Database Info

[J] [ROOT] Xperia J Root [Another Way]

Thanks to Dana Dwi Yanuarta @Facebook n Xperia.J @ Kaskus​
ROOT XPERIA J
TELL ME IF IT WORKS ON YOUR DEVICES
Download this and this, password : danadwi.
Extract SuperOneClickv2.3.3.rar dan Root_with_Restore_by_Bin4ry_v15.rar
Connect Xperia J on USB Debugging dan Unknown Device on (Settings --> Security).If you asked for PC Companion, abort it.
Open SuperOneClickv2.3.3 folder and run SuperOneClick.exe, than click "Donate Later".
Open Advance - Check Drivers. If you prompted to install, just click install.
After it's finished, open General - Root
Wait until the process is stopped, with #7 text log.
Open Root_with_Restore_by_Bin4ry_v15 folder and run RunMe.bat
Choose Normal Mode
Follow next instruction on RunMe.bat
Check if there's SuperSU or Superuser on your App Drawer
Thanks for Dana Dwi.

Thanks for your effort bro.
I think you might want to edit your 1st post and change "dan" to "and" and itu is our language and others might not understand it or get confused.
Sent from my ST26i

Thanks for sharing...
I doubt if I'm going to root my brand new XJ or not.
Just want to spare a little bit more time with the stock one
I'll try this later.

MatthewWu said:
Thanks to Dana Dwi Yanuarta @Facebook n Xperia.J @ Kaskus​
ROOT XPERIA J
TELL ME IF IT WORKS ON YOUR DEVICES
Download this and this, password : danadwi.
Extract SuperOneClickv2.3.3.rar dan Root_with_Restore_by_Bin4ry_v15.rar
Connect Xperia J on USB Debugging dan Unknown Device on (Settings --> Security).If you asked for PC Companion, abort it.
Open SuperOneClickv2.3.3 folder and run SuperOneClick.exe, than click "Donate Later".
Open Advance - Check Drivers. If you prompted to install, just click install.
After it's finished, open General - Root
Wait until the process is stopped, with #7 text log.
Open Root_with_Restore_by_Bin4ry_v15 folder and run RunMe.bat
Choose Normal Mode
Follow next instruction on RunMe.bat
Check if there's SuperSU or Superuser on your App Drawer
Thanks for Dana Dwi.
Click to expand...
Click to collapse
On the protected files download limit has been established! Can you again or somewhere else insert the second file?

I Cant download the 2nd file either.. shame i wanted to root my device.

I've updated my xperia j to firmware 11.0.A.7.5 and now i can't root it with this method...
Any help?

Eduardo C. said:
I've updated my xperia j to firmware 11.0.A.7.5 and now i can't root it with this method...
Any help?
Click to expand...
Click to collapse
Downgrade via flashtool.Find an older FW somewhere around here.

Steam. said:
Downgrade via flashtool.Find an older FW somewhere around here.
Click to expand...
Click to collapse
I've already did it... waiting for ftf file of the latest firmware because i think we could flash it with flashtool without loosing root if we only wipe cache unticking the option to wipe data.

Eduardo C. said:
I've already did it... waiting for ftf file of the latest firmware because i think we could flash it with flashtool without loosing root if we only wipe cache unticking the option to wipe data.
Click to expand...
Click to collapse
unticking wipe data did not work for me i lost root & cwm ):

Eduardo C. said:
I've already did it... waiting for ftf file of the latest firmware because i think we could flash it with flashtool without loosing root if we only wipe cache unticking the option to wipe data.
Click to expand...
Click to collapse
What do you gain by having new fw?Is there any perf bonus?I was still on my .16 release on the tipo and the new fw only featured a silly sms counter and blocked root access.I'm pretty sure the same goes for you.

Steam. said:
What do you gain by having new fw?Is there any perf bonus?I was still on my .16 release on the tipo and the new fw only featured a silly sms counter and blocked root access.I'm pretty sure the same goes for you.
Click to expand...
Click to collapse
My phone is faster in games and opening/changing between open applications with last firmware.
It can be rooted easily...

Steam. said:
Downgrade via flashtool.Find an older FW somewhere around here.
Click to expand...
Click to collapse
You can root with unlockroot pro
Please refer fb sony xperia j malaysia
Sent from my ST26i using XDA Premium HD app

EDIT: I rooted with the mirror of UnlockRootPro (in the UnlockRoot thread OP use the dropbox mirror). Works perfectly. Just needed to reboot after and its rooted!

why when i try root , i got error "read only file system"
how to rewrite it ??
adb cannot push SU into my Xperia J .
blocked by system

Lol malaysian..im from there too.
Sent from my ST26i using xda app-developers app

I also Malaysian.
Hey!Found another way to root Xperia J with JB!
Sent from my ST26i using xda app-developers app

Hello from Greece how can I root my phone ? Latest jb with locked bootloader
Sent from my ST26i

Eduardo C. said:
I've updated my xperia j to firmware 11.0.A.7.5 and now i can't root it with this method...
Any help?
Click to expand...
Click to collapse
Use unlockroot
sent from my Xperia J and Galaxy W with customized ICS

[TuT] Xperia J Are You A Noob Or Just New To The Xperia Forums Then Look Here.

Basic Tools, Knowlage & Files You Will Need​
Ok lets begin i have been asked quite a few times so here it is. These are the basic tools files etc. you will need. I will write an brife explanation of what these tools, files are for and what they can do and installation instructions.
7Z.​used to extract zip file contents used mainly to compress data files to save space and time uploading & downloading find it here: http://www.7-zip.org/download.html
Winrar​
Used also to extract zips but also rar & tar files download from this link: http://www.win-rar.com/download.html?&L=0
Flashtool​
Flashtool was created by Bin4ry & Androxide legends around here it is used to do various things the main reason you will probably use it for is recovering from a brick The Main uses are flashing flashing stock firmware that come in ftf file format (which stands for "flash tool file") kernels can come in this format to and are flashed using "flashmode" enterd by holding down the volume down key while connecting the usb cable when you see a green led that indicates "flashmode". Flashing custom kernels these normally come in .img format (which is an image file) and require an unlocked bootloader. Sony lock there bootloaders to protect their DRM key which are security key for media apps like track-id & facebook inside xperia. Custom kernels are needed for custom roms like Cyanogenmod, AOSP, & AOKP A custom recovery can come in this format to to flash .img files we use "fastboot" for this (which is enterd by turning off phone and holding volume up key while connecting usb cable a blue led will indicate your in fastbootmode then click on the lightning bolt on flastool and select fastboot mode to open the fastboot toolbox) These ate the basic operations you need tho know...
download flashtool from the flash tool home at: http://androxyde.github.io/index.html?1350585408000
Installation​
download flashtool from link if its in a zip format extract with 7z. You will get a flashtool launcher double click and follow the on screen instructions then reboot you pc/laptop.
Driver Installation​ next we need to install the flash tool drivers Tipo/Dule/Miro/J/E dont have the drivers in the package so you will have to download them separate do a search get use to that you will be doing a lot of it when you have found and downloaded the flashtool drivers extract the zip with 7z. you will get an FTD file (flashtool driver file) copy and past it in the flashtool sub folder devices (to get to flashtool folder right click on start menu then click on expolore you will see all the files on your computer find and click on flashtool you will see more sub folders we want the devices folder) after you have pasted it there exit to desktop start flashtool and click the devices tab then import a window will pop up with you device click ok then it will import you devce drivers when its finished your done flashtool is all set up congratulations!
FTF Files​
Ok ftf files are the bundled parts of the Sony stock firmware created buy someone through flashtool & SUS (sony update service) mainly used to recover from a soft brick or if you have unlocked your bootloader then it will be the only means you can update stock firmware as sony will not let you officialy update your phone as they will class it as modified. when downloaded it would probably be in a zip file (se 7z. is coming in handy ) Then start flashtool and drag the extracted ftf file into the flashtool window (the big white box) click ok and files will begin to prepare. when they are raedy a window will popup with a phone and a usb cable on it this is telling you to connect a phone in flashmode do by holding the volume down key while connecting the usb to your phone (keep hold of volume down until flashin process starts) when its all finished reboot there you have it you flashed a firmware. You can flash between platforms like Gingerbread to ICS or Jelly bean to ics.
Find all the ftf firmware files here http://forum.xda-developers.com/showthread.php?t=2385526 and make sure you thank the member for making the thread by pressing the Thanks button
Rooting Your Phone​
Rooting your phone is hacking in to the software to gain access to the root system files hence the term "ROOTING". This allows you to modify your phone install apps that require root permitions, run performance tweaks and flash custom firmware.
Root ICS​
There are several methods but unlockroot roots all ICS Roms Link: http://www.unlockroot.com/download.html
Root Jelly Bean​
To root Jelly Bean 11.2.A.0.21, .31,.33 Firmware's http://forum.xda-developers.com/showthread.php?t=23 and thank the great and powerful DoomLord
Clockworkmod Recovery​
Clockworkmod recovery All so known as (CWM) was developed by Koushik Dutta (Koush), a well-known name in the Android development community. It is a custom recovery that backs up and restores android roms exactly how you left it at the time of the backup. It also is used to flash CWM flashable zips like mods apps or even an entire firmware. CWM has not been ported to our device running jelly bean only ICS there are 2 but the best one is here: http://forum.xda-developers.com/showthread.php?t=2003069
For CWM on jellbean look a this thread http://forum.xda-developers.com/showthread.php?t=2333078
I think thats it to get you started fellow xperia users hopefully i will change or add things when needed or when new things are released happy modifying and
Welcome To The XDA Community
ALWAYS FOLLOW THE XDA RULES!! ​Maybe push for this to be a sticky so ita easy to find

gavster26 said:
Driver Installation
next we need to install the flash tool drivers Tipo/Dule/Miro/J/E dont have the drivers in the package so you will have to download them separate do a search get use to that you will be doing a lot of it when you have found and downloaded the flashtool drivers extract the zip with 7z. you will get an FTD file (flashtool driver file) copy and past it in the flashtool sub folder devices (to get to flashtool folder right click on start menu then click on expolore you will see all the files on your computer find and click on flashtool you will see more sub folders we want the devices folder) after you have pasted it there exit to desktop start flashtool and click the devices tab then import a window will pop up with you device click ok then it will import you devce drivers when its finished your done flashtool is all set up congratulations!
Click to expand...
Click to collapse
Hi bro, Thanks for the guide.
I cant seems to fine the "Devices Tab". My flashtool interface only have "File" and "Plugins" and when I click File, I can only see Exit option and when I click at Plugins, nothing came out. Please advice.

nakTT said:
Hi bro, Thanks for the guide.
I cant seems to fine the "Devices Tab". My flashtool interface only have "File" and "Plugins" and when I click File, I can only see Exit option and when I click at Plugins, nothing came out. Please advice.
Click to expand...
Click to collapse
Along the top there should be file,tools,Language,plugins,devices,help no exceptions bro try uninstalling flashtool then reinstalling

gavster26 said:
Along the top there should be file,tools,Language,plugins,devices,help no exceptions bro try uninstalling flashtool then reinstalling
Click to expand...
Click to collapse
Mine only have File and Plugins.
It is the latest version.

nakTT said:
Mine only have File and Plugins.
It is the latest version.
Click to expand...
Click to collapse
Try the previous version.. V0.9.0.0 http://androxyde.github.io/index.html?1350585408000
..or the latest beta.. v0.9.10.2 beta6 http://forum.xda-developers.com/showthread.php?t=2201189

2cans1string said:
Try the previous version.. V0.9.0.0 http://androxyde.github.io/index.html?1350585408000
..or the latest beta.. v0.9.10.2 beta6 http://forum.xda-developers.com/showthread.php?t=2201189
Click to expand...
Click to collapse
Thanks bro.

2cans1string said:
Try the previous version.. V0.9.0.0 http://androxyde.github.io/index.html?1350585408000
..or the latest beta.. v0.9.10.2 beta6 http://forum.xda-developers.com/showthread.php?t=2201189
Click to expand...
Click to collapse
I am now using V0.9.0.0, I can see all of the menu except the devices.
Please advice.

nakTT said:
I am now using V0.9.0.0, I can see all of the menu except the devices.
Please advice.
Click to expand...
Click to collapse
Check your USB drivers for the phone? Make sure phone is connected directly to PC and not through a hub.

2cans1string said:
Check your USB drivers for the phone? Make sure phone is connected directly to PC and not through a hub.
Click to expand...
Click to collapse
It is perfectly fine. I updated the phone to the latest official (using sony pc companion) on this laptop.
I just can't see the Menu of "Devices", it doesnt appear at all, other Menu seems fine.
---------- Post added at 08:38 AM ---------- Previous post was at 08:10 AM ----------
2cans1string said:
..or the latest beta.. v0.9.10.2 beta6 http://forum.xda-developers.com/showthread.php?t=2201189
Click to expand...
Click to collapse
This beta version managed to detect my Xperia J without me having to install any driver. Thanks.

nice tutorial !
full tutorial <3
i love Xperia J !

Still unable to flash my JB Xperia J to ICS.
Sent from my ST26i

nakTT said:
Still unable to flash my JB Xperia J to ICS.
Sent from my ST26i
Click to expand...
Click to collapse
I don't know what to tell you there should be all the toolbars there

Ftf file flash after have some problem or hard brick?
Send from Malaysia by Xperia J

pls,fix the below link as it is not working
http://forum.xda-developers.com/show....php?t=2003069

harsh73 said:
pls,fix the below link as it is not working
http://forum.xda-developers.com/show....php?t=2003069
Click to expand...
Click to collapse
All fix bro

[Q] Any changes if you're rooting on a mac?
Hiya,
great tutorial -- im a total newcomer and have been reading (what seems like) hundreds of pages on this site for the last few days, trying to learn how to root my phone. i think i have it the process mostly down, but the one thing i'm not quite sure about is doing everything on a mac.
my phone (arriving in a few days) -- xperia E (C1504 version) i have a 32g sd card from my current phone that i will probably re-use (unless this isn't advisable?) as i understand it, i'll have to unlock the bootloader first, then root the phone. my plan is to just remove the sony bloatware, install a fairly vanilla rom, and make the cpu/battery run more efficiently. was thinking about the vengeance kernel, too.
ive read through a few mac-specific threads, but was wondering if you (or anyone else) might be able to point me in the right direction when it comes to doing all of the above on a mac.
many thanks,
mei
-----
sony xperia E (C1504)
macbook pro
new york yankees

Nice thread, thnk you

TR26 said:
Hiya,
great tutorial -- im a total newcomer and have been reading (what seems like) hundreds of pages on this site for the last few days, trying to learn how to root my phone. i think i have it the process mostly down, but the one thing i'm not quite sure about is doing everything on a mac.
my phone (arriving in a few days) -- xperia E (C1504 version) i have a 32g sd card from my current phone that i will probably re-use (unless this isn't advisable?) as i understand it, i'll have to unlock the bootloader first, then root the phone. my plan is to just remove the sony bloatware, install a fairly vanilla rom, and make the cpu/battery run more efficiently. was thinking about the vengeance kernel, too.
ive read through a few mac-specific threads, but was wondering if you (or anyone else) might be able to point me in the right direction when it comes to doing all of the above on a mac.
many thanks,
mei
-----
sony xperia E (C1504)
macbook pro
new york yankees
Click to expand...
Click to collapse
I have never had a mac bro I hate them. So I wouldn't know sorry.

gavster26 said:
I have never had a mac bro I hate them. So I wouldn't know sorry.
Click to expand...
Click to collapse
This should be Sticky, thanks for your contribution man.

Dzepar said:
This should be Sticky, thanks for your contribution man.
Click to expand...
Click to collapse
Yes I don't really Know how to push this for a stickey or the moderaters don't think it should be. its really usefull but is always buried 6 or 7 pages back where no one can find it

[ROMs and Recoveries] Karbonn Titanium S5 Plus/ S5 + - All Things And Dev.

Updates at this thread have been stopped. Please check out Devs-Lab.com for all stuff that is/was/would be here. Links below are provided for reference, and will not be updated from now.
The Official Karbonn Titanium S5 Plus Thread :
Note : This is for the Karbonn Titanium S5 Plus / Coolpad 7295C Device and Development related to it and its clones only.
Click to expand...
Click to collapse
Original Karbonn ROM :
https://tr.im/20c3b
Click to expand...
Click to collapse
Stock ROM in a flashable Zip format :
http://karbonnroms.blogspot.in/2014/...um-s5plus.html
Click to expand...
Click to collapse
Here are the Custom Recoveries for this device :
Preferred, Tested : Philz Touch Recovery 6.57.9 ( based on ClockWorkMod Recovery v6.0.5.1 )
https://tr.im/2eae8
TWRP Recovery 2.7.1.0 ( Touch )
https://tr.im/1757c
ClockWorkMod recovery for Karbonn Titanium S5 Plus : ( Non - Touch )
tr.im/RWOT
ClockWorkMod - based recovery for Karbonn Titanium S5 Plus ( Modded by carliv @ xda )
tr.im/f2c21
Click to expand...
Click to collapse
Next, Here are the Custom ROMs
Click to expand...
Click to collapse
Sony Xperia Z:
https://www.dropbox.com/s/e8sq7s60de...nn_S5_Plus.zip
Note : The above mentioned link doesn't appear to work. If anybody finds this file link working, please add a post here and if possible, upload the file to Google Drive and Post the link here.
Click to expand...
Click to collapse
Sony Xperia Z v2:
https://tr.im/ca47d
Credits : Ajinkya Mishra
Mayank Girdhar
Click to expand...
Click to collapse
Miui v5 :
http://www.needrom.com/wp-content/up...37e511_4.2.zip
( to download this, you need to log in to needrom.com first )
Click to expand...
Click to collapse
Lewa OS:
https://tr.im/LewaOSforS5Plus
Click to expand...
Click to collapse
MIUI v6:
https://tr.im/MIUIv6forS5Plus
Click to expand...
Click to collapse
Samsung Galaxy Note 3-themed ROM :
http://karbonnroms.blogspot.in/2014/...um-s5plus.html
Click to expand...
Click to collapse
Stock Flashable ROM :
http://karbonnroms.blogspot.in/2014/...um-s5plus.html
Click to expand...
Click to collapse
Android Lollipop-themed ROM :
http://karbonnroms.blogspot.in/2014/...um-s5plus.html
Click to expand...
Click to collapse
Fly UI ROM :
https://www.dropbox.com/s/8q6ap1lnht...tfors5plus.zip
Click to expand...
Click to collapse
Samsung Galaxy S5-themed ROM :
http://www.4shared.com/zip/vP4RARWOba/XtremeS5.html?
Click to expand...
Click to collapse
Also visit these pages for more help...
https://www.facebook.com/karbonns5plus
https://www.facebook.com/karbonnroms
http://karbonnroms.blogspot.in
Click to expand...
Click to collapse
Note : The above posted links for ROMs are not tried and tested ! Be Careful !
For some of the ROM downloads, you need to log into the respective sites...
Thanks mainly to the thunderboys team and all other developers of the respective ROMs whom I haven't mentioned.
Click to expand...
Click to collapse
SystemUI.apk and SystemUI.odex files:
http://www.4shared.com/rar/cyMk4Dyub...lus_Syste.html
Click to expand...
Click to collapse
Steps for flashing a .img file to a specific partition ( here, recovery ) :
Here are the two methods :
1st Method ( Using ADB ) -- This needs the phone to be connected to the computer.
Go to the folder containing the recovery.img file you just downloaded.
Shift + Right Click on any empty space in the folder and Select Open Command Window Here
Connect the phone to the computer and make sure you have USB Debugging enabled and not USB Storage
Type these into the Command Window :
adb devices -- This should show the Device attached as KarbonnTitaniumS5Plus-xxxx or any such line.
adb get-state -- This is to ensure USB Debugging works. It will show device, recovery or offline, but here, we would be looking for device
adb reboot bootloader -- This reboots the device into Fastboot mode, also called as HBOOT or Bootloader. This mode is necessary for flashing the recovery.img file
fastboot oem unlock -- This is to ensure that you can flash xxxx.img files to specific partitions of the device.
fastboot flash <<partitionname>> <<nameofrecoveryimagefile.img>> -- This flashes the specific partition image file to the specified partition. Here, we would be looking for something like fastboot flash recovery philzrecoverys5plus.img for the PhilZ Touch Recovery and fastboot flash recovery twrprecovery.img for the TWRP Recovery and fastboot flash recovery cwmrecoverys5plus.img for the.... Well, you understand what I mean. This should show some text on the device like Transferring Flash or Writing Flash and the Time and Speed of it, that would confirm your flashing.
fastboot reboot -- This command reboots the device into the normal system, and lo, you're ready to go !
Click to expand...
Click to collapse
From here, you can reboot to recovery and back again without any issues. This is the tried and tested method, the method which worked perfectly when I tried it on my device. Else, if you have no patience for connecting the Phone to the PC, jabbing on the keyboard and entering n number of commands, you could try this out :
2nd Method ( Using Terminal Emulator ) -- This doesn't need the phone to be connected to the computer.
Place the recovery.img file in the Internal Storage or External SD Card -- Here, I'm placing it as in storage/sdcard0/xxxxrecovery.img
Install Terminal Emulator or any such app onto the phone and Open it.
Type these commands one by one :
su -- This gives root permissions to the Command Executor.
flash_image recovery /storage/sdcard0/xxxxrecovery.img -- This flashes the recovery image file to the recovery partition.
Close the Terminal Window.
Done !
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Another Note : If you're following the Second ( Terminal Emulator ) Method, note that there is a space between flash_image and recovery and the path of the image file. The first method is the preferred one, which worked perfectly with no errors for me; while the second method is risky and might return some errors while trying it out.
Click to expand...
Click to collapse
Another Loooooong Shortened Note : The TWRP Recovery might, in some rare cases, show your battery level as 19% when it is at 99% and the same goes for the others. If you are encountering this error damn frequently, I'd recommend reverting back to the original CWM basic recovery as it doesn't show any battery info at all ! You also have the option of wiping your Battery Statistics in case the Battery Error in the Touch Recoveries made the system too show the same error. Once, after fully charging the phone to 100% and rebooting to recovery, I found that the TWRP recovery showed the battery level at 19% ! Out of curiosity, I rebooted back to the system and it too, showed it at 19% ! I just plugged it into the charger and was like Whoa !, as the battery sprang from 19% to 24% in 7 seconds flat ! I know that neither the reboot to recovery does drain out that much battery, nor does the recovery randomly perform such miracles on it. So, I just flashed CWM basic recovery to it using fastboot mode, opened it, did a Battery Stats wipe and rebooted to the System. It was back to 99% ! So, a full Battery Statistics wipe helped me solve such errors, and might do the same to you too. Just remove the battery from the phone after you power off from the recovery, put it back in, and let the phone start up. Problem Solved ! Damn, why didn't I think of this earlier ?
Click to expand...
Click to collapse
Yet Another Short-But-Not-So-Short Note : I'd recommend disabling the Boot Animation on the phone ( using ROM Toolbox Lite or Pro ) so that the possibility of bootloops is diminished. No Boot Animation = Less Chance of Bootloops !
Click to expand...
Click to collapse
One Last Note : ( Yeah, Right. )
The MIUI ROM and the Sony Xperia v2 ROM work properly. For people who have boot issues, doing a full data wipe/factory reset through the recovery will solve that problem... MIUI is pre rooted, but chainfire's SuperSU app is not installed and there is no keyboard app. The Sony Xperia v2 ROM has SuperSU installed and works properly. However, a high amount of patience is needed to wait for the ROMs to boot up...
As mentioned by cybercrawler, the internal/external swap supposedly works, and appears to be already applied in these ROMs... so, if you are going to flash a new ROM, you had better undo this change...
The clockworkmod recovery file works too, as seen in the screenshots uploaded by cybercrawler... thanks to him for testing that out.
I shall be uploading some screenshots of these in a few days. Both the ROMs run Android Jelly Bean 4.2.2, and the MIUI ROM has a update scheduler app, so I'm guessing it can be updated to 4.4 Kitkat. Anyway... if anybody knows how to bypass Dropbox Error 509 ( This account's public links are generating too much traffic and are temporarily disabled ), please download the Xperia Z v1 ROM and upload it to Google Drive...
Check this thread for further development on this device.
If anybody is willing to volunteer to try a ROM still in development for this device, you can download it here :
https://tr.im/CarbonForKarbonnv1
It is NOT READY FOR FLASHING, but is a Kitkat ROM, so anybody willing to put in their efforts in the development of this ROM can help.
Click to expand...
Click to collapse

rjt.rockx said:
The Official Karbonn Titanium S5 Plus Thread :
Note : This is for the Karbonn Titanium S5 Plus / Coolpad 7295C Device and Development related to it and its clones only.
Original Karbonn ROM :
https://tr.im/20c3b
First off, Here are the Custom Recoveries for this device :
ClockWorkMod recovery for Karbonn Titanium S5 Plus :
tr.im/RWOT
ClockWorkMod - based recovery for Karbonn Titanium S5 Plus ( modded by carliv @ xda )
tr.im/f2c21
Next, Here are the Custom ROMs
Sony Xperia Z:
https://www.dropbox.com/s/e8sq7s60de...nn_S5_Plus.zip
Note : The above mentioned link doesn't appear to work. If anybody finds this file link working, please add a post here and if possible, upload the file to Google Drive and Post the link here.
Sony Xperia Z v2:
https://tr.im/ca47d
Credits : Ajinkya Mishra
Mayank Girdhar
Miui :
http://www.needrom.com/wp-content/up...37e511_4.2.zip
( to download this, you need to log in to needrom.com first )
Also visit these pages for more help...
https://www.facebook.com/karbonns5plus
https://www.facebook.com/karbonnroms
http://karbonnroms.blogspot.in
Note : The above posted links for ROMs are not tried and tested ! Be Careful !
For some of the ROM downloads, you need to log into the respective sites...
Thanks mainly to the thunderboys team and all other developers of the respective ROMs whom I haven't mentioned.
SystemUI.apk and SystemUI.odex files:
http://www.4shared.com/rar/cyMk4Dyub...lus_Syste.html
One Last Note : ( Yeah, Right. )
The MIUI ROM and the Sony Xperia v2 ROM work properly. For people who have boot issues, doing a full data wipe/factory reset through the recovery will solve that problem... MIUI is pre rooted, but chainfire's SuperSU app is not installed and there is no keyboard app. The Sony Xperia v2 ROM has SuperSU installed and works properly. However, a high amount of patience is needed to wait for the ROMs to boot up...
As mentioned by cybercrawler, the internal/external swap supposedly works, and appears to be already applied in these ROMs... so, if you are going to flash a new ROM, you had better undo this change...
The clockworkmod recovery file works too, as seen in the screenshots uploaded by cybercrawler... thanks to him for testing that out.
I shall be uploading some screenshots of these in a few days. Both the ROMs run Android Jelly Bean 4.2.2, and the MIUI ROM has a update scheduler app, so I'm guessing it can be updated to 4.4 Kitkat. Anyway... if anybody knows how to bypass Dropbox Error 509 ( This account's public links are generating too much traffic and are temporarily disabled ), please download the Xperia Z v1 ROM and upload it to Google Drive...
By the way, I'll be uploading links to some must-have apps for a custom ROM user within a few days. Check this thread for further development on this device.
Click to expand...
Click to collapse
Hey there,my question might seem foolish but just wanted to know if our device supports USB otg?
Sent from my Karbonn Titanium S5 Plus using XDA Premium 4 mobile app

cybercrawler said:
Hey there,my question might seem foolish but just wanted to know if our device supports USB otg?
Sent from my Karbonn Titanium S5 Plus using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Yes and No.
No, as it isn't included in the device's features and comes with no otg cable.
Yes, if you buy a third party USB OTG cable and install chainfire's stickmount app.
Here's the link to the app :
https://play.google.com/store/apps/details?id=eu.chainfire.stickmount
and the xda thread :
http://forum.xda-developers.com/galaxy-nexus/themes-apps/23-03-2014-stickmount-v3-01-t1400034
Hope it helps !

Heck is their the possibility that i might get bootloop!!!Because the last time I tried one of Chainefire's app(chain fire 3D)I got stuck on 1.But anyways thanks
Sent from my Karbonn Titanium S5 Plus using XDA Premium 4 mobile app

cybercrawler said:
Heck is their the possibility that i might get bootloop!!!Because the last time I tried one of Chainefire's app(chain fire 3D)I got stuck on 1.But anyways thanks
Sent from my Karbonn Titanium S5 Plus using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Nah, there is no possibility of getting bootloop. The app doesn't need reboot at all !

Good news !
Finally, TWRP Recovery v 2.7.1.0 has been ported to our device by... me.
It works !
Features :
Touch recovery
Navigation buttons enabled
Displays Time, Date, Battery, etc.
File Manager built in
Option to Partition SD Card
Terminal Commands supported
ADB Sideload available
Ability to reboot into System, Recovery, Bootloader or Power Off
Can mount USB Storage
Toggles:
Zip file signature verification
Usage of rm -rf instead of formatting
Skip MD5 generation during backup
Enable MD5 verification of backup files
Screen Timeout Setting
Brightness Slider
Time zone Chooser
Keyboard built-in
Uploading the recovery.img file after some time. Check this thread for further updates !

Here's the link to the TWRP Recovery :
https://tr.im/1757c
Hope it helps !

rjt.rockx said:
Here's the link to the TWRP Recovery :
https://tr.im/1757c
Hope it helps !
Click to expand...
Click to collapse
Still working on the Carbon ROM... May take a few more days to create a working,booting ROM !!!
( Creating a new update binary file now, old one wasn't working. )
Anyway, after this and the flashable stock rom zip file, i'll be porting miui 6 to this device !
After that, maybe, I was thinking of an Android L ROM for this device...
Anyway, Back to Project CarbonForKarbonn for now...
Could anyone upload the specifications of moto g (codename falcon) in a post here ?
I need to know it's features and some information abt. it, like whether it supports dual sim, has external sd card support, etc.
so that I could rectify any problems which are occuring because of such non-compatibility errors.
Looooooong schedule... this might take forever...

rjt.rockx said:
Still working on the Carbon ROM... May take a few more days to create a working,booting ROM !!!
( Creating a new update binary file now, old one wasn't working. )
Anyway, after this and the flashable stock rom zip file, i'll be porting miui 6 to this device !
After that, maybe, I was thinking of an Android L ROM for this device...
Anyway, Back to Project CarbonForKarbonn for now...
Could anyone upload the specifications of moto g (codename falcon) in a post here ?
I need to know it's features and some information abt. it, like whether it supports dual sim, has external sd card support, etc.
so that I could rectify any problems which are occuring because of such non-compatibility errors.
Looooooong schedule... this might take forever...
Click to expand...
Click to collapse
As for TWRP how should I flash it?I already have CWM so what should I do in this case? I just want to try TWRP so pls tell me how should I remove CWM.
Sent from my Karbonn Titanium S5 Plus using XDA Premium 4 mobile app

cybercrawler said:
As for TWRP how should I flash it?I already have CWM so what should I do in this case? I just want to try TWRP so pls tell me how should I remove CWM.
Sent from my Karbonn Titanium S5 Plus using XDA Premium 4 mobile app
Click to expand...
Click to collapse
You need to have ADB and Fastboot tools and the recovery file in the same folder.
Connect the device to the computer, open USB Debugging in Android, open a command window in the folder with adb and twrprecovery.img image ( Shift + Right Click ), and type these commands in it :
adb root -- Don't worry if this shows any error like adbd cannot run as root in production builds. Just proceed with the next step.
adb devices
adb reboot bootloader
fastboot flash recovery twrprecovery.img -- This will automatically format that partition and install the recovery image to it.
fastboot reboot
adb reboot recovery
Done !

Anyway... Building the final parts of the Carbon Nightly ROM, also simultaneously working on MIUI 6 for this device.
Stock ROM build is happening... Just have to generate the updater-script and the update binary.
Status of Each Build :
Carbon ROM : Needs a new Update Binary, creating it, coding it.
TWRP Recovery : Done !
MIUI 6 : Downloading the latest release version. Porting and Update Binary and Updater Script pending.
Stock Flashable Zip : Creating all Update files from scratch, system folder is ready, deodexing pending, App updates pending.
Xperia v3 : Boot Animation Build Progressing, Updating all stock Google apps, Adding Xposed Framework, etc.
Android L ROM : Waiting for a Stable Android L ROM to be released here, still no progress.

Here are the basic mount points of this device which I accidentally discovered while messing about in the Stock ROM :
system : [email protected] : dev/block/mmcblk0p8 -- This is for the System folder, has ext4 partition type
data : [email protected] : dev/block/mmcblk0p10 -- This is for the Data folder, has ext4 partition type
cache : [email protected] : dev/block/mmcblk0p9 -- This is for the Cache folder, has ext4 partition type
Hope it helps !

Which do you think is better : External SD Card as Main Storage or Internal SD Card as Main Storage ?
Anybody can reply by posting here.
This question is for the Carbon ROM and the Stock Flashable Zip ROM.
I felt I should ask you this question as I felt that Internal SD Card has way too less storage for me, but my decision cannot be everybody's decision, can it ?. ( I have 180+ Apps on this device, all linked to SD Card ( 32 gb, ~1.5 gb free space remaining ) ).

rjt.rockx said:
Which do you think is better : External SD Card as Main Storage or Internal SD Card as Main Storage ?
Anybody can reply by posting here.
This question is for the Carbon ROM and the Stock Flashable Zip ROM.
I felt I should ask you this question as I felt that Internal SD Card has way too less storage for me, but my decision cannot be everybody's decision, can it ?. ( I have 180+ Apps on this device, all linked to SD Card ( 32 gb, ~1.5 gb free space remaining ) ).
Click to expand...
Click to collapse
Internal SD card is always a better options.Anyways keep it up with all the developments.
Sent from my Karbonn Titanium S5 Plus using XDA Premium 4 mobile app

But then, what about the apps ? Wont you need that much storage for apps ?

rjt.rockx said:
But then, what about the apps ? Wont you need that much storage for apps ?
Click to expand...
Click to collapse
But any was 2 GB storage is much low.Heck I have installed so much things on my device I have been having 'storage space running out' since two weeks!Anyways try to keep the internal storage as our SD Card.
Oh and nobody seems to be active on this thread except you and me.
Sent from my Karbonn Titanium S5 Plus using XDA Premium 4 mobile app

cybercrawler said:
But any was 2 GB storage is much low.Heck I have installed so much things on my device I have been having 'storage space running out' since two weeks!Anyways try to keep the internal storage as our SD Card.
Oh and nobody seems to be active on this thread except you and me.
Sent from my Karbonn Titanium S5 Plus using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Yeah... But once I upload the ROMs which I am building, some more will definitely visit.

Hi rjt.rockx.....Thank you very much for ur hard work to make our device pretty awesome....
Plz make the ext. Sd card as main storage bcoz 2gb space s not enough for application itself.......
Wishing u all the best in ur current n future projects....:beer::beer::beer:
Sent from my GT-N8000 using XDA Premium 4 mobile app
---------- Post added at 01:21 AM ---------- Previous post was at 01:17 AM ----------
Currently am using xperia v2 rom....everything works pretty good n smooth.........Eagerly waiting for ur future updates.......And one more thing , camera quality s not that good in low light. So any changes will be pretty nice too....
Sent from my GT-N8000 using XDA Premium 4 mobile app

rjt.rockx said:
Yeah... But once I upload the ROMs which I am building, some more will definitely visit.
Click to expand...
Click to collapse
Is there any way to change the on-screen soft keys to look them like that of Nexus 5 lollipop soft keys.They look really cool and other thing is the transparency of the on screen buttons.It would be great if you made this above mod in the new ROM
Sent from my Karbonn Titanium S5 Plus using XDA Premium 4 mobile app

algates said:
Hi rjt.rockx.....Thank you very much for ur hard work to make our device pretty awesome....
Plz make the ext. Sd card as main storage bcoz 2gb space s not enough for application itself.......
Wishing u all the best in ur current n future projects....:beer::beer::beer:
Sent from my GT-N8000 using XDA Premium 4 mobile app
---------- Post added at 01:21 AM ---------- Previous post was at 01:17 AM ----------
Currently am using xperia v2 rom....everything works pretty good n smooth.........Eagerly waiting for ur future updates.......And one more thing , camera quality s not that good in low light. So any changes will be pretty nice too....
Sent from my GT-N8000 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Yeah, I'm working on that. You know that camera you have in other Xperia devices with all that Timescape feature and everything ? I'm adding that to the updated version of this ROM. But, the ROM will still be based on Android Jellybean 4.2.2. I'm sorry, but there's nothing I can do about that because, if I change the base OS, I'll have to rebuild all the apps from scratch to fit alongside the new permissions and all that stuff, which will take off most of my time.
I'll consider your decision about the Main Storage, but there's one drawback about using it that way. You won't be able to remove your SD Card or unmount it while the OS is on. If that's okay with you, please reply. Anyway, if you want to change it afterwards, you can do so by the vold.fstab edit which cybercrawler had mentioned here : http://forum.xda-developers.com/showpost.php?p=55154053&postcount=31
Thanks for your opinion, by the way !

[Q] Rooting Xperia E3 D2203 (4.4.4)

Hello everyone... I recently updated my phone to 4.4.4 via flashtool. It's obvious that it's unrooted now as it's on stock kernel. Is there any chance that anyone is going to make a custom kernel to root D2203 variant with 4.4.4 installed?? Plz let me know asap. Badly need root. Storage issues. Gotta need Link2SD for moving apps and removing bloatware for storage restoration. And it's a root demanding app as you know. Thanks.

ShanePunk123 said:
Hello everyone... I recently updated my phone to 4.4.4 via flashtool. It's obvious that it's unrooted now as it's on stock kernel. Is there any chance that anyone is going to make a custom kernel to root D2203 variant with 4.4.4 installed?? Plz let me know asap. Badly need root. Storage issues. Gotta need Link2SD for moving apps and removing bloatware for storage restoration. And it's a root demanding app as you know. Thanks.
Click to expand...
Click to collapse
see it, and next time search before asking.
http://forum.xda-developers.com/showpost.php?p=58407747&postcount=1

pedroj666 said:
see it, and next time search before asking.
http://forum.xda-developers.com/showpost.php?p=58407747&postcount=1
Click to expand...
Click to collapse
Hey thank you for sharing the link. But I already got rid of the problem. Help appreciated.

Hello everyone . I need some help with something. I did a partition of my sd card for link2sd. But when I go to re create mount scripts I've tried with every extention ext2 3 4 fat32 fat16 but I get the same error evewyime. Mount script cannot be created mount operation not permitted.what could be the cause of this??? Plz help ASAP. Phone is fully rooted with su version 2.46.
Sent from my D2203 using XDA Free mobile app

Try to partition using cwm recovery

ShanePunk123 said:
Hello everyone . I need some help with something. I did a partition of my sd card for link2sd. But when I go to re create mount scripts I've tried with every extention ext2 3 4 fat32 fat16 but I get the same error evewyime. Mount script cannot be created mount operation not permitted.what could be the cause of this??? Plz help ASAP. Phone is fully rooted with su version 2.46.
Sent from my D2203 using XDA Free mobile app
Click to expand...
Click to collapse
Does this:
install "MiniTool Partition Wizard Free" then creates two partitions.
VERY IMPORTANT, defines the 2 partitions as PRIMARY.
sees the attachment.

ShanePunk123 said:
Hello everyone . I need some help with something. I did a partition of my sd card for link2sd. But when I go to re create mount scripts I've tried with every extention ext2 3 4 fat32 fat16 but I get the same error evewyime. Mount script cannot be created mount operation not permitted.what could be the cause of this??? Plz help ASAP. Phone is fully rooted with su version 2.46.
Sent from my D2203 using XDA Free mobile app
Click to expand...
Click to collapse
Are you sure that your system is prepared to mount system as r/w?
Are you using the Universal init.d to achieve the full root?

pedroj666 said:
Are you sure that your system is prepared to mount system as r/w?
Are you using the Universal init.d to achieve the full root?
Click to expand...
Click to collapse
Ya I using universal init.d. For now I have dropped the idea of creating partitions. There is no cwm kernel in my system. Maybe Root isn't working properly. I'll wait till someone develops a kernel for D2203 (4.4.4). that way root will work normally. Till then I'm just using it to convert some of the system apps to user apps and moving them to sd card. things are going fine for now. Got 1.4 gb free in internal. So let's wait and see if someone finally releases the cwm recovery for my model. Thanks btw.

ShanePunk123 said:
Ya I using universal init.d. For now I have dropped the idea of creating partitions. There is no cwm kernel in my system. Maybe Root isn't working properly. I'll wait till someone develops a kernel for D2203 (4.4.4). that way root will work normally. Till then I'm just using it to convert some of the system apps to user apps and moving them to sd card. things are going fine for now. Got 1.4 gb free in internal. So let's wait and see if someone finally releases the cwm recovery for my model. Thanks btw.
Click to expand...
Click to collapse
I have 4.4.4 on D2203 with full root and without cwm. I have the "Link2SD Plus" working perfectly without any requirement of cmw!
My D2203 has the boot loader unlocked, does not have any cwm recovery installed, and only use the "Universal init.d" to run the "SYSTEM MOUNT FIX" so you can use without restriction "Link2SD Plus!
If you are not able to create links to the second Partition is because you are doing something wrong!

pedroj666 said:
I have 4.4.4 on D2203 with full root and without cwm. I have the "Link2SD Plus" working perfectly without any requirement of cmw!
My D2203 has the boot loader unlocked, does not have any cwm recovery installed, and only use the "Universal init.d" to run the "SYSTEM MOUNT FIX" so you can use without restriction "Link2SD Plus!
If you are not able to create links to the second Partition is because you are doing something wrong!
Click to expand...
Click to collapse
Ya you're right. I am probably doing something wrong. could you guide me thru the process which u applied for gaining system -rw ?? becoz I followed this guide
Fixing ability to mount system as r/w for D2203,D2206,D2243 (LTE)
THIS IS REQUIRED TO INSTALL XPOSED OR LINK2SD OR OTHER APPS WHICH WRITE ON SYSTEM
UPDATED
important - goto settings=>about phone tap on build number until it say,s no need,you are already a devloper. Then go back and open developer options and enable usb debugging
Step 0 - install BusyBox installer and Universal Init.d
Step 1 - Download this SYSTEM MOUNT FIX.zip and extract and run runme.bat
Step 2 - Now Open Universal Init.d Change Switch From Off to On
Step 3 - Now reboot and install busybox. (if busybox install it mean success and if it fail then ask me about it)
Now you can mount system as rw!!!
And according to it, I did everything written in it. Did i do some step wrong?
What all do you do in Universal Init.d? Because I only turned the switch on after runnnig the batch command in the computer from the post of vinay.. the developer. So if you could plz guide me thru the steps which you took after installing 4.4.4 and Superuser. Coz I'm also using Link2sd plus . I suppose that size of the SD card doesn't matter right? Because I'm making partition of 1 gb out of a 2 gb SD card.

ShanePunk123 said:
Ya you're right. I am probably doing something wrong. could you guide me thru the process which u applied for gaining system -rw ?? becoz I followed this guide
Fixing ability to mount system as r/w for D2203,D2206,D2243 (LTE)
THIS IS REQUIRED TO INSTALL XPOSED OR LINK2SD OR OTHER APPS WHICH WRITE ON SYSTEM
UPDATED
important - goto settings=>about phone tap on build number until it say,s no need,you are already a devloper. Then go back and open developer options and enable usb debugging
Step 0 - install BusyBox installer and Universal Init.d
Step 1 - Download this SYSTEM MOUNT FIX.zip and extract and run runme.bat
Step 2 - Now Open Universal Init.d Change Switch From Off to On
Step 3 - Now reboot and install busybox. (if busybox install it mean success and if it fail then ask me about it)
Now you can mount system as rw!!!
And according to it, I did everything written in it. Did i do some step wrong?
What all do you do in Universal Init.d? Because I only turned the switch on after runnnig the batch command in the computer from the post of vinay.. the developer. So if you could plz guide me thru the steps which you took after installing 4.4.4 and Superuser. Coz I'm also using Link2sd plus . I suppose that size of the SD card doesn't matter right? Because I'm making partition of 1 gb out of a 2 gb SD card.
Click to expand...
Click to collapse
Does the following:
1 Flash any firmware (18.5.C.0.19 UK)
2 Download and copy to the root of the sd card SuperSU.zip
3 Connect you phone to your pc in Fastboot mode (Turn off your phone and connect usb while pressing vol up)
4 Click on SELECT KERNEL TO FLASH KERNEL CHOOSER WINDOW will open now click on *.sin and change it to *.img Now Select BOOT_D2203_4.4.2.img(Click Here To Download BOOT_D2203_4.4.2.img) and select open KERNEL WILL BE FLASHED
5 Now disconnect USB and press power button on phone. Phone will vibrate with purpule notification light press vol up and down untill you see CWM recovery.
6 Select INSTALL ZIP IN CWM
7 Select 2nd option which is chose zip From /S..... now navigate to UPDATE-SuperSU-v1.zip and press power button.
8 now go back to first page and go to Advance and choose Power Off option --> Fix Root and then connect usb press vol down.
9 You will see Flashtools say Device Connected in FlashMode Now click on Thunder Button.
10 And select FLASH MODE and Click OK Select Firmware and in Wipe Menu Remove mark From CACHE AND DATA and in Exclude Menu Mark All but not Kernel. Now Click on Flash button.
11 After Flash Remove USB and Boot Device.
After all this, we only have half "root"!
Now we get the full root!
IMPORTANT- goto settings=>about phone tap on build number until it say,s no need,you are already a devloper. Then go back and open developer options and enable usb debugging
Step 1 install Universal Init.d
Run the Universal init.d (it is normal for error!)
Step 2 - Download this SYSTEM MOUNT FIX.zip and extract and run runme.bat
VERY IMPORTANTE! RUN MULTIPLE TIMES THE "RUN ME" TO STOP APPEARING ERROR MESSAGE! (I RUN 3 TIMES!)
See the attached image
Step 3 - Now reboot and install busybox. (if busybox install it mean success and if it fail then ask me about it)
If you followed all the steps correctly should appear in the list of scripts "Universal init.d" something called "NS".
Good luck and excuse my English.
google translator!

D2203,D2206,D2243 anyone provide me kernel.sin from ftf file of firmware 18.5.C.0.19 4.4.4 kitkat.
i need it to make cwm recovery kernel for you guy,s

vinay said:
D2203,D2206,D2243 anyone provide me kernel.sin from ftf file of firmware 18.5.C.0.19 4.4.4 kitkat.
i need it to make cwm recovery kernel for you guy,s
Click to expand...
Click to collapse
Is this what you needed? I extracted the kernel.sin file by opening the ftf file using winrar. I have attached it.

ShanePunk123 said:
Is this what you needed? I extracted the kernel.sin file by opening the ftf file using winrar. I have attached it.
Click to expand...
Click to collapse
Yes,
That what i need.
Is this from 18.5.C.0.19 firmware.
Sent From My Sony Xperia E3 dual.

yup it is... D2203_18.5.C.0.19_Customized_UK this is the file's name.

ShanePunk123 said:
yup it is... D2203_18.5.C.0.19_Customized_UK this is the file's name.
Click to expand...
Click to collapse
Do you know how to fix softbrick.
Cause i need someone to test kernel.
All you gotta do is
If kernel won't boot then flash stock
If your reply is yes then i will pm you a test build.
Sent From My Sony Xperia E3 dual.

vinay said:
Do you know how to fix softbrick.
Cause i need someone to test kernel.
All you gotta do is
If kernel won't boot then flash stock
If your reply is yes then i will pm you a test build.
Sent From My Sony Xperia E3 dual.
Click to expand...
Click to collapse
yes...

ShanePunk123 said:
yes...
Click to expand...
Click to collapse
I will sent you kernel in next few hours or tomorrow morning.
Mediafire upload or Googledrive.
Sent From My Sony Xperia E3 dual.

alright.. Not a problem...

ShanePunk123 said:
alright.. Not a problem...
Click to expand...
Click to collapse
I sent you kernel.
Test and reply.
ASAP.
Sent From My Sony Xperia E3 dual.

Internal Memory mod for QMobile Noir X900

Hello guys, once again I present you with a mod for our local QMobiles, this mod actually replaces your system files so you are able to use 4GB memory AND 8GB from V2, and are able to move apps to SD too!
Me or anyone mentioned in this post is not responsible for anything that happens to your phone. You choose to flash this mod, you are responsible
Click to expand...
Click to collapse
Prerequisite:
1) A rooted phone
2) Custom recovery
3) This mod.
4) Brain
How to:
Boot into recovery
take a backup
Flash the zip
Factory reset
Reboot recovery
Restore /data partition
NOTE: You need to flash this mod once only, as this isn't inuded in system or data! So custom ROMs won't affect it
Happy modding, good luck

CREDITS:
Me - created the zip
Nibras Ahmed, thanks mate!
Tested by: Mohsin - V1
Digi Drago for idea of V2

DOWNLOAD

Tested and working,
Remember to take cwm backup first, install zip, factory reset, reboot recovery, restore backup. reboot and enjoy

MZ_. said:
DOWNLOAD
Click to expand...
Click to collapse
whats the difference between these 2 mods ???

imkhalid said:
whats the difference between these 2 mods ???
Click to expand...
Click to collapse
MZ_. said:
this mod actually replaces your system files so you are able to use 4GB memory AND 8GB from V2, and are able to move apps to SD too!
Click to expand...
Click to collapse
You must read the description first.
Sent from my LG-E975 Int'l

MZ_. said:
You must read the description first.
Sent from my LG-E975 Int'l
Click to expand...
Click to collapse
ok i get it now, v1 will make 4GB apps space and v2 will make it 8GB
one more thing screenshots are too small cant see clearly

imkhalid said:
ok i get it now, v1 will make 4GB apps space and v2 will make it 8GB
one more thing screenshots are too small cant see clearly
Click to expand...
Click to collapse
Click on the pictures to expand em
Sent from my LG-E975 Int'l

Plz anyone tell is this phone worth buying? I mean the specs mentioned are genuine? The pixels of camera shows that it has 8MP rear camera while they say it's 13MP shooter.

2 questions:
1. for custom recovery, can I use the method "CWM Touch Recovery For QMobile X900 High" mentioned here -> http://mgeeky.com/root-and-install-cwm-touch-recovery-on-qmobile-x900/
2. can you please post more details of step-3 as its a little confusing since I think there are more advanced function in the new CMW. A step by step guide would be very helpful.

jamaljan said:
2 questions:
1. for custom recovery, can I use the method "CWM Touch Recovery For QMobile X900 High" mentioned here -> http://mgeeky.com/root-and-install-cwm-touch-recovery-on-qmobile-x900/
2. can you please post more details of step-3 as its a little confusing since I think there are more advanced function in the new CMW. A step by step guide would be very helpful.
Click to expand...
Click to collapse
1) That's okay
2) Install zip > chose from SD > locate to where your zip is > hit yes > follow next steps.

managed to install the 7gb partition but now when am accessing kingroot its saying that my phone is not rooted and when i try to root it, it fails... :S
---------- Post added at 10:33 PM ---------- Previous post was at 10:15 PM ----------
also, quite strangely, now I only see 6.67GB when I connect my cellfone with laptop
please, I think i've messed up things - even the bloody dialer is giving me errors...

jamaljan said:
managed to install the 7gb partition but now when am accessing kingroot its saying that my phone is not rooted and when i try to root it, it fails... :S
---------- Post added at 10:33 PM ---------- Previous post was at 10:15 PM ----------
also, quite strangely, now I only see 6.67GB when I connect my cellfone with laptop
please, I think i've messed up things - even the bloody dialer is giving me errors...
Click to expand...
Click to collapse
Wipe the data.

managed to get the system working. Installed the stock rom and everything is working fine now - but strangely the partition size has decreased to around 4gb.
All is well now

kindly help me regarding q mobile x900
i followed every instruction but after rebooting nd installing recovery.img from mobile uncle tools i takes me back to stock boot mode i mean i am unable to install cwm in my qmobile x900 its 16gb variant

anybody can do this with my mobile. i had tryied alot but just wastage of time did not successed

shortcut
Don't you guys know about any app or any shortcut? this method is too tough and risky for my phone..