Related
Hi,
I have followed everything in this thread http://forum.xda-developers.com/showthread.php?t=1837863
I have backups nandroid ready and wasn't too sure, if I dont like this build then i could restore back to stock using CWM? or Odin.
I felt that I need to wait for reply to comfirm before flashing this cyanogenMOD 10.
Thanks!
LeonKnight12 said:
Hi,
I have followed everything in this thread http://forum.xda-developers.com/showthread.php?t=1837863
I have backups nandroid ready and wasn't too sure, if I dont like this build then i could restore back to stock using CWM? or Odin.
I felt that I need to wait for reply to comfirm before flashing this cyanogenMOD 10.
Thanks!
Click to expand...
Click to collapse
IF my memory serves me right, with an unlocked bootloader, you can recover to a TW rom but I think its needs to either have the kernel built into it OR you need to somehow flash to a TW kernel. I say this because I think that if your kernel is still an AOSP one, then the device will not boot up.
some roms already come with a kernel for their rom so I think in most cases, with CWM 6.0.1.x, you could restore a TW nandroid.
If you want to restore a backup of a TouchWiz rom you have then just use the EZ Recovery app to flash the hybrid (CWM/Kexec) recovery...reboot to recovery and restore your nandroid. Simple process!
Once the Dev's building TW roms start using the non-kexec flashing method then you will be able to restore using the normal CWM recovery. Just like you said, you can also use ODIN to restore to stock but it's a pain because you have to root all over again. Just know you have a few options.
Ok thanks everyone!
So good
Fwiw... I've been switching back and forth between Synergy and CM for a couple days now (flashing multiple times) and cwm touch works for synergy but u need new cwm for CM10.
Hope this helps.
Hi!
I just bought Nexus S i9023 and don't know how to start flashing roms, kernels etc. I was reading about that I must unlock bootloader first, flash cwm recovery and then i can finally flashing roms. Is it right? I have few questions about this device, here they are:
1. How are kernels flash? Is it flashing by recovery like update.zip?
2. I have Gingerbread currently, but I want to update to JB, can I first off apply the update in recovery or I have to update to ICS first? Can you provide me a link to updates?
3. http://android.clients.google.com/packages/ota/google_crespo/9ZGgDXDi.zip this is JellyBean for i9023, right?
4. What are the kernel and rom combo most stable and fast?
5. Internal memory is working like a SD card, so if I will make a nandroid backup, it will not erase my data while doing full wipe ... ?
6. I'm currently using my private MIUI GB on my Xperia X8, which was ported from SGS. Is there any multilanguage MIUI GB rom anywhere?
7. Which is the flashing order? Kernels first? Or roms?
Thanks for replies, guys!
:cyclops:
Yes, you must unlock the bootloader, which will wipe EVERYTHING on your phone before you can flash your desired recovery and root. Kernels are flashed through recovery, after a ROM is flashed, otherwise it will generally be overwritten if a new ROM is flashed. No need to go to ICS to get to jb if you are flashing a full ROM. The memory referred to as internal is not what is used as an SD card. The SD/USB memory is the external memory. A nandroid doesn't back this up.
Sent from my ns4g using Tapatalk 2
p1gp3n said:
Yes, you must unlock the bootloader, which will wipe EVERYTHING on your phone before you can flash your desired recovery and root. Kernels are flashed through recovery, after a ROM is flashed, otherwise it will generally be overwritten if a new ROM is flashed. No need to go to ICS to get to jb if you are flashing a full ROM. The memory referred to as internal is not what is used as an SD card. The SD/USB memory is the external memory. A nandroid doesn't back this up.
Sent from my ns4g using Tapatalk 2
Click to expand...
Click to collapse
I just picked up a secondhand i9020T. It's running stock jelly bean, but it looks like the previous owner had some custom ROMs installed. The bootloader is unlocked and clockwork mod recovery is installed. I don't seem to have root access. Can I just flush a full ROM, like CM10 through clockwork even though I don't have root access? Will doing that provide root in CM10, or is that going to cause a problem. Thanks.
naguziew said:
I just picked up a secondhand i9020T. It's running stock jelly bean, but it looks like the previous owner had some custom ROMs installed. The bootloader is unlocked and clockwork mod recovery is installed. I don't seem to have root access. Can I just flush a full ROM, like CM10 through clockwork even though I don't have root access? Will doing that provide root in CM10, or is that going to cause a problem. Thanks.
Click to expand...
Click to collapse
You might could get by just flashing cm10 and gapps, but I would start by flashing superuser, or super su for jb.
Sent from my ns4g using Tapatalk 2
Yo, thanks, I successfully unlocked my bootloader and flashed cwm, then installed fresh miui jb and gapps. I searching for good kernel for daily usage, with good performance, can you recommend me any?
cheers
p1gp3n said:
You might could get by just flashing cm10 and gapps, but I would start by flashing superuser, or super su for jb.
Sent from my ns4g using Tapatalk 2
Click to expand...
Click to collapse
So i'm a little confused. The stock rom as of now has the superuser app, but when I open something that tried to pull root access (titanium backup or root checker for example) the superuser app does not come up, and root access is not available. Thoughts? When I flashed ROMs on my old transform, root seemed to travel with the kernel - but I just want to make sure I can flash a rooted ROM+kernel through recovery without having root access. Sorry if these questions are a bit naive - I'm trying to work through the other guides and Q+A to try to figure this out, but I'm still not clear. Also, sorry for sort of hijacking your thread, but the topic seemed like a good fit. Thanks in advance for all help.
*Edit - Fixed root access in stock rom by flashing new SU app through CWM from link posted in second post of this thread: http://forum.xda-developers.com/showthread.php?t=1918490&highlight=have+clockworkmod+but+no+root
Last question, if I flashed JellyBean based rom, can I flash Gingerbread based by following the steps like formatting system etc. in recovery previously?
The su app from the play store is just an app. as you found, flashing the su zip is the only way to actually get the su access.
Anytime you flash a new rom, it is highly recommended that you perform a full wipe, after making a nandroid, of course. The steps I follow are factory reset/data wipe (this will also take care of cache & dalvic cache since they are on the data partition) then go to mind and storage to format /system & /boot.
If you haven't already I suggest using titanium backup & the pro key if you can. I have it set to automatically backup everything every 2 days, and I also make a new one each time I get ready to flash anything. Don't restore any system apps per data off you change roms though. The only reason I backup the system stuff is so I can restore my texts & call log with the proper time stamps.
Sent from my ns4g using Tapatalk 2
So I just rooted my Verizon Galaxy S3 and unlocked the bootloader. I flashed Clockworkmod recovery using Rom Manager to update to the latest version. Made a nandroid, installed Titanium Backup, linked it to my Dropbox and uploaded. I downloaded the latest CM10 nightly to flash but the stock android recovery appeared instead of CWM. Found some info that I need to flash a clockwork compatible kernel first. The questions I have are: If I install the latest CM 10 nightly will it automatically install a clockwork compatable kernel? If not, where can I download it from? and if I do need to flash a kernel first can anyone give me detailed instructions how to do this as i'm relatively new to this stuff and don't want to brick my phone. Thanks, any info would help.
iwearthebelt said:
So I just rooted my Verizon Galaxy S3 and unlocked the bootloader. I flashed Clockworkmod recovery using Rom Manager to update to the latest version. Made a nandroid, installed Titanium Backup, linked it to my Dropbox and uploaded. I downloaded the latest CM10 nightly to flash but the stock android recovery appeared instead of CWM. Found some info that I need to flash a clockwork compatible kernel first. The questions I have are: If I install the latest CM 10 nightly will it automatically install a clockwork compatable kernel? If not, where can I download it from? and if I do need to flash a kernel first can anyone give me detailed instructions how to do this as i'm relatively new to this stuff and don't want to brick my phone. Thanks, any info would help.
Click to expand...
Click to collapse
Did you unlock your bootloader? for a custom recovery to stick you need to unlock your bootloader. Follow this guide
http://forum.xda-developers.com/showthread.php?t=1762709
darkhawk3383 said:
Did you unlock your bootloader? for a custom recovery to stick you need to unlock your bootloader. Follow this guide
http://forum.xda-developers.com/showthread.php?t=1762709
Click to expand...
Click to collapse
I did, had it unlocked and rooted. I guess there was some sort of issue with Rom Manager on the S3. I use it on my Galaxy Nexus and have no issues. I ended up abandoning what I was doing, uninstalling Rom Manager and going a different route. I have no prior experience with Odin but figured out how to install CWM . Downloaded I535vrblk1, flashed CWM, unlocked & rooted again. . Thanks anyway for the reply.
You can reinstall ROM Manager. It is something to do with some of the newer OTA's and the leaks. I have read a few posts in the forums about this in the GS3 and I really can't remember the fix but your recovery not sticking had nothing to do with ROM Manager. I think the fix was when you rebooted to recovery to flash a kernel right away, whether it be KT747, LK, or any of the other. Now that I typed this I'm about 99% sure that was the fix. Like I said above though, it has nothing to do.with ROM Manager, so if you're like me and find a lot of the tools in it handy you should be able to reinstall it. If you have a problem again just flash a kernel.
Sent from one of the many Anthropomorphic Personalities on the Disc
I am trying to update my Radio/modem file with the JB Android 4.3 Radio file. It requires that I install CWM 6.0.3.7. Can I install this alongside my TWRP 2.6.3.0 installation or as I have read, it will overwrite my TWRP recovery mode? If it will overwrite, how do I switch between? Just reflash through ODIN using PDA? That seems like a lot of work and the possibilities of breaking might be high just overwriting Customer Recoveries?
If I would install this JB Radio for Android 4.3, how would I go back to GB? I can't find a single GB Radio/Modem. Could I use Radio files for GB instead of wiping and installing stock GB ROM [No Root, No Custom Recovery, but it includes the GB Radio/modem]. The reason I am worried about this, if I need to load my original stock GB 2.3.6 backup with root from my nandroid, I would need the original GB Radio and the nandroid backup/restore feature doesn't include that. All advice is greatly appreciated.
The Radio Does Not Get Backed Up By Cwm/twrp Backup(nandroid) Method.
Click to expand...
Click to collapse
[RADIO][UCMC1] For I727/I727R [09-APR-2013]
http://forum.xda-developers.com/showthread.php?t=2228292
[Q] I have CWM and TWRP installed, is that OK?
http://forum.xda-developers.com/showthread.php?t=2122152
[ROM][ics][uclf5] •∞ EMBRYO •∞ 4.1 •∞ [08-jul-2012] [It has ICS radio files, but no GB files]
http://forum.xda-developers.com/showthread.php?t=1754473
Just flash it with twrp. It'll work just like if you did it with cwm.
I have read that some of the zip files does work with TWRP as well. However I am interested in using the following Custom Rom [SuperLite AOKP JB 4.3 v1.0]. That installation requires CWM 6.0.3.7, because it will prevent the infamous black screen reboot issue. What about GB radio file & installing on top of or installing side by side TWRP & CWM?
[ROM][AOKP]SUPERLITE AOKP JB 4.3 V1.0| BYO | SLgapps | SEPT 30/13
http://forum.xda-developers.com/showthread.php?p=46066949
Pick a recovery and use it. Backups are not cross compatible. If you make a backup with cwm it won't work with twrp.
You can flash radios with either. Just pick one.
Sent from my HTC One using Tapatalk 4
lowao said:
I have read that some of the zip files does work with TWRP as well. However I am interested in using the following Custom Rom [SuperLite AOKP JB 4.3 v1.0]. That installation requires CWM 6.0.3.7, because it will prevent the infamous black screen reboot issue. What about GB radio file & installing on top of or installing side by side TWRP & CWM?
[ROM][AOKP]SUPERLITE AOKP JB 4.3 V1.0| BYO | SLgapps | SEPT 30/13
http://forum.xda-developers.com/showthread.php?p=46066949
Click to expand...
Click to collapse
If you have not already installed a 4.3 ROM, then you are recommended (nay, required) to use CWM 6.0.3.7 to do the initial wipe and install, after that you can switch to TWRP for any flashing after that.There is something that 6.0.3.7 does to the data partition that TWRP doesn't, on the initial setup. Once that is done, it doesn't matter. Flash the JB radio when you flash the 4.3 ROM. And going back to GB if you need to is fairly simple, just follow Vincom's guide. There are lots of flashable zips of GB radios you can use.
I am still a bit confused regarding TWRP & CWM being installed at the same time or side by side. So, let me get this straight. If I want to install JB 4.3 ROM, I must first boot into ODIN, install CWM through ODIN, reboot, boot into CWM, wipe the system, reboot, boot back into ODIN, install TWRP, reboot, boot into TWRP, install the JB 4.3 ROM, and finally preform the last reboot. Is this correct & it won't break either of the custom recoveries? However rpr69 said "switch back to TWRP." Are you inferring TWRP & CWM can be installed side by side? If so, how do I access one over the other?
Regarding GB's radio files:
Which of the following links is the Radio/modem files? Is it the second one? I know of them is the official stock ROM and the other requires the OTA updates. However the poster didn't include the OTA updates yet...
ATT-UCLI3-odexed-cwm.zip http://d-h.st/rDZ
kernel-ucli3-sgh-i727-RD01-cwm.zip http://d-h.st/QfR
[ROM][ICS][UCLI3][09-NOV-2012] Stock odexed & deodexed UNTOUCHED
http://forum.xda-developers.com/showthread.php?t=1982467
Try this, wipe cache and dalvik.....no promises lol [Link is dead.]
https://dl.dropbox.com/u/60567424/modem-UCLI3.zip
http://forum.xda-developers.com/showpost.php?p=33344009&postcount=22
Sadly no link for UCLI3 [GB's Radio files.]
[ROM][ics][uclf5] •∞ EMBRYO •∞ 4.1 •∞ [08-jul-2012]
http://forum.xda-developers.com/showthread.php?t=1754473
The 1Stop post from Vincom:
http://forum.xda-developers.com/showthread.php?t=1785999
Sadly there are no more links for GB / UCLI3 radio files.
I know you posted but its confusing, let me simplify, I hope:
im assuming you have either cwm or twrp installed, if on stock read this.
you cannot have two recoveries installed at the sametime:
recovery install procedure:
if not on cwm6037 flash cwm6037 with what ever recovery you have now and reboot back into recovery.
then flash any custom jb4.3 rom, preferably latest cm10.2 nightly found here and reboot rom at least twice.
if you like cwm 6037 stay with it, I don't, or else just flash twrp 2.6.3.0 w/cwm 6037 and reboot back into recovery or rom.
now you can just stay w/the cm10.2 nightly you flashed with cwm 6037 or flash any other rom w/twrp 2.6.3.0 which is now your installed recovery.
that's it you should not have the reboot problems on any jb4.3 roms.
Click to expand...
Click to collapse
Click to expand...
Click to collapse
above recovery install procedure is only if a jb4.3 rom on its 2nd reboot just has a black screen and wont boot into rom, but 2nd boot does usually take longer than normal upto a full minute.
if flashing a rom or restoring from nandroid(recovery backup) prior to jb4.3 and then later decide to flash a jb4.3 rom you need todo above recovery installation procedure b4 flashing a jb4.3 rom.
restoring backups only work with whatever recovery they were made with, you cannot restore a cwm backup w/twrp recovery and vice a versa.
newest versions of recoveries should restore backups made with their older versions.
why do u want an old radio, they will not work w/jb roms
old radios are linked in the 1stop sticky under "old stuff".
installing the radio has nothing todo with the recovery you are using.
flash jb radios for jb roms which happen to be all the current roms.
reread the radio section in the 1stop sticky.
I linked this post in the recovery section of the 1stop sticky
Thank you vincom for explaining the process of using both CWM 6.0.3.7 & TWRP 2.6.3.0 together. I am familiar with backups ONLY working with their original customer recovery. I didn't even think about older versions of backups (not) working with newer custom recoveries. Was there an issue working with older backups in the past?
The reason I need the old GB Radio/Modem files, because when I have to return the phone to stock & load up my old Gingerbeard nandroid, I will be able to return it back to AT&T with the original Radio files and the original Gingerbeard OS. Anywho, thank you for the GB radio. I really appreciate it!
lowao said:
Thank you vincom for explaining the process of using both CWM 6.0.3.7 & TWRP 2.6.3.0 together. I am familiar with backups ONLY working with their original customer recovery. I didn't even think about older versions of backups (not) working with newer custom recoveries. Was there an issue working with older backups in the past?
The reason I need the old GB Radio/Modem files, because when I have to return the phone to stock & load up my old Gingerbeard nandroid, I will be able to return it back to AT&T with the original Radio files and the original Gingerbeard OS. Anywho, thank you for the GB radio. I really appreciate it!
Click to expand...
Click to collapse
u can return any phone that has any stock firmware, with our phones that would be stock jb4.1.2 and using odin would be the way to do it , link in my sig. this is assuming your carrier used the latest firmware as with att and rogers.
I am with AT&T and I never got the official ICS or JB through updates. Actually, I thought ICS was discontinue, because it was bricking phones. Thus the stock ICS & JB Roms here were ported over?
lowao said:
I am with AT&T and I never got the official ICS or JB through updates. Actually, I thought ICS was discontinue, because it was bricking phones. Thus the stock ICS & JB Roms here were ported over?
Click to expand...
Click to collapse
these are untouched full official stock firmwares( radio, recovery, kernel and apps/bloatware), just use odin and flash whatever version you want, all info is in the restore to stock sticky
lowao said:
I am with AT&T and I never got the official ICS or JB through updates. Actually, I thought ICS was discontinue, because it was bricking phones. Thus the stock ICS & JB Roms here were ported over?
Click to expand...
Click to collapse
nope, both are fine and are still available officially. You don't need gingerbread to return it.
Sent from my HTC One using Tapatalk 4
I have to go to Samsung's website and download their Kies software to upgrade to Jelly Bean right? It won't be pushed out through Settings > About Phone > System Update then?
Or you can use Odin.
Sent from my HTC One using Tapatalk 4
So if you're flashing 4.3 ROMs just use cwm? Went from twrp to cwm and back to twrp and am getting the same black boot screen on a slim 4.3 weekly.
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
beachmiles said:
So if you're flashing 4.3 ROMs just use cwm? Went from twrp to cwm and back to twrp and am getting the same black boot screen on a slim 4.3 weekly.
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
Click to expand...
Click to collapse
To properly set everything up, you need to use the recommended CWM for 4.3, do a full factory wipe, and make sure that data is formatted. Then install the ROM and boot it up. Reboot to verify it works properly. Then you can go to TWRP 2.6.0.1 or later.
I've been using twrp since release and not had any issues why do we need cwm? What's the technical reasoning.
Sent from my XT1080 using Tapatalk
Didn't work
I followed this procedure exactly and it still didn't work.
I gave it ten minutes between boots and ended up having to pull the battery each of the three times I rebooted.
Fortunately I've gotten into the habit of making a backup before flashing, so it was just a loss of 45 minutes of my evening.
I was trying to get the latest CM10.2 Stable build. Has anyone gotten this thing to flash and work as well as 10.1.3 RC2 or 10.1.3 Final? This issue started for me with the second 10.2 Nightly.
...
Just NOW began seeing the replies to the main post. I don't have ANOTHER fresh install in me: I've already had to do that twice with the 2012 Nexus7 and once with the Skyrocket in the last six weeks.
Hey Everyone!
Ok, so just over 3 weeks ago I had my S3 flashed to PagePlus because I thought I was in a little over my head to attempt on my own. 2 days ago I was under the impression flashing and interchanging between roms was safe. I rooted, installed TWRP, and flashed CM11. I broke my flash and I believe it was because I wiped. I reverted back to JB 4.1.2 from my Nandroid backup and my flash was still broke. Can someone please tell me if I should only wipe Dalvik, or what I should do so I don't break my flash again. At $40-50 it gets very expensive to continue re-flashing to PP. If there is only certain roms to flash could you please list them? Thanks in advanced everybody!
-vizion
vizion98 said:
Hey Everyone!
Ok, so just over 3 weeks ago I had my S3 flashed to PagePlus because I thought I was in a little over my head to attempt on my own. 2 days ago I was under the impression flashing and interchanging between roms was safe. I rooted, installed TWRP, and flashed CM11. I broke my flash and I believe it was because I wiped. I reverted back to JB 4.1.2 from my Nandroid backup and my flash was still broke. Can someone please tell me if I should only wipe Dalvik, or what I should do so I don't break my flash again. At $40-50 it gets very expensive to continue re-flashing to PP. If there is only certain roms to flash could you please list them? Thanks in advanced everybody!
-vizion
Click to expand...
Click to collapse
Go here http://forum.xda-developers.com/showthread.php?t=2605733 and ask this guy cjmcsw87, he knows how to address your issue.
Ok I will pm him. Thanks for referring me to the thread. Definitely want to clarify this before attempting to flash again.
Sent from my SCH-I535 using xda app-developers app
Bump. Still looking for help
Sent from my SCH-I535 Flashed to PagePlus
vizion98 said:
Bump. Still looking for help
Sent from my SCH-I535 Flashed to PagePlus
Click to expand...
Click to collapse
Try to install this recovery and use it to flash http://forum.xda-developers.com/showthread.php?t=2201860
vizion98 said:
Hey Everyone!
Ok, so just over 3 weeks ago I had my S3 flashed to PagePlus because I thought I was in a little over my head to attempt on my own. 2 days ago I was under the impression flashing and interchanging between roms was safe. I rooted, installed TWRP, and flashed CM11. I broke my flash and I believe it was because I wiped. I reverted back to JB 4.1.2 from my Nandroid backup and my flash was still broke. Can someone please tell me if I should only wipe Dalvik, or what I should do so I don't break my flash again. At $40-50 it gets very expensive to continue re-flashing to PP. If there is only certain roms to flash could you please list them? Thanks in advanced everybody!
-vizion
Click to expand...
Click to collapse
Have you resolved this issue? I too recently had my S3 flashed to PP while on Scott's CleanROM Seven http://forum.xda-developers.com/showthread.php?t=1832070. (pretty much a stock debloated ROM based on the latest Verizon released VRBMF1 Jellybean 4.1.2). I would like to try his latest CleanRom8 (based on 4.3), but I don't want to lose my PP flash.
Do you (or anyone else) know what should be backed up or omitted to prevent losing my PP settings?
buhohitr said:
Try to install this recovery and use it to flash http://forum.xda-developers.com/showthread.php?t=2201860
Click to expand...
Click to collapse
I'm currently on TWRP v2.6.3.1, would the PhilZ recovery in your link be better?
Regards - FG
fathergweedo said:
Have you resolved this issue? I too recently had my S3 flashed to PP while on Scott's CleanROM Seven http://forum.xda-developers.com/showthread.php?t=1832070. (pretty much a stock debloated ROM based on the latest Verizon released VRBMF1 Jellybean 4.1.2). I would like to try his latest CleanRom8 (based on 4.3), but I don't want to lose my PP flash.
Do you (or anyone else) know what should be backed up or omitted to prevent losing my PP settings?
I'm currently on TWRP v2.6.3.1, would the PhilZ recovery in your link be better?
Regards - FG
Click to expand...
Click to collapse
I believe it had something to do with what the guy did to flash it. I kept breaking it with his flash. I flashed the phone on my own and I am running mastamoon's CM11 with working text, talk, and data. Flashing custom roms should NOT break a flash. Best I can say is give it a try. If it breaks I can remotely flash you talk and text again and you could look to Viper or Nevell for help getting data back, but once again it should NOT break your PP flash. Hope this helps.
EDIT: If you go to the rom in my signature there is a CWM swipe recovery in that thread. I am successfully running that right now. I personally like the layout of TWRP better, but seem to have more success with CWM and it seems like most if not all roms are supported by CWM recoveries.