guys i need help, i have stock jelly bean 4.1.1 on my nexus s, and i wanted to have that black bean or inverted messaging, contacts and calendar for my phone, i tried using someone's help and i ended up restoring my phone twice, once i replaced the original one and then used twrp to flash it, but everytime it said messaging has stopped unfortunately need help regarding this please, if someone can help me get a few pointers how to replace my apps with inverted ones, hurts my eyes too since i have weak eyes
PS yes i'm rooted
Why don't you just flash blackbean or some other 4.2.2 rom that supports dark-toggled gapps and system apps? What's hindering you?
ej8989 said:
Why don't you just flash blackbean or some other 4.2.2 rom that supports dark-toggled gapps and system apps? What's hindering you?
Click to expand...
Click to collapse
well because they're not probably as stable as the stock rom? is what i've read probably ... if it is then i'll give it a go, and i have twrp by the way, it's the easiest to work with in my opinion, can it be done using twrp? i've had bad experience with cwm
Related
Hey guys,
I used to run cm10 nightlies on my tf300 but have lately been running Jellybean Hydro. I have been dissatisfied with the performance of my tablet and want to try cm10 again now that it is in stable release. Back when I was installing Hydro I read that once I install the Jellybean stock firmware for Hydro I am stuck running roms with stock firmware or at least it will be hard to run non stock roms...?
Is it possible for me to go from my current state to cm10? Are there any extra steps I need if it's possible?
Thank you in advance for any information!
cm10 JB compatible
Blackdrag said:
Hey guys,
I used to run cm10 nightlies on my tf300 but have lately been running Jellybean Hydro. I have been dissatisfied with the performance of my tablet and want to try cm10 again now that it is in stable release. Back when I was installing Hydro I read that once I install the Jellybean stock firmware for Hydro I am stuck running roms with stock firmware or at least it will be hard to run non stock roms...?
Is it possible for me to go from my current state to cm10? Are there any extra steps I need if it's possible?
Thank you in advance for any information!
Click to expand...
Click to collapse
Back up apps with titanium backup, nand backup, full wipe recommended. Flash CM 10 Flash Gapps, reboot, restore titanium profit.
Data wipe is almost no brainer if you ask me if you're moving to different ROM
You can use titanium backup to backup your apps and data but please don't restore system apps because those can cause problems
Sent from my Galaxy Nexus using xda app-developers app
Blackdrag said:
Hey guys,
I used to run cm10 nightlies on my tf300 but have lately been running Jellybean Hydro. I have been dissatisfied with the performance of my tablet and want to try cm10 again now that it is in stable release. Back when I was installing Hydro I read that once I install the Jellybean stock firmware for Hydro I am stuck running roms with stock firmware or at least it will be hard to run non stock roms...?
Is it possible for me to go from my current state to cm10? Are there any extra steps I need if it's possible?
Thank you in advance for any information!
Click to expand...
Click to collapse
The info provided above is good!
The info about jb stock roms relates to the bootloader. The roms we use here are either for jb or ics bootloader and in general if you maintain the correct bootloader you are good. That said, always read the op about how to install for your own safety and piece of mind unless told otherwise.
Hi,
I recently installed CyanogenMod 10 on my HTC Sensation.
Since then, I can't install several useful apps for me from the Google PlayStore, and I get a message "this version is incompatible with your device" (I had the same apps on my phone when I was on a stock Android ICS).
I tried to modify the build.prop file of my phone to make it look like a Samsung nexus S, following a tutorial I found. Then I wiped the playstore cache, rebooted, but no change.
What can I do ?
Thank you for your help !
Maxioum said:
Hi,
I recently installed CyanogenMod 10 on my HTC Sensation.
Since then, I can't install several useful apps for me from the Google PlayStore, and I get a message "this version is incompatible with your device" (I had the same apps on my phone when I was on a stock Android ICS).
I tried to modify the build.prop file of my phone to make it look like a Samsung nexus S, following a tutorial I found. Then I wiped the playstore cache, rebooted, but no change.
What can I do ?
Thank you for your help !
Click to expand...
Click to collapse
What apps are you looking at? That gives us a start to figure out what the problem is.
Also, what version of CM10 did you install? Bruce's Kang? The Official Nightly? Bruce's kang of CM10.1?
Did you change the DPI? That often causes the play store error you are talking about.
If all else fails do a full wipe and start over. Something might just be screwy in your install. But this is not a super common problem on CM10. So we can probably isolate what you are doign differently and fix it.
I mostly want to download French apps i used to have on my HTC before i installed CM10 (Société Générale, Qype, Allociné...)
I have Bruce's CM10 version "10-20130103-bruce2728-pyramid"... I don't know if it's the reference you were looking for. I downloaded it on this page : http://forum.xda-developers.com/showthread.php?t=1782009
I haven't change any DPI and never heard of something like this. Can you tell me more, if it has a chance to solve the problem ?
It could just be that those apps aren't ready for JB yet... Search for those apps + Jelly Bean in Google and see if there are any results saying anything about whether it's compatible or not, if they're working on updating them so they are, etc...
All the apps i'm refering to were working on my phone when i had a stock Android Jelly Bean.
Only since i installed CM10 they are shown as incompatible...
Maxioum said:
All the apps i'm refering to were working on my phone when i had a stock Android Jelly Bean.
Only since i installed CM10 they are shown as incompatible...
Click to expand...
Click to collapse
There is no stock jelly bean for the Sensation. Ice cream sandwich is as far as stock development went.
So you weren't running stock jb.
Changing DPI would have only broken compatibility. If you don't know what it is then you didn't mess with it.
I assume you set up cm10 to run in French. If not maybe that's it?
Sent from my Sensation using xda app-developers app
You're right. I was running a stock Android 4 ICS. My mistake ! And the apps were working with this version.
But a friend has a galaxy s3 with jb, and the apps work on his phone. So they are actually compatible with jelly bean.
I have CM10 in French.
Maxioum said:
You're right. I was running a stock Android 4 ICS. My mistake ! And the apps were working with this version.
But a friend has a galaxy s3 with jb, and the apps work on his phone. So they are actually compatible with jelly bean.
I have CM10 in French.
Click to expand...
Click to collapse
Maybe someone else running Bruce's ROM can try searching these apps in playstore and see if they have a similar problem.
Running a DK version of 4.2.1 they show and would install from the playstore for me...
Have you reflashed the phone and tried this? I'm not sure what Bruce's ROM tags the phone as by default but it would appear either through a change made or the ROM it's not flagging as a compatible device.
I would have suspected DPI (image size) change but we seem to have cleared that as an issue already.
Maxioum said:
All the apps i'm refering to were working on my phone when i had a stock Android Jelly Bean.
Only since i installed CM10 they are shown as incompatible...
Click to expand...
Click to collapse
I tested the ones you mentioned on CM 10 official nightly and they install as they should.
HTC Sensation XE
Does anything else install from the play store or is it only the French stuff?
Maybe you had something go screwy during install of either the ROM or the gapps?
Sent from my GT-P5110 using xda app-developers app
Hi All
I am new to custom roms,so have very little idea about it. I am currently using official JB leakhttp://forum.xda-developers.com/showthread.php?t=2092107) on my Indian Atrix 2( Originally MB865 after the JB Update ME865) I want to update to 4.2, so can anyone please provide me a step by step guideline on how to do it. I want a stable 4.2 with most of the features. Any help is highly appreciated.:fingers-crossed::fingers-crossed::fingers-crossed:
Thanks in advance
I suggest you try a kexec ROM and find out if you can boot it up.
If you get black screen, you gotta go to non kexec ones which have ui tear bug.
So first of all, install bmm from playstore.
Do the edits mentioned in this thread. http://forum.xda-developers.com/showthread.php?t=2115715
MAKE A BACKUP if you want.
Then flash a kexec ROM ( like liquidsmooth, avatar, Aokp etc)
If it doesn't boot up and you get black screen then FORGET about kexec ROMs.
Fxz to stock ics ( just like you flashed jb leak via RSD , but its going to be ics fxz file)
Download non kexec one like PA, PAC or cm10.1 without kexec. Bmm again, edits, flash. Enjoy!
If you don't understand anything, ask before you do it.
You mess up stuff, it's on you.
Lifehacker7 said:
I suggest you try a kexec ROM and find out if you can boot it up.
If you get black screen, you gotta go to non kexec ones which have ui tear bug.
So first of all, install bmm from playstore.
Do the edits mentioned in this thread. http://forum.xda-developers.com/showthread.php?t=2115715
MAKE A BACKUP if you want.
Then flash a kexec ROM ( like liquidsmooth, avatar, Aokp etc)
If it doesn't boot up and you get black screen then FORGET about kexec ROMs.
Fxz to stock ics ( just like you flashed jb leak via RSD , but its going to be ics fxz file)
Download non kexec one like PA, PAC or cm10.1 without kexec. Bmm again, edits, flash. Enjoy!
If you don't understand anything, ask before you do it.
You mess up stuff, it's on you.
Click to expand...
Click to collapse
Thanx a lot :good::good::good::good:. i will try it this way,could you please help me by providing a link with details about Fxz to stock ics.I was wondering would it be better if i first flash back to ICS then try any one of this ROM? Another thing the link says that we should not use BMm if we have used A2 bootstrapper, i already have a2 bootstrapper & hav used it before so what should i do ?
Screen not turning on for Paranoid Android 3.15
biswabasu said:
Thanx a lot :good::good::good::good:. i will try it this way,could you please help me by providing a link with details about Fxz to stock ics.I was wondering would it be better if i first flash back to ICS then try any one of this ROM? Another thing the link says that we should not use BMm if we have used A2 bootstrapper, i already have a2 bootstrapper & hav used it before so what should i do ?
Click to expand...
Click to collapse
Finally got paranoiD Android 3.15 running in my phone. Most of the things seems fine, only having a issue which is whenever i keep the lock screen as slide or anything, the screen does not turn on once locked, so always have to keep the screen lock as none.. I am not able to post in the dev forum so if anyone has a solution to it, it will be highly appreciated if the can share it with me.. Thanks
Hello!
I have a Samsung Galaxy S Advance i9070.
I just customized it from 2.3.6 stock, to Light JellyBean v1.2. I use CoCore-E-8.6.4 as custom kernel.
I don't know what to do, the phone is very slow. Sometimes it freezes for a very long time, it freezes in the menus, it freezes on google play, etc. Sometimes it's for a short period of time, but sometimes it crashes the whole ROM and the phone reboots... :crying::crying:
What should I do? On 2.3.6 the phone worked like a charm...
Please teach me how to make it better (4.1.2 of course). Tell me what is the best ROM, best KERNEL, best everything for S Advance i9070?
Thank you in Advance!
i found this
Gordon2013 said:
Hello!
I have a Samsung Galaxy S Advance i9070.
I just customized it from 2.3.6 stock, to Light JellyBean v1.2. I use CoCore-E-8.6.4 as custom kernel.
I don't know what to do, the phone is very slow. Sometimes it freezes for a very long time, it freezes in the menus, it freezes on google play, etc. Sometimes it's for a short period of time, but sometimes it crashes the whole ROM and the phone reboots... :crying::crying:
What should I do? On 2.3.6 the phone worked like a charm...
Please teach me how to make it better (4.1.2 of course). Tell me what is the best ROM, best KERNEL, best everything for S Advance i9070?
Thank you in Advance!
Click to expand...
Click to collapse
i found this thread http://forum.xda-developers.com/showthread.php?t=2151927
Try this
Gordon2013 said:
Hello!
I have a Samsung Galaxy S Advance i9070.
I just customized it from 2.3.6 stock, to Light JellyBean v1.2. I use CoCore-E-8.6.4 as custom kernel.
I don't know what to do, the phone is very slow. Sometimes it freezes for a very long time, it freezes in the menus, it freezes on google play, etc. Sometimes it's for a short period of time, but sometimes it crashes the whole ROM and the phone reboots... :crying::crying:
What should I do? On 2.3.6 the phone worked like a charm...
Please teach me how to make it better (4.1.2 of course). Tell me what is the best ROM, best KERNEL, best everything for S Advance i9070?
Thank you in Advance!
Click to expand...
Click to collapse
if you dont want lose the touchwiz then try this :
http://forum.xda-developers.com/showthread.php?t=2342314
hiko lara said:
i found this thread http://forum.xda-developers.com/showthread.php?t=2151927
Click to expand...
Click to collapse
I already know how to upgrade/downgrade my firmware. What I want to know is, what are the best custom rom and kernel for this device, that can make it fly. As it is now, it's the ****iest phone ever.
for me the best jelly bean rom is...
for me the best jelly bean rom is pac man ROM, before that i upgrade my device i used that ROM but i don't have a galaxy s advance well This is the thread http://forum.xda-developers.com/showthread.php?t=2278169
Gordon2013 said:
Hello!
I have a Samsung Galaxy S Advance i9070.
I just customized it from 2.3.6 stock, to Light JellyBean v1.2. I use CoCore-E-8.6.4 as custom kernel.
I don't know what to do, the phone is very slow. Sometimes it freezes for a very long time, it freezes in the menus, it freezes on google play, etc. Sometimes it's for a short period of time, but sometimes it crashes the whole ROM and the phone reboots... :crying::crying:
What should I do? On 2.3.6 the phone worked like a charm...
Please teach me how to make it better (4.1.2 of course). Tell me what is the best ROM, best KERNEL, best everything for S Advance i9070?
Thank you in Advance!
Click to expand...
Click to collapse
I also have Galaxy S advance I have used all custom roms. Always touchwiz roms lag
Our device has got stable cm10.1, cm10.2, cm11(wifi toggle buggy), omni rom, slimkat, carbon and many Rome see the s advance original development thread for more details
I suggest you to use cm10.1 or cm10.2. They are best and doesn't have single lag
Sent from my GT-I9070 using Tapatalk
PradeepMurugan said:
I also have Galaxy S advance I have used all custom roms. Always touchwiz roms lag
Our device has got stable cm10.1, cm10.2, cm11(wifi toggle buggy), omni rom, slimkat, carbon and many Rome see the s advance original development thread for more details
I suggest you to use cm10.1 or cm10.2. They are best and doesn't have single lag
Sent from my GT-I9070 using Tapatalk
Click to expand...
Click to collapse
Hi.
So CM is the best ROM so far. But what about the kernel?
Gordon2013 said:
Hi.
So CM is the best ROM so far. But what about the kernel?
Click to expand...
Click to collapse
There is cocore kernel but it is only for stock/stock based roms
cm has its own kernel
PradeepMurugan said:
There is cocore kernel but it is only for stock/stock based roms
cm has its own kernel
Click to expand...
Click to collapse
Ok I understand. So CM v10.1 and v10.2 are better than v11?
I want to ask, if I install an AOSP based ROM, can I install afterwards some of the Samsung's "touchwiz" apps that really matter?
UP
UP
Gordon2013 said:
I want to ask, if I install an AOSP based ROM, can I install afterwards some of the Samsung's "touchwiz" apps that really matter?
Click to expand...
Click to collapse
No you cannot install unless the app is ported
Sent from my GT-I9070 using Tapatalk
Just maybe
PradeepMurugan said:
No you cannot install unless the app is ported
Sent from my GT-I9070 using Tapatalk
Click to expand...
Click to collapse
Thanks for the answer. If I could have done it, it would have been great. It might still work, if I find the apps in .apk, it might just work, like an ordinary app. Does S-Voice belong to Samsung or Google? That's the only app that I want, I think. And I have it in .apk. I also have AccuWheather and Samsung Apps in .apk. I would lose Kies(I think), but the software is crap, backup and restore works only 70%. But there are more softwares out there that can do what Kies does, only better. So, I don't know, it's something to think about...
Gordon2013 said:
Thanks for the answer. If I could have done it, it would have been great. It might still work, if I find the apps in .apk, it might just work, like an ordinary app. Does S-Voice belong to Samsung or Google? That's the only app that I want, I think. And I have it in .apk. I also have AccuWheather and Samsung Apps in .apk. I would lose Kies(I think), but the software is crap, backup and restore works only 70%. But there are more softwares out there that can do what Kies does, only better. So, I don't know, it's something to think about...
Click to expand...
Click to collapse
S voice belongs to samsung not google, google has google voice typing and google voice search
Okay so I wanted to update to lollipop on my inspire 4g because i wanted to use hangouts dialer. Turns out, the CM 12.1 nightlies are highly unstable and sometimes take forever to boot. Most importantly, hangouts keep crashing on CM 12.1 on my inspire and I am not able to make phone calls to phone numbers or to other google users (audio/video) - no problems with using hangouts for chatting/gtalk.
So, I want to go back to 2.3.5 stock where i started. That does not support hangouts dialer, but this CM 12.1 neither - so i would like to roll back to a stable stock ROM.
The problem is, the stock ROM update (RUU_Ace_Sense30_S_Cingular_US_3.20.502.63_Radio_12.69c.60.29U_26.09.13.17_M_release_335423_signed) keeps crashing and fails to roll back.
So, I tried flashing the zip (PD98IMG_Inspire_S-ON_FactoryRestore_GB_1.07) from TWRP 2.8.6.1, but that fails too.
How do I get back to something stable and working? I already wasted at least 30 hours in past 10 days or so. :crying:
Look at our other thread
Thanks Markoll, locking the bootloader did the magic! Now I need a 4.0+ ROM to run Hangouts Dialer or need a Hangouts Dialer ZIP or APK that I can flash on 2.3.5. Any suggestions?
Flash aocp cedarctic jb rom
marknoll said:
Flash aocp cedarctic jb rom
Click to expand...
Click to collapse
Ok thanks- I will give it a shot. Many thanks!
prat1k said:
Ok thanks- I will give it a shot. Many thanks!
Click to expand...
Click to collapse
You're welcome...
How are you liking it?
Sent from my ATRIX HD
i have a mixed feeling about it. 4.2.2 is cool, but it hogs more battery than 2.3.5. And the main purpose behind installing 4.0+ ROM was to enable hangouts dialer. Turns out, i am able to place a call through hangouts dialer, but the call freezes many a times and the app crashes. And I do not receive a call through hangouts at all. So, my purpose is not served. Thinking about going back to stock 2.3.5 now unless you have a better suggestion. thanks for following up!
I too went to original stock for old times sake...it is much more snappier..hehe.. But I then flashed to cm 11 as all the apps I love require 4.0+. Sigh,idk