Database Info

[S4][Nandroid Backup][twrp] Stock Odex Rom EUR 2.31.401.5

For those stuck at recovery/ haven't received the elusive OTA update / require a STOCK ROM for any valid reason, this is a PURE STOCK ODEX EUR 2.32.401.5 FIRMWARE BACKUP (ROOTED). The backup includes BOOT,SYSTEM, DATA partitons and RECOVERY.
Received OTA update to 2.31 after changing CID to HTC_Y13, restoring stock recovery, bootloader LOCK and flashing 2.2 RUU. DONOT CHANGE THE BACKUP NAME! backup dated new as it was wiped/cleaned version of my earlier 2.31 backup. Until HTC Dev releases the RUU for 2.31 update suffice with this!
This backup WON'T UPDATE your RADIO baseband or HBOOT! (chrikenn)​
LINKS:
2.31 NANDROID BACKUP (TWRP)
MIRROR#1 thanks to mdiaz33685
MIRROR#2 part1
MIRROR#2 part2
Specs:
BASEBAND: 1.06es.50.02.31_10.09a.50.04L
BUILD: 2.31.401.5
HTC Sense: 4.1
Android Ver: 4.0.4
METHOD:
EXTRACT to TWRP > BACKUp folder
RESTORE from TWRP recovery
Those stuck at HTC LOGO on Boot, flash stock boot.img file as quoted below.
​METHOD:
1- Reboot to HBOOT (phone turned off, press volume low and power key)
2- Choose FASTBOOT, connect your phone to PC!
3- Extract the fastboot folder attached (else extract the boot.img file to fastboot folder if exists in your PC)
4- Run CMD > cd to Fastboot folder > type fastboot flash boot boot.img
ICWS said:
Additionately I think we need a boot.img to flash, because everytime I restored a TWRP backup I had to do so. When I didn't I got stuck on boot.
Click to expand...
Click to collapse
rootrider said:
Right. If anybody needs it, he can download the boot.img offered in the viper rom thread, right under installation instructions. It's stock and can be flashed in recovery mode via 'fastboot flash boot boot.img'.
Click to expand...
Click to collapse

mughalgxt said:
For those stuck at recovery/ haven't received the elusive OTA update / require a STOCK ROM for any valid reason, this is a PURE STOCK ODEX EUR 2.32.401.5 FIRMWARE BACKUP (am unsure if its rooted, as am running ViperSROM and feel no urge to revert to stock). The backup includes BOOT,SYSTEM, DATA partitons and RECOVERY.
Received OTA update to 2.31 after changing CID to HTC_Y13, restoring stock recovery, bootloader LOCK and flashing 2.2 RUU. Hence a complete update with updated RADIO fimware (not a modded 2.31 OTA update flashed from custom recovery). DONOT CHANGE THE BACKUP NAME! backup dated new as it was wiped/cleaned version of my earlier 2.31 backup. Until HTC Dev releases the RUU for 2.31 update suffice with this!
LINK:
2.31 NANDROID BACKUP (TWRP)
Specs:
BASEBAND: 1.06es.50.02.31_10.09a.50.04L
BUILD: 2.31.401.5
HTC Sense: 4.1
Android Ver: 4.0.4
METHOD:
EXTRACT to TWRP > BACKUp folder
RESTORE from TWRP recovery
Click to expand...
Click to collapse
Thanks dude. One thing to note is that I'm pretty sure a nandroid does not restore radio or recovery. So even though it updated those things for you when you were completely stock and ran the actual OTA, I believe that anybody who flashes this nandroid will keep whatever radio and recovery they have when they flash it. If they are on hboot lower than 1.13, they can separately flash the 1.06es radio in TWRP.

should the bootloader be locked? or can i just restore this with un-locked bootloader hboot 1.13 and root?

McGiver93 said:
should the bootloader be locked? or can i just restore this with un-locked bootloader hboot 1.13 and root?
Click to expand...
Click to collapse
You are supposedly restoring this back up from recovery and long as you have a custom recovery twrp you can use this.

Additionately I think we need a boot.img to flash, because everytime I restored a TWRP backup I had to do so. When I didn't I got stuck on boot.

ok but like chrikenn said with this backup the radio won't update right?

ICWS said:
Additionately I think we need a boot.img to flash, because everytime I restored a TWRP backup I had to do so. When I didn't I got stuck on boot.
Click to expand...
Click to collapse
Besides flashing custom roms, never had to flash boot.img separately when restoring nandroid backup.

Not working for me... One S T-Mob US

once again thank you, im still outta thanks... i will get u later when they give me more thanks... hehehe............... hahahaha

juniorxdb said:
Not working for me... One S T-Mob US
Click to expand...
Click to collapse
Elaborate! YOu should have TWRP recovery not CWM or STOCK recovery.

ICWS said:
Additionately I think we need a boot.img to flash, because everytime I restored a TWRP backup I had to do so. When I didn't I got stuck on boot.
Click to expand...
Click to collapse
Right. If anybody needs it, he can download the boot.img offered in the viper rom thread, right under installation instructions. It's stock and can be flashed in recovery mode via 'fastboot flash boot boot.img'.

i have to wait 5 hours to download again... didnt work with twrp......
edit: must of been a bad download.. worked after the 2nd download

mughalgxt said:
Elaborate! YOu should have TWRP recovery not CWM or STOCK recovery.
Click to expand...
Click to collapse
I us TWRP, but stopped on HTC Logo Screen, after restored...

juniorxdb said:
I us TWRP, but stopped on HTC Logo Screen, after restored...
Click to expand...
Click to collapse
Well, than as pointed afore you have to fastboot boot.img file check 2 posts above yours.

McGiver93 said:
ok but like chrikenn said with this backup the radio won't update right?
Click to expand...
Click to collapse
YES, this backup won't update your radio or Hboot!

mughalgxt said:
YES, this backup won't update your radio or Hboot!
Click to expand...
Click to collapse
I just have to say 1 thing.... GOOD JOB... thank you so much... got everything working...
sorry i still cant thank you... i owe u some thanks.... :silly:
xda... why can we only use 8 thanks.... ridiculous..... i will see what happens tomorrow...

thanks mate but the site keeps timing out for me when I click download! Another guys flashable rom doesn't work so I thought I'd download this. I'm not going to waste my time and install 2.21 again just because the website is being a *****! I'll wait till the morning lol it's not my day. Awful Hosting site!

Need mirrors please. Download not working - timing out. OP - could you please upload somewhere else? Maybe dropbox?

mdiaz33685 said:
I just have to say 1 thing.... GOOD JOB... thank you so much... got everything working...
sorry i still cant thank you... i owe u some thanks.... :silly:
xda... why can we only use 8 thanks.... ridiculous..... i will see what happens tomorrow...
Click to expand...
Click to collapse
Its fine, it helped you acknowledged thats it!:angel:

mughalgxt said:
Its fine, it helped you acknowledged thats it!:angel:
Click to expand...
Click to collapse
wow.. igot my thanks back... gave u thanks...:good:
im uploading to dropbox... i have slow internet... i will post it once its up.. if u dont mind...

Problem Flashing a ROM

Hey guys,
I'm currently running Sense-O-Maniac on my HTC Sensation. (I'm completely clueless about 99% of rooting, so if you need more info in order to help me, I'd be glad to get the info for you) I'm attempting to flash ViperS , but I keep getting caught in a boot loop after setup. I'm not sure if I'm missing something, or I'm not compatible with the ROM. Any info would help, Thanks in advance!

Vinny Bacon said:
Hey guys,
I'm currently running Sense-O-Maniac on my HTC Sensation. (I'm completely clueless about 99% of rooting, so if you need more info in order to help me, I'd be glad to get the info for you) I'm attempting to flash ViperS , but I keep getting caught in a boot loop after setup. I'm not sure if I'm missing something, or I'm not compatible with the ROM. Any info would help, Thanks in advance!
Click to expand...
Click to collapse
So you must already be rooted and S-OFF? Sounds like a firmware issue, did you make a nandroid backup before trying to flash ViperS?

goatee84 said:
So you must already be rooted and S-OFF? Sounds like a firmware issue, did you make a nandroid backup before trying to flash ViperS?
Click to expand...
Click to collapse
I do have S-OFF (I used revolutionary months ago, and I've neglected my root ever since)
By a nandroid backup you mean the backup that is under "Backup and Recovery" menu? The ones that are named by the date and time it was done? If so than yes, I have multiple of them.

UPDATE: I just went through the SuperCid process (because to be honest, I don't remember if I've ever done it before. Attempting to flash ViperS now.

Vinny Bacon said:
UPDATE: I just went through the SuperCid process (because to be honest, I don't remember if I've ever done it before. Attempting to flash ViperS now.
Click to expand...
Click to collapse
UPDATE: NOPE, Still caused a boot loop, restoring to the backup made earlier today

Vinny Bacon said:
I do have S-OFF (I used revolutionary months ago, and I've neglected my root ever since)
By a nandroid backup you mean the backup that is under "Backup and Recovery" menu? The ones that are named by the date and time it was done? If so than yes, I have multiple of them.
Click to expand...
Click to collapse
Yep, that's a nandroid. So you've got something to get your phone operational again if necessary. Now that you're superCID I would try installing 3.33 universal firmware from here then reflash ViperS and see what happens. Before you install the firmware double check superCID from bootloader using adb (fastboot getvar cid).
One thing to keep in mind, your nandroid backup will only work with the firmware you were using when you created the backup, so if you wanted to be REALLY careful you could restore your latest nandroid before doing anything else, check firmware version in Settings/About Phone, download a copy of that firmware, THEN try and install new firmware/flash ViperS.
EDIT: Ok just saw your latest post. Since you're restoring a nandroid you can check that firmware version before going any further as mentioned.

goatee84 said:
Yep, that's a nandroid. So you've got something to get your phone operational again if necessary. Now that you're superCID I would try installing 3.33 universal firmware from here then reflash ViperS and see what happens. Before you install the firmware double check superCID from bootloader using adb (fastboot getvar cid).
One thing to keep in mind, your nandroid backup will only work with the firmware you were using when you created the backup, so if you wanted to be REALLY careful you could restore your latest nandroid before doing anything else, check firmware version in Settings/About Phone, download a copy of that firmware, THEN try and install new firmware/flash ViperS.
EDIT: Ok just saw your latest post. Since you're restoring a nandroid you can check that firmware version before going any further as mentioned.
Click to expand...
Click to collapse
I went to Software Information and found:
ANDROID VERSION : 2.3.5
HTC SENSE VERSION: 3.5
Should I still download that 3.3 universal firmware? If so, what do I do once it's downloaded? Do I have to flash it or anything?
UPDATE:
I clicked the link and read through the tutorial. I'm just not sure if it's still necessary to install that 3.3 firmware.

IT WORKED!!! THANK YOU SO MUCH! You were such a great help!

Vinny Bacon said:
I went to Software Information and found:
ANDROID VERSION : 2.3.5
HTC SENSE VERSION: 3.5
Should I still download that 3.3 universal firmware? If so, what do I do once it's downloaded? Do I have to flash it or anything?
UPDATE:
I clicked the link and read through the tutorial. I'm just not sure if it's still necessary to install that 3.3 firmware.
Click to expand...
Click to collapse
There should be another entry under those two you mentioned called Software Number or something similar?
To install firmware, when you boot into bootloader it scans your SD card for PG58IMG file then asks if you want to update. So as long as your firmware file is called PG58IMG.zip it will work.
I glanced at the ViperS thread and it says it's based on 1.11.401.110 RUU, seems that those running the ROM are using the 3.33 firmware.
---------- Post added at 03:56 AM ---------- Previous post was at 03:54 AM ----------
Vinny Bacon said:
IT WORKED!!! THANK YOU SO MUCH! You were such a great help!
Click to expand...
Click to collapse
Great enjoy your new ROM, glad I could help :good:

where can i get a cyanogen mod radio

ive unlocked my phone but it shoe no signal
when i go to the setting to it wont let me search for the network
.will this radio fix things ,if not what will

You can try flashing a radio, but you need to be s-off. Go to kohr-ah's firmware thread and flash 3.33 universal firmware after you are s-off.
Sent from my HTC Sensation

AndroidSupporter318 said:
You can try flashing a radio, but you need to be s-off. Go to kohr-ah's firmware thread and flash 3.33 universal firmware after you are s-off.
Sent from my HTC Sensation
Click to expand...
Click to collapse
so i just download ,follow instructions, and it will work. and this wont change my phone(delete anything)

Yes, It will change your firmware. Make nandroid backup first, and restore after you flash firmware 3.33. Also don't forget to delete that firmware file after you flash the firmware.
It won't delete or change any files or data on your phone.
Sent from my HTC Sensation

blitz100 said:
ive unlocked my phone but it shoe no signal
when i go to the setting to it wont let me search for the network
.will this radio fix things ,if not what will
Click to expand...
Click to collapse
If you are using CM10.1, which I'm guessing that you are, then your problem with the network search is not radio related. It's a known bug in CM10.1
The network search feature doesn't work. To my knowledge it doesn't work on any CM10.1 ROM for any device (I reserve the right to be wrong about that though)
You aren't doing anything wrong. There is nothing you can change to fix it. It has to be fixed in the CM source code.
If you are using CM9 please say so and we'll figure that out.
As for not getting any signal at all though, that may or may not be a different issue entirely. If CM 9 or 10.1 is booting for you (and if you are looking at the settings for it, then you are obviously booting) then you already have the updated firmware as both ROMs will only run on 3.32 or 3.33.
What country are you in and what network on your on?
Also, do you get no signal at all anywhere you go? Or is it just no signal at your house or something?
And if you switch to any other ICS or JB ROM do you get a signal? That's important. If you do then we can rule out a firmware, radio, or hardware issue.
---------- Post added at 01:37 PM ---------- Previous post was at 01:28 PM ----------
AndroidSupporter318 said:
Yes, It will change your firmware. Make nandroid backup first, and restore after you flash firmware 3.33. Also don't forget to delete that firmware file after you flash the firmware.
It won't delete or change any files or data on your phone.
Sent from my HTC Sensation
Click to expand...
Click to collapse
There is no need to restore a nandroid after flsahing Kohr - Ah's firmware packages. They do not replace the ROM.
However, flashing new firmware can screw with the ROM and send it into bootloops. But wiping cache and dalvik from recovery will fix that, if it even happens.

Could he just flash the radio.img by itself by extracting the radio image from the firmware?
Sent from my HTC Sensation

AndroidSupporter318 said:
Could he just flash the radio.img by itself by extracting the radio image from the firmware?
Sent from my HTC Sensation
Click to expand...
Click to collapse
Only if he repackaged it into a new PM58IMG.zip file. But there's no need for all that since Stempox has already done it.
See this post.
http://forum.xda-developers.com/showpost.php?p=26593365&postcount=2
All the Sensastion radios already packaged into flashable PM58IMG.zip's without the rest of the firmware packages.

Skipjacks said:
Only if he repackaged it into a new PM58IMG.zip file. But there's no need for all that since Stempox has already done it.
See this post.
http://forum.xda-developers.com/showpost.php?p=26593365&postcount=2
All the Sensastion radios already packaged into flashable PM58IMG.zip's without the rest of the firmware packages.
Click to expand...
Click to collapse
so i just flash it??

blitz100 said:
so i just flash it??
Click to expand...
Click to collapse
From stempox's thread yes
Sent from my HTC Sensation using xda premium

blitz100 said:
so i just flash it??
Click to expand...
Click to collapse
In boot loader, not in recovery.
Sent from your phone. You should be careful where you leave that thing.

i tried it and it aborted it

...

Skipjacks said:
In boot loader, not in recovery.
Sent from your phone. You should be careful where you leave that thing.
Click to expand...
Click to collapse
how do i do that

blitz100 said:
how do i do that
Click to expand...
Click to collapse
put the pg58img.zip in the root of the sdcard
then boot into bootloader
it will search for that zip and recognize it
it will ask you to do the update
but wait for Skipjacks to confirm it
i don't know much about radio/rils(i said the above because these are the steps that requires when you are flashing firmware)

rzr86 said:
put the pg58img.zip in the root of the sdcard
then boot into bootloader
it will search for that zip and recognize it
it will ask you to do the update
but wait for Skipjacks to confirm it
i don't know much about radio/rils(i said the above because these are the steps that requires when you are flashing firmware)
Click to expand...
Click to collapse
You don't need me. You are right!
But, check the md5 sum first after you download the pm58img.zip file. Check it against the on listed under the download link in Stempox's thread. If they don't match delete the file you downloaded and do not proceed.
Sent from your phone. You should be careful where you leave that thing.

[Q] HTC one S brick

Hello,
I'm new here but today I tried to root my phone and put CM10 on it. Rooting was not that hard but with flashing the rom I had some problems. I used a tutorial from youtube "Htc One s jellybean 4.2.2 Nightly Cm10.1 Rom" and did everything as he said but when I tried to boot CM it came in a boot loop so I restored my backup and everything was back normal again. But I thought i'll give it another try so I did that and it still didn't work so I restored (via recovery) and at the end it said: It appears your phone isn't rooted do you wanna do it now...(or something like that)? I found that a bit strange but I clicked yes but now if I boot up my phone first you just see "HTC - quietly brilliant" and then the red letters come beneath it saying its a developers version. I Couldn't do anything so I jumped into my bootloader and did factory reset but now everything is gone and I still have that booting problem,
I can acces bootloader and recovery mode but that's it
I really need my phone soon and don't have much time to look on the internet for solutions so could you please help me?
Thanks in advance!!
Lennard

Do you have the RUU for your phone? Maybe that would be the quick fix to take it back to stock. You can use an RUU that's equal or newer than what you have currently.
BTW: I went through this as well.

808phone said:
Do you have the RUU for your phone? Maybe that would be the quick fix to take it back to stock. You can use an RUU that's equal or newer than what you have currently.
BTW: I went through this as well.
Click to expand...
Click to collapse
I don't even know what that it >.< (sorry for being noob )

Did you flash boot.img with cm10
Sent from my One S

ka_55 said:
Did you flash boot.img with cm10
Sent from my One S
Click to expand...
Click to collapse
Jep, as instructed in the youtube video

Which hboot version and radio?
Cm10 uses 3.4.x kernel, it won't boot with old firmware
Sent from my One S

ka_55 said:
Which hboot version and radio?
Cm10 uses 3.4.x kernel, it won't boot with old firmware
Sent from my One S
Click to expand...
Click to collapse
Hboot : 2.15.000
Radio : 1.15.50.05.29

Then it can be a bad download. If not I I'm out of ideas
Sent from my One S

Do you remember doing any of the following?
-wipe data/factory reset
-wipe dalvik cache
I think that was my problem that I didn't wipe the cache completely. Possibly a bad download too. Do a search on md5. It's basically a check to see if your download is ok before flashing.
As far the RUU is concerned, it will take you back to stock. You will need the info that appears when you start the phone up by holding down VOL DOWN and POWER. Hold down volume down, then press the power for a second or 2. Then it will boot up into HBOOT.
Write down the info that appears and search for a matching RUU equal or newer.
What is the carrier???

808phone said:
Do you remember doing any of the following?
-wipe data/factory reset
-wipe dalvik cache
I think that was my problem that I didn't wipe the cache completely. Possibly a bad download too. Do a search on md5. It's basically a check to see if your download is ok before flashing.
As far the RUU is concerned, it will take you back to stock. You will need the info that appears when you start the phone up by holding down VOL DOWN and POWER. Hold down volume down, then press the power for a second or 2. Then it will boot up into HBOOT.
Write down the info that appears and search for a matching RUU equal or newer.
What is the carrier???
Click to expand...
Click to collapse
I did the factory reset, dalvik cache and cache wipe. When I tried to install CM it indeed said unable to find md5 or something like that.
I think I have a europe version and looked for fitting RUU but the numbers are completely different maybe you could find a good RUU? (See attachement) Btw I have S4/Ville/Z520e

CID
Could you please read out your CID? Then we can get right RUU.
You can do this by booting your One S into fastboot mode and use the toolkit from the link:
http://forum.xda-developers.com/showthread.php?t=2471151

LS.xD said:
Could you please read out your CID? Then we can get right RUU.
You can do this by booting your One S into fastboot mode and use the toolkit from the link:
http://forum.xda-developers.com/showthread.php?t=2471151
Click to expand...
Click to collapse
I don't know if this is it but it says CID: HTC__E11

Lennardude said:
I don't know if this is it but it says CID: HTC__E11
Click to expand...
Click to collapse
yes thats it
This should be the right RUU http://www.androidruu.com/getdownload.php?file=Ville/RUU_Ville_U_JB_45_S_HTC_Europe_3.16.401.8_Radio_1.11.50.05.28_10.27.50.08L_release_301814_signed_2_4.exe
MAY anyone who reads this confirm it? Just to be safe at all.
btw. "HTC_E11" = unbranded Netherlands
Due to you're S-ON you will have to relock your bootloader to perform a RUU update.
Here you can find a step by step RUU guide by "Flashalot" http://forum.xda-developers.com/showthread.php?p=51016251

LS.xD said:
yes thats it
This should be the right RUU http://www.androidruu.com/getdownload.php?file=Ville/RUU_Ville_U_JB_45_S_HTC_Europe_3.16.401.8_Radio_1.11.50.05.28_10.27.50.08L_release_301814_signed_2_4.exe
MAY anyone who reads this confirm it? Just to be safe at all.
btw. "HTC_E11" = unbranded Netherlands
Due to you're S-ON you will have to relock your bootloader to perform a RUU update.
Here you can find a step by step RUU guide by "Flashalot" http://forum.xda-developers.com/showthread.php?p=51016251
Click to expand...
Click to collapse
Should I first relock my bootloader and follow the tutorial to flash that RUU of vice versa?

Lennardude said:
Should I first relock my bootloader and follow the tutorial to flash that RUU of vice versa?
Click to expand...
Click to collapse
For RUU you need stock recovery and "locked" BL. Please read the guide again and only proceed, if you're sure you got it.
Another question:
You said you got a working recovery? Which version do you use? And have you tried install another custom rom.zip? That would be more easy and safe to you. May be your storage got corrupted and thats why your phone crashed and you can't install the rom.zip stored on the sd-card. You could connect the phone to your pc as mass storage via recovery, format it and put a new customrom.zip on it. By the way, why you installed such an old rom? You can use CM11 for sure

LS.xD said:
For RUU you need stock recovery and "locked" BL. Please read the guide again and only proceed, if you're sure you got it.
Another question:
You said you got a working recovery? Which version do you use? And have you tried install another custom rom.zip? That would be more easy and safe to you.
Click to expand...
Click to collapse
In that guide it doesn't say anything about a relocked bootloader.
I do have a working recovery but how can I get a zip file on it? I can't acces the files of my phone in windows explorer or something like that. Also I don't know if I have a stock recovery but if I don't I have to install that via a zip but how can I get that on my phone...?

Lennardude said:
In that guide it doesn't say anything about a relocked bootloader.
I do have a working recovery but how can I get a zip file on it? I can't acces the files of my phone in windows explorer or something like that. Also I don't know if I have a stock recovery but if I don't I have to install that via a zip but how can I get that on my phone...?
Click to expand...
Click to collapse
PLS boot in recovery mode and tell me what "version" it is You should find it. If you're not sure about it, you can flash a new recovery before installing a rom. Whe you have a working custom recovery you can mount your sd-card to your computer via recovery.
Found the RUU guide i had in mind http://forum.xda-developers.com/showthread.php?t=2501542

LS.xD said:
PLS boot in recovery mode and tell me what "version" it is You should find it.
Click to expand...
Click to collapse
v2.6.0.0

Lennardude said:
v2.6.0.0
Click to expand...
Click to collapse
that is TWRP. My suggestion ist installing the latest Recovery and try install CM11. I just get the links for you.

LS.xD said:
PLS boot in recovery mode and tell me what "version" it is You should find it. If you're not sure about it, you can flash a new recovery before installing a rom. Whe you have a working custom recovery you can mount your sd-card to your computer via recovery.
Found the RUU guide i had in mind http://forum.xda-developers.com/showthread.php?t=2501542
Click to expand...
Click to collapse
The problem is, we're talking about an HTC One S which DOESN"T have a SD Card slot...

[ROM][M4 - 2.12.401.1] Official Stock Android 4.3 Sense 5.5 Nand Back Up

Hi ...
After Many Try i build Nand Back Up From Official Stock Android 4.3 Sense 5.5 - 2.12.401.1 :angel:
Any Body Want Back To Stock
You Must Be S-off, Dev-Unlock, Have TWRP Recovery, Hboot 2.22
Download All Part, Extract Them, Copy Final Folder To phone Storage, Wipe Factory, Cache, Dalvik
Next Select Restore, From Back Up Sub Menu
After Restore, Reboot Bootloader, Find boot.emmc.win in Extracted Folder
Code:
fastboot flash boot boot.emmc.win
Flash Stock Recovery
Code:
fastboot flash recovery recovery.img
Then Relock Your Phone.
After All, reboot Phone And let Phone Boot Noramaly.
Now Update Your Phone Via Setting Menu. :laugh:
Official Stock Android 4.3 Sense 5.5 Nand Back Up
Don't Forget Hit thanks

Does it hv all apps like soundhound flash light etc?

harib12 said:
Does it hv all apps like soundhound flash light etc?
Click to expand...
Click to collapse
Flash light, Sound Recorder,etc,...Yes !!!
But Sound Hound Not Available in official sense 6 !!!

Can you share these missing apps sense 5.5 which are removed when we unlock bootloader. sound hound is available in sense 5 @jack15381

is this internatinal or AT&T version?

romy134 said:
is this internatinal or AT&T version?
Click to expand...
Click to collapse
International(WWE-401)

jack15381 said:
International(WWE-401)
Click to expand...
Click to collapse
Aww any idea where I can get a at&t nand 5.5.. Need it for warranty

jack15381 said:
International(WWE-401)
Click to expand...
Click to collapse
it only have seven digital nothing else no calculator no flashlight no soundhound

harib12 said:
it only have seven digital nothing else no calculator no flashlight no soundhound
Click to expand...
Click to collapse
After install it, update via ota. Every thong came back

jack15381 said:
After install it, update via ota. Every thong came back
Click to expand...
Click to collapse
your backup is pretty old can i also have same files?

harib12 said:
your backup is pretty old can i also have same files?
Click to expand...
Click to collapse
Your mean ota files ?

And software update demoting me to up[date 4.4.2
i have 4.4.3 backup acan i install it like ur backup

harib12 said:
And software update demoting me to up[date 4.4.2
i have 4.4.3 backup acan i install it like ur backup
Click to expand...
Click to collapse
huh?

jack15381 said:
huh?
Click to expand...
Click to collapse
ota is of 4.4.2 simple not sense 6? its an kit kat update

harib12 said:
ota is of 4.4.2 simple not sense 6? its an kit kat update
Click to expand...
Click to collapse
First update improve 4.3
After that 4.4.2 with sense 5.5
And At last 4.4.2 with Sense 6

When I click on Restore from TWRP I don't have anything to select from. The files are copied to the internal storage, did a factory wipe.. nothing. Please help
Using TWRP 2.7.1.1
Edit:
I made a backup with TWRP and saw it made it in another folder.. moved your nandroid backup to that folder and it's shown Thanks!
Edit 2:
It showed as failed and couldn't boot. I'm restoring my old backup now to see what's wrong.. It might've not copied correctly.. I don't know ;/ Will continue to update this post
Edit 3:
I saw it hasn't copied itself correctly 'cause I did move them through the phone's file manager
Edit 4:
After successfully restoring, I can't access fastboot to flash boot and recovery.. I saw that TWRP automatically flashes boot from the restore, so I don't think that's needed. But for the recovery, I'll try later.. right now I've booted up the phone and it started without a problem. Didn't ask for any setup though.. I'll try adb reboot bootloader now and flash boot and recovery, then lock it again.. if it works, I might just format everything and do a clean install
--
The fastboot still won't work, the PC doesn't recognize it at all... ;/ It just shows 'USB Device not recognized' popup and that's all -_-

Peshyy said:
When I click on Restore from TWRP I don't have anything to select from. The files are copied to the internal storage, did a factory wipe.. nothing. Please help
Using TWRP 2.7.1.1
Edit:
I made a backup with TWRP and saw it made it in another folder.. moved your nandroid backup to that folder and it's shown Thanks!
Edit 2:
It showed as failed and couldn't boot. I'm restoring my old backup now to see what's wrong.. It might've not copied correctly.. I don't know ;/ Will continue to update this post
Edit 3:
I saw it hasn't copied itself correctly 'cause I did move them through the phone's file manager
Edit 4:
After successfully restoring, I can't access fastboot to flash boot and recovery.. I saw that TWRP automatically flashes boot from the restore, so I don't think that's needed. But for the recovery, I'll try later.. right now I've booted up the phone and it started without a problem. Didn't ask for any setup though.. I'll try adb reboot bootloader now and flash boot and recovery, then lock it again.. if it works, I might just format everything and do a clean install
--
The fastboot still won't work, the PC doesn't recognize it at all... ;/ It just shows 'USB Device not recognized' popup and that's all -_-
Click to expand...
Click to collapse
your phone is in the fastboot mode Or Normal Mode ?

jack15381 said:
your phone is in the fastboot mode Or Normal Mode ?
Click to expand...
Click to collapse
It wasn't working because of a faulty HBOOT.. I got it fixed but I didn't know it was faulty.. Flashed firmware, flashed stock recovery, added that faulty HBOOT again because it removes red text and makes *RELOCKED* show as *LOCKED* and other tiny stuff.. Now I'm with locked bootloader, stock recovery, faulty HBOOT and no way out of this situation

jack15381 said:
Hi ...
After Many Try i build Nand Back Up From Official Stock Android 4.3 Sense 5.5 - 2.12.401.1 :angel:
Any Body Want Back To Stock
You Must Be S-off, Dev-Unlock, Have TWRP Recovery, Hboot 2.22
Download All Part, Extract Them, Copy Final Folder To phone Storage, Wipe Factory, Cache, Dalvik
Next Select Restore, From Back Up Sub Menu
After Restore, Reboot Bootloader, Find boot.emmc.win in Extracted Folder
Code:
fastboot flash boot boot.emmc.win
Flash Stock Recovery
Code:
fastboot flash recovery recovery.img
Then Relock Your Phone.
After All, reboot Phone And let Phone Boot Noramaly.
Now Update Your Phone Via Setting Menu. :laugh:
Official Stock Android 4.3 Sense 5.5 Nand Back Up
Don't Forget Hit thanks
Click to expand...
Click to collapse
Thanks for the back up!
I restored this backup and flashed the boot, recovery and relocked the bootloader..but when i boot into the rom it says no updates available?
I want to stock my phone up as i want to sell it on to retailer.
Please advise on what to do.

Check out the third post in this thread, it contains everything you need: http://forum.xda-developers.com/showthread.php?t=2851886
Seeking assistance to return to stock ROM
I followed it and went from a EE-branded running Android 4.3, to a fully stock, unrooted Android 4.4.2 and Sense 6 and on HTC's own release channel. Best thing is you can leave as Super CID and S-off and when you come to sell it, change both with a couple of basic fastboot commands. Or easily re-root it again and use a custom rom, should you feel inclined.