Related
I know you had to push a reboot file to get it working on some Hero ROMs. What about the EVO version?
The Hero way works.
FIRST, install Quickboot from the market. Run it and enable it in the superuser permissions screen.
Download the reboot.txt file I attached and rename it to "reboot" (take off the ".txt"). Move it to where ever your "android-sdk-windows/tools" folder is.
Connect your phone to your computer (make sure it is "charge only") and boot into recovery...
Code:
adb shell
reboot recovery
Start your "Windows-recovery.bat" (if using windows) and let it do it's thing in the CMD prompt. Keep that prompt open.
In a CMD prompt OTHER THAN the one opened by recovery.bat type...
Code:
adb shell
mount /dev/block/mtdblock4 /system
exit
This will keep your system mounted but get you out of shell. Now type...
Code:
adb push reboot /system/bin
adb shell
cd /system/bin/
chmod 755 reboot
reboot
Once you're back up, run Quickboot and choose either reboot or recovery (both will now work). It takes about 5 seconds to start rebooting but it does work.
What does this do? does it make recovery stick?
watzone69 said:
The Hero way works.
Download the reboot.txt file I attached and rename it to "reboot".
Once you're in recovery...
Code:
adb push reboot /system/bin
adb shell
cd /system/bin/
chmod 755 reboot
reboot
EDIT: It takes about 5 seconds to start rebooting but it does work.
Click to expand...
Click to collapse
Woo! Thanks!
Edit: Didn't seem to work for me. Damn.
joeavery2 said:
What does this do? does it make recovery stick?
Click to expand...
Click to collapse
No, this just lets you use the QuickBoot app from the Market to reboot your phone.
TheBiles said:
Didn't seem to work for me. Damn.
Click to expand...
Click to collapse
Code:
adb shell
cd /system/bin/
ls
See if the reboot file actually got pushed to the directory. If so, try this:
Code:
chmod 755 /system/bin/reboot
The only other thing I can think of is that I installed Quickboot BEFORE doing all of this. Did you get the SU permission screen when you tried to run it?
Any luck??
Did I mention that the Quickboot "recovery" button works also? Much easier than opening a shell and typing it in.
Of course you still have to run the recovery.bat to get the custom recovery but at least it's one less step.
Still no dice. I also already had QuickBoot installed and granted it root permission prior to pushing the reboot file.
any update to this?
thanks
joey3002 said:
any update to this?
thanks
Click to expand...
Click to collapse
It doesn't work for you?
I updated my earlier post to give more instructions for getting into recovery and pushing the "reboot" file. I hope it helps!
I have a ROM ready to go that changes a couple icons and quickboot works with no probelm. Wifi tether is the only thing I don't have working. I can post it if you would like. I also removed sprint apps and some widgets
I made an update zip that got Quickboot working for me. This is using watzone69's reboot file.
Run from Toast's recovery. http://forum.xda-developers.com/showthread.php?t=690762
watzone69 said:
It doesn't work for you?
Click to expand...
Click to collapse
yes i got it working last night by reading this thread from top to bottom.. then repeated.. thanks
Ok... If your wimax isn't working and you want to downgrade to try to get it working this is how to do it...
1st get all of the files like you want to do Toast's Part-2. link: http://forum.xda-developers.com/showthread.php?t=701835
Then do this part:
STEP 2~FLASHING MTD PARTITION TO ENABLE DOWNGRADE:
- download all files posted above
- unzip the flash_image.zip and the mtd-eng.zip
- put the flash_image and mtd-eng.img on the root of your sdcard
- go into shell on ur pc and do:
adb shell
cat /sdcard/flash_image > /data/flash_image
chmod 755 /data/flash_image
/data/flash_image misc /sdcard/mtd-eng.img
- this should only take a second or two
- now put the PC36IMG.zip on the root of your sdcard
- power off the phone
STEP 3~FLASHING ENG BUILD:
- hold volume down + power to boot into hboot
- it should now find and verify the PC36IMG.zip on the root of your sdcard. itll show a blue status bar on the top right of the screen.
- after a minute or so it will ask u if u wanna flash SAY YES
- affter it flashes the PC36IMG.zip it will ask if you wanna reboot. SAY YES
After if finally boots you should see HTC quietly brilliant which hangs forever but it should eventually get past it. Once it does you will have the oldest everything. This is a beta build and has a bunch of tools but just do an upgrade to root like you normally would. I would suggest going to .6 then upgrading to the latest 47 from there.
Hope that this helps someone.
P.S. is anyone willing to dump all of the tools that are included in this rom. It might be helpful for the other devs.
Thats the hard way... but yeah it'l work.
Why is everyone so hype on adb everything...?
Tell me the easy way. I would love to do it instead.
kthejoker20 said:
Thats the hard way... but yeah it'l work.
Why is everyone so hype on adb everything...?
Click to expand...
Click to collapse
It's just easier to copy and paste stuff, even typing on a real keyboard. It's a pain in the ass doing it via terminal emulator with the lack of a physical keyboard on our Evo's.
Can anyone confirm if this helps fix the 4g issue?
krosemm said:
Can anyone confirm if this helps fix the 4g issue?
Click to expand...
Click to collapse
If you used the unrevoked, no it wont.
There is no fix for 4g from unrevoked yet.
Neotelos_com said:
If you used the unrevoked, no it wont.
There is no fix for 4g from unrevoked yet.
Click to expand...
Click to collapse
I used the toast method. And if i'm not mistaken I should flash roms w/o the 1.47.651.1 OTA update after downgrading right?
Nope, I try this method and it is not working. Some how the new OTA encrypted a code that any lower version will not over write it.
You don't have root access to even copy/paste or push the files to /data. I tried this and got a permission denied error message.
How do you input adb shell into Vista, I clicked "start", "run" and type "cmd" it bring up C:\users\XXXXX\ cd c:\android hit "enter"
then I type
c:\android>adb remount
Access is denied
Please advise what I did wrong. thanks
It worked for me... you have to make sure that when you enter the su command in adb to look at your phone. There should be a super user permission box that pops up. Accept it and youll be able to adb. It went fine for me after that.
urcboss07 said:
How do you input adb shell into Vista, I clicked "start", "run" and type "cmd" it bring up C:\users\XXXXX\ cd c:\android hit "enter"
then I type
c:\android>adb remount
Access is denied
Please advise what I did wrong. thanks
Click to expand...
Click to collapse
1) Put your phone on USB Debug
2) On your Phone make sure the Ninja(SuperUserPermission) is set to prompt you when you have a request.
3) go to your PC and type in adb shell
4) type in SU
5) Once do you that you will see a prompt from the Ninja asking for a request. Allow for it. And it will remember from that point forward.
6) Look at your cmd prompt screen for a # - if you have it you have full access.
Then so what commands you have been given to do.
It can also be done from the Android Terminal Emulator but some might not like working with a smaller screen I like it myself. Makes me feel geeky
mrmomoman said:
1) Put your phone on USB Debug
2) On your Phone make sure the Ninja(SuperUserPermission) is set to prompt you when you have a request.
3) go to your PC and type in adb shell
4) type in SU
5) Once do you that you will see a prompt from the Ninja asking for a request. Allow for it. And it will remember from that point forward.
6) Look at your cmd prompt screen for a # - if you have it you have full access.
Then so what commands you have been given to do.
It can also be done from the Android Terminal Emulator but some might not like working with a smaller screen I like it myself. Makes me feel geeky
Click to expand...
Click to collapse
This would only work if after the messup your still has root access. Some people have root and the "SU" will work but for the people w/o root will get access denied.
also
From above (I hate quoting) have you tried going to your tools folder inside your android folder and from there try your adb commands?
If you applied the OTA sent from Sprint, you lost root access. There will be no Ninja in the programs folder, because it was a new rom that the was flashed with the OTA. Root access has been closed for those that downloaded the update. If you try and type su, you will get permission denied.
Those of you that still have the root and superuser rights, DON'T DOWNLOAD THE OTA!! You are in a better position then the rest of us. I wanted the good battery life, so that's why I did it.
I hold no responsibility to how you use or not use this info and if you brick phone - you do this at your own risk
There is a couple away you can go about gaining root access with this phone I have tested all 3 ways but only had success with 2 of them.
a) You can download 'z4root' from the Android Market (If is still available) or search XDA forums for it.
b) Search the XDA forums for 'SuperOneClick' which requires mono to work on Linux. I have read people that have had success with 'SuperOneClick' but that was not the case for me.
c) My preferred method:
Prerequisite:
knowledge of Linux and Terminal
knowledge of ADB (guide available in forums)
I did all this using Debian (testing) 64bit, Android SDK.
Creating correct permissions to access the phone via USB:
i) create
Code:
/etc/udev/rules.d/51-android.rules
ii) in the file put
Code:
SUBSYSTEM=="usb", ATTR{idVendor}=="12d1", MODE="0666"
iii) then
Code:
chmod a+r /etc/udev/rules.d/51-android.rules
iv) restart udev or reboot
Downloading and/or Installing required software:
1) Downloading and installing the android-sdk from: developer.android.com/sdk/index.html
2) Downloading and extracting 'SuperOneClick' (you will only need these 5 files: rageagainstthecage, sqlite3, su, busybox and superuser.apk)
3) Copy rageagainstthecage, sqlite3, su, busybox and superuser.apk into the platform-tools directory of android-sdk. Put phone in debug mode.
4) From a terminal (command line) change to the android/platform-tools directory and carefully do these steps.
Check to see if adb can see your phone properly:
Code:
./adb devices
You should see the serial number of you device, if you see bunch of '?' you have done something wrong.
Now for the fun part rooting the phone: <= no phun intended hehe
Code:
./adb push rageagainstthecage /data/local/tmp/rageagainstthecage
Code:
./adb shell
Code:
cd /data/local/tmp
Code:
chmod 0755 rageagainstthecage
Code:
./rageagainstthecage
5) Now wait until you get kicked out from adb before you do the following:
Code:
./adb shell
If everything worked now you should see a "#" instead of the "$" you saw previously in the adb shell which means you shouldn't get "permission denied" in the following steps:
Code:
mount -o rw,remount /dev/block/mdtblock4 /system
Code:
exit
Code:
./adb push su /system/bin/su
Code:
./adb push busybox /system/bin/busybox
Code:
./adb push sqlite3 /system/bin/sqlite3
Code:
./adb push Superuser.apk /system/app/Superuser.apk
Code:
./adb shell
Code:
cd /system/bin
Code:
chmod 4755 su
Code:
chmod 4755 busybox
Code:
chmod 4755 sqlite3
Code:
./adb reboot
Now you should be able to use apps like 'Cache Cleaner NG', 'Root Explorer', 'SetCPU' etc that require root access to work correctly.
Enjoy
Guide reflash FW for those who did some damage:
* Download from here that you want to install the FW
* Copy the folder in the microSD DLOAD (with the file inside UPADATE.APP)
* From phone off, Volume + Hold down RED BUTTON UP and power button.
* start the firmware upgrade, take a few minutes and then restart the phone . is a bit slow, do not be afraid, let him work and then back on (like the first time)
Help to get into recovery mode:
* down the 'volume up 'and 'green button'and then switch the device
Guide to bootloader mode:
* switch off, press and hold power button + volume down + red key
Overclock
Can this fone be oveclocked
SethIsHere said:
Can this fone be oveclocked
Click to expand...
Click to collapse
yes it can be OCed, I recommend using setCPU from the market
SethIsHere said:
Can this fone be oveclocked
Click to expand...
Click to collapse
Yes it can, to a Maximum of 600mhz (0.6 ghz) on the stock kernel
setCPU is no longer available on the market for free afaik.
Also can someone better translate the instructions to get into recovery mode? i can barely make sense of the above instructions ^^^
.produkt-R said:
Also can someone better translate the instructions to get into recovery mode? i can barely make sense of the above instructions ^^^
Click to expand...
Click to collapse
does this help:
http://forum.xda-developers.com/showpost.php?p=10371747&postcount=5
quail said:
does this help:
http://forum.xda-developers.com/showpost.php?p=10371747&postcount=5
Click to expand...
Click to collapse
Helped, Thanks.
Although after reading the entire page, i wonder if i should have a Recovery ROM installed. But i wonder if the phone will be left in it's current working state after installing it ?
i used z4root, worked fine for me
quail said:
Code:
chmod 4755 su
Code:
chmod 4755 busybox
Code:
chmod 4755 sqlite3
Click to expand...
Click to collapse
I think only "su" should be 4755 (setuid root), busybox and sqlite3 should just be 0755? Thanks for the instructions.
pb05life said:
i used z4root, worked fine for me
Click to expand...
Click to collapse
Ok I figured it ill shut up you have to use crappy dos command prompt and type everything in manually install proggies lol Google must die!
quail said:
Creating correct permissions to access the phone via USB:
i) create
Code:
/etc/udev/rules.d/51-android.rules
ii) in the file put
Code:
SUBSYSTEM=="usb", ATTR{idVendor}=="12d1", MODE="0666"
iii) then
Code:
chmod a+r /etc/udev/rules.d/51-android.rules
iv) restart udev or reboot
Click to expand...
Click to collapse
Anyone know this part for windows XP?Not linux?
I got to rageagainstthecage and it says permission denied.
fvckyougooglescammer said:
So would you tell us, exactly how you did it?
Without using the market place?
Because I have tried 100 things downloaded all that junk wasted 5 hours.
And I do not know how to run the z4root on my phone.
I do not want to install another ROM.
I do not know why you can not run z4root and a file manager from the SD card I have tried methods with the SDK they are total rubbish.
Once again *without* using the market place.
Thanks
Click to expand...
Click to collapse
Download it mediafire.com/u8150
Sent from my Ideos using XDA App
could you explain why you prefer this way instead using z4root?
nitro-ale said:
could you explain why you prefer this way instead using z4root?
Click to expand...
Click to collapse
I have Z4root on the phone and its supposedly rooted.
Yet, I can install apps from PC onto phone, but can not uninstall them.
Adb always gives me failure.
And if I try from shell it always says permission denied.
tilal6991 said:
Download it
Sent from my Ideos using XDA App
Click to expand...
Click to collapse
Hi thanks downloaded it fine its on the phone but this doesn't tell me how to remove apps.
I have been able to install but not remove adb always says failure.
Thanks man,
Just worked perfectly on my IDEOS brought from 2degrees in NZ.
The copy of SuperOneClick that I downloaded contained a file called su-v2 instead of su. In order to get the hack to work I had to rename su-v2 to su before running ./rageagainstthecage . Pretty obvious, but it might help someone out.
Thanks
fvckyougooglescammer said:
I have Z4root on the phone and its supposedly rooted.
Yet, I can install apps from PC onto phone, but can not uninstall them.
Adb always gives me failure.
And if I try from shell it always says permission denied.
Click to expand...
Click to collapse
I followed your instructions and installed SetCPU to test my phone was rooted. It worked great! Thanks.
I still have a problem. When I try adb root it still says "adbd cannot run as root in production builds". I'm trying this to be able to control my phone with pc mouse/keyboard with androidscreencast.
Any suggestions will be much appreciated.
Answering to myself: I updated my phone with FUSIONideos 1.5 and now adb runs as root without problems.
Z4root
http://forum.xda-developers.com/showthread.php?t=833953
Worked for me
Does it removes simlock I have Huawei U8150 IDEOS Android phone with career lock ( Simlock ), so will this remove it
can there be a batch file / command / app for all this, too techy out there
also how to setup the environment to run these commands, i m windows user can i do it ?
This is an FAQ for the Huawei Ideos as there have been many questions on how to do the same things. Hopefully this should help. There are other FAQs but this one tries to compile as many as it can into one FAQ.
Feel free to reply to this if there are any questions or if you want me to make any additions. The FAQ won't be complete to begin with but I will add as I get time.
One thing I will say is that I WON'T TAKE RESPONSIBITY IF YOU DAMAGE YOUR PHONE. I AM PROVIDING THE INFORMATION AND WILL TRY TO HELP YOU IF SOMETHING BAD HAPPENS BUT I CAN'T TAKE ANY RESPONSIBILITY
1. How to root the IDEOS
This can be done quite simply by adapting what quail wrote:
There is a couple away you can go about gaining root access with this phone I have tested all 3 ways but only had success with 2 of them.
a) You can download 'z4root' from here (WORKS)
b) Search the XDA forums for 'SuperOneClick' which requires mono to work on Linux. I have read people that have had success with 'SuperOneClick' but that was not the case for me. (HAVEN'T CHECKED)
c) My preferred method: (HAVEN'T CHECKED)
Prerequisite:
knowledge of Linux and Terminal
knowledge of ADB (guide available in forums)
I did all this using Debian (testing) 64bit, Android SDK.
Creating correct permissions to access the phone via USB:
i) create
Code:
/etc/udev/rules.d/51-android.rules
ii) in the file put
Code:
SUBSYSTEM=="usb", ATTR{idVendor}=="12d1", MODE="0666"
iii) then
Code:
chmod a+r /etc/udev/rules.d/51-android.rules
iv) restart udev or reboot
Downloading and/or Installing required software:
1) Downloading and installing the android-sdk from: developer.android.com/sdk/index.html
2) Downloading and extracting 'SuperOneClick' (you will only need these 5 files: rageagainstthecage, sqlite3, su, busybox and superuser.apk)
3) Copy rageagainstthecage, sqlite3, su, busybox and superuser.apk into the platform-tools directory of android-sdk. Put phone in debug mode.
4) From a terminal (command line) change to the android/platform-tools directory and carefully do these steps.
Check to see if adb can see your phone properly:
Code:
./adb devices
You should see the serial number of you device, if you see bunch of '?' you have done something wrong.
Now for the fun part rooting the phone: <= no phun intended hehe
Code:
./adb push rageagainstthecage /data/local/tmp/rageagainstthecage
Code:
./adb shell
Code:
cd /data/local/tmp
Code:
chmod 0755 rageagainstthecage
Code:
./rageagainstthecage
5) Now wait until you get kicked out from adb before you do the following:
Code:
./adb shell
If everything worked now you should see a "#" instead of the "$" you saw previously in the adb shell which means you shouldn't get "permission denied" in the following steps:
Code:
mount -o rw,remount /dev/block/mdtblock4 /system
Code:
exit
Code:
./adb push su /system/bin/su
Code:
./adb push busybox /system/bin/busybox
Code:
./adb push sqlite3 /system/bin/sqlite3
Code:
./adb push Superuser.apk /system/app/Superuser.apk
Code:
./adb shell
Code:
cd /system/bin
Code:
chmod 4755 su
Code:
chmod 4755 busybox
Code:
chmod 4755 sqlite3
Code:
./adb reboot
Now you should be able to use apps like 'Cache Cleaner NG', 'Root Explorer', 'SetCPU' etc that require root access to work correctly.
Enjoy
2. How to flash the Ultrakiller Recovery Image
Now this has been covered many times but there have been a lot of problems with the BSOD on the IDEOS. A few days ago Ultrakiller came up with a solution that works regardless of the LCD type. Now this was distributed as an IMG file so many people were confused so here is a link to one with everything you need included. All I did was remove the amon'ra image and copied the Ultrakiller recovery IMG to the folder and edited the scripts to point to the new file.
After you download the file:
* Put your device in bootloader mode - turn it off, then press the power button while holding the 'Volume Down' and 'End (Red)' keys (Yes, bootloader is just the IDEOS logo) WHILE YOUR DEVICE IS PLUGGED IN
* WINDOWS - double click 'install-recovery-windows.bat'
* MAC - Open a terminal window to the directory containing the files, and type 'chmod +x install-recovery-mac.sh' followed by './install-recovery-mac.sh'
* LINUX - Open a terminal window to the directory containing the files, and type 'chmod +x install-recovery-linux.sh' followed by './install-recovery-linux.sh'
See Q3 if you have Windows and the prompt hangs on "Waiting for Device"
3. How to solve problems with drivers on Windows in bootloader mode?
1. Unplug your phone
2. Download and install PDANet from here - at the end of the setup it will tell you to plug in your phone - do that
3. Put the phone into bootloader (See Q2 above)
4. Go to device manager and right click on "Android 1.0" and click "Update drivers"
5. Click "No, not this time" and Next
6. When it asks you where to look for drivers point it to PDANet's install location
7. Hopefully it should find the driver and prompt you to install it - it will take some time
8. You can now access your device in bootloader!
Thanks to the following people:
Quail for the base of the guide and the ROM I'm using - it's amazing BTW
Ultrakiller for the recovery image
Changelog:
21/01/2010: Initial writeup
22/01/2010: Added Q3 and made some minor changes
i unfortunately deleted a system app and upon restarting my phone it wont boot.....it keeps hanging at the startup and reboots.. help me how to system restore...
Hi - the Ultrakiller recovery IMG in the ZIP from the Link above is "Ultrakiller.img.img". Dunno if it didnt work cause of this - sry didnt test, just downloaded new Ultrakillers "UltraJack-Recovery_v4.6.2.img", saved into that folder and changed the .bat to "fastboot-windows.exe flash recovery UltraJack-Recovery_v4.6.2.img" and it worked for me Even superuser.apk didnt work for usb-root but z4root does it perfect and DroidExplorer showing files now .
Thanks so far to all investing their time here
P.S.: the HUAWEI background of Ultrakillers recovery is very delicious
General guide to Flash ROM
Can you please provide a detailed guide for flashing Huawei Ideos. Because it is super guide. So it must contain this topic also.
I want to flash official ROM on following link:
http://forum.xda-developers.com/wiki/index.php?title=Huawei_U8150_IDEOS
Waiting for your response
yrnehukuht said:
i unfortunately deleted a system app and upon restarting my phone it wont boot.....it keeps hanging at the startup and reboots.. help me how to system restore...
Click to expand...
Click to collapse
Dear have u find out the solution of this problem?? COZ im also suffering from this if u find it then plz tell me [email protected]
I have downloaded a rom from xda-developers wiki from this link
http://forum.xda-developers.com/wiki/index.php?title=Huawei_U8150_IDEOS
then updated my device software by going in to update mode(press vol up + end key + power button) .
This step returned me my original recovery.
But I am not going to recommend it bcoz i am facing problems like my cd drive which is automatically displayed has become inaccessible.
I am having problem to copy files to sd card.
My upgrade mode is not working now.
all these things were working immediately after the above mentioned process but I am now stuck with these things.
I think it is because i have flashed lower version number of rom on phone.
If you want to recover recovery mode only then I have successfully flashed UltraJack-Recovery 5.2.1 from this link
http://forum.xda-developers.com/showthread.php?t=860189&page=24
Inform about your progress
Thanx. Very useful
Hi guys. I am in a lot of trouble with my ideos.
Tried installing a custom ROm using ROM manager and it failed, although the original ROM is still there and its booting up and working perfectly.
However, when i try to boot into recovery, only the lit blackscreen shows.
I have tried everything from running ULTRAjack recovery on windows(which only shows 'waiting for device' on cmd, with the pdanet drivers installed) to ubuntu(which shows 'waiting for device' on Amon-ra recovery and permission denied on ULTRAjack).
Could it be i didnt root the device properly since i used z4 root?
Any more ideas?
900/2100 or 850/1700/1900/2100
Hello, How do I tell which sub-model my U8150 is please? Either HSDPA 900 / 2100 / AWS or HSDPA 850 / 1900 / 2100 / 1700. baseband = 22201003; build no.= U8150V100R001C183B825; IMEC = 355093040562676; IMEC-SV = 39.
Check out your fcc id suffix. I have heard there is a b version and a d version.
hi do flashing many roms affects my ideos mobile?
netskink said:
Check out your fcc id suffix. I have heard there is a b version and a d version.
Click to expand...
Click to collapse
All I got is a U8510-1, no letter... any thoughts?
Unlock u8150
Hello.
i have a T-Mobile Ideos u8150, also known as Comet.
it is locked to T-Mobile and requests a pin code when using another sim card.
is there a way to unlock the phone?
please help me...
thank you.
Enable USB Debugging & One Click Root with Unlock Root Tool
The official CWM has problems in mounting SD-EXT, thus, Jaggyrom and other custom roms (except stock) won't work properly and your phone will reboot everytime you install apps. You'll also get a lot of app crashes because Dalvik cache can't move properly. Now here's how to flash back to Yannou90's recovery using only Android Terminal Emulator.
__________
THINGS YOU NEED:
1. Your HTC Explorer must be rooted
2. Flash_image and Recovery (You can download it here on this thread)
3. Root File Explorers (Like Root Explorer and ES File Manager, at play store)
STEPS:
1. Download the zip file, read the readme inside the zip, and extract flash_image and recovery.img to the root of your SD Card
2. Download Root Explorer from play store, you can use ES file explorer if you want a root file explorer for free
3. Using your root explorer, copy flash_image to /system/bin/ but before you do that, make sure you mount /system/bin/ as R/W.
4. After copying flash_image, set flash_image permissions to rwxrwxrwx
5.Download Android Terminal Emulator on Play store
6. Run Terminal Emulator and open up preferences.
7. at the initial command, put this:
export PATH=/system/bin:$path
7. Go back to Terminal and Type su
8. Superuser should prompt. Accept it.
9. If you saw # it means you are running it as root, which is that we really needed. If you saw $ , it's not running as root and do type su again.
10. now type this:
flash_image recovery /sdcard/recovery.img
11. Wait for it and if it's done, boot your phone to recovery.
12. CONGRATULATIONS AND YOU ARE BACK TO YANNOU90's RECOVERY
DOWNLOAD LINK:
Flash_Image and Recovery.zip
mrchezco1995 said:
......
2. Flash_image and Recovery (You can download it here on this thread)
......
Click to expand...
Click to collapse
Sorry, on trying to download the following message shows up.
"The page you have requested does not exist. Please check your spelling and try again."
Can you please re-upload the Flash_image and Recovery.zip ?
Download link 404..
Sent from my HTC desire_HD using xda app-developers app
beegeevee said:
Sorry, on trying to download the following message shows up.
"The page you have requested does not exist. Please check your spelling and try again."
Can you please re-upload the Flash_image and Recovery.zip ?
Click to expand...
Click to collapse
Deivi_Z said:
Download link 404..
Sent from my HTC desire_HD using xda app-developers app
Click to expand...
Click to collapse
Download link fixed. Uploaded it to mediafire instead. Thanks for reminding guys.
permission denied
followed all the steps....still got the "Permission Denied" message
followed all the steps....still got the "Permission Denied" message
Click to expand...
Click to collapse
Check superuser and make sure Terminal is allowed. And type su in all lowercase, not uppercase like SU. That wont work
Sent from my HTC Explorer using XDA
mrchezco1995 said:
The official CWM has problems in mounting SD-EXT, thus, Jaggyrom and other custom roms (except stock) won't work properly and your phone will reboot everytime you install apps. You'll also get a lot of app crashes because Dalvik cache can't move properly. Now here's how to flash back to Yannou90's recovery using only Android Terminal Emulator.
__________
THINGS YOU NEED:
1. Your HTC Explorer must be rooted
2. Flash_image and Recovery (You can download it here on this thread)
3. Root File Explorers (Like Root Explorer and ES File Manager, at play store)
STEPS:
1. Download the zip file, read the readme inside the zip, and extract flash_image and recovery.img to the root of your SD Card
2. Download Root Explorer from play store, you can use ES file explorer if you want a root file explorer for free
3. Using your root explorer, copy flash_image to /system/bin/ but before you do that, make sure you mount /system/bin/ as R/W.
4. After copying flash_image, download Android Terminal Emulator on Play store
5. Run Terminal Emulator and open up preferences.
6. at the initial command, put this:
export PATH=/system/bin:$path
7. Go back to Terminal and Type su
8. Superuser should prompt. Accept it.
9. If you saw # it means you are running it as root, which is that we really needed. If you saw $ , it's not running as root and do type su again.
10. now type this:
flash_image recovery /sdcard/recovery.img
...
After this step what I get is as follows
usage: flash_image partition file.img
sh-3.2#
Click to expand...
Click to collapse
Superuser worked fine on terminal. But also got permission denied on last command in terminal.. should I push it via ADB?
You can simply flash the recovery using fastboot. Download this ZIP: http://forum.xda-developers.com/attachment.php?attachmentid=913094&d=1329843100 (courtesy of jaggyjags), start your phone in fastboot mode (ROM Manager might be able to reboot your phone into this mode, otherwise just turn it off, pull out the battery and replace it, then turn on while holding volume down and choose "FASTBOOT" from the menu that appears), then run "recovery.bat" from inside the ZIP. It's simpler than having to mess with adding files to /system/bin.
FYI, you need to set permissions on flash_image to allow it to be executed. I think typing this in the terminal emulator should work:
Code:
chmod 777 /system/bin/flash_image
(otherwise use your file manager to change the permissions to give read, write and execute permissions to all users i.e. tick all the boxes). This is the missing step from your guide to make it work from terminal emulator.
Also, you don't need multiple apps, you can just use terminal emulator for it all by using the "cp" command e.g. if flash_image is on the root of your SD card, use the following commands:
Code:
su
mount -o remount,rw -t yaffs2 /dev/block/mtdblock3 /system
cp /sdcard/flash_image /system/bin/flash_image
then use the chmod command above and then the original command from the first post.
[BTW, if you're wondering, the first command identifies as root, the second remounts /system as RW, the last copies the file]
So the full process for terminal emulator ONLY, would be this:
Code:
su
mount -o remount,rw -t yaffs2 /dev/block/mtdblock3 /system
cp /sdcard/flash_image /system/bin/flash_image
chmod 777 /system/bin/flash_image
flash_image recovery /sdcard/recovery.img
{rm /sdcard/flash_image
rm /sdcard/recovery.img}
The commands in the {} are optional and just delete the two files from your SD card. The 2nd and 3rd commands can be excluded if you copy flash_image with a root capable file manager, as can the 4th if you change permissions with the file manager.
(This post ended up being much longer than I originally intended. I was just going to post the first paragraph, but figured I may as well post how to make it work the way the OP described as well - or at least what I think should make it work, I haven't actually tested the full process [I have tested the exact same process with other binaries {viewmem, tcpdump} and it works perfectly. Provided the usage of flash_image as in the OP is correct and works, this method will work])
EDIT: You also shouldn't have to change the initial command, /system/bin is already specified in $PATH. If it wasn't, pretty much nothing on the phone will work.
SifJar said:
You can simply flash the recovery using fastboot. Download this ZIP: http://forum.xda-developers.com/attachment.php?attachmentid=913094&d=1329843100 (courtesy of jaggyjags), start your phone in fastboot mode (ROM Manager might be able to reboot your phone into this mode, otherwise just turn it off, pull out the battery and replace it, then turn on while holding volume down and choose "FASTBOOT" from the menu that appears), then run "recovery.bat" from inside the ZIP. It's simpler than having to mess with adding files to /system/bin.
FYI, you need to set permissions on flash_image to allow it to be executed. I think typing this in the terminal emulator should work:
Code:
chmod 777 /system/bin/flash_image
(otherwise use your file manager to change the permissions to give read, write and execute permissions to all users i.e. tick all the boxes). This is the missing step from your guide to make it work from terminal emulator.
Also, you don't need multiple apps, you can just use terminal emulator for it all by using the "cp" command e.g. if flash_image is on the root of your SD card, use the following commands:
Code:
su
mount -o remount,rw -t yaffs2 /dev/block/mtdblock3 /system
cp /sdcard/flash_image /system/bin/flash_image
then use the chmod command above and then the original command from the first post.
So the full process for terminal emulator ONLY, would be this:
Code:
su
mount -o remount,rw -t yaffs2 /dev/block/mtdblock3 /system
cp /sdcard/flash_image /system/bin/flash_image
chmod 777 /system/bin/flash_image
flash_image recovery /sdcard/recovery.img
{rm /sdcard/flash_image
rm /sdcard/recovery.img}
The commands in the {} are optional and just delete the two files from your SD card. The 2nd and 3rd commands can be excluded if you copy flash_image with a root capable file manager, as can the 4th if you change permissions with the file manager.
(This post ended up being much longer than I originally intended. I was just going to post the first paragraph, but figured I may as well post how to make it work the way the OP described as well - or at least what I think should make it work, I haven't actually tested the full process [I have tested the exact same process with other binaries {viewmem, tcpdump} and it works perfectly. Provided the usage of flash_image as in the OP is correct and works, this method will work])
EDIT: You also shouldn't have to change the initial command, /system/bin is already specified in $PATH. If it wasn't, pretty much nothing on the phone will work.
Click to expand...
Click to collapse
Thank You. U completed this thread. Decided to use fastboot (faster) instead of terminal emulator way.
SifJar said:
You can simply flash the recovery using fastboot. Download this ZIP: http://forum.xda-developers.com/attachment.php?attachmentid=913094&d=1329843100 (courtesy of jaggyjags), start your phone in fastboot mode (ROM Manager might be able to reboot your phone into this mode, otherwise just turn it off, pull out the battery and replace it, then turn on while holding volume down and choose "FASTBOOT" from the menu that appears), then run "recovery.bat" from inside the ZIP. It's simpler than having to mess with adding files to /system/bin.
FYI, you need to set permissions on flash_image to allow it to be executed. I think typing this in the terminal emulator should work:
Code:
chmod 777 /system/bin/flash_image
(otherwise use your file manager to change the permissions to give read, write and execute permissions to all users i.e. tick all the boxes). This is the missing step from your guide to make it work from terminal emulator.
Also, you don't need multiple apps, you can just use terminal emulator for it all by using the "cp" command e.g. if flash_image is on the root of your SD card, use the following commands:
Code:
su
mount -o remount,rw -t yaffs2 /dev/block/mtdblock3 /system
cp /sdcard/flash_image /system/bin/flash_image
then use the chmod command above and then the original command from the first post.
So the full process for terminal emulator ONLY, would be this:
Code:
su
mount -o remount,rw -t yaffs2 /dev/block/mtdblock3 /system
cp /sdcard/flash_image /system/bin/flash_image
chmod 777 /system/bin/flash_image
flash_image recovery /sdcard/recovery.img
{rm /sdcard/flash_image
rm /sdcard/recovery.img}
The commands in the {} are optional and just delete the two files from your SD card. The 2nd and 3rd commands can be excluded if you copy flash_image with a root capable file manager, as can the 4th if you change permissions with the file manager.
(This post ended up being much longer than I originally intended. I was just going to post the first paragraph, but figured I may as well post how to make it work the way the OP described as well - or at least what I think should make it work, I haven't actually tested the full process [I have tested the exact same process with other binaries {viewmem, tcpdump} and it works perfectly. Provided the usage of flash_image as in the OP is correct and works, this method will work])
EDIT: You also shouldn't have to change the initial command, /system/bin is already specified in $PATH. If it wasn't, pretty much nothing on the phone will work.
Click to expand...
Click to collapse
Mine worked for me on terminal without any problems, but thanks for filling up what I just missrf for others. Hehe
Sent from my HTC Explorer using XDA
mrchezco1995 said:
10. now type this:
flash_image recovery /sdcard/recovery.img
11. Wait for it and if it's done, boot your phone to recovery.
]
Click to expand...
Click to collapse
I did upto this point when I write and enter this string nothing happens it gives me another sh-3.2# to write in. How would I know that the Yannou90 recovery has completed??? I'm stuck
SherazHashmi said:
I did upto this point when I write and enter this string nothing happens it gives me another sh-3.2# to write in. How would I know that the Yannou90 recovery has completed??? I'm stuck
Click to expand...
Click to collapse
Why don't you try step 3 from jaggyjag's rooting tutorial....
Sent from my HTC Explorer A310e using xda app-developers app
My HTC Explorer's recovery was stuck green logo, but what thing that helped to get back my clockword recovery
is just downloading you recovery file and renamed it recovery.img
And...
I used Android SDK tool, and used the below command in command prompt and then I reboot the mobile, and I got back:
fastboot flash recovery recovery.img
Thanks for this valuable thread
SU not found !
after changing the INITIAL COMMAND
i restarted d terminal and now the initial command just gets printed and after that i typed 'su'...d output was 'su not found'..
wats d problem ???
I even tried d fastboot method...dats epic, whenever i try to install any .zip from it dis is wat i see
"Installing update...
Installation aborted."
Plz suggest nythng else other than REFLASHING it...its just that sumthng is restricting it to install :laugh:
hi! I have a question regarding recoveries... i have a recovery by yannou90 installed on my htc explorer, will this recovery work for other roms such as CM9 and CM10? It worked well with JaggyJags rom (3.2.1).. i am wondering if I need to switch to other recovery prior to installing CM roms.. thanks!
iamwin said:
hi! I have a question regarding recoveries... i have a recovery by yannou90 installed on my htc explorer, will this recovery work for other roms such as CM9 and CM10? It worked well with JaggyJags rom (3.2.1).. i am wondering if I need to switch to other recovery prior to installing CM roms.. thanks!
Click to expand...
Click to collapse
Yeah, ll work for all rom installation...
Hit :thumbup: if i helped...
R. SAINT said:
Yeah, ll work for all rom installation...
Hit :thumbup: if i helped...
Click to expand...
Click to collapse
got it man!
the steos for flashing the recovery worked for me but after 2 weeks now it responds to nothing when i try to wipe dalwik cache or perform any other funtion it displays nothing only the green title saying yonnou90 recovery.
Mayank T said:
the steos for flashing the recovery worked for me but after 2 weeks now it responds to nothing when i try to wipe dalwik cache or perform any other funtion it displays nothing only the green title saying yonnou90 recovery.
Click to expand...
Click to collapse
My initial response to such a situation would be start the phone in fastboot mode and then flash the recovery from there. Download the ZIP here: http://forum.xda-developers.com/attachment.php?attachmentid=913094&d=1329843100, extract it and double click "recovery.bat" once the phone is in fastboot mode (start phone holding volume down, select fastboot from menu instead of recovery).
This assumes you're on Windows. If you're on Mac/Linux, find the fastboot binary for your platform and run the following command in a terminal:
Code:
./fastboot flash recovery recovery.img
where recovery.img is taken from the ZIP I linked above.
Alternatively, you could install a more up-to-date recovery such as TWRP or a newer build of CWM (not sure of links for the latest versions of either, but have a look around the forum and you should find them. Also some older builds of CWM had bugs [hence this thread exists], but I think the newer builds work fine on the Explorer; not 100% sure as I still use yannou90's build)