[Q] stock recovery for qmobile noir a7 - General Questions and Answers

my problems are two
1. i want to root my device (its description is given hereunder)
2. i lost my original stock recovery of my phone while i tried to install custom cwm recovery through sp flash tools in hope of gaining root access somehow. NOW MY PHONE DOES NOT BOOT INTO RECOVERY (screen flashes two times and shuts down, and i have to reboot it into normal mode in normal way).
PLEASE HELP SOMEBODY
my phone specs are below :-
Hardware : MT6577 (MT6517 is Fake!)
Model : A7
Build number : SV1.0
Build date UTC : 20130225-052859
Android v : 4.1.1
Baseband v: MAUI.11AMD.W12.22.SP.V15, 2013/01/08 17:54
Kernel v : 3.4.0 ([email protected]) (gcc version 4.6.x-google 20120106 (prerelease) (GCC) ) #1 SMP Mon Feb 25 13:27:29 CST 2013

search incpak a7 root in google
hafeez2001 said:
my problems are two
1. i want to root my device (its description is given hereunder)
2. i lost my original stock recovery of my phone while i tried to install custom cwm recovery through sp flash tools in hope of gaining root access somehow. NOW MY PHONE DOES NOT BOOT INTO RECOVERY (screen flashes two times and shuts down, and i have to reboot it into normal mode in normal way).
PLEASE HELP SOMEBODY
my phone specs are below :-
Hardware : MT6577 (MT6517 is Fake!)
Model : A7
Build number : SV1.0
Build date UTC : 20130225-052859
Android v : 4.1.1
Baseband v: MAUI.11AMD.W12.22.SP.V15, 2013/01/08 17:54
Kernel v : 3.4.0 ([email protected]) (gcc version 4.6.x-google 20120106 (prerelease) (GCC) ) #1 SMP Mon Feb 25 13:27:29 CST 2013
Click to expand...
Click to collapse

stock recovery for qmobile a7 attached
i've attached the stock recovery image :good:

Thanks
kansari921 said:
i've attached the stock recovery image :good:
Click to expand...
Click to collapse
Thank you solved my problem too

no problem
Nibs.ahmed said:
Thank you solved my problem too
Click to expand...
Click to collapse
no problem

Stock Boot.img?
kansari921 said:
no problem
Click to expand...
Click to collapse
can you please give me stock boot.img? please i need to remove the incpak's logo in my startup screen. is there since i nstalled a custom rom from inc pak. if you know how to remove it please let me know. thanks

Nibs.ahmed said:
can you please give me stock boot.img? please i need to remove the incpak's logo in my startup screen. is there since i nstalled a custom rom from inc pak. if you know how to remove it please let me know. thanks
Click to expand...
Click to collapse
and also if you can give me stock boot_logo from system/media/image?
Thanks

I can't
Nibs.ahmed said:
and also if you can give me stock boot_logo from system/media/image?
Thanks
Click to expand...
Click to collapse
my internet is too slow and limited to 10 gb i can't upload that
sorry for that

flash this zip with twrp
i'm uploading for u to remove the inc pak logo a zip file please flash that "only qmobile noir a7"

(bow)
kansari921 said:
i'm uploading for u to remove the inc pak logo a zip file please flash that "only qmobile noir a7"
Click to expand...
Click to collapse
Thanks Bro!
You solved my problem in under half Mb. (bow)

plz tell me how to get rom in qmobile a7. recovery given by incpak does not work
Nibs.ahmed said:
Thanks Bro!
You solved my problem in under half Mb. (bow)
Click to expand...
Click to collapse
plz. help me.
I can't go into cwm recovery or twrp recovery in mobile a7

tell me
khawajaakram said:
plz. help me.
I can't go into cwm recovery or twrp recovery in mobile a7
Click to expand...
Click to collapse
first tell me which recovery you've installed

Try this
You can try this rom and find the way to reroot and CWM again
http://www.incpak.com/tech/raven-rom-4-1-1-for-noir-a7/

khawajaakram said:
plz. help me.
I can't go into cwm recovery or twrp recovery in mobile a7
Click to expand...
Click to collapse
Download MTK tools from Play Store. Make sure you download the latest version.
Download Recovery.img File of your phone. then do the following steps.
Instructions:
1. Download the recovery and Put it in root of your SDCARD
2. Open Mobile uncle tools and select Recovery Update
3. Tap on Recovery.img file Then Tap Yes
4. It will ask for reboot... Dont reboot now
5. Tap recovery img file again And select YES
6. It will ask for Reboot again. Now Select YES
7. The phone will reboot into recovery.
8. Done

khawajaakram said:
plz. help me.
I can't go into cwm recovery or twrp recovery in mobile a7
Click to expand...
Click to collapse
i flashed twrp recovery bt incpak.

Lost Qmobile A7 stock rom of 4.1.1
I rooted and removed some bloatware from A7, but now I want to unroot and sale the mobile. But I don't have stock rom. Any help?

Any help for a link to A7 stock rom
Any help for a link to A7 stock rom

Related

Help ! Please!

Hey guys , I am pretty much new to this stuff want some guidance on 'Rooting the device'
Here are the details of my phone
Model : GTI9003
firmware 2.3.6
Baseband I9003DDLE1
Build number Gingerbread DDLF2
Kernel version 2.6.35.7-CL1153545
[email protected]#1
I just need a small brief step by step description on how to root my device , and if the rooting is unsuccessful is it possible to revert the process?
Rahul
refer to this thread http://forum.xda-developers.com/showthread.php?t=1331253
pratik_s said:
refer to this thread http://forum.xda-developers.com/showthread.php?t=1331253
Click to expand...
Click to collapse
So now i have DDFL2 i should choose
"DDLF2_CFROOT-05-07-2012.tar (CWM 5.0.2.8)
DDLF2-CFROOT-30-06-2012.tar "
?
and how do we work with .tar files?
Use the latest one ... DDLF2_CFROOT-05-07-2012.tar
You need to flash it using odin.
laksy said:
So now i have DDFL2 i should choose
"DDLF2_CFROOT-05-07-2012.tar (CWM 5.0.2.8)
DDLF2-CFROOT-30-06-2012.tar "
?
and how do we work with .tar files?
Click to expand...
Click to collapse
.
use the latest, download the odin and on the PDA field click it and find the CF ROOT.tar that u downloaded..and flash it to ur phone.. make sure u're phone is in download mode simultaneosly press vol down+home button+power button..after flashing the tar file wait till it reboots..
hit the thanks button if i helpde u..:laugh:
Working!
I tested this rooting on my Galaxy SL I9003 with latest Indian update I9003DDLE1 and it works fine.
Download Odin from
http://dl.xda-developers.com/attach...1781bc67/5013aa18/5/8/1/9/1/3/Odin3-v1.85.zip
I ran into some errors with latest version of Odin. V1.85 worked just fine.
1. Download Odin v1.8.3 or grater (it is a single .exe file) and CFRoot for DDLF
2. run it with Administrative Privelages (win 8/7/Vista)
3. restart your phone in Download Mode by pressing [Vol Down + Home + Power button for > 3 sec] a yellow Exclamation Mark will come on your mobile's Screen.
4. connect your phone(Wait for drivers to get installed) and now in Odin you can see a yellow small block with Com : **
5. click the Bootloader tab and cselect the downloaded file (*.tar)
6. Click Start and it will auromatically flash and reboot your phone , and That's It !!
You are Now Rooted !!
NOTE :: Do not tangle with any settings other than what is there in the screen shorts ..
!! DO IT ON YOUR OWM RISK !!
Click Thanks if you like it )
laksy said:
Hey guys , I am pretty much new to this stuff want some guidance on 'Rooting the device'
Here are the details of my phone
Model : GTI9003
firmware 2.3.6
Baseband I9003DDLE1
Build number Gingerbread DDLF2
Kernel version 2.6.35.7-CL1153545
[email protected]#1
I just need a small brief step by step description on how to root my device , and if the rooting is unsuccessful is it possible to revert the process?
Rahul
Click to expand...
Click to collapse

Unbrick Android

Hi Friends I rooted my phone some days ago and today i tried to install chainfire3d but something went wrong during installing a driver from chainfire it rebooted and then stuck on samsung logo.. I can go to download mode and recovery mode but cant boot... i Think it's bricked... Now Please Friends give me step by step procedure to UNBRICK my phone..
My phone is Samsung Galaxy Pocket Neo Duos S5312 India...
Samsung Galaxy Pocket Neo Duos GT-S5312
OS:- Jelly Bean
Android Version:- 4.1.2
Baseband ver:- S5312DDAME4
kERNEL vERSION:- 3.0.15-1189709
[email protected] #1
Thu May 9 19:54:31 KST 2013
Build No:- JZO54K.S531212DDAME4
Please give me Step by Step process nof Unbricking my Phone... Thank you in Advance...
www.am27 said:
Hi Friends I rooted my phone some days ago and today i tried to install chainfire3d but something went wrong during installing a driver from chainfire it rebooted and then stuck on samsung logo.. I can go to download mode and recovery mode but cant boot... i Think it's bricked... Now Please Friends give me step by step procedure to UNBRICK my phone..
My phone is Samsung Galaxy Pocket Neo Duos S5312 India...
Samsung Galaxy Pocket Neo Duos GT-S5312
OS:- Jelly Bean
Android Version:- 4.1.2
Baseband ver:- S5312DDAME4
kERNEL vERSION:- 3.0.15-1189709
[email protected] #1
Thu May 9 19:54:31 KST 2013
Build No:- JZO54K.S531212DDAME4
Please give me Step by Step process nof Unbricking my Phone... Thank you in Advance...
Click to expand...
Click to collapse
what kind of recovery is it? the stock recovery it came with or a custom recovery like TWRP or CWM?
Rep Unbrick Android
Trozzul said:
what kind of recovery is it? the stock recovery it came with or a custom recovery like TWRP or CWM?
Click to expand...
Click to collapse
its stock recovery... I dont know what CWM, TWRP recovery is....
BTW Thanks for a fast reply.
the method
i know your problem dude this exactly same happen to me it happen because we are trying to install chainfire 3d in jellybean ,,ohh dude chainfire 3d is not for jelly bean or ics thats it corrupts system image
bro if u are new then you should know what is custom recovery it gives the full control for ur recovery means you can instal rom in ur phone with that recovery like installing windows i computer
HOW TO INSTALL CWM RECOVERY IN YOUR PHONE
I. Before You Begin
1. As always, back up everything you care about from your device before you start.
2. Charge your device to 75% or more before you begin.
3. Make sure you have the necessary drivers installed before you begin. If you are not sure, install Samsung Kies that should take of care of things for you.
II. Necessary Downloads
1. Odin_v3.07.zip
2. CWM-recovery-s5310-ODIN.tar.md5 [Link available on Step #2 of this post]
III. Flashing the Custom Recovery
1. Extract the Odin_v3.07.zip file you downloaded above to a folder on your desktop.
2. From the extracted folder, double-click on Odin3 v3.07.exe to run the tool.
3. Put your device into Download mode. To do this, power down your device, and press and hold the Volume Down + Home + Power buttons until you enter Download mode.
4. Click on PDA button, locate CWM-recovery-s5310-ODIN.tar.md5 you downloaded above and click on OK to load it on Odin. The ID:COM field on Odin should now light up yellow to signify that your device is connected and recognized properly. If not, reinstall Samsung Kies and try again.
5. Make sure that the Re-Partition and Flash Lock are unchecked; this is important as you might brick your device if these options are ticked!
6. Click on Start.
7. Once done, reboot your device.
You now have ClockworkMod Recovery installed on your Galaxy Pocket Neo!
and after download stock rom for ur phone and install it
.
.
.
.
go there [/B][/QUOTE]
if u dont want this mess up , just go to service center and spend some money
and if u like my lines please say thanxxx nd like my page fully tweaked on facebook
well I m confused at first i have to do flash of CWM custom recovery and then stock ROM? ? ? ? ... i saw in some videos and some tutorials they said direct ROM flash i mean no CWM direct flashing with stock ROM using ODIN... Also can i try oneclick unsoftbric will it work? ??
after flashing CWM will it work i mean will it unbrick... ? ? or i have to flash with stock ROm after that..
Also my phone is Galaxy pocket neo duos Gt s5312 not s5310 however both have same configuration but will it safe to do i.e. :- flashing with s5310 cwm recovery with s5312... ?
Try to flash direct to stock ROM download from samsung-updates / samfirmware with GT S5312 device
With Odin 3.7
hope this will normalize your phone.
Hey....now i am facing the same problem with my GT S5312 due to that Chainfire3D. so, did u get solve it? Help me up bro please.

s7562 clone mtk6572 in dead...wrong rom..and format...help me!

s7562 clone mtk6572 in dead...wrong rom..and formathelp me!
help me have a clone s7562 with mtk6572 and I put another firmware ...
Now the phone is dead ...no logo show. I can not get into recovery or factory mode.
The computer recognizes it when you connect to usb.
I tried other firmware from something similar but not working DRAM failed error
HEPL ME PLS!
Hardware : MTK
Model : GT-S7562
Build number : IMM76D.B9388ZMAMA2
Build date UTC : 20140408-074633
Android v : 4.2.2
Baseband v: MOLY.WR8.W1315.MD.WG.MP.V1.P5, 2014/03/18 18:20
Kernel v : 3.4.5 ([email protected]) (gcc version 4.6.x-google 20120106 (prerelease) (GCC) ) #1 SMP Wed Dec 11 10:34:14 CST 2013
Use SP flash tool and find a rom on needrom and try to flashed!!
there are allot off tutorials on youtube an xda to use sp flash tool, if your pc still detects the phone then you are safe!
Best of luck
still dead?
galiano666 said:
s7562 clone mtk6572 in dead...wrong rom..and formathelp me!
help me have a clone s7562 with mtk6572 and I put another firmware ...
Now the phone is dead ...no logo show. I can not get into recovery or factory mode.
The computer recognizes it when you connect to usb.
I tried other firmware from something similar but not working DRAM failed error
HEPL ME PLS!
Hardware : MTK
Model : GT-S7562
Build number : IMM76D.B9388ZMAMA2
Build date UTC : 20140408-074633
Android v : 4.2.2
Baseband v: MOLY.WR8.W1315.MD.WG.MP.V1.P5, 2014/03/18 18:20
Kernel v : 3.4.5 ([email protected]) (gcc version 4.6.x-google 20120106 (prerelease) (GCC) ) #1 SMP Wed Dec 11 10:34:14 CST 2013
Click to expand...
Click to collapse
Is your phone still dead bro?
Fix for dead phone
firebelias12 said:
Is your phone still dead bro?
Click to expand...
Click to collapse
Format the phone with flash sptool
load scatter file, make sure you firmware is for your phone
Dont tick check box Ex preloader, cache, usrdata.
IF your phone refuse to power on dislpay then flash preloader & android

[Q] i need help to root my phone please

Hi everyone.
I came here looking for some advice.
I have got a Lenovo Alps M7 model MT6572 based phone, with Android 4.4.2, with the specifications:
Hardware : MT6572
Model : M7
Build number : A10E_AX_CHT_S7_MTH_V02_10042015
Build date UTC : 20150410-100306
Android v : 4.4.2
Baseband v: MOLY.WR8.W1315.MD.WG.MP.V36.P3, 2015/01/08 16:13
Kernel v : 3.4.67 ([email protected]) (gcc version 4.7 (GCC) ) #1 SMP
Anyways, I'm looking for a way to root it. I've managed to backup the ROM but when I use MTK Droid Tools (2.5.3) on my boot.img image to insert CWM on it, I get the same error as other people here:
--->>> Connect to device <<<---
--- ERROR :No find KernelGZ
--- ERROR :No Split Boot Image
And I can't seem to find any pointers on this. Yes, I've tried running MTK Droid Tools as an administrator.
What can I do to fix it? Is there a way to do this manually on Linux? Perhaps mounting the boot.img filesystem and modifying it directly in Linux?
Thanks in advance for your help.
I've attached my boot.img and factory recovery to see if someone wants to take a look at it.
Is any other tool in order to compile a custom recovery image from the boot.IMG ? Thank you in advance
Finally I was able to compile a custom recovery from the stock recovery image,to flash it and boom the problem solved! I would like to thank this warm and caring community, for helping me so actively! Please keep it up
anhrax said:
Finally I was able to compile a custom recovery from the stock recovery image,to flash it and boom the problem solved! I would like to thank this warm and caring community, for helping me so actively! Please keep it up
Click to expand...
Click to collapse
Brother plz tell me too

[Completed] Help wanted to flash custom recovery and root my device. Trying for a week. HELP!!

I'm using a VIVO y22 device. It's internal storage is too low & so I want to root my phone to extend its internal storage. But I'm having problems in rooting the device.
NO automatic rooting softwares are working on my device. Tried several of such softwares.
So in order to manually root the phone I need the help of Custom recoveries. I generated a CWM recovery file for my device using the MTK droids tool since my device is an MTK device. (MT6582)
But I am unable to flash it on my device. When I tried to flash it via fastboot (with all the adb and fastboot drivers properly and installed and well verified) with the command: Fastboot flash recovery (filename).img, it showed the following error: Partition recovery not support flash.
I then tried to flash the recovery img using SP flash tools with the proper scatter file of my device well loaded. It too showed an error: PMT changed for ROM it must be downloaded.
The question is that is there any other method for rooting my device?
If not can you please guide me to solve the problems that I am facing while trying to flash my device with the recovery image?
I have previously rooted 4 devices successfully and have flashed custom recoveries in all of them.
But I can't root this device. I can't search online for help with this specific device as it is unpopular.
Here are the details regarding my phone:
BRAND: VIVO
Model : Y22
Manufacturer: BBK
Software Version: PD1309W_EX_A_2.7.3
Kernel Version: 3.4.5
Compile time: 6/4/2015
Operating System: Funtouch OS_1.0
Android Version: 4.2.2
Mediatek Version: MT 6582
Here are the details that are shown about my device in the MTK droid tool:
Hardware : MT6582
Model : vivo Y22
Build number : ALPS.JB5.MP.V1.6
Build date UTC : 20150604-135456
Android v : 4.2.2
Baseband v: MOLY.WR8.W1315.MD.WG.MP.V11.P19, 2014/12/18 20:35
Kernel v : 3.4.5 ([email protected]) (gcc version 4.6.x-google 20120106 (prerelease) (GCC) ) #1 SMP Thu Jun 4 21:45:55 CST 2015
I am thus kindly requesting you guys to help me regarding this root problem I am facing with my device.
Thanks in Advance.
akash21499 said:
I'm using a VIVO y22 device. It's internal storage is too low & so I want to root my phone to extend its internal storage. But I'm having problems in rooting the device.
NO automatic rooting softwares are working on my device. Tried several of such softwares.
So in order to manually root the phone I need the help of Custom recoveries. I generated a CWM recovery file for my device using the MTK droids tool since my device is an MTK device. (MT6582)
But I am unable to flash it on my device. When I tried to flash it via fastboot (with all the adb and fastboot drivers properly and installed and well verified) with the command: Fastboot flash recovery (filename).img, it showed the following error: Partition recovery not support flash.
I then tried to flash the recovery img using SP flash tools with the proper scatter file of my device well loaded. It too showed an error: PMT changed for ROM it must be downloaded.
The question is that is there any other method for rooting my device?
If not can you please guide me to solve the problems that I am facing while trying to flash my device with the recovery image?
I have previously rooted 4 devices successfully and have flashed custom recoveries in all of them.
But I can't root this device. I can't search online for help with this specific device as it is unpopular.
Here are the details regarding my phone:
BRAND: VIVO
Model : Y22
Manufacturer: BBK
Software Version: PD1309W_EX_A_2.7.3
Kernel Version: 3.4.5
Compile time: 6/4/2015
Operating System: Funtouch OS_1.0
Android Version: 4.2.2
Mediatek Version: MT 6582
Here are the details that are shown about my device in the MTK droid tool:
Hardware : MT6582
Model : vivo Y22
Build number : ALPS.JB5.MP.V1.6
Build date UTC : 20150604-135456
Android v : 4.2.2
Baseband v: MOLY.WR8.W1315.MD.WG.MP.V11.P19, 2014/12/18 20:35
Kernel v : 3.4.5 ([email protected]) (gcc version 4.6.x-google 20120106 (prerelease) (GCC) ) #1 SMP Thu Jun 4 21:45:55 CST 2015
I am thus kindly requesting you guys to help me regarding this root problem I am facing with my device.
Thanks in Advance.
Click to expand...
Click to collapse
Hello,
Thanks for using XDA Assist.
There's no dedicated forum for your device here in XDA.Try posting your query in Android Q&A,Help and Troubleshooting or in one of the noob friendly Q&A thread here->[Ask Any Question][Newbie Friendly] .Experts there may be able to help you!
Good Luck
___
v7
XDA Assist

Categories

Resources