This was answered a little bit in the S-Off thread and I would like to post it for everyone that has the PJ8310000 device and they are running into device "offline" when using adb devices. This is for Windows 8 only. I had the same problem in OSX, but I believe the solution is the same. I cannot post in the thread in the developer section yet, that is why this is here.
First, if you can't see your device in your device manager, make sure you have the latest HTC Device drivers installed or install the latest version of HTC Sync. This is very important for Windows 8.
Second, you will need to download and install the latest Android SDK. Just "Download From Other Platforms" and choose the appropriate SDK installation. You will need to run the SDK Manager.exe to install the latest tools. Note: ADB and Fastboot have been moved from the "tools" folder to "platform-tools".
Make sure your phone is in debugging mode by going into the Developer Options and choosing "Android debugging."
Find your SDK installation and make sure you are under "platform-tools" folder. You can ctrl-shift-right click on that folder to open a command prompt at that folder location. Saves you time.
Type in the command prompt:
Code:
adb devices
Your device should be listed and probably says Offline. This is normal. Take a look at your phone, you should get a prompt on your phone asking you if you trust the device that is trying to connect to it (this should be your computer). Allow it.
Type in the command prompt:
Code:
adb devices
This time, your device should be listed with the word "device" instead of offline.
To restart the daemon, type the following separately:
Code:
adb kill-server
adb start-server
This is the best I can do for everyone and it solved my problems with no further issues. I am not an expert and this is the only solution that has worked for me.
Thanks, this worked for me.
I did this in Windows 7 SP1 no problem. All I had to so was get the latest Android SDK and replace all the adb/fastboot files I already had and it worked no problems.
If you get permission denied when doing the last "adb shell" command, get adbd insecure from the forums here and run debugging mode insecurely from there.
Sent from my One X using xda app-developers app
Desertman123 said:
If you get permission denied when doing the last "adb shell" command, get adbd insecure from the forums here and run debugging mode insecurely from there.
Click to expand...
Click to collapse
I had this problem because SU was only allowing apps in CM10.1 (4.2.1). I found the solution by enabling the Dev Options via multiple clicks on the Build number until dev options was enabled, then changed Root access to Apps adn ADB.
FYI for anyone else that gets lost like I was.
ok so i can s-off now?
yes get some, 9 steps to s0ff
Ponarona said:
ok so i can s-off now?
Click to expand...
Click to collapse
Yes, you can use the HTC One XL link in the S-Off thread with no issues. I made this to help people with Win8 and trying to get their phones to appear properly in their device manager and to list it under adb devices.
If you get device offline, my issue, I was running android 4.2.2 but had an outdated adb. Just update adb if you still have problems
I know this is exceedingly random, but if you run a mac and can't see your device in adb, and in the past you tried sharing your phone internet with your mac via usb try running this:
sudo kextunload /System/Library/Extensions/EasyTetherUSBEthernet.kext
./adb kill-server
I need to do that before every adb session.
I'd be amazed someone actually has those conditions, but hey, it might help someone.
Sent from my HTC One X using xda app-developers app
Are you getting errors like "device not found" or "device offline" while trying to run ADB commands? Here's a quick way to troubleshoot your problem on Windows.
Steps
1. Ensure USB Debugging is enabled in Developer Options.
2. Verify current Google USB Driver is installed and that Device Manager is using that driver.
3. Update to latest version of ADB.
1. Ensure USB Debugging is enabled in Developer Options.
Enable Developer Options by going to Settings -> About Phone and tapping on "Build Number" multiple repeated times. You will be greeted with "You are a developer."
Now, under Settings -> Developer Options, ensure you check the box for "USB debugging."
2. Verify current Google USB Driver is installed and Device Manager is using that driver.
You may skip this step if Device Manager lists your phone as "Android Phone -> Android Composite ADB Interface." If it does not, this is likely your root cause.
Go to the Google USB Driver page and download the latest driver directly from Google. Extract the zip file to a folder you know and will remember in the future.
Open up Device Manger in Windows with your Nexus 5 connected. Whatever your Nexus 5 is currently detected as, right click on it and select Properties. Then, in the Driver tab, hit "Uninstall." If available, select "Delete the driver software for this device." and hit "OK." It will remove the old drivers.
Restart your computer.
After restarting, reconnect your Nexus 5. It should be recognized as an unknown device in the Device Manager. (If it isn't, try the previous driver deletion steps again.)
Right click on the unknown Nexus 5 device, choose Properties, and in the Driver tab again select "Update driver." Browse your computer manually by putting in the path to the new Google USB Drivers you unzipped to a folder of your choice in the beginning of this step. Choose next and your drivers should install! You'll know everything completed successfully when you see the phone listed under "Android Phone -> Android Composite ADB Interface" in Device Manager.
This is the most finicky process, so don't be afraid to reboot your computer a time or two and repeat these steps if they don't work on the first try.
3. Update to latest version of ADB.
This is a crucial step. The new version of ADB is required to work with the "USB debugging authorizations" setting.
Perhaps you know how to update ADB, in which case, just do it. However, here's a detailed manual approach to download JUST the adb suite from the SDK:
Go to the Google Android SDK website and choose "Use An Existing IDE" and click the "Download the SDK Tools for Windows." This will allow you to download only an 80 MB file rather than the whole 400 MB suite.
Install the SDK tools exe to a folder of your choosing.
Run SDK Manager and uncheck everything except for "Android SDK Platform-tools." This is the ADB and Fastboot bundle. Install that.
Navigate to your SDK Path as indicated at the top of your Android SDK Manager window. You will now see a freshly downloaded platform-tools folder containing ADB.exe, Fastboot.exe, and a host of other files. That folder is now your updated, portable ADB tools folder. You can move it anywhere you like as long as you run ADB from a command prompt window set to that directory.
After you've followed these procedures, running "ADB Devices" should trigger a prompt on your device to accept the RSA fingerprint of your computer. Accept it, and now all should be working as intended!
Questions? Ask below!
Crowd-sourced solutions.
Windows 8 Diagnosis
Yorus said:
The following worked for me, since all of the suggestions mentioned here didn't work for me:
If you use a Windows 8.1 enterprise N or KN edition, install the Microsoft Media Feature Pack :
http://support.microsoft.com/kb/2929699/en
Sounds too simple to be true but work instantly for me.
Hope it works you some of the people here looking for a solution
Click to expand...
Click to collapse
Setting up ADB and Fastboot commands to work from ANY path (credit to original author in quote).
Chromium_ said:
Setup, Preparation and Prerequisites
ADB and Fastboot Installation
Download the full Android SDK here (scroll to the bottom of the page>DOWNLOAD FOR OTHER PLATFORMS>SDK Tools Only) or get a slimmed version containing only the essential components here (Thanks @El Daddy)
Extract the zip and place the android-sdk-windows folder on the root of your hard drive. (the path should be like this: C:\android-sdk-windows)
**If you chose to download the slimmed sdk skip to step 5**
Only if you downloaded the full sdk: Go into the folder and run SDK Manager.exe. Install the following packages (there are a total of 4 packages):
- Tools > Android SDK Tools, Android SDK Platform-tools
- Extras > Android Support Library, Google USB Driver
Only if you downloaded the full sdk: Go back into the android-sdk-windows directory, and you should see a new folder named platform-tools. If not, repeat the step above.
Open a command prompt window and run "sysdm.cpl" (without the quotes) and a new window should popup. Go to the Advanced tab > Environmental Variables
Now focus your attention to the System variables box (the lower box). Scroll down and look for the Path variable > highlight it > click Edit > go all the way to the end of the Variable value text box, and paste the following entry:
Code:
;C:\android-sdk-windows\platform-tools
(OR WHATEVER PLATFORM-TOOLS DIRECTORY YOU PICKED)
Click OK then close all of the System Properties windows
You should now be able to use adb/fastboot commands no matter what location your command prompt is in. To confirm that it is indeed working, open a command prompt window and enter "adb version" (without the quotes). If it displays "Android Debug Bridge version x.x.xx" it is working. If it is gives an error saying that adb is not a recognized command, it has not been successful. Carefully repeat the steps above if this is the case.
Click to expand...
Click to collapse
The importance of being careful with your command choices.
MkVsTheWorld said:
"Be sure to use the CORRECT adb/fastboot commands, double-check the path on all commands, and double-check the existence of each file you are working with."
I hate to admit this, but I couldn't figure out why nothing was appearing in the device list when I did "adb devices", while the phone was in Fastboot. I did everything from A-Z and tore my hair out for 30 minutes until it hit me, my phone's in Fastboot. I've been messing with Android for 3+ years and made a newbie mistake lol.
Click to expand...
Click to collapse
Fixing MTP device not showing up after installing ADB drivers.
dbareis said:
I'm not sure what happened but on my WINDOWS 7 (64 bit) OS I had to modify "%WINDIR%\inf\wpdmtp.inf" as shown here: "http://forum.xda-developers.com/showpost.php?p=37930602&postcount=937". I then uninstall the device and drivers and performed a hardware scan to get it to work. I also added a "...PID_4EE2&MI_01" line but I am not positive that was required.
Hope that helps someone.
Click to expand...
Click to collapse
Whyzor said:
You should also mention what worked for me in post #16 (& confirmed by a few others in other threads). That is to toggle Settings - Storage - USB Connection type from Camera to Mass storage & also the debugging mode on & off.
Click to expand...
Click to collapse
Ashcunak said:
Op might wanna tack this onto the bottom of the main post as a last resort for folks to "start over" and be sure they have no old drivers installed.
http://www.nirsoft.net/utils/usb_devices_view.html
i had to use this program (right click run as admin if permissions are set) to remove EVERY single android related driver in order to get mine working.. turns out i had so many old ones in my system and some i couldn't remove from the device manager, the buttons wouldn't become click able..
Click to expand...
Click to collapse
CrazyIvan said:
I've tried everything and cannot get the authorization prompt to pop up on my Nexus5 so when I run adb devices the phone shows up as "unauthorized". Any suggestions? This is with updated sdk and USB drivers. Device manager shows phone as "Android Phone->Android Composite ADB Interface" and "Portable Device->Nexus 5". Tried toggling between MTP/PTP, USB Debugging on/off, stopping and starting the adb server (latest version 1.0.31).
Thanks in advance!
EDIT: Finally got the ba$tard! Run this for some adb debug logging:
adb kill-server
set ADB_TRACE=all
adb nodaemon server
Go and look back at the output from the start for any errors. In my case it couldn't mkdir in c:\users\administrator, which for me doesn't exist. I changed the Windows environment variable "ANDROID_SDK_HOME" to point to "C:\users\<my account dir>", closed the DOS window, re-ran the commands and I got prompted for the permission on my phone. Yee ha! Now I can fire up hello world with the SDK on my phone. Praise be to Google search for turning up this thread that told me about the debug logging.
Click to expand...
Click to collapse
SonicAngel said:
I just rooted my N5 (using the guide on this forum so I had no other drivers other than Google's SDK) and after unlocking my bootloader windows did not recognize my phone so I couldn't go further. Upon checking device manager I saw something called "AOSP on Hammerhead", a quick online search found a lot of very complicated answers (uninstall all drivers, restart, install adb drivers was one example).
Instead of all that I just right clicked "AOSP on Hammerhead", chose Update Driver, manually choose driver, went to "Android bootloader", chose the default driver from "Google inc" manually and that for some reason worked.
I figured this might help someone since the other solutions I found really were very long.
Click to expand...
Click to collapse
Questions? Ask below!
MaxRabbit said:
Reserved.
Questions? Ask below!
Click to expand...
Click to collapse
Hey man, thanks for the tutorial, I seem to still have trouble with this. Followed all the steps, even reset the device, to no avail. Anyone else having issues?
KTT16 said:
Hey man, thanks for the tutorial, I seem to still have trouble with this. Followed all the steps, even reset the device, to no avail. Anyone else having issues?
Click to expand...
Click to collapse
You're welcome! What shows up in your Device Manager now?
MaxRabbit said:
You're welcome! What shows up in your Device Manager now?
Click to expand...
Click to collapse
Hey thanks for the quick reply! I got it to work finally via: http://forum.xda-developers.com/showthread.php?t=2507905
Great tips and tutorial though..so stoked to have this phone!
KTT16 said:
Hey thanks for the quick reply! I got it to work finally via: http://forum.xda-developers.com/showthread.php?t=2507905
Great tips and tutorial though..so stoked to have this phone!
Click to expand...
Click to collapse
What step exactly did you take that fixed it?
MaxRabbit said:
What step exactly did you take that fixed it?
Click to expand...
Click to collapse
Open a command prompt window and run "sysdm.cpl" (without the quotes) and a new window should popup. Go to the Advanced tab > Environmental Variables
Now focus your attention to the System variables box (the lower box). Scroll down and look for the Path variable > highlight it > click Edit > go all the way to the end of the Variable value text box, and paste the following entry:
Code:
;C:\android-sdk-windows\platform-tools
Click OK then close all of the System Properties windows
You should now be able to use adb/fastboot commands no matter what location your command prompt is in. To confirm that it is indeed working, open a command prompt window and enter "adb version" (without the quotes). If it displays "Android Debug Bridge version x.x.xx" it is working. If it is gives an error saying that adb is not a recognized command, it has not been successful. Carefully repeat the steps above if this is the case.
KTT16 said:
Open a command prompt window and run "sysdm.cpl" (without the quotes) and a new window should popup. Go to the Advanced tab > Environmental Variables
Now focus your attention to the System variables box (the lower box). Scroll down and look for the Path variable > highlight it > click Edit > go all the way to the end of the Variable value text box, and paste the following entry:
Code:
;C:\android-sdk-windows\platform-tools
Click OK then close all of the System Properties windows
You should now be able to use adb/fastboot commands no matter what location your command prompt is in. To confirm that it is indeed working, open a command prompt window and enter "adb version" (without the quotes). If it displays "Android Debug Bridge version x.x.xx" it is working. If it is gives an error saying that adb is not a recognized command, it has not been successful. Carefully repeat the steps above if this is the case.
Click to expand...
Click to collapse
Ahh, your problem with my instructions then were that you weren't running ADB from inside the platform-tools folder
Definitely! I seriously got frustrated for a second and forgot how to read!
Sent from my Nexus 5 using XDA Premium 4 mobile app
Not showing up as removable storage
Hi, maybe you can help me.
Last night I unlocked my N5 using CF-Root, and flashed TWRP using Flashify. However, when I plug my N5 into my home computer it doesn't ever show up under 'My Computer' with other removable storage devices. It is present in the device manager under 'Android Phone -> Google Nexus ADB Interface'.
I've tried restrarting my computer, uninstalling the drivers and reinstalling them. Developer mode is enabled and if I switch from MTP to PTP then is shows up under removable storage, but I only have access to the DCIM folder. Switching back to MTP makes it disappear.
On my work computer it shows up correctly no problem.
My personal computer has had multiple installations of WugFresh Root toolkit and ADB/SDK files for my previous Galaxy Nexus and Nexus 7 but I uninstalled most of that before setting up the N5.
Thanks!
JonnyRock said:
Hi, maybe you can help me.
Last night I unlocked my N5 using CF-Root, and flashed TWRP using Flashify. However, when I plug my N5 into my home computer it doesn't ever show up under 'My Computer' with other removable storage devices. It is present in the device manager under 'Android Phone -> Google Nexus ADB Interface'.
I've tried restrarting my computer, uninstalling the drivers and reinstalling them. Developer mode is enabled and if I switch from MTP to PTP then is shows up under removable storage, but I only have access to the DCIM folder. Switching back to MTP makes it disappear.
On my work computer it shows up correctly no problem.
My personal computer has had multiple installations of WugFresh Root toolkit and ADB/SDK files for my previous Galaxy Nexus and Nexus 7 but I uninstalled most of that before setting up the N5.
Thanks!
Click to expand...
Click to collapse
same issue on my side...I canot use MTP only PTP...I also tryed new drivers from SDK but has not solved the problem
Alex
JonnyRock said:
Hi, maybe you can help me.
Last night I unlocked my N5 using CF-Root, and flashed TWRP using Flashify. However, when I plug my N5 into my home computer it doesn't ever show up under 'My Computer' with other removable storage devices. It is present in the device manager under 'Android Phone -> Google Nexus ADB Interface'.
I've tried restrarting my computer, uninstalling the drivers and reinstalling them. Developer mode is enabled and if I switch from MTP to PTP then is shows up under removable storage, but I only have access to the DCIM folder. Switching back to MTP makes it disappear.
On my work computer it shows up correctly no problem.
My personal computer has had multiple installations of WugFresh Root toolkit and ADB/SDK files for my previous Galaxy Nexus and Nexus 7 but I uninstalled most of that before setting up the N5.
Thanks!
Click to expand...
Click to collapse
This is a really strange problem :-/ what does it show up as when you are in device manager on your work computer?
MaxRabbit said:
This is a really strange problem :-/ what does it show up as when you are in device manager on your work computer?
Click to expand...
Click to collapse
It shows up as a 'Portable Device' -> 'Portable Media Player' (I was thinking it was a 'Device with Removable Storage').
I have full access to the internal file folders here at work.
Here's a suggestion for something to add to the OP.
"Be sure to use the CORRECT adb/fastboot commands, double-check the path on all commands, and double-check the existence of each file you are working with."
I hate to admit this, but I couldn't figure out why nothing was appearing in the device list when I did "adb devices", while the phone was in Fastboot. I did everything from A-Z and tore my hair out for 30 minutes until it hit me, my phone's in Fastboot. I've been messing with Android for 3+ years and made a newbie mistake lol.
Sent from my Nexus 5 using Tapatalk
JonnyRock said:
Hi, maybe you can help me.
Last night I unlocked my N5 using CF-Root, and flashed TWRP using Flashify. However, when I plug my N5 into my home computer it doesn't ever show up under 'My Computer' with other removable storage devices. It is present in the device manager under 'Android Phone -> Google Nexus ADB Interface'.
I've tried restrarting my computer, uninstalling the drivers and reinstalling them. Developer mode is enabled and if I switch from MTP to PTP then is shows up under removable storage, but I only have access to the DCIM folder. Switching back to MTP makes it disappear.
On my work computer it shows up correctly no problem.
My personal computer has had multiple installations of WugFresh Root toolkit and ADB/SDK files for my previous Galaxy Nexus and Nexus 7 but I uninstalled most of that before setting up the N5.
Thanks!
Click to expand...
Click to collapse
I have the same problem and done the same exact things u did. any help?
I'm having no luck with unlocking bootloader of my Nexus 5 today. I've unlocked previous Android devices fine, but this one for some reason it's not detecting it in USB drivers. It shows as Other devices -> Nexus 5 in device manager, but when I select update driver & navigate to the dir where Android SDK/extras/google/usb_driver
Windows was unable to install your Nexus 5
Windows could not find driver software for your device.
I updated the OTA that came right away earlier, maybe this caused the Windows USB drivers to not work match the updated OTA build? Is there a way to ensure that old windows driver is uninstalled? I can only select 'uninstall', but not the 'remove old driver files' some docs mention. Also when I connect my Nexus 4 it's fine, and enabling debugging mode prompts for to allow the security fingerprint of the PC. But this prompt doesn't appear on Nexus 5, not sure if it's supposed to happen AFTER the PC is able to communicate with the N5 or not, which is the step that I'm stuck on. Tried it on another Windows 7 system and same problem.
UPDATE: Well my Nexus 4 worked fine along with adb until a few minutes ago, after toggling the Debugging Mode on the phone, it's not recognized on Windows now either. So definitely think it's a Windows 7 or Google USB Driver issue. Any pointers on how to start over (without reinstalling Windows) would be appreciated.
UPDATE 2: For future reference, I got around my Windows driver issue by going into Nexus - Settings - Storage - USB computer connection, toggle to Camera (PTP) and Media device (MTP), that reinitialized windows to recognize it in Device Manager again. Stupid Windows.
aluxzen said:
same issue on my side...I canot use MTP only PTP...I also tryed new drivers from SDK but has not solved the problem
Alex
Click to expand...
Click to collapse
I'm not sure what happened but on my WINDOWS 7 (64 bit) OS I had to modify "%WINDIR%\inf\wpdmtp.inf" as shown here: "http://forum.xda-developers.com/showpost.php?p=37930602&postcount=937". I then uninstall the device and drivers and performed a hardware scan to get it to work. I also added a "...PID_4EE2&MI_01" line but I am not positive that was required.
Hope that helps someone.
Whyzor said:
UPDATE 2: For future reference, I got around my Windows driver issue by going into Nexus - Settings - Storage - USB computer connection, toggle to Camera (PTP) and Media device (MTP), that reinitialized windows to recognize it in Device Manager again. Stupid Windows.
Click to expand...
Click to collapse
That... Thankyou for that info.
I was able to get ADB to work but was not able to get the device to popup as a storage device. That fixed it. Thanks!
I'm not sure what happened but on my WINDOWS 7 (64 bit) OS I had to modify "%WINDIR%\inf\wpdmtp.inf" as shown here: "http://forum.xda-developers.com/show...&postcount=937".
Click to expand...
Click to collapse
Thanks, that link was really helpful! I struggled with the correct detection before (seems I had some old drivers for my last phone on that windows installation...)
Whyzor said:
I'm having no luck with unlocking bootloader of my Nexus 5 today. I've unlocked previous Android devices fine, but this one for some reason it's not detecting it in USB drivers. It shows as Other devices -> Nexus 5 in device manager, but when I select update driver & navigate to the dir where Android SDK/extras/google/usb_driver
Windows was unable to install your Nexus 5
Windows could not find driver software for your device.
I updated the OTA that came right away earlier, maybe this caused the Windows USB drivers to not work match the updated OTA build? Is there a way to ensure that old windows driver is uninstalled? I can only select 'uninstall', but not the 'remove old driver files' some docs mention. Also when I connect my Nexus 4 it's fine, and enabling debugging mode prompts for to allow the security fingerprint of the PC. But this prompt doesn't appear on Nexus 5, not sure if it's supposed to happen AFTER the PC is able to communicate with the N5 or not, which is the step that I'm stuck on. Tried it on another Windows 7 system and same problem.
UPDATE: Well my Nexus 4 worked fine along with adb until a few minutes ago, after toggling the Debugging Mode on the phone, it's not recognized on Windows now either. So definitely think it's a Windows 7 or Google USB Driver issue. Any pointers on how to start over (without reinstalling Windows) would be appreciated.
UPDATE 2: For future reference, I got around my Windows driver issue by going into Nexus - Settings - Storage - USB computer connection, toggle to Camera (PTP) and Media device (MTP), that reinitialized windows to recognize it in Device Manager again. Stupid Windows.
Click to expand...
Click to collapse
Thank you for sharing your solution.
Hello. As the title says I get that error. I need to run adb shell to use some commands. When I type "adb devices" I don't get any device listed (the long name).
My OS is Windows 8.1 64bit.
Thanks.
KodRoute said:
Hello. As the title says I get that error. I need to run adb shell to use some commands. When I type "adb devices" I don't get any device listed (the long name).
My OS is Windows 8.1 64bit.
Thanks.
Click to expand...
Click to collapse
Whats your device?
LS.xD said:
Whats your device?
Click to expand...
Click to collapse
Nexus 5. In SDK Manager it says that Google USB Drivers are installed. I don't get it. When I use the phone to flash images in fastboot it works perfectly but ADB doesn't work.
KodRoute said:
Nexus 5. In SDK Manager it says that Google USB Drivers are installed. I don't get it. When I use the phone to flash images in fastboot it works perfectly but ADB doesn't work.
Click to expand...
Click to collapse
Try to disable/enable USB debugging again and check if the adb device is listed in your device manager.
You can also try this ADB/fastboot bundle (Includes the google drivers) and work on all folders
LS.xD said:
Try to disable/enable USB debugging again and check if the adb device is listed in your device manager.
You can also try this ADB/fastboot bundle (Includes the google drivers) and work on all folders
Click to expand...
Click to collapse
Yeah after a while I wanted to check if usb debugging was checked and it wasn't. Turns out now works.
KodRoute said:
Yeah after a while I wanted to check if usb debugging was checked and it wasn't. Turns out now works.
Click to expand...
Click to collapse
May you press "thanks" for my posts if i helped you ?!
KodRoute said:
Yeah after a while I wanted to check if usb debugging was checked and it wasn't. Turns out now works.
Click to expand...
Click to collapse
Doh! I hate when that happens. It's always the little things.
Hi
I have a old nexus with broken touchscreen . I want to use it via mirror on pc.
unfortunatly USB debuggin wasn't enable so i can't install any app.
any tips?
thanks
PS: i saw many use usb adapter to connect a mouse but i don't have it
EDIT: right now i just need a rom/kernel with USB debugging mode enabled by default
the screen still works , only the touch screen is broken
power , and volume bottons still work
the device is rooted
If it's only installing apps you could install them via recovery. (as zip)
Or you could check for a cheap replacement touchscreen.
nonameleft4me said:
If it's only installing apps you could install them via recovery. (as zip)
Or you could check for a cheap replacement touchscreen.
Click to expand...
Click to collapse
thanks for the answer!
sorry i forgot to mention that i need USB debuggin for make the app works correctly.
I'm trying now to find out what rom i have installed and maybe then find a kernel with OTG support . (yes i found a otg cable )
i'm not a expert of rooting
I think google has an app called voice control. Not sure how operational it is though. Supposedly you can control the entire system via voice.
nonameleft4me said:
I think google has an app called voice control. Not sure how operational it is though. Supposedly you can control the entire system via voice.
Click to expand...
Click to collapse
i need to unlock the phone and tap on the widget "search" to start voice command .
I think the best way is to find a way to enable OTG and then use a usb mouse
Boot into Recovery and mount*Data*partition.
Open a shell on PC and type:
adb pull /data/property/persist.sys.usb.config ~/
Repace*~/*with home directory of your OS.
Open that file in a text editor and you would possibly see*mtp*written there. Change it to*mtp,adb.
Note that sometimes Android doesn't understand the text file changes if the line terminator is "DOS Terminators" which Notepad would probably do on Windows (mine is Linux so no issue here).
In that case, I would suggest not using*adb pullbut doing:
adb shell echo 'mtp,adb' > /data/property/persist.sys.usb.config
You may verify that the*echo*command overwrote the file by using:
adb pull /data/property/persist.sys.usb.config ~/
and seeing the file's content in some text editor.
Unmount*Data*and reboot into Android OS. USB Debugging would probably be enabled.
Sent from my Aqua Trend using Tapatalk
Itzabhaysingj said:
Boot into Recovery and mount*Data*partition.
Open a shell on PC and type:
adb pull /data/property/persist.sys.usb.config ~/
Repace*~/*with home directory of your OS.
Open that file in a text editor and you would possibly see*mtp*written there. Change it to*mtp,adb.
Note that sometimes Android doesn't understand the text file changes if the line terminator is "DOS Terminators" which Notepad would probably do on Windows (mine is Linux so no issue here).
In that case, I would suggest not using*adb pullbut doing:
adb shell echo 'mtp,adb' > /data/property/persist.sys.usb.config
You may verify that the*echo*command overwrote the file by using:
adb pull /data/property/persist.sys.usb.config ~/
and seeing the file's content in some text editor.
Unmount*Data*and reboot into Android OS. USB Debugging would probably be enabled.
Sent from my Aqua Trend using Tapatalk
Click to expand...
Click to collapse
thanks!
i tryed
1) i went in recovery mode
2) i connect via usb the nexus4 to my pc
3)went in "mounts and storage"
4)then "mount /data"
5)in cmd i tryed your command "adb pull /data/property/persist.sys.usb.config" but i says i'm unauthorized
i checked via command "adb devices" and it return a alphanumerica string plus "unauthorized"
i tryed then to
Reboot your phone into recovery mode.
Connect it to your computer.
Open the terminal and type:
cd ~/.android
adb push adbkey.pub /data/misc/adb/adb_keys
adb shell reboot
but it still says error : device unauthorizated . please check the confirmation dialog on your device
i tryed also with a different version of adb and now gives me after "adb devices" an "offline" response
NB: if i connect the phone (not in recovery mode) via usb i can copy files in and out (i can explore onlyfew folders) , maybe this could help.
hartman11 said:
i tryed also with a different version of adb and now gives me after "adb devices" an "offline" response
NB: if i connect the phone (not in recovery mode) via usb i can copy files in and out (i can explore onlyfew folders) , maybe this could help.
Click to expand...
Click to collapse
Sorry but this could not help... Now only thing you can do is connect any USB mouse to your phone via otg cable (as it is not costly also), and you can also try USB gamepad. I also have used USB gamepad before when my touchscreen was not working.
Second thing you can do is download any android device manager for your PC like mobogenie or mobilego they directly install any app from play store to you android device, through USB.And I don't think they need USB debugging option to be enabled.
Sent from my Aqua Trend using Tapatalk
my problem is not installing an app (i could do it in recovery mode with a .zip) but enabling the USB debuggin
I have a otg cable but not the "Y" type ( the one with power source ) , also i don't know if OTG is supported by my kernel . I would like to install maybe another kernel which has OTG support and usb debuggin mode enable by default but i don't know what kind of rom i have D:
right now i just need a rom/kernel with USB debugging mode enabled by default
up
Hello Everyone,
I would like to learn how to remove bloatware Apps from my Android phone.
I have tried using "ADB commands" but for some reason my computer doesn't recognize/find my Android phone when I connect it to it.
Please help.
Thanks in advance
Download drivers for samsung and enabled adb developer option then type following "adb devices" press enter and should see serial number indicating phone connected via adb
petiolarissean said:
Download drivers for samsung and enabled adb developer option then type following "adb devices" press enter and should see serial number indicating phone connected via adb
Click to expand...
Click to collapse
Hello, and Thanks
I have done that exactly, but it still doesn't work.
And I can't figure out why is not working.
I have installed the Samsung driver, allowed the ADB function on my phone from "Developer Options" etc.
In addition to the advices by petiolarissean , check whether the driver works well, please.
In the 'Devices Manager' of your Windows, check the driver for your Android phone.
If this doesn't work yet, change an usb cable and then try again.
Only to have mentioned it:
So-called bloatware typically is housed in Android's locations /system and/or /system/priv--apps what only can get accessed by Android's root-user after successfully mounted as RW.
James_Watson said:
In addition to the advices by petiolarissean , check whether the driver works well, please.
In the 'Devices Manager' of your Windows, check the driver for your Android phone.
If this doesn't work yet, change an usb cable and then try again.
Click to expand...
Click to collapse
Thanks for your help
I think I will buy a new USB cable and give it a try, hopefully it will work.
Have a nice day
Sorry late reply.I have like 5 different phone.Hard core modder.
This question help alot
Even though you csnt get adb working
Can you still move files from your phone to pc or computer.Or nothing ay all.Your answr will tell me your problem