo keeps Loading and Loading....and so on
How can I flash it?
rhazxor said:
I tried it and now samsung logo keeps Loading and Loading....and so on
How can I flash it?
Click to expand...
Click to collapse
Download your stock HC rom from www.samfirmware.com.. boot to download mode.. open odin on your computer.. connect your tab.. choose the HC file on the PDA section.. then press start..
Sent from my GT-P6200 using XDA Premium HD app
theejay0625 said:
Download your stock HC rom from www.samfirmware.com.. boot to download mode.. open odin on your computer.. connect your tab.. choose the HC file on the PDA section.. then press start..
Sent from my GT-P6200 using XDA Premium HD app
Click to expand...
Click to collapse
Ive downloaded a firmware from that site and this is what i got P6200XXKL7_P6200XXKL7_P6200OXXKL1_HOME.tar.md5
Ok I flashed a firmware and now Im kinda stuck on Bootscreen but it is NOT looping
And now Cant Access Recovery Menu But i can Access Download Mode
rhazxor said:
Ive downloaded a firmware from that site and this is what i got P6200XXKL7_P6200XXKL7_P6200OXXKL1_HOME.tar.md5
Ok I flashed a firmware and now Im kinda stuck on Bootscreen but it is NOT looping
And now Cant Access Recovery Menu But i can Access Download Mode
Click to expand...
Click to collapse
The way to fix that bootloop is to wipe from recovery but you cant access the recovery.. the firmware that you got.. is that your tablet's stock firmware? I mean.. every country has its own firmware.. and every tablet has its own stock firmware.. depending on the country you're in.. when im having that bootloop every time when i flash HC.. especially when i flash HC over ICS ( whenever i do something stupid and got stuck on bootloop ) my way out of the bootloop is wipe from Hc recovery..
Sent from my GT-P6200 using XDA Premium HD app
---------- Post added at 03:22 PM ---------- Previous post was at 03:17 PM ----------
Went to the developement area to ask for help.. hope they will respond..
Sent from my GT-P6200 using XDA Premium HD app
Make sure you have a firmware that includes a ".pit" file.
Check (enable) "rePartition" in Odin when you flash
Make sure that the file you use is for your model and country.
theejay0625 said:
The way to fix that bootloop is to wipe from recovery but you cant access the recovery.. the firmware that you got.. is that your tablet's stock firmware? I mean.. every country has its own firmware.. and every tablet has its own stock firmware.. depending on the country you're in.. when im having that bootloop every time when i flash HC.. especially when i flash HC over ICS ( whenever i do something stupid and got stuck on bootloop ) my way out of the bootloop is wipe from Hc recovery..
Sent from my GT-P6200 using XDA Premium HD app
---------- Post added at 03:22 PM ---------- Previous post was at 03:17 PM ----------
Went to the developement area to ask for help.. hope they will respond..
Sent from my GT-P6200 using XDA Premium HD app
Click to expand...
Click to collapse
I didnt download my country firmware cause im not sure if it is 3.2 or not
I downloaded the one that has 3.2
Where ca i get that Pit file?
rhazxor said:
I didnt download my country firmware cause im not sure if it is 3.2 or not
I downloaded the one that has 3.2
Click to expand...
Click to collapse
Best place to find specific firmware - http://live.samsung-updates.com/index.php?device=GT-P6200. The list is sorted by release date, so look through the entire list for your version and region.
You could possibly have a GT-P6200L or -P6201 (depending on your region/carrier), which you can select in the drop-down list on right side of the page.
I don't know if .pit file is included in the .tar.
SaurusM3 said:
Best place to find specific firmware - http://live.samsung-updates.com/index.php?device=GT-P6200. The list is sorted by release date, so look through the entire list for your version and region.
You could possibly have a GT-P6200L or -P6201 (depending on your region/carrier), which you can select in the drop-down list on right side of the page.
I don't know if .pit file is included in the .tar.
Click to expand...
Click to collapse
Is it Necessary to download your region (country) firmware?
rhazxor said:
Is it Necessary to download your region (country) firmware?
Click to expand...
Click to collapse
Yes it is.. because its your tabs original stock rom
Sent from my GT-P6200 using XDA Premium HD app
theejay0625 said:
Yes it is.. because its your tabs original stock rom
Sent from my GT-P6200 using XDA Premium HD app
Click to expand...
Click to collapse
Ok thank you for Helping me alot
I will now download my stock firmware and ill try flash it
ill just post if something would happen
thanks again to all who helped me :laugh:
I think that im on a big trouble now...my Pc wont Detect The Tab now (it says unrecognize Device) but it knows that the tab is connected to the PC
and when i charge the tab it shows a loading battery sign the one with rotating circle and it just stays like that even if i charge it whole day
it started happening when I tried to flash a different firmware in short i flashed a firmware which is not my stock
The firmware i download was a honeycomb firmware XXXXXXX.tar.md5 file on a zip
and so when i extracted the zip winrar said its corrupted (file size is the same i downloaded it without a pause or anything)
and so i just continue the extraction
and then i tried to flash it with odin and odin said md5 mismatch
SO I removed the md5 on the file so it would be XXXXX.tar
and now PC wont detect tab on Download mode and I cant get into recovery mode
any suggestions?
rhazxor said:
I think that im on a big trouble now...my Pc wont Detect The Tab now (it says unrecognize Device) but it knows that the tab is connected to the PC
and when i charge the tab it shows a loading battery sign the one with rotating circle and it just stays like that even if i charge it whole day
it started happening when I tried to flash a different firmware in short i flashed a firmware which is not my stock
The firmware i download was a honeycomb firmware XXXXXXX.tar.md5 file on a zip
and so when i extracted the zip winrar said its corrupted (file size is the same i downloaded it without a pause or anything)
and so i just continue the extraction
and then i tried to flash it with odin and odin said md5 mismatch
SO I removed the md5 on the file so it would be XXXXX.tar
and now PC wont detect tab on Download mode and I cant get into recovery mode
any suggestions?
Click to expand...
Click to collapse
I have a somewhat similar problem, tried to upgrade my stock rooted ICS to official JB(U.K. version) using Odin3 v3.07, halfway i encountered a FAIL message and now my GT-P6210 is stuck in a screen with a big yellow alert sign and below that a message which says " Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again." tried using Kies but could not even connect to the tablet, tried accessing recovery but screen is stuck in that big yellow alert sign with the warning. tried turning if off but still stuck. any suggestions?
mikibabs said:
I have a somewhat similar problem, tried to upgrade my stock rooted ICS to official JB(U.K. version) using Odin3 v3.07, halfway i encountered a FAIL message and now my GT-P6210 is stuck in a screen with a big yellow alert sign and below that a message which says " Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again." tried using Kies but could not even connect to the tablet, tried accessing recovery but screen is stuck in that big yellow alert sign with the warning. tried turning if off but still stuck. any suggestions?
Click to expand...
Click to collapse
I'm not expert but from my dealings with Kies its pure crap lol. Though I would make sure to use a rear (not front) usb port and official samsung cable and try again with Odin with the tab in Download mode, if you can.
I think the steps here would apply (ignoring the different key combination for the tab plus and the stuff after the flashing part at the start)
skurys said:
I'm not expert but from my dealings with Kies its pure crap lol. Though I would make sure to use a rear (not front) usb port and official samsung cable and try again with Odin with the tab in Download mode, if you can.
I think the steps here would apply (ignoring the different key combination for the tab plus and the stuff after the flashing part at the start)
Click to expand...
Click to collapse
finally solved the problem, after more tinkering with it, was able to go into download mode again by just pressing again the power button and the volume down button at the same time (funny thing i tried this method earlier but won't go to download mode but after leaving it on the table for an hour and getting back at it, worked fine). while tablet is in download mode, i run odin again and this time i used version 1.85, loaded the official U.K. version JB tar.md5 file, connected the cable and waited for it to be detected (windows did an auto update) and waited for the :id.com tab to light up to yellow color (by default only the auto-reboot and the F.reset was checked) and click start again and everything went fine. now i have jellybean and rooted it with framaroot(no hassle one click rooting process by alephzain, if it does'nt work just uninstall the .apk). my table is now a rooted jellybean
ok, well.. I should probably just stick to drumming, eh?
I used saferoot method to root my s3 with 4.3 update..
I just figured out that i did successfully root the phone, but did not unlock the bootloader.
I figured this out when I tried to make a backup of my phone and got the yellow triangle at startup
So far in Odin the VRALEC.bootchain.tar.md5 fails..
however the kernal.tar passes, but the phone doesn't load anything past the black and white verizon samsung galaxy III page...
I guess I am looking for help on how to get back to stock and where to find the right stock rom??
I do have this file "KIES_HOME_I535VRBMF1_1152558_REV09_user_low_ship.tar.md5" but don't want to try flashing it for fear of bricking..
any help would be greatly appreciated!!!
thanks in advance.
drumrjoe said:
ok, well.. I should probably just stick to drumming, eh?
I used saferoot method to root my s3 with 4.3 update..
I just figured out that i did successfully root the phone, but did not unlock the bootloader.
I figured this out when I tried to make a backup of my phone and got the yellow triangle at startup
So far in Odin the VRALEC.bootchain.tar.md5 fails..
however the kernal.tar passes, but the phone doesn't load anything past the black and white verizon samsung galaxy III page...
I guess I am looking for help on how to get back to stock and where to find the right stock rom??
I do have this file "KIES_HOME_I535VRBMF1_1152558_REV09_user_low_ship.tar.md5" but don't want to try flashing it for fear of bricking..
any help would be greatly appreciated!!!
thanks in advance.
Click to expand...
Click to collapse
You are stuck on TW 4.3 since you took the OTA. You can only root and you can not Odin flash anything except the bloated 4.3 VRUCML1 tar. You can not downgrade your firmware in any capacity. There is absolutely no flashing any custom roms/kernels/mods/recoveries.
If you can turn the phone on, boot into download mode and Odin flash the 4.3 image via Odin. If the phone does not turn on at all, then perform this hard brick method.
SlimSnoopOS said:
You are stuck on TW 4.3 since you took the OTA. You can only root and you can not Odin flash anything except the bloated 4.3 VRUCML1 tar. You can not downgrade your firmware in any capacity. There is absolutely no flashing any custom roms/kernels/mods/recoveries.
If you can turn the phone on, boot into download mode and Odin flash the 4.3 image via Odin. If the phone does not turn on at all, then perform this hard brick method.
Click to expand...
Click to collapse
Thank you!!!! Thank you!!! Thank You!!!! Just got done with the instructions and I have just rebooted...
:good:
drumrjoe said:
Thank you!!!! Thank you!!! Thank You!!!! Just got done with the instructions and I have just rebooted...
:good:
Click to expand...
Click to collapse
Glad that has helped you If you need any info on the 4.3 OTA whether it's rooting or any warnings about what not to do then keep this 4.3 general discussion thread bookmarked:
http://forum.xda-developers.com/showthread.php?t=2575661
Sent from my SCH-I535 using Tapatalk 4