Related
thanq for viewing ma thread.. i moderate noob cz i researched many things about rooting, flashing, etc., but still i have some confusions..
basically i rooted my htc explorer with jaggy rooting tutorial. so now i want to flash with [DEV][ROM][ICS][4.0.4][IMM76L]Unofficial CyanogenMod 9.1 for Pico Build#9 {3/11/2012} rom.. buti have somedoubts pls kindly clarify me..
1. is there any problem with cm9.1. i read that it drain in half a day even in normal use.. is that true..
2. now i have Yannou's recovery..can i flash thru that..
3. before flashing should i partition ma sd card or can we do dat after flashin?? if i should do partition which is best ext2/3/4 or fat32. now ma sd card isnt partitioned once also. so can i do before flashing then after have to move cm9.1 rom zip file to sd card.
4. i read that partition can also be done with recovery menu.. is that true. if yes. how to do that.. i read partition for s2e(http://forum.xda-developers.com/showthread.php?t=1859691- here) what about link2sd.. can we partion for link2sd by(http://forum.xda-developers.com/showpost.php?p=29724634&postcount=3 ) with that can we do.. will it work for cm9.1.
5. i read instruction for for flashing cm9.1 rom. there are two different methods which one to follow.
Installation
First time installing CyanogenMod 9 to your Htc Explorer/Pico, or coming from another ROM:
- Make sure you're running a proper working ClockworkMod-Recovery
- Copy GApps and CM9 ZIPs to your SDCard
- Boot into Recovery
- Flash CM9 zip from SDCard
- Flash GApps zip from SDCard
- DO A DATA WIPE / FACTORY RESET (otherwise your device will be stuck at boot)
- Reboot
- Don't restore data using Titanium Backup! they might cause FC's
- Restoring Apps + Data might cause problems and is not recommended, avoid it if possible! (metioned in http://forum.xda-developers.com/showthread.php?p=29938916) or (http://forum.xda-developers.com/showpost.php?p=33608084&postcount=2897).
please help me.. waitin for ua valuble reply..
Guide
Hey there
1. The battery life depends on how you use your phone. If you’re connected to a 3G network all day while playing or watching videos, the battery won’t last that long. For casual everyday use, the battery is great. I didn’t charge it for 2 days once
2. Yes, you can flash through yannou’s recovery but it would be ideal if you flash CWM recovery since it’s recommended. If you partition your sd card, it will be automatically formatted so its best if you back up your data, partition the sd card and then copy all the files. You can partition using CWM and then install Link2sd which, when opened, it will prompt you with the file system of your sd ext. Choose ext3 and reboot. The partition itself isn’t needed for cm9.1 but you can you a2sd scripts if you’re partitioned.
3. To flash it, download the rom and gapps. Put them in the sdcard. Then boot into recovery, wipe data/factory reset, go to advanced -> wipe dalvik. Then install zip from sd card and find the rom. After you flash the rom, flash the gapps and reboot. Give it a few minutes since the first boot takes some time. And there you go
_______________________________________________________________________________________________________________________
Remember to hit the thanks button! It won’t hurt, I promise
bijgu said:
Hey there
1. The battery life depends on how you use your phone. If you’re connected to a 3G network all day while playing or watching videos, the battery won’t last that long. For casual everyday use, the battery is great. I didn’t charge it for 2 days once
2. Yes, you can flash through yannou’s recovery but it would be ideal if you flash CWM recovery since it’s recommended. If you partition your sd card, it will be automatically formatted so its best if you back up your data, partition the sd card and then copy all the files. You can partition using CWM and then install Link2sd which, when opened, it will prompt you with the file system of your sd ext. Choose ext3 and reboot. The partition itself isn’t needed for cm9.1 but you can you a2sd scripts if you’re partitioned.
3. To flash it, download the rom and gapps. Put them in the sdcard. Then boot into recovery, wipe data/factory reset, go to advanced -> wipe dalvik. Then install zip from sd card and find the rom. After you flash the rom, flash the gapps and reboot. Give it a few minutes since the first boot takes some time. And there you go
_______________________________________________________________________________________________________________________
Remember to hit the thanks button! It won’t hurt, I promise
Click to expand...
Click to collapse
did u use CM9.1 .
is flashing process is same for yannou’s recovery.
i know about yannou’s recovery.. but what about CWM recovery.. from where i can get dat.. cus jaggy flashing process providing only yannou’s recovery.. so how can i shift to CWM recovery..
bijgu said:
Hey there
1. The battery life depends on how you use your phone. If you’re connected to a 3G network all day while playing or watching videos, the battery won’t last that long. For casual everyday use, the battery is great. I didn’t charge it for 2 days once
2. Yes, you can flash through yannou’s recovery but it would be ideal if you flash CWM recovery since it’s recommended. If you partition your sd card, it will be automatically formatted so its best if you back up your data, partition the sd card and then copy all the files. You can partition using CWM and then install Link2sd which, when opened, it will prompt you with the file system of your sd ext. Choose ext3 and reboot. The partition itself isn’t needed for cm9.1 but you can you a2sd scripts if you’re partitioned.
3. To flash it, download the rom and gapps. Put them in the sdcard. Then boot into recovery, wipe data/factory reset, go to advanced -> wipe dalvik. Then install zip from sd card and find the rom. After you flash the rom, flash the gapps and reboot. Give it a few minutes since the first boot takes some time. And there you go
_______________________________________________________________________________________________________________________
is it necessary to wipe dalvik bcause i didnt do it and it works fine
Click to expand...
Click to collapse
No, no, stick with yannou's! Official cwm sometimes give's mounting issues with our phone, and sometimes if you drain fully your battery you'll get in to adventure.
Yes flashing process is the same, basikly everything is the same as cwm
Install ROM Manager on your phone and the first option should be to install Clockworkmod Recovery. Follow the instructions on screen. I'd use yannou's recovery though.
Yes, the instructions are the same for yannou's recovery.
And yes, I've used cm9.1 for over 2 months. I'm using HTC sense 4.0a rom by derefas right now
Remember to hit the thanks button! It won’t hurt, I promise
cool
shree alwaz said:
thanq for viewing ma thread..
Click to expand...
Click to collapse
Here is my opinion and instruction
1. is there any problem with cm9.1. i read that it drain in half a day even in normal use.. is that true..
Click to expand...
Click to collapse
I am not sure about the build #9 but build #11 is really cool.. Here is the link. U also get the link form the post u mention above under the page 305
http://teamthundersquad.blogspot.in/2012/11/cm-9-nightly-build-11-for-htc-explorer.html
But as far i heard nothing wrong with build#9 too. So try both..
Click to expand...
Click to collapse
2. now i have Yannou's recovery..can i flash thru that..
Click to expand...
Click to collapse
Nothing serious with this matter. Almost all recovery will work with this ROM. But my opinion is use TWRP recovery, it provide lot of feature also its provide touch support and ext partition support also....
Click to expand...
Click to collapse
3. before flashing should i partition ma sd card or can we do dat after flashing?? if i should do partition which is best ext2/3/4 or fat32. now ma sd card isnt partitioned once also. so can i do before flashing then after have to move cm9.1 ROM zip file to SD card.
Click to expand...
Click to collapse
its depends upon Ur need man. If Ur going to use internal memory increasing script u must have an 2nd partition in Ur SD card. ext2/3/4 is depend upon the memory script and ROM Ur going to use..
My Suggestion:
Try m2sd script with ext4 partition its work like a charm.. but i read from some post ext4 will damage SD sooner. but perform better. i am always need performance. but i am sure that till now no damage or performance issue occurred in my SD card as well as phone.
before or after partition is ur choice when u need partition u do it. But some ROM need 2nd partition while flashing be careful on that but cm9.1 doesn't need any support from sd card
Click to expand...
Click to collapse
5. i read instruction for for flashing cm9.1 rom. there are two different methods which one to follow.
Installation
Click to expand...
Click to collapse
Both the instruction telling the same thing for u. Here is my guide as same like they stated...
1.copy Ur ROM and GAPPS zip to ur SD-card
2.wipe all the partition data,cache,system,dalvik,etc... except SD-card
3.install ROM zip then install GAPPS zip.
4.Then reboot..
5.wait until u get the home screen.. first boot take some time so be patient
6.After that leave Ur phone for a minute then once again restart Ur phone.
7. final but important click thanks to the Developer and other who help u to install the ROM successfully..
this instruction is for clean installation this will never lead Ur device to problem
Click to expand...
Click to collapse
thanq u all.. but i have some clarification about partiton only.. can anybody give me guide about partitons for CM9.1 . which is best, simple and error free, wheather to go partition then flashing or flashing then partition.. and plz give me guide thru recovery.. and where its pre or post flashing.. pls do needful..
edit :
im unable to figure it out abot s2e scripts, int2sd scripts.. so please tell me actually what are those and how the linked with ext2/3/4 partitioms..
Its simple if ur using recovery for partition u will lose all the data in SD card. So use mini partition wizard tool for make partition.. after or before flashing is does not matter if u going to add memory script then partition memory card... then add the rom zip then flash it..
Sent from my HTC Explorer A310e using xda app-developers app
As much as i remember, Older builds of CM9.1 had battery drain problems. It has been rectified in the latest builds (Aleast have been rectified in build 10 and 11)
I say you go for CM9.1 Build 11 by ayushrox. I am using it right now. I run my phone with extensive Music usage for 1 and half to 2 days. I have once kept my phone running without charge for 3 days. Right now as i type, i am off the charger for 12 hours, still i have 55% battery remaining, this is good for me, as i use an always on internet.
I never used CWM. I use a different recovery (i dont know its name), and i flash using it successfully.
I use Link2SD with a partition i made BEFORE the installation. I use Minitool Partition Wizard to create partitions. It is for Windows.
I always ask people to do a clean install. This would eradicate any issues in the future.
vasanth3008 said:
Its simple if ur using recovery for partition u will lose all the data in SD card. So use mini partition wizard tool for make partition.. after or before flashing is does not matter if u going to add memory script then partition memory card... then add the rom zip then flash it..
Sent from my HTC Explorer A310e using xda app-developers app
Click to expand...
Click to collapse
Can u explain what are those sd scripts. What it'll do with the partition. Plz explain me.
Sent from my HTC Explorer A310e using xda app-developers app
tatiraju.rishabh said:
As much as i remember, Older builds of CM9.1 had battery drain problems. It has been rectified in the latest builds (Aleast have been rectified in build 10 and 11)
I say you go for CM9.1 Build 11 by ayushrox. I am using it right now. I run my phone with extensive Music usage for 1 and half to 2 days. I have once kept my phone running without charge for 3 days. Right now as i type, i am off the charger for 12 hours, still i have 55% battery remaining, this is good for me, as i use an always on internet.
I never used CWM. I use a different recovery (i dont know its name), and i flash using it successfully.
I use Link2SD with a partition i made BEFORE the installation. I use Minitool Partition Wizard to create partitions. It is for Windows.
I always ask people to do a clean install. This would eradicate any issues in the future.
Click to expand...
Click to collapse
After partition how to make scrpits for partition. Plz I heard that int2sd, mount2sd sripts. What are those.
Sent from my HTC Explorer A310e using xda app-developers app
shree alwaz said:
After partition how to make scrpits for partition. Plz I heard that int2sd, mount2sd sripts. What are those.
Sent from my HTC Explorer A310e using xda app-developers app
Click to expand...
Click to collapse
I have never used Mount2SD and int2sd
When you create a partition in your memory card, open Link2SD. Link2SD will ask you the partition type, select and tap ok. The app creates mount script by itself.
Link2SD is a 500KB app at the Play Store.
tatiraju.rishabh said:
I have never used Mount2SD and int2sd
When you create a partition in your memory card, open Link2SD. Link2SD will ask you the partition type, select and tap ok. The app creates mount script by itself.
Link2SD is a 500KB app at the Play Store.
Click to expand...
Click to collapse
So which is best link2sd or mount2sd for cm9.1 built 11. Can do parttion after flashing cm9.1. My doubt is if I flash the rom then Rom considers the memory of 150mb. So then after if I make patition will it change its internal memory from 150mb to partitioned memory. Pls. Explain me. Anyone.
Sent from my HTC Explorer A310e using xda app-developers app
Nobody don't know about ma query. Help me guys.
Sent from my HTC Explorer A310e using xda app-developers app
tatiraju.rishabh said:
As much as i remember, Older builds of CM9.1 had battery drain problems. It has been rectified in the latest builds (Aleast have been rectified in build 10 and 11)
I say you go for CM9.1 Build 11 by ayushrox. I am using it right now. I run my phone with extensive Music usage for 1 and half to 2 days. I have once kept my phone running without charge for 3 days. Right now as i type, i am off the charger for 12 hours, still i have 55% battery remaining, this is good for me, as i use an always on internet.
I never used CWM. I use a different recovery (i dont know its name), and i flash using it successfully.
I use Link2SD with a partition i made BEFORE the installation. I use Minitool Partition Wizard to create partitions. It is for Windows.
I always ask people to do a clean install. This would eradicate any issues in the future.
Click to expand...
Click to collapse
Previously i flashed cm 9.1 build 11 by ayushrox but it was giving me some problems 1.wifi was not working it always showed an error 2.when i tried to reboot or switch off my cell it used to get hang so i had to remove and re insert battery to make it work ... now i've switched back to build 9 and its running fine except for the video i record have no sounds in them but thats ok for me coz i usually dnt use my cell camera
help
please temme. today i wanna flash the cm 9.1. plz temme which is best built9 or 11.. what do u people say which is best for daily use, all things should work, games should support like backstab, shadowgun, nfs mostwanted like that.. and it should not drain fast.
n i wanna make partition of ma 8GB class4 sd card before flashing using mini partiton tool. so which is best ext2/3/4 or fat32. n which is best link2sd, mount2sd or anything else. and i no need to create/modify/change the mounts for those apps to use.. cz im not able to figure out what is that mounts acctually. n what is the use of those mount. if anybody explains about those im very much gladful.
n before partition i need to take backup.. it mean i need just copy paste the all the folder which are there in sd card.. its that correct or any method to use.. to get backup.
finally give me exact intraction to flash.. consider i had partiton sd card..
pls help.. ill make flash n wanna eat icecream sandwich today it self.. :crying:
ZaKa123 said:
Previously i flashed cm 9.1 build 11 by ayushrox but it was giving me some problems 1.wifi was not working it always showed an error 2.when i tried to reboot or switch off my cell it used to get hang so i had to remove and re insert battery to make it work ... now i've switched back to build 9 and its running fine except for the video i record have no sounds in them but thats ok for me coz i usually dnt use my cell camera
Click to expand...
Click to collapse
I never had any of those problems.
---------- Post added at 05:56 PM ---------- Previous post was at 05:48 PM ----------
shree alwaz said:
So which is best link2sd or mount2sd for cm9.1 built 11. Can do parttion after flashing cm9.1. My doubt is if I flash the rom then Rom considers the memory of 150mb. So then after if I make patition will it change its internal memory from 150mb to partitioned memory. Pls. Explain me. Anyone.
Sent from my HTC Explorer A310e using xda app-developers app
Click to expand...
Click to collapse
I never used Mount2SD and never will, cos link2sd works well for me.
Here is what i did:
1. Partition microSD with format ext2. (I used Minitool Partition Wizard for this. A freeware program for Windows)
2. Insert it in the phone, download Link2SD from Play Store.
3. Open Link2SD, it will prompt you to select your partition type. Select ext2.
4. Link2SD will create a mount script and ask you to restart the phone. Do so.
5. After restart, go back to Link2SD, press menu button to open menu.
6. Open "Settings". Make sure "Auto link" is ticked.
7. Exit Link2SD, do a restart.
Thats it! now whenever i install an app, Link2SD sends it to the partition automatically.
Sometimes you may get a phone memory full notification. In that case power off your phone and on it again.
EDIT: all this was done with CM9.1 previously installed.
So what are steps to install cm9.1.
Is it necessary to clear dalvik cache.
Sent from my HTC Explorer A310e using xda app-developers app
I flashed the latest sense 4.0 rom by apex-predator, followed all the instructions, and it didn't boot. I changed the sd-ext to ext3 as in case of any boot up problem, but to no use. Then I decided to flash stock rom, it didn't work either but earlier everything was working fine in this case, i mean flashing roms, stock and / or custom ones.
Moving over, I installed Xenon Systems rom, it successfully booted but after initial setup it gave my an annoying low internal memory notification, whereby I just completed the initial setup and didn't install any new apps except that came with the rom. It shows about 248 KB or so left.
I am unable to open messages, make phone calls n bla bla that need some memory. FYI, the rom was not overclocked and everything was previously working fine without overclocking as some threads suggest that overclocking may fry the NAND storage.
Looking forward to a positive reply on this issue.
Regards.
Give a try to NAND recovery process by cute prince.
Sent from my HTC Explorer using xda premium
Can you send the link to cute prince's thread, please!!
vikingmax said:
Can you send the link to cute prince's thread, please!!
Click to expand...
Click to collapse
here you go
but before doing process check that you have wiped phone clean via CWM or TWRP ie factory format/reset, format system, dalvik, sd-ext......install a known working rom and check internal space left, if you still have low space issue then following the proceedure in the link below.......use at your own risk
http://forum.xda-developers.com/showpost.php?p=36868966&postcount=2367
LiVeRpOoL-FaN said:
here you go
but before doing process check that you have wiped phone clean via CWM or TWRP ie factory format/reset, format system, dalvik, sd-ext......install a known working rom and check internal space left, if you still have low space issue then following the proceedure in the link below.......use at your own risk
http://forum.xda-developers.com/showpost.php?p=36868966&postcount=2367
Click to expand...
Click to collapse
Here's the deal now. I am using TWRP and I wiped everything you said above. Stock rom is not able to boot, but Xenon System's rom made it through. It still gave low memory notification. I reverse mounted the memory and it worked for now. Showing 1.5 GB as internal memory, as I have allocated that much for sd-ext partition.
What do you suggest now, shall I try cute prince's tutorial, coz I think the above thing is temporary with this rom and low memory issue will come again if I again flash stock rom or some other custom rom.
Regards.
Hi All,
I had rooted my phone a long time back and to clear up some memory i factory reset it. Now i am stuck on the white screen with htc logo . Please tell me what to to . I have no backups as well , as i ended up formatting my memory card while trying to create a partition on it.
When i start the phone in recovery mode this is what i get (Pico CMW-Based Recovery v5.0.2)
Code:
***UNLOCKED***
PICO PVT SHIP S-ON RL
HBOOT - 1.00.0000
RADIO - 1.10.81.17
Sep 29 2011 , 14:22:22
HBOOT
<VOL UP > to previous item
<VOL DOWN> to next item
<POWER> to select item
FASTBOOT
RECOVERY
FACTORY RESET
SIMLOCK
Please help.
Thanks
http://forum.xda-developers.com/showthread.php?t=2189199 just flash stock zip from here, or flash some custom rom from development sections, next time, read rooting tutorial through the end, and don't do factory reset
works !
shortyoko said:
http://forum.xda-developers.com/showthread.php?t=2189199 just flash stock zip from here, or flash some custom rom from development sections, next time, read rooting tutorial through the end, and don't do factory reset
Click to expand...
Click to collapse
Yes Sir, will read it for sure
Thanks , your answer solved my problem
Now i plan to install the JaggyRom 4.0.3 on my HTC Explorer. Do you think its a good idea ?
I only have a 2GB SD Card , is there any requirement that i have to convert at least 1GB to ext partition before installing the ROM.
Any other things which you would suggest i take care of before proceeding ?
Thanks a lot
Give link to rom which you wan't to install.
Especially Jaggy 4.0.3 was GB with sense 3.5 I THINK, so you don't need 1gb ext, even 512 will do. If it's ICS with sense 4 you need 1gb ext.
My advice: Don't worry if first time it stucks on white htc screen, if this happens, just try wiping everything again and flash again.
And another thing you can download this http://www.mediafire.com/download.php?lim1od8qrjdbblp you flash it before you flash the rom, it wipes everything by it self, I'm not sure how it works with sense 4, but for every athor rom it's fine.
Hi,
sorry not allowed to post the links yet.
androidforums[dot]com/explorer-all-things-root/656605-rom-sense-jaggyrom-4-0-3-12-10-12-a[dot]
please edit the link
I think i shall try this one now, and once i get the knack of it , i'll buy myself a bigger memory card and try ICS
Please let me know if i should go forward with it.
Thanks for the help .
Uff ya, forgot about links restriction, with this one you don't need more than 512mb of ext. Just don't forget to flash 'wi-fi fix' after install and follow the instructions.
With this one you also can use the 'superwipe.zip' that I've posted in the previous post, instead of wiping everything manually, whichever suits you best.
Also if you wan't you can check out cm9, it's ICS and its stable, for it you don't need 1gb ext partition. Well that's it, have fun
shortyoko said:
Uff ya, forgot about links restriction, with this one you don't need more than 512mb of ext. Just don't forget to flash 'wi-fi fix' after install and follow the instructions.
With this one you also can use the 'superwipe.zip' that I've posted in the previous post, instead of wiping everything manually, whichever suits you best.
Also if you wan't you can check out cm9, it's ICS and its stable, for it you don't need 1gb ext partition. Well that's it, have fun
Click to expand...
Click to collapse
Thanks ,
i'll try the JaggyRom and tell you how it goes.
If you want to keep your Rom pure stock then flash the one by immortal_yash with ext support. It's smoother then jaggyrom 4.0.3 for me or you can flash cm9.1 build 14 . It's your choice so try and use the one which is best for you...
Sent from my HTC Explorer A310e using xda app-developers app
Hi,
I have installed the JaggyRom 4.0.3 as of now (will try ICS, next after a while) . What i wanted to know if what next can i do with my phone?
I had created a ext4 partition , but can't see it now. Should i install link2SD ?
Also can i overclock my mobile (rather should i do it ? ) and also can the internal memory be used as RAM
Sorry the questions are pretty novice but then i am one
Thanks for all the help.
Hi,
I have installed the ROM , it worked fine for a while , now it keeps restarting every few minutes ..
I have no clue what to do
Just following instructions , understanding nothing is killing me
AlbusDumbelodr said:
Hi,
I have installed the JaggyRom 4.0.3 as of now (will try ICS, next after a while) . What i wanted to know if what next can i do with my phone?
I had created a ext4 partition , but can't see it now. Should i install link2SD ?
Also can i overclock my mobile (rather should i do it ? ) and also can the internal memory be used as RAM
Sorry the questions are pretty novice but then i am one
Thanks for all the help.
Click to expand...
Click to collapse
1. Make ext3 partition
2. Do not overclock... you can /rather will cause permanent damage
3.you don't need to use internal memory as ram ~if you do, it may reduce life of SD card
AlbusDumbelodr said:
Hi,
I have installed the ROM , it worked fine for a while , now it keeps restarting every few minutes ..
I have no clue what to do
Just following instructions , understanding nothing is killing me
Click to expand...
Click to collapse
Go to recovery
Wipe cache and dalvik
Fix permissions
Reboot
Wait
cm9 htc a310e
ptcpayme said:
1. Make ext3 partition
2. Do not overclock... you can /rather will cause permanent damage
3.you don't need to use internal memory as ram ~if you do, it may reduce life of SD card
Go to recovery
Wipe cache and dalvik
Fix permissions
Reboot
Wait
cm9 htc a310e
Click to expand...
Click to collapse
Hi,
Thanks for the reply.
What i observed was that the phone started restarting after i had run the following command (to enable ext4 to be used as part of internal memory):
Code:
su
m2sd rmount enable
so i again ran
Code:
su
m2sd rmount disable
after which it stopped restarting. Any pointers what could be the reason for this ? I have a 2GB card, not sure which class , but since it came with the phone i believe it should be class 2 or class 4
Type in terminal emulatur 'm2sd status'
It will show what is enabled, answers will come.
And did you used superwipe.zip, or manually wiped everything. And normally it's better ext partition to be ext2 or ext3.
AlbusDumbelodr said:
Hi,
I have installed the ROM , it worked fine for a while , now it keeps restarting every few minutes ..
I have no clue what to do
Just following instructions , understanding nothing is killing me
Click to expand...
Click to collapse
Well have you removed the sd card while the phone was on?.....If thats the case then you may have to reflash the rom....
Also download roms from xda itself because it is posted by the original devs themselves and you get better support.
Consider using jaggy 4.1 by me....
http://forum.xda-developers.com/showthread.php?t=1930175
shortyoko said:
Type in terminal emulatur 'm2sd status'
It will show what is enabled, answers will come.
And did you used superwipe.zip, or manually wiped everything. And normally it's better ext partition to be ext2 or ext3.
Click to expand...
Click to collapse
This is what i get :
Status
----
* Mounts2SD [loaded]
- Apps [loaded]
- Data []
- Dalvik[loaded]
- CmDalvik[]
- Cache[]
- Swap []
- Rmount[]
Device info :
* SD-EXT device [/dev/block/mmcblk0p2]
* Swap device[]
Locations :
* Cache[]
I used superwipe.zip
What do you suggest i do next ?
Thanks.
abhinavthms said:
Well have you removed the sd card while the phone was on?.....If thats the case then you may have to reflash the rom....
Also download roms from xda itself because it is posted by the original devs themselves and you get better support.
Consider using jaggy 4.1 by me....
http://forum.xda-developers.com/showthread.php?t=1930175
Click to expand...
Click to collapse
No i did not.
After i ran this
Code:
m2sd rmount disable
the phone stopped restarting.
Okies , i'll try jaggy 4.1 ,
but are there any limitations of the memory card that i have to take care of ?
And will i loose the data again ?
Thanks.
Edit : Not sure if its releavant, but i can't connect to the memory card by using the "Disk Mode" from the mobile.
Can someone shed some light on the differences between JaggyRom and cm ??
AlbusDumbelodr said:
Hi,
I have installed the ROM , it worked fine for a while , now it keeps restarting every few minutes ..
I have no clue what to do
Just following instructions , understanding nothing is killing me
Click to expand...
Click to collapse
flash new recovery http://forum.xda-developers.com/showthread.php?t=2168725
i recommend the 1 above
try cyanogenmod 10 or 9 whatever you want
flash proper gapps
if you want to increase internal memory go here -> http://forum.xda-developers.com/showthread.php?t=1932874
------------------------------------------------------------------------------------------------------------------------------------------------------------
Dont forget to hit thanks !!!
The1sameer said:
flash new recovery http://forum.xda-developers.com/showthread.php?t=2168725
i recommend the 1 above
try cyanogenmod 10 or 9 whatever you want
flash proper gapps
if you want to increase internal memory go here -> http://forum.xda-developers.com/showthread.php?t=1932874
------------------------------------------------------------------------------------------------------------------------------------------------------------
Dont forget to hit thanks !!!
Click to expand...
Click to collapse
I am thinking of installing this (TWRP) :
http://forum.xda-developers.com/showthread.php?t=1911242
I am currently on CMW-Based Recovery v5.0.2
AlbusDumbelodr said:
I am thinking of installing this (TWRP) :
http://forum.xda-developers.com/showthread.php?t=1911242
I am currently on CMW-Based Recovery v5.0.2
Click to expand...
Click to collapse
Yeah even i m using twrp :thumbup:
----------------------------
There is a Thanks button
and
it is meant to be clicked
Hello
I have rooted my HTA Explorer and it was working fine then i flash custom rom MIUI then after i flash Cyanogenmod 9 build of 2012, it was also working good then i install stock rom just to check if i want to go back it was also working fine then i flash cyanogenmod 9 build 14 then it starts giving error like camera not loaded , cannot start calander etc.
I again flashed many roms randomly but my internal memory is only 23 mb left, I have checked through diskusage it says system data is 100 mb but there is no application installed.
I always wipe factory data reset and wipe cache partition before flashing new rom, i have also tried format data ,cache from mounts and storage but still i got only 23 mb available after flashing.
Now i am at my original backup of stock rom and if i flash cyanogenmod 9 it gives me error due to low internal memory.
I gues there is any old rom's data is still placed in my internal memory which needs to be wiped off, Please help me in this.
I have now use superwipe and installed cynogenmod 9 now it shows total space 150mn apps 26.99 and available 56.66 where is the rest 64.35mb ????
MODS
please help me out this .... if this is not th right place to ask then kindly move the thread to where it can be answered.
Wipe everything except sdcard
Then flash rom
Sent from my HTC Explorer A310e using xda premium
Hpsgill said:
Wipe everything except sdcard
Then flash rom
Sent from my HTC Explorer A310e using xda premium
Click to expand...
Click to collapse
Yes i did it but prob remains the same
I wipe data/ factory reset it and then flash rom it doesnt clear internal storage
which rom u tried??
Hpsgill said:
which rom u tried??
Click to expand...
Click to collapse
Cyanogenmod 9
Miui
Asian stock rom
Tried everyrom
Previously it was working fine but from last 2 days its internal storage was eaten up
Guys plz help me
Wipe Data/Factory Reset + Wipe Cache + Wipe Dalvik Cache and then try.
Can you specifically tell us which build? Some may have overclocked cpu and u may have a burnt NAND.
Same problem
I have the same problem.,,,i kept trying different roms... i did all d correct steps... wiped dalvik cache,wipe system,wipe boot,wipe cache, then too not able to clear data fully..
even after clearing data my data is fulled upto 136 mb... now i am not able to install any rom.... just using jaggy rom 4.1 with reverse mounting it..
Anyone has any perfect solutions... that how to hard reset ut phone....
y dont u partition ur sd card n use memory scripts? ..
I am using galaxy s4 gt i9500. The internal memory available for the 16gb variant is about 8 gb, out of which i have hardly used 1 gb. I don't know where the rest of the memory has gone. Is it possible to format or something(except the factory reset; it didn't help) like we can format the sd card. Any help is appreciated!
Thanks a lot!
daksh.mehta235 said:
I am using galaxy s4 gt i9500. The internal memory available for the 16gb variant is about 8 gb, out of which i have hardly used 1 gb. I don't know where the rest of the memory has gone. Is it possible to format or something(except the factory reset; it didn't help) like we can format the sd card. Any help is appreciated!
Thanks a lot!
Click to expand...
Click to collapse
A large amont of the space is your rom im guessing around 3-5gb then u have probly another 2-3gb for ur stock apps then anything u install after that. They say 16/32/64 or 128 on the box but thats never the room u get software always takes up a large portion. Luckily ur device has a sd card slot i believe so u can use that to expande ur storge for a relatively cheap price.
If you need more room on the device you can always root and install custom software or uninstall apps with titanium backup but be careful read the guides in your device forum and follow them properly.
Root your phone and install link2sd.this will solve your storage problem.
First of all your rom will take a lot, second of all your apps and your old apps data incase you used a custom recovery to factory reset, and third of all Cashe it self could reach up to 1 gb.
MrHollywood said:
First of all your rom will take a lot, second of all your apps and your old apps data incase you used a custom recovery to factory reset, and third of all Cashe it self could reach up to 1 gb.
Click to expand...
Click to collapse
I understand that the rom may take a large amount of memory but i dont think so that it can take upto 7-8 gb. I have cleared all the cache so it cannot be cache either. I think i may have used custom recovery to factory reset. But when i use file manager to view my internal the total is around only 400 mb including all the folders (like android, dcim, etc)
Btw, I'm running cm12.1. Do you think reverting back to my stock rom would help?
Please help as this is really irritating because most of my apps crash due to low memory.
Thanks.
daksh.mehta235 said:
I understand that the rom may take a large amount of memory but i dont think so that it can take upto 7-8 gb. I have cleared all the cache so it cannot be cache either. I think i may have used custom recovery to factory reset. But when i use file manager to view my internal the total is around only 400 mb including all the folders (like android, dcim, etc)
Btw, I'm running cm12.1. Do you think reverting back to my stock rom would help?
Please help as this is really irritating because most of my apps crash due to low memory.
Thanks.
Click to expand...
Click to collapse
Yup the issue is that you used a costume recovery to factory reset, I had that issue as well with my note 3 until I realized that all apps data were installed but I didn't see them even on file manager, so I just downloaded a stock firmware and did a stock factory reset and then everything was good as new!
MrHollywood said:
Yup the issue is that you used a costume recovery to factory reset, I had that issue as well with my note 3 until I realized that all apps data were installed but I didn't see them even on file manager, so I just downloaded a stock firmware and did a stock factory reset and then everything was good as new!
Click to expand...
Click to collapse
Will try this and let you know. Thanks a lot!
daksh.mehta235 said:
Will try this and let you know. Thanks a lot!
Click to expand...
Click to collapse
My pleasure! Best of luck.