Thread can be closed now. Problem is now fixed, sort of. Thanks admins/mods.
Hi guys, have been reading a lot on rooting for my Samsung Galaxy SII GTI9100 for quite a while and since yesterday have rooted and flashed Paranoid Android 3.50 ROM with 4.2.2 Jelly Bean, along with Gapps. Everything seemed fine, I did a clean wipe (factory, cache, dalvik) and everything was successful, however when booted up I realised that the wipe wasn't exactly "clean" as I still had most of my data still in my Internal Memory. Along with that, I realised that my Paranoid Android Halo Features were non existent (the reason I chose PA), so I decided to do another clean wipe + flash.
Now I can't exactly remember the turn of events that follows but what happened is that my EXTERNAL sd card seemed to be unmounted after I formatted it thinking that they meant to format the INTERNAL sd card. From this point forward, neither my phone nor my PC is able to detect the EXTERNAL sd card.
I have done multiple wipes, re-flashes, read MANY of threads on xda and other sites, but it seems that with every solution I find, I get another problem. I have tried flashing other PA ROMS, even Stock ROM, but they all give me some kind of error (Status 7 I believe). I tried to do a recovery, but I recieved a md5sum error. Tried to fix that with the various methods including adb but I get "cannot find file/directory" or something along those lines. Some other errors include Signature Verification: Fail, and when I used adb to push the ROM onto my EXTERNAL sd card (surprisingly it managed to be pushed through but I can't see it on my pc/phone) and tried to install zip from there using CWM, it says something like the zip file is (bad).
Currently I'm now stuck on PA 3.50 with Gapps not installed (tried installing many times but it doesn't appear, only worked the first time). Tried with two different Gapps file but I get the usual installation error. Can't install Google Play via any external apk either.
The PA ROM that I currently have is:
pa_i9100-3.50-10MAJ2013-030547.zip
and the Gapps that ORIGINALLY worked on the first try was:
pa_gapps-full-4.2-20130603-signed.zip
Would really appreciate help, it's been more than 12 hours since I've been doing this and I haven't stopped trying except for a couple hours of sleep. Not the first time I'm rooting (have a rooted Touchpad running CM9), but didn't expect things to get so bad.
Sorry for the long post and thank you in advance.
Related
Hi Guys,
After installing the Jellybean version of Resurrection Remix using a clean install like I'd done a million times before, I came across the problem where now the internal "/sdcard" won't mount. I've read a lot of different threads on the web about this but no one seems to have a fix, except for a similar thread from Android Stack Exchange (I can't post it yet).
However, that doesn't work (when I use the ADB shell, I can detect the device, reboot it, remount the /system but not remount the /sdcard). I thought it might possibly be because I tried to fix it a few days ago by formatting the "phone" drive when it popped up on my after connecting it, and the page I referred to talks about the internal SD card being FAT formatted (not NTFS which WIn7 does automatically!).
I've also used Odin to reflash a stock ROM thinking that would fix it, done the whole "format", "factory reset", wiped partitions, caches and delvik caches etc etc to no avail. Now, even when I use recovery to try to mount the /sdcard I get an error, and if I try to format the /sdcard from the recovery menu that doesn't work either.
Problem started with Clockwork Mod 6.6 and so I've downgraded to 5.5 and ICS stock ROM. Still no good.
It's affecting a lot of apps (for example, I can't restore by backup password file to awallet, and it has all my banking details on there!) and I really need to fix it ASAP.
Any ideas?
I'm absolutely desperate and have spent days trying to figure this one out, but I am beat. I need some serious help here and you guys are the ones I think who could help. Anyone??
Cheers,
CJ.
:crying:
So I have had CM10 on my phone for probably 8 months now (almost since I got the phone) and have had no issues with the ROM whatsoever.
I got a notification about an updated version of CM10 today and went ahead and downloaded and installed it, but when I finished the update, I had no personal data left on the phone, could not set up accounts to recover the data, could not (and still can't) recover backups through ROM Manager, and cannot recover backups through CWM. I get an error message which I can't remember at the moment and leads to a bricked phone upon reboot until I do a fresh install of CM10.0.
I read after I started having the issues that I wasn't supposed to directly upgrade from the CM Updater with an S3, but it was already too late. Supposedly the issue is something along the lines of an emulated version of my phone's internal storage? If that makes sense. So whenever it's pulling a piece of information it's looking in the spot it should be in, but on a non-physically-existent SD card, essentially. That's what I gathered anyways.
I have a 32gb external SD Card that is also in use with my S3. I have tried moving my ROM Backups to there and recovering from the External SD Card, but the same error message occurred, although ROM Manager was at least able to find the backups after they were moved (I also had to change the setting and request that it prefer to look through an external SD Card).
So I have a usable ROM as far as the software itself, but I no longer can use any accounts or information that is stored with them or any of the same widgets (not a game-breaker) as I was able to previously. Is there a way to fix this? I've never just been completely stuck before >.<
jkremis said:
So I have had CM10 on my phone for probably 8 months now (almost since I got the phone) and have had no issues with the ROM whatsoever.
I got a notification about an updated version of CM10 today and went ahead and downloaded and installed it, but when I finished the update, I had no personal data left on the phone, could not set up accounts to recover the data, could not (and still can't) recover backups through ROM Manager, and cannot recover backups through CWM. I get an error message which I can't remember at the moment and leads to a bricked phone upon reboot until I do a fresh install of CM10.0.
I read after I started having the issues that I wasn't supposed to directly upgrade from the CM Updater with an S3, but it was already too late. Supposedly the issue is something along the lines of an emulated version of my phone's internal storage? If that makes sense. So whenever it's pulling a piece of information it's looking in the spot it should be in, but on a non-physically-existent SD card, essentially. That's what I gathered anyways.
I have a 32gb external SD Card that is also in use with my S3. I have tried moving my ROM Backups to there and recovering from the External SD Card, but the same error message occurred, although ROM Manager was at least able to find the backups after they were moved (I also had to change the setting and request that it prefer to look through an external SD Card).
So I have a usable ROM as far as the software itself, but I no longer can use any accounts or information that is stored with them or any of the same widgets (not a game-breaker) as I was able to previously. Is there a way to fix this? I've never just been completely stuck before >.<
Click to expand...
Click to collapse
HY, try to flash cm again from theyre website (dont update it), but this time,erase cache 3 times with the command;fastboot erase cache,this may solve your problem.IF I HELPED PLEASE PRESS THANKS!!!!
johnyvlad said:
HY, try to flash cm again from theyre website (dont update it), but this time,erase cache 3 times with the command;fastboot erase cache,this may solve your problem.IF I HELPED PLEASE PRESS THANKS!!!!
Click to expand...
Click to collapse
Just to be clear, you're saying to try and flash CM10.0 and then do not update when prompted from the notification? The other part was clear enough lol.
Edit: Tried the above and did not fix the problem, but I didn't use fastboot specifically because I have a Samsung phone.
The error I'm getting is "unable to mount /system" when I try and restore a backup.
Bump. Still haven't figured this out.
Problem solved.
Re-flashed CM10.1; doing full data, cache, and dalvik wipes before and after the flash; and the problem was corrected.
Hello everydody, I am experiencing some difficulties with my Samsung, model GT-I9003-phone which "dropped off a lorry" somewhere next to my relatives somewhere in Asia. When I goth the device, it was in a non-working condition, except a boot-loop and the download-mode. Back then, I had the package of the phone where the exact version ( I don't know if this is what is called "Baseband" or at least is called baseband at my wife's GT-I5003) was specified. So, back then, I was able to find the exact ROM for the device. Unfortunately, the box with the version number now is - somewhere.
After flashing a stock-rom, I managed to enter recovery-mode where I read something about the internal memory being corrupt. As far as I can recall, I then mounted the external SD-Card and somehow managed to reboot the system back to almost normal operation. Even reboots appeared to work normal, besides the fact I had no memory access, neither to internal nor to external sd. In addition, GPS malfunctioned, too.
Unfortunately, even this state didn't last for long time. After several weeks of now-and-then-use, the system just broke down again into a boot-loop. After some time of flashing a variety of stock roms, I managed to flash clockworkmod recovery which works perfectly well. Unfortunately, I didn't manage to root the phone before it "collapsed" again. Besides the possibility, I'd guess this could be a resaon for CWM being unable to flash a custom rom? Otherwise, I'd just test my way through the varieties of versions .
Basically, I do have two questions: 1. is there a possibility to find out if internal memory has failed - and if yes: How?
2. Is it possible to install any version of CM on that phone in the condition it is in?
Thanks a lot in advance for any answers
Hello everybody, I finally found the box . It reads GT-I9003MKDTHL. Is my assumption right that there are no such things as basebands in the GT-I9003 any more and I should be able to flash pretty much any firmware? Furthermore, today I tried to format what is specified as "sd-card ext" in CWM fir GT-I9003 and it gives me an error-message. When I flash "sd-card", my external sd-card gets formatted. So, I'd presume the internal sd is just fried. I read about a workaround for GT-I 9000, where someone installed Androd on a partitioned external SD. Is there somebody who knows someboy having heard about somthing similar working with the GT-I9903?
One step forward...
Hello everybody, I finally managed to get some light into my issues as I once again figured out how to get a software installed and running . It's this one:
http://forum.xda-developers.com/showthread.php?t=2329200
Thanks a lot to the guy who just posted it somewhere where id could do good...
By the way, I figured out that this software actually includes the Baseband.
As in this version, the original recovery system is running and giving me an error message when I start it without external SD-card, I am now quite sure that the internal memory has just failed as this error message was specified in another posting of someone who had a similar issue with a GT-I9000.
The biiiig "Outch" is, that I am unable to install any CWM Recovery System with that Baseband..This results in me not being able to upgrade the software to ICS, where - as far as I read some troubleshoot-information - will enable me to mount an additional partition on my SD-Card as Data-Partition which isn't possible yet (i.e.: I can't access my SD for storing data or whatever - it's just specified as "not there").
I tried to install the XXKPE-Baseband to be able to go for KPQ which would enable me to install CWM Recovery. I also installed Bagarias CWM-normalboot-image via Heimdall - but I was unable both to boot the OS and to find any trace of a zip-file on the SD-card.
Edit: I managed to install the right CWM - it's mentioned in the post where I've got the firmware from... now, I only have to figure out how to deal with the fact that "officially" there is no SD-card inserted - or, better, that this SD-card is now flagged as "internal SD" - and how that machine can find the zip-file on it
Thanks for every bit of help with that issue
Try Aroma File Manager with Terminal
For SDCard issue you could probably switch them in vold.fstab in /system/etc
Good Luck !!!
try this- http://forum.xda-developers.com/showthread.php?t=2329200
Hi, I've been trying to hunt down an answer to my problem with no avail, hopefully someone here can help. I've a rooted Huawei y300 0100 back on factory stock again.
My problem is this after I rooted (went fine first time doing this) installed TWRP created backups, Flashed Fusion x rom no problems at all, found a few bugs thought I would try another ROM, restored my stock from twrp saved backups all good I thought...
Upon re entering recovery everything is fine, factory wipe etc then when it comes to installing any ROM I get the message E: cannot open zip. This happens on any ROM I try, so I know its not the file, file can also be opened on PC and phone explorer.I've formatted the external SD card and re-downloaded ROMs still nowt.
I would just use the stock again and run a new launcher and delete the bloat myself but I can't get Orbit working at all now I'm rooted and back on factory stock when it was working fine on fusionx and orbit/Pandora are pretty much what I did all this for
Any ideas would be appriecated as I'm pretty noobish at this.
Would installing cwm over the top of twrp work?
Do I need to do a special kind of wipe in case of file corruption?
Solved, after some fiddling got flashing working again. What worked for me was to redownload the file direct to internal SD and flashing from there. Downloading anywhere else ie PC or ext SD and copying across still gave same error. Not sure why but I've flashed 3 ROMs today without issue this way. Hope this helps anyone else who encounters this.
petehippy said:
Solved, after some fiddling got flashing working again. What worked for me was to redownload the file direct to internal SD and flashing from there. Downloading anywhere else ie PC or ext SD and copying across still gave same error. Not sure why but I've flashed 3 ROMs today without issue this way. Hope this helps anyone else who encounters this.
Click to expand...
Click to collapse
Hey Pete, did you flash rom from Int. Sd card or ext. sd card?? Getting the same problem flashing DN3 for note 2 on TWRP 2.7.2.0.
Yay!
petehippy said:
Solved, after some fiddling got flashing working again. What worked for me was to redownload the file direct to internal SD and flashing from there. Downloading anywhere else ie PC or ext SD and copying across still gave same error. Not sure why but I've flashed 3 ROMs today without issue this way. Hope this helps anyone else who encounters this.
Click to expand...
Click to collapse
ABSOLUTELY confirmed. I was trying it for days. After finding this post, direct downloading to sdcard worked for me.
petehippy said:
Solved, after some fiddling got flashing working again. What worked for me was to redownload the file direct to internal SD and flashing from there. Downloading anywhere else ie PC or ext SD and copying across still gave same error. Not sure why but I've flashed 3 ROMs today without issue this way. Hope this helps anyone else who encounters this.
Click to expand...
Click to collapse
yeeah... thank you bro
I also had problems with "unable to open zip file" and "bad" errors, seemed to be fixed by formatting a spare 4gb MicroSD to FAT and making sure it was the first thing copied to the SD card. I was using PHILZ recovery, but I'd assume that TWRP will work just as well. I have a suspicion it may have something to do with file fragmentation or maybe allocation block size. Before this I checked MD5SUMs on a few MicroSD cards and they were all perfect, so it wasn't a download or copy corruption, the bootloader just has an issue with the file or filesystem for some reason.
Can confirm. Was having trouble installing Boeffla 3.0 kernal on gnabo 4.4.2 (v8). ( samsung galaxy note 10.1 n801x / n8013 )
Deleted the zips I downloaded, then re-downloaded straight to zip. installed like a boss!
Thanks!
This is a most underrated thread.
Just had the same issue with my old Galaxy S3. Needed to copy the zip directly to internal storage via mtp in twrp.
In newer twrp version it shows zip file corrupt instead of unable to open zip.
Hi All,
I have a Samsung Galaxy S2 LTE (SGH-I727R, but the same as the SGH-I727) and was wondering how a guy would go about re-partitioning the internal storage on the phone.
The phone has 16gb of internal memory. This has been partitioned, from what I can see, into 2gb and 12gb. The 2gb 'system' partition where your OS and apps, etc are installed and the 12gb storage partition for things like photos, music, movies, etc.
I don't store anything on my phone, mostly just photos. So i have approximately 9gb of the 12gb of the 'storage' partition available. However, the 'system' partition is pretty much maxed out. I'm running Vincom's Superlite CM10.2 rom with minimal apps installed, but it says that i only have around 160mb available and I've begun to received the 'low storage space' error/notification.
I understand that I can use Odin to re-partition the device but that I require .pit files in order to do so. Furthermore, the stock .pit files wouldn't change the size of the partitions. Ideally I'd like to increase the size of my 'system' partition and reduce the size of my 'storage' partition.
Can anyone out there help me? Please let me know if you need more info from my device.
That's not gonna happen
Sent from my HTC One using Tapatalk
how come?
messing around with the partitions will most likely hardbrick the device so no one would ever try doing it, the only way your system partition is filling up is if you are manually installing apps into that partition or the partition is messed up, odin back to stock, then wipe everything including preload then do a fresh install of a custom rom
Will do, I'll update later with results. It's weird though, i haven't manually changed the default installation locations for apps, they just automatically install there. I'll wipe and format everything, odin back to stock, flash the latest version of TWRP and then flash SL CM10.2 and let you know.
Thanks for the help Vincom.
PS - Great roms, thank you for the contributions to the community!
Odin'd back to stock, wiped everything (cache, dalvik, system, data, android secure), formatted USB storage, Odin'd TWRP 2.6.3.0 - everything went fine in that respect.
Booted into recovery, went to flash SL CM10.2 (i dropped these in 'external_sd' after formatting usb storage) and got the following error during the 'making sure you really do have the skyrocket and jb radio' sequence:
'assert failed: run_program (" /tmp/test_radio_vers
E:error executing updated binary in zip '/sdcard
Error flashing zip '/sdcard/external_sd/CM-10.2_
Updating partition deatils...'
Seeing as how I'm attempting to flash from stock rom (which was a GB rom) does it matter that the test sequence is looking for a JB radio?
Thoughts?
also noticed that it won't let me wipe 'data' in TWRP... says failed, with the error 'unable to wipe /data'
rebooted into recovery and now it will let me wipe 'data'....wtf is going on with my phone?
you need todo more reading as u need jb radio or else it will not install cm10.2+ and post an error and sometimes after the error twrp should be rebooted to properly unmount/mount partitions, i think the phone is fine, but the user is another matter..........
i guess i didn't really flash a custom rom until after i upgraded to the Rogers release of JB...? Can't remember... anyhoo, could I simply flash your SL Rogers JB 4.1.2 to obtain the JB radio and then flash SL CM10.2?
Or is there a flashable zip for the radios? I could have sword I saw those some place, but i can't find them now...
banghead
|Read This b4 posting | THE MOST Common Questions Answered HERE | its a sticky right above ur post
thanks for acknowledging/tolerating my stupidity/ignorance, both the 'read this before you post' and '1 stop' threads were helpful.
i did have one more perhaps stupid question that wasn't answer in either of those threads (or at least that I could find), I got SL CM10.2 up and running...bare bones. When checking storage in the settings app, it told me that my total space was 1.97gb and that i had 1.92gb free.... cool. I then rebooted into recovery and flashed gapps lite (12mb) and email/exchange. Rebooted my phone, checked my storage and now i have 432mb free...? This is exactly where i started... i have no apps other than what came with SL CM10.2, gapps lite and email/exchange and only have 432mb available.... any ideas as to what's going on here?
comparatively, i checked my 'apps' in settings, the 'downloaded' tab has nothing, the 'on sd card' tab has nothing, and the 'all' tab indicates that i've used 1.5gb of my internal storage, but when i tally up all the apps in the 'all' tab it totals approximately 40mb... I'm really stuck and it's really starting to frustrate me....
You're frustrating everyone. Do some reading bro.
Sent from my HTC One using Tapatalk
went back and factory reset my phone and even though the apps are all still there, it now says i have 1.92gb available... any idea what might be going on?
nobody is forcing you to read the thread dude...
Jrock_Xtreme said:
went back and factory reset my phone and even though the apps are all still there, it now says i have 1.92gb available... any idea what might be going on?
Click to expand...
Click to collapse
Sounds like you may have been installing the ROM incorrectly. Also one of the first steps of troubleshooting odd issues is a factory reset (Which MUST be done when installing roms of different types) Coming from TW and going to CM like you did requires FULL wipe!!
Jrock_Xtreme said:
nobody is forcing you to read the thread dude...
Click to expand...
Click to collapse
A response like that is not going to help you get too much help around here. @xcrazydx is correct. It sounds like you need to do some more ready.. especially if you are thinking of messing with partitions.
OK wow thread didn't load before I tried to answer lol. Anyway dude is a brick in the making.
Sent from my SGH-I727 using Tapatalk
i did factory wipe before and after flashing each of the roms. As i stated above, the storage glitch occurred after installing gapps and email/exchange... i only wiped cache/dalvik after installing those two. I suppose i should have factory wiped to be safe...
The reason i came asking about repartitioning and .pit files was because i had already searched and found a dev that had created custom partition tables (pit files) but they were for a different phone. I just wondered if anyone in this forum had seen and/or created them.
If not, that's cool, but i figured I'd ask. The only stupid questions are the ones you don't ask!