I recently bought Motorola Droid 2 Global Verizon.
I unlocked it and put my sim in it, and everything work perfectly fine except for one thing:
When i make or get calls, i can't hear anything and so as the other side of the phone
and when i make calls there is no ring tone but it is calling and also there is a really poor signal.
Any help? thanks!
ben_yaa said:
I recently bought Motorola Droid 2 Global Verizon.
I unlocked it and put my sim in it, and everything work perfectly fine except for one thing:
When i make or get calls, i can't hear anything and so as the other side of the phone
and when i make calls there is no ring tone but it is calling and also there is a really poor signal.
Any help? thanks!
Click to expand...
Click to collapse
Well the poor signal just looks that way because Verizon makes GSM signal look lower than it is. if you open your build.prop file, you can edit the line
Code:
ro.mot.phonemode.vzwglobalphone=1
into a 0 instead of 1 and it will show the actual signal.
As for the calling, I don't know. GSM calling works fine for me on AT&T's network for both 2G and 3G. Sorry :/
Droid Global A696
A friend of mine gave me a brand new Global 2 that was never activated. It has a Verizon Sim in it and my carrier is T-Mobile. I would like to know where you got the unlock code from. There's allot of sites our there claiming 100% guarantee but I don't know who to trust. Also how hard would this phone be to get on T-Mobile? Thanks for the help...
pcburner said:
A friend of mine gave me a brand new Global 2 that was never activated. It has a Verizon Sim in it and my carrier is T-Mobile. I would like to know where you got the unlock code from. There's allot of sites our there claiming 100% guarantee but I don't know who to trust. Also how hard would this phone be to get on T-Mobile? Thanks for the help...
Click to expand...
Click to collapse
I got mine from this eBay seller (I hope it's ok to post eBay links). Just remember that the IMEI, which is what that seller needs to provide the code, is not the same as the MEID. To get the IMEI you have to go to Settings > About Phone > Status > IMEI. The IMEI should start with "35".
To get the phone working on T-Mobile, it's as easy as it is for AT&T. Assuming you have the latest .629 update, you have to use RSDLite to downgrade to .330 which will temporarily brick the device. Then use ezSBF to update back to .629. This will preserve the .330 baseband while unbricking your phone. Then all you have to do is root, install CWM using the D2 Bootstrapper, and flash the TBH band hack .zip from within CWM.
Good luck! and If you've got any questions, feel free to PM me.
start with a fully charged battery before starting the band unlock
links in my list
sd_shadow's list of links for Droid FAQs, SBF, Rooting, ROMs....
Sent from my XT862 using Tapatalk 2
---------- Post added at 09:19 PM ---------- Previous post was at 09:14 PM ----------
most d2 globals can be unlocked
for a few the d2g the codes don't work
you will not know if code will work till you try
if the code does not work ask for a 2nd or 3rd code
Sent from my XT862 using Tapatalk 2
I actually figured out how to fix it: I changed it to gsm mode only..
But now, after i messed with it a little, I can't search for gsm networks, only for umts.. And when i try change the mode to CMDA, it change it back to gsm/umts mode
Any suggestions?
HELP!!!
I stupidly deleted the build.prop, and now the phone won't boot!!!
What do i do now?!
in the usa? carrier?
have you done any of the build prop fixes?
Sent from my XT862 using xda premium
The original carrier is Verizon, but i unlocked it and my carrier is Cellcom(Israel).
I also tried to factory reset it, but it didn't work..
there are a couple of build prop edits you can try
http://www.droidforums.net/forum/motorola-droid-2-global/151722-hacking-tweaking-3g-settings-radio-driver.html
and
http://forum.xda-developers.com/showthread.php?t=1326323
But it does'nt help me now, because i don't have a build.prop now and i can't boot up my phone.
need to flash sbf
How to Use RSD Lite to flash a .sbf (Stock Rom)
---------- Post added at 02:15 PM ---------- Previous post was at 02:13 PM ----------
and it's easier to follow, if you don't use edit option to add to post, just use quick reply
When I connect my phone, it isn't detected by the computer.. What can i do?
if rsd lite/ pc can not see your device read Driver errors
---------- Post added at 11:32 PM ---------- Previous post was at 11:31 PM ----------
or just use ezSBF 2.3.4/ 4.5.629
sd_shadow said:
if rsd lite/ pc can not see your device read Driver errors
---------- Post added at 11:32 PM ---------- Previous post was at 11:31 PM ----------
or just use ezSBF 2.3.4/ 4.5.629
Click to expand...
Click to collapse
thank you! I flashed it and it's working now!
But back to my problem, it's still can't find gsm networks, only umts networks..
And when I'm connected to a umts network, i can't hear, and the one who i call to can't hear either...
There isn't even a ring tone..
could be one or more of several things
hardware failure
something in the phone may be broken
sim card may be bad, even if it works in another phone, motorolas seem to be very sensitive to sim card issues
software
may need to change the apn setings
may need to do the band unlock if you carrier uses the bands blocked by software
may need to do the build prop edits
sd_shadow said:
could be one or more of several things
hardware failure
something in the phone may be broken
sim card may be bad, even if it works in another phone, motorolas seem to be very sensitive to sim card issues
software
may need to change the apn setings
may need to do the band unlock if you carrier uses the bands blocked by software
may need to do the build prop edits
Click to expand...
Click to collapse
Tried, nothing works /:
Related
Hi, I'm trying to root the phone so that I can freeze the phone functionality as I'm giving this to my nephew. I'm trying to create something along the lines of a Galaxy Player.
Any help would be appreciated. Heres some technical info.
Its an ATT phone, running 2.3.6.
Is there a way to create a custom recovery?
Anyone know how to root AT&T Fusion 2 with Android OS 2.3.6?
If anyone could guide me how to root AT&T fusion 2 running on 2.3.6, I would greatly appreciate it.
same, i've tried every guide, with superoneclick and unlockroot, can't seem to go into "recovery mode" (vol+ and power?) after fastboot and flashing the recovery partition (with several different huawei recovery img from clockworkmod), and now the factory reset doesn't work (hangs at at&t logo after powering off for more than half an hour, does anyone else have the same problem?).
thanks a lot!
tom
provkitir said:
same, i've tried every guide, with superoneclick and unlockroot, can't seem to go into "recovery mode" (vol+ and power?) after fastboot and flashing the recovery partition (with several different huawei recovery img from clockworkmod), and now the factory reset doesn't work (hangs at at&t logo after powering off for more than half an hour, does anyone else have the same problem?).
thanks a lot!
tom
Click to expand...
Click to collapse
I will be sure to post any findings regarding the Fusion 2 / U8665 root - even though it is a "GoPhone" I am NOT paying for a smartphone plan (only the 10$ WAP internet). I simply purchased the sim card at the store and told them it was an old school LG flip phone from Cingular & I had unmetered 2G connectivity on my previous unlocked Tmo Galaxy (however, you MUST remove the AT&T software via TitaniumBackup or AT&T will AUTOMATICALLY add 30$ a month to your plan), Once the firmware/hboot/radio/recovery has been modified you can go into a store to pickup a SIM for non-smart phones and pay 10$ for unlimited rather than 40$ for 200mb of bandwidth (this is PATHETIC).
Oh and F*&K you AT&T for re-subsidy locking my phones and ****listing all my IMEIs across 3 carriers - the sim card and phone including battery data is my property and not the FCCs or yours... I can do with it whatever I want. If you want to continue with these destructive law-violating actions I will see you in small claims court.
I don't see Sprint blacklisting my ESNs for making the best use of my PAID FOR COPY of CDMAWorkshop and changing serial numbers, carrier locks, PRLs for 4G on Verizon, custom boostmob fws, etc... leave me alone. End of rant.
Use this guide!!
RFE said:
I will be sure to post any findings regarding the Fusion 2 / U8665 root - even though it is a "GoPhone" I am NOT paying for a smartphone plan (only the 10$ WAP internet). I simply purchased the sim card at the store and told them it was an old school LG flip phone from Cingular & I had unmetered 2G connectivity on my previous unlocked Tmo Galaxy (however, you MUST remove the AT&T software via TitaniumBackup or AT&T will AUTOMATICALLY add 30$ a month to your plan), Once the firmware/hboot/radio/recovery has been modified you can go into a store to pickup a SIM for non-smart phones and pay 10$ for unlimited rather than 40$ for 200mb of bandwidth (this is PATHETIC).
Oh and F*&K you AT&T for re-subsidy locking my phones and ****listing all my IMEIs across 3 carriers - the sim card and phone including battery data is my property and not the FCCs or yours... I can do with it whatever I want. If you want to continue with these destructive law-violating actions I will see you in small claims court.
I don't see Sprint blacklisting my ESNs for making the best use of my PAID FOR COPY of CDMAWorkshop and changing serial numbers, carrier locks, PRLs for 4G on Verizon, custom boostmob fws, etc... leave me alone. End of rant.
Click to expand...
Click to collapse
http://androidforums.com/fusion-2-a...-step-root-walkthrough-huawei-fusion-2-a.html
I wrote up this thorough N00B friendly guide for anyone with little to no experince with rooting phones! Give it a try it literally walks you throughout the entire process. Four or so folks have rooted through my guide using RFE and roboticbuddy's methods of rooting!!
Give it a try today!
---------- Post added at 09:46 AM ---------- Previous post was at 09:45 AM ----------
kosein said:
If anyone could guide me how to root AT&T fusion 2 running on 2.3.6, I would greatly appreciate it.
Click to expand...
Click to collapse
http://androidforums.com/fusion-2-a...-step-root-walkthrough-huawei-fusion-2-a.html
---------- Post added at 09:46 AM ---------- Previous post was at 09:46 AM ----------
provkitir said:
same, i've tried every guide, with superoneclick and unlockroot, can't seem to go into "recovery mode" (vol+ and power?) after fastboot and flashing the recovery partition (with several different huawei recovery img from clockworkmod), and now the factory reset doesn't work (hangs at at&t logo after powering off for more than half an hour, does anyone else have the same problem?).
thanks a lot!
tom
Click to expand...
Click to collapse
http://androidforums.com/fusion-2-a...-step-root-walkthrough-huawei-fusion-2-a.html
---------- Post added at 09:48 AM ---------- Previous post was at 09:46 AM ----------
iamtimmah said:
Hi, I'm trying to root the phone so that I can freeze the phone functionality as I'm giving this to my nephew. I'm trying to create something along the lines of a Galaxy Player.
Any help would be appreciated. Heres some technical info.
Its an ATT phone, running 2.3.6.
Click to expand...
Click to collapse
http://androidforums.com/fusion-2-a...-step-root-walkthrough-huawei-fusion-2-a.html
That guide is my N00B friendly walkthrough on how to root the huawei fusion 2!!
Anyone who is stil, looking for root use my guide based off of RFE and Roboticbuddy's root methods!!!!
Hi All,
I have a Moto G first gen, yday night got the update and its done, however post which the operator data is NOT working. Its just WiFi which is working.
What I have done:
Updated to Lollipop - Thru WiFi
Checked - Operator Data Not Working
Solutions which I did, which was recieved from Google Plus community & Moto Care Agent (Live Chat)
1. Cleared Cache
2. Did a soft reset & rebooted With Sim & Without Sim
3. Did a hard reset & rebooted with Sim & Without SIM
I have been trying all methods to get this going, but of no use. Kindly help! I wouldn't hesitate to go back to Kit Kat now!
Thank You
Nitin
Guys anyone here who could help? Appreciate
Are you checked your APN configuration?
downgrade to kitkat4.4 then update to lollipop might hlp.
sanads said:
downgrade to kitkat4.4 then update to lollipop might hlp.
Click to expand...
Click to collapse
I'm afraid I'm not too tech savy to do that kind of fiddling around in the phone, saw some comments & i also hear its risky to do that. Any link which is better detailed & easy to fix? I'm a layman who can do some basic stuff.
Checked the APN settings too
Not Working
Nitin77 said:
Hi All,
I have a Moto G first gen, yday night got the update and its done, however post which the operator data is NOT working. Its just WiFi which is working.
What I have done:
Updated to Lollipop - Thru WiFi
Checked - Operator Data Not Working
Solutions which I did, which was recieved from Google Plus community & Moto Care Agent (Live Chat)
1. Cleared Cache
2. Did a soft reset & rebooted With Sim & Without Sim
3. Did a hard reset & rebooted with Sim & Without SIM
I have been trying all methods to get this going, but of no use. Kindly help! I wouldn't hesitate to go back to Kit Kat now!
Thank You
Nitin
Click to expand...
Click to collapse
Tried all of the above steps, but still data connection can't be made. Exclamation (!) mark is always there over the network signal.
a8chis said:
Tried all of the above steps, but still data connection can't be made. Exclamation (!) mark is always there over the network signal.
Click to expand...
Click to collapse
Yeah same here.
An update:
Spoke to Moto care again as its been now three days since the update. They asked me to visit a local authorized service ctr, which I did. Being there one of the executives at the ctr told me that they would need the pone for about a week as they have to check the mother board! I was surprised as why that, when it was working very well till the update. So he said they would check & also check the s/w to see for issues.
I'm a little not happy about the whole thing & Im yet to give this phone there. So any thoughts? Or do you have any updates?
Nitin77 said:
Yeah same here.
An update:
Spoke to Moto care again as its been now three days since the update. They asked me to visit a local authorized service ctr, which I did. Being there one of the executives at the ctr told me that they would need the pone for about a week as they have to check the mother board! I was surprised as why that, when it was working very well till the update. So he said they would check & also check the s/w to see for issues.
I'm a little not happy about the whole thing & Im yet to give this phone there. So any thoughts? Or do you have any updates?
Click to expand...
Click to collapse
I don't think it's a good idea to give your phone to be fixed like THAT, I mean it must be a software bug and for that they don't need to check the motherboard(I suppose).
No solution for me also. Went to local moto care center. They told that it's a s/w bug and the best thing to do is to wait for lollipop 5.1 update which is slated to be released on feb 2015. I'm thinking to do just that because i don't see any other way to solve this.
I have a work around. Also had same issue.
I had my sim in slot 2 of Moto G, the mobile data was not working.
When I inserted the sim in slot 1, it worked.
Sajal22 said:
I had my sim in slot 2 of Moto G, the mobile data was not working.
When I inserted the sim in slot 1, it worked.
Click to expand...
Click to collapse
me too, i have two sims in the phone, with diferent apn each one, so the internet not works on sim 2, but works only if i delete the apn of sim1, try this
---------- Post added at 01:26 PM ---------- Previous post was at 01:25 PM ----------
im downgrade to kitkat and works both sims without problem, its not a problem with mother board, they are stupid. but try to delete the sim1 apn's and see if it works the second sim
---------- Post added at 01:30 PM ---------- Previous post was at 01:26 PM ----------
if you set the same apn for the both sim, will works only the sim with correct apn, if you change the apn on second sim, will works viceversa
woozie.2007 said:
me too, i have two sims in the phone, with diferent apn each one, so the internet not works on sim 2, but works only if i delete the apn of sim1, try this
---------- Post added at 01:26 PM ---------- Previous post was at 01:25 PM ----------
im downgrade to kitkat and works both sims without problem, its not a problem with mother board, they are stupid. but try to delete the sim1 apn's and see if it works the second sim
---------- Post added at 01:30 PM ---------- Previous post was at 01:26 PM ----------
if you set the same apn for the both sim, will works only the sim with correct apn, if you change the apn on second sim, will works viceversa
Click to expand...
Click to collapse
I have only only one sim car slot( sim 2) working. Sim card 1 slot is broken in my cell. So what to do with only one sim card's APN settings?
a8chis said:
I have only only one sim car slot( sim 2) working. Sim card 1 slot is broken in my cell. So what to do with only one sim card's APN settings?
Click to expand...
Click to collapse
try to delete or reset apn
No luck at all here, my issue is my SIM 1 slot is tampered & is not working. SIM 2 slot is not detecting mobile data
Im on the same boat here! & i dont see anything happening
I also had this problem. switched the simcard to the other slot, fixed, lets see how long it will last.
I'm not responsible if this damages your phone, attempt at your own risk.
Hi everyone, I have stumbled upon what appears to be a working unlock solution for the G flex 2 (LS996). This is essentially a similar method of unlocking the g3, but with my unlocked by sprint node.db files. Currently MMS and Calling are not working for me on ATT, but data (LTE) and texting works. I beleive I know why calling is not working, as well as MMS, but I am not sure how to fix it, I am new to unlocking using root. Anyways, on to the guide.
First you will need to root your G Flex 2
You will also need Root Browser
Now after you have rooted download the files attached to this post
Next transfer the files to your phone if you did not download on your flex2
*Back up your node.db and node.db-library by adding .bak to the end in /carrier/apps
Once the files you downloaded are on your phone extract them to /carrier/apps
Now restart your phone with your non sprint sim card, or sprint if you are unlocking for future use
When the phone boots you should see that it is recognized, but the carrier still identifies as sprint
Go into settings, more, set mode to global, then go to apn settings and add in your apn
Now you should have full sms and data
This is as far as I have got at the moment, but I am working on calling and mms on at&t, it did appear to be working on Verizon though
Now to where I need some help:
First is calling. I think I have identified the 2 things that may be causing the problems. First is call barring, when I opened up a hidden phone menu it said that incoming, outgoing, etc calls were locked. When I try to enter that submenu to unlock them it says something about the sim or crashes. Next is hd calling. When I dial a number there is a hd symbol next to dialing, I don't know what that is, but if it is sending the call over data I am assuming that there is some type of problem with it sending it to a sprint server or something. If someone can help me figure this out I will be very thankful.
My next problem is MMS, on at&T. Whenever I try to send or download one it does not work. I might just have messed up my apn a few times but I doubt it. The MMS settings in hidden menus show up with sprint settings, and I have tried changing them but they just revert. Could anyone help me out?
PS Sorry about adding two files the first one did not show up when I posted and now I don't know how to remove
I am getting hands free activation now and then please help.Tried everything below.
iginally Posted by tomtam
Try this..
with root explorer : Go to system/app or /system/priv-app folder.
Locate Sprintsyncml. Apk
Rename it to Sprintsyncml. Bak
or
Search for OmaDmclient.apk, then click and hold the file till it popups a secondary menu, in secondary menu select RENAME.
Rename OmaDmclient.apk to OmaDmclient.apk.bak and press ok.
or
LGstartupwizard.apk... Which is located at
/system/priv-app
try this options it should work..it will disable the prompt
Thanks only found LGstartupwizard.apk but it is still popping up after rename..Please help
jmar896 said:
I'm not responsible if this damages your phone, attempt at your own risk.
Hi everyone, I have stumbled upon what appears to be a working unlock solution for the G flex 2 (LS996). This is essentially a similar method of unlocking the g3, but with my unlocked by sprint node.db files. Currently MMS and Calling are not working for me on ATT, but data (LTE) and texting works. I beleive I know why calling is not working, as well as MMS, but I am not sure how to fix it, I am new to unlocking using root. Anyways, on to the guide.
First you will need to root your G Flex 2
You will also need Root Browser
Now after you have rooted download the files attached to this post
Next transfer the files to your phone if you did not download on your flex2
*Back up your node.db and node.db-library by adding .bak to the end in /carrier/apps
Once the files you downloaded are on your phone extract them to /carrier/apps
Now restart your phone with your non sprint sim card, or sprint if you are unlocking for future use
When the phone boots you should see that it is recognized, but the carrier still identifies as sprint
Go into settings, more, set mode to global, then go to apn settings and add in your apn
Now you should have full sms and data
This is as far as I have got at the moment, but I am working on calling and mms on at&t, it did appear to be working on Verizon though
Now to where I need some help:
First is calling. I think I have identified the 2 things that may be causing the problems. First is call barring, when I opened up a hidden phone menu it said that incoming, outgoing, etc calls were locked. When I try to enter that submenu to unlock them it says something about the sim or crashes. Next is hd calling. When I dial a number there is a hd symbol next to dialing, I don't know what that is, but if it is sending the call over data I am assuming that there is some type of problem with it sending it to a sprint server or something. If someone can help me figure this out I will be very thankful.
My next problem is MMS, on at&T. Whenever I try to send or download one it does not work. I might just have messed up my apn a few times but I doubt it. The MMS settings in hidden menus show up with sprint settings, and I have tried changing them but they just revert. Could anyone help me out?
PS Sorry about adding two files the first one did not show up when I posted and now I don't know how to remove
Click to expand...
Click to collapse
first thanks for your effort!! second have you made any progress on gettin at&t working specifically talk and txt?
has any kind of progess been made yet? i suppose with a locked bootloader were gonna hit dead ends
T-mobile US with LTE Data Working
sooo i after this unlock and 2 more from the lg g3. I tried this one again I had no signal now I set it to global mode i got signal bars and its say sprint at the lock screen but in settings it says t-mobile
Text Works
Data works
LTE Data Super Fast
But no phone calling cant dial out phone app will crash and all the signal will disappear
Try dialing with 1 then area code
this is for domestic right? but for international unlock only need to change the files and it will work?
carlosirai said:
this is for domestic right? but for international unlock only need to change the files and it will work?
Click to expand...
Click to collapse
Yes that's true. Take care about permissions setup, use root explorer for that purpose. In three countries I use this phone LTE works mostly in bands 4, I also enabled that band using a guide I found here.
AndroidKing said:
sooo i after this unlock and 2 more from the lg g3. I tried this one again I had no signal now I set it to global mode i got signal bars and its say sprint at the lock screen but in settings it says t-mobile
Text Works
Data works
LTE Data Super Fast
But no phone calling cant dial out phone app will crash and all the signal will disappear
Click to expand...
Click to collapse
try downloading a dialer app from play store and see if that works..please leave feedback
i can unlock but not free^
---------- Post added at 09:32 AM ---------- Previous post was at 09:32 AM ----------
i can unlock but not free^
Fix full hands free activation
How's that?
tungkick said:
i can unlock but not free^
---------- Post added at 09:32 AM ---------- Previous post was at 09:32 AM ----------
i can unlock but not free^
Fix full hands free activation
Click to expand...
Click to collapse
I had the phone unlocked by sprint and can still not hook on to AT&T. What are you offering?
5.1.1 can unlock gsm sim too? Thank You
Changed my build.prof and got calling working flawless, just cant seem to be able to change apn settings.
ro.carrier=spr
ro.build.target_operator=spr
With this, you can also changed the spr to tmo if you want.
Anyone know how to make it so I can change apns?
matistight said:
Changed my build.prof and got calling working flawless, just cant seem to be able to change apn settings.
ro.carrier=spr
ro.build.target_operator=spr
With this, you can also changed the spr to tmo if you want.
Anyone know how to make it so I can change apns?
Click to expand...
Click to collapse
so in build prof did you change ro.carrier to spr or ro.carrier=spr?
have you tried for apn ##data#(##3282#)
dcasun said:
so in build prof did you change ro.carrier to spr or ro.carrier=spr?
have you tried for apn ##data#(##3282#)
Click to expand...
Click to collapse
When in the build.prof editor in Root Toolkit Lite, I simply changed it from "SPR" to "spr".
##data# isn't helping because I dont have the msl/spl. Everytime I go to change the APNs it wont allow me add one in. I can edit files if needed, I just need to be able to edit it haha
matistight said:
When in the build.prof editor in Root Toolkit Lite, I simply changed it from "SPR" to "spr".
##data# isn't helping because I dont have the msl/spl. Everytime I go to change the APNs it wont allow me add one in. I can edit files if needed, I just need to be able to edit it haha
Click to expand...
Click to collapse
What system version were you on?
ian577416 said:
I had the phone unlocked by sprint and can still not hook on to AT&T. What are you offering?
Click to expand...
Click to collapse
How much is it and will it be also international unlocked?
google~android said:
first thanks for your effort!! Second have you made any progress on gettin at&t working specifically talk and txt?
Click to expand...
Click to collapse
where did you find apn settings?
I see. After I flashed to zv8 they apeard. Didn't have any on zv6
carlosirai said:
this is for domestic right? but for international unlock only need to change the files and it will work?
Click to expand...
Click to collapse
@carlosirai, others,
can you help me a bit, as your post intrigued me as follows :
i bought this phone - rooted and unlocked as per method above by ebay seller for international usage.
currently, the phone is technically domestic unlocked and rooted on ZV6. this results in no OTA and node files for SPRINT modified!
as an internationsl user, who will not be using US Domestic providers or Sprint, can i unroot on ZV6? then upgrade to ZV9 then root as/if required and use with an international provider? this usage will be on 3G & LTE ( Bands can be enabled as required, post root )?
thanks in advance!
any help you
abhishek.banerjee said:
@carlosirai, others,
can you help me a bit, as your post intrigued me as follows :
i bought this phone - rooted and unlocked as per method above by ebay seller for international usage.
currently, the phone is technically domestic unlocked and rooted on ZV6. this results in no OTA and node files for SPRINT modified!
as an internationsl user, who will not be using US Domestic providers or Sprint, can i unroot on ZV6? then upgrade to ZV9 then root as/if required and use with an international provider? this usage will be on 3G & LTE ( Bands can be enabled as required, post root )?
thanks in advance!
any help you
Click to expand...
Click to collapse
Yes to all you said.
You need to flash stock zv6 system image and ota update to zv9, then root with zv9 rooted system image and do the "fixes"...
hello everyone i hope this time you will answer me it is my third time to post this
i have n920p unlocked it worked perfectly on 5.1.1 after MM update in odin and all worked fine after 2 months i lost signal data
i reflashed with all version and all modems and nothing work my emei is not 0000000000 nothing changed i only lost signal
and get emergency calls only
please answer me with the few you know about the problem it could help me
thank you
wjouhzebi
##72786# in dialer or enter the correct apn for the service ur using and that a apn is selected in mobile data settings.
---------- Post added at 10:41 AM ---------- Previous post was at 10:40 AM ----------
If that dont work u can try ##rtn# but will need msl for that one
it dont work for me i made the apn and ##72786# and it gave me nothing please help
My iPhone only say emergency call only and I don't know why and don't know what to do.?
Can you give me more information? Is it on sprint network or is it sim unlocked? When did this start and did anything on phone get updated or changed around time this started?
obliviousmnd said:
Can you give me more information? Is it on sprint network or is it sim unlocked? When did this start and did anything on phone get updated or changed around time this started?
Click to expand...
Click to collapse
It a sim unlocked after updating it to mm I have that problem..thanks for reply
What carrier is it on now?
obliviousmnd said:
What carrier is it on now?
Click to expand...
Click to collapse
Is claro dominican republic is just like tmobile in U.S.
Hmm. I dont think MM would cause this. Does data work? Or is it both calls and data blocked
obliviousmnd said:
Hmm. I dont think MM would cause this. Does data work? Or is it both calls and data blocked
Click to expand...
Click to collapse
Notting work? the phone detect the sim but just only say emergency call only
In settings > mobile networks, what you have selected for network mode and is network operators able to be clicked?
---------- Post added at 01:38 AM ---------- Previous post was at 01:33 AM ----------
Also in settings > about device > imei information. In tbis screen is their a valid 20 digit number listed under ICCID?
obliviousmnd said:
In settings > mobile networks, what you have selected for network mode and is network operators able to be clicked?
---------- Post added at 01:38 AM ---------- Previous post was at 01:33 AM ----------
Also in settings > about device > imei information. In tbis screen is their a valid 20 digit number listed under ICCID?
Click to expand...
Click to collapse
I don't see any ICCID numbers there only imei and IMEISV
Is your sim in the phone properly?
obliviousmnd said:
Is your sim in the phone properly?
Click to expand...
Click to collapse
Yes
Can you try it in another phone to be sure? We can go from there. Only time ive seen emergencu calls is no sim or bad sim
obliviousmnd said:
Can you try it in another phone to be sure? We can go from there. Only time ive seen emergencu calls is no sim or bad sim
Click to expand...
Click to collapse
Í try and nothing...so tried several methods and nothing and I try to downgrade and Odin say fail just try diferen Rom from samfirmware this phone make me sick..thanks for your help!!
try to add your APN manually then restart your phone.
Ahmed.Salim said:
try to add your APN manually then restart your phone.
Click to expand...
Click to collapse
I did it too??