I just discovered that such things even exist, and I'm intrigued by the idea. You just tap the tag with the phone and it can do stuff? What sort of stuff? How much stuff per tag? Do I need specific types of tags for the S4? I'm sort of geeked up by the idea of making my phone do stuff like it's magic.
I myself am just getting started with nfc tags. The 1 thing I've read about most is to automate a few tasks, for example when you get in your car and tap the nfc tag you can have the phone turn off wifi, turn on mobile data, turn on bluetooth etc.
I currently have 1 tag that I leave on the dash of my car and it is set to turn off wifi and turn on gps and bluetooth. I also have programmed the phone to say "welcome to the bat mobile"! (just to test it out). Also, on tapping on the same tag again when I'm home it does the opposite but says "welcome home".
The Galaxy S4 will work with NTAG203 nfc tags and not the older mifare 1k tags, as far as I know.
To get started you'll need:
1) NFC Capable phone
2) NFC tags. (I got some NTAG203 from eBay. 5 tags for $5 incl. shipping).
3) An app such as NFC Task launcher. I find this app to be the best and for some reason I am able to write more data to tags than for example the Samsung Tectile app.
Once you have the app installed and the tags. It's actually quite easy to get going.
There could be commercial uses for these tags if you own a business. You can program your company's website/address/phone and place them for marketing. People who have nfc capable phones can then tap on this tag to get the information.
Hope this helps!
Very interesting. It sounds like one could, for example, place a tag on a phone holder and have it launch Google Navigator. What would be even better is being able to execute a command after the app launches. That way, it would automatically ask you to speak the destination.
Sounds pretty cool.
ifcnece popularity
I have never used NFC tags either, coming from Apple devices. You mention that you have a tag in your car holder. Does this mean that the navigation app etc starts when you place the phone in the holder, and then quit those apps when you remove the phone from the holder? Or do you have to remove the phone and and then touch the NFC tag once again to deactivate the navigation app and such?
dj_aj said:
The Galaxy S4 will work with NTAG203 nfc tags and not the older mifare 1k tags, as far as I know.
Click to expand...
Click to collapse
From what I've read, you're right. I also found this thread discussing the differences and actually mentioning another type that works with the S4.
torroa said:
I have never used NFC tags either, coming from Apple devices. You mention that you have a tag in your car holder. Does this mean that the navigation app etc starts when you place the phone in the holder, and then quit those apps when you remove the phone from the holder? Or do you have to remove the phone and and then touch the NFC tag once again to deactivate the navigation app and such?
Click to expand...
Click to collapse
Yes the navigation app starts when you place the phone in the holder, however if you are talking about using the same NFC tag, the app will not quit when the phone is removed.
One NFC tag can only perform preset function(s) all at once, in sequential order. So if the NFC Tag is set to program the Navigation App to start, then programming the next action to close the same app will not do you any good.
To find out the types of functions a NFC Tag can be programmed with, download "NFC Task Launcher" from Google Play and click on "My Tasks".
But you can use apps to set the tag to be a toggle, right? So tap it once, it turns on navigation. Tap it again to turn it off? Or is that just for "togglable" settings like wifi on/off or bluetooth on/off?
flu13 said:
But you can use apps to set the tag to be a toggle, right? So tap it once, it turns on navigation. Tap it again to turn it off? Or is that just for "togglable" settings like wifi on/off or bluetooth on/off?
Click to expand...
Click to collapse
Yes. Applications can be set to launch on one tap and close on the other. These would need to be set as two different actions when you program the nfc tag.
Wifi/Bluetooth/GPS/Mobile Data etc can be set to toggle so you don't need to create separate entries and that will spare the very little data you can write to those nfc tags.
Get Tasker. It's worth it.
You can simply program NFC tags to run a specific Task in tasker.
An example of this usage would be as such....
Get Tasker
Set NFC tag to Run "Task XXX"
Place NFC tag/sticker in Car Dock
Dock Phone to Car
NFC toggles the start of "Task XXX"
In this case... "Task XXX" may do this
Set to loud speaker mode
When receiving calls, auto speakerphone (Couple this with the Wave to answer call gesture)
When receiving texts, read out messages
Auto launch Google Maps and plot a route home
instead of me trying to explain it, i think its better you watch a few video demos on my various play lists. http://www.youtube.com/user/veryannoyingname/videos?sort=dd&tag_id=&view=1 At present there are 53 public play lists sorted by device or feature and a few more private ones which i will make public at a later date probably.
see the NFC play list and Tasker play list and home automation play lists and a few more are there in my couple of how to play lists as well. I frequently update my play lists so check them out at a later date too. Subscribers will be alerted automatically when i upload videos or update play lists.
As I understand the nfc tag is used to store data that a.nfc.phone can read.
The stored data is to issue a command such as call contact, turn wifi on ect..
--*** Be Warned ***--
!!! Always turn nfc off when you go out as I'm sure people have realised this and you might walk past a person with a nfc tag in his pocket, then your phone may start doing unwanted acts such as uploading your account data. !!!
Sent from my GT-I9505 using xda app-developers app
JustSueMe said:
As I understand the nfc tag is used to store data that a.nfc.phone can read.
The stored data is to issue a command such as call contact, turn wifi on ect..
--*** Be Warned ***--
!!! Always turn nfc off when you go out as I'm sure people have realised this and you might walk past a person with a nfc tag in his pocket, then your phone may start doing unwanted acts such as uploading your account data. !!!
Sent from my GT-I9505 using xda app-developers app
Click to expand...
Click to collapse
NFC tags with over very short distances, see my video uploads on YouTube linked below.
unless the NFC tags were in the other chaps back pocket and your phone was in your trouser front pocket and you were close enough to be rubbing yourself on the other person's backside even then you would be lucky to be triggering off any such thing.
you actually demo such a hack working on another person's phone. I know there are a couple of such videos on YouTube. But seriously can anyone show a demo of such a hack working. If it did then all your credit cards that come with NFC on them now would be pillaged left right and centre by crooks and NFC tags would not come pre installed on credit and debit cards now by many major banks. Don't you think that would have tested out for such hacks on the nfc enabled credit and debit cards and NFC enabled Google phones with Google wallet features.
bubblesmoney said:
NFC tags with over very short distances, see my video uploads on YouTube linked below.
unless the NFC tags were in the other chaps back pocket and your phone was in your trouser front pocket and you were close enough to be rubbing yourself on the other person's backside even then you would be lucky to be triggering off any such thing.
you actually demo such a hack working on another person's phone. I know there are a couple of such videos on YouTube. But seriously can anyone show a demo of such a hack working. If it did then all your credit cards that come with NFC on them now would be pillaged left right and centre by crooks and NFC tags would not come pre installed on credit and debit cards now by many major banks. Don't you think that would have tested out for such hacks on the nfc enabled credit and debit cards and NFC enabled Google phones with Google wallet features.
Click to expand...
Click to collapse
I dont think debit cards with nfc would be effected by what i said as you would need a device not a tag.
Im sure that someone will solve range problem, there are many malicious people out there and even if not, there are many ways to get to your phone with out you realising. day to day activitys distract you, people are not as aware as they assume.
Offtopic but slightly relavent. I've had enough time to use a script I made on phone that involves plugging in a cable.so swiping a.tag over phone while your in a cafe isn't going to be hard.
So just be warned
Things aren't always as safe as you think.
Sent from my GT-I9505 using xda app-developers app
i have a tag in my car dash mount that toggles wifi and turns on my music app and then at work i have a tag on my pc to toggle wifi again and turn on silent mode. Pretty handy if you ask me rather than unlocking your phone and shuffling through it
lambstone said:
Get Tasker. It's worth it.
You can simply program NFC tags to run a specific Task in tasker.
An example of this usage would be as such....
Get Tasker
Set NFC tag to Run "Task XXX"
Place NFC tag/sticker in Car Dock
Dock Phone to Car
NFC toggles the start of "Task XXX"
In this case... "Task XXX" may do this
Set to loud speaker mode
When receiving calls, auto speakerphone (Couple this with the Wave to answer call gesture)
When receiving texts, read out messages
Auto launch Google Maps and plot a route home
Click to expand...
Click to collapse
Just ordered some NFC tags based on some of your ideas. It will be fun to screw around with at the least, and they're really cheap!
rtmeikle said:
Just ordered some NFC tags based on some of your ideas. It will be fun to screw around with at the least, and they're really cheap!
Click to expand...
Click to collapse
Check out the nfc play list on my channel where you will see many use case scenarios. Also check out the channel think it's called crowd gadgets on youtube who has many uploads for nfc and tasker combined use videos.
Remember, the S4 only works with a newer type of NFC tags. The old tags that advertised online to work with Galaxy S2, S3, Note 2, etc... WILL NOT work with the S4. I know because i have a bunch of them laying around the house being useless right now.
as far as I know, the new type of NFC tags that work with the S4 hasn't got release yet by Samsung. I dont know if other manufacturer made it tho.
xxlikquidxx said:
Remember, the S4 only works with a newer type of NFC tags. The old tags that advertised online to work with Galaxy S2, S3, Note 2, etc... WILL NOT work with the S4. I know because i have a bunch of them laying around the house being useless right now.
as far as I know, the new type of NFC tags that work with the S4 hasn't got release yet by Samsung. I dont know if other manufacturer made it tho.
Click to expand...
Click to collapse
these are the cheapest i found that are non samsung tags and they have the NTAG203 that works with the S4 i use the tags ordered from here daily with no issues.
http://tagsfordroid.com/
jax5ter said:
these are the cheapest i found that are non samsung tags and they have the NTAG203 that works with the S4 i use the tags ordered from here daily with no issues.
http://tagsfordroid.com/
Click to expand...
Click to collapse
So these tags from Amazon should work with the S4 right since its has NTAG203 chip?
http://www.amazon.com/TagsForDroid-...=merchant-items&ie=UTF8&qid=1370458262&sr=1-4
Related
Not being of mathematical mind im having trouble understanding the settings in a tasker profile i want to create.
What i need is a rule that would
a) switch on wifi when the screen is switched on
b) switch off wifi 2 minutes after screen turns off
Help would be appreciated!
android does that automatically. when the screen is of wifi goes to sleep after a certain timeout (you can change that timeout using OCLF)
Tasker meh!
I brought Tasker with nearly the same enthusiasm as I had when I got my Android phone. I couldn't wait to start making it my personal butler, alas this wasn't the case.
Yes I maybe I'm a retard and I'm sure I'm going to burn in forum flames of hell, and I'm sure the developer has worked very hard on this and he/she should be congratulated as I would never be able to do what they have done. That aside I'm a paying customer so I am entitled to my opinion. Unless we have all turned into Apple pricks
I'm really disappointed with how poor this is. I feel the UI is very unintuitive, cheap and kind of ugly, I have no idea how to use it and haven't the time or patience to sit in for a week to learn how to. Even the website is the same tatty thing that I saw back in the early part of the year.
I feel a great improvement would be that I could just scroll through all the different pre-made tasks and profiles (in the app not a broswer) created by Joe public and approved by the developer and with a tap of a finger and bit of personalizing, bob is your uncle! away we go!
Just my penny as being a very satisfied customer.
I find it very useful, and not very difficult to understand.
It is simply a tool that will trigger an (set of) action(s) on a set (combination of) event(s), nothing more, nothing less, make it as complex as you want.
@ftgg99, if ou take a look at the tasker website, especially the Wiki, there are enough examples.
I am using tasker now for awhile, and have been able to setup a lot of useful profiles, like
- Auto switch on/off Wifi when i am near my home (based on Cell tower location)
- Auto switch off Wifi after 10 min of a lost connection
- Auto switch off Wifi 10 min after being switched on and no connection was made
- Start skype when wifi is connected, logout skype on wifi disconnect
- Have a incoming SMS read aloud when phone is connected to carkit
- Auto mute between 23:00 and 06:00 except for favourite contacts
- Auto mute when in a meeting
- Disable Auto rotate for certain apps (Ebook reading in bed is annoying otherwise)
- Auto Enable GPS for specific apps and disable afterwards
- Auto switch on Bluetooth when WiFi connection lost (probably going to my car)
- Auto switch off Bluetooth after 10 min of a lost connection
- Auto switch off Bluetooth 10 min after being switched on and no connection was made
stinkypete said:
I brought Tasker with nearly the same enthusiasm as I had when I got my Android phone. I couldn't wait to start making it my personal butler, alas this wasn't the case.
Yes I maybe I'm a retard and I'm sure I'm going to burn in forum flames of hell, and I'm sure the developer has worked very hard on this and he/she should be congratulated as I would never be able to do what they have done. That aside I'm a paying customer so I am entitled to my opinion. Unless we have all turned into Apple pricks
I'm really disappointed with how poor this is. I feel the UI is very unintuitive, cheap and kind of ugly, I have no idea how to use it and haven't the time or patience to sit in for a week to learn how to. Even the website is the same tatty thing that I saw back in the early part of the year.
I feel a great improvement would be that I could just scroll through all the different pre-made tasks and profiles (in the app not a broswer) created by Joe public and approved by the developer and with a tap of a finger and bit of personalizing, bob is your uncle! away we go!
Click to expand...
Click to collapse
When I first bought Tasker, I felt the same way. The UI felt difficult to understand and I couldn't really get it to do what I wanted. Every few weeks, I would redownload it and give it another try, then quickly give up. At some point, it started to make sense and I figured out how it all works.
Yes, Tasker has a large learning curve and the UI needs work, but the time it took to figure it out has been so well worth it.
stinkypete said:
<snip>
I feel a great improvement would be that I could just scroll through all the different pre-made tasks and profiles (in the app not a broswer) created by Joe public and approved by the developer and with a tap of a finger and bit of personalizing, bob is your uncle! away we go!
Click to expand...
Click to collapse
Part of the attraction of Tasker for me is that it's not centred around loading and personalising profiles from a public 'bank'. Yes there are profiles that people have shared, both on the Tasker website and in numerous threads on various forums. I treated these as learning examples, 'tutorials', and used them to gain an understanding of how to start writing my own profiles.
I've had Tasker about 3 / 4 months and have written approximately 15 profiles that have significantly changed how I interact with my N1, and how it interacts with my environment. These range from the very simple (reduce media volume when a wired headset is plugged in), to the horrendously complicated (workaround an issue with my bluetooth connection to my car kit).
I doubt whether I would have bothered to experiment to this extent if the focus had been on loading up and personalising publicised profiles.
I agree that the UI is perhaps less polished than other apps, however at most I would suggest that the dev has concentrated first on function over form. As a software developer who cut his teeth on mainframe COBOL I approve of that, particularly given the number of pretty but buggy apps on the market. Personally I care more about Tasker working correctly - I don't want my phone to ring during meetings if it's set not to - than looking pretty, as (in between tweaking profiles) I don't really see the app itself.
Sorry it took a while to read these replies!
Anywho, i now have had a different idea - tasker should switch on wifi, check if a known network exists and if it does connect. If not it should switch wifi off.
ftgg99 said:
tasker should switch on wifi, check if a known network exists and if it does connect. If not it should switch wifi off.
Click to expand...
Click to collapse
Which is exactly what the WiFi Near Profile does,
with the time interval for each check being possible to set to your own liking.
However, you adding additional restrictions based on the cell-near could save some useless scanning. Usually Wifi Access points have a fairly static location don't they, so why do a WiFi Near scan if you are not at your home/work/collage anyway.
daoth said:
- Start skype when wifi is connected, logout skype on wifi disconnect
Click to expand...
Click to collapse
How did you achieve the logout on wifi disconnect? I can't get Tasker to kill apps, which is said to be a common problem under the latest FroYo stock ROMs (at least for my Desire HD)
I don't have root access btw, since that requires me to downgrade my ROM first, which would cause me to loose my warranty...
daoth said:
Just my penny as being a very satisfied customer.
I find it very useful, and not very difficult to understand.
It is simply a tool that will trigger an (set of) action(s) on a set (combination of) event(s), nothing more, nothing less, make it as complex as you want.
@ftgg99, if ou take a look at the tasker website, especially the Wiki, there are enough examples.
I am using tasker now for awhile, and have been able to setup a lot of useful profiles, like
- Auto switch on/off Wifi when i am near my home (based on Cell tower location)
- Auto switch off Wifi after 10 min of a lost connection
- Auto switch off Wifi 10 min after being switched on and no connection was made
- Start skype when wifi is connected, logout skype on wifi disconnect
- Have a incoming SMS read aloud when phone is connected to carkit
- Auto mute between 23:00 and 06:00 except for favourite contacts
- Auto mute when in a meeting
- Disable Auto rotate for certain apps (Ebook reading in bed is annoying otherwise)
- Auto Enable GPS for specific apps and disable afterwards
- Auto switch on Bluetooth when WiFi connection lost (probably going to my car)
- Auto switch off Bluetooth after 10 min of a lost connection
- Auto switch off Bluetooth 10 min after being switched on and no connection was made
Click to expand...
Click to collapse
How did you get wifi to switch off when its not connected to any network, occasional i leave the house and i forget to switch wifi off. I tried location based wifi off but it wont be as fast or accurate as switching off wifi when theirs no connection after lets say 1-2 minutes. I considered getting another app to do this after i tried to get it to work with tasker, but i have enough apps running in the background.
Do any of you leave gps turned on always so that tasker works better with locations? for me with just network location it can take some time to update and to turn on a profile.
arielc said:
Do any of you leave gps turned on always so that tasker works better with locations? for me with just network location it can take some time to update and to turn on a profile.
Click to expand...
Click to collapse
That may be linked to timings of background context checks when the screen is off.
Personally I always leave GPS on, but only use Net location / Cell IDs for my Tasker location contexts.
If anyone wants any ideas on Tasker profiles or want to know how to do something just go to my blog at http://dbilliter.blogspot.com. I update it regularly and will continue to try and improve the Profiles.
dbilliter said:
If anyone wants any ideas on Tasker profiles or want to know how to do something just go to my blog at http://dbilliter.blogspot.com. I update it regularly and will continue to try and improve the Profiles.
Click to expand...
Click to collapse
Thanks for the work...
The tasker website have some codes
http://tasker.wikidot.com/step-throughs
People please post more codes... would love to see more
drgopoos said:
Thanks for the work...
The tasker website have some codes
http://tasker.wikidot.com/step-throughs
People please post more codes... would love to see more
Click to expand...
Click to collapse
I am posting one everyday this week and I think I have a couple more. I will post even more whenever I either come up with new ideas or someone gives me a new idea.
Ok, I have a very basic understanding of tasker. I actually was able to make my gps app turn on the gps when being executed. I only added gps off exit task after reading the wiki. However, I'm trying to find a way to do the following:
when selecting pandora icon (I say icon, as I may need a pointer to the actual app)
verify wifi connection status - if connected, then load pandora app; if not connected, kill pandora app (might be redundant but just in case)
I also need to create a general wifi connection status, such that if connection is lost, kill specific running apps (such as pandora; could add more later)
I tend to fall asleep using headphones and pandora. I'd REALLY hate to find out that my cable/wifi went down while asleep and I've just been listening to pandora using cell data for several hours.
Now, making a profile to turn on wifi is easy enough, but not sure how to do the above. I'd imagine it'd be something like:
If [pandora app] initiated
wifi_connected = 1 (or yes or whatever)
then load [pandora app]
any help would be appreciated
EDIT: Nevermind. Though knowing more about how variables are used in TASKER would be interesting (I'll play around with them some more), I found out that with wifi ON, cell data usage is cut off. I disconnected my cable connection and with wifi still on, I couldn't connect to anything. So worry was unfounded, it turns out.
dbilliter said:
If anyone wants any ideas on Tasker profiles or want to know how to do something just go to my blog at http://dbilliter.blogspot.com. I update it regularly and will continue to try and improve the Profiles.
Click to expand...
Click to collapse
thanks once again.. am testing out a few of them
drgopoos said:
thanks once again.. am testing out a few of them
Click to expand...
Click to collapse
No problem. It is a hobby for me. I love doing it so I thought I would create a blog with the focus on Tasker to help people along. I know there are a number of other sites but I have been trying to make mine as basic as possible so that anyone could figure it out.
Some actual description of what the tasker profiles do would be very helpful... also less tit shots so that I don't catch crap for looking at the site from work would be nice.
dbilliter said:
No problem. It is a hobby for me. I love doing it so I thought I would create a blog with the focus on Tasker to help people along. I know there are a number of other sites but I have been trying to make mine as basic as possible so that anyone could figure it out.
Click to expand...
Click to collapse
I was trying to make 2 profiles
Profile 1 - I have set up a profile so that when i plug in a headphone with no mic ( and no mic in options ) , it opens the music app
Profile 2 - i have also set up another profile , when i plug in a Headset with mic ( and mic in options) , it opens the dialer.
However when i plug in the headset it opens both the Dialer and music app . Is there a way to prevent the music app from opening.
drgopoos said:
I was trying to make 2 profiles
Profile 1 - I have set up a profile so that when i plug in a headphone with no mic ( and no mic in options ) , it opens the music app
Profile 2 - i have also set up another profile , when i plug in a Headset with mic ( and mic in options) , it opens the dialer.
However when i plug in the headset it opens both the Dialer and music app . Is there a way to prevent the music app from opening.
Click to expand...
Click to collapse
Sorry for the delay. I don't know of a way personally. I can only work with what I got and I don't have a headset with a mic so I have no way of testing. One option you could do though is have a menu pop up and ask you which you want.
So under settings I spot that I can enable NFC although when I try to install Google Wallet, it installs and upon opening I get told the app isn't approved for my country/carrier. I'm curious if there's any way to get Google Wallet to work (mind you, I have it installed but can't open. All solutions I've seen have been to get it installed). If Google Wallet doesn't work then what good is the NFC in the phone? What other uses can I find for it?
You can buy tags online, program them, and stick them all over the place. You can use an app like NFC Task Launcher to program them and assign tasks to different tags. For example, if you put one on your desk at top you can tap your phone to it and it will enable wifi, bluetooth, and turn your ringer on. If you put one in your car you can have it set the phone to silent, turn off wifi, etc etc
stnguyen09 said:
You can buy tags online, program them, and stick them all over the place. You can use an app like NFC Task Launcher to program them and assign tasks to different tags. For example, if you put one on your desk at top you can tap your phone to it and it will enable wifi, bluetooth, and turn your ringer on. If you put one in your car you can have it set the phone to silent, turn off wifi, etc etc
Click to expand...
Click to collapse
Interesting. Thanks for the info. Kinda boring I can't use the Google Wallet though! Oh well. Now to try figuring why AT&T won't let me install a visual voicemail app.
Also (although I haven't tested,) Android Beam should work. I don't know too much about it, but you should be able to tap your phone to someone else's NFC-enabled Android phone and send them files.
I have no idea if this actually works though.
only Sprint has access to Google Wallet right now. AT&T, TMo and VZW are launching ISIS which is a competing service with a lot more options than one bank and one carrier...
craig0r said:
Also (although I haven't tested,) Android Beam should work. I don't know too much about it, but you should be able to tap your phone to someone else's NFC-enabled Android phone and send them files.
I have no idea if this actually works though.
Click to expand...
Click to collapse
Yep, Android Beam works as well. Me and my friend with his Verizon Gnex did it and it worked beautifully.
I was wondering if there's any Mod for both android and iOS that sends an alert (such as: "make sure to turn the oven off") as soon as I leave the house. The trigger maybe when my phone is out of my wifi's range or when i walk pass some sort of detector.
I dont know if this is the correct place to ask such question. I have an idea you guys will have an answer because there's a lot of problem solver on this website
vinunleaded182 said:
I was wondering if there's any Mod for both android and iOS that sends an alert (such as: "make sure to turn the oven off") as soon as I leave the house. The trigger maybe when my phone is out of my wifi's range or when i walk pass some sort of detector.
I dont know if this is the correct place to ask such question. I have an idea you guys will have an answer because there's a lot of problem solver on this website
Click to expand...
Click to collapse
What phone do you have?
You could do that with an NFC enabled phone (when you place it on an NFC tag) and I am pretty sure there's an app that has location detection that will do that when it detects you leaving a certain location.
orangekid said:
What phone do you have?
You could do that with an NFC enabled phone (when you place it on an NFC tag) and I am pretty sure there's an app that has location detection that will do that when it detects you leaving a certain location.
Click to expand...
Click to collapse
My family uses all sort of devices: iPhone 4S, Galaxy Note, Galaxy S II etc
nm. i found spot alerter for android. theres a built in feature for iphone. i will have to wwit for my wife to come home to confirm
Share your usage...
except of the regular notifications, samsung pay and so... What else? what Apps?
Yes im a new user with this watch after more then 3 years with the Moto 360 - which were great (with Google and android wear...) .
This watch helps me in maintaining a healthy activities.
It reminds me to standup after a long sitting, it tracks for my daily steps, my daily stair climbing, etc.
Is it accurate?.... Yesterday I climbed 3 floor on a row... And nada no evidence for it
To me, this watch is a gimmick. I just wear it like a watch and look at it to tell time.
boiteta said:
Is it accurate?.... Yesterday I climbed 3 floor on a row... And nada no evidence for it
Click to expand...
Click to collapse
Yes accurate. I climb 8-10 floors x 3-4 times per day and it shows exactly each time.
Controlling media playback...love that I don't have to take my phone out of my pocket to pause or to skip forward or backward when listening to podcasts.
Sent from my SM-G935V using Tapatalk
Nice
I already have this option with my ear phones... But not limited too
What else?
boiteta said:
Nice
I already have this option with my ear phones... But not limited too
What else?
Click to expand...
Click to collapse
Is one of the tiny Bluetooth earbuds. I can pause and play with it but can't skip forward and back.
Other favorites are quick reply to texts, controlling home automation with a Smartthings app, grocery list with Our Groceries app, and taking the occasional call on the watch like **** Tracy.
Sent from my SM-G935V using Tapatalk
I've never been one to keep much cash in my wallet, I pay for everything (even a 79 cent Slurpee) with a debit card. So my number one favorite use of the watch is S Pay. It works almost everywhere, I so rarely need my wallet, I usually just leave it in the car.
My other primary use of the watch is phone calls and messages. While the battery won't support 90 minute conference calls, it's perfect for the typically short, 7 - 12 calls and couple dozen messages I usually have in a day. The watch is remotely connected to my phone, which stays at home. When I'm out and about, I keep a tablet nearby for running apps and tasks that aren't suitable for 1" screen.
Not having to carry a phone or a wallet has been a major convenience for me. This level of detachment probably won't fit most people's lifestyle, but on your next vacation, you may want to try it!
afblangley said:
I've never been one to keep much cash in my wallet, I pay for everything (even a 79 cent Slurpee) with a debit card. So my number one favorite use of the watch is S Pay. It works almost everywhere, I so rarely need my wallet, I usually just leave it in the car.
My other primary use of the watch is phone calls and messages. While the battery won't support 90 minute conference calls, it's perfect for the typically short, 7 - 12 calls and couple dozen messages I usually have in a day. The watch is remotely connected to my phone, which stays at home. When I'm out and about, I keep a tablet nearby for running apps and tasks that aren't suitable for 1" screen.
Not having to carry a phone or a wallet has been a major convenience for me. This level of detachment probably won't fit most people's lifestyle, but on your next vacation, you may want to try it!
Click to expand...
Click to collapse
Not sure I understand... How do u make calls while connected remotely?
boiteta said:
Not sure I understand... How do u make calls while connected remotely?
Click to expand...
Click to collapse
The LTE versions of the watch have a cellular radio. Call functionality exists regardless of whether it's connected via BT, remote connection, or standalone. But differences come into play with regard to caller ID and messages. The BT only watches can't make phone calls when remotely connected via wifi because there is no VoIP app for the watch.
I go on a regular 5k run which is tracked and run locally as a '5K'...so I know it should be 5k! When using my HW2 watch with Strava I invariably get 4.8k for this same route. I've tried 3 or 4 times now with the same result.
When I use my phone on the same route it tracks 5k on Strava. I would like to not bring my phone with me when running but if I have to then so be it. Question is, I have heard that if the watch detects the phone it will use the phone's GPS. So, what I was thinking was to try this:
1) Run with phone and watch
2) Use Strava on the watch and hope it detects / uses the phones GPS.
3) Record result and see what happens.
Is this likely to result in another 4.8k run or does the watch deferring to the phone's GPS mean I'm more likely to get an accurate reading?
To clarify, the place I run is a park and therefore there are some trees but my Polar watch never had an issue with this and Strava on the HW2 says it has a GPS lock before I set off, so I don't think trees are the problem here.
i've only found the huawei app to work perfectly on the watch itself, while others hit and miss and that includes the built-in runtastic app - some apps you have to start on phone if you want that to record tracking if using the watch, which then makes it pointless wearing the watch.... I had issues with both mapmyfitness and runtastic where it would use the phone gps, but if turn phone off or it runs out of battery it never used the watch gps, so use one or the other...
I've also use only Huawei health built in app, since it records everything in one place - walk, sleep, calories, activity type, etc. I've use runasttic a few times and its seems to work correctly with built in gps.
For runtwstic it was hit and miss with using GPS on Watch, I had to turn off watch for it to trigger. I also found that if you had pro version the built in version wouldn't talk to it and insisted you install basic on phone.
Sent from my Huawei P20 Pro using XDA Labs
Interesting. I have just got a HW2C and tried it out running couple of days ago. Did 16.5k run, which strava and run keeper on my phone registered but the health app on watch have me a reading of 15.7km,despite tracking the route of the run perfectly.
Unfortunately this would be a deal breaker for me. Anyone else experienced this? Gonna try the strava app on the watch next time and see if that makes a difference. Any tips on getting the right distance?