A couple of days ago I finally received my qi wireless charging receiver from a company in China (purchased through Amazon). I wrote a review about on Amazon, but since I can't post links yet (newbie, thought I've technically been registered on the boards for years -- lurker), so if you want to see that you'd have to go to Amazon and search for the title of the product or at least some of the keywords. The title listed is "Metrans Qi Wireless Charger Wireless Charging Receiver For Samsung Galaxy S4" -- the company name is Metrans.
Seems to work fine so far. The pad says 650mA. The instructions received were in Chinese only. But I just search for "qi wireless installation" and found a video how to do it. Ridiculously simple. It's possible there is a slight bulge to the back cover of the phone, but if so it is very slight and my eyes couldn't really detect one.
When I put the phone on my charging pad (Nokia DT-900 that I got free from AT&T when I bought the Nokia Lumia 920 -- 12V, 750mA), I got a message on the phone:
Wireless charging
You have placed the device within range. Now
charging wirelessly...
Ballpark, it has taken me about five minutes to add 1% to the battery level, that's with all radios on except NFC. So, YMMV. The phone does not get hot (well, no hotter than when plugged into a regular charger).
I do not use a case on my phone, so I don't know if it would work through a case or not.
If you have any questions, let me know and I'll try to answer them.
You must have gotten lucky cause its $18.83 now. Not worth it at almost 20 for just the receiver.
I ordered mine on May 23 and had no idea when the Samsung would be released. Besides, I didn't want a new thicker back cover.
I paid $15.99 plus $4.49 shipping. Shipping was 15 total days.
ordered mine on ebay a few weeks ago. im also getting 650 charge speed. and there IS a buldge
. do you have any solid cases, that you can test if they fit with your wireless pad on..
i have paid enough for some cases and i dont want to throw them away, i still have neo hybrid that i can use but i still want my other plastic cases too..
Related
After reading many forums here and other places, I came up with a Qi charging setup for the S3 that works great. First, I purchased this Qi enabled charger for the phone:
Go to fasttech.com and search for a Galaxy S3 Qi charger patch for $14.80
It comes from Hong Kong so delivery is about 7 working days. Fits in the phone with the original cover--cover snaps all the way around unlike other solutions I have read about.
Then, I purchased the Nokia charger from Verizon:
Go to verizonwireless.com and search for Nokia wireless charging plate DT-900.
It's 49.99 but I nailed it with a 25% business discount for $37.39.
Works with a slim cover attached on the S3 and charges great!
Total cost for both with shipping was $55.25--less the the $70-80 solutions I have seen and it works great!
Good luck to all.
Sorry it would be easier to post links but the forum doesn't allow it for me.
So, Phonearena has a few articles on how you can get wireless charging on the S4 now, but they involve a third-party wireless receiver (read: back cover) that looks like it adds a considerable amount of thickness to the phone -- far too much to fit into a case not designed for it. The receiver also won't be shipping for another 3-4 weeks. They've also released a charging pad (which doubles as a dock), but it looks goofy and just uses the Qi standard anyway, so there are plenty of options out there for that portion of the charging.
My question is: Are there other available receivers that actually work? eBay (and the like) displays a list of Galaxy S4 receivers (basically a little flat mat that sits on top of the battery and connects to the Qi hubs inside the back cover), but I'm extremely iffy on ordering any electronics from China unless they're proven...and all of the receivers listed are from mainland China. Has anyone given one of them a shot? And if so, are there any that work efficiently and don't cause problems?
I know, for the future, that Samsung has said they will have a wireless hub (mat) and receiver out sometime soon...but they said the same thing about the Galaxy S3, and it was never released. I trust the word of Samsung about as much as I trust the word of the IRS right now.
Anyone with experiences??
I feel the same way about china electronics, but I do have a Metrans brand one on the way I'm thinking sometime this week, I also go in on the indiegogo Monsterwatts receiver which probably wont show up till June.
so far all the info that I've read up in these forums about the receivers is that with just the Receiver the NFC does not work after installation, one guy used a note 2 NFC antenna to get it working. This sounds like too much fumbling to me and I prefer a sounder solution.
the official receiver covers are starting to show up in both white and black colors (black just recently) they cost 50 bucks and as you mentioned add considerable thickness. the cost doesn't bother me as much as the added thickness, which is what's holding me back from buying it.
The route I'm going to take for the time being is to try the receivers, if it works and does not add any bulge to the rear of the phone while disabling NFC, I could live with that.
maybe if they come out with a decent case for the official receiver cover I might get it.
I don't really use NFC anyway (who does), so that's an acceptable option for me. I have two people at work that I actually *would* use NFC stuff with, and we can just send files to each other without it anyway. Since Verizon has been so gracious as to make sure none of the devices on its network (outside of Nexus devices) can use Google Wallet, I really have no other reason to use NFC.
http://forum.xda-developers.com/showthread.php?t=2296301
Need to read thru his post. Yes, while the receiver is from china, the NFC is functional.
I ordered one from the UK and got it shipped to the US. Am I worried its from china? Not really its 20-30 bucks. It would be the last time I lose that amount.
I will agree that eBay has a lot of knock offs but its the chance you take.
I would like to see a Samsung product out as well, but this will have to do until they put something out.
The main reason Im trying it is because Im tired of looking for a desktop charger that I can use the S4 with while its in a case.
Good luck to ya!
that dude's thread confuses me, he shows some youtube video about a Sview case and how it doesn't close flush with the receiver and says you need to press it hard be careful not to crack your screen... after that he lost me.
I just want a thin receiver that I can slip in the rear without the bulge and closing issues, even if NFC is a NO-GO that's fine with me haha.
I purchased this http://www.ebay.com/itm/121111622748?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649
The item does work fine, does NFC work I don't know as I never use it but I will try and find out in the near future.
Item was received quickly and "worked" out of the box but the phone would slide off of the touchstone fairly quick, I had modded multiple phones to work with touchstones including my galaxy nexus so I gad these laying around http://www.kjmagnetics.com/proddetail.asp?prod=D401-N52&cat=168
some N52 magnets, and after checking polarities and moving everything around it now works great and holds the phone very securely.
Charge rate looks to be about 800mA peaking at 615mA incoming charge while the phone is on, Average draw while off the charger is about 200mA with same apps running so about 800mA I do not know what it should be giving out but this is more than enough to charge.
Thought people would like to hear about this and am willing to help if necessary.
nice but I am already invested in QI charging pads.
I think that's the trend anyway, I'm surprised there are still an ample supply of touchstone chargers and palm pre back plates still in the market.
galaxy808 said:
nice but I am already invested in QI charging pads.
I think that's the trend anyway, I'm surprised there are still an ample supply of touchstone chargers and palm pre back plates still in the market.
Click to expand...
Click to collapse
They are being supplied by third parties lately. I try and get the originals only though..
I also had a Qi Nexus 4 but I missed the magnetic pull of the pre I had and the galaxy nexus I modded so I did this.
And I can get a proclip for my car and these make amazing car chargers, which is the main reason I purchased the touchstone version.
SoM3_Idi0t said:
http://forum.xda-developers.com/showthread.php?t=2296301
Click to expand...
Click to collapse
That link + this link
http://forum.xda-developers.com/showthread.php?t=2256339
= no need to create a new thread asking the same question!
KryptosXLayer2 said:
That link + this link
http://forum.xda-developers.com/showthread.php?t=2256339
= no need to create a new thread asking the same question!
Click to expand...
Click to collapse
I wouldn't have created a thread if either of those had helped :good:
The first thread is fairly useful...but is very hard to understand. Also, that solution is pretty much only available overseas for some time. My thread is about using this functionality in North America...which is a totally different story. It's possible to order his solution, but it would cost in the neighborhood of like $75 for the receiver alone...much more than any other available solution.
This thread about looking at options and figuring out what they are.
hotleadsingerguy said:
I wouldn't have created a thread if either of those had helped :good:
The first thread is fairly useful...but is very hard to understand. Also, that solution is pretty much only available overseas for some time. My thread is about using this functionality in North America...which is a totally different story. It's possible to order his solution, but it would cost in the neighborhood of like $75 for the receiver alone...much more than any other available solution.
This thread about looking at options and figuring out what they are.
Click to expand...
Click to collapse
I got the cheapest possible solution I could find on eBay and/or other Chinese sites like AliExpress.
The charger, including a 5V 1.5A wall charger cost me just under $30 ad I got the the Qi receiver for $23. Both prices including S&H from China. It took less than two weeks before I received those items. The reason why I choose this solution was because I wanted to keep the S4 as slim as possible, and also be able to use the flip cover. To get it cheap is also a bonus.
The charge rate is at 640ma, and the bulge the Qi receiver is making is not visible. I removed the thin plastic film from the backside of the receiver and shaved off as much plastic from the inside of the plastic cover as I dared. There was a small visible bulge before those small modification. After the modification one can still "sense" the Qi receiver, but it is not visible or make the phone wobbly when lying on its back.
The only downside beside the rather low charging rate from this kit is the poor quality of the wall charger. It gets very hot and the solution should have been replaced with a micro USB port on the charging pad to make it more versatile when it comes to replacing wall chargers. The pad is also made too glossy and has an annoying sound when the charging initiate and a continuos overly bright status light. I removed the internal speaker and also dimmed the light with some standard paper. The kit can be modified with other housing solutions, and I was thinking of maybe install it inside a small paper-book or something that is a more "standard" item on a nightstand I will just have to check how hot the charging plate and/or the S4 gets before I try out any mods like that.
My recommendation is; Get an iQ charging receiver on eBay. The one I got is OK, but I might have chosen the oddly shaped Qi receiver after the reviews I have read. There is also rumours about a v2 of this slimmest receiver available. Probably wise to sit on the fence a bit longer. I would also advise to stay clear of those cheapest T-100 kind of charging pads that you can find everywhere for $25-$40. I would rather get the Nokia DT-910 or the genuine Samsung charging pad (are there two different kinds of those; one with a micro USB input and another with a standard charging plug?) In Norway both those chargers costs around 40-45 British pounds
Here is a few pics of my kit:
The other threads do not claim that they are UK/EU based.
Lots of usefull information in both. Bubbles post was to verify that the NFC works with the receiver he got.
You should probably do some research on your own.
and BTW, the cost to have just the reciever is £16.99. which is 25$ US.
http://lmgtfy.com/?q=£16.99+to+US+Dollar
Your post is a dupe. Sorry. It just is.
All, I'm taking a gamble here, as this forum seems pretty bare nowadays. My wife and I bought new Windows Phones to replace her Lumia 520 (which replaced her Galaxy Express) and my Galaxy Note i717. She has a 1020 and I have a 1520. Her 520 had wireless charging due to my buying a Qi sticker for it that plugged into the physical USB port. The problem with the sticker is the slowness of charging. I am looking for a Nokia wireless charging cover for her 1020, and can not find them ANYWHERE, except for a few listings on Ebay for $500 USD or so. (Amazon also lists one for $129.99?!) Where can I buy my wife a wireless charging cover? She can obviously use her wireless charging pad, and my old wireless charging pad, as my 1520 uses PMA charging (thanks AT&T... ), so as it stands I have two charging pads that do a good job just lying about the house. Any clues where to look?
I'm in a similar situation. I'm looking to get my brother a wireless charging cover for Christmas as he's having issues with his USB connection. Can't seem to find the damn things anywhere. I did find a listing at "Overseas electronics" (welectronics [dot] com.) via a Google shopping search. They accept Paypal so I tried placing an order but it was refunded with the reason being they are on backorder.
I've considered pulling the coil/connector out of a 925 charging cover but it looks like those have 3 pins vs the 1020 which has 2. I'm assuming I can't just leave one of the pins off. I have no problem tearing the coil out of the case but it's the connector that looks like it's going to be an issue.
Unfortunately, it looks like the only hope is to try and find a used one somewhere...
I have a used wireless cover in black that's gathering dust as i have sold my 1020.
I even got 2 camera grips in black and 1 wireless charging plate spare.
I am in the UK.
U wont be able to buy it any where as nokia stop manufacturing them prices of them become crazy , best bet is to make your own as look here
http://forum.xda-developers.com/lum...ireless-charging-cover-inside-photos-t3044448
Maybe a microsoft sotre site , have a wireless cover .
Hey all,
Starting a new thread on this, since the other one is several months old.
Does anyone know of where the S5 Wireless cover can be found where it isn't over priced (i.e. $100)? I'm looking to get the feature, as my charge port is acting funny w/ a lose connection to charging cables.
If not the OEM Samsung version, does anyone know of a decent After Market version that still keeps the waterproof capability. I've seen one on Amazon that doesn't have the waterproof gasket, but no luck anywhere else.
TIA.
FlynHokie said:
Hey all,
Starting a new thread on this, since the other one is several months old.
Does anyone know of where the S5 Wireless cover can be found where it isn't over priced (i.e. $100)? I'm looking to get the feature, as my charge port is acting funny w/ a lose connection to charging cables.
If not the OEM Samsung version, does anyone know of a decent After Market version that still keeps the waterproof capability. I've seen one on Amazon that doesn't have the waterproof gasket, but no luck anywhere else.
TIA.
Click to expand...
Click to collapse
How about:
http://www.newegg.com/Product/Product.aspx?Item=9SIA7142E95226
And, by the way, the S5 is NOT waterproof, it is water resistant, big difference...
I don't think that one is for the S5. The contacts for the battery don't match the battery pattern. Thanks for looking though.
Understood not waterproof. Just a lack of brain power to write resistant last night..
ME TOO!!!
I've been searching myself for years now, can't figure out why the hell they still cost so much, I'm still not sure I wanna pay $30 + shipping for one directly from Samsung/usa (but they aren't cheaper anywhere else!)
But anyhow... I haven't tried this myself but you could have a look getting at a Qi standard wireless receiver. I don't go on Amazon much, but there's a lot of them on Ebay.
Installed the following last week on my S5, couldn't be happier.
BestFire® Ultra-thin QI Wireless Charging Charger Receiver For Samsung (S5)
https://www.amazon.com/gp/product/B00JQ7UCJW/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
* NOTE... Images aren't for the S5. Unit shipped actually has 3 contact pins, which we need.
Fits well and seals with stock battery door. Slight center bump, but hardly noticeable especially with a protective case on. Using mine with a Samsung wireless charger.
S5
How is the performance of the wireless charging battery cover? Did it work?
Hey all, recent got one of these phones and was just thinking I should grab one of those wireless charging style backs. But now that I'm looking they appear discontinued? No one shows stock, and everyone on eBay wants 60 plus shipping for them. So any one have a better suggestion on getting wireless charging on this thing?
If you're in the UK, Vodafone has them in stock for £40. I got one and really like it, it's the grey fabric and looks great!
If you're stateside, you might have some luck at some Best Buy brick and mortar stores. Despite what the website says, some stores DO have it, albeit in very limited quantities due to lack of real demand, not to mention they were giving it as a freebie for those who bought the Moto Z, Moto Z Force, and Moto Z Play from them unlocked (which was how I even got one in the first place). eBay obviously has it but prices are going to be sky high. Heh, reminds me of when I had an LG V10 and the wireless charging back LG sold for it wasn't available in the US and would usually be sold at the low low price of $59.99 but I managed to nab one from a seller for $35 bucks.
Other than that, you're pretty much out of luck. If you really want wireless charging, get that Incipio battery mod that includes wireless charging or the TUMI one if you prefer. Probably better than the wireless charging back since it works with the Verizon bumper case though it probably doesn't have the 15W Qi fast charging capabilities that the style shell wireless charging back does.
wireless mod from motorola
I could not find the wireless mod either, until i did a web search and found a link to the motorola site. Sure enough i placed an order for $37 and it went through, even though it would not show as an available item on the site when I was looking on it. Just got confirmation email - be here in 5 days. Try this:
https://www.motorola.com/us/products/moto-mods/moto-style-shell-with-wireless-charging
The floral wireless charging mod is now available on the US Motorola site for a clearance price of $20. Get them while you can.