Database Info

Stuck on LG Logo after flashing a corrupted ROM file

Hi.
So I was flashing a ROM using CWR but it looks like the Zip file was corrupted. So after I selected the zip file, the phone restarted and now is stuck on LG Logo.
Anyway to resurrect the phone from dead?
Any help will be greatly appreciated.

Try power button+vol down+3d button if you can get the recovery....

Claudio67 said:
Try power button+vol down+3d button if you can get the recovery....
Click to expand...
Click to collapse
Thanks for the reply.
When I hold those three buttons the phone started, shows LG Logo for a few second then turns off.
I tried LG Mobile Update tool as well, after I type my Serial and IMEI, it says "Starts downloading data..." then immidately shows a "There a fatal error with LG Update tool, please contact your adminisitrator"

Farhang said:
Thanks for the reply.
When I hold those three buttons the phone started, shows LG Logo for a few second then turns off.
I tried LG Mobile Update tool as well, after I type my Serial and IMEI, it says "Starts downloading data..." then immidately shows a "There a fatal error with LG Update tool, please contact your adminisitrator"
Click to expand...
Click to collapse
When you see the logo release only the power button immediatly after 5-6 second the recovery should appear...
If you will not able to get the recovery look here:
http://forum.xda-developers.com/showthread.php?t=1186406
I had the same problem and:
1) Start LG Mobile update
2) Power off your phone without USB cable
3) Connect the USB cable and wait for the LG logo and the annimation battery
4) Pressing Vol.up + power 6-7 seconde wait for the LG logo and The screen turns off
5) Again pressing Vol.up + power 6-7 seconde and wait until the drivers are installed (LG Mobile update detects your phone and the screen is always off)
Here I was lucky because lgupdater detected my phone and then said that an update was needed. Applied and then everything went fine.
PS sorry for my english...

Claudio67 said:
When you see the logo release only the power button immediatly after 5-6 second the recovery should appear...
Click to expand...
Click to collapse
Oh my God!
I really love you! I went to recovery and thank God I had the KingDroid 3D Rom on my memory card. so I did a full wipe and flashed it and now the phone is back and good again.
THANKS A LOT!!! I really appreciate it.

wow well done!
Cya mate!

Claudio67 said:
When you see the logo release only the power button immediatly after 5-6 second the recovery should appear...
If you will not able to get the recovery look here:
http://forum.xda-developers.com/showthread.php?t=1186406
I had the same problem and:
1) Start LG Mobile update
2) Power off your phone without USB cable
3) Connect the USB cable and wait for the LG logo and the annimation battery
4) Pressing Vol.up + power 6-7 seconde wait for the LG logo and The screen turns off
5) Again pressing Vol.up + power 6-7 seconde and wait until the drivers are installed (LG Mobile update detects your phone and the screen is always off)
Here I was lucky because lgupdater detected my phone and then said that an update was needed. Applied and then everything went fine.
PS sorry for my english...
Click to expand...
Click to collapse
I have the stock v10c ROM on a 'Rogers' LG Optimus 3D.
I had been using the Google+ Android client and pushed the power button to put the phone tosleep (with the G+ screen still being displayed). About 15 mins later I pulled the phone out of my pocket and it was dark, but the touch countrols were all lit up.
I know that usually isn't good news.
I pulled the battery and tried to re-boot. It gets to the Rogers bitmap and then boot-loops, with a flash of the Rogers scren each time it restarts a cycle.
I did vol+down+Power and the it booted into a recovery (3e) menu that only offered me the chance to wipe all user data. Ok. I did that. The phone then presented a triangle logo and the green android and sat there.
After about 10 mins I pulled the battery again and did the Vol+down+3D button+Power boot to the REAL recovery menu.
I then did a factory reset. I have assumed the Home button is the enter button (BTW).
Again the triangle and the green android appear. They are still there 10 mins later.
Not sure what to do now...the phone won't boot and the factory reset won't fix it. But it isn't dead. I can still get to recovery, so in theory this is fixable. I just don't have time for it right now.
I was wondering if maybe the phone had updated OTA in my pocket and i didn't realise it and I may have messed up the process. But I have never seen a phone do an OTA update without first notifying the user and seeking confirmation...so I that probably isn't the case.
Very annoying.
I'm posting this here in case anyone else has the same experience.

i think i brick my phone pls help

guys i restore a nandroid backup on my phone and now it wont pass the lg logo
and i try to go to nvidia recovery by pressing and hold vol down and power
but it wont go either it still stays on lg logo.
what can i do to fix this!!!!

gypsy214 said:
guys i restore a nandroid backup on my phone and now it wont pass the lg logo
and i try to go to nvidia recovery by pressing and hold vol down and power
but it wont go either it still stays on lg logo.
what can i do to fix this!!!!
Click to expand...
Click to collapse
Follow the instuction in this thread.
http://forum.xda-developers.com/showthread.php?t=1056847
After you have recovery working properly download a rom and install via recovery.

i did as you can see i have the drivers on my computer but somehow this phone wont go pass lg logo so my computer is not recognize the phone

ok i did flash recovery again but when i press vol down and power buttons it wont do nothing it stays on lg logo

gypsy214 said:
ok i did flash recovery again but when i press vol down and power buttons it wont do nothing it stays on lg logo
Click to expand...
Click to collapse
Hmmm....After holding power and vol down the android screen should pop up. Then release the buttons and it should go into the menu. I have no idea why the recovery did not successfully install.
Have you used the one-click method before on the G2x?

i did flash one click recovery and it did fine but my phone would not go to recovery at all i held those bottoms for a minute and still now i did this
http://forum.xda-developers.com/showthread.php?t=1248644
and now it wont even go to the lg logo it just stay black no recovery no lg logo. idk what else to do other than ask for a replacement

gypsy214 said:
i did flash one click recovery and it did fine but my phone would not go to recovery at all i held those bottoms for a minute and still now i did this
http://forum.xda-developers.com/showthread.php?t=1248644
and now it wont even go to the lg logo it just stay black no recovery no lg logo. idk what else to do other than ask for a replacement
Click to expand...
Click to collapse
Well crap...that sucks. Maybe the partitions got messed up. A few people have had that issue. It can create all sorts of trouble. Or it could possible an ext 3 vs ext 4 issue depending on what rom you had and what you restored. It will take someone a lot more knowledgeable than myself to help you. Good luck.

Take battery out put it back in then hold volume down and power

i did that but ever since i flash the rom on the recovery to if it help to flash partition on it the phone die completely it would not do anything and stays on a black screen.
it wont even try to bootup
anyways i tried several methods and non of them worked other than ****ing it up more.
so i just called tmobile and asked for a replacement and it should be here tomorrow.
thanks to all the tried to help

It's not bricked. It turns on and boots. Just clear the Dalvik Cache in Clockworkmod Recovery.

jboxer said:
It's not bricked. It turns on and boots. Just clear the Dalvik Cache in Clockworkmod Recovery.
Click to expand...
Click to collapse
how can i clear the Dalvik Cache if the phone wont do anything not even go to recovery

gypsy214 said:
how can i clear the Dalvik Cache if the phone wont do anything not even go to recovery
Click to expand...
Click to collapse
Then use the One Click Recovery Flasher in APX mode to reflash recovery, then try to go into recovery again by turning on while holding the volume down key. If that doesn't work then find the method for flashing the Gingerbread ROM in APX mode. If that doesn't work I have no other suggestions for you.

I'm in the same situation with my G2x. Were you able to fix it? If so, how?
Update: Got it fixed. As jcbofkc recommended, doing the OneClick NvFlasher got me back up and running. Thanks!

commensal42 said:
I'm in the same situation with my G2x. Were you able to fix it? If so, how?
Update: Got it fixed. As jcbofkc recommended, doing the OneClick NvFlasher got me back up and running. Thanks!
Click to expand...
Click to collapse
man i used one click recovery the the phone just got dead completely. before i did that i only could see the lg logo and that sit. then it just got black and wouldnt turned on at all. it was a good thing i got insurance on it so i order a replacement it only cost me 5 bucks and got the other one.

[Q] lg optimus 3d p920 not working

hi i have my optimus 3d not working
version:v20f
i restarted it and when it boot only there is a lg logo soo what i doo please helpppppp:crying::crying::crying::crying:
sorry for my bad english

when phone turned off, press 3D button + vol. down + power and you should appear in CWM Recovery.
First try to wipe cache,if it doesn't help,you'll have to wipe data/factory reset.

not working
arsen4oo said:
when phone turned off, press 3D button + vol. down + power and you should appear in CWM Recovery.
First try to wipe cache,if it doesn't help,you'll have to wipe data/factory reset.
Click to expand...
Click to collapse
i try these before and also not working ::::::::

you may try to recover your phone from LG mobile support tool.
or flash a rom with this tutorial: http://forum.xda-developers.com/showthread.php?t=1244490

jwanooo.ooo said:
hi i have my optimus 3d not working
version:v20f
i restarted it and when it boot only there is a lg logo soo what i doo please helpppppp:crying::crying::crying::crying:
sorry for my bad english
Click to expand...
Click to collapse
What changes did you make before restarting ?
By the LG Logo are the touch key lights on or off?

How to hard reset KU3700 when stuck at "udc_start()"

I'm trying to hard reset Korean KU3700. I've pressed Home+Volume Up and holding them pressed Power button.
Each time I try this I got stuck with screen displaying:
Fastboot mode started
udc_start()
And that's it. No other menu option for resetting. Phone itself is fully switching on without any problem, but as far as the screen is locked with a forgotten password I want to hard reset it without installing another firmware.

Take battery out. Hold power+ down+home. It should reset if you are on stock rom
Sent from my NFEfied P500

allenwalker1998 said:
Take battery out. Hold power+ down+home. It should reset if you are on stock rom
Sent from my NFEfied P500
Click to expand...
Click to collapse
Seems like it is not stock Rom.
Actually, that message appears and stuck when those key combinations are pressed.

allenwalker1998 said:
Take battery out. Hold power+ down+home. It should reset if you are on stock rom
Sent from my NFEfied P500
Click to expand...
Click to collapse
hi. i can't restore lg ku3700. i need your resetter file. help me

[SOLVED] [LG D160] stuck in bootloop, factory reset does nothing

The phone is stuck in a boot loop at the LG screen, and makes the annoying boot sound every few seconds.
I have tried to start in Safe Mode by holding down POWER and VOLUME DOWN until the LG screen hits, then releasing POWER and pressing POWER again. Instead of starting in Safe Mode, the Factory Reset option comes up. I have tried the factory reset but it does fix anything - the phone still is stuck in a boot loop.
Lastly, when I plug it into my computer via USB, my computer does not recognize anything (using both Mac OS X and Windows). I have tried installing the LG drivers from the LG support website on Windows, but they do not recognize the phone when plugged in.
How can I completely wipe everything and start from a fresh installation?
Thanks in advance

Does anyone have any idea on how to proceed yet? From my understanding, the phone is soft bricked since it is stuck in a boot loop. Starting in Recovery Mode (Power+Volume Down) doesn't work, instead the option for a Factory Reset pops up. Doing the Factory Reset does nothing. Should I try rooting the phone? Or should I try using the LG Flash Tool?

You need to return to stock LG firmware using LG flashtool
turn off your phone and connect your usb cable while you hold the volume up button to enter download mode

Hi jax256,
thanks for your reply. Would you happen to know of a reliable source where I can find the stock LG firmware?

try this link
http://lg-phone-firmware.com/index.php?id_mod=47

jax256 said:
try this link
http://lg-phone-firmware.com/index.php?id_mod=47
Click to expand...
Click to collapse
Thanks jax256! After a few tries, I was able to successfully return to stock.

lgand said:
Thanks jax256! After a few tries, I was able to successfully return to stock.
Click to expand...
Click to collapse
you're welcome, glad to help.