Black screen after installing CyanogenMod 10.1 nightly - AT&T, Rogers HTC One X, Telstra One XL

So just installed the nightly on my AT&T hox and I go to boot it up AFTER wiping the dalvik and system cache and now I'm stuck at a black screen.
I've googled the issue but I don't see any boot logo, just a black, LED less screen.
Did I mess up?

Nevermind, I'm an idiot.
Forgot the command,"
fastboot flash boot boot.img"

You should s-off and you won't have to fast boot everytime
Sent from my One X using xda app-developers app

Related

One X in Bootloop

After canceling a flash of Sick Sense, my One x wont boot now. I would boot into bootloader and hit recovery and twrp splashscreen shows for a split second, then reboots to htc splashscreen, staying like that forever. What should I do? Fastboot install another recovery?
ethantarheels123 said:
After canceling a flash of Sick Sense, my One x wont boot now. I would boot into bootloader and hit recovery and twrp splashscreen shows for a split second, then reboots to htc splashscreen, staying like that forever. What should I do? Fastboot install another recovery?
Click to expand...
Click to collapse
Looks like you are unlocked ... so try to boot into "bootloader" and reflash recovery ...
If nothing helps ... relock bootloader and flash RUU ...
Boot into the bootloader
Flash TWRP again (must be TWRP as CWM does not have USB mount yet)
Boot into TWRP
Mount USB
Transfer your ROM of choice onto your phone
Unmount USB
Do a factory reset from TWRP
Flash the .zip
Reboot and hope for the best
If that doesn't work then you could just run the RUU from fastboot.
Yea I was out and about with no internet just my phone me and my laptop lol. What I ended up having to do was relock and ruu back to 1.85. Thanks for the help guys. Now I hope I can still reunlock lol
Sent from my HTC One X using XDA
What happened earlier was that, even though I was able to get and boot into cwm, the sd card got unmounted somehow so I couldn't flash or restore anything.
Sent from my HTC One X using XDA
AT&T HOX Stuck in Boot Loop after trying to flash a rom using Flash Image GUI
First of all thank you to everyone who is willing to help me out. I apologize if I missed the answer I'm looking for. Here is what's going on:
I successfully rooted my HTC One X (At&T) using TWRP a couple days ago. I created two backups in TWRP, one before rooting and one after. I then tried to install viperx 3.3.1 using Flash Image GUI from the playtstore and after the install finished I am not stuck in a boot loop on the screen that says "HTC quietly brilliant" and has the disclaimer written in red. I turned my phone off and rebooted holding the power button and volume down button and tried to do a restore of one my backups in TWRP. However I am still stuck in a boot loop. I tried restoring to the other backup also and still in a boot loop. I tried wiping the cache, Dalvik Cache, and System and then rebooting but same thing. I would appreciate any help at all. Thank you an advance for your time.
You have to flash the boot img of your backups...but just flash viper and flash the boot img
Whoa whoa whoa whoa... we don't have viper 3.3... he just released 3.2 today... sooooo it looks like you tried to flash the international version of viper
Sent from my evita using Tapatalk 2

Black screen boot into recovery

I used to be able to boot into recovery just fine but after flashing clock work mod when I try to boot into recovery from rom manager it gets stuck on the lg screen and I have to pull the battery when i try to boot into recovery using the hardware keys it goes to a black blank screen
Sent from my VM670 using xda app-developers app

[Q] S-Off Boot Loop/Crashing on boot

Hey everyone. I just did the S-Off and everything went fine except for the boot loop issue using a 4.1.x based rom in which I had CM10 installed. I installed CM10.1 (4.2.2) and booted up fine. I then tried to install the KingKang rom and it started bootlooping again. So per the usual I held down power and vol down to get to the bootloader to get back to TWRP and now it wouldnt turn on. I went to plug it in and then it went to the HTC white logo with red warning and shut off immediately. Couldnt get the charge light or anything and still no normal boot, bootloader, or download mode. Any ideas?
AT&T HTC One X evita
HBOOT 1.14
Bootloader Unlocked and S-Off
Resolved. Throwing the phone at the wall must've jarred the battery and was able to get to recovery via bootloader. Weird...
Sent from my HTC One X using xda app-developers app
As for the HTC logo bootloop after s-off, has anyone had this problem as well and/or found a fix?
Sent from my HTC One X using xda app-developers app
first custom rom i installed after s-off was ICJ and it gave me alot of hell even got qhsusb_dload once i wiped and flash cm10.1 and that has been fine. not sure if s-off had anything to do with it since i never flashed ICJ beforehand.
Yeah I think I'm done with flashing roms etc. until all the problems are worked out. All I can get to work without looping is CM10.1 and CleanRom 5.1.
im owned hahaha i have s-off and i can get into fastboot but not into recovery, tried to flash twrp but still wont boot into recovery, and i cant boot normally, starts booting and i hear the booting sound but it just gets stuck at the htc quietly brillant white screen, after a while just reboots and gets stuck again.
pikul said:
im owned hahaha i have s-off and i can get into fastboot but not into recovery, tried to flash twrp but still wont boot into recovery, and i cant boot normally, starts booting and i hear the booting sound but it just gets stuck at the htc quietly brillant white screen, after a while just reboots and gets stuck again.
Click to expand...
Click to collapse
you did flash the evita recovery right? i would flash this one openrecovery-twrp-2.3.3.1-evita.img
yes, i actually try to install diferent versions including that one :/

[STOCK] HTC One X stuck in boot loop (Debugging off)

I recently got a HTC one X. And when I try turning it on it is looping the HTC screen and failing to boot. I can get it into the Bootloader screen and everything but I cant boot it up. The phone is completely stock and USB debugging is disabled... I have already tried erasing the Fastboot cache and it didnt work. I have also re-installed the stock RUU that it is running (2.20.502.7), but once its done installing it tries booting up and goes straight into the same boot loop. Is there any way I can get this phone back to working condition?
(Note the phone is NOT rooted and the bootloader is locked)
You'll have to send it in for warranty
Sent from my One X using xda app-developers app
Fastboot erase cache is known to do this, it formats it in the wrong format and it won't boot. If you had custom recovery it's an easy solution. You should try factory reset from bootloader and see if it fixes it.
Sent from my evita
Oh I misread, I thought he factory reset in bootloader already
Sent from my One X using xda app-developers app

Constantly boots into bootloader

Hey guys, I think I made a fatal mistake. My battery was at 3%, and I attempted to flash Franco Kernel r25. The phone rebooted into a black screen. I did a hard reset, and it sent me to the bootloader. From there, I attempted to start, but it gets me a black screen again. I went into TWRP recovery to reboot and shutoff, but still doesn't work. Every hard reset brought up the bootloader, every start gives me a black screen.
Thanks
Flash Google factory images.
Sent from my SCH-I535 using Tapatalk
I had this problem once, the only way was to get into recovery mode then install the ROM again (better wipe before install)
it worked for me.
Wow, just flashed the r25 img, i guess the install didnt finish earlier. THANKS!!!!
You can also flash a backup
Sent from my Nexus 5 using XDA Premium 4 mobile app

Categories

Resources