[Q] Best T. Glass Screen Protector! - General Questions and Answers

Hello, I have information about the best tempered glass screen protector that I have found! I also have an important question at the end. I do NOT work for or get paid by any these companies.
The "iloome Samsung Galaxy S3(Blue) ScreenMate" is by far, the best tempered glass screen protector that I've ever used! It took me 2-3 months to find it and I'm so happy now! ='D
Ok, so I've tried the XGear Spectre. The responsiveness was a serious issue, same thing for the Seido Vitreo. The Vitreo left the worst smudges and fingerprints more than on all the screen protectors that I've ever tried, including normal film. I've also tried numerous film "plastic" screen protectors. The ArmorSuit MilitaryShield was my favorite until it had random wave-like defects. Zagg HD sucks. And I forgot the rest cuss they also sucked. Spigens is nice but not enough H on the hardness scale for me (and curved edge doesn't work with most of my cases and I want to protect the whole screen)
The iloome ScreenMate goes really close to the edge. More so than the Vitreo and, if my memory is correct, the Spectre as well. I think it stops right at the spot where the screen begins to curve (unless the whole screen is curved, then idk what I'm talking about) but it doesn't necessarily go RIGHT to the edge. However, as someone who really wants a full-screen protection with his phone, I am really satisfied. It's really smooth but not as smooth as the other tempered glass screen protectors (is there an abbreviation like t.glass sp? lol). It has a real SLIGHT resistance to it sort of like a film screen protector but I like it. There is more resistance when your fingers are wet. They shouldn't be wet in the first place when handling a phone but you know, life happens.
It took me a couple re-attempts to fit it perfectly but I got it pretty good. If the SP doesn't stick anymore I'll give it another shot cuss of my reattempts. The cutouts are really spot-on. As someone with an OCD-attention-to-detail-like personality (disclaimer: I'm not OCD, just blessed & cursed with "Eagle Eyes"!), I am 9/10 on the cutouts. The Home Button cut-out could be just a little smaller to help with accuracy when placing the SP (and technically, more protection of the screen and dust protection). I feel the same about the speaker and I think the proximity sensor cutout could be enhanced a little. HOWEVER, these are the tiniest details if we're looking at the realistic practicality of the SP. The fact that the notif. light, front camera, and sensors are covered with the see-through part of the SP is something that I love! It doesn't say Samsung which I kind of miss.
In the future, I see a t.glass sp with a mesh-like speaker cover/filter like you see in some rugged phone cases. And some sort of flexible home button. But anyway, back to the topic!
There are one or two problems with the screen protector, It doesn't work with the Kraken AMS, Ballistic MAXX, or Commuter... The AMS won't fit on the right way, the power buttons and volume buttons are off. Same with the MAXX, and the Commuter external poly case won't have a tight fit. The AMS lifts up the SP and caused some dust to go under so I cleaned and re-applied. I think the SP is a little too close to the edge for these cases. The Spectre and Vitreo worked fine with them though. And the second thing is that there are these tiny dots like a grid on the screen. I read that these dots help with accuracy and responsiveness with the phone and you. But you can only see them when the screen is turned off and you're holding the phone at a certain angle in the light. You can't see them when the screen's on or when you're in a dark room unless you hold it at an angle in the light. But honestly, I was worried at first but I don't even notice it now.
Well, I also bought ZeroLemon's 7000mAh extended battery and I FREAKING LOVE IT!!! Only problem is, the TPU case won't work with the screen protector... ='''( >XO
So it's one or the other. But I need (want) both! I've been using the battery without the case and it's not a good idea. Ha, so here's my question for you:
Is there a better tempered glass screen protector out there that works with rugged cases (like AMS, MAXX, etc.) and also works with "clip-on" cases like ZeroLemon's? I hate regular film SP's cuss most don't cover as much of the screen as t. glass does and they don't feel as nice as tempered glass.
If someone can mod a case to work with a tempered glass sp, and mainly mod it to work with ZL's 7000mAh battery, please let me know how I can make/buy/research one! I've looked through XDA and was unable in finding much.. I want to keep the ZL Battery cuss it's just what I need so if you know of a better SP let me know.
Also, what is the biggest sized battery that can fit the stock phone battery cover? And which battery (and mAh size) lasts 2 days (Morning of Day 1 to Nighttime of Day 2) if the ZL lasts me 3 days (Morning of Day 1 to Noon of Day 3)? Maybe if I get a smaller battery I can mod myself a case.
Please let me know as I would appreciate the info more than you would imagine! It would make me so happy! And maybe other people. Thank you everyone as I am relatively new to the awesome world of Android.
UPDATE: I seem to have found a case called "Laza" that's supposed to work with extended batteries. The full title of it is "Laza Samsung Galaxy S3 RuggedFusion Protective Case for Extended Battery Black/Blue (BATTERY + BACK COVER NOT INCLUDED)". You can find it on amazon on these 2 links from what I've seen:
http://www.amazon.com/s/ref=sr_gnr_aps?rh=i:aps,k:laza+rugged
http://www.amazon.com/gp/aw/d/B00BZGQ9A8
Also I have seen these posts regarding the case:
http://forum.xda-developers.com/showthread.php?p=41232920
http://forum.xda-developers.com/showthread.php?p=40449560
http://forum.xda-developers.com/showthread.php?t=2102546&page=138
What do you think? Does this case work with ZL's 7000mAh and a t. glass sp? What other options are there? I will update them on this thread and give the credit where credit is due.

Do you have any rainbow effects on the screen protector? I get a little rainbow in the center of the screen. I almost never see it unless I'm looking for it but wish it wasn't there. FWIW, I've been using the iloome for a few eels and it is my favorite screen protector to date.
Sent from my SCH-I535 using Tapatalk 4 Beta

No mine never did but it did end up getting really unresponsive after a couple weeks. I was so excited when I made it past 3 weeks lol I figured by that time it was good to go.
But it took a dump and now I'm on the hunt again.. Since then I've had a great one but I can't find where I've ordered it..
I dropped my phone and the sp cracked so I need to find out right away. It was advertised as .40mm thick but I don't remember the name and I can't find it now, have you heard of anything like that?
Sent from my SPH-L710 using xda app-developers app

Related

Martin Fields screen protector...

Doesn't somebody on here have one? Does it cover the entire screen or does it fall short? Seems like this might be the best one available right now...
masse1369 said:
Doesn't somebody on here have one? Does it cover the entire screen or does it fall short? Seems like this might be the best one available right now...
Click to expand...
Click to collapse
Sure just got yesterday. In fact it covers all of the glass portion of the screen. For reference there is no reduction in touch sensitivity with the protector in place.
While I think the cost is high, Martin Fields protectors have always been high quality. This is no exception.
Awesome news! Thanks for the reply!
Is this a thick, flexible protector like Zagg or PhantomSkinz? Also, have you noticed any change in proximity sensor sensitivity?
For reference, I have a PhantomSkinz currently, and when I'm in a dimly lit room and make/take a call, and pull the phone away from my face, it stays blacked out. I have to turn the light on to get it to wake up. I took the skin off, and it went back to normal.
Can you test this if you have the MF protector?
Also, can you please post pics of the screen protector in place? I, too, am wondering about the precision of the fitment. PhantomSkinz, Seidio, and others seem to have missed the mark and cut the protectors to short in width AND height.
Edit: Also looks like the include a piece for the camera cover on the back...? http://www.martinfields.com/US/prod...oogle_Nexus&modeln=Nexus One&prod_type=screen
uansari1 said:
Is this a thick, flexible protector like Zagg or PhantomSkinz? Also, have you noticed any change in proximity sensor sensitivity?
For reference, I have a PhantomSkinz currently, and when I'm in a dimly lit room and make/take a call, and pull the phone away from my face, it stays blacked out. I have to turn the light on to get it to wake up. I took the skin off, and it went back to normal.
Can you test this if you have the MF protector?
Also, can you please post pics of the screen protector in place? I, too, am wondering about the precision of the fitment. PhantomSkinz, Seidio, and others seem to have missed the mark and cut the protectors to short in width AND height.
Edit: Also looks like the include a piece for the camera cover on the back...?
Click to expand...
Click to collapse
I originally had a Skinomi protector and never really thought it bad, however I decided I'd try the Martin Fields one because I've never used a static protector.
Looks
I must say I'm thoroughly impressed by this protector! It fits perfectly; well almost perfectly, looking closely, you can still see the edge but it is almost negligible. If I had to gauge how big the space is... maybe about the thickness of a sheet of folder paper... if even that.
Scratching
The protector itself is what seems to be a hard plastic. I haven't scratched it yet (it claims to be HIGHLY scratch resistant) but it's still worrisome. I've done a fingernail test as of now and it has survived. It makes no indentation like the "self healing" skins so I'm guessing if it does get scratched, it stays scratched.
Application
The really cool thing I like most though is the static cling application. I managed to get dust on it before applying it X_X. Using scotch tape though, I was able to remove it with no problems! After about 30 minutes (I decided to be really OCD about the application) it was air bubble free and dust free. Oh, I also decided to try and running it under water to clean it but I found the tape a MUCH better way to clean it.
Removal
Also, be careful when removing the protector. It says to use tape and pull it off at corner. I tried using my fingernail on the camera protector and it kind of warped lol. No real problem though, just looks like an air bubble under it however it isn't over the lens so no problems taking pictures.
Clarity
As far as the proximity sensor goes, I thought it wasn't configured properly but after switching protectors, it works perfectly (so Skinomi = no good, Martin Fields = awesome). Same goes with the camera; it takes crystal clear photos.
Daily Use/Misc
The feel of this protector is very nice; I think due to the hard plastic material. It really does feel like nothing is there. Looks wise, it's glossy, reflects a clear image of me when looking at it, and is PERFECTLY transparent. If matte anti-glare is your thing, this isn't your screen protector. Good comparison is Macbook Pro anti-glare/glass; matte vs colors really popping off the screen.
Another issue I have with screen protectors is how well I can flick/scroll, this protector has my stamp of approval. As I said earlier, it feels very similar to glass and as such, scrolling is a breeze.
Smudging is also handled pretty nicely, much better than the "self healing" stuff. I find myself wiping the screen down with my shirt maybe once a day, if even that.
In Conclusion
So, sorry for the long post, but I tried to cover as many bases as possible. My last sentiments for this protector:
10/10
+
Easy application
Washable
Fits very well over screen, minimal non-coverage
Can remove dust from "sticky" side
Crystal Clear/Perfect proximity sensor
Feels Like there is nothing there
Highly scratch resistant? (personally, only did fingernail test so "?")
Somewhat smudge resistant
==
Camera protector
No anti-glare (your personal preference, move to + or -)
Pricy? (16.99 USD + 9.99 shipping)
-
Can be bent and will not fit properly afterwards
P.S. - Shipping was 10 dollars, Fed Ex overnight I think. It came within 2 days for sure though.
P.P.S. - I will post pictures when I find a better camera. I don't have one that zooms in close enough to see the edges and the glare kind of ruins the picture :\
Ugh, I want to put down for this sheild but the only thing holding me back is it's not whole body protection!
Thank you for your review! I doubt anyone will have a problem with as details are what matters
Also can you include some random pictures from the Nexus with the Martin Fields Protecter on the camera? I saw the one on their page but i'm always skeptical
It sucks ! had one and started pelling after a week, I keep my phone in my pocket.....now I have invisible shield and THAT one holds.
xavina said:
I originally had a Skinomi protector and never really thought it bad, however I decided I'd try the Martin Fields one because I've never used a static protector.
Looks
I must say I'm thoroughly impressed by this protector! It fits perfectly; well almost perfectly, looking closely, you can still see the edge but it is almost negligible. If I had to gauge how big the space is... maybe about the thickness of a sheet of folder paper... if even that.
Scratching
The protector itself is what seems to be a hard plastic. I haven't scratched it yet (it claims to be HIGHLY scratch resistant) but it's still worrisome. I've done a fingernail test as of now and it has survived. It makes no indentation like the "self healing" skins so I'm guessing if it does get scratched, it stays scratched.
Application
The really cool thing I like most though is the static cling application. I managed to get dust on it before applying it X_X. Using scotch tape though, I was able to remove it with no problems! After about 30 minutes (I decided to be really OCD about the application) it was air bubble free and dust free. Oh, I also decided to try and running it under water to clean it but I found the tape a MUCH better way to clean it.
Removal
Also, be careful when removing the protector. It says to use tape and pull it off at corner. I tried using my fingernail on the camera protector and it kind of warped lol. No real problem though, just looks like an air bubble under it however it isn't over the lens so no problems taking pictures.
Clarity
As far as the proximity sensor goes, I thought it wasn't configured properly but after switching protectors, it works perfectly (so Skinomi = no good, Martin Fields = awesome). Same goes with the camera; it takes crystal clear photos.
Daily Use/Misc
The feel of this protector is very nice; I think due to the hard plastic material. It really does feel like nothing is there. Looks wise, it's glossy, reflects a clear image of me when looking at it, and is PERFECTLY transparent. If matte anti-glare is your thing, this isn't your screen protector. Good comparison is Macbook Pro anti-glare/glass; matte vs colors really popping off the screen.
Another issue I have with screen protectors is how well I can flick/scroll, this protector has my stamp of approval. As I said earlier, it feels very similar to glass and as such, scrolling is a breeze.
Smudging is also handled pretty nicely, much better than the "self healing" stuff. I find myself wiping the screen down with my shirt maybe once a day, if even that.
In Conclusion
So, sorry for the long post, but I tried to cover as many bases as possible. My last sentiments for this protector:
10/10
+
Easy application
Washable
Fits very well over screen, minimal non-coverage
Can remove dust from "sticky" side
Crystal Clear/Perfect proximity sensor
Feels Like there is nothing there
Highly scratch resistant? (personally, only did fingernail test so "?")
Somewhat smudge resistant
==
Camera protector
No anti-glare (your personal preference, move to + or -)
Pricy? (16.99 USD + 9.99 shipping)
-
Can be bent and will not fit properly afterwards
P.S. - Shipping was 10 dollars, Fed Ex overnight I think. It came within 2 days for sure though.
P.P.S. - I will post pictures when I find a better camera. I don't have one that zooms in close enough to see the edges and the glare kind of ruins the picture :\
Click to expand...
Click to collapse
Thanks so much for your thorough review. Two things though... first, can you please take a pic of the screen for us, especially showing how the fitment is? I believe you when you say it's just barely short, but am just curious. Second, I'm glad to know I'm not the only one who noticed a change in the proximity sensor with these thicker skins.
I'll almost certainly be ordering this product it looks like. One more thing... does it have a guarantee or anything?
Edit: Found this review with installation tips... seems to be just like a Seidio screen protector.
http://the-gadgeteer.com/2004/01/05/martin_fields_overlay_plus_pda_screen_protector_review_/
I've attached a few pictures of the phone and a few taken from the Nexus One
Screen protector
I tried to get as close as possible to the screen to show the edges (Don't mind the Skinomi skin lol).
The one of the camera protector seems clear, but there is one section that is discolored to the rest, that'll be the place I bent lol (bottom half when looking at the picture I took).
Pictures taken from the Phone
There are 2 pictures taken with the phone; one normal and one using the zoom feature.
The picture of the plants are closer, in mid/low light.
The picture of the mountain is further away and in bright light. It's not exactly clear because it's rainy/misty today, sorry for that one.
The last pair is of a magazine in little-no light using the flash as the only source of light.
Warranty
Regarding the warranty, I didn't see mention of anything so I can't really say. If I find anything, I'll be sure to post it.
Thickness
To me, it seems slimmer than the Skinomi Skin because I can feel it almost flush to the metal but it might be my imagination.
I can only upload 8 at a time, so I'll post the others in another post.
These are the remaining photos I took from the phone.
Wow... the fitment looks perfect man. Thanks very much for the pics. Still waiting to hear from Seidio, but this is the front runner. I'll order a new one this week. By the way, I'm jealous that you live near mountains.
Haha, yeah, living in Hawaii has its perks. Wish I could have taken more pictures but I just figured I'd get something posted asap.
If anyone would like to see any specific pictures/angles, I'd be happy to oblige. Like I said though, the camera I have isn't exactly great so quality is kind of lacking.
I'll post again later though seeing how someone had an issue with the protector peeling. I also put my phone into my pocket, so we'll see if it collects lint, peels, etc. So far, my Skinomi seems to be acting like a lint magnet so that may skew results lol.
One last thing of note, I've been hearing word that Martin Fields uses a mild adhesive. With this protector, I guess it's possible that a really mild adhesive is used but I know for sure it's static; depending on which side I'd place a strip of tape close to it, it would actually pull or push the tape in a certain direction. It didn't really feel sticky but I could definitely tell which side needed to be placed on screen; it wasn't smooth on one side.
I have an Martin Fields protector installed on my N1 as well. I'm pleased with it.
I agree with the review here, but I'd like to add that these things do get scratched quite easily. I have one on my G1 and it looks like sh*t after 6 months. It's scuffed and scratched like crazy. Since the MF protectors are not cheap, it's annoying to replace them, but they do their job quite well. Note that I keep my phone in my pocket, often rubbing against keys and coins.
I've had a MF protector on my digital camera for six months and it still looks new (and invisible.)
I always buy two-packs but I wish I could get 10-packs.
Hopefully they'll be available from vendors in the US soon, at lower prices and with cheaper shipping.
tehkseven's review of martin fields vs dcmugen (generic)
Bicster_ said:
I have an Martin Fields protector installed on my N1 as well. I'm pleased with it.
I agree with the review here, but I'd like to add that these things do get scratched quite easily. I have one on my G1 and it looks like sh*t after 6 months. It's scuffed and scratched like crazy. Since the MF protectors are not cheap, it's annoying to replace them, but they do their job quite well. Note that I keep my phone in my pocket, often rubbing against keys and coins.
I've had a MF protector on my digital camera for six months and it still looks new (and invisible.)
I always buy two-packs but I wish I could get 10-packs.
Hopefully they'll be available from vendors in the US soon, at lower prices and with cheaper shipping.
Click to expand...
Click to collapse
This sounds to be the exact same as dcmugen's screen protectors. It confirms the findings of tehkseven's reviews.
I really dont understand why anyone would pay five to ten times as much as one would need to... you all need to try out dcmugen's products because I really haven't found a seller with better quality to price ratio. Search 'epikcase' on eBay.
laughter95 said:
This sounds to be the exact same as dcmugen's screen protectors. It confirms the findings of tehkseven's reviews.
I really dont understand why anyone would pay five to ten times as much as one would need to... you all need to try out dcmugen's products because I really haven't found a seller with better quality to price ratio. Search 'epikcase' on eBay.
Click to expand...
Click to collapse
Link to dcmugen?
uansari1 said:
Link to dcmugen?
Click to expand...
Click to collapse
His ebay seller ID is dcmugen88
Thanks, will order some dcmugen88 product. The material sounds the same. His 5 pack is cheap! If it works ok I'll have a new protector every month instead of every year, lol.
I too just ordered (2) of the Anti-Glare ones from dcmugen for $4.49 shipped.
I will report back once I receive it and will give a review.
Just a follow up review, now that I've had the protector on for a little while.
I usually keep my phone in my shirt pocket but I decided to mix it up and
Throw it into my pants pocket (with keys) for the purpose of this review.
Looks
Still very impressed by the looks of the protector. Nothing has changed that
I can tell; no peeling effect, no lint collection (again, could be due to skin
protector lint collection lol).
Scratching
Haha, as mentioned by another reader, this protector does indeed scratch.
Now, here's the funny thing: It didn't scratch due to my keys, but rather my
cleaning cloth.
Some cleaning cloths burn the edges and while I'm usually
careful with those, I figured if this thing has been taking my keys, it should
be able to hold out; not the case.
It's a very deep scratch, so much so that I can feel it under my finger.
The cool thing is though, I cannot see the scratch under normal circumstances.
I can't feel it under normal use either.
Seriously though, I can't even see the scratch under daily use.
Only by flashing direct light can I see the scratch, and by moving my finger
slowly over it can I feel it.
Note: scratch is maybe 1/8th of an inch long.
Clarity
Screen still displays beautifully and pictures are still awesome.
Cleanliness
Still remains pretty clean throughout a few days, only wiping it down every
two or three days. Pretty darn good I guess.
Conclusion
While I'm sort of sick that it got scratched, it's so unnoticable that I haven't
felt the need to replace it. Don't know how long it will last, but if ever
I decide to replace it, I'll post again and give the reasons why.
I'm still quite pleased with this protector and I don't think I'll ever use
anything besides these static cling protectors (be it Martin Fields or another).
hey Xavina. Are you near kea'ahala pl? looks like the pictures are taken from my old house almost haha.
Nevermind. But the bkgrnd is close.
[/IMG]
My old driveway. Anyways off topic ... carry on.

Realook Screen Protection (5 stars)

Just ordered and installed Realook screen protectors and I couldn't be more pleased. I have used other screen protection from Zagg and Sprint and I did not like them nearly as much. I will do my best to describe what its like but you really need to see it in person.
Feel:
The material is a firm plastic that when applied feels nearly the same as the bare glass. I did not like Zagg because it felt soft and textured like an orange peel. This stuff is 95% the same feel as glass and I waited 20 days before installing it, so I have a good level of comparison.
Look:
Clear as glass. I have not yet tested what effects it has on glare, but there is no noticeable difference indoors. Also it is ready to go 30 seconds after installing. All you need to do is push out the large air bubbles. It doesn't take 1 or 2 days to settle like some other protectors. Other people in this thread reported a rainbow reflection in the sun light when the screen is off.
Installation:
Before I started I ran the shower on hot to fill the bathroom with some steam to settle the dust. There is nothing that will bother me more than a single spec of dust under a screen protector, I will obsess about it to no end. Due to my rough and dry hands I am a dust machine and I have never failed to get at least 1 piece of dust under every screen protector I have installed. This time was no different. I mis-aligned the screen on installation and had to peel it back, when I did 1 spec of dust planted itself. I used a piece of tape they include in the box to peel back the screen, and another piece of tape to pull off the dust and it was clean. I am sooo happy about this point. Other protectors I used with adhesive would grab onto dust and never let go. Since it does not use adhesive so it is easy to put on and peel back off if you made a mistake.
The Bad:
Back button less responsive. It will still work on the first touch every time, but you do need to touch a little harder than before.
Box Includes:
2 screen protectors.
1 Wet wipe
1 Plastic card to push out air
2 pieces of tape(if needed)
1 microfiber cloth(to clean the screen before and after installation)
Sorry for the slightly blurry photos. Taken with another Epic4G and it doesn't like to focus on close ups.
$11 at Amazon
does it make the screen fuzy?
Perfectly clear. I wish I had a better camera to show it.
edit: I just discovered macro mode in the camera settings. I will post more photos soon.
Returned the Sprint speckled ones that was degrading display quality to the local Sprint store and am awaiting delivering of Realook for both Samsung Epic and Panasonic GF1 camera. Realook sounds like the best option and value out right now for the Epic until Steinheil Ultra Oleophobic is made available for comparison.
a holes wouldnt take mine back
+1 for Realook! Best screen protector i have used. Same experience as Pops.
I also went to Realook after Skinomi. Love Realook! Slick, smooth feel like the original glass. Relatively easy to apply. No screen degradation. Wonderful, all around.
does no opening for cam hinder it?
Anyone want to trade their spare ReaLook for a pair of PhantomSkinz screens?
I also have the Realook on my phone and it's absolutely great.
But since no one actually pointed out the cons, I'll try to list a few:
- It's not a PERFECT fit so you'll find gaps on all four sides. I'm concerned that dust may eventually get stuck in those gaps.
- I don't exactly remember how the bare screen was now that I have the Realook on, but I think the Realook makes the screen a little more "reflective".
- Under artificial lights (esp. fluorescents), you'll notice the interference patterns like straight rainbows. Hard to explain but people with screen protectors on any phone may have seen them before.
- The capacitive buttons become less responsive meaning that you'll have to push them harder.
churro7 said:
does no opening for cam hinder it?
Click to expand...
Click to collapse
Doesn't seem to. It is pretty optically clear. With 640x480, you probably wouldn't notice if there was any difference anyway.
tonysohn said:
I also have the Realook on my phone and it's absolutely great.
But since no one actually pointed out the cons, I'll try to list a few:
- It's not a PERFECT fit so you'll find gaps on all four sides. I'm concerned that dust may eventually get stuck in those gaps.
- I don't exactly remember how the bare screen was now that I have the Realook on, but I think the Realook makes the screen a little more "reflective".
- Under artificial lights (esp. fluorescents), you'll notice the interference patterns like straight rainbows. Hard to explain but people with screen protectors on any phone may have seen them before.
- The capacitive buttons become less responsive meaning that you'll have to push them harder.
Click to expand...
Click to collapse
I agree with all of those. I only have a gap on the bottom, though. Left and right seem to be exact.
I see the rainbow effect but it doesn't seem to cause any problem for me. I really don't notice it unless the display is off.
I do have the less responsive buttons, especially the back button. I'm wondering if I could slice off the bottom centimeter of the protector smoothly enough to make it worth trying.
Jason
I like it, but...
It's harder to clean than the Gorilla Glass of the Epic. It also has more friction than the Gorilla Glass. Your fingers won't glide across it as effortlessly. Finally, it has slightly rough edges that you can feel.
I should sell my unused RL screen for 5 bucks or something. Do people typically do that with their unused protectors?
Just ordered mine from amazon after reading this thread, i hope it is as good as you say it is. I have used Zagg a few times before, and Skinomi twice, and BodyGuardz on my nexus one. my favorite was BodyGuardz, but for 10 bucks i think it is worth trying this one. ill give feedback when it gets here in a few days.
If anyone wants another (good) opinion, here's a review from ppcgeeks.
I posted my review on realook a while back on ppcgeeks. Best protector ever IMO. http://forum.ppcgeeks.com/sprint-ep...king-screen-protector-tips-4.html#post1942030
Post #34
Sent from my SPH-D700 using XDA App
i use skinomi very nice and slick
I might give real look another chance but I used one on my touch pro 2 for a few months it looks and feels absolutely great however when i took it off today there was definitely some residue left behind. Swiping on the screen was not as smooth as when i first bought it. I just got my epic today and blew the installation of the clarivue protector. I don't think reallook has no adhesive, I think it has some adhesive so before I give them a try again i am gonna try boxwave and clarivue 1 more time.
the best protector IMO
I agree that the Realook protectors are the best. I installed mine a week ago and i'm really liking it. The look is awesome, the fit is perfect and it doesn't really have much more drag then the naked glass. The one issue is the fingerprints and oil residue. I can tell you that the phone is much more difficult to keep clean with the Realook, but that's not big of a deal. I used to just use my shirt or pants to wipe the phone clean, and now i have to use a microfiber. Even then it takes about two to three times the effort to get the oils off. I would still recommend this product.
I just got my real look in today (ordered thursday night) and i have a 10% off coupon code if anyone plans on getting one via amazon before the 30th.. pm me if anyone wants the code...
ordered from same link the OP posted $11 shipped so coupon will drop a buck off.. nothing much but I figured id throw it up here
UPDATE:the coupon is spoken for.
Ok i need to first say Pops_G you rock for informing me about this screen protector, and your method with the shower was genius, wish i did that when i installed all the other screen protectors in my past. On to my experience...
I just got the Realook Screen protector today, and i previously stated in a prior reply, i have tried zagg invisible shields, BodyGuardz ( OLD FAVORITE ) and Skinomi. The application of the Realook Screen protector was hands down, the Easiest ever, i didn't think it could go that fast. And in terms of how it looks and feels, I could not believe my eyes. You seriously cannot tell when looking at the screen that there is a protector on there. Zagg, Bodyguardz, Skinomi all have, in some regard, no matter how small, a orange peel effect, where there are small ripples in the screen from the water that is used in the installation process, they go away in time, but it is slightly noticeable. They also feel rubbery and take away from the graceful movements of the screen. Plus you have to turn off the phone, pull batter, use a water/soap spray mixture, worry about air bubbles, let it dry 24 to 48 hours, and wake a week plus for the solvent to evaporate. I had this Realook applied in 5 minutes, it would of been less, but i was super anal about making sure not a spec of dust was on the screen. lol.
Now this is just my first impression, after a hour or so of use. It is plastic which makes it feel very much like the original screen, although im sure that will allow the screen protector to scratch, unlike zagg, bodyguardz, and skinomis rubber film where they wont, unless you really try. And also it does show the finger oils more than the actual glass does. I am ok with this becasue that is the purpose of the protector, to get scratched and not the actual screen, Plus i have a backup because 2 came in the pack. GREAT DEAL. Second, i only see this screen protector working for phones that have a completely flat screen and have some sort of small lip around the phone. For Example: I dont think it would work best on a palm pre, which has no lip, and then it could be more easily peeled off down the line. But for the Epic 4g... Seriously im in love.
Thanks again Pops_G

Case-mate barely there - - mini review

I just received my Case-mate barely there case today from play.com & thought I'd give a mini review ago.
It comes in a smartly packaged box, upon opening the box you have in your hand a moulded abs plastic shell & a sealed packet containing a screen protector, micro fibre cloth & a piece of soft card.
The shell is easy enough to put on, it's just a simple push to fit design that works really well.
The actual fit of the Case-Mate barely there is superb with the power & volume buttons being easy to access as are the mini usb port & 3.5mm socket while also giving the camera & speaker unobstructed access.
I didn't fit the screen protector, well seeing as Samsung used gorilla glass & the fact that a screen protector isn't going to do much good if you drop it face down (I've seen a few on here with cracked screens) & that someone can do this to one with no ill effect then I see no need.
The Case-Mate barely there itself was purchased to improve the grip of the phone which as we all know is a little slippery & protect the rear cover from getting scratched & knocked, well the Case-Mate barely there does improve my hold on the Galaxy S but not like I was hoping it would .
The case wraps around the rear of the phone following the Galaxy S contours like a second skin, I can see this case giving great protection to the corners & rear of the phone.
So in all a well made case that fit's superbly, gives easy access to the various button & connectors whilst saving corners & back cover from scratching & knocks. And like it's name implies you'll barely notice it's on the phone.
My only gripe is it feels a little to silky for my liking, I was hoping it would have a rubberised back for improved grip something a little like a silicon case feel.
nice review. i just ordered mine, so it's gonna be a long wait before i get it.
Thanks for the review. I also purchased mine, it was shipped today, can't wait to get it.
I know what you mean about the feel of the case. I have one on my ipod touch but only because I couldn't get a Flexishield case for it. I have a Flexishield on my Desire and am about to get one for the SGS. For me it has a better feel to it and fees less slippery.
Great review, I ordered mine about 2 weeks ago. Hopefully it comes in soon
Anyone has pictures of the silver one ? I ordrered it but it won't be there before three days or so.
Very nice case
jonni3 said:
I didn't fit the screen protector, well seeing as Samsung used gorilla glass & the fact that a screen protector isn't going to do much good if you drop it face down (I've seen a few on here with cracked screens) & that someone can do this to one with no ill effect then I see no need.
Click to expand...
Click to collapse
Seriously that keything doesn't mean crap. You think it's the BIG things in your pockets that do the scratches? It's not. Take any sandpaper and swipe ONE time over the glass of the SGS and you'll have tons of scratches, you don't even have to press very hard. It's generally not your keys, a screw or a screwdriver in your pocket that cause scratches, it's tiny grit that does. Every time you wipe the screen you risk scratching it if there's the wrong kind of dirt on either the screen or the cloth you use. That's why people can be however careful and still get scratches, just read around, you'll see. Everyone doesn't bull**** you when they tell you they take good care of their phone.
Ok recieve my silver casemate, some low res pictures here. I'll take very good ones later when I get back a hold of my APN charger.
http://picasaweb.google.com/114505993397088135290/CasemateBarelyThereSilver#5524273441974319986
Anyway just imagine OP's picture with that kind of grey/black/silver reflections.
It looks kinda glossy, how is the feel of the case?
I've noticed with mine it's started to feel a bit more rubberized now it's been handled.
@ mickeko
About the screen protector you have a valid point & I am now going to have to rethink not having one.
Sent from my GT-I9000 using XDA App
Yea the screen protector looks ugly ^^ it breaks the harmony of the phone in the area around the front facing camera, you can clearly see the protector cutout that is quite ugly. You do not have this problem on silicon cases as they often cover the side cutout. However I would never go without a screen protector without a pouch, the dust level of my pockets are way too random to take the risk of the godamn dust scratches (the silver case also has that little problem, but they are only visible if you search for them micro scratches of doom).
The case feels good, no creaks.
It's not very glossy, or at least I won't call that glossy, in fact it acts like a mirror if you face it at 90° incidence. But if you tilt it even by 5/10 degrees in mid light conditions, it takes a very nice and not glossy dark/grey silver tint similar to the one of the original chrome bezel of the SGS. They both blend very very well. It is really a BARELY THERE experience. very thin, very stylish. Nearly to the level of a naked iphone 4.
Sounds pretty good & seems like your more than happy with it
These case's really complement the phones shape & add very little to the overall dimensions, know what you mean about the screen protector it's not really that attractive, I'm looking for one that covers the entire screen from edge to edge so it doesn't notice.
Looking at your pic's on the pc & it does seem to have that smoked chrome effect like the bezel on the SGS
Indeed but the SGS bezel is a little more greenish/blueish in tint but it is barely noticable (you had to get me to check it closely in white light to notice it), both have the same reflection behaviour however which is why it blends very nicely.
I also notice a very faint rainbowish halo (probably there from transparent coating material used over the silver layer) in the backplate reflections, well, it's kind of cool actually.
My barely there case just came in, I must say very nice case.
My girlfriend has a cheap ebay one, and this is definitely worth the price.
Good job case-mate
epicfailguy2 said:
Anyone has pictures of the silver one ? I ordrered it but it won't be there before three days or so.
Click to expand...
Click to collapse
Just a heads up. I had a metallic 'silver' case-mate barely there on my Desire and it murdered the 3G signal strength. Swapped it for the plain black and it was fine. Dunno if you have that issue with the SGS.
Signal is the same, didn't notice any change 4bars in town.
Just picked mine up today and couldn't be happier with it. Slides in and out of my pocket fairly easily and adds some structural support to the phone which you could argue is a little lacking.
So far I'm very happy with it; I was quite skeptical as I was a long time iPhone (indestructible 2G model) owner and have never used a case.
Haven't had a chance to add the screen protector.
Told you I was going to make it up for the crap ass webcam pictures
http://il.youtube.com/watch?v=OHLglrlRsrw
Where did you guys purchase this at?
EarlZ said:
Where did you guys purchase this at?
Click to expand...
Click to collapse
Asking about Barely there case?
http://shop.ebay.com/?_from=R40&_tr...rely+there+galaxy+s&_sacat=See-All-Categories
Although I see there are no black ones or metallic at the moment, only pink
Just got mine two days ago and must say this is the perfect case for my SGS, could be a little less slippery, but still definitely worth it's money.

Screen Protector vs. No Screen Protector

When I first got my first A2, the rep at best buy put on the screen protector before I left the store... (keep in mind that this is my first "smart" phone of any kind, let alone android) ..so, I had never really known it without a screen guard/shield/protector until I got my 2nd A2 (and, subsequently 3rd).
The 2nd A2 I knew was temporary because of a dead pixel in the center of the screen (and other signs of refurbishment), so I never bothered putting on a screen guard. And with my 3rd A2 and I still haven't put one on - I have a brand new Zagg Invisible Shield just laying there, but it been over 2 months... And, I gotta say I like it much better.
Now this can all depend on the shield you use, but without a shield, the touch seems more responsive, the screen crisper, it's easier to clean...
I have a nice case that is raised a bit on the topside edges to help protect, and I never put anything else in the same pocket as my phone...
I know it's risky, but don't we have Corning Gorilla Glass already? Can you scratch that? And I do eventually have a contract upgrade coming anyway..
Thoughts? Preferences? Keep your minds out of the gutters..
I had a screen protector when I first bought the phone, and I got annoyed with it. The screen was dimmer, but the screen was less prone to finger prints. I still have it as it's reusable, but I left it in the car in the Florida heat, so the layers of it are peeling off. My screen also jumps and stutters when it's plugged in and fully charged to 100%. I should probably buy another one to preserve the screen seeing as how I don't upgrade until May.
alteredlikeness said:
I have a nice case that is raised a bit on the topside edges to help protect, and I never put anything else in the same pocket as my phone...
I know it's risky, but don't we have Corning Gorilla Glass already? Can you scratch that? And I do eventually have a contract upgrade coming anyway..
Thoughts? Preferences? Keep your minds out of the gutters..
Click to expand...
Click to collapse
I have to agree with you. I personally was super paranoid about scratching my screen and so I put shields from various companies on my screen to help protect it. The screen guard got dirty and so I took it off, and I love not having the screen guard on because of the reasons you stated.
I am pretty sure our phone comes with gorilla glass, but it isn't invincible. I have a scratch on my screen but it isn't noticeable when using the phone just when the screen is off. But I guess just keep it safe in a pocket that you don't have anything in and don't have sand chillin' in your pocket.
I've had this phone for almost a year and I didn't start using a screen protector until a couple of months ago. For some reason the screen on this phone scratches easier than my Captivate. I keep them in my pocket but the Atrix 2 has accumulated quite a few small scratches near the bottom of the screen and around the buttons.
I would rather not use one, but I would like this phone to last a while, even as a back up. I've tried several protectors and I've settled on the Great Shield clear protectors. You can get 3 for $7.99 on Amazon and they install easy and are pretty durable. You can also take them off, clean them and reinstall them without losing any adhesive properties.
i had a anti-glare screen guard which i used for 6months and one day due to some expt i was doing on my phone with skins it got off. havent put one back, have just one tiny 1mm scratch which is visible only if you look at it tangentially. have to say the colors look more vibrant and the touch is more responsive (might be due to OC and cm10).
Anyways, i have a case with raised edges, same as altered described, and i take extra care of my phone now. but since im keeping this phone for another year n a half atleast, will definitely get a new screen guard, (maybe one without the anti-glare effect, if i find one) cause gorilla glass Is prone to scratches.
Real men dont use protection...
Stay classy.
Initially I didnt use any "protection" LOL, but had two tiny scratches on the screen. Yes, it does catch scratches easily compared my previous devices, I tried these 1. Amzer anti-glare, will be good for 1/2 months then you will hate it, 2. Amzer Mirror Screenguard, gave me migraine (literally!) 3. Right now having Xtremeguard on it and like it.
There are basically two reasons why I get the screen protectors, to protect the screen obviously and the screen without protector is too slick for my liking, that's just my opinion.
My first A2 went from release day to this September when it bricked and was replaced. In that time frame i had only acquired 2 micro scratches never had a screen protector on it nor do I have one on my replacement. Also the glass is coated it's that coating that is scratch resistant. Watch this
http://www.xda-developers.com/xda-t...ass-drops-tests-composition-xda-developer-tv/
I have a serious thing against screen protectors and cases. I prefer my phone to be naked.
Screen protectors, no matter what you people say, make the screen worse in some way. The display is made to work well alone. They just all suck, and if you ever want it off, in a lot of cases, god help you, especially with self adhesive ones. They do however help prevent scratches, because you will just scratch the screen protector instead of the screen, so if that is important, you may want to consider it.
Cases, now this is just opinion. There is no doubt that they help prevent your phone from breaking, I just absolutely hate them. I don't like to bulk up my phone and make it ugly.
All that said, I take very good care of my phone. I have never dropped it, and I doubt I will, so there is no need for a case if you are careful.
P.S. yeah, gorilla glass is a joke, it still scratches. Just has a slightly higher hardness, and wont break as easy, but coins or keys will still do their job the same.
souljaboy said:
Real men dont use protection...
Stay classy.
Click to expand...
Click to collapse
Priceless!
Sent from my MB865 using xda app-developers app
First up I feel like a dunce picking up that Skinomi worth 7 green skins sucks bad bad. Totally not recommended.
Gorilla glass is in iteration 2 of implementation so that speaks for itself about our ver 1. Plus there is no Oleophobic coating on our device. I invested a massive 20 + $ greenbacks on Otterbox and though no complaints with usability it sure makes the phone bulky and downright fugly. None of the screen guards last more than three months until you need to put a new one.
In India, given the extreme dusty atmosphere in cities, a small two hour ride in public transport coats the phone with dust. Otterbox covers the all ports with covers so that's good. In my opinion just a slip in/out elegant pouch is the best option. Screenguard I reckon is required. Wish 3M made the privacy screen protector for Atrix 2.

[Q] Two Spigen Neo Hybrid Case questions

http://forum.xda-developers.com/showthread.php?t=2267412
I want that case but I have 2 concerns!
1. Should I go without a screen protector?
Comment: I don't like screen protectors cause they ALWAYS have air bubbles then that's money down the drain cause they annoy me.
2. I heard the charger port opening is small and breaks easily, also spigen is bad about replacing the border. Opinion/experience?
Comment: I understand the charger port being small for it's "slim" design but I want everybody's opinions on these two issues! Any criticism is constructive in my book!
My frame broke in about 3 weeks with CAREFUL usage and barely taking the case off. Just chucked the case and frame and went naked for now with a carbon fiber skin on the back
Sent from my SGH-M919 using xda app-developers app
My Frame was broken too.
Dont buy the neo hybrid!
Sent from my GT-I9505 using xda app-developers app
My neo hybrid Chinese knock off broke too, but I have the original for about 3 months and I'm well happy.
about the screen protector, the cheap ones indeed leave air bubbles and are crap, but I've been using the better ones on my Galaxy Nexus and now on S4 and they are really good and they don't leave greasy finger stains on the screen as much as when you don't have one on.
try this one for starters... not expensive but really good, I'm using one right now
http://goo.gl/7cCibB
I've had the Spigen Neo Hybrid since August and I have no regrets, a little chip in the plastic frame from what be an otherwise very unfortunate drop. Sorry to hear others are having issues with theirs, and I think they updated the design to make it less prone to breaking.
Broken Frame
Same problem here, broken frame after 1 month
Drake9897 said:
http://forum.xda-developers.com/showthread.php?t=2267412
I want that case but I have 2 concerns!
1. Should I go without a screen protector?
Comment: I don't like screen protectors cause they ALWAYS have air bubbles then that's money down the drain cause they annoy me.
2. I heard the charger port opening is small and breaks easily, also spigen is bad about replacing the border. Opinion/experience?
Comment: I understand the charger port being small for it's "slim" design but I want everybody's opinions on these two issues! Any criticism is constructive in my book!
Click to expand...
Click to collapse
I hate screen protectors too but they are absolutely necessary to preserve the longevity of the phone. I bought the tempered glass screen protector from Spigen Glas.TR SLIM. If it wasn't for the rounded lip around the protector you'd never think it wasn't the actual glass of the touch screen. It was the best 35 dollars I ever spent.
I have had the original Neo sine the phone came out and it is still in greta condition. I would definitely get a screen protector. I would recommend the Spigen crystal series, it is hardly even noticeable.
DO get a screen protector. I know this phone has a tough glass front, but better to be safe than sorry right? I have a Spigen crystal clears which I picked up for like $4 on amazon (it is a genuine product) and its a great screen protector.
DON'T get the hybrid, my frame broke near the USB port, the back warped and pulled away from the phone, Spigen only has a 90 warranty and ONLY if you buy it from them.
Furies said:
I hate screen protectors too but they are absolutely necessary to preserve the longevity of the phone. I bought the tempered glass screen protector from Spigen Glas.TR SLIM. If it wasn't for the rounded lip around the protector you'd never think it wasn't the actual glass of the touch screen. It was the best 35 dollars I ever spent.
Click to expand...
Click to collapse
Screen protectors are not ABSOLUTELY neccessary. It really depends on how you care for the phone.
I've never used screen protectors. I keep my phone in my front pockey, glass facing in, and the only other thing I ever keep in that pocket is money (which is made of cloth, so it's not going to hurt the phone)
I've never had a single scratch.
If I were to drop the phone or slam it into something, a screen protector isn't going to help anyway.
Now if you keep your phone in a pocket with keys, or a purse with everything else that goes into a purse, or anything like that, that's a different story. But even then a screen protector isn't going to stop your phone from getting messed up eventually. It's goign to wear out much quicker than projected.
I have the ultra thin glass screen protector -> http://www.spigen.com/brands/samsun...-glas-t-nano-slim-premium-tempered-glass.html
Cases still fit and it looks great and feels better than that.
Quick question guys, if the hybrid breaks easy recommend another case that looks just as good if you don't mind!
another question, cant he tempered glass get air bubbles and can you take it off, also do all the sensors work flawlessly?
1.) Currently using a tempered glass screen protector on mine (Which is alil bit thicker) makes the "Lip protection" non-existent. So I'd get some sort of screen protector because that lip is pretty minimal.
2.) Had that concern for myself before I bought mine, truth is..if you use the OEM Sammy cable you'd be fine. Also to put on and off the case correctly lol.
BTW: Had mine since July and its still going other than a few lil chips on the frame..
---------- Post added at 07:53 AM ---------- Previous post was at 07:47 AM ----------
Drake9897 said:
Quick question guys, if the hybrid breaks easy recommend another case that looks just as good if you don't mind!
another question, cant he tempered glass get air bubbles and can you take it off, also do all the sensors work flawlessly?
Click to expand...
Click to collapse
Ultra Thin Air for like 10$ or the Slim Armor (Be careful with the white version though, mine is starting to fade in to yellow in certain areas )
Any screen protector / Tempered glass can get air bubbles if theres dust..But for some its normal to have bubbles as they go away within like 12hours. Tempered glass are removable annnnnd all the sensors work great with mine.
I've been using the Neo Hybrid for about two months now. It fits good and snug and shows no signs of wear. The plastic bumper is a little thin around the charging port but treat it well and you'll be OK. Plus, the button extenders on the sides feel really good and "clicky", instead of mushy as some of the rubber ones do.
As far as screen protection goes, I've always used the Zagg Invisible Shield but when I bought the S4 the sales guy threw in the Bulletproof protector for free. He even applied it for me, and I wanted to shake his hand afterward. Perfect positioning, no bubbles (I mean absolutely none), and he did it in about three tenths of a second.
Sent from my SGH-M919 using XDA Premium 4 mobile app
I've never used a screen protector on ANY of my phones, never had an issue, so I don't believe in them. as far as the Neo Hybrid breaking near the charger port, I don't get how so many people break them, I remove my case once a day to switch batteries and I've never had an issue, maybe take a little care when removing the case
sent from my Galaxy S4 using Tapatalk 4
I use a glass screen protector. Maintains the glassy feel without sacrificing screen security. The neo hybrid is overhyped in my opinion. I bought it and the main thing that I did not like is how easy it was to press the power button. Without the case, the power button rarely got pressed in my pocket, but with the case on, any light tap on would push it and turn my screen on.

Categories

Resources