Hi , i'm trying to install modded stock rom in my viewpad10s ... i install AUDI in my pc (windows 7 32bit). I turn off my tablet.
Conect the power cable, and usb cable... open AUDI, turn in recovery mode (2 secs back button+2secs powerbutton+out power button and 2 secs out back button), and windows dettect device, and say me DEVICE UNKNOWN cant install ...
and nothing more ...
i try with other usb port, reboot pc, install drivers in audi and the recovery mode ... and ever do something error
another idea ?
I need a little help my device is stuck in apx mode (blank screen with power led on) i have uid (cpuid) and sbk i have read a lot fom this forum and have all the tool to root, flash, load.. But my main problem is that when i reset my acer a500 and the usb is attached the windows 7 recognizes the driver and (sound pops up) and the driver (acer picasso usb boot recovery driver) is there but no tool e.g apxtool or fastflash or ics rooting nothing works or regocznies the device coz when i press any option or press the key to continue the drive drops and vanishes from the window usb list in device manager and i have to manually reset acer again to get the driver back but still no use as command prompt tells me that no device is attached or found. Please help as this acer is my wifes gift to me and im trying hard to get it back its totally dead
Everything I've done as need sp flashtoolem, at the end of the show, a green check mark.
I disconnected the phone, try on and a button. Nothing responds to the charger, USB cable, or turning on Power.
After connecting the computer it does not detect it. Only when I press the volume down without batteries -It then begins installing drivers but every now and then connects to and disconnects the wilderness as a button hangs up pretty. On the Windows7 installs drivers and any Alcatel is device manager tab network adapters.
Under Windows XP, as the same thing I'll do is I choose the drivers and install mtk usb driver or something like that.If I hold the button volume down sees it but every now and then hangs up and connects. Turn on the SP flash rom going and what I did not press does not react, just as without battery and vol -, the program reacts goes red bar and pops up an error
bromine error s_ft_enable_dram_fail (4032)
I tried this rom with Jiayu Poland and pulled like Stocka F1WW-20140714-200639 -PC-update-foreign language
Previously , he was compiling 20150426 ,Nowhere can I find such romu
So much is happening with the phone. More I can not demented and I do not want him quite a blow.
ps. sorry for my English
No one can help? Where to find this rom?
hello guys. i got a oneplus one from a fren which was running on the stock rom smoothly. he updated the stock rom from the small update package that displays in the rom one 1 week back and since the update loudspeaker were not running, vol up and down button not working ( though ear peice vol up down works ) and usb port was charging but was not detected by pc.
i looked at him phone and went to the 3 dot menu of the storage option after connecting to my pc but when i clicked on the usb computer connection option, it would alwasys tell that usb in now disconnected.
it does not hav a custom recovery or unlocked boot loader . but i was able to get in fastboot mode from the advanced reboot option. but still the phone was not detected by pc ( i hav the adb drivers installed ).
so as i was desperate i did a dirty flash of cm-12.0-YNG1TAS17L-bacon-signed on the existing rom from the cyanogen recovery. and now when i boot this phone it gets stuck on the cyanogen boot logo.
now i cant do anything from the limited hardware buttons. ( vol up down button not working and one plus one not detected on PC )
plzzz someone help
hello guys, i have a problem with my lenovo A850i.
after flashing, my phone cannot on, i check my battery and its still in good condition, i try to flashing one again using SP flash tool, and now my phone were not detect by pc, the led will light up when i remove the battery when it connect to usb, but when i put back the battery,the light will close. i connect to usb and try mane button combination , but still not work...
i have been stuck with this about 3 day, i hope someone can help me..
Sorry for my broken englosh...
What did you flash exactly? You sure you flashed something that's specifically made for your phone ?
Also what combination have you tried yet.
Download another stock rom for your phone load scatter text ,click download and connect your phone to PC via USB while holding the vol+button only
northwindtrades said:
What did you flash exactly? You sure you flashed something that's specifically made for your phone ?
Also what combination have you tried yet.
Download another stock rom for your phone load scatter text ,click download and connect your phone to PC via USB while holding the vol+button only
Click to expand...
Click to collapse
Yes sir, im very sure that i flash lenovo A850i firmware, do u have any other combination for me to try to make my phone connected to pc, i have try holding vol+ button while connect to pc via usb, but it not work, all i have now just a red led light that turn on without battery
jimbo94 said:
Yes sir, im very sure that i flash lenovo A850i firmware, do u have any other combination for me to try to make my phone connected to pc, i have try holding vol+ button while connect to pc via usb, but it not work, all i have now just a red led light that turn on without battery
Click to expand...
Click to collapse
Meta mode( usually vol+ button) is the most successful way of of recovering from a hardbrick for lenovo but after looking up your device you guys coonect meta mode dffrntly.now this is the most successful way of unbricking your phone
pick the official ROM for A850i came with A850_203 multilanguage firmware.
You'll need MTK 65XX metamode driver – USB VCOM Preloader driver, if you previously installed then there is no need.
SP Flash Tool to download the firmware to the phone.
(Make sure you have a working version as some so tool don't work as they're supposed to into ,I'm using version 5.1)
Run SP-Flash Tool, map the scatter loading MTK6582 for your firmware, normally inside the firmware folder. It will mapped the necessary file and partition for your device, After that click Download and leave it searching for device, it will start flash when found the device,
so next we need to activate back the dead phone of Meta mode USB Vcom MTK65xx , firstly remove the battery, simply press and hold VOLUME UP & DOWN + Power Button simultaneously while reinsert USB that connect the phone to PC.
The previous SP Flash that searching for device will start the download process just after the META mode activated, if you failed then try repeat the step :fingers-crossed:
And hit the thumps up button if this post has been helpfull good luck:good:
northwindtrades said:
Meta mode( usually vol+ button) is the most successful way of of recovering from a hardbrick for lenovo but after looking up your device you guys coonect meta mode dffrntly.now this is the most successful way of unbricking your phone
pick the official ROM for A850i came with A850_203 multilanguage firmware.
You'll need MTK 65XX metamode driver – USB VCOM Preloader driver, if you previously installed then there is no need.
SP Flash Tool to download the firmware to the phone.
(Make sure you have a working version as some so tool don't work as they're supposed to into ,I'm using version 5.1)
Run SP-Flash Tool, map the scatter loading MTK6582 for your firmware, normally inside the firmware folder. It will mapped the necessary file and partition for your device, After that click Download and leave it searching for device, it will start flash when found the device,
so next we need to activate back the dead phone of Meta mode USB Vcom MTK65xx , firstly remove the battery, simply press and hold VOLUME UP & DOWN + Power Button simultaneously while reinsert USB that connect the phone to PC.
The previous SP Flash that searching for device will start the download process just after the META mode activated, if you failed then try repeat the step :fingers-crossed:
And hit the thumps up button if this post has been helpfull good luck:good:
Click to expand...
Click to collapse
Okay, i will try it first