Need help with UNLOCKing BOOTLOADER - Motorola Photon Q 4G LTE

Need help with UNLOCKing BOOTLOADER - Motorola Photon Q 4G LTE

Man....I just follow the steps on the official web site.
1...Put your device in fastboot mode (press the power button and volume down button at the same time and connect your device to your computer with a USB cable).
2...On your computer, open a command prompt or Terminal session.
3...Go to the Directory where you installed the Android SDK tools, and type:
$ fastboot oem get_unlock_data
4...This fastboot command will return a character string. This is the Device ID which you will be using to generate your unique unlock key.
just stuck at the step 3...i opened cmd ,and test" fastboot oem get_unlock_data".then it shows "waiting for device"..just cant get it done.. can anyone explain it more in detail ......thx...... im a chinese... finding information in a English website is a little challenging. so i just post it. if anyone ask this already ,then just sry....

Check and make sure your device is connected. It shouldn't take much time. Look at the first picture in this. Your phone should say "Transfer Mode: USB Connected". When you type in "fastboot oem get_unlock_data" it should look like the second picture in that same article.

Solust said:
Check and make sure your device is connected. It shouldn't take much time. Look at the first picture in this. Your phone should say "Transfer Mode: USB Connected". When you type in "fastboot oem get_unlock_data" it should look like the second picture in that same article.
Click to expand...
Click to collapse
i get in to AP fastboot menu , it said USB connected . then i just dont know wat to do next...

Did you install drivers?

Skrilax_CZ said:
Did you install drivers?
Click to expand...
Click to collapse
Yes ,of course . And i just followed the steps one by one. The phone said its connected. But the computer can't find the device

Trueloveice said:
Yes ,of course . And i just followed the steps one by one. The phone said its connected. But the computer can't find the device
Click to expand...
Click to collapse
Are you using Linux or Windows on your computer?

xaelith said:
Are you using Linux or Windows on your computer?
Click to expand...
Click to collapse
Im using windows . could it be the fastboot.exe that i downloaded is wrong?

if you're using the regular cmd, you're doing it wrong
when you're in the 'platform-tools' folder, hold shift and right click, in the menu click open command prompt window here

Trueloveice said:
Im using windows . could it be the fastboot.exe that i downloaded is wrong?
Click to expand...
Click to collapse
It would depend on where you downloaded the fastboot.exe from. However, if you are following the Droid-Life instructions (here), then that should be the correct program.
EDIT: I remembered that two settings on the phone need to be changed, as well. I had the same problem until I changed these options.
1. Turn USB Debugging on. (Go to Settings > Developer options, and make sure the box next to USB debugging is checked)
2. USB connection type must be MTP. (Settings > Storage > Menu (three boxes in a vertical line) > USB computer connection > and select the box next to MTP) Unless the setting has been changed, this one should be on by default.
Hope this helps.

xLoveHateLegend said:
if you're using the regular cmd, you're doing it wrong
when you're in the 'platform-tools' folder, hold shift and right click, in the menu click open command prompt window here
Click to expand...
Click to collapse
it's done , it's because of the fastboot.exe is wrong. i downloaded another one.

xaelith said:
It would depend on where you downloaded the fastboot.exe from. However, if you are following the Droid-Life instructions (here), then that should be the correct program.
EDIT: I remembered that two settings on the phone need to be changed, as well. I had the same problem until I changed these options.
1. Turn USB Debugging on. (Go to Settings > Developer options, and make sure the box next to USB debugging is checked)
2. USB connection type must be MTP. (Settings > Storage > Menu (three boxes in a vertical line) > USB computer connection > and select the box next to MTP) Unless the setting has been changed, this one should be on by default.
Hope this helps.
Click to expand...
Click to collapse
it's done , it's because of the fastboot.exe is wrong. i downloaded another one.

Related

fastboot questions

I come from the world of Windows Mobile and have just recetly delved into hacking my G1. While I've had no problems installing jesusfreke's images or themes...I'm struggling with how to get fastboot to work.
Perhaps someone can give me some guidance. Anyone willing to give me some simple step by step instructions. I've searched for this and i think I have everything i need, but I'm unable to get to a point where I can type in commands. when i try to run adb, it open very briefly and closes.
What am i doing wrong?
Thanks,
Jason

Go to start -> run -> type in CMD
Navigate to the folder where adb is located.
Then type in adb devices to see if it finds ur device.
If not then make sure you have it plugged in and USB debugging is turned on in the phones settings under Development.
Also download the usb drivers/or the whole SDK if you havent yet.

nosaj13 said:
when i try to run adb, it open very briefly and closes.
Click to expand...
Click to collapse
If you try to execute a text mode executable in windows, it will close the terminal window as soon as the program finishes. If you run adb without any arguments, it will print the arguments out terminate. I could say the solution is to open run as and type cmd, but the true answer is to install Linux

nosaj13 said:
I come from the world of Windows Mobile and have just recetly delved into hacking my G1. While I've had no problems installing jesusfreke's images or themes...I'm struggling with how to get fastboot to work.
Perhaps someone can give me some guidance. Anyone willing to give me some simple step by step instructions. I've searched for this and i think I have everything i need, but I'm unable to get to a point where I can type in commands. when i try to run adb, it open very briefly and closes.
What am i doing wrong?
Thanks,
Jason
Click to expand...
Click to collapse
1. Download this
2. Extract the contents of the fastboot directory to the root of your C drive.
3. Go Start -> Run -> type 'cmd' (no quotes) and hit enter
4. Type 'c:' (no quotes) and hit enter
5. With your phone plugged in, you should be able to type 'adb devices' and it should return your phones serial number, which is usually in HTXXXXXXXX format. If it does not, make sure debugging is enabled on your phone and you have the adb drivers installed.
6. type 'adb shell reboot bootloader' and hit enter. The screen on your phone will go blank for a second and then you should be in the SPL with the skating androids. Make sure you see "FASTBOOT" at the bottom of the screen.
7. type 'fastboot devices' and hit enter. If you see your phone's serial number again, you have successfully established a fastboot connection with the phone and can run commands such as:
fastboot erase <partition> (erases the given partition)
fastboot flash <partition> <file.img> (overwrites and flashes given partition with given file. This is how one would restore from a nandroid backup)
fastboot reboot (reboots the device into user mode)
Hope that helps. Have fun

when i type adp devices i get an error that says "adp is not recognized as an internal or external command, operable program, or batch file"
what am i doing wrong?

nosaj13 said:
when i type adp devices i get an error that says "adp is not recognized as an internal or external command, operable program, or batch file"
what am i doing wrong?
Click to expand...
Click to collapse
First, the command is adb devices not adp. Second, make sure you copied the contents of the fastboot directory to the C drive. Third, make sure you that when you type 'c:' into the command line, the command prompt actually changes to "C:\>"

Datruesurfer said:
1. Download this
2. Extract the contents of the fastboot directory to the root of your C drive.
3. Go Start -> Run -> type 'cmd' (no quotes) and hit enter
4. Type 'c:' (no quotes) and hit enter
5. With your phone plugged in, you should be able to type 'adb devices' and it should return your phones serial number, which is usually in HTXXXXXXXX format. If it does not, make sure debugging is enabled on your phone and you have the adb drivers installed.
6. type 'adb shell reboot bootloader' and hit enter. The screen on your phone will go blank for a second and then you should be in the SPL with the skating androids. Make sure you see "FASTBOOT" at the bottom of the screen.
7. type 'fastboot devices' and hit enter. If you see your phone's serial number again, you have successfully established a fastboot connection with the phone and can run commands such as:
fastboot erase <partition> (erases the given partition)
fastboot flash <partition> <file.img> (overwrites and flashes given partition with given file. This is how one would restore from a nandroid backup)
fastboot reboot (reboots the device into user mode)
Hope that helps. Have fun
Click to expand...
Click to collapse
i did all the above steps with no problem at all till i got to number 7. when i typed in fastboot devices it just goes to the next prompt without my phone showing up.
If i plug in my g1 in normal mode i see it at the top under adb and in the usb section as a mass storage device.
In bootloader mode with fastboot on the screen it doesnt show up anywhere in the device manager.
Also when i follow the above quoted steps and type in the "adb shell reboot bootloader" and hit enter i hear the ding you hear when you unplug a usb device, and all instances of the phone then leave the device manager.
i have also uninstalled and reinstalled all drivers for the phone and all drivers that have to do with the usb ports on my win xp machine.
Anyone have any ideas i could try?

I think you need this program. I put it on my desktop, then just ran cmd, directed to it, and type in fastboot.

I7oobie said:
I think you need this program. I put it on my desktop, then just ran cmd, directed to it, and type in fastboot.
Click to expand...
Click to collapse
thats not it. i have that in the sys 32 folder and also on desktop

Fastboot mode not recognized
I'm having the same problem. I've installed all the correct drivers and in normal mode, I see the Android Composite Device (or something similar) in Device Manager.
As soon as I go into SPL mode (the 3 skateboarding androids screen), the device does not show up.
Anyone have any ideas? Thanks!

Datruesurfer said:
First, the command is adb devices not adp. Second, make sure you copied the contents of the fastboot directory to the C drive. Third, make sure you that when you type 'c:' into the command line, the command prompt actually changes to "C:\>"
Click to expand...
Click to collapse
When I'm in the Command Prompt and I type C:, the directory still reads C:\Documents and Setting\Reids. It won't change to only C:

Hi,
You have to do this to get back to c:
cd\
press enter
That should do it.

bestwebs said:
Hi,
You have to do this to get back to c:
cd\
press enter
That should do it.
Click to expand...
Click to collapse
Ok, thanks a lot. Got it working now.

I need help trying to flash my cupcake images that I have stored in my fastboot folder. I attached the pictures below. I will accept any help I can get.

EDIT: Doh, I thought I was in another topic.
My bad.

Are adb & adb's dll files located inside the same folder as fastboot??? They are suppose too be.
Is your usb cord directly plugged into your system or thru a hub??
Your phone, i bet is under usb mass....to check, expand your device manager window.
Expand your USB-Mass storage list.
With your phone in fastboot mode, click on the camera key and the back key. With enough time inbetween for your system to recognize that there might be a device hooked up.
Notice any change in the list??

Anyone wanting good instructions
http://androidcommunity.com/forums/f28/nandroid-v2-0-full-nand-backup-and-restore-tool-9336/
Read post 2 and go!

this seems like the most easiest thing to do but i still cant get it to work
i have downloaded everything needed and see ADB Interface on my device manager with a yellow mark on it when i try to update the dirver it fails and i got the drivers and point them to it but seems not to work
my phone is on the fastboot screen with the android skateboards guys
i dont know whats going on if someone know what am also doing wrong can tell me please...
This is what i get

[Q] Windows drivers for Nabi2

I've read a couple dozen of the pages from http://forum.xda-developers.com/showthread.php?t=1905674&page=95 titled
Nabi2 root and Gapps install
Click to expand...
Click to collapse
.
Using Win7 x64. Nabi2 version: 1.9.37 recently updated.
Can't post to above thread because this is my first post (restricted to "General" forums).
In "Jmz Nabi Recovery Installer" window it is always stuck in the "If stuck here drivers are not installed" step.
Prior to installing "PdaNet for Android" from http://junefabrics.com/index.php,
I had 2 devices in Control Panel under "Other devices" with a yellow '!'. One of the looked like the Nabi device. The other is named "MTP".
After installing PdaNet, only MTP remains with the yellow exclamation point.
What should the Nabi look like in the Control Panel if its properly configured with a driver and where would it be?
And what is MTP?
Apparently I'm still having a driver/connection problem from adb.
USB Debugging is on in the Nabi.

Put the nabi in 'fastboot' mode
Open a CMD Prompt and browse to the 'files' folder within 'jmzrootpackage'
Then type:
adb.exe
fastboot devices
It should return a value (fastboot working and drivers are installed)
Let me know how it goes.

Put the nabi in 'fastboot' mode
Open a CMD Prompt and browse to the 'files' folder within 'jmzrootpackage'
Then type:
adb.exe
Click to expand...
Click to collapse
Part of this command is missing right? Without input parms it just outputs the "uses" message.
fastboot devices
Click to expand...
Click to collapse
Unfortunately this returned nothing for me.
I'm glad you responded. Other suggestions?

Here is how i done it using Windows 8 x64
I done 3 nabi2's this way but had a lot of trouble first so here is what worked for me:
Sadly, i don't have any nabi2 with me now to explain exactly how i done it
1) First boot the Nabi2 normally and turn off usb debugging.
2) When fully booted connect USB cable.
3) Check device manager and drivers should be installed.
4) Unplug USB cable and turn on USB Debugging and Unknown Sources.
5) Reconnect USB Cable.
6) Drivers should install.
7) Install PDA Net on Laptop/PC
8) Select Samsung device from option screen when installing.
9) Wait for install to complete and drivers to install
10) Shut down Nabi2
11) Boot Nabi in fastboot (Hold + and Power buttons)
12) Select fastboot protocol
13) Here i seen Windows 8 take about 60 seconds installing fastboot drivers
To make sure fastboot drivers are installed i went to this thread
Code:
http://forum.xda-developers.com/showthread.php?t=1590800
and download ADB (save it to C:\SDK\platform-tools) and read over the helpful instructions in the thread.
Open command Prompt
Type the following (shown in RED) in the CMD window the opened:
cd\
cd C:\SDK\platform-tools
adb.exe (a list of options should be listed)
fastboot devices (it should list a number after you enter this)
If number displayed then you are good to go.
Reboot Nabi2 and wait to complete
Go to the location you saved jmzrootpackage
Go to files folder inside jmzrootpackage
Double click install.bat
Follow on screen prompts ( I took option 1)
TWRP recovery installs
I had trouble installing GAPPS.zip with an error being displayed about unable to mount /data
I copied GAPPS.zip to a SD Card and inserted to Nabi2
i install zip from EXT-SD Card even though it gives a load of errors about not able to mount /data
Wipe Cache/Dalvik
Reboot Nabi2
Go to daddy/mommy mode and you should have Google Apps installed.
Any problems let me know.

I'm using Windows 7 x64.
Your instructions with selecting "Samsung" for PdaNet install appears
to have done something right. So maybe I'm a little closer.
It completed the PdaNet install successfully and when I reconnect the
Nabi I see a message popup on Windows saying PdaNet connected something.
(It was too quick.)
So maybe I'm not doing the "Fastboot" portion correctly.
On Nabi hold <Power> and <Vol+> down at same time to turn it on.
Resulting Menu:
Boot Normally
Fastboot Protocol
Recovery Kernel
Forced Recovery
Use <Vol-> to move the selected item.
Moved selected item down to "Fastboot Protocol".
Use <Vol+> to "enter" selected item.
New Menu:
Bootloader
Continue
Reboot-bootloader
Reboot
Poweroff
Selected "Continue", and entered(<Vol+>).
At this point the Nabi boots up.
On PC in adminstrator mode for command window and with ALL anti-virus
security turned off:
> adb.exe kill-server
> adb.exe start-server
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
> fastboot.exe devices
Nothing. (sigh)

After looking at Victoria Antonio's youtube of this process I'm convinced the driver install is still not correct.
Somehow it gets mucked up when I use PdaNet. Not sure how or why.
To make this picture clearer I posted some screen shots on my website: http <colon, 2 forward slashes>skippyvondrake.com
I hope someone can tell me how to unmuck what I've mucked.

skippyV said:
Selected "Continue", and entered(<Vol+>).)
Click to expand...
Click to collapse
Don't press Continue on the Nabi after selecting fastboot protocol
After selecting fastboot protocol leave it.
skippyV said:
> fastboot.exe devices
Click to expand...
Click to collapse
The command is:
fastboot devices
not
fastboot.exe devices

Thanks for telling me about when I'm in fastboot mode.
I DO get a device number when in fastboot mode and from 'fastboot devices'
But adb still cannot "see" the device. All commands using adb result in:
error: device not found
Regardless of what mode the Nabi is in.

SOLVED
I finally decided to try this with a different computer. Same OS and architecture.
But this computer didn't have various android development "kits" installed previously.
And it worked without a hitch.
The youtube by Victoria Antonio pointed out a few nuances I didn't know.
And you helped too, BBKGTTDi, so giving you "thank you" points.
Chow!

Glad you got it work SkippyV
I just need to figure out now, when i download a game to the Nabi2 from the playstore, how to get it so show in the kids mode

BBKGTTDi said:
Glad you got it work SkippyV
I just need to figure out now, when i download a game to the Nabi2 from the playstore, how to get it so show in the kids mode
Click to expand...
Click to collapse
When I get there - if I figure it out - I'll send you a private email sense that would be a different "thread'. There are other nuances I've noticed too...

show game in Nabi mode after rooting
@BBKGTTDi, I thought there would be a way to send private messages/emails on this forum - but I don't see it.
I ran into the same problem after rooting the Nabi. The "Add Apps" app doesn't work as its supposed to.
It worked prior to rooting.
It does list the newly installed apps, but selecting them for Nabi-Mode, rebooting, and they aren't there.
Only visible in Mommy/Daddy mode.
So if you figure it out please let me know!

The "Add Apps" app is working correctly now. Don't know what happened before.
I must be getting "Nabi-ed out".
Let me know if you're still having troubles.

skippyV said:
I'm using Windows 7 x64.
Your instructions with selecting "Samsung" for PdaNet install appears
to have done something right. So maybe I'm a little closer.
It completed the PdaNet install successfully and when I reconnect the
Nabi I see a message popup on Windows saying PdaNet connected something.
(It was too quick.)
So maybe I'm not doing the "Fastboot" portion correctly.
On Nabi hold <Power> and <Vol+> down at same time to turn it on.
Resulting Menu:
Boot Normally
Fastboot Protocol
Recovery Kernel
Forced Recovery
Use <Vol-> to move the selected item.
Moved selected item down to "Fastboot Protocol".
Use <Vol+> to "enter" selected item.
New Menu:
Bootloader
Continue
Reboot-bootloader
Reboot
Poweroff
Selected "Continue", and entered(<Vol+>).
At this point the Nabi boots up.
On PC in adminstrator mode for command window and with ALL anti-virus
security turned off:
> adb.exe kill-server
> adb.exe start-server
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
> fastboot.exe devices
Nothing. (sigh)
Click to expand...
Click to collapse
I ve got the same problem using windows xp, 7 or 8.1 after OTA update to jellybean.
Any ideas of what is going on?

arvati said:
I ve got the same problem using windows xp, 7 or 8.1 after OTA update to jellybean.
Any ideas of what is going on?
Click to expand...
Click to collapse
I did have those problems last year. Still think they were driver related.
I use mehtuus's package now. He has a useful install script.
http://forum.xda-developers.com/showthread.php?t=2172843
And when I want to use adb in "manual" mode I just launch a command prompt from his
'adb' directory (package is named 'mn2ri-v1.5.0-beta2.zip').
Try playing with his installer. And see if anything is displayed using:
Code:
adb devices

Thanks skippyV. I got it in fastboot last week with ubuntu and installed TWRP sucessfully.

ATTN: Backup your boot0 block today

ATTENTION: PUBLIC SERVICE ANNOUNCEMENT
It has come to my attention that under certain circumstances when the Kindle HD's get stuck in a bootloader bootloop the information on the "boot0" block of the internal storage can be ERASED and RESET.
This partition is special and contains ALL of your device's hardware specific information:
- Wifi MAC address + Encoded Secret for registering w/ Amazon services
- BT MAC address
- Serial #
etc
FOR BACKING UP THIS PARTITION:
Code:
adb shell su -c "dd if=/dev/block/mmcblk0boot0 of=/sdcard/boot0block.img"
adb pull /sdcard/boot0block.img
Place the "boot0block.img" file with the other files that you backed up in the original instructions for safe keeping.
FOR RESTORING THIS PARTITION:
(do not do this unless you are absolutely SURE that your boot0 block got wiped out -- hopefully you never need to)
This is done via adb from your PC while the device is in TWRP recovery or in the Android OS (not fastboot):
Code:
cd <your safekeeping files>
adb push boot0block /sdcard/boot0block.img
adb shell "echo 0 > /sys/block/mmcblk0boot0/force_ro; dd if=/sdcard/boot0block.img of=/dev/block/mmcblk0boot0;"
THIS FILE IS UNIQUE TO YOUR DEVICE AND CANNOT BE REPLACED OR REBUILT FROM ANOTHER DEVICE. DO NOT SHARE IT WITH ANYONE AS IT CONTAINS INFORMATION ABOUT YOUR DEVICE USED BY AMAZON DURING REGISTRATION.

very interesting Hashcode,thanks for the information :good:

Odd, I can't seem to find the file after I pulled it with ADB.
EDIT: I didn't even assign the command an output location to begin with. LOL.

Thanks for the info.
How can I access KFHD via ADB if CM10.1 installed.
I can't see my device in device manager only as a media storage or sth like that.
Should I remove KFHD adb driver and install the google driver?
Or just using the hidden trick in cm10.1?
"Enable Developer options in your phone (Settings > About phone and tap Build Number until you are a developer (about 7 times)
Set root access for APPS and ADB in: Settings > Developer Options > Root Access
Enable Android debugging at the same page (Developer Options). Enable ADB over network if you need.
Check if your Settings > Security > Unknown Sources is checked. you will need it to install over ADB."
Yeah...it helped

esox_hu said:
Thanks for the info.
How can I access KFHD via ADB if CM10.1 installed.
I can't see my device in device manager only as a media storage or sth like that.
Should I remove KFHD adb driver and install the google driver?
Or just using the hidden trick in cm10.1?
"Enable Developer options in your phone (Settings > About phone and tap Build Number until you are a developer (about 7 times)
Set root access for APPS and ADB in: Settings > Developer Options > Root Access
Enable Android debugging at the same page (Developer Options). Enable ADB over network if you need.
Check if your Settings > Security > Unknown Sources is checked. you will need it to install over ADB."
Yeah...it helped
Click to expand...
Click to collapse
Just turn on ADB debugging on the tablet, and plug it into the computer. On the computer, open command prompt, use the command "adb devices" to see if your ADB is working.
Other than that, I don't know what happened in your post.

Ok i really can't figure this one out, I used adb many times while testing KFFAide tool so I am 100% sure my adb drivers are installed correctly, But since i switched to cm10.1 (Thanks hashcode) ADB cannot recognize my device anymore, I have enabled ADB on my KFHD and when i connect it to my pc a small notification appears "Android debugging enabled" but when i use "adb devices" command nothing shows up!
Can anyone help me with this i'm completely lost here!

AmrBanawan said:
Ok i really can't figure this one out, I used adb many times while testing KFFAide tool so I am 100% sure my adb drivers are installed correctly, But since i switched to cm10.1 (Thanks hashcode) ADB cannot recognize my device anymore, I have enabled ADB on my KFHD and when i connect it to my pc a small notification appears "Android debugging enabled" but when i use "adb devices" command nothing shows up!
Can anyone help me with this i'm completely lost here!
Click to expand...
Click to collapse
Leave the device plugged in, go to Developer Setting and uncheck ADB debugging, then check it again. You should see a prompt, select OK for both.

seokhun said:
Leave the device plugged in, go to Developer Setting and uncheck ADB debugging, then check it again. You should see a prompt, select OK for both.
Click to expand...
Click to collapse
Ok thanks i tried but to no avail

AmrBanawan said:
Ok thanks i tried but to no avail
Click to expand...
Click to collapse
Yeah I actually have the same problem too now

Thanks for the heads up hash, got it on a usb stick now
---------- Post added at 11:41 PM ---------- Previous post was at 11:39 PM ----------
Protomartyr said:
Yeah I actually have the same problem too now
Click to expand...
Click to collapse
I had to manually check android debugging and usb debugging notify and it worked just fine.... make sure adb over network is not checked

Protomartyr said:
Yeah I actually have the same problem too now
Click to expand...
Click to collapse
AmrBanawan said:
Ok thanks i tried but to no avail
Click to expand...
Click to collapse
Why don't you guys try this, go into CMD while connected with the device (ADB debugging on), and type "adb devices" to start the daemon, then try the commands. Other than that, I don't know what else to do.

seokhun said:
Why don't you guys try this, go into CMD while connected with the device (ADB debugging on), and type "adb devices" to start the daemon, then try the commands. Other than that, I don't know what else to do.
Click to expand...
Click to collapse
Nope. Just get "List of Devices Attached" but no serial number. Checked device manager and it's showing up as a portable device. Probably will reinstall them and see if that solves it.
On a side note:
if we ran these commands in terminal emulator on the device, would that be sufficient?

Protomartyr said:
Nope. Just get "List of Devices Attached" but no serial number. Checked device manager and it's showing up as a portable device. Probably will reinstall them and see if that solves it.
On a side note:
if we ran these commands in terminal emulator on the device, would that be sufficient?
Click to expand...
Click to collapse
Yes
run the first command then pull it manually
But we need to know what's going on, i will need adb sometime soon when prokennexusa releases the next version of KFFAide

AmrBanawan said:
Yes
run the first command then pull it manually
But we need to know what's going on, i will need adb sometime soon when prokennexusa releases the next version of KFFAide
Click to expand...
Click to collapse
you can always open up your device manager and manually apply the adb drivers to your kindle

How do we know the boot0 partition is erased?
Sent from a Kindle Fire HD running CM10.1 using Tapatalk 2

had same probs on cm10 getting the files no matter what i tried.in windows 7 and xp it wouldnt install normal driver so i could see kindle as a drive so flashed an amazon zip and pc recognizes it without any problems and now have the files needed

dugoy13 said:
How do we know the boot0 partition is erased?
Sent from a Kindle Fire HD running CM10.1 using Tapatalk 2
Click to expand...
Click to collapse
Normally you would notice WiFi doesn't work under any circumstances same for BT. And when on Amazon's software it won't let you register.
Sent from my Amazon Kindle Fire HD using Tapatalk 2

I can't get ADB to find it either, think i'll revert back to stock to get the file then go back to CM - I notice though on CM turning USB Debugging on doesn't change anything in device manager, it still stays connected as a media device or camera, depending on which you have ticked in storage setting *shrugs*
Thank you Hashcode

PaulJCW said:
I can't get ADB to find it either, think i'll revert back to stock to get the file then go back to CM - I notice though on CM turning USB Debugging on doesn't change anything in device manager, it still stays connected as a media device or camera, depending on which you have ticked in storage setting *shrugs*
Thank you Hashcode
Click to expand...
Click to collapse
No don't, just type the command hashcode provided in terminal emulator and you'll find the backup in your sdcard, just copy it to your pc like normal!

You can do it from the terminal without typing ADB. that may be why people are confused. Start with hashcodes command but start with "su -c" in the terminal.
Sent from my Nexus S 4G using xda app-developers app

Diagnosing USB Driver and ADB issues in Windows

Are you getting errors like "device not found" or "device offline" while trying to run ADB commands? Here's a quick way to troubleshoot your problem on Windows.
Steps
1. Ensure USB Debugging is enabled in Developer Options.
2. Verify current Google USB Driver is installed and that Device Manager is using that driver.
3. Update to latest version of ADB.
1. Ensure USB Debugging is enabled in Developer Options.
Enable Developer Options by going to Settings -> About Phone and tapping on "Build Number" multiple repeated times. You will be greeted with "You are a developer."
Now, under Settings -> Developer Options, ensure you check the box for "USB debugging."
2. Verify current Google USB Driver is installed and Device Manager is using that driver.
You may skip this step if Device Manager lists your phone as "Android Phone -> Android Composite ADB Interface." If it does not, this is likely your root cause.
Go to the Google USB Driver page and download the latest driver directly from Google. Extract the zip file to a folder you know and will remember in the future.
Open up Device Manger in Windows with your Nexus 5 connected. Whatever your Nexus 5 is currently detected as, right click on it and select Properties. Then, in the Driver tab, hit "Uninstall." If available, select "Delete the driver software for this device." and hit "OK." It will remove the old drivers.
Restart your computer.
After restarting, reconnect your Nexus 5. It should be recognized as an unknown device in the Device Manager. (If it isn't, try the previous driver deletion steps again.)
Right click on the unknown Nexus 5 device, choose Properties, and in the Driver tab again select "Update driver." Browse your computer manually by putting in the path to the new Google USB Drivers you unzipped to a folder of your choice in the beginning of this step. Choose next and your drivers should install! You'll know everything completed successfully when you see the phone listed under "Android Phone -> Android Composite ADB Interface" in Device Manager.
This is the most finicky process, so don't be afraid to reboot your computer a time or two and repeat these steps if they don't work on the first try.
3. Update to latest version of ADB.
This is a crucial step. The new version of ADB is required to work with the "USB debugging authorizations" setting.
Perhaps you know how to update ADB, in which case, just do it. However, here's a detailed manual approach to download JUST the adb suite from the SDK:
Go to the Google Android SDK website and choose "Use An Existing IDE" and click the "Download the SDK Tools for Windows." This will allow you to download only an 80 MB file rather than the whole 400 MB suite.
Install the SDK tools exe to a folder of your choosing.
Run SDK Manager and uncheck everything except for "Android SDK Platform-tools." This is the ADB and Fastboot bundle. Install that.
Navigate to your SDK Path as indicated at the top of your Android SDK Manager window. You will now see a freshly downloaded platform-tools folder containing ADB.exe, Fastboot.exe, and a host of other files. That folder is now your updated, portable ADB tools folder. You can move it anywhere you like as long as you run ADB from a command prompt window set to that directory.
After you've followed these procedures, running "ADB Devices" should trigger a prompt on your device to accept the RSA fingerprint of your computer. Accept it, and now all should be working as intended!
Questions? Ask below!

Crowd-sourced solutions.
Windows 8 Diagnosis
Yorus said:
The following worked for me, since all of the suggestions mentioned here didn't work for me:
If you use a Windows 8.1 enterprise N or KN edition, install the Microsoft Media Feature Pack :
http://support.microsoft.com/kb/2929699/en
Sounds too simple to be true but work instantly for me.
Hope it works you some of the people here looking for a solution
Click to expand...
Click to collapse
Setting up ADB and Fastboot commands to work from ANY path (credit to original author in quote).
Chromium_ said:
Setup, Preparation and Prerequisites
ADB and Fastboot Installation
Download the full Android SDK here (scroll to the bottom of the page>DOWNLOAD FOR OTHER PLATFORMS>SDK Tools Only) or get a slimmed version containing only the essential components here (Thanks @El Daddy)
Extract the zip and place the android-sdk-windows folder on the root of your hard drive. (the path should be like this: C:\android-sdk-windows)
**If you chose to download the slimmed sdk skip to step 5**
Only if you downloaded the full sdk: Go into the folder and run SDK Manager.exe. Install the following packages (there are a total of 4 packages):
- Tools > Android SDK Tools, Android SDK Platform-tools
- Extras > Android Support Library, Google USB Driver
Only if you downloaded the full sdk: Go back into the android-sdk-windows directory, and you should see a new folder named platform-tools. If not, repeat the step above.
Open a command prompt window and run "sysdm.cpl" (without the quotes) and a new window should popup. Go to the Advanced tab > Environmental Variables
Now focus your attention to the System variables box (the lower box). Scroll down and look for the Path variable > highlight it > click Edit > go all the way to the end of the Variable value text box, and paste the following entry:
Code:
;C:\android-sdk-windows\platform-tools
(OR WHATEVER PLATFORM-TOOLS DIRECTORY YOU PICKED)
Click OK then close all of the System Properties windows
You should now be able to use adb/fastboot commands no matter what location your command prompt is in. To confirm that it is indeed working, open a command prompt window and enter "adb version" (without the quotes). If it displays "Android Debug Bridge version x.x.xx" it is working. If it is gives an error saying that adb is not a recognized command, it has not been successful. Carefully repeat the steps above if this is the case.
Click to expand...
Click to collapse
The importance of being careful with your command choices.
MkVsTheWorld said:
"Be sure to use the CORRECT adb/fastboot commands, double-check the path on all commands, and double-check the existence of each file you are working with."
I hate to admit this, but I couldn't figure out why nothing was appearing in the device list when I did "adb devices", while the phone was in Fastboot. I did everything from A-Z and tore my hair out for 30 minutes until it hit me, my phone's in Fastboot. I've been messing with Android for 3+ years and made a newbie mistake lol.
Click to expand...
Click to collapse
Fixing MTP device not showing up after installing ADB drivers.
dbareis said:
I'm not sure what happened but on my WINDOWS 7 (64 bit) OS I had to modify "%WINDIR%\inf\wpdmtp.inf" as shown here: "http://forum.xda-developers.com/showpost.php?p=37930602&postcount=937". I then uninstall the device and drivers and performed a hardware scan to get it to work. I also added a "...PID_4EE2&MI_01" line but I am not positive that was required.
Hope that helps someone.
Click to expand...
Click to collapse
Whyzor said:
You should also mention what worked for me in post #16 (& confirmed by a few others in other threads). That is to toggle Settings - Storage - USB Connection type from Camera to Mass storage & also the debugging mode on & off.
Click to expand...
Click to collapse
Ashcunak said:
Op might wanna tack this onto the bottom of the main post as a last resort for folks to "start over" and be sure they have no old drivers installed.
http://www.nirsoft.net/utils/usb_devices_view.html
i had to use this program (right click run as admin if permissions are set) to remove EVERY single android related driver in order to get mine working.. turns out i had so many old ones in my system and some i couldn't remove from the device manager, the buttons wouldn't become click able..
Click to expand...
Click to collapse
CrazyIvan said:
I've tried everything and cannot get the authorization prompt to pop up on my Nexus5 so when I run adb devices the phone shows up as "unauthorized". Any suggestions? This is with updated sdk and USB drivers. Device manager shows phone as "Android Phone->Android Composite ADB Interface" and "Portable Device->Nexus 5". Tried toggling between MTP/PTP, USB Debugging on/off, stopping and starting the adb server (latest version 1.0.31).
Thanks in advance!
EDIT: Finally got the ba$tard! Run this for some adb debug logging:
adb kill-server
set ADB_TRACE=all
adb nodaemon server
Go and look back at the output from the start for any errors. In my case it couldn't mkdir in c:\users\administrator, which for me doesn't exist. I changed the Windows environment variable "ANDROID_SDK_HOME" to point to "C:\users\<my account dir>", closed the DOS window, re-ran the commands and I got prompted for the permission on my phone. Yee ha! Now I can fire up hello world with the SDK on my phone. Praise be to Google search for turning up this thread that told me about the debug logging.
Click to expand...
Click to collapse
SonicAngel said:
I just rooted my N5 (using the guide on this forum so I had no other drivers other than Google's SDK) and after unlocking my bootloader windows did not recognize my phone so I couldn't go further. Upon checking device manager I saw something called "AOSP on Hammerhead", a quick online search found a lot of very complicated answers (uninstall all drivers, restart, install adb drivers was one example).
Instead of all that I just right clicked "AOSP on Hammerhead", chose Update Driver, manually choose driver, went to "Android bootloader", chose the default driver from "Google inc" manually and that for some reason worked.
I figured this might help someone since the other solutions I found really were very long.
Click to expand...
Click to collapse
Questions? Ask below!

MaxRabbit said:
Reserved.
Questions? Ask below!
Click to expand...
Click to collapse
Hey man, thanks for the tutorial, I seem to still have trouble with this. Followed all the steps, even reset the device, to no avail. Anyone else having issues?

KTT16 said:
Hey man, thanks for the tutorial, I seem to still have trouble with this. Followed all the steps, even reset the device, to no avail. Anyone else having issues?
Click to expand...
Click to collapse
You're welcome! What shows up in your Device Manager now?

MaxRabbit said:
You're welcome! What shows up in your Device Manager now?
Click to expand...
Click to collapse
Hey thanks for the quick reply! I got it to work finally via: http://forum.xda-developers.com/showthread.php?t=2507905
Great tips and tutorial though..so stoked to have this phone!

KTT16 said:
Hey thanks for the quick reply! I got it to work finally via: http://forum.xda-developers.com/showthread.php?t=2507905
Great tips and tutorial though..so stoked to have this phone!
Click to expand...
Click to collapse
What step exactly did you take that fixed it?

MaxRabbit said:
What step exactly did you take that fixed it?
Click to expand...
Click to collapse
Open a command prompt window and run "sysdm.cpl" (without the quotes) and a new window should popup. Go to the Advanced tab > Environmental Variables
Now focus your attention to the System variables box (the lower box). Scroll down and look for the Path variable > highlight it > click Edit > go all the way to the end of the Variable value text box, and paste the following entry:
Code:
;C:\android-sdk-windows\platform-tools
Click OK then close all of the System Properties windows
You should now be able to use adb/fastboot commands no matter what location your command prompt is in. To confirm that it is indeed working, open a command prompt window and enter "adb version" (without the quotes). If it displays "Android Debug Bridge version x.x.xx" it is working. If it is gives an error saying that adb is not a recognized command, it has not been successful. Carefully repeat the steps above if this is the case.

KTT16 said:
Open a command prompt window and run "sysdm.cpl" (without the quotes) and a new window should popup. Go to the Advanced tab > Environmental Variables
Now focus your attention to the System variables box (the lower box). Scroll down and look for the Path variable > highlight it > click Edit > go all the way to the end of the Variable value text box, and paste the following entry:
Code:
;C:\android-sdk-windows\platform-tools
Click OK then close all of the System Properties windows
You should now be able to use adb/fastboot commands no matter what location your command prompt is in. To confirm that it is indeed working, open a command prompt window and enter "adb version" (without the quotes). If it displays "Android Debug Bridge version x.x.xx" it is working. If it is gives an error saying that adb is not a recognized command, it has not been successful. Carefully repeat the steps above if this is the case.
Click to expand...
Click to collapse
Ahh, your problem with my instructions then were that you weren't running ADB from inside the platform-tools folder

Definitely! I seriously got frustrated for a second and forgot how to read!
Sent from my Nexus 5 using XDA Premium 4 mobile app

Not showing up as removable storage
Hi, maybe you can help me.
Last night I unlocked my N5 using CF-Root, and flashed TWRP using Flashify. However, when I plug my N5 into my home computer it doesn't ever show up under 'My Computer' with other removable storage devices. It is present in the device manager under 'Android Phone -> Google Nexus ADB Interface'.
I've tried restrarting my computer, uninstalling the drivers and reinstalling them. Developer mode is enabled and if I switch from MTP to PTP then is shows up under removable storage, but I only have access to the DCIM folder. Switching back to MTP makes it disappear.
On my work computer it shows up correctly no problem.
My personal computer has had multiple installations of WugFresh Root toolkit and ADB/SDK files for my previous Galaxy Nexus and Nexus 7 but I uninstalled most of that before setting up the N5.
Thanks!

JonnyRock said:
Hi, maybe you can help me.
Last night I unlocked my N5 using CF-Root, and flashed TWRP using Flashify. However, when I plug my N5 into my home computer it doesn't ever show up under 'My Computer' with other removable storage devices. It is present in the device manager under 'Android Phone -> Google Nexus ADB Interface'.
I've tried restrarting my computer, uninstalling the drivers and reinstalling them. Developer mode is enabled and if I switch from MTP to PTP then is shows up under removable storage, but I only have access to the DCIM folder. Switching back to MTP makes it disappear.
On my work computer it shows up correctly no problem.
My personal computer has had multiple installations of WugFresh Root toolkit and ADB/SDK files for my previous Galaxy Nexus and Nexus 7 but I uninstalled most of that before setting up the N5.
Thanks!
Click to expand...
Click to collapse
same issue on my side...I canot use MTP only PTP...I also tryed new drivers from SDK but has not solved the problem
Alex

JonnyRock said:
Hi, maybe you can help me.
Last night I unlocked my N5 using CF-Root, and flashed TWRP using Flashify. However, when I plug my N5 into my home computer it doesn't ever show up under 'My Computer' with other removable storage devices. It is present in the device manager under 'Android Phone -> Google Nexus ADB Interface'.
I've tried restrarting my computer, uninstalling the drivers and reinstalling them. Developer mode is enabled and if I switch from MTP to PTP then is shows up under removable storage, but I only have access to the DCIM folder. Switching back to MTP makes it disappear.
On my work computer it shows up correctly no problem.
My personal computer has had multiple installations of WugFresh Root toolkit and ADB/SDK files for my previous Galaxy Nexus and Nexus 7 but I uninstalled most of that before setting up the N5.
Thanks!
Click to expand...
Click to collapse
This is a really strange problem :-/ what does it show up as when you are in device manager on your work computer?

MaxRabbit said:
This is a really strange problem :-/ what does it show up as when you are in device manager on your work computer?
Click to expand...
Click to collapse
It shows up as a 'Portable Device' -> 'Portable Media Player' (I was thinking it was a 'Device with Removable Storage').
I have full access to the internal file folders here at work.

Here's a suggestion for something to add to the OP.
"Be sure to use the CORRECT adb/fastboot commands, double-check the path on all commands, and double-check the existence of each file you are working with."
I hate to admit this, but I couldn't figure out why nothing was appearing in the device list when I did "adb devices", while the phone was in Fastboot. I did everything from A-Z and tore my hair out for 30 minutes until it hit me, my phone's in Fastboot. I've been messing with Android for 3+ years and made a newbie mistake lol.
Sent from my Nexus 5 using Tapatalk

JonnyRock said:
Hi, maybe you can help me.
Last night I unlocked my N5 using CF-Root, and flashed TWRP using Flashify. However, when I plug my N5 into my home computer it doesn't ever show up under 'My Computer' with other removable storage devices. It is present in the device manager under 'Android Phone -> Google Nexus ADB Interface'.
I've tried restrarting my computer, uninstalling the drivers and reinstalling them. Developer mode is enabled and if I switch from MTP to PTP then is shows up under removable storage, but I only have access to the DCIM folder. Switching back to MTP makes it disappear.
On my work computer it shows up correctly no problem.
My personal computer has had multiple installations of WugFresh Root toolkit and ADB/SDK files for my previous Galaxy Nexus and Nexus 7 but I uninstalled most of that before setting up the N5.
Thanks!
Click to expand...
Click to collapse
I have the same problem and done the same exact things u did. any help?

I'm having no luck with unlocking bootloader of my Nexus 5 today. I've unlocked previous Android devices fine, but this one for some reason it's not detecting it in USB drivers. It shows as Other devices -> Nexus 5 in device manager, but when I select update driver & navigate to the dir where Android SDK/extras/google/usb_driver
Windows was unable to install your Nexus 5
Windows could not find driver software for your device.
I updated the OTA that came right away earlier, maybe this caused the Windows USB drivers to not work match the updated OTA build? Is there a way to ensure that old windows driver is uninstalled? I can only select 'uninstall', but not the 'remove old driver files' some docs mention. Also when I connect my Nexus 4 it's fine, and enabling debugging mode prompts for to allow the security fingerprint of the PC. But this prompt doesn't appear on Nexus 5, not sure if it's supposed to happen AFTER the PC is able to communicate with the N5 or not, which is the step that I'm stuck on. Tried it on another Windows 7 system and same problem.
UPDATE: Well my Nexus 4 worked fine along with adb until a few minutes ago, after toggling the Debugging Mode on the phone, it's not recognized on Windows now either. So definitely think it's a Windows 7 or Google USB Driver issue. Any pointers on how to start over (without reinstalling Windows) would be appreciated.
UPDATE 2: For future reference, I got around my Windows driver issue by going into Nexus - Settings - Storage - USB computer connection, toggle to Camera (PTP) and Media device (MTP), that reinitialized windows to recognize it in Device Manager again. Stupid Windows.

aluxzen said:
same issue on my side...I canot use MTP only PTP...I also tryed new drivers from SDK but has not solved the problem
Alex
Click to expand...
Click to collapse
I'm not sure what happened but on my WINDOWS 7 (64 bit) OS I had to modify "%WINDIR%\inf\wpdmtp.inf" as shown here: "http://forum.xda-developers.com/showpost.php?p=37930602&postcount=937". I then uninstall the device and drivers and performed a hardware scan to get it to work. I also added a "...PID_4EE2&MI_01" line but I am not positive that was required.
Hope that helps someone.

Whyzor said:
UPDATE 2: For future reference, I got around my Windows driver issue by going into Nexus - Settings - Storage - USB computer connection, toggle to Camera (PTP) and Media device (MTP), that reinitialized windows to recognize it in Device Manager again. Stupid Windows.
Click to expand...
Click to collapse
That... Thankyou for that info.
I was able to get ADB to work but was not able to get the device to popup as a storage device. That fixed it. Thanks!

I'm not sure what happened but on my WINDOWS 7 (64 bit) OS I had to modify "%WINDIR%\inf\wpdmtp.inf" as shown here: "http://forum.xda-developers.com/show...&postcount=937".
Click to expand...
Click to collapse
Thanks, that link was really helpful! I struggled with the correct detection before (seems I had some old drivers for my last phone on that windows installation...)

Whyzor said:
I'm having no luck with unlocking bootloader of my Nexus 5 today. I've unlocked previous Android devices fine, but this one for some reason it's not detecting it in USB drivers. It shows as Other devices -> Nexus 5 in device manager, but when I select update driver & navigate to the dir where Android SDK/extras/google/usb_driver
Windows was unable to install your Nexus 5
Windows could not find driver software for your device.
I updated the OTA that came right away earlier, maybe this caused the Windows USB drivers to not work match the updated OTA build? Is there a way to ensure that old windows driver is uninstalled? I can only select 'uninstall', but not the 'remove old driver files' some docs mention. Also when I connect my Nexus 4 it's fine, and enabling debugging mode prompts for to allow the security fingerprint of the PC. But this prompt doesn't appear on Nexus 5, not sure if it's supposed to happen AFTER the PC is able to communicate with the N5 or not, which is the step that I'm stuck on. Tried it on another Windows 7 system and same problem.
UPDATE: Well my Nexus 4 worked fine along with adb until a few minutes ago, after toggling the Debugging Mode on the phone, it's not recognized on Windows now either. So definitely think it's a Windows 7 or Google USB Driver issue. Any pointers on how to start over (without reinstalling Windows) would be appreciated.
UPDATE 2: For future reference, I got around my Windows driver issue by going into Nexus - Settings - Storage - USB computer connection, toggle to Camera (PTP) and Media device (MTP), that reinitialized windows to recognize it in Device Manager again. Stupid Windows.
Click to expand...
Click to collapse
Thank you for sharing your solution.

How can I wipe phone with nonfunctioning screen?

The screen on my Pixel 4a died - google is sending a box to send it back for warranty repair. However, before I send it I want to wipe all the data - it is rooted with Magisk. How do I wipe the data given I can't operate the screen - can't even turn it off.

has it previously been paired with your computer via ADB ?

3mel said:
has it previously been paired with your computer via ADB ?
Click to expand...
Click to collapse
yes - it shows up as a device with adb

nogods said:
yes - it shows up as a device with adb
Click to expand...
Click to collapse
hope this works for ya
Factory reset Android using ADB
I am trying to factory data reset my Oppo Neo 7 (Android 5.1) using ADB shell. Any way I can try and link to ADB shell?
android.stackexchange.com

nogods said:
The screen on my Pixel 4a died - google is sending a box to send it back for warranty repair. However, before I send it I want to wipe all the data - it is rooted with Magisk. How do I wipe the data given I can't operate the screen - can't even turn it off.
Click to expand...
Click to collapse
try flashing the stock rom from adb/fastboot
nogods said:
The screen on my Pixel 4a died - google is sending a box to send it back for warranty repair. However, before I send it I want to wipe all the data - it is rooted with Magisk. How do I wipe the data given I can't operate the screen - can't even turn it off.
Click to expand...
Click to collapse

A hammer does a full wipe in seconds...
This is one reason why you use a SD card as your data drive. Simply pull it, set a new Google password, done.

blackhawk said:
A hammer does a full wipe in seconds...
This is one reason why you use a SD card as your data drive. Simply pull it, set a new Google password, done.
Click to expand...
Click to collapse
the pixel 4a doesn't have an sd card

the ADB devices shows the phone's id with "unauthorized" next to it. All ADB commands return this:
error: device unauthorized.
This adb server's $ADB_VENDOR_KEYS is not set
Try 'adb kill-server' if that seems wrong.
Otherwise check for a confirmation dialog on your device.

maoriboi said:
try flashing the stock rom from adb/fastboot
Click to expand...
Click to collapse
error: device unauthorized.
This adb server's $ADB_VENDOR_KEYS is not set
Try 'adb kill-server' if that seems wrong.
Otherwise check for a confirmation dialog on your device.
\

Just to be clear: can you enter bootloader? If you're in ADB, type: adb reboot bootloader. If not, can you turn the phone off and then hold volume down while plugging the USB cable in?
Then commands will be fastboot erase userdata or fastboot -w

nogods said:
the pixel 4a doesn't have an sd card
Click to expand...
Click to collapse
Yes I know. Keep that in mind next time around as it makes life much easier.
All joking aside, sorry to hear about your issues.

AlexKarimov said:
Just to be clear: can you enter bootloader? If you're in ADB, type: adb reboot bootloader. If not, can you turn the phone off and then hold volume down while plugging the USB cable in?
Then commands will be fastboot erase userdata or fastboot -w
Click to expand...
Click to collapse
Nope - adb devices shows id number and "unauthorized". Any other adb commands return the
error: device unauthorized.
This adb server's $ADB_VENDOR_KEYS is not set

nogods said:
Nope - adb devices shows id number and "unauthorized". Any other adb commands return the
error: device unauthorized.
This adb server's $ADB_VENDOR_KEYS is not set
Click to expand...
Click to collapse
has it previously been paired with your computer via ADB ?
Click to expand...
Click to collapse
yes - it shows up as a device with adb
So it looks like you never authorized it between the phone and the computer. When you enable USB debugging and then plug in a USB cable, a window will pop up with a check box and ask if you want to authorize/trust this device and you mark the box and click yes. I'm guessing you didn't do that? But what about turning it off and starting in fastboot mode. Forget ADB for the time being and start in fastboot mode. If that doesn't work, make sure you have the right drivers and try again. Otherwise, that's all I've got. I'm sorry...

AlexKarimov said:
yes - it shows up as a device with adb
So it looks like you never authorized it between the phone and the computer. When you enable USB debugging and then plug in a USB cable, a window will pop up with a check box and ask if you want to authorize/trust this device and you mark the box and click yes. I'm guessing you didn't do that? But what about turning it off and starting in fastboot mode. Forget ADB for the time being and start in fastboot mode. If that doesn't work, make sure you have the right drivers and try again. Otherwise, that's all I've got. I'm sorry...
Click to expand...
Click to collapse
this phone was rooted on this computer using adb and fastboot. How do I start it in fastboot? The screen is off completely - I can hear the phone because I set a shortcut key for Talkback so I know it is turning on, telling me there is no sim, and then reading my lock screen with my name, phone numbers, and email.

nogods said:
this phone was rooted on this computer using adb and fastboot. How do I start it in fastboot? The screen is off completely - I can hear the phone because I set a shortcut key for Talkback so I know it is turning on, telling me there is no sim, and then reading my lock screen with my name, phone numbers, and email.
Click to expand...
Click to collapse

Thank you for that info. So here is what happens.
1. I shut it down by pressing both power and down volume buttons while attaching it to a charger.
2. I start it in fastboot mode by holding down the down volume button while attaching it to the computer.
3. The computer notification says "preparing pixel 4a" and I heard the classic connected sound.
4. If I try "adb devices" I get back an empty list of devices (unlike when I just connected it without holding down the down volume button, so I think that means it is NOT in adb mode, right?)
5. But if I try "fastboot device" or any other fastboot command it merely says "waiting for any device"

nogods said:
Thank you for that info. So here is what happens.
1. I shut it down by pressing both power and down volume buttons while attaching it to a charger.
2. I start it in fastboot mode by holding down the down volume button while attaching it to the computer.
3. The computer notification says "preparing pixel 4a" and I heard the classic connected sound.
4. If I try "adb devices" I get back an empty list of devices (unlike when I just connected it without holding down the down volume button, so I think that means it is NOT in adb mode, right?)
5. But if I try "fastboot device" or any other fastboot command it merely says "waiting for any device"
Click to expand...
Click to collapse
That sounds like a driver issue. It's a different driver for each state the phone is in. If I remember right, the Google USB driver handles the ADB.
Here's the other one for fastboot
[TOOL][WINDOWS] 15 Seconds ADB Installer Reborn V2.0 - ADB/Fastboot, and Drivers.
15 Seconds ADB Installer Reborn V2.0 Introduction: We can all agree with the fact that the Android Debug Bridge (ADB) is one of the most important tools when it comes to developing for android, uninstalling bloatware, flashing recoveries...
forum.xda-developers.com
Once connected in fastboot mode, you'll have to assign the driver manually. Don't let the computer do it, it will almost always say you have the best one already. In device manager, right-click the phone(unknown android device, i think) and update driver. Then select 'browse my computer for drivers' and then 'let me pick from available drivers on my computer'.

AlexKarimov said:
That sounds like a driver issue. It's a different driver for each state the phone is in. If I remember right, the Google USB driver handles the ADB.
Here's the other one for fastboot
[TOOL][WINDOWS] 15 Seconds ADB Installer Reborn V2.0 - ADB/Fastboot, and Drivers.
15 Seconds ADB Installer Reborn V2.0 Introduction: We can all agree with the fact that the Android Debug Bridge (ADB) is one of the most important tools when it comes to developing for android, uninstalling bloatware, flashing recoveries...
forum.xda-developers.com
Once connected in fastboot mode, you'll have to assign the driver manually. Don't let the computer do it, it will almost always say you have the best one already. In device manager, right-click the phone(unknown android device, i think) and update driver. Then select 'browse my computer for drivers' and then 'let me pick from available drivers on my computer'.
Click to expand...
Click to collapse
Thank you, thank you, thank you. You were correct about the driver issue. I downloaded the official google driver, and now it shows as a device in fastboot. Thanks again.

nogods said:
Thank you, thank you, thank you. You were correct about the driver issue. I downloaded the official google driver, and now it shows as a device in fastboot. Thanks again.
Click to expand...
Click to collapse
nogods said:
Thank you, thank you, thank you. You were correct about the driver issue. I downloaded the official google driver, and now it shows as a device in fastboot. Thanks again.
Click to expand...
Click to collapse
O
AlexKarimov said:
That sounds like a driver issue. It's a different driver for each state the phone is in. If I remember right, the Google USB driver handles the ADB.
Here's the other one for fastboot
[TOOL][WINDOWS] 15 Seconds ADB Installer Reborn V2.0 - ADB/Fastboot, and Drivers.
15 Seconds ADB Installer Reborn V2.0 Introduction: We can all agree with the fact that the Android Debug Bridge (ADB) is one of the most important tools when it comes to developing for android, uninstalling bloatware, flashing recoveries...
forum.xda-developers.com
Once connected in fastboot mode, you'll have to assign the driver manually. Don't let the computer do it, it will almost always say you have the best one already. In device manager, right-click the phone(unknown android device, i think) and update driver. Then select 'browse my computer for drivers' and then 'let me pick from available drivers on my computer'.
Click to expand...
Click to collapse
yup - looks like it worked:
Erasing 'userdata' OKAY [ 15.171s]
Erase successful, but not automatically formatting.
File system type raw not supported.
Erasing 'metadata' OKAY [ 0.158s]
Erase successful, but not automatically formatting.
File system type raw not supported.
Finished. Total time: 15.797s
What nows "not automatically formating" mean?

nogods said:
O
yup - looks like it worked:
Click to expand...
Click to collapse
Awesome, thanks for the updates. I'm glad you got it going
nogods said:
What nows "not automatically formating" mean?
Click to expand...
Click to collapse
I'm not sure about this, I've never encountered that as far as I know. Did it say "can't determine partition type" after that?

Database Info

welcome