I have rooted pico with cm10 and pandora kernel and here is the problem: When phone is idling it doesn't update clock (or at least doesn't do it often enough). This tends to be problematic because I use my phone as an alarmclock. So if I set alarm it usually rings when I next time use the phone when that time has passed or like 30mins late. Any ideas how to solve this?
clock problem
same problem is with me
but i installed 4.2 rom clock in 4.1, it solved the issue
mettalix said:
same problem is with me
but i installed 4.2 rom clock in 4.1, it solved the issue
Click to expand...
Click to collapse
Sounds good, but may I ask where did you get 4.2 clock + how to install it?
Artsie said:
Sounds good, but may I ask where did you get 4.2 clock + how to install it?
Click to expand...
Click to collapse
i extracted it from one of 4.2 roms and replaced it with original clock in system apps
mettalix said:
i extracted it from one of 4.2 roms and replaced it with original clock in system apps
Click to expand...
Click to collapse
Okay I did this, (I set permissions to rw-r--r-- is that correct?) and rebooted but now when I open clock it just says that unfortunately clock has stopped.
Edit.
Never mind... Wiping app data solved that. Now I just has to wait and see if it works.
It seems that it didn't solve the problem for me. Any other ideas?
Artsie said:
I have rooted pico with cm10 and pandora kernel and here is the problem: When phone is idling it doesn't update clock (or at least doesn't do it often enough). This tends to be problematic because I use my phone as an alarmclock. So if I set alarm it usually rings when I next time use the phone when that time has passed or like 30mins late. Any ideas how to solve this?
Click to expand...
Click to collapse
+1 for me too on CMMINI10
Sent from my HTC Explorer A310e using xda premium
Related
I have CM 7.2 flashed rom, but nowadays I troubled with the problem that when rings my phone vibrates sometime and then reboots automatically. Is there any setting problem or any downloaded app problem?
Sent from my LG-P500
akshay thakare said:
I have CM 7.2 flashed rom, but nowadays I troubled with the problem that when rings my phone vibrates sometime and then reboots automatically. Is there any setting problem or any downloaded app problem?
Sent from my LG-P500
Click to expand...
Click to collapse
kernel problem.
Flash this or any one of these. I personally use DJNoXD's kernel, v2.5.2-ta-vsyncOff-signed
akshay thakare said:
I have CM 7.2 flashed rom, but nowadays I troubled with the problem that when rings my phone vibrates sometime and then reboots automatically. Is there any setting problem or any downloaded app problem?
Sent from my LG-P500
Click to expand...
Click to collapse
You are lucky enough to know that you have reboots on incoming calls, many don't..........CM7.2 is buggy!
Change the ROM or try changing Kernel as 'nextdoorboy' says.
Thank you really very much, now I updated my kernel to 2.6.35.14,so the problem of camera crash and rebooting is likely to solved ..
Sent from my LG-P500
Some times the frequency of your cpu are the cause of all that crashes and force closing and stuff like that...dont set your max frequency too hi.
Hi!
Sometimes when I update app from market (including my own app that works ok when updated manually) I get another icon for the same program, and the old one stops working (with not installed error) but stays there until I reset device. Of course it is not easily reproduced so I can't say what triggers that behaviour, but suspect that could have something with apps installed on sdcard.
I have 2.3.3 version of Android
Reboot
Sent from my LG-P500 using xda app-developers app
What do you mean by reset??
It might be due to some theme you have installed!!!
rr0yy said:
What do you mean by reset??
It might be due to some theme you have installed!!!
Click to expand...
Click to collapse
After I turn on and off it is all ok, but I still don't know why it is happening, and how to prevent it.
I don't wan't that to happen on some other device with my app, since I think that regular user doesn't turn phone off often
There is no themes or anything UI installed besides LG stuff that comes with a phone
dkovacev said:
After I turn on and off it is all ok, but I still don't know why it is happening, and how to prevent it.
I don't wan't that to happen on some other device with my app, since I think that regular user doesn't turn phone off often
There is no themes or anything UI installed besides LG stuff that comes with a phone
Click to expand...
Click to collapse
which launcher , rom, theme etc etc ? be specific
karthiknayak94 said:
which launcher , rom, theme etc etc ? be specific
Click to expand...
Click to collapse
It is standard rom that comes from LG for LG-P500
Android 2.3.3
kernel 2.6.35.10
build GRI40
sw version LG-P500-V20g
dkovacev said:
It is standard rom that comes from LG for LG-P500
Android 2.3.3
kernel 2.6.35.10
build GRI40
sw version LG-P500-V20g
Click to expand...
Click to collapse
Dude thats normal.....
I keep getting random freezes with R21 of Jelly Time.
I did a clean install so it can't be an issue with previous build files messing up this build. I haven't had any such problem with any previous build.
The freezing happens at random, sometimes when I am unlocking the phone but also happens when the phone is doing nothing. The buttons will all light up and then nothing works. It is particularly an issue for me as my volume button is broken so I can't restart the phone though the safe method, I have to pul the battery out.
Does anyone else have the same issue or give any advice as to how to fix the issue?
My desire S is:
S-Off
Hboot 7
The radio is the one from the HTC ICS release
JellyTime R21
The stock kernel for R21
No changes made to any of the system files
Sent from my Nexus 7 using xda app-developers app
mzr92 said:
I keep getting random freezes with R21 of Jelly Time.
I did a clean install so it can't be an issue with previous build files messing up this build. I haven't had any such problem with any previous build.
The freezing happens at random, sometimes when I am unlocking the phone but also happens when the phone is doing nothing. The buttons will all light up and then nothing works. It is particularly an issue for me as my volume button is broken so I can't restart the phone though the safe method, I have to pul the battery out.
Does anyone else have the same issue or give any advice as to how to fix the issue?
My desire S is:
S-Off
Hboot 7
The radio is the one from the HTC ICS release
JellyTime R21
The stock kernel for R21
No changes made to any of the system files
Click to expand...
Click to collapse
Is that ROM set up with tweaks for underclocking and undervoltage? If so then it may be your device is too susceptible to undervolting - so try to change it by decreasing the undervoltage by 0.25V or 0.5V.
SimonTS said:
Is that ROM set up with tweaks for underclocking and undervoltage? If so then it may be your device is too susceptible to undervolting - so try to change it by decreasing the undervoltage by 0.25V or 0.5V.
Click to expand...
Click to collapse
Thanks for the advice, there's no option to under volt so I don't think that's included in the ROM.
Sent from my Nexus 7 using xda app-developers app
The only thing bothering me about the jellybean update, is now swiping left or right, doesn't stop at the first/last pages. I can't stand the fact that it cycles infinitely through them all.
Does anyone know if there's a setting to change this behaviour???
danny6869 said:
The only thing bothering me about the jellybean update, is now swiping left or right, doesn't stop at the first/last pages. I can't stand the fact that it cycles infinitely through them all.
Does anyone know if there's a setting to change this behaviour???
Click to expand...
Click to collapse
Its works like you want on Viper v2 rom.
Darknites said:
Its works like you want on Viper v2 rom.
Click to expand...
Click to collapse
STOCK JELLYBEAN
(I do not need, or want to root my device)
danny6869 said:
STOCK JELLYBEAN
(I do not need, or want to root my device)
Click to expand...
Click to collapse
Then there is nothing you can do.
It's my first time to actually take the plunge and install a custom ROM and I seem to have encountered a problem. I followed the instructions to install RemICS ROM and initially everything went well. I turn on the device and everything seems to work except for the preinstalled MX Player and Apollo. That won't be a problem since maybe I could download replacements. The problem comes with locking the screen. I press on the lock button and the screen turns off. However, pressing the lock or home button does not turn on the screen, and the device proceeds to just heat up and use battery. I've tried returning to the stock ROMs and there seems to be no problem. Just with RemICS. Note though that I am not using 5.7.2 RemICS since it cant be downloaded for bandwidth reasons, I'm on 5.7.1. Thank you!
chanchan05 said:
It's my first time to actually take the plunge and install a custom ROM and I seem to have encountered a problem. I followed the instructions to install RemICS ROM and initially everything went well. I turn on the device and everything seems to work except for the preinstalled MX Player and Apollo. That won't be a problem since maybe I could download replacements. The problem comes with locking the screen. I press on the lock button and the screen turns off. However, pressing the lock or home button does not turn on the screen, and the device proceeds to just heat up and use battery. I've tried returning to the stock ROMs and there seems to be no problem. Just with RemICS. Note though that I am not using 5.7.2 RemICS since it cant be downloaded for bandwidth reasons, I'm on 5.7.1. Thank you!
Click to expand...
Click to collapse
i think 5.7 or 5.6 or 5.2 the most stable till now ,
and All 5.x.x is not for everyday use it's just to testing new Mod's ,
i now use 5.2 And every think is ok and good ...
i will build new rom with next alpha6 with HW fixing ....
this bug you talk about is from new Tweaks i think it's too much so i remove the big one
abderrezak said:
i think 5.7 or 5.6 or 5.2 the most stable till now ,
and All 5.x.x is not for everyday use it's just to testing new Mod's ,
i now use 5.2 And every think is ok and good ...
i will build new rom with next alpha6 with HW fixing ....
this bug you talk about is from new Tweaks i think it's too much so i remove the big one
Click to expand...
Click to collapse
Thanks for your reply. I'm downloading the 5.7 ROM now. Will the same TouchWiz and GApps files I downloaded with the 5.7.1 ROM work here? Also, is my understanding correct that I first install the RemICS zip (199MB), then install the Fix-RemICS-A4-A5 zip (25MB), then the FixSU zip in that order?
chanchan05 said:
Thanks for your reply. I'm downloading the 5.7 ROM now. Will the same TouchWiz and GApps files I downloaded with the 5.7.1 ROM work here? Also, is my understanding correct that I first install the RemICS zip (199MB), then install the Fix-RemICS-A4-A5 zip (25MB), then the FixSU zip in that order?
Click to expand...
Click to collapse
Exactly ,
abderrezak said:
Exactly ,
Click to expand...
Click to collapse
Awesome! Thanks a lot! :good:
install new 5.7.8 version
AndreRaptor said:
install new 5.7.8 version
Click to expand...
Click to collapse
My sister is using the phone now which I flashed back to DDLF2 because she had no phone to use. I'll see to it when she gets a new one. I'm using an S3mini now.
Sent from my GT-P6200 using xda app-developers app