Related
I have tried 3 different versions of the Cyanogen mod on my Hero over the last few days and I can't get my data to stay on 3g. I'm staying in the same areas I've always used my phone and I never had problems before. Luckily I can stay on wireless most of the day, but 1x is driving me nuts.
Radio version is 2.42.01.04.27
Any suggestions? My last thoughts are to go back to stock and hope I get my 3g back...
zeropants said:
I have tried 3 different versions of the Cyanogen mod on my Hero over the last few days and I can't get my data to stay on 3g. I'm staying in the same areas I've always used my phone and I never had problems before. Luckily I can stay on wireless most of the day, but 1x is driving me nuts.
Radio version is 2.42.01.04.27
Any suggestions? My last thoughts are to go back to stock and hope I get my 3g back...
Click to expand...
Click to collapse
Maybe you need to update your PRL?
As far as I know, the only way to do that is to flash a Sense ROM, go in to the settings (Under phone info, I believe), and do a PRL update. Then you can flash back to CM6.1 and see if it worked?
You can also try flashing different radios to see which gives the best signal for your area, but that has a slight chance of bricking your phone, so... Be careful?
xDragod said:
Maybe you need to update your PRL?
As far as I know, the only way to do that is to flash a Sense ROM, go in to the settings (Under phone info, I believe), and do a PRL update. Then you can flash back to CM6.1 and see if it worked?
You can also try flashing different radios to see which gives the best signal for your area, but that has a slight chance of bricking your phone, so... Be careful?
Click to expand...
Click to collapse
PRL might be it. I doubt a different radio would help. I've not had any problems with the newest radio and I've been running on it for a while. I'm beginning to wonder if it's a problem with turning off wifi. If I restart the phone I can start and stay on 3g. But, if I change to wifi then switch back 3g doesn't return probably 90% of the time. Disabling and re-enabling data doesn't help either.
zeropants said:
PRL might be it. I doubt a different radio would help. I've not had any problems with the newest radio and I've been running on it for a while. I'm beginning to wonder if it's a problem with turning off wifi. If I restart the phone I can start and stay on 3g. But, if I change to wifi then switch back 3g doesn't return probably 90% of the time. Disabling and re-enabling data doesn't help either.
Click to expand...
Click to collapse
Have you tried switching airplane mode on/off?
davec1234 said:
Have you tried switching airplane mode on/off?
Click to expand...
Click to collapse
Isn't that basically disabling and re-enabling data?
Why not post in the correct. Section=Q&A.
Or in the cm6 thread?
Sent from my HERO200 using XDA App
I don't really look at the data notification in the status bar but there have been instances where I have noticed that reads 1x. Mine seems to switch and like the OP said I am in all the same areas prior to the 6.1 update. I am using the same radio and PRL list as prior to the 6.1 update. I also have my wife turned off and never really turn it on. So this leads me to think that 1 either in some cases there is a problem with the data maintaining its 3G connection or 3G was busted prior to 6.1 and is now reading accurately...though I do not think that is the case since my sister has the same phone and is running sense and she is not losing 3G
Just out of curiosity, could this explain my poor batter life, I am only getting maybe 5hrs and that is with little to no use.
I had the same problem going to the Nov2 build of the blackmod, 3G dead, nothing worked to fix it short of flashing over to a stock build and do the re-provisioning via the #*# code. After that I totally wiped the phone and installed the new CM6.1 build and all is well.
Nanan00 said:
I had the same problem going to the Nov2 build of the blackmod, 3G dead, nothing worked to fix it short of flashing over to a stock build and do the re-provisioning via the #*# code. After that I totally wiped the phone and installed the new CM6.1 build and all is well.
Click to expand...
Click to collapse
Yeah, I went back to stock and it was normal for me. The last rom I did was the blackmod so it might be something there.
Lol "wife turned off" haha
Sent from my HERO200 using XDA App
Cyanogen 6.1 no 3G, After Using Wireless
I also noticed no 3G on 6.1. If I used wireless (802.11 to router), the 3G connection would be dropped, as expected and desired. Upon turning off wireless, the 3G connection would not be reconnected. This was not a problem with ADW not updating. All network apps reported no connection. After a reboot, the 3G connection was restored, until wireless was enabled.
I'm unable to get a data connection with any 2.2 Rom no matter what I try. I have this problem not only with CM 6 and 6.1 but also with AOSP which till the problem started I'd been running everyday since I rooted my phone in September.
Been running Liquid for about four days and haven't had any problems.
Sent from my HERO200 using XDA App
And I thought I was going crazy! The last week I have been having TERRIBLE luck with my 3G connection with the latest builds, Tried the newest RC,,,,Themed froyos, AOSP, ETC, and kept having issues so finally said screw it and I'm back to 2.1 for a while, Atleast for a week or so till some more bugs are worked out! Anyone know any reason why this all of a sudden popped up after three months of builds???
Dono74 said:
And I thought I was going crazy! The last week I have been having TERRIBLE luck with my 3G connection with the latest builds, Tried the newest RC,,,,Themed froyos, AOSP, ETC, and kept having issues so finally said screw it and I'm back to 2.1 for a while, Atleast for a week or so till some more bugs are worked out! Anyone know any reason why this all of a sudden popped up after three months of builds???
Click to expand...
Click to collapse
It's google/sprint server issues
theimpaler747 said:
It's google/sprint server issues
Click to expand...
Click to collapse
Where can I find out more about this? That might explain the issues my wifes having with her Evo. Thanks bro!
CyanogenMod-6.0.0-Heroc Works
Just to be clear, it was the 6.1 RC1 that gave me the problem with returning to 3G after using wireless.
6.0.0-Heroc works fine.
I'm experiencing intermittent connectivity while tethering my thunderbolt through either wifi or a usb cable. I usually have to restart the app or the phone to get it back. Anyone else experiencing this?
i used to have this happen to me alll the time. now i rarely see it. was using bamf rom at the time and nothing but grief. now i'm on synergy rom and using wireless tether 2.07 and no problems. which rom/kernel/radio are you using?
sg1dan said:
i used to have this happen to me alll the time. now i rarely see it. was using bamf rom at the time and nothing but grief. now i'm on synergy rom and using wireless tether 2.07 and no problems. which rom/kernel/radio are you using?
Click to expand...
Click to collapse
funny you should mention that as i'm using bamf 3.0 haha. Guess I know what I need to do now.
btw, the latest wireless tether app, the 3.01 or something, doesn't work. try either the 207 or 205 version. whichever will give you better stability. the stock tethering app that comes with the rom and anyother rom, doesnt give me good results. i wasn't able to download even a 350mb rom without loosing the 4g, no its not a problem. i also noticed that the 4g disappears whenever i opened too many tabs at the same time on tethered computer. guess too many pages loading at the same time somehow overloads something. i have no explanation.
I use BAMF and have same problem and i noticed connectivety dropped when display went to sleep so when tethering i turn it to not cut off and i have no problems now
carycooke said:
I use BAMF and have same problem and i noticed connectivety dropped when display went to sleep so when tethering i turn it to not cut off and i have no problems now
Click to expand...
Click to collapse
this is a different problem. i think that he's talking about the 4g connection disappearing for a second, then reappearing, but being unable to tether anymore. happens at random. ur talking about he wifi sleep policy thing.
While using the phone in a spot with poor wifi reception, I've noticed the wifi icon completely goes away sometimes. It will then pop back on shortly thereafter. Is this normal behavior when it thinks the wifi signal is completely gone?
I just picked one up yesterday and have been having issues. In my bedroom it will read 2 bars, drop to one, then shut off. Comes back on within seconds. This phone seems to have WiFi issues for a lot of users.
Sent from my HTC One X using xda premium
In the same room as my gateway full signal it stays connected no issues.
Sent from my HTC One X using xda premium
Same problem here, but it also happens when it says i have full bars. I need to enable best wifi performance to fix it. My gsii never had this problem...
This is exactly how mine behaves too. I'm in the room with my router so I normally have full bars (and should) but every once in a while the signal goes away and comes right back 2 seconds later. I've tested it with 2 routers, a linksys running dd-wrt and a d-link one, both have the same results.
Sent from my HTC One X using xda premium
ditto here but it reconnects fast, it doesn't disrupt me...im sure it will be fixed eventually!!
00_MACKIE_00 said:
ditto here but it reconnects fast, it doesn't disrupt me...im sure it will be fixed eventually!!
Click to expand...
Click to collapse
International One X has issues too. The newest update 1.85 was supposed to fix some WiFi issues along with other bug fixes, and it doesn't seem to have helped us. Let's not assume they even know what the problem is at this point.
Sent from my HTC One X using xda premium
http://www.xda-developers.com/android/hardware-fault-found-in-the-htc-one-x-causes-bad-signal/
^For anyone with wifi issues.
TKTAB911 said:
http://www.xda-developers.com/android/hardware-fault-found-in-the-htc-one-x-causes-bad-signal/
^For anyone with wifi issues.
Click to expand...
Click to collapse
I don't think what I am experiencing is a hardware issue at all. Im not even moving the phone when this happens, and my phone passes the squeeze test. I'm confident this means it has to be software related.
Sent from my HTC One X using xda premium
This is kind of an old/dead thread by now, but I just wanted to share my experience with wifi on the One X.
I'm also having problems, but I'm currently running a nightly (though very stable) build of CM10 on my One X and still have wifi issues. This COULD be hardware related, in that it's just crappy hardware (though it could also be software related if CM10 is built using wifi "code" (not really sure what the correct term for the wifi stuff in the software is ) from the stock software)
I'm sitting at work right now, for example, and every once in a while the wifi will disconnect. When connected it shows 2-3 wifi bars, when it's NOT connected, my wifi network shows up as "not in range" .
same type of thing has happened at my house. I thought my phone was defective so I traded it in for a replacement at best buy. Same issue. Such a shame becuase I really like everything else about this phone and wifi was never an issue on my last HTC device.
kernel changes affect wifi. some of the cm10 builds have known wifi issues.
i would never think of returning a phone because of an experience with a custom rom, since the phone wasn't built to run that rom.
always revert to full stock and see if you still have the issue. also updated ota/ruu are made to fix issues also. at&t rom doesn't have many stock wifi issues, but you can always run into issues with wifi access point incompatibilities.
I have tried lots of ICS roms till now and with every rom Iam seeing same wifi issues.
Wifi keeps disconnecting every 15 20 mins.
Today I installed official ICS using ODIN and still same issue. I was thinking this wouldn't be present in final release.
Everything works perfect on GB. Very excited about ICS but can't use my phone with wifi issues
Did anyone notice this on their phone?
Sent from my SAMSUNG-SGH-I727
sghi777 said:
I have tried lots of ICS roms till now and with every rom Iam seeing same wifi issues.
Wifi keeps disconnecting every 15 20 mins.
Today I installed official ICS using ODIN and still same issue. I was thinking this wouldn't be present in final release.
Everything works perfect on GB. Very excited about ICS but can't use my phone with wifi issues
Did anyone notice this on their phone?
Sent from my SAMSUNG-SGH-I727
Click to expand...
Click to collapse
I haven't had this issue personally..
Have you tried more then one WIFI network? Just thinking maybe it's your access point/router that's having issues, try restarting it perhaps?
Edit: Could also try playing with the WIFI settings in the router, sometimes changing the channel works for especially angry devices.
Factory reset the router
Sent from my SGH-I727 using xda premium
As I said earlier, it has nothing to do with my Router as everything works perfectly if I am on GB. I have Kindle Fire(on CM9) and Galaxy Tab 2( CM9) also and no issues those devices.
I see the same issue at home as well as in office wifi.
As the wifi gets connected within seconds after getting disconnected so it doesn't effect Web browsing, but when playing online games it becomes a nightmare.
I just purchased a used HTC One X from the Rogers network and unlocked it. Before rooting it, on the Sense rom WiFi was working great. Very strong signal and it never dropped. Upon flashing CM10, it's not picking up my home network (which I know is working because I'm typing on it right now and the device was connecting to it earlier).
I downloaded WiFi analyzer and it's jumping between networks, some networks pop up and then disappear and then new ones pop up. WiFi is just acting very strange. I did all the appropriate wipes before flashing.
I found a lot of WiFi issues surrounding the international One X but I don't think this is a defect since it was working fine with Sense.
Does anyone else have any experience with this?
Thanks!
Just flashed back to a Sense rom, and low and behold my WiFi is working properly again.
I've had the same experience with CM10 (different nightlies) and AOKP, WiFi is just not reliable. I can connect just fine and the signal strength is the same as with Sense (including CleanROM) but at random times transfer speeds will go down or just drop completely, usually turning WiFi off and on fixes it but it happens again within a couple of hours.
I've tried a couple of tips from those threads like turning off the 5GHhz radio on my router but that doesn't seem to help
fabiancalvo said:
I've had the same experience with CM10 (different nightlies) and AOKP, WiFi is just not reliable. I can connect just fine and the signal strength is the same as with Sense (including CleanROM) but at random times transfer speeds will go down or just drop completely, usually turning WiFi off and on fixes it but it happens again within a couple of hours.
I've tried a couple of tips from those threads like turning off the 5GHhz radio on my router but that doesn't seem to help
Click to expand...
Click to collapse
I can't even detect my home network. There's a few of the neighbors networks that pop up on and off but it's not consistent.
I'm literally sitting on my workstation which is connected to my home network and I have full bars. On Sense, I also get full bars and WiFi works as expected.
TotalCrisis said:
I can't even detect my home network. There's a few of the neighbors networks that pop up on and off but it's not consistent.
I'm literally sitting on my workstation which is connected to my home network and I have full bars. On Sense, I also get full bars and WiFi works as expected.
Click to expand...
Click to collapse
I've had troubles as well with WIFI on my device running CM10. I've posted numerous time to the CM10 dev forum but nothing comes from it at all. I had very good wifi with the Oct nightlies but now my Wifi is chocked off and doesn't perform as expected. I've tried rebooting my modem, router, switch everything and still the same results. Is there anyway to bring some attention to this or figure out the problem?
Help others and myself figure this problem out, anyone?
beankid said:
I've had troubles as well with WIFI on my device running CM10. I've posted numerous time to the CM10 dev forum but nothing comes from it at all. I had very good wifi with the Oct nightlies but now my Wifi is chocked off and doesn't perform as expected. I've tried rebooting my modem, router, switch everything and still the same results. Is there anyway to bring some attention to this or figure out the problem?
Help others and myself figure this problem out, anyone?
Click to expand...
Click to collapse
Are you on the stock kernel for CM10? Try flashing another kernel. It could be a kernel issue that you're having. I had this problem When I flashed PACman, and all i did was just flash Rohan's Build 5 and now my WiFi is working just fine.
Myrder said:
Are you on the stock kernel for CM10? Try flashing another kernel. It could be a kernel issue that you're having. I had this problem When I flashed PACman, and all i did was just flash Rohan's Build 5 and now my WiFi is working just fine.
Click to expand...
Click to collapse
I'll download rohans kernel as I've been using the built-in Kernal with that comes with CM10.
**Edit: I've installed RoHan's kernel but still the results are the same. The wifi and network become grayed out from time to time and websites fail to load. I know my home connection isn't quite that fast but there is no reason that the connection all together would drop.
my wifi icon on cm10 just turns grey after a while and doesn't receive any data. So i have to toggle it off and then on again to get it to work again
Sent from my One X using Tapatalk 2
The CM10 stable rom is out for the LTE One X. I'm going to give it a go and see if any thing changes.
Check your region code under Wifi -> Menu -> Advanced Settings -> Region Code
Make sure it's under US (or wherever you are), reboot and see if that helps.
stnguyen09 said:
Check your region code under Wifi -> Menu -> Advanced Settings -> Region Code
Make sure it's under US (or wherever you are), reboot and see if that helps.
Click to expand...
Click to collapse
I'm located in Canada, and I've tried setting it to US and Canada. No dice.
I tried the a different kernel, CM10 nightly, CM10 stable, AOKP, and none of them are working.
I'm having a similar problem. My wifi won't turn on for some reason. It's related to the phone hardware, not my network. And I'm only seeing this problem when flashing the most recent nightly of CM10.
I'm not sure what else to try. Any ideas?
I've tried rohan's kernel as well as setting the region for the WiFi adapter but eventually it happens again. It's not as bad as some of the other posts I've seen, but it does kill data through WiFi at some point and transfer speeds drop.
Is there anyway to get further data on this? I know that my phone doesn't have the hardware "bug" first reported with a few of the devices. Any logs or error reports we can try and gather?
I managed to connect to my home wifi which I was previously unable to connect to, I had to change my router's wireless signal channel from 13 to 1. I am able to hold a signal fine, however I know many of my neighbors networks are not showing up like they should. Similarly, I am also unable to pick up my university network at school.
As I've said, Wifi works fine on Sense.
Is there any way I can help with error reporting in any way? I don't mind donating a bit of money to the CM team and help them get some logs.
It's nice to know I'm not the only one affected.
I would have to say this is completely a Kernel problem. I am having a similar issue in cm10 on N7000. But it's only happens to the some of the routers.
My house's router is a d-link product. And when you are connected you will having no issue, but once you restarted your phone you are getting trouble to reboot the router once to get your self connected again, in the phone, the wifi will stating "Connecting" like forever.
But I am not getting the same trouble when I am with my company's wifi and the Wifi of my friends lynsys. So its hard to tell the developer about this issue because it's not happens to all people. I hopes this info helps. Reboot the router usually works for me.
Sent from my GT-N7000 using Tapatalk 2
yiwsg said:
I would have to say this is completely a Kernel problem. I am having a similar issue in cm10 on N7000. But it's only happens to the some of the routers.
My house's router is a d-link product. And when you are connected you will having no issue, but once you restarted your phone you are getting trouble to reboot the router once to get your self connected again, in the phone, the wifi will stating "Connecting" like forever.
But I am not getting the same trouble when I am with my company's wifi and the Wifi of my friends lynsys. So its hard to tell the developer about this issue because it's not happens to all people. I hopes this info helps. Reboot the router usually works for me.
Sent from my GT-N7000 using Tapatalk 2
Click to expand...
Click to collapse
Unfortunately it's not always possible to reboot the router.
Like I said, I can confirm this issue and anything I can do to help I will try to provide.
These issues with CM10 and the new AOSP will almost make me *shutter's to think this thought* move back to sense.....I'm just not sure what to do. Should we link this to the dev thread?
Edit: I've captured a logcat from me turning on wifi, connecting to a website, and loading a second website to see the behavior. PM me if this would be of use.
This is the only reason I'm using a Sense-based ROM (CleanROM), nightly builds for CM10 run great and I have no other issues, but this one is kind of a deal-breaker for me.
beankid said:
These issues with CM10 and the new AOSP will almost make me *shutter's to think this thought* move back to sense.....I'm just not sure what to do. Should we link this to the dev thread?
Edit: I've captured a logcat from me turning on wifi, connecting to a website, and loading a second website to see the behavior. PM me if this would be of use.
Click to expand...
Click to collapse
Would it be possible for us to get in contact with a developer?
How would I go about getting a logcat of my own?
fabiancalvo said:
This is the only reason I'm using a Sense-based ROM (CleanROM), nightly builds for CM10 run great and I have no other issues, but this one is kind of a deal-breaker for me.
Click to expand...
Click to collapse
I feel you man. I'm sticking with AOSP because I managed to at least get my home network working but it's definitely annoying not being able to get onto my university network.