Related
I've been running CM7 for a month or so and I started having some stability problems. So I decided to try DarkyRom.
I did everything like normal (used heimdall).
Upon boot it had an error.
Failed to mount /efs while applying multi-csc.
I'm dead in the water. I tried to flash back to stock. I get an error and thrown into samsung recovery. I can reboot from that and I boot to the gui with no radio. Phone info says "Unknown" Hardware and Baseband Version.
No. I did not backup any EFS (news to me). I do have access to the same model phone, my son has one he just uses as a fancy MP3 player (no phone/data plan).
Is there anything I can do? I did use the ADB Shell and ran "mount" to see if the EFS was mounted. It was a negative...
-MT
Could this have something to do with the file system?
I don't have CWM working. I'm going to work on that. Right now I juast have Samsung Rec. Utils. The error that is in there is:
E:Can't mount /dev/block/mmcblk0p1 (Invalid argument)
mainethoughts said:
Could this have something to do with the file system?
I don't have CWM working. I'm going to work on that. Right now I juast have Samsung Rec. Utils. The error that is in there is:
E:Can't mount /dev/block/mmcblk0p1 (Invalid argument)
Click to expand...
Click to collapse
First off,are you even on the right forum? Darky rom isn't built for this phone so it's not going to work.
Sent from my SCH-I500 using XDA App
Ugh...an unfortunate response. Yes...I'm on the right forum.
I did make a CWM backup from a couple weeks ago. Not sure if that helps.
mainethoughts said:
Ugh...an unfortunate response. Yes...I'm on the right forum.
Click to expand...
Click to collapse
Them why are you flashing roms from other forums/phones? Use odin and check repartition.
Sent from my SCH-I500 using XDA App
*hangs head* Admonishment accepted. I really don't know what I was thinking.
Here is my progress. I tried using Odin to just Re-partition. No go.
<ID:0/003> Can't open the specified file. (Line: 1455)
So then I downloaded stock EC10 (That was factory on my phone). I flashed that via Odin with "Success".
The same error as initially posted was on the phone. I rebooted from the stock recovery console and I was able to boot. 3g works. The hardware and baseband are now accurate. I'm getting a lot of force closes however. The twlauncher is constantly crashing.
So now the phone is semi-functional but there are still errors. (I was getting more forces than normal in CM7 that caused me to dive into this process in the first place).
I could be way off base but I'm thinking that possibly there is corruption (or wrong file system?) problems with the internal SD (I did format the External SD at the start of this).
I appreciate your help. Any suggestions from here?
-MT
Additional Note: Settings are not saved between reboots.
-Rooted
-Installed ROM Manager
-Installed CWM 3
-Reboot into Recovery Mode
No go. Same /dev/block/mmcblk0p1 error (installation aborted)
The 3e recovery also says:
"your storage not prepared yet, please use UI menu for format and reboot actions."
I tried both wipes. Errors.
mainethoughts said:
-Rooted
-Installed ROM Manager
-Installed CWM 3
-Reboot into Recovery Mode
No go. Same /dev/block/mmcblk0p1 error (installation aborted)
The 3e recovery also says:
"your storage not prepared yet, please use UI menu for format and reboot actions."
I tried both wipes. Errors.
Click to expand...
Click to collapse
Use the full odin restore package and make sure you use pit and pda files. Repartition must be checked. Wiping data might be a good idea as well.
Sent from my SCH-I500 using XDA App
I would odin the full mesmerize package EE19. http://forum.xda-developers.com/showthread.php?t=881064
That is what I have already done I believe. Followed instructions from:
http://forum.xda-developers.com/showthread.php?t=881064
-MT
If you've done that, then i'm at a loss. That usually is my solve-all solution... Sorry man.
Thank you much. Is it possible that I could have a faulty internal SD? I had suddenly started getting a lot of force closes in CM7. I guess I'm just wondering if I'm fighting two separate issues here. (My bonehead move vs. a real problem)
-MT
I think I'm FIXED!
I was finally (I don't know how) able to get Odin to Flash CWM 4 (The Blue one needed to install CM7).
I got ZERO errors in CWM. So I took the opportunity to clear caches, format data...I got destructive.
I then installed the CM7 Rom. -SUCCESS
Installed GAPPS - SUCCESS
I hope everything is OK at this point. I know CM7 is booting in about 20 seconds opposed to 5 minutes like it was before I decided to try to morph my phone into an I9000.
I actually saw the black screen with the little phone to PC icons at one point tonight. I think I came real close....
Thanks for your help!
PS: CONFIRMED mmcblk0p1 is mounted! (EFS, etc) PHEW!
I had this happen to me right after a Odin even did the rfs formatter tool exact same problems not saving settings upon reboot and it saying something along the lines of process.android.blah blah blah and double vibrate when booting before the fc anyhow I just reflashed miui to get cwm4 wiped everything reflashed cm7 no probs since
Sent from my SCH-I500 using XDA App
For those who have been living under a rock, problematic leaked builds of ICS were released for several different Samsung devices a few months ago. Users of those Devices for instance soon discovered that their devices were being ffected by what came to be known as the MMC_CAP_ERASE bug. Shortly after this*occurred, XDA Senior Member hg42 came up with a way to revive downed devices.
Now thanks to some more ingeniuty on his part, hg42 has also developed a companion application known as Partition Scanner to assist in this process.*The application features:
emmc_scan_all_partitions_once.zip
emmc_scan_all_partitions_infinitely.zip
these allow fast scanning of all blocks of all emmc partitions in 1MiB steps.
The main purpose is to access each emmc block to find any bricked block in the partitions after repartitioning.
The “infinitely” variant runs checks infinitely, which may help to find emmc brick effects which only occur sporadically (if such effect really exists). Run this as long as you want. Reboot to finish.
If this freezes the last partition shown may have a bricked block inside.
emmc_find_brick_start.zip
emmc_find_brick_end.zip
these scan the whole emmc device.
emmc_find_brick_start starts scanning from the beginning of the device upward.
emmc_find_brick_end searches the end of the device and then scans downward.
If this runs up to the end or down to zero (showing a message with “completed –> OK”), no bricked block was found.
If it freezes, the block shown last with “…” at end of line is the first bricked block in that direction.
The line before with “-> ok” is the first usable block before/after the brick.
The application has received excellent reviews, so if you’re one of those people currently facing an EMMC issue, or you had the issue previously and gave up on your device, head on over to the companion thread and give this a go.
Click to expand...
Click to collapse
Original xda news: http://www.xda-developers.com/android/partition-scanner-helps-your-emmc-bricked-devices/
Original thread by hg42: http://forum.xda-developers.com/showthread.php?t=1667886
He even provides PITs for our devices, so get a bit into Linux, and fix it by yourself, You can't make it worse I guess..
Anything more to say? Hang onto it, unbrick it and kick Samsungs ass once again!!
Greetings from Australia!
Sent from my GT-P6200 using xda app-developers app
Bad2hold said:
Original xda news: http://www.xda-developers.com/android/partition-scanner-helps-your-emmc-bricked-devices/
Original thread by hg42: http://forum.xda-developers.com/showthread.php?t=1667886
He even provides PITs for our devices, so get a bit into Linux, and fix it by yourself, You can't make it worse I guess..
Anything more to say? Hang onto it, unbrick it and kick Samsungs ass once again!!
Greetings from Australia!
Sent from my GT-P6200 using xda app-developers app
Click to expand...
Click to collapse
@Bad2hold - have you tried this yourself as I am desperate for help in unbricking my device that Samsung refuse to repair as it is the P-6200L (non-UK model).
I can't use ADB as my pc won't recognise the Tab, have tried flashing the .pit file and firmware but no joy, can't use the partition scanner as I can't get it to scan the internal memory (it scans the external SD card instead).
I can install CWM recovery and also get to stock recovery but the Tab will not go past the white Galaxy Tab logo.
Any help is highly appreciated
There is good chance you can recover. try multiple factory resets. flash earlirst odin package, preferrably with a boot.bin, after flash, and stuck on logo, boot to recovery and factory reset. try wiping a few more times if it is still stuck. i usually have to do this when going back to stock. one time i had to wipe from custom recovery, and a combonation of other things..
If you have recovery, youre lucky.
If you give up, you can for JTAG, normally for hard bricks. mobiltechvideos.com saved me from hardbrick.
Id play around a bit before I send to JTAG.
best of luck..
chrisrotolo said:
There is good chance you can recover. try multiple factory resets. flash earlirst odin package, preferrably with a boot.bin, after flash, and stuck on logo, boot to recovery and factory reset. try wiping a few more times if it is still stuck. i usually have to do this when going back to stock. one time i had to wipe from custom recovery, and a combonation of other things..
If you have recovery, youre lucky.
If you give up, you can for JTAG, normally for hard bricks. mobiltechvideos.com saved me from hardbrick.
Id play around a bit before I send to JTAG.
best of luck..
Click to expand...
Click to collapse
Thanks for the advice mate.
Am going to flash it with the honeycomb firmware it came with from Sammobile and try a few factory resets to see if that works.
If not have found a place in the UK that will JTAG it for £38 if all else fails...:good:
UPDATE: Honeycomb doesn't let me access recovery so no way to wipe from there. Recovery is available on an ICS rom but am reluctant wipe in stock recovery as that's how I go in this mess to begin with :crying:
I currently cant help, as iam travelling without a pc... but this guy who developed this scanner, has pit files available for our device. So there is a good chance to get help from him. And iam sure, with some hours off every week, where u get bored, u can actually fix it by yourself as u already figured out that much... i would love to help, its a challange you know? maybe iam gonna buy a laptop... =p
Update: just curious, is it scanning without a external sd inserted? Because internal and sd are swapped in cwm recovery since 3 versions too...
Sent from my GT-P6200 using xda app-developers app
@Bad2hold - Thanks for the reply, have tried flashing the .pit file but no joy.
Can't get the scanner to scan internal card as it's loaded on my external sd and can't push it to the internal which then means I can't remove the external sd.
Have tried flashing various honeycomb and ICS firmwares with a combination of .pit files, the process flashed fine without errors but still no boot past the white Samsung writing
Sent from my GT-I9300 using xda premium
Just one question:
do I use it if my device got bricked (fortunately it s not the case), or do I use it to remove the brick bug risk from my device?
Thanks for your answer...
unclefab said:
Just one question:
do I use it if my device got bricked (fortunately it s not the case), or do I use it to remove the brick bug risk from my device?
Thanks for your answer...
Click to expand...
Click to collapse
I think we cannot remove the brickbug on stock ICS...that pit file just for solving hardbrick issue...
Sent from my GT-P6200 using xda premium
U can actually remove the brick bug issue, this is, what this post is about.
Basically, you just have to find the bad blocks in your sd partition.
After you found them, all is left, is to repartition your sd around the bricked blocks, which you have to delete from your partition.
He mentions several methods to use adb and other tools, helping to do this.
And i really recommend reading a bit through his first post, found the same problem after a minute:
I also had the following problem:
I couldn't format my internal sdcard with the cm9 recovery. I think it's too big for the mkfs.vfat tool of current cm9. So I installed another recovery, formatted the internal sd (I thought).
This erased all my current backups and downloads, because in reality it was my external sd. Fortunately I had a backup of the external sdcard from before rescuing my phone.
So, you may want to create a backup of your external sdcard first.
Then double check which is your internal sdcard (the UMS partition) and which is your external sdcard.
Or you could remove the external sd completely. But think about when to remove it, because you might need it for some files (e.g. to use the emmc partition scanner).
Click to expand...
Click to collapse
Of course, if u r not familiar with linux, u probably wont fix it in an hour.
But you can learn a lot within an hour. First of all, figure out how to connect your device to adb. (Which is still possible, if you didnt smash your tab against the wall or so...) After that, it should be lot easier to follow his instructions.(not just because u have adb working, but because you know what he is actually talking about.)
And he is really willing to help, so figure out as much as possible after connected to adb and just ask in his post if you get stuck.
Dont forget: if its not a issue by malfunctioning/broken hardware, then you actually can fix everything with your pc, you just need to know how.. so dont give up!!!
here his post again: http://forum.xda-developers.com/showthread.php?t=1667886
And @kersey: what pit file did u flash? The pits he provides are to repartition your SD AFTER you located the bricked blocks. But you cant know, if you cant get his scanner running..? You have to format data partition in recovery after flashing one of those, because of missing file system.
Note: Never flash a stock ICS after you fixed it. It will brick your device again. But u r safe with cm9 and others.
Sent from my GT-P6200 using xda app-developers app
Good news all, after much trial and error and more flashing than your average pervert I have revived my tablet from the dead with a big thank you to hg42 for his scanner and extra advice.
Thanks to all those who helped in this post too :good:
Dude, if you dont mind, what exactly have you done to revive your tab?
Not exactly, just a quick guide to avoid the most common mistakes.
Thanx!
Sent from my GT-P6200 using xda app-developers app
Bad2hold said:
Dude, if you dont mind, what exactly have you done to revive your tab?
Not exactly, just a quick guide to avoid the most common mistakes.
Thanx!
Sent from my GT-P6200 using xda app-developers app
Click to expand...
Click to collapse
It was pretty simple to revive it with hg42's help.
The first thing you need to do is ensure you have CWM recovery, as the scanning tools only work with that.
Download hg42 emmc partition scanner from the link on the first page of this topic and copy to all 5 zip files to your external sd card. You will also need to download hg42's patched .pit file for your model of tab.
Boot into CWM recovery and flash emmc_find_brick_start.zip. This will scan you tab and will freeze on a bad block. Make a note of the number it freezes on.
Now flash the emmc_find_brick_end.zip file and once again make a note of the number the tab freezes on.
You now need to select the patched .pit file that falls within the range of brick start and brick end. e.g. my brick_start was 1074 and brick_end was 2147 so the patched .pit file I flashed with Odin was "P6200_tabplus--patched--brick-between-281-and-2160-MB--FACTORYFS-moved-by-1792-MiB"
I once again entered CWM recovery and did a scan using emmc_scan_all_partitions_once.zip. Which verified there were no errors.
I then booted up the Tab and hey presto it was alive again.
Feeling brave I then flashed the latest Austrian 4.0.4 firmware followed by permanent CWM recovery making sure that I can never do a factory reset using stock recovery which cause the brick to begin with.
Hope the above makes sense to those who need it, I'm sure as you go through the processes above it will.
I'd also like to encourage anyone who uses hg42's emmc tools to offer a donation as without him I would have had a very expensive paperweight or would have had to pay to get it JTAG'd
Happy Boy
Hi all
While trying to root and install custom rom I bricked my friends phone. I have been going crazy trying everything I could to get this brick back to life.
ITS ALIVE AGAIN!!!!!!!!
Thank you kersey for your post on how you got your Tab back.
This is what I did.
I installed the 5 files on the SD card.
120824-151927-emmc_find_brick_end
120824-151927-emmc_find_brick_start
120824-151927-emmc_scan_all_partitions_infinitely
120824-151927-emmc_scan_all_partitions_once
120824-220105-emmc_scan_write
I put the phone into recovery mode and ran 120824-151927-emmc_find_brick_start.
The program started scanning the memory and first froze on 2188.
I got back into recovery and ran 120824-151927-emmc_find_brick_end
once again the program started counting down and froze about 3189.
For this phone the correct pit files were in " pits-N7000_16GB "
I unzipped pits-N7000_16GB and looked for the nearest pit file , which was
N7000_16GB_Q1_20110914--patched--brick-between-1174-and-3321-MB--DATAFS-moved-by-2048-MiB.pit
I then put the phone back into download mode and using Odin flashed the patched pit file above.
Disconnecting the phone from computer I went back into recovery and ran120824-151927-emmc_scan_all_partitions_once
For the first time I was able to do a full scan without the program freezing.
Next step was installing Abyss Kernel 4.2. I then did the regular data wipe/cache wipe/dalvik wipe.
And finally I installed Rocketrom 11.
The phone rebooted and then came back to life.
I checked the internal memory and it was down to 9gb, but who cares as long as its ALIVE AGAIN !!!!
hg42 you sir are an absolute legend. Donation coming your way.
This method definitely works . Just be patient. I hope This helps others aswell
EDIT:
Is there any not so hard way to install the original rom with the pit i need? cm10 works, but i dont like it so much.
p6201dbtlpc_p6201xxlpc_p6201xxlp3_home.tar i would like to use
but i only know to flash this in odin, becouse it is no zip, i have no clue how to flash it in cwm
thanks for an answer!
-----------------
Your post should be on first post added =)
And in http://forum.xda-developers.com/showthread.php?t=1807002 !
Thanks for it!
kersey said:
It was pretty simple to revive it with hg42's help.
The first thing you need to do is ensure you have CWM recovery, as the scanning tools only work with that.
Download hg42 emmc partition scanner from the link on the first page of this topic and copy to all 5 zip files to your external sd card. You will also need to download hg42's patched .pit file for your model of tab.
Boot into CWM recovery and flash emmc_find_brick_start.zip. This will scan you tab and will freeze on a bad block. Make a note of the number it freezes on.
Now flash the emmc_find_brick_end.zip file and once again make a note of the number the tab freezes on.
You now need to select the patched .pit file that falls within the range of brick start and brick end. e.g. my brick_start was 1074 and brick_end was 2147 so the patched .pit file I flashed with Odin was "P6200_tabplus--patched--brick-between-281-and-2160-MB--FACTORYFS-moved-by-1792-MiB"
I once again entered CWM recovery and did a scan using emmc_scan_all_partitions_once.zip. Which verified there were no errors.
I then booted up the Tab and hey presto it was alive again.
Feeling brave I then flashed the latest Austrian 4.0.4 firmware followed by permanent CWM recovery making sure that I can never do a factory reset using stock recovery which cause the brick to begin with.
Hope the above makes sense to those who need it, I'm sure as you go through the processes above it will.
I'd also like to encourage anyone who uses hg42's emmc tools to offer a donation as without him I would have had a very expensive paperweight or would have had to pay to get it JTAG'd
Click to expand...
Click to collapse
ICS update and emmc bug
Hi; not sure if right forum, but here goes ,
I updated my tab plus to ics 4.0.4 using alpn and xlpn file from sammobile using odin from pc,
tab was never rooted only used a launcher
so my question is after i have installed ics and will not root or use cwm ,will i still have to worry about the emmc bug and if yes
is it best just to go back to honeycomb
btw all is running well on ics just worried about bricking
thank you in advance
doaft said:
Hi; not sure if right forum, but here goes ,
I updated my tab plus to ics 4.0.4 using alpn and xlpn file from sammobile using odin from pc,
tab was never rooted only used a launcher
so my question is after i have installed ics and will not root or use cwm ,will i still have to worry about the emmc bug and if yes
is it best just to go back to honeycomb
btw all is running well on ics just worried about bricking
thank you in advance
Click to expand...
Click to collapse
If you chose to do a factory restore via stock recovery, which is what you have due to not being rooted and not having CWM installed there is a very big chance you may brick your device. I speak from experience!!!
If you are that worried I would flash back to honeycomb rather than risking having an expensive paperweight
Sent from my GT-I9300 using xda premium
A little of my own experience with superbrick
Bad2hold said:
Dude, if you dont mind, what exactly have you done to revive your tab?
Not exactly, just a quick guide to avoid the most common mistakes.
Thanx!
Sent from my GT-P6200 using xda app-developers app
Click to expand...
Click to collapse
You guys can follow this guide I wrote for the Galaxy Tab 7.7 (which also suffers from mmc_cap_erase) : http://forum.xda-developers.com/showthread.php?t=1862294
Just replace the partition numbers with the ones parted shows you.
The problem is, either way you followed, after being revived your tab will :
- rebrick everytime you flash anything
- Have less than 1gb of internal storage
- Hang everytime you want to download an app or whatever
To fix the last 2 problems, you need to make an ext2sd script to swap your internal-sd and external-sd.
To do so, go to /dev/block/vold : you'll see two files named with numbers (i.e : 22:48 179:48), note the name of those 2 files (one of them is your external-sd mount point)
Then replace the "xxx:xx" in the following script with the name of the first file :
Code:
mount -t vfat -o umask=0000 /dev/block/vold/xxx:xx /storage/sdcard0
mount -o bind /data/media /storage/sdcard1
Save this script in a file called ext2sd1.sh and use Script Manager to run it "as root" and "at boot", now reboot and go to settings/storage : if the first file was your extsd mount point your internal and external storage should now be swapped (i.e : if you have a 64gb external sdcard the settings will show : internal storage : 64gb, and you can actually install 64gb of apps).
If it didn't work, replace the xxx:xx in the script with the name of the second file, then it should work.
Good luck guys, this superbrick is a damn pain in the ass, we can thank sammy for it
P6200
Hello man... I saw your post ''Good news all, after much trial and error and more flashing than your average pervert I have revived my tablet from the dead with a big thank you to hg42 for his scanner and extra advice.
Thanks to all those who helped in this post too'' ... I have the same problem with my P6200. Please give me that scanner to fix it or tell me how to put my tablet back On... Thanks
Androguide.fr said:
You guys can follow this guide I wrote for the Galaxy Tab 7.7 (which also suffers from mmc_cap_erase) : http://forum.xda-developers.com/showthread.php?t=1862294
Just replace the partition numbers with the ones parted shows you.
The problem is, either way you followed, after being revived your tab will :
- rebrick everytime you flash anything
- Have less than 1gb of internal storage
- Hang everytime you want to download an app or whatever
To fix the last 2 problems, you need to make an ext2sd script to swap your internal-sd and external-sd.
To do so, go to /dev/block/vold : you'll see two files named with numbers (i.e : 22:48 179:48), note the name of those 2 files (one of them is your external-sd mount point)
Then replace the "xxx:xx" in the following script with the name of the first file :
Code:
mount -t vfat -o umask=0000 /dev/block/vold/xxx:xx /storage/sdcard0
mount -o bind /data/media /storage/sdcard1
Save this script in a file called ext2sd1.sh and use Script Manager to run it "as root" and "at boot", now reboot and go to settings/storage : if the first file was your extsd mount point your internal and external storage should now be swapped (i.e : if you have a 64gb external sdcard the settings will show : internal storage : 64gb, and you can actually install 64gb of apps).
If it didn't work, replace the xxx:xx in the script with the name of the second file, then it should work.
Good luck guys, this superbrick is a damn pain in the ass, we can thank sammy for it
Click to expand...
Click to collapse
hey dude it's my first post in xda
i've succeded to unbrick my device but my internal memory is shrink a lot into 700+ mb but i don't understand how to use the script so
can u explain step by step ?
one can help me ??
hai everybody.... i'm from indonesia.., my friend just give me samsung galaxy tab 7 plus... ( GT-P6200 ) without any boxes, last day i try to get ICS update from kies , but the application won't update my firmware , so i try the alternative direction.
i try another application - Odin3-v1.85 and download the firmware..., but the fact is after few second running it self , the prosess can't continues get fail after
Note : i;m using : P6200OXALQ1_P6200XXLQ1_P6200XXLQ1_HOME.tar.md5 firmware
<ID:0/017> Firmware update start..
<ID:0/017> cache.img
<ID:0/017> NAND Write Start!!
<ID:0/017> factoryfs.img
<ID:0/017> hidden.img
<ID:0/017> recovery.img
<ID:0/017> Sbl.bin
<ID:0/017>
<ID:0/017> Complete(Write) operation failed. >>> FAIL...
anyone can help me .... please
To whom ever can help out, I have a Galaxy Tab 2 7.0, and cannot seem to get my problem resolved by myself. I have somehow inadvertently managed to install an update.zip that had or had no relations to this particular OS of this particular model of android.
My problem is that I wanted to be able to, migrate my apps to the external SdCard or extSdCard, and I think I used an update.zip designed for the cellphone HTC Evo 4g. Not realizing that I will be later unable to use the restore feature from a previous backup I had made using CWM 6.0.1.0 to recover from my inadvertent mistake (not to comfortable making a backup, and thinking I can restore properly anymore, like I can on my cellphone that I am spoiled with).
Silly of me to think I could use an update.zip designed for another type of device such as the HTC Evo 4g, but… (anyway my bad what was I thinking…?). The update.zip, by the way is "dtapps2sd-2.7.5.2-signed", like I mentioned this is clearly designed for the HTC Evo 4g, and not for the Samsung GT2 7.0.
The problem I experience now is not complete lose of my GT2 7.0 device I can still install and change out OS through the CWM-Recovery and install apps through the Android Market. I do however experience the inability to check my Storage properties under my Settings profile. When I attempt to click on this link it pauses for a second as if it wants to open up and perform its normal function, then reports an error "Unfortunately, Settings has stopped". Now at this point this is where I would have to mention another issue similar to this one, and that is at startup. When I first start the device up and it runs through its process of startup configuration. It will then report a list of programs that are prevented from running properly it as follows;
Unfortunately, the process android.process.media has stopped.
Unfortunately, My Files has stopped.
Unfortunately, Factory Test has stopped.
Unfortunately, MTP has stopped.
Now my question is, how is-it possible to resolve this issue. I have tried to complete a fresh install of the OS, CWM-Recovery, and also attempted to wipe everything possible that the recovery will allow, but I am not expecting much, as I cannot even get the backup and restore feature to work efficiently enough to provide me with what I need it to do…
I have provided this post with a download of the update.zip I used as well as the version of the OS I have provided my Samsung GT2 7.0. If anyone can shine some insight on what direction I should attempt to do to resolve this issue I would be more that interested to take a look at what I could use to correct this error of mine…
-Samsung GT2 7.0 - OS (Use the Download link above the Rosewell signature)
http://forum.xda-developers.com/showthread.php?t=1784318
-dtapps2sd-2.7.5.2-signed
http://www.mediafire.com/?7jpc5oudzt6o76p
I might be comfortable to ADB Shell into my device to make changes, or if one was able provide me an update.zip/script that would be great. Also is there a better recovery out there than the ClockWorkRecovery.
Better recovery so you may try twrp or so
Try install a fresh firmware preferably with a pit file from odin pc
Sent from my GT-I9300 using xda app-developers app
Mohamedselim said:
Better recovery so you may try twrp or so
Try install a fresh firmware preferably with a pit file from odin pc
Click to expand...
Click to collapse
Mohamedselim, Thanks...
Will look into this..., any links by the way in regards to the "fresh firmware with a pit file"...?
Have you tried downloading and flashing a full Odin tar file to restore your device to stock?
imnuts said:
Have you tried downloading and flashing a full Odin tar file to restore your device to stock?
Click to expand...
Click to collapse
Yeap...!, I have tried this already, have had no promising results...
This is the only compatible version of a .pit file...;
http://forum.xda-developers.com/showthread.php?t=1642744
Can anyone provide me another one for the GT-p3113...?
Just checking in..., and wondering if anyone has a solution for this...?
Factory reset in stock recovery. So Odin a stock Rom and before u install anything custom, do a factory reset in recovery after u Odin back to stock. Then flash away.
I imagine you have alrdy tried a factory reset using a custom recovery.
WAIT!!! You don't have to factory reset, just reboot into CWM recovery ang go to mounts and storage>wipe internal storage. Confirm and reboot. You will lose anything on the sdcard but your apps will stay.
RomsWell said:
Factory reset in stock recovery. So Odin a stock Rom and before u install anything custom, do a factory reset in recovery after u Odin back to stock. Then flash away.
I imagine you have alrdy tried a factory reset using a custom recovery.
Click to expand...
Click to collapse
MultipleMonomials said:
WAIT!!! You don't have to factory reset, just reboot into CWM recovery ang go to mounts and storage>wipe internal storage. Confirm and reboot. You will lose anything on the sdcard but your apps will stay.
Click to expand...
Click to collapse
1. I am all over the Factory resets, and wipes.
2. Already tried Stock Rom(s).
3. I believe my problem is a bootloader, or partitioning script. (As this denies me access from inside settings>storage where I can view my allocated size, and Restore to Factory button. In addition in CWM, I am not allowed to mount/sdcard(internal), extSdCard is ok though. Also, I cannot plug Tab via USB to check contains on Internal or External sdcard, but I can remove the External to transfer data from it via sdcard slot on PC...)
Maybe you can recommend a good Stock Rom, so I can give that ago...
I was in the process last night, and could not get a good connection with Heimdall or Odin. I am now looking into driver issues, so...
Ok, so I was successful in taking RomsWell and MultipleMonomials advice, and was able to return my device back to "Normal" state, including "Stock Recovery". But I still have the original problem as in my request I asked in my first post...
I do however experience the inability to check my Storage properties under my Settings profile. When I attempt to click on this link it pauses for a second as if it wants to open up and perform its normal function, then reports an error "Unfortunately, Settings has stopped". Now at this point this is where I would have to mention another issue similar to this one, and that is at startup. When I first start the device up and it runs through its process of startup configuration. It will then report a list of programs that are prevented from running properly it as follows;
Unfortunately, the process android.process.media has stopped.
Unfortunately, My Files has stopped.
Unfortunately, Factory Test has stopped.
Unfortunately, MTP has stopped.
Click to expand...
Click to collapse
I think now, if I cannot get a sizable remedy..., is just to try and send it in Samsung so they can take a look at it...
Any suggestions...?
FYI; I have also tried connecting to Kies, but due to the inability to posses a "MTP" (Media Transfer Protocol), is the reason I cannot connect to my SdCard & extSdCard. I can "PTP" (Picture Transfer Protocol) into it, using "adb shell", but not using "MTP"...
So I do not know how much "MTP" has to do with this relationship of the other three items that I mentioned in my bullet list in my quote, but...
Anyway, I don't know what I am trying to say, but thank you two, for getting me this far...!
grassy-sneakers said:
1. I am all over the Factory resets, and wipes.
2. Already tried Stock Rom(s).
3. I believe my problem is a bootloader, or partitioning script. (As this denies me access from inside settings>storage where I can view my allocated size, and Restore to Factory button. In addition in CWM, I am not allowed to mount/sdcard(internal), extSdCard is ok though. Also, I cannot plug Tab via USB to check contains on Internal or External sdcard, but I can remove the External to transfer data from it via sdcard slot on PC...)
Maybe you can recommend a good Stock Rom, so I can give that ago...
I was in the process last night, and could not get a good connection with Heimdall or Odin. I am now looking into driver issues, so...
Click to expand...
Click to collapse
Did you try formatting internal storage in CWM?
MultipleMonomials said:
Did you try formatting internal storage in CWM?
Click to expand...
Click to collapse
I am not quite confident on how much this will work. As I have tried this multiple times to wipe "Wipe Factory/Data", "Wipe Cache", including all the partitions under the "Advance" section found in CWM Recovery. Even using TWRP Recovery.
Per this post; I just attempted to flash a "Stock Rom", but not before doing a factory/data, cache wipe using "Stock Recovery", including after a successful install...
No luck, the same problem still exist as above...
Ok, this was all just the rudest experience I put my self threw. As I have an HTC Evo 4g - cellphone and have become comfortable with installing ROM's, Kernels, and Updates.zips, as well as, other modification. All threw the Recovery designed for this particular device, and don't get me wrong there has been a couple of times. Maybe more than a couple, more like a few times I have installed incompatible downloads I find in the XDA forums. Which makes this screw up, difficult form me to know that as long as you can get into a Download/Bootloader or a modified Recovery designed for a particular device that was successful flashed correctly. Well the screw up are easily redeemed/recoverable.
So, to make a long story short. After having called Samsung Customer Care (the 1-800-SAMSUNG) number, it seems to have been a External SdCard getting in my way from having been real short from sending my Tab off to the repair department (where ever it is...). I in fact already had it in an envelope, all I needed was an address to send it to. Anyway the nice person on the other side of the phone requested that I remove my External SdCard, and confirm that I was able to get into my "Storage" tab under my settings. Well after success getting this option back, I then made the suggestion that maybe my Eternal SdCard is corrupt or incorrectly formatted. She then agreed maybe this is the case. After ending the phone call. I quickly restarted my Tab, again only to find out that I was no longer receiving the error messages like mentioned above, which is great, because after multiple flashes of "Stock Roms w/Stock Recovery", and forcing myself to believe that it was a system install error. It in fact the External SdCard in place preventing me from throwing my Tab against the wall / in the mail to Samsung Repair Center...
"Man what an ordeal...!!!"
Thanks to all that helped with the suggestions, as to what direction I most defiantly tried.
I am now in the process, since I am living back in Stock mode. To receive an OTA (Over The Air) Update, and am still in the process of seeing if this thing still possess any residual silent errors...
I will keep you posted.
If not, well it off to happy rooting for me...!!!
That is it, my problem is resolved. Damnedest thing this problem of mine, it seems the only thing I screwed up was the micro SdCard. to the point it was the cause of all the error I received when I started up the device, as well as when I attempted to access my storage through me settings options...!!!
Now re-rooted, and a happy camper, Cheers...!
Dear all,
I have flashed my MZ605 (32GB) using EOS 3.0 for MZ601 with TWRP and that has worked quite well for some time, but last week I was fiddling with the navigation app and the tablet suddenly froze. The only way to get it back to life was doing a volume-up+power. Now the system still boots: i get to the lock screen, but as soon as I unlock (no password, just swiping to the right), I receive a shower of f/c messages and no icons apear. The settings screen still seems to work, but since the stream of f/c messages doesn't stop, it's very hard to do anything at all. I tried all the standard stuff first: Flashing EOS 3.0 using TWRP and Factory Reset: It seems to do nothing at all. Everything stays the same! When trying to delete cache, userdata, etc. Right after displaying the message "updating partition details", it complains that it is not able to access certain files in /data/media (a bunch of mp3 files)
Figuring that something must be wrong with the filesystem, I fired up the console of TWRP and did an e2fsck (e2fsck -vfcp) on partition 8,9 and 10, resulting simply in "unable to set superblock flags". I tried formatting the thing by hand but when doing mke2fs, it acts like it it's creating the fs (you see the numbers fly by), but when mounting the fs again, nothing changed at all!
About the partition table: Accessing the kernel messages (dmesg) with ADB says that the primary gpt table is corrupt and will try to use the backup table. It then merrily continues booting. However, when checking the partition table with gdisk (using ADB): it says nothing is present. Using the recovery options show that the primary table contains garbage and the backup partition table doesn't seem to contain anything. :S This contrasts with the fact that kernel still sees the partitions and that they are mountable both when booting normally as well as with TWRP
As a last resort I downloaded RSDLite 5.7 and the most recent SBF image. It flashes the whole thing without any errors, but when booting the system: nothing changed at all???
For the tl;dr people: Sorry! In a nutshell: fs seems to be frozen: mke2fs does nothing, fastboot flash does nothing and even sbf flash doesn't do anything at all. However the device still boots, albeit with a shower of f/c on unlock screen.
Any suggestions what to? I have been googling for many days now and reading this forum. Nothing has helped so far...
My next try would be to redefine the gpt partition table using gdisk and then hope that'll fix the frozen that. After that I would of course do a wipe all and flash a new ROM. The problem is, I can't find the standard partition layout details for the Xoom anywhere, nor do I have any other ideas what to do in case this does not work
If anyone has any hint or idea, please let me know. Thanks!
Nobody?
If anyone could please tell me their partition layout, like start - end - type for each partition. It'd really appreciate it!
Thanks!
No one?
Hello,
have you fixed it ?
Nope
jkd said:
Hello,
have you fixed it ?
Click to expand...
Click to collapse
Unfortunately I haven't been able to fix it. I still have the tablet though, hoping that one day I will come across a fix. I have two theories as to what may have caused it:
1) Physicalically the write pin of the internal flash got disconnected
2) Somehow a readonly command was send to the flash and made it read-only. I don't know if this is possible neither how to undo it.
If you have a solution, please let me know. I'm also willing to do tests and experiments to try to solve the problem.
ioish said:
Unfortunately I haven't been able to fix it. I still have the tablet though, hoping that one day I will come across a fix. I have two theories as to what may have caused it:
1) Physicalically the write pin of the internal flash got disconnected
2) Somehow a readonly command was send to the flash and made it read-only. I don't know if this is possible neither how to undo it.
If you have a solution, please let me know. I'm also willing to do tests and experiments to try to solve the problem.
Click to expand...
Click to collapse
Actually I have the same problem, I have read several forums and I have not found an answer
jkd said:
Actually I have the same problem, I have read several forums and I have not found an answer
Click to expand...
Click to collapse
That's too bad
Did you by any chance install a custom rom or performed any non-official other update?
ioish said:
That's too bad
Did you by any chance install a custom rom or performed any non-official other update?
Click to expand...
Click to collapse
my xoom caracteristic:
- Recovery: TWRP v2.6.3.0 (RunAndHide05 Edition), I can not tell if it's a bigpart or no recovery. Also I am unable to change recovery is cwm or another version of TWRP. I always find my TWRP recovery v2.6.3.0.
- ROM omni: 4.4.2-20140102-1218 + 0100-wingray-HOMEMADE (I don't know if is bigpart rom)
- kernel:2.6.39.4-ElementalX-Xoom-2.1+
Hey there,
I have a Huawei Honor U8860, which is currently unable to finish any updates and my phone never gets past the Huawei logo.
Does anyone have any suggestions on how to fix this?
I was running the B929 rom and wanted to go back to B919 to try out custom roms. The downgrade patch required to go back down wasn't working for me (I have since found the right downgrade patch), so I reflashed the B929 rom and had a working phone again. I then went to replace the 'cust.img' so I could remove built in apps like Twitter. Rather than replacing, I deleted the old 'cust.img' and then went to paste the new one in. For some reason, the folder didn't have enough free space and I couldnt put the new cust.img into the folder. I rebooted and the phone was still working, but the folder/partition must have resized itself after I removed the cust.img. I thought by running an dload update, it would repartition the phone and reinstall the OS. I was wrong! :crying:
The B929 update got to about 90% complete and then said update failed. So I used the downgrade patch and then used the B919 update, which got to about 70% and then failed. But it did allow me to use the pink screen mode. The disk mounts and I can view the 'image' folder. But the disk that mounts is full with 0kb free. I think this is why the updates aren't finishing, the partition / folder with cust.img is just too small.
The sd_update.log in the dload folder says
Code:
notes:(dld_file_ptr != -1) !dload_sd_file_data_proc-(dld_retry >= DLOAD_RETRY) failed!
Is there any way I can repartition the phone without an OS? (Like using a customized update.app or something). Or is there anyway of formatting this disk (emmc?)
Thanks, donk165
if a mounted partition tells you there are 0 bytes free to write, I think its most likley that the mounting failed somehow and either is read only or the index of the empty spaces could not be read / is damaged.
try to look at the partitions with some partition tool like gparted, note how big the partitions are, and then in an file explorer select all files that are on the partiton and look how big they are all together - then compare the numbers..
Thank you for the reply!
I burnt an ISO of gparted and loaded it up. The 'Huawei eMMC device' is unallocated and has an unknown partition table. This is not good! Is it a simple case of creating a new table and recreating the partitions? I have no idea how this has happened. Something must have gone horribly wrong when I removed cust.img!
hmm, now that I checked gparted doesn't give a lot of info on the pink screen mounts...
see http://kaefert.is-a-geek.org/huawei_honor/pink_screen_mounts_gparted.png
"df -h" gives a nice picture of the partitions though:
Dateisystem Größe Benutzt Verf. Verw% Eingehängt auf
/dev/sdd1 240M 73M 167M 31% /media/kaefert/0422-A870
/dev/sdd12 378M 352M 27M 94% /media/kaefert/57f8f4bc-abf4-655f-bf67-946fc0f9f25b
/dev/sdd14 2,1G 738M 1,4G 36% /media/kaefert/3093-07CF
/dev/sdd6 128M 83M 45M 65% /media/kaefert/57f8f4bc-abf4-655f-bf67-946fc0f9f25b1
/dev/sdd13 882M 401M 482M 46% /media/kaefert/57f8f4bc-abf4-655f-bf67-946fc0f9f25b2
Click to expand...
Click to collapse
Right, ive got a live disc of ubuntu, and typed in 'df -h' command. My SDD1 is full, SDD14 is near enough empty and SDD13 is just too small. The SDD1 says it has 6 items, totalling 40.9 MB. but the df command says 240M? So, there is something up with the SDD1 I think.
/dev/sdd1 240M 240M 0 100% /media/ubuntu/5019-1D66
/dev/sdd12 375M 308M 67M 83% /media/ubuntu/57f8f4bc-abf4-655f-bf67-946fc0f9f25b
/dev/sdd14 2.1G 32K 2.1G 1% /media/ubuntu/7C3C-0BEC
/dev/sdd13 50M 8.4M 41M 17% /media/ubuntu/57f8f4bc-abf4-655f-bf67-946fc0f9f25b1
/dev/sdd6 128M 4.2M 124M 4% /media/ubuntu/57f8f4bc-abf4-655f-bf67-946fc0f9f25b2
Click to expand...
Click to collapse
Also, each mounted disk allows me to check the amount of free space available by right clicking then 'properties', the only one that doesnt allow me to do this is the 252mb volume with the image folder on it - SDD1.
Do you have any suggestions on how to fix this, or will this have to go to a service center?
Hello,
I have a nearly similar problem (see post..)
http://forum.xda-developers.com/showthread.php?t=2152416
Is this problem resolved? Can you tell me how did you do it?
Many thanks.. clint2rose
Hi there, I wasn't able to solve the issue, I have a hunch the flash memory on the phone might have failed. I dont have any suggestions for you, mine just wouldn't complete any Rom updates.
I've since got a new phone after selling old PC parts. I still have the honor and would like to fix it if possible. I'll check your thread for progress, good luck man!
Sent from my LG-P768 using xda app-developers app
I had exactly the same. I used Kaefert B919. When I tried it with the official B924 update it went well. Maybe there is something wrong with the B919 version? I can't find another one so its hard for me to try. Now running B924 as B870 did had some hickups too.
Edit: found another B919 but still the same issue. I can install B870 or B924, but not B919. Weird
honor without partition - partition list wanted
----Problem solved!-----
Good morning!
I got a complete dump of all
partitions, wrote all data with "dd"
under a linux-system into the
internal file system.
Everything works fine now!
Thank you!
android_paul said:
----Problem solved!-----
Good morning!
I got a complete dump of all
partitions, wrote all data with "dd"
under a linux-system into the
internal file system.
Everything works fine now!
Thank you!
Click to expand...
Click to collapse
Can you elabourate a little please? I still have my honor and would like to fix it if possible? What steps did you take to repair your phone?
step by step
donk165 said:
Can you elabourate a little please? I still have my honor and would like to fix it if possible? What steps did you take to repair your phone?
Click to expand...
Click to collapse
Sorry donk165, I've been off for a while.
This is, how I solved my problem:
1 boot device in pink-screen-mode
2 connect to a linux-machine
3 copy a bunch of image-files with linux-command "dd" from pc to phone
4 copy update.upp do dload-directory of sd-card
5 reboot, watch system-flash and enjoy a running honor.
Good luck!
android_paul said:
Sorry donk165, I've been off for a while.
This is, how I solved my problem:
1 boot device in pink-screen-mode
2 connect to a linux-machine
3 copy a bunch of image-files with linux-command "dd" from pc to phone
4 copy update.upp do dload-directory of sd-card
5 reboot, watch system-flash and enjoy a running honor.
Good luck!
Click to expand...
Click to collapse
Hello, I know this issue is very old. . But I have same problem. You wrote "copy a bunch of image-files " which image files? I search on internet, but I found only 2.3 GB Stock Rom Backup for CWM. Please can you help me ?( On ubuntu I see two devices: first folder have recovery.img etc. and other device is damaged. I formatted it and tried dload. When it %75-80, UPDATE FAILED!.