Database Info

[ROM] Flytouch2 Froyo [Stragulus]

Froyo NAND ROM for Flytouch2 by Stragulus
Video demonstrating how to flash the tablet after having created the bootable SD-card: http://www.youtube.com/watch?v=47kf4-Vbba8#t=3
RELEASE NOTES
Please provide feedback if things work, or do not work for you.
If it eats your tablet, don't blame me. I deem it low-risk though, if it fails you can reflash it using burntool or another bootable sd-card just like before.
INSTALLATION
Installation is slightly different from normal releases because it requires flashing in 2 steps. Luckily, it's really easy:
1. Download bootable SD-card image and unzip: http://www.mediafire.com/?4quqzqyce9eje7a
2. Write image to an SD-card that's at least 1GB in size using WinHex:
Get WinHex here: http://www.winhex.com/winhex/
In WinHex: tools, disk tools, clone disk
Choose file from zip (sdcard.img)
Choose the sd card as your destination
Start sector: fill in 0, also make sure the directories are correct on left
When finished, take out the card.
In linux, you just unzip the file and use dd to write it to the sd-card:
Code:
dd if=/path/to/sdcard.img of=/dev/sdX # (where sdX is your scsi disk device, check dmesg)
3. Turn off tablet and put sd-card in TOP slot (between the 2 usb ports).
4. Turn on tablet. It will report that it is booting off the sd-card, and that it's flashing kernel + filesystems.
5. Take out the sd-card when the tablet asks you to do so (takes less than a minute). Put it in the OTHER sd-card slot (bottom one), and reboot the tablet by holding down the power for 10 seconds to turn it off, then press it again to turn it on.
6. You will now see the tablet booting with a *GREEN* screen. The screen will flash twice to indicate it's starting. The flashing itself will take longer than in the previous step, a few minutes. If succesful, it will automatically reboot, after which you're done and you're booting the new firmware! You'll see a different boot screen (equalizer on a black background)
7. After it has booted and you have unlocked the screen, reboot the tablet first thing! First boots in android always tend to be behave erratically. This is unrelated to this firmware and applies to all Android setups.
If step 6 fails (which is very unlikely), it will stay on the green screen and it will keep on flashing the screen. In that case, you'll have to turn it off. Most likely problem for this is a corrupt SD-card. See troubleshooting below.
Make sure to never put that sd-card back in the top-slot without erasing it first, as it will reflash your tablet!
TROUBLESHOOTING
The 'green screen' keeps flashing!
The installer will dump a text file on the root of the sd-card which you can inspect. The file is called fail_reason.txt. If no such file exists, things are seriously wrong and the tablet couldn't even properly write to the sd-card. If using another SD-card, or rewriting the SD-card doesn't help, please upload the fail_reason.txt file here.
Flashing was succesful, but the system doesn't boot up!
The installer dumps one or more text files on the root of your sd-card during the 'green screen' flashing stage. Upload all these files and link to them here.
TODO
Find out why some users can't get past the android boot animation despite seemingly succesful flashing
Rewrite instructions for creating the sdcard @ windows
Figure out why Titanium Backup doesn't work
(**) Tested:
wifi, ethernet port
battery status works, g-sensor works
touchscreen works (precalibrated, you cannot recalibrate it using the settings app)
HD video playback works (I recommend Meridian player)
Market works (full)
angry birds works ( thought I'd mention it )
The firmware has already been rooted! You can connect using adb over wifi, and type 'su' to become root. Find your IP address using the Android System Info app.
GPS confirmed

Tablet details:
CPU: InfoTM IMAPX220 1GHz CPU ARM1136
Display: 10.2” (WXVGA 1024×600 ) LCD (26M)
RAM: 256MB DDR2 / ROM: 2GB
Camera: 1.3M
GPS: HopeRF XN203
Wifi: AzureWave 802.11B/G
Battery: 3800mah
Adapter: 9V 2/5A
2x USB
1x RJ45
1x HDMI
2x MicroSD
1x Stylus-slot
- Vibration
- Accelerometer
Dimension: 269.91mm*170.45mm*14.89mm 700gr
Buttons: Back, Home, Menu, Volume, Wifi, Reset and Power
Also known as
- FlyTouch II
- SuperPAD
- WOWpad
- WWE10
- PC1002I
- HyPE-Pad
- ZH10X2
- APad GF10
- CEM111
- Daystar MD10
- Careeror CM10104

Is it really a 1ghz cpu this time?
Cause, i heard it was only 800mhz and wasn't cortex a8

flyboyovyick said:
Is it really a 1ghz cpu this time?
Click to expand...
Click to collapse
You can look up the specs here.

Just got one yesterday, and so far I would say it is a very nice unit.
Everything is very responsive compared to other android tablets I have tried.
The book reader is very nice, and the video player is great. Played a 900mb divx movie without a hitch.
Market works good on this unit also.
My only problem is that when I try to run the system update.apk that came on the unit it asks for a license. A 20 digit code. If I select register later it will not allow for update check because it says it is an unincorporated device.
Like I said earlier market works fine, have downloaded several apps.
I even tried the market fix for the Zenithink ZT-180 from this forum hoping if I inserted a new androidID I could check for updates. No luck.
Any ideas?
Do you know where I can find updates and roms for this unit on the internet?
I got the system update.apk from the root and thought maybe I could check somehow where it was pointing the tablet to look for the updates. Is this possible?
I am currently running dory-r2.1.925 and kernel 2.6.32.9 [email protected] #1

cjadams51 said:
Just got one yesterday, and so far I would say it is a very nice unit.
Click to expand...
Click to collapse
Nice to hear! Your problem with the license-code is a known issue, many people have that problem. Just ignore for it now, the manufacturer said their will be a new ROM which doesn't ask for it.

Thanks for providing a resource for this machine.
Will the rom updates be posted here when they are made available or can you direct me to the manufacturers website, as I can not update via the system update app?

ROM's will be posted here, but those websites are:
Gome www.gome.com.cn
InfoTM www.infotmic.com.cn
As soon as there is a new ROM, i will update this topic.

Just ordered one. I sent back my broken ZT-180 and they are sending me a discounted FT2. A few questions:
1) The ZT-180 didn't have a true sleep mode. Does this?
2) The ZT-180 only has a 3-Axis accelerometer, making it useless for apps and games that use the g-sensor (it just has screen rotation). How's this one?
3) How's the battery compare? The last one was terrible.
4) Does it seem faster? Slower? Same?

Zap! said:
1) The ZT-180 didn't have a true sleep mode. Does this?
Click to expand...
Click to collapse
I am not sure. I haven't received mine yet.
Zap! said:
2) The ZT-180 only has a 3-Axis accelerometer, making it useless for apps and games that use the g-sensor (it just has screen rotation). How's this one?
Click to expand...
Click to collapse
I believe its the same (also also 3-Axis).
Zap! said:
3) How's the battery compare? The last one was terrible.
Click to expand...
Click to collapse
ZT-180 has 2000mAH, this one has 3800mAh, so it's almost double!
Zap! said:
4) Does it seem faster? Slower? Same?
Click to expand...
Click to collapse
Exactly the same CPU speed.

Drazix said:
I am not sure. I haven't received mine yet.
I believe its the same (also also 3-Axis).
ZT-180 has 2000mAH, this one has 3800mAh, so it's almost double!
Exactly the same CPU speed.
Click to expand...
Click to collapse
Hmm, really hope the accelerometer works in games and it has a sleep mode. Lemme know when you get it please.

Zap! said:
Lemme know when you get it please.
Click to expand...
Click to collapse
It's already shipped, so I get it in 3 days. But maybe 'cjadams51' can provide this info sooner.

It's a bit of an odyssey to order one here in Germany, but I started collecting material and info related to the FlyTouch2:
onderka.com/inhalt/gome-flytouch2-android-tablet/
The system/board-codename is "Emma", and I'm so curious how development of this thingy will turn out.

On this site that sells the FT2, I asked the following and got answers:
Does the g-sensor work in games, or does it just have auto-rotation?
Does it have a sleep mode?
Administrator yes, it can play g-sensor games.
yes, it has sleep mode also.
Thanks
Click to expand...
Click to collapse

That's strange, because the same page lists the following specification:
gravity sensor
3 direction
Click to expand...
Click to collapse
And 3 axes = no games

Anyone got some informations about of there will be a constant firmware improve like the zt-180? And if there maybe release the code

Gsensor works fine in the game labyrith. The screen however when playing this game does not display in full screen mode, only about quarter screen. I assume because it was designed for phone, but gsensor seems as responsive as playing it on my phone. The only draw back to the tablet so far is the battery life could definitely be better. I have not messed with gps that much. I am also trying to get it to work with my 3g mobile broadband card. I have a 595u card from sprint. Would love to be able to plug into usb and have internet on the go.
Any suggestions to get this going. When I plug in it is not reconized in the 3g settings.
Really enjoying ebook reader and movie player.
Not sure what you mean by true sleep mode. It does seem to go to sleep (screen turns off) when inactive.
In fact using it now on wifi to browse this forum hoping for rom update.

Drazix said:
That's strange, because the same page lists the following specification:
And 3 axes = no games
Click to expand...
Click to collapse
cjadams51 said:
Gsensor works fine in the game labyrith. The screen however when playing this game does not display in full screen mode, only about quarter screen. I assume because it was designed for phone, but gsensor seems as responsive as playing it on my phone. The only draw back to the tablet so far is the battery life could definitely be better. I have not messed with gps that much. I am also trying to get it to work with my 3g mobile broadband card. I have a 595u card from sprint. Would love to be able to plug into usb and have internet on the go.
Any suggestions to get this going. When I plug in it is not reconized in the 3g settings.
Really enjoying ebook reader and movie player.
Not sure what you mean by true sleep mode. It does seem to go to sleep (screen turns off) when inactive.
In fact using it now on wifi to browse this forum hoping for rom update.
Click to expand...
Click to collapse
Well, that could only mean one of two things:
1) It's incorrectly listed as 3-axis.
2) It is what I've suspected all along. That Zenithink, with their 3-axis ZT-180, got it wrong when they blamed it on the g-sensor. The ZT-180 can indeed make use of the g-sensor in games, it's just Zenithink's incompetence that's holding it back.
As for true sleep, the ZT-180 doesn't have one. When it times out, the screen goes darker but there's still some light. It never goes totally black unless the unit is powered off, or dead.

Zap!: It's not one of two things, it must be both things
cjadams51: Can you tell more about the battery life? How many hours can you use it?

Drazix said:
Zap!: It's not one of two things, it must be both things
cjadams51: Can you tell more about the battery life? How many hours can you use it?
Click to expand...
Click to collapse
The battery life varies of course depending on what your doing. w/ wifi on and surfing maybe 1.5 - 2 hours. As an ebook reader with no wifi over 2 hours.
I am also noticing that the battery gauge is a little sporadic and does not seem always be dependable or accurate. I need to install a battery info app, so I can get a better idea.
The gauge currently reminds me of sometimes when I install a new rom on my mt3g the battery guage seems to be sporadic before it settles down and becomes a more reliable. Still getting a feel for it. It could also be that I am using a little more than I think, I just know that I've gotten hit with the 15% battery warning several times, and it seems like I had not been using it that much.

[Q] what kind of device i have? i m going to brick it?

i bought a chinese tab, now it as a faked android 2.2 (it's 2.1 but it just say 2.2)
touchscreen sensitivity is horrible, and now with this problem is unusable.. so i want to try to flash the correct android 2.1 firmware but i dont know wich one!
My device is a telechip 720mhz pad (seen using setcpu) i can only see that the nand free space size is 2,97gb (when connected to pc as ext disk) it has no ON/OFF SWTICH! only a thin hole to push for reset. It has 1 mini usb (2.0), 1 usb (1.0), 1 hdmi out, 1 3.5jack out, 3 button for navigate + 1 main button (like ipad) that can power on/off (keep pressed) or just put device in stand by (short press).
It's a 2 point touch screen and don't know how to verify ram, i only know i have 50-70 mb free when idle. I has also 360° sensor movement, and a cheap camera.
i bought it from sunsky-online and it' called hw-702t on the website, but on the manual it's called hw-701t, and some pages later it's called mid701
can some one please help me? THANKS!
edit: i found it on ebay, there are some photos to help you identify it!
cgi.ebay.it/Tablet-PC-aPad-ePad-Android-2-2-WiFi-4GB-7-Camera-NEW-/250749268998

test and Ok
Hi I also have one of these there is a firmware on the internet works wonderfully q
arqeuivo name and t8902 (S22) or search for 702t firmware q will appear in google what do you want
w³.androidtablets.net/forum/telechips-based/6959-firmware-problem-hw-702t-telechips-8902-a.html[/url]
good luck

chbend said:
Hi I also have one of these there is a firmware on the internet works wonderfully q
arqeuivo name and t8902 (S22) or search for 702t firmware q will appear in google what do you want
w³.androidtablets.net/forum/telechips-based/6959-firmware-problem-hw-702t-telechips-8902-a.html[/url]
good luck
Click to expand...
Click to collapse
Hi!
I have a tablet HW-702T with the original FW, what's the FW that works wonderfully? I can not understand the link
Many thanks

CUBOT P9

Here i am starting a new thread for the Cubot P9
Android 4.2 with 1.2GHZ MTK6572W Cortex-A7 Dual-core processor and 512MB RAM + 4GB ROM
Support 3G: WCDMA 850/2100MHz- 2G: GSM 850/900/1800/1900MHz
5.0 inch large capacitive screen with 960*540 pixels QHD screen resolution
8.0M Pixels High definition back camera with Auto Focus and flashlight, front 2.0M camera
Light sensor, Gravity Sensor, Proximity sensor
Supports Android Navigation, built-in GPS navigation with A-GPS assisted, makes the positioning swiftly and accurately
Supports APK format Android game and applications, such as Bebbled, Angry Birds, What’s app, Line
WiFi + Google Maps + FM + Bluetooth + Ebook + Email + Gmail + Messaging + Wallpapers + Calendar + Calculator + Clock + Alarm + World Clock + Camera + Tethering & Portable Hotspot
I will post any Roms/firmware-roots-information as i find it.
please add anything you want or any questions.
Lets get this thread started.......

Firmware/rom
Title: Cubot P9 STOCK ROM JB4.2.2
Listed: 11/25/2013 2:25 pm
ROM Version: G306_CUBOT_A1_V1.3_2013091
available here:http://www.needrom.com/mobile/cubot-p9-stock-rom-jb4-2-2/
plus flashtool.
Title: Cubot P9
Listed: 11/23/2013 6:11 pm
ROM Version: ROM Android 4.2.2
avalable here:http://www.needrom.com/mobile/cubot-p9/
You will need to register only takes 2 mins.
FLASHTOOL TUTORIAL/HOW TO FLASH FIRMWARE/ROM
http://forum.xda-developers.com/showthread.php?t=1982587
I HAVE RE-UPPED ALL FILES TO MEGA.
SP FLASH-TOOL MT6572- https://mega.co.nz/#!hx1liRbb!MW_XUQZSOPHJSJsqVf3UmGGtEiB3MGhN3QtrXg5heoA
CUBOT P9 STOCK ROM 21/12/13-(flash using flashtool)- https://mega.co.nz/#!xwl0yZxZ!RWyB_XsRKonOYVBpdZ1e6Q0PCZMKGPki3_caw0Yxmak
ROOT-i HAVE SUCCESSFULLY ROOTED MY P9 USING "FRAMEROOT"
AVAILABLE HERE:http://forum.xda-developers.com/showthread.php?t=2130276
Once rooted install "GooManager" from google play as it may install TWRP for you.But i have not tested yet so unsure
.https://play.google.com/store/apps/details?id=com.s0up.goomanager&hl=en_GB
GOOGLE USB DRIVERS= http://developer.android.com/sdk/win-usb.html

hi
I also have cubot P9. Made a recovery for him but it's inverted.
You can try it downloading from h...s://docs.google.com/file/d/0B_LzOjvUsn4ddXQyZWtmNGdwcDA/edit?pli=1
It must be flashed from SP-Flash-Tool-MTK6572, Mobileuncle MTK Tools doesn't work correctly (remember, i take no responsability for any kind of brick/damage do it at your own risk).
Cheers

Hi
DG300 has the same specs of the P9 so the rom might work. what you think?

P9 and roaming
Hi SAS007, I just got my P9 today and I can't make any calls at all. I am with T-Mobile, put my sim in, switched on and all the T-Mobile settings came up Access Point Name, etc. I also get an 'r' on the signal indicator which I believe means roaming. Every time I try to make a call, I get a message saying that roaming isn't enabled. Have you had any similar issues? If so, how did you manage to get around them?
Many thanks.
notthenewsreader
sas007 said:
Here i am starting a new thread for the Cubot P9
Android 4.2 with 1.2GHZ MTK6572W Cortex-A7 Dual-core processor and 512MB RAM + 4GB ROM
Support 3G: WCDMA 850/2100MHz- 2G: GSM 850/900/1800/1900MHz
5.0 inch large capacitive screen with 960*540 pixels QHD screen resolution
8.0M Pixels High definition back camera with Auto Focus and flashlight, front 2.0M camera
Light sensor, Gravity Sensor, Proximity sensor
Supports Android Navigation, built-in GPS navigation with A-GPS assisted, makes the positioning swiftly and accurately
Supports APK format Android game and applications, such as Bebbled, Angry Birds, What’s app, Line
WiFi + Google Maps + FM + Bluetooth + Ebook + Email + Gmail + Messaging + Wallpapers + Calendar + Calculator + Clock + Alarm + World Clock + Camera + Tethering & Portable Hotspot
I will post any Roms/firmware-roots-information as i find it.
please add anything you want or any questions.
Lets get this thread started.......
Click to expand...
Click to collapse

notthenewsreader said:
Hi SAS007, I just got my P9 today and I can't make any calls at all. I am with T-Mobile, put my sim in, switched on and all the T-Mobile settings came up Access Point Name, etc. I also get an 'r' on the signal indicator which I believe means roaming. Every time I try to make a call, I get a message saying that roaming isn't enabled. Have you had any similar issues? If so, how did you manage to get around them?
Many thanks.
notthenewsreader
Click to expand...
Click to collapse
Hi mate.dont worry about the roaming thing.I noticed this on my device also.
when i went to make my first call i got the message that i was roaming etc..just okay it and use as normal the roaming R icon dissipated after a while.If your in the UK you can not have any problems roaming makes no difference...
Also in your data/network settings in the part for preferred networks select automatically choose/select network.

sas007 said:
Hi mate.dont worry about the roaming thing.I noticed this on my device also.
when i went to make my first call i got the message that i was roaming etc..just okay it and use as normal the roaming R icon dissipated after a while.If your in the UK you can not have any problems roaming makes no difference...
Also in your data/network settings in the part for preferred networks select automatically choose/select network.
Click to expand...
Click to collapse
Hi
It seems to be working great. Thank you ever so much.

Hello all P9 users
Managed to make a touch recovery based on Carliv Touch Recovery for our phone.
Only problem is that is upside down.
Here is the link
h...s://drive.google.com/file/d/0B_LzOjvUsn4dLVRXMEdrb2pUQWc/edit?usp=sharing
Enviado do meu W100 através de Tapatalk

Thanks dude I was wondering cause I couldn't find a forum where they would talk about the phone. Can you make video of how your phone ended up. Maybe put it on YouTube.
Sent from my SGH-T989 using Tapatalk

Doogee DG300 rom for cubot P9
I managed to flash trough recovery the Doogee gt300 rom to the P9.
Boot is from P9 and is rooted and insecured and seems that everything works. I think that this one is more smooth than the original one.:good:
:laugh:

Download from here https://drive.google.com/file/d/0B_LzOjvUsn4dR3gzU2xCWkQtRGs/edit?usp=sharing and put it on your sdcard
In recovery wipe data, cache, dalvik cache and after fo to update from sdcard and select zip you copy to sdcard
cheers

lloco73 said:
Download from here https://drive.google.com/file/d/0B_LzOjvUsn4dR3gzU2xCWkQtRGs/edit?usp=sharing and put it on your sdcard
In recovery wipe data, cache, dalvik cache and after fo to update from sdcard and select zip you copy to sdcard
cheers
Click to expand...
Click to collapse
Hi Iloco73,
this looks marvellous!
Which ldifferent languages is it containing?

piltes said:
Hi Iloco73,
this looks marvellous!
Which ldifferent languages is it containing?
Click to expand...
Click to collapse
It comes with the same languages of the P9 rom.

Great phone affordable price
Hi. I got mine from ebay and cost me about £70. I must say I didn't expected that but it is a great phone and still can not believe its price. I have no problems so far. It accepted my two sim cards straight away, my main one being on the Three UK network. The internet is much more faster than my previous Xperia Arc S. The battery life is great too. All day making calls and browsing the internet playing games etc. and still have got some left by the evening when I get home. This phone is a big joy and very affordable for students on a budget.
Have you guys tried flashing Android 4.4 KitKat stock ROM on the Cubot P9? I suspect that would increase battery life with 20% to 25%. If yes let me know please I would appreciate that.
Cheers

preloader.bin
Hello,
Could a kind soul dump and upload his cubot P9 preloader.bin ?
Tried the doogee ROM, screen was weird / all messed up so I reinstalled the stock rom at the top of this thread. The phone is half bricked now: phone starts only to show a blinking screen, in recovery or normal mode. SP Flash Tool is still working though.
I read that erasing the preloader on a MTK6572W can be messy, on some devices there appears to be some fixes. (Xolo A500s for example, see here http://forum.xda-developers.com/showthread.php?p=46735224)
I hope there's a solution for the P9 as well..
Thanks in advance!

some updates
managed to flash a custom recovery (rua1 autoCWM v5.5.0.4 for CUBOT P9)
Thing is it acts weird: whole lines are shaking, when I go up / down it goes directly from 1st line to the 3rd etc
I guess the LCD driver on my P9 is different (brand new P9, sticker inside says its from march 2014).
I would gladly appreciate it if someone could upload a full ROM dump of a similar P9.
Thanks,
tieum

Have you tried search the ROM on needrom?
There are some dumps of the original ROM over there.
Enviado do meu W100 através de Tapatalk

lloco73 said:
Have you tried swatch thesaurus ROM ontem needrom?
There are some dumps of the original ROM over there.
Click to expand...
Click to collapse
victory!
P9_CUBOT_A1_V1.5_20131216 on needrom is finally working
thanks!

tieumxda said:
victory!
P9_CUBOT_A1_V1.5_20131216 on needrom is finally working
thanks!
Click to expand...
Click to collapse
Glad to know you resolved it!

I've read wonderful reviews on this phone .Hoping to get one maybe next week.Would you guys recommend it?.I don't have a fortune to spend on a galaxy device and I'm not concerned about the camera ,so how is it guys?

Elephone P6S 6.3-inch MTK6592 1.7GHz Octa-core Smartphone

This thread will be for all fans of this big smartphone
Elephone P6S 6.3-inch MTK6592 1.7GHz Octa-core Smartphone
Description:
Elephone P6S smart phone comes with Android 4.2 Operating System, the MTK6592,1.7GHz Octa-core high-speed processing platform. 2GB RAM + 16GB ROM big memory is quite amazing and impressive. 1280 x 720P HD screen.With its 6.3 inch original sumsung mega display, capture life's moments in vivid detail with the built in HD camcorder, it empowers you with everying you can ever desire so that you can simply feel free. What is more,It is bulit in 8.0MP color camera on back with flash light and 2.0MP color camera in front . It Support Wi-Fi: IEEE 802.11 b/g/n, Bluetooth. Supports multi-language.
Basic Information
Model Elephone P6S
Style Bar
Color White, Black
Band 2G: GSM 850/900/1800/1900MHz
3G: WCDMA 850/2100MHz
Sim Card Dual SIM Card Dual Standby
Appearance PDA flat touch
System
OS Android OS 4.2.2
CPU MTK6592 1.7GHz Octa-core
ROM 16GB
RAM 2GB
Screen
Display Size 6.3 Inch
Type Original mega screen
Resolution 1280*720 pixels HD screen
Screen Color 16000K Colors
Support Format
Ringtones Type Support Polyphonic/MP3
Audio Format Support MP3/WAV/AMR/AWB
Music&Sound format Support AAC/AAC+/EAAC+/WAV/MP3/MIDI/AMR
Graphical Format Support JPEG/BMP/GIF/PNG
E-Book Format Support TXT/CHM/DOC/HTML
FM Radio Support, a 3.5mm earphones is needed
Card Extend Support micro SD/TF card up to 64GB
Data Transfer & Connectivity
Data transfer USB/Bluetooth
Mobile internet WAP/WiFi
General
Camera/Picture Resolution Dual Cameras, 2.0MP front camera, 8.0MP back camera with flashlight
Video screen 1080p Video records with sound
Language As the pictures show.
Message SMS/MMS
Phonebook 1000 Group
Input Handwrite/Keypad
Navigation Yes, Built-in GPS chip (GPS+AGPS)
OTG Support
WAP Browser Support
WIFI Yes, IEEE802.11b/g/n
Bluetooth Support V2.0/3.0/4.0
Multi-Touch Yes,5 point touch
Gravity Sensor Support
Light Sensor Support
Talk time 350-480 (Unit:Mins)
Standby time 200-250 (Unit:Hour)
Other Features 3G, WIFI, GPS, FM, Bluetooth, Ebook, Email, Messaging,wallpapers,calendar, calculator, clock, camera, OTG, etc
Dimensions 167*88*9.2mm
Net Weight(Including battery) 230g
Package Included 1 x Elephone P6S Smart Phone
1 x Battery
1 x USB Cable
1 x Earphone
1 x Charger
1 x Protector
1 x User's Manual

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Hi
I had order this same phone by AliExpress in Hong Kong yesterday befor.
It is, expect the CPU, similar to the Samsung Mega6.3 without LTE.
The memory is this what I could better use. I need not more Link2SD !
Are you interested in link to Samsung Mega6.3 forum in Adroidhilfe.de?
Much poeple they are very interested in this phone and your description.
Do you have this phone?
If you want to support so you can see at needRom. You can find a original Rom with flashtool and How to.
Thanks
Psimo_de
PS: Sorry for my bad english.

How much?

Augustine02 said:
How much?
Click to expand...
Click to collapse
Hi Augustine,
about $270 (witht DHL Express fee) This is 3-5 day by me.
I hope I receive it to suturday or monday.
regards
Psimo_de
Hi All its never here with experience for this Phone?
Never tested it?

Hi
I had order this same phone by AliExpress in Hong Kong yesterday befor.
It is, expect the CPU, similar to the Samsung Mega6.3 without LTE.
The memory is this what I could better use. I need not more Link2SD !
If you want to support so you can see at needRom. You can find a original Rom with flashtool and Howto.
I hope I receive this gadet at monday.
Who is here with experience for this Phone?
Is it tested, Where?
Nice weekend
Psimo_de

I'm looking to get one as well, as my main unit. 1.7ghz? octocore. Hope its good. How is yours going? This is the exact same size as a Galaxy Mega 6.3 right? As in physical dimensions - i can use all the normal mega 6.3 cases and screen protectors etc?

Anghel132 said:
I'm looking to get one as well, as my main unit. 1.7ghz? octocore. Hope its good. How is yours going? This is the exact same size as a Galaxy Mega 6.3 right? As in physical dimensions - i can use all the normal mega 6.3 cases and screen protectors etc?
Click to expand...
Click to collapse
Yes it is! But I still wait. I hope monday its received.
Only the big battery from MugenPower or CameronSino (6400mAh) has other connectors (only an a other place).
All other is going on with P6S.
Psimo_de
PS: @digitalac: I saw on your antutu-pictures it is OS 4.3.1? It is allrigth? How do you updated this, per OTA?
Its the same language-version? (multilanguage)
Thanks

Psimo_de said:
Yes it is! But I still wait. I hope monday its received.
Only the big battery from MugenPower or CameronSino (6400mAh) has other connectors (only an a other place).
All other is going on with P6S.
Psimo_de
PS: @digitalac: I saw on your antutu-pictures it is OS 4.3.1? It is allrigth? How do you updated this, per OTA?
Its the same language-version? (multilanguage)
Thanks
Click to expand...
Click to collapse
I bought from Banggood.com, and received with 4.3.1 multilanguage. This phone can be rooted with Root Genius.

Before root must be this installed on pc to be recognized.
http://www.china-devices.com/Thread-MTK6592-MTK6582-MTK6589-MTK6577-MTK6575-MTK6572-Drivers

digitalac said:
Before root must be this installed on pc to be recognized.
Hi,
I had never problems with the driver, my root is OK. I had from my old MTK6589T-Phone driver in my PC.
I rooted with RootGenius 1.9.2.
Thanks
regards
Psimo_de
PS: Where I can download the firmware for update?
Click to expand...
Click to collapse

Never had any issues with rooting my machine

I have the normal p6 with quad core phone
I hope for you guys that the p6s is better
Look at the p6 forum on mtkforums.com to see how horrible is
Verstuurd vanaf mijn ELephone P6 met Tapatalk

First time poster!!
Bought this phone and received it the other day.
I can't get USB OTG working though. I downloaded OTG checker and it failed, saying it is not OTG enabled.
Anyone able to get it working??
Also, a little annoyance, has anyone noticed that there is:
1) No way to stop the virbrating when typing sms/ internet address/ search - basically any typing is haptic touch vibrations. I can't find how to turn this off
2) If an sms is received, the screen does not light up, no lights flash to say a message was received so unless I open the screen, I would never know an sms was received. Same goes for email.
Has anyone found a way around these issues?
Thanks
irish

irishproduce said:
First time poster!!
Bought this phone and received it the other day.
I can't get USB OTG working though. I downloaded OTG checker and it failed, saying it is not OTG enabled.
Anyone able to get it working??
Also, a little annoyance, has anyone noticed that there is:
1) No way to stop the virbrating when typing sms/ internet address/ search - basically any typing is haptic touch vibrations. I can't find how to turn this off
2) If an sms is received, the screen does not light up, no lights flash to say a message was received so unless I open the screen, I would never know an sms was received. Same goes for email.
Has anyone found a way around these issues?
Thanks
irish
Click to expand...
Click to collapse
go to audio profiles
than click on general at right side with customizing
found system and disable vibrate on touch
is it now ok?

digitalac said:
go to audio profiles
than click on general at right side with customizing
found system and disable vibrate on touch
is it now ok?
Click to expand...
Click to collapse
Hi digitalac,
No, I already unticked the box when I got the phone but it doesn;t change the problem.
I still have haptic vibrating when typing anywhere on the phone (Internet browser, email, sms etc)
Do you have this problem?
irish

irishproduce said:
Hi digitalac,
No, I already unticked the box when I got the phone but it doesn;t change the problem.
I still have haptic vibrating when typing anywhere on the phone (Internet browser, email, sms etc)
Do you have this problem?
irish
Click to expand...
Click to collapse
no
i customized all preferencies
maybe this is what you need:
account-->personal--->language and input, open it and disable what you want

Oh that's brilliant. You're brilliant. Thanks for that

audio problem
thanks for this thread ,
I bought elephone p6s 2 weeks ago , it is amazing except 2 problems that make me unhappy with this phone . I wish you can solve these problems to me .
first , the audio volume is too low to hear , i set all audio setting to maximum but the volume still low . Even I can not hear any incoming calls as ringtone volume is too low I should make the speaker close to my ear to hear it , I tried many applications from play store to enhance volume butall are useless , I can not hear any mp3 file or video file when i play it , i tried many players like vlc and winamp and mobo player , all are useless . I google this problem and I found many people complain from this audio problem in many other phones which have android 4.3.1 , I bought elephone p6s with 4.2.2. but when I received it I found that it hase android 4.3.1. installed , I googled for ROM 4.2.2 but I did not found even in needrom.com , they publish a rom describing it as 4.2 but when I downloaded it and Flash it I found that it is the same 4.3.1 ROM ,Realy I am disappointed and I do not know How can I solve this horrible problem .
second , The camera . It supposed to be 8MP but i the quality is not so good , the quality is of 5 MP cameras .

I'd also like to say thank you for this thread. How would any of you owners of this device rate its wifi reception, compared to other phones?

Bricked Lenovo A806, don't now what to do.

A few days ago, I went to sleep and, as usual, I left my phone charging. In the morning, it didn't show any signs of life. It doesn't boot, no matter what. I supposed it's hard bricked.
I haven't changed any ROMs recently, so it could be a hardware issue but I have no way of checking. The computer recognizes it as a MediaTek Usb Port and the little red light lights up when charging.
What I've tried to do to fix this:
-Multiple combinations of button pressing and battery removal/insertion.
[*]-Charging battery with a battery charger.
[*]-Flashing stock rom with SP Flash Tool (Here is where it gets tricky):
I can't, no matter what, flash a ROM. Different versions of Flash Tools show different errors. The most recent shows error 4001. Some errors that also appear are 3186 and 8046. On one version I got it to do the EMMC Test and it shows that both EMMC and NAND Flash are not detected . Does it mean that there is a problem with the EMMC chip?​
Here are the specs of the phone:
Cellular
Technology
WCDMA (UMTS) / GSM
Type
smartphone (Android OS)
Integrated Components
FM radio, front-facing camera, navigation, rear-facing camera
Navigation
A-GPS, GPS
Band
WCDMA (UMTS) / GSM 900/1800
Mobile Broadband Generation
4G
Phone Form Factor
touch
Service Provider
not specified
Operating System Family
Android
Operating System
Android 4.4 (KitKat)
Input Device
Multi-touch, capacitive
Details
Integrated Components
Rear-facing camera, front-facing camera, FM radio, navigation
Body Color
Black
Miscellaneous
Color
black
Color Category
black
Body Material
plastic
Messaging & Internet
Messaging Services
MMS, SMS
Supported Social Networks and Blogs
Yes
Display
Technology
IPS
Display Resolution
1280 x 720 pixels
Diagonal Size
5 in
Diagonal Size (metric)
12.7 cm
Smartphone Diagonal Size
5 in
Color Support
color
Display Languages
Afrikaans, Arabic, French, German, Hebrew, Hindi, Hungarian, Icelandic, Indonesian, Italian, Korean, Latvian, Catalan, Macedonian, Malay, Norwegian, Persian, Polish, Russian, Serbian, Spanish, Swahili, Thai, Chinese, Ukrainian, Croatian, Danish, Dutch, English, Estonian, Filipino
Processor
Clock Speed
1.7 GHz
Processor Core Qty
8-core
Communications
Data Transmission
EDGE, FDD-LTE, GPRS, HSDPA, HSPA+, HSUPA, TDD-LTE
Data Transmission Operating Frequency
LTE 1800/2100/2600
Wireless Interface
Bluetooth, IEEE 802.11b/g/n
Camera
Camera Light Source
flash
Features
video recording
Multimedia
Graphics Accelerator
Mali 450 MP4
Memory
Supported Flash Memory Cards
microSDHC - up to 32 GB
Battery
Capacity
2250 mAh
Run Time Details
Talk (GSM): up to 600 min
Talk (WCDMA): up to 450 min
Standby (GSM): up to 276 hrs
Standby (WCDMA): up to 228 hrs
Digital Camera
Camera Light Source
flash
Features
video recording
Header
Brand
Lenovo
Product Line
Lenovo
Model
A806
Packaged Quantity
1
CE Input Device
Type
touch sensitive screen (multi-touch)
Touchscreen Technology
capacitive
Features
Phone Functions
call timer, conference call, speakerphone, vibrating alert
Additional Features
Alarm Clock
RAM
Installed Size
2 GB
Flash Memory
Internal Memory Capacity
16 GB
Max Supported Size
32 GB
Supported Flash Memory Cards
microSDHC
Graphics System
Graphics Accelerator
Mali 450 MP4
Optical Sensor
Sensor Resolution
13 megapixels
Front-facing Camera
Sensor Resolution
5 Megapixel
Dimensions & Weight
Width
2.8 in
Depth
0.4 in
Height
5.5 in
Weight
4.94 oz
General
Manufacturer
Lenovo
If someone could help me, I don't really know what else to try. I'll kindly provide any further information needed.
Thanks in advance.

(I'll do it once again, because when you want to reply to a post and you're not logged in, they tell you to log in first AFTER you've clicked on "Post Quick Reply", and your reply is gone...)
Did you store the ROM on your PC, or on the memory card? Also, did you check the latest ROM posted for your device on Needrom? (Here: https://www.needrom.com/download/miui-9-1-rotabator-miui-9-2-2-0-a806-808t/)

I stored it on my PC. Since I can't boot my phone, flashing a Rom using any kind of recovery is useless. I only tried 2 or 3 stock ROMs.

Worth a try anyway, if you ask me. ?

UglyStuff said:
Worth a try anyway, if you ask me. ?
Click to expand...
Click to collapse
What do you mean? There's no way to flash using recovery, I can't get into recovery mode. Unless you're saying to try a different ROM, which I now have done, and with the same results.

Try to replace the battery

Or simply remove it, then put it back into place. It seems to me that your bootloader is damaged, though. Provided your phone comes into the "soft brick" category, have you tried all the suggestions offered in this article?
https://www.makeuseof.com/tag/how-to-recover-bricked-android-phone/

AqyxHD said:
Try to replace the battery
Click to expand...
Click to collapse
I've tried using an old battery that I had (it didn't work well, but it did work) and no success.

Or simply remove it, then put it back into place. It seems to me that your bootloader is damaged, though. Provided your phone comes into the "soft brick" category, have you tried all the suggestions offered in this article?
Click to expand...
Click to collapse
I tried everything that I could in that article. I'll probably just give up and buy a new one.

Could be that the battery controller is toast. Maybe there was a power surge when you left to charge overnight, and your phone didn't like it. If it's a hardware problem, and given the age of your phone, buying a new one is probably the best option.

UglyStuff said:
Could be that the battery controller is toast. Maybe there was a power surge when you left to charge overnight, and your phone didn't like it. If it's a hardware problem, and given the age of your phone, buying a new one is probably the best option.
Click to expand...
Click to collapse
That's exactly my thought. Sending it to repair is not worth it by now.