Database Info

"Unauthorized Software Found" Notice -- How to reset it?

Hi guys.
So I am very new to the Verizon Galaxy S3, and I didn't see this question anywhere that I looked in this section so forgive me anyways if it has been posted before.
After flashing the cm10 nightly from 2012-10-05 (October 5) I got the unauthorized software notice and I can't get it to go away.
Does anybody know how to reset it?
Help is much appreciated.
Thanks.
--Sam

You will have to Odin back to stock and start over. That message means you did not unlock your bootloader.

apacseven said:
You will have to Odin back to stock and start over. That message means you did not unlock your bootloader.
Click to expand...
Click to collapse
I did unlock my bootloader. But now that I can't tether it might be a while to download the 1.2GB file. Thanks man!

If you used ez unlock, there is a chance u had the version that wasnt unlocking properly. That message def comes from flashing custom kernel and a secure aboot in my experience. I think the version everyone said for sure works was 1.2.

apacseven said:
If you used ez unlock, there is a chance u had the version that wasnt unlocking properly. That message def comes from flashing custom kernel and a secure aboot in my experience. I think the version everyone said for sure works was 1.2.
Click to expand...
Click to collapse
I had to use 1.1 cause 1.2 wouldn't open on my phone. :/

Yep, the dreaded triangle. I had use EZ Unlock v1.4 and it screwed me. Use v1.2 or v1.0 I had to Odin back to stock and start from there. All is running well now.
This was how I got it back to stock (rooted). I had to use that special tip in the grey box to work for mine.

I remember when I had this happen to me. I was a total noob at flashing when I got my S3. Tried to install some rom with custom kernel and kept getting this at reboot. Didn't know anything about unlocking bootloader
A month later and I'm a pro... Well maybe not a pro, but no more triangle of death!
At the time, though, I nearly **** my pants lol.
Sent from my SCH-I535 using xda app-developers app

That happened to me, I thought sh#%, I gotta go to Verizon and act stupid. I Messed with it for a few minutes and figured it out. Then odined it back. You learn fast thanks to the geniuses in these forums.
Sent from my SCH-I535 using xda app-developers app

Sorry for posting on an old thread but I though a link to Ez Unlocker V1.2 would be nice for anyone else having this problem. http://forum.xda-developers.com/showthread.php?p=31819403

Please read forum rules before posting
Questions and help issues go in Q&A
Thread moved
Thank you for your cooperation
Friendly Neighborhood Moderator

Had this happen to me last weekend. I thought my boot loader was unlocked but it turned out the superuser app I flashed (which I thought was an updated one) didn't have the thing to unlock the boot loader. Basically I just rooted and assumed I had it unlocked... Then flashed MOAR and after aroma froze 5 times and finally got the whole way through i met mr triangle. Haha
Sent from my SCH-I535 using xda app-developers app

Download the official software update from somewhere online and flash it in Odin. Just make sure you download it for Verizon
Sent from my SCH-I535 using xda app-developers app

Please read forum rules before posting
Questions and help issues go in Q&A
Thread moved
Thank you for your cooperation
Friendly Neighborhood Moderator

No longer works after Verizon 4.3 OTA
ThePatelBros said:
Download the official software update from somewhere online and flash it in Odin. Just make sure you download it for Verizon
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
This process no longer appears to work after Verizon OTA'd the official 4.3 update. I tried to flash back to stock following the steps here:
http://forum.xda-developers.com/showthread.php?t=1840030
However I'm unable to flash the VRALEC bootchain successfully. I'm wondering if Verizon had a little extra magic in that update.

johncase142 said:
This process no longer appears to work after Verizon OTA'd the official 4.3 update. I tried to flash back to stock following the steps here:
http://forum.xda-developers.com/showthread.php?t=1840030
However I'm unable to flash the VRALEC bootchain successfully. I'm wondering if Verizon had a little extra magic in that update.
Click to expand...
Click to collapse
Don't flash anything in Odin. Once on TW 4.3, you're permanently on TW 4.3 because of Knox bootloader. You have the potential to brick your device if you flash anything in Odin.

SlimSnoopOS said:
Don't flash anything in Odin. Once on TW 4.3, you're permanently on TW 4.3 because of Knox bootloader. You have the potential to brick your device if you flash anything in Odin.
Click to expand...
Click to collapse
I have already tried the original 4.0.4 ROM and am getting the yellow unauthorized triangle. Any idea how to make this thing boot again?

johncase142 said:
I have already tried the original 4.0.4 ROM and am getting the yellow unauthorized triangle. Any idea how to make this thing boot again?
Click to expand...
Click to collapse
After which step did you see this yellow triangle? Could you be very specific? Did the ICS tar flash successfully? Cuz from what I understand with 4.3 on other carrier's S3, once you're on TW 4.3 you can't downgrade. I want to tell you to flash VRBMF1 jellybean stock firmware since you've already flashed ICS firmware with no hard brick.

SlimSnoopOS said:
After which step did you see this yellow triangle? Could you be very specific? Did the ICS tar flash successfully? Cuz from what I understand with 4.3 on other carrier's S3, once you're on TW 4.3 you can't downgrade. I want to tell you to flash VRBMF1 jellybean stock firmware since you've already flashed ICS firmware with no hard brick.
Click to expand...
Click to collapse
I tried flashing the VRALEC bootchain first, and it took, but then threw the yellow triangle. After that I tried loading VRALF2 stock firmware and it did not give any errors. I tried again with VRALEC bootchain with no success. Then tried VRALF2 bootchain and VRBMD3 bootchain. I can boot into stock recovery and Odin, but that's all.

johncase142 said:
I have already tried the original 4.0.4 ROM and am getting the yellow unauthorized triangle. Any idea how to make this thing boot again?
Click to expand...
Click to collapse
We don't know. That means bootloader is locked. It would have to be Odin again. If got that with stock tar could be brick. If try to unlock may get hard brick. You kinda past the point of no return. Can try to Odin another newer one like MF1 and see what happens. It is saying the kernel is not compatible. Can't clear that message anyway without another stock Odin. Can't unlock with that message anyway. It's too late.
Sent from my SCH-I535 using Xparent Skyblue Tapatalk 2

prdog1 said:
We don't know. That means bootloader is locked. It would have to be Odin again. If got that with stock tar could be brick. If try to unlock may get hard brick. You kinda past the point of no return. Can try to Odin another newer one like MF1 and see what happens. It is saying the kernel is not compatible. Can't clear that message anyway without another stock Odin. Can't unlock with that message anyway. It's too late.
Sent from my SCH-I535 using Xparent Skyblue Tapatalk 2
Click to expand...
Click to collapse
Ok, I'm already downloading MF1 on my really slow Internet connection. It may be done by sunrise.

(Help please) Verizon warning triangle after trying to update to 4.3 from 4.1.2

I'm in need of some serious help here guys. Tonight I tried to update my rooted s3 on 4.1.2 to the new update 4.3. I accepted the download and after the download I installed it. My phone booted into the yellow Verizon triangle telling me it noticed I have unauthorized programs on my phone not authorized by Verizon and to turn the phone off and take it into Verizon. I tried to boot into clockwork recovery and it would not let me and booted back to the yellow Verizon triangle.
I have no idea what to do, did I permanently brick my phone or can I get back to 4.1.2 some how? I would greatly appreciate any information pointing in the direction to fix this.

I managed to recover my phone! I pulled the battery and sim card prior to signing up on xda because I read someone having the same issue on a note 2. Once the battery and sim is removed let it set for a half hour then place the sim and battery back into the phone. Once they were back in the phone press the power button ,it should boot right up as it normally would. I'm not saying there isn't more than one way of fixing this issue but this method worked for me and I thought I would share for those who might experience this yellow triangle notification as well. On a side note it did not successfully updated my phone but returned me back to 4.1.2

You need to be 100% stock to take an OTA (unrooted, stock recovery). The easiest way to get to that state is to ODIN a stock factory image. This will delete your internal storage.
Was your bootloader unlocked prior to trying to update to 4.3? I'm assuming so if you were running CWM recovery.

I actually had the same problem and am trying to fix right now. I tried running rootkeeper before the update, but that obviously didn't work. Anyone know where I can get the 4.1.2 image to flash? Also, do i need to do that "Triangle Away"? My custom binary dL says "Yes (4 counts)."

irl5fan said:
I actually had the same problem and am trying to fix right now. I tried running rootkeeper before the update, but that obviously didn't work. Anyone know where I can get the 4.1.2 image to flash? Also, do i need to do that "Triangle Away"? My custom binary dL says "Yes (4 counts)."
Click to expand...
Click to collapse
Triangle Away is free for XDA members. Must be stock rooted to work. Won't work on every rom. May have to odin stock, root run Triangle and then Odin Stock again. Remove tar from MF1 zip to Odin. Once on 4.3 there is no return and no unlock. Can run Saferoot to root. Do not try to unlock or flash custom recovery or device will brick.
Triangle Away- http://forum.xda-developers.com/showpost.php?p=22462960&postcount=1
MF1- http://www.androidfilehost.com/?fid=23134718111254196

BattsNotIncld said:
You need to be 100% stock to take an OTA (unrooted, stock recovery).
Click to expand...
Click to collapse
You sure about that? Seems quite a few people were on 4.1.2 stock + rooted, took the update, and went to 4.3 fine, but lost root.
Quite a few in the main 4.3 thread.

BattsNotIncld said:
You need to be 100% stock to take an OTA (unrooted, stock recovery). The easiest way to get to that state is to ODIN a stock factory image. This will delete your internal storage.
Was your bootloader unlocked prior to trying to update to 4.3? I'm assuming so if you were running CWM recovery.
Click to expand...
Click to collapse
Yes my bootloader is unlocked. I think I'm going to postpone the 4.3 update until I hear better reviews. I have seen posts on here where people are having issues after taking the update. I simply did not know what was going on if I had hard bricked my device or not, luckily I did not and was able to get back to 4.1.2

Rsc25 said:
Yes my bootloader is unlocked. I think I'm going to postpone the 4.3 update until I hear better reviews. I have seen posts on here where people are having issues after taking the update. I simply did not know what was going on if I had hard bricked my device or not, luckily I did not and was able to get back to 4.1.2
Click to expand...
Click to collapse
I updated my wifes Via the OTA and she has had 0 issues. I think most of the issues people are having after the OTA are self inflicted.

stock image
BattsNotIncld said:
You need to be 100% stock to take an OTA (unrooted, stock recovery). The easiest way to get to that state is to ODIN a stock factory image. This will delete your internal storage.
Was your bootloader unlocked prior to trying to update to 4.3? I'm assuming so if you were running CWM recovery.
Click to expand...
Click to collapse
just wonderingim trying to get a stock vrbm1 tar but every link I try is down I did have it on a usb but lost it, originally from dark menace if you know of another source would be great ive downloaded a few but md5 doesn't match

[Q] HELP ME!! I f$*ked my phone up royally!

Okay, kind of a noob. I have the Samsung Galaxy S3 Verizon. I was on 4.1.2 rooted using Beanstown 106 method, and was running axis rom. It was ok but 4.3 came out & I wanted to try it, since the rom had excellent performance, but a lot of little bugs that were bothering me. I shut the root off in the SU accepted the 4.3 ota update and everything was fine except for when the phone would boot up it showed the samsung logo with an unlock padlock and said custom.. Not a big deal but I liked the 4.3 so wanted to take away the boot unlock icon (just in case for warranty purposes). It was my understanding if I would ODIN back to stock it would go away. Long story short in between trying to odin to stock, Kies back to stock and every other method I can find, my phone is stuck in ODIN/download mode and won't do anything else. I've searched everywhere and cannot figure it out. In odin mode the phone says something like Software upgrade error, use software repair assistant or something like that. Don't know what to try or do, and stuck using a razr until I get my GS3 back. Please help!!!

Didn't accept the OTA, but from what others have posted, it sounds like the correct way to do it is to revert to stock, unroot, relock bootloader and use triangle away to reset counter, then accept the OTA. If you dont use triangle away prior to accepting OTA, you get the unlock icon + custom. Once you accept the OTA, trying to revert to anything else or flashing a custom recovery will result in a hard brick.
Sent from my SCH-I535 using Tapatalk

Shibby87 said:
Didn't accept the OTA, but from what others have posted, it sounds like the correct way to do it is to revert to stock, unroot, relock bootloader and use triangle away to reset counter, then accept the OTA. If you dont use triangle away prior to accepting OTA, you get the unlock icon + custom. Once you accept the OTA, trying to revert to anything else or flashing a custom recovery will result in a hard brick.
Sent from my SCH-I535 using Tapatalk
Click to expand...
Click to collapse
Well then I'm hard bricked, because I tried to ODIN back to stock as well as KIES and they both just say fail..

I just fixed my phone with verizon software utility. My guide should be up with the utility sometime tonight. If you can get into bootloader it will flash SCH-I535_I535VRUCML1 I tried to get the files it downloaded but there not odin files or zips.

Hopefully this helps http://forum.xda-developers.com/showthread.php?t=2586319

ThePagel said:
Hopefully this helps http://forum.xda-developers.com/showthread.php?t=2586319
Click to expand...
Click to collapse
Holy **** I can't wait to get home and try this! Hopefully it works, thank you!

[Q] VRUCNC1 Help?

I have read through multiple posts but I am still slightly confused. So I have a Samsung Galaxy S3 running VRUCNC1. I have read that it is unrootable and that using ODIN to downgrade is the only option, but I have also read that downgrading will brick your phone. Could someone assist me with this?

Trevon75 said:
I have read through multiple posts but I am still slightly confused. So I have a Samsung Galaxy S3 running VRUCNC1. I have read that it is unrootable and that using ODIN to downgrade is the only option, but I have also read that downgrading will brick your phone. Could someone assist me with this?
Click to expand...
Click to collapse
Once your phone has taken either 4.3 OTA (VRUCML1 or VRUCNC1), downgrading to 4.1.2 will result in a hard brick. You can only switch between VRUMCL1 and VRUCNC1, the phone will essentially not boot on any other firmware. Downgrade to VRUCML1 then root via Saferoot. It is safe to do this.
Users with unlocked bootloaders (aka people who did not take either 4.3 OTA) can switch to ICS or JB 4.1.2 via Odin without fail or issue. We can do so, unless somehow we end up taking either 4.3 ota.

SlimSnoopOS said:
Once your phone has taken either 4.3 OTA (VRUCML1 or VRUCNC1), downgrading to 4.1.2 will result in a hard brick. You can only switch between VRUMCL1 and VRUCNC1, the phone will essentially not boot on any other firmware. Downgrade to VRUCML1 then root via Saferoot. It is safe to do this.
Users with unlocked bootloaders (aka people who did not take either 4.3 OTA) can switch to ICS or JB 4.1.2 via Odin without fail or issue. We can do so, unless somehow we end up taking either 4.3 ota.
Click to expand...
Click to collapse
Thank you! I apologize for the late response, but you explained this perfectly for me. I was able to downgrade and root, install safestrap, and even flash a ROM. However, I have only gotten one ROM to flash correctly. Is there another step I have missed? I have only gotten CleanROM 8.1 to flash correctly while everything else flashes but does not boot. I really appreciate the help!

Trevon75 said:
Thank you! I apologize for the late response, but you explained this perfectly for me. I was able to downgrade and root, install safestrap, and even flash a ROM. However, I have only gotten one ROM to flash correctly. Is there another step I have missed? I have only gotten CleanROM 8.1 to flash correctly while everything else flashes but does not boot. I really appreciate the help!
Click to expand...
Click to collapse
Unsure why it won't flash any other roms try this thread it's a good starting point
http://forum.xda-developers.com/showthread.php?t=2639337
Sent from my SCH-I535 using Xparent ICS Tapatalk 2

[Q] Help with soft brick please!

So I messed up my sch-i535. I tried rooting it because Ive done it before and I really wasn't paying attention to what the latest update did to it. I've tried different things with Odin and different firmware. And apparently the boot loader isn't flash able but I can get into download mode. Is there away to fix it I've browsed around and haven't found a fix. I'd appreciate All the help I can get please and thank you.
Specs:
Verizon Samsung galaxy s3
Most recent 4.3 updated with the unflashepee

bfunk1987 said:
So I messed up my sch-i535. I tried rooting it because Ive done it before and I really wasn't paying attention to what the latest update did to it. I've tried different things with Odin and different firmware. And apparently the boot loader isn't flash able but I can get into download mode. Is there away to fix it I've browsed around and haven't found a fix. I'd appreciate All the help I can get please and thank you.
Specs:
Verizon Samsung galaxy s3
Most recent 4.3 updated with the unflashepee
Click to expand...
Click to collapse
If your on NC1 you can Odin back to ML1 and root from there. NC1 is unrootable at this point.
Sent from my SCH-I535 using Xparent ICS Tapatalk 2