Related
Hi,Friends.I can only speak a little English, only with the help of Google Translate.
This ROM is Chinese official public beta MIUI V4 for SAGA.
First of all, state that I am not a developer.
How to flash ROM,please refer to the brush into the way of the other ROM.
------------------------------------------------------------------------
ROM Language:English or Chinese.
------------------------------------------------------------------------
Fully-Functional :
Battery history
Bluetooth & WiFi
Bluetooth Headset / A2DP
Google Apps
GPS
Headset / Headphones
HW Acceleration
Microphone when using apps
Mobile Data
Mobile Data usage logging
Sensors (Proximity, Light, Compass, Rotation)
Touchscreen
USB Mass Storage
USB Tethering
WiFi tethering
Camera
Camcorder
------------------------------------------------------------------------
Please note: WIPE
Must WIPE /data and /cache
Must WIPE /system
------------------------------------------------------------------------
download:http://d-h.st/z3P
downloading.......
Why this Rom is 237.81 Mb and the official one from china is 235 Mb??? http://www.miui.com/development.html (use google translator)
Its downloading so slowly , do you have same problem ?
Sent from my DesireS using xda premium
cript0n said:
Why this Rom is 237.81 Mb and the official one from china is 235 Mb??? http://www.miui.com/development.html (use google translator)
Click to expand...
Click to collapse
the official one has no kernel included. he might have put the kernel inside
45 minutes for me -.- ...but it's really official so I'm excited !!
BTW: Where does kernel 3 come from? Build by them? Official ist not out yet isn't it?
from 20-36kb/s sooooo slowly!! still downloading... and download failed 3 times!
cript0n said:
Why this Rom is 237.81 Mb and the official one from china is 235 Mb??? http://www.miui.com/development.html (use google translator)
Click to expand...
Click to collapse
I added in the official version of the kernel, or can not boot
Wody05 said:
45 minutes for me -.- ...but it's really official so I'm excited !!
BTW: Where does kernel 3 come from? Build by them? Official ist not out yet isn't it?
Click to expand...
Click to collapse
Using the HTC China OTA kernel.
cript0n said:
from 20-36kb/s sooooo slowly!! still downloading... and download failed 3 times!
Click to expand...
Click to collapse
I'm sorry, I do not know why your side of the speed is so slow.
kyeeliu said:
I'm sorry, I do not know why your side of the speed is so slow.
Click to expand...
Click to collapse
Finnaly i got it!! :laugh: Let's taste it!
Thanks
cript0n said:
Finnaly i got it!! :laugh: Let's taste it!
Thanks
Click to expand...
Click to collapse
Rom works perfectly BUT superuser is not working for me!! I tried to install some other mod from recovery (superuser.zip) but still not working..
Also when you install any .APK allways shows FC of this app.. (see attachment)
I did Full wipe and I tried it twice... so.. please solutionn!!!
:good:Thanks! :good:
Tutorial if you DONT have 4.0 / Updated HBOOT
Update your recovery.
Check HBOOT version is 1.7 or below
Boot to recovery.
Flash stock ZIP file which is included in ZIP file.
Tutorial if you DONT have 4.0 / Updated HBOOT
You need S-OFF and HBOOT 7.0. If you have HBOOT 6.8 follow steps 2
- Rename the file PG88IMG_hboot7.0.zip to PG88IMG.zip. Follow Steps (4-7)
- If you have HBOOT 7.0 and S-OFF. Flash this PG88IMG_SAGA_ICS.zip.
- Place on root of SD Card.
- Turn phone off.
- Boot with Vol Down and Power to enter Fastboot (or adb reboot bootloader)
- Press vol key. That will start update of HBOOT. Restart at step 3
- After you have HBOOT 7.0 and HTC 4.0, you must flash a new recovery.
- There is a file for every OS (ends in .bat -> Windows, etc)
- Double check that file for your OS and it'll flash a new recovery.
- Then flash MIUI ZIP via Recovery
g12_v4_tools_20120724.zip
MaesTRo's said:
Update your recovery.
Check HBOOT version is 1.7 or below
Boot to recovery.
Flash stock ZIP file which is included in ZIP file.
Tutorial if you DONT have 4.0 / Updated HBOOT
You need S-OFF and HBOOT 7.0. If you have HBOOT 6.8 follow steps 2
- Rename the file PG88IMG_hboot7.0.zip to PG88IMG.zip. Follow Steps (4-7)
- If you have HBOOT 7.0 and S-OFF. Flash this PG88IMG_SAGA_ICS.zip.
- Place on root of SD Card.
- Turn phone off.
- Boot with Vol Down and Power to enter Fastboot (or adb reboot bootloader)
- Press vol key. That will start update of HBOOT. Restart at step 3
- After you have HBOOT 7.0 and HTC 4.0, you must flash a new recovery.
- There is a file for every OS (ends in .bat -> Windows, etc)
- Double check that file for your OS and it'll flash a new recovery.
- Then flash MIUI ZIP via Recovery
g12_v4_tools_20120724.zip
Click to expand...
Click to collapse
Can you just put the boot.img so that miuiandroid users can use the rom directly
On Miui.com thread a guy posted the boot.img.
But you need to download from here :http://115.com/file/an6ehsht
Last 2012-8-4 21:46 HeavenDemon
official 4.0 with boot.img on: http://115.com/file/an6ehsht
brush into the tool: http://115.com/file/dpgwj99u
I cannot connect to WiFi using the rom. Tried with different kernels. Anybody have the same experience?
I installed the Rom with Tutorial but still have Superuser and same FC installing any apk file problems..
show black screen after flash rom ,what i do
Thanks for posting.
No problems downloading and it runs well, I don't know why others have problems...The only thing I encountered was the WiFi not being able to connect as ADHOC, I flashed another supplicant and it shows the network but will never even try to connect..Also reboot into recovery option? I'm surprised there wasn't one. The default launcher (personal taste) completely sucks, trebuchet? Some good features such as access flashlight from lockscreen (my favorite) and configurable back button to kill delay, excellent!! and a few other small things.
twiice said:
Thanks for posting.
No problems downloading and it runs well, I don't know why others have problems...The only thing I encountered was the WiFi not being able to connect as ADHOC, I flashed another supplicant and it shows the network but will never even try to connect..Also reboot into recovery option? I'm surprised there wasn't one. The default launcher (personal taste) completely sucks, trebuchet? Some good features such as access flashlight from lockscreen (my favorite) and configurable back button to kill delay, excellent!! and a few other small things.
Click to expand...
Click to collapse
I am Chinese, I want to show something I read from miui.com forum for desire s.
1. For wifi cannot connect as adhoc, this is because miui remove this feature from v4, so all the official miui v4 devices do not support this feature at all.
2. The rom is based on HTC China 4.0 OTA, not CM9, so the size is increase strangely.
3. There are some UIs with HTC Sense included, the bug is reported to miui dev team, but no response.
4. Some people have the networklocation apk fc, it's because miui use baidu apk for location, not google.
5. Some people said the rom is extremely un-smooth (maybe I use the wrong word), especially when sliding icons on desktop and open folders.
6. The GPU 2d accelerate is disabled by miui dev team because of the issue from the Qualcomm chip. (But the port version can enable this)
7. After pressing home button to return to desktop, the rom reflection is very very slow.
These bugs are found by miui forum, can any devs fix them? Especially for 3,4,5,6,7:angel:
I have built a custom firmware for the Cube U30GT-H model (H only) which provides full root and default language to English rather than Chinese.
This firmware is based on the stock Android 4.1 Jelly Bean firmware 1.05H from Cube.
Firmware download: kasty-cube_u30gt_h-41-01.zip (direct link)
Flash with Rockchip flasher 1.5 (for RK3066 tablets)
Edit: 1.06 rooted version is here: kasty-cube_u30gt_h-41-106-rooted.zip (direct link)
Latest versions are posted here Cube UG30GT forum on arctablet.com
Official Cube U30GT -H V1.06 and Cube U30GT-W V1.10 (24 Aug 2012)
arctablet said:
I have built a custom firmware for the Cube U30GT-H model (H only) which provides full root and default language to English rather than Chinese.
This firmware is based on the stock Android 4.1 Jelly Bean firmware 1.05H from Cube.
Firmware download: kasty-cube_u30gt_h-41-01.zip (direct link)
More details here
Flash with Rockchip flasher 1.5 (for RK3066 tablets)
Click to expand...
Click to collapse
Cube have released a new rom which fixes Correction TF card mount and HDMI hibernation may not be able to wake
Cube U30GT - H
http://www.51cube.net/ch/DownShow.asp?ID=67
Cube U30GT - W
http://www.51cube.net/ch/DownShow.asp?ID=66
When do you think you will be able to work your magic on this version?
ceptic said:
Cube have released a new rom which fixes Correction TF card mount and HDMI hibernation may not be able to wake
Cube U30GT-H
http://www.51cube.net/ch/DownShow.asp?ID=67
Cube U30GT - W
http://www.51cube.net/ch/DownShow.asp?ID=66
When do you think you will be able to work your magic on this version?
Click to expand...
Click to collapse
I have done the U30GT-H 1.06H firmware.
http://www.arctablet.com/blog/featured/cube-u30gt-h-android-4-1-jb-firmware-root-and-pip/
I'll have a look at the U30GT-W
I have just flashed your "kasty-cube_u30gt_h-41-03.zip" and it is not rooted! Whats wrong?
capo56 said:
I have just flashed your "kasty-cube_u30gt_h-41-03.zip" and it is not rooted! Whats wrong?
Click to expand...
Click to collapse
Root is fine here, Titanium back runs fine, Root Checker confirms it's rooted.
Which application is having problem with root ?
It seams as I am lame user. I can confirm now it is rooted. But it was not before - titanium backup had a problem and root checker also showed that it is not rooted. I have no idea what was wrong' maybe some restart solved it without my attendance
capo56 said:
It seams as I am lame user. I can confirm now it is rooted. But it was not before - titanium backup had a problem and root checker also showed that it is not rooted. I have no idea what was wrong' maybe some restart solved it without my attendance
Click to expand...
Click to collapse
Well, it should be rooted and stay like this at first boot. Thanks for confirming it's working
Everyone just forgot to mention, that HD video playback is not working in this realease... In the original from Cube site it works.
how to extract kernel from cube ROm website?thanks
ceptic said:
Cube have released a new rom which fixes Correction TF card mount and HDMI hibernation may not be able to wake
Cube U30GT - H
http://www.51cube.net/ch/DownShow.asp?ID=67
Cube U30GT - W
http://www.51cube.net/ch/DownShow.asp?ID=66
When do you think you will be able to work your magic on this version?
Click to expand...
Click to collapse
How do I flash this I'm new to having a cube?
I have updated my rooted based on latest Cube U30GT-H firmware version 1.07 released today.
Features:
- root with SuperSU 0.96 (free version)
- made /system partition writable
- removed most Chinese and unnecessary applications
- increased space for application (/data partition) to 2 Gb.
http://www.arctablet.com/blog/forum/cube-u30gt/cube-u30gt-h-firmware-update-1-07-2012-09-25-just-released/
Did anyone with with the SD card problem give it a try? Does it solve this issue as well?
another link if possible?
Just installed 1.07 on my U30GT-H (guess it is a H, got it from Pandawill,no label, H FW boots fine).
Unfortunately the SDCARD problem with my 32GB Samsung Class10 micro sd-card is still not fixed. This card does not even work with NTFS format.
Has some1 get Gameloft games like asphalt 7/ the amazing spider-man working on u30gt-h rooted? I thried the buid.prop modification but no luck....
thank you OP
Thanks for clean & rooted ROM.
No SD problems for me, and no asphalt 7 either (yes, I bought it.)
how you set tablet at flashing mod? i press volume and power keys but nothing
gerstavros said:
how you set tablet at flashing mod? i press volume and power keys but nothing
Click to expand...
Click to collapse
Switch cube off.
Connect to PC.
Run RK flash tool.
Hold volume+ and power you will here cube connecting to PC release buttons. Should show connected on flash tool.
Sent from my GT-I9100 using Xparent ICS Tapatalk 2
Thanks. I have a problem with connecting to thomson routers..why? other routers no problem
Wifi channel?
gerstavros said:
Thanks. I have a problem with connecting to thomson routers..why? other routers no problem
Click to expand...
Click to collapse
Hi,
maybe your problem is related to the WIFI channel the router is using?
Is the router visible in wifi settings? If not, you can try to change the wifi channel.
Hi, i got a prestigio multipad 5080 pro, i rooted my device and everything was fine until i changed the DPI of my device in order to play dead space. Now my device keeps says "unfortunately, launcher has stopped" on a loop is there any way to fix this? i have tried factory reset and it did nothing.
Thanks.
a good rom and stable so far.
download from here
http: // x--t-e-a-m. blogspot. it/ and click on Download:
XTeam 4.1 QUI
plus for setting your external sd as a nand *as a main installing card... use this http :// crewrktablets. arctablet. com/?wpfb_dl=330
use google translate cause its italian website...anyway ...
steps are easy ... unrar XTeam 4.1 ...
1) Turn off your device
2) Locate the folder Rockusb_driver in the XTeam 4.1 folder and install the drivers for your computer.
3) on the tablet Hold sounds Down Button and connect the device.
4) open with right click and run as administrator the rk29update.exe
5) press the button "formatta!!!"
6) tick the "Loader"
7) Download this kernel from here: http: // www .2shared. com/file/GmdSyNG1/kernel_for_pmp_5080cpro_with_o.html
 replace the kernel with the one that i gave you from the link
9) press the "Aggiorna! ! " button and wait until the program overwrite the new firmware
10)when the tablet reboot it will go through cwm and the install the
Oma CM10 ExtSD To NAND OTG Fix.
11) the new firmware have OTA updater so update your tablet until you have no other updates...(i realised that i had to download the updates from ota and install them manual but anyway...)
12) in one point the updates from ota updater will change your kernel but dont worry.you will just lose temporary the screen rotation so...
install all the updates and in the end run the rk29update.exe again untick all the things there and keep only the kernel ticked and use the kernel i gave you.that match with your 5080 cpro. this time dont push formatta !!!.
Just overwrite the kernel and click aggiorna! !
your device will restart and ta da !!! you have the latest firmware for your Prestigio 5080 C PRO. overclocked and rooted with 1 giga for apps
plus 2x faster than factory's firmware.
i wanna say a big thanx to OMA for the kernel http: //crewrktablets. arctablet. com/
a big thanx to X TEAM for this awesome firmware
and a huge thanx to my self that i had the patience to search for the specific model what to do. It took me about 2 days to gather all the informations i needed.
And a huge apologize to oma that i didnt use his JB version for the prestigio tablet but i test it and it was kinda slow and laggy for my tablet xD
ps: in case that u need more info i ll be around to help you
Remember the steps are only for Prestigio PMP 5080 C PRO and NOT for the Prestigio 5080B.
For the Prestigio 5080B you must find the specific Kernel that works on the device cause else you will have problem with the ROTATION
Sent from my Xteam Smartpad 810c using Tapatalk HD
Hey, please spare some time for me as I really want this to be fixed
I am using a Mini Pro running on Stock ROM and Kernal
It is rooted and has CWM 5.0.2.7-nAa
I recently downloaded Cyanogenmod 9.1 for my xperia mini pro (Sk17i) (Mango)
I went through the following steps to install it:
Did data/factory wipe
Wiped cache partition
Wiped Dalvik cache
Wiped battery stats
Then i proceeded to install .zip from sd card and so on until i located the .zip which was on my sd cards root directory
put it to install and i end up with this
--Installing: /sdcard/cm9.1.0-mango.zip
Finding update package
Opening update package
Installing update
assert failed: getprop ("ro.product.device") == "SK17i" | | getprop ("ro.build.product") == "SK17i" | | getprop ("ro.product.device") == "SK17a" | | getprop ("ro.build.product") == "SK17a" | | getprop ("ro.product.device") == "mango" | | getprop ("ro.build.product") == "mango"
E:Error in /sdcard/cm-9.1.0-mango.zip
(Status 7)
Installation aborted.
I want to know why i am getting this
I tried CM10 and 7 for my device and i get the same errors
Please give me instructions on what to do in the most simplest ways possible, you can give links to tutorials but i may find them hard because most seem complicated to me so please try and tell me in your own simple words what to do, I am a complete noob at this
I want to Install Cyanogenmods Rom so that i can install a firmware that makes the music volume more precise and makes the phone faster
I need all the help I can so please
Any additional info you want, just ask
Naweed Reza said:
Hey, please spare some time for me as I really want this to be fixed
I am using a Mini Pro running on Stock ROM and Kernal
It is rooted and has CWM 5.0.2.7-nAa
I recently downloaded Cyanogenmod 9.1 for my xperia mini pro (Sk17i) (Mango)
I went through the following steps to install it:
Did data/factory wipe
Wiped cache partition
Wiped Dalvik cache
Wiped battery stats
Then i proceeded to install .zip from sd card and so on until i located the .zip which was on my sd cards root directory
put it to install and i end up with this
--Installing: /sdcard/cm9.1.0-mango.zip
Finding update package
Opening update package
Installing update
assert failed: getprop ("ro.product.device") == "SK17i" | | getprop ("ro.build.product") == "SK17i" | | getprop ("ro.product.device") == "SK17a" | | getprop ("ro.build.product") == "SK17a" | | getprop ("ro.product.device") == "mango" | | getprop ("ro.build.product") == "mango"
E:Error in /sdcard/cm-9.1.0-mango.zip
(Status 7)
Installation aborted.
I want to know why i am getting this
I tried CM10 and 7 for my device and i get the same errors
Please give me instructions on what to do in the most simplest ways possible, you can give links to tutorials but i may find them hard because most seem complicated to me so please try and tell me in your own simple words what to do, I am a complete noob at this
I want to Install Cyanogenmods Rom so that i can install a firmware that makes the music volume more precise and makes the phone faster
I need all the help I can so please
Any additional info you want, just ask
Click to expand...
Click to collapse
Seems to me u probably have a device not "introducing" itself properly Or maybe it's build...
Maybe try the other way around and it right since the beginning.
Get yourself first:
- stock kernel & s/w rreinstalled (via PC Companion)
- since this is sk17i - unlock ur bootloader via official Sony way: http://unlockbootloader.sonymobile.com/ (yet first watch the tutorial form Mihahn: http://forum.xda-developers.com/showthread.php?p=31376248#post31376248 )
- get urself latest FlashTool and install it (http://androxyde.github.com/), use it to root ur phone -> http://forum.xda-developers.com/showthread.php?p=30441163#post30441163
-
- go in very details through here http://forum.xda-developers.com/showthread.php?t=1629334 and
1. download Kernel TFT (appropriate one) and flash it using flash tool (and guess what... here is picture guide by Mihahn: http://forum.xda-developers.com/showthread.php?t=1879982)
2. upload CM9-3 to sd card and try again with CWMRec/Flashtool mode install (depending whether u download .zip or .tft with ROM)
and read read read before u do smthng bad to ur small friend.
PsychoFish81 said:
Seems to me u probably have a device not "introducing" itself properly Or maybe it's build...
Maybe try the other way around and it right since the beginning.
Get yourself first:
- stock kernel & s/w rreinstalled (via PC Companion)
- since this is sk17i - unlock ur bootloader via official Sony way: http://unlockbootloader.sonymobile.com/ (yet first watch the tutorial form Mihahn: http://forum.xda-developers.com/showthread.php?p=31376248#post31376248 )
- get urself latest FlashTool and install it (http://androxyde.github.com/), use it to root ur phone -> http://forum.xda-developers.com/showthread.php?p=30441163#post30441163
-
- go in very details through here http://forum.xda-developers.com/showthread.php?t=1629334 and
1. download Kernel TFT (appropriate one) and flash it using flash tool (and guess what... here is picture guide by Mihahn: http://forum.xda-developers.com/showthread.php?t=1879982)
2. upload CM9-3 to sd card and try again with CWMRec/Flashtool mode install (depending whether u download .zip or .tft with ROM)
and read read read before u do smthng bad to ur small friend.
Click to expand...
Click to collapse
Thanks for replying
I will try it out and let you know how it went
I dont get the first bit about getting a stock kernal and s/w reinstalled
Does that basically mean unroot my phone or something
And whats s/w (Sorry for being a complete noob)
More doubts, really sorry
PsychoFish81 said:
Seems to me u probably have a device not "introducing" itself properly Or maybe it's build...
Maybe try the other way around and it right since the beginning.
Get yourself first:
- stock kernel & s/w rreinstalled (via PC Companion)
- since this is sk17i - unlock ur bootloader via official Sony way: http://unlockbootloader.sonymobile.com/ (yet first watch the tutorial form Mihahn: http://forum.xda-developers.com/showthread.php?p=31376248#post31376248 )
- get urself latest FlashTool and install it (http://androxyde.github.com/), use it to root ur phone -> http://forum.xda-developers.com/showthread.php?p=30441163#post30441163
-
- go in very details through here http://forum.xda-developers.com/showthread.php?t=1629334 and
1. download Kernel TFT (appropriate one) and flash it using flash tool (and guess what... here is picture guide by Mihahn: http://forum.xda-developers.com/showthread.php?t=1879982)
2. upload CM9-3 to sd card and try again with CWMRec/Flashtool mode install (depending whether u download .zip or .tft with ROM)
and read read read before u do smthng bad to ur small friend.
Click to expand...
Click to collapse
I am so sorry if I am bothering you or anything but I was going through the links, very handy and simple, and i came across this in the last link you have put about downlaoding a kernal .TFT
When reading through it says
Now you are ready to install a custom rom/kernel.
Let's start:
You go to development section and choose a rom you want for your device. You download the rom and the kernel for your device (make sure it is the right for yours! Sometimes the kernel is included in the installation zip file of the rom.
Now you have the boot.img and the rom
Click to expand...
Click to collapse
Now where is the Development section?
Where do i find the Boot.img?
What is the proper one for my sk17i?
I have downloaded CM9.1 for Mango from the cm official website and there is a boot.img inside the zip, should i just extract the boot.img out and keep it near the .zip file? and should i use this instead of the mini cm provided?
I really appreciate the links you have given and hope all my doubts can be cleared for me to actually start the process
Will hit that thanks button if it is a success :good:
Naweed Reza said:
Thanks for replying
I will try it out and let you know how it went
I dont get the first bit about getting a stock kernal and s/w reinstalled
Does that basically mean unroot my phone or something
And whats s/w (Sorry for being a complete noob)
Click to expand...
Click to collapse
S/W = Software.
To install stock software, even if ur phone is in bootloop, u may use PC Companion.
1. Start mobile in Flash mode (BACK/VOL+/- pressed when phone turned off and connecting usb cable + PC Companion enabled)
2. Agree on loosing all data Choose model (be careful -u20 and sk17i and sk17a are all mini pro, use hardware version marking)
3. allow it to work - it will download stock software for ur mini pro
Effect: unroot stock phone. U can root it again with FlashTool or one of root methods (for sk17i I believe so called zergRush does the job - search forums or gogole it )
Afterwards proceed with instructions for
1. Rooting
2. Unlocking bootloader
3. Reflashing phone with custom kernel and custom ROM
BE ADVISED: Above "root/unlock bootloader" actions usually void ur warranty. Be sure what u r doing, read thoroughly steps to not brick ur phone and do not be scared if bootloop happens - just find a way to enter flash mode again and use other .tft/ROM
OR - if u have already unlocked bootloader - simply download appropriate .tft file and flash it on ur phone using FlashTool. (the so called generic sk17i ROM has been provided in .tft format here: http://rumah-android.com/official-xperia-mini-pro-sk17i-4-1-b-0-431-firmware-ics-4-0-4.html)
U mighgt want to see through some of posts here to reduce ur noobishness http://forum.xda-developers.com/showthread.php?t=471521
And use custom kernels/stock roms known for their stability in latest release/nigh release (search for xda forum threads).
PsychoFish81 said:
Seems to me u probably have a device not "introducing" itself properly Or maybe it's build...
Maybe try the other way around and it right since the beginning.
Get yourself first:
- stock kernel & s/w rreinstalled (via PC Companion)
- since this is sk17i - unlock ur bootloader via official Sony way: http://unlockbootloader.sonymobile.com/ (yet first watch the tutorial form Mihahn: http://forum.xda-developers.com/showthread.php?p=31376248#post31376248 )
- get urself latest FlashTool and install it (http://androxyde.github.com/), use it to root ur phone -> http://forum.xda-developers.com/showthread.php?p=30441163#post30441163
-
- go in very details through here http://forum.xda-developers.com/showthread.php?t=1629334 and
1. download Kernel TFT (appropriate one) and flash it using flash tool (and guess what... here is picture guide by Mihahn: http://forum.xda-developers.com/showthread.php?t=1879982)
2. upload CM9-3 to sd card and try again with CWMRec/Flashtool mode install (depending whether u download .zip or .tft with ROM)
and read read read before u do smthng bad to ur small friend.
Click to expand...
Click to collapse
PsychoFish81 said:
S/W = Software.
To install stock software, even if ur phone is in bootloop, u may use PC Companion.
1. Start mobile in Flash mode (BACK/VOL+/- pressed when phone turned off and connecting usb cable + PC Companion enabled)
2. Agree on loosing all data Choose model (be careful -u20 and sk17i and sk17a are all mini pro, use hardware version marking)
3. allow it to work - it will download stock software for ur mini pro
Effect: unroot stock phone. U can root it again with FlashTool or one of root methods (for sk17i I believe so called zergRush does the job - search forums or gogole it )
Afterwards proceed with instructions for
1. Rooting
2. Unlocking bootloader
3. Reflashing phone with custom kernel and custom ROM
BE ADVISED: Above "root/unlock bootloader" actions usually void ur warranty. Be sure what u r doing, read thoroughly steps to not brick ur phone and do not be scared if bootloop happens - just find a way to enter flash mode again and use other .tft/ROM
OR - if u have already unlocked bootloader - simply download appropriate .tft file and flash it on ur phone using FlashTool. (the so called generic sk17i ROM has been provided in .tft format here: http://rumah-android.com/official-xperia-mini-pro-sk17i-4-1-b-0-431-firmware-ics-4-0-4.html)
U mighgt want to see through some of posts here to reduce ur noobishness http://forum.xda-developers.com/showthread.php?t=471521
And use custom kernels/stock roms known for their stability in latest release/nigh release (search for xda forum threads).
Click to expand...
Click to collapse
Alright, thanks alot
Will get to it
I cant just plug my phone in and use the repair option from support zone?
It says that will erase all internal memory by replacing the software
So should I use that method?
And yeah, ive experience bootloop before so im fine and know what to do
And after all this is done and i get everything tis fine to restore my apps and studd using titanium right?
Naweed Reza said:
Now where is the Development section?
Where do i find the Boot.img?
What is the proper one for my sk17i?
I have downloaded CM9.1 for Mango from the cm official website and there is a boot.img inside the zip, should i just extract the boot.img out and keep it near the .zip file? and should i use this instead of the mini cm provided?
I really appreciate the links you have given and hope all my doubts can be cleared for me to actually start the process
Will hit that thanks button if it is a success :good:
Click to expand...
Click to collapse
Development Section is a section of XDA forum, where crazy programmers deliver their kernels and ROMS...
This link is in Development Section, I believe the CM u r looking for:
http://forum.xda-developers.com/showthread.php?t=1629334
Be advised - above CM requires custom kernel sk17i, it says it in Requirements in above link -> http://forum.xda-developers.com/showthread.php?p=25550442
If u succeed to unlock bootloader, it gets pretty simple, simpler than in Mihahn guide.
1. Given u have bootloader unlocked: using FlashTool u flash kernel (the .tft file) - thus u won't have to care about separate boot.img / .sin files flashing, they are incorporated in .tft thing.
2, If it suceeds - using flashtool u reset to recovery
3. USING CWM options - u mount ur USB storage
4. U put from ur PC zip with CM9
5. Unmount USB storage
6. Wipe all data as it says in ROM thread - otherwise u risk **** to hit the fan
7. Update from .zip, point to zip on sdcard
8.Relax
9. Get cofee
10. Relax
11. Watch it progress
12. Relax
13. Pray for best
14. After it finishes - reboot to normal. Be advised - first reboot after flashing ROM is always long, linux + ROM does automagic stuff
Short who's who:
kernel; linux kernel, da animal that is engine of subsequent android devices (i.e. kernel with Ice Cream Sandwich or Jelly Beans Adnroid releases) U NEED CAREFULLY CHOOSE THE ONE APPRIOPRIATE FOR UR DEVICE
ROM - closest to operating system u get on mobile devices, u might have different ROMs wortking on specific kernel
CWM - clockworkmode recovery - ur last resort if **** hits the fan to change ROM without reflashing kernel
I hope I got this as simple as I could... Sorry, I was former mobile s/w developer, such stuff is just usual for me, my stock u20i software didn't last 24h - I just immediately reflashed it co CM6, later to CM7 - just to have some options not available in stock rom connected to power management and application management.
EDIT: Combining answers
Naweed Reza said:
Alright, thanks alot
Will get to it
I cant just plug my phone in and use the repair option from support zone?
It says that will erase all internal memory by replacing the software
So should I use that method?
And yeah, ive experience bootloop before so im fine and know what to do
And after all this is done and i get everything tis fine to restore my apps and studd using titanium right?
Click to expand...
Click to collapse
Yes.
Generic ROM / Repair options brings u back to stock sk17i SE ROM. I dont remeber if repair option uploaded latest update, if yes - u might still have to use generic sk17i tft thing.
With restoring option - to be honest I didn't test it. It didn't worked well for me on CM6 and CM7 upgrade, yet possibly I did not all the things right. Still, if u have backed up apps and data on sdcard, it might be possible - please check it before reflashing ROMS (just root, install latest titanium backup and simply test the stuff).
Good luck on ur journey to reflash...
PsychoFish81 said:
Development Section is a section of XDA forum, where crazy programmers deliver their kernels and ROMS...
This link is in Development Section, I believe the CM u r looking for:
http://forum.xda-developers.com/showthread.php?t=1629334
Be advised - above CM requires custom kernel sk17i, it says it in Requirements in above link -> http://forum.xda-developers.com/showthread.php?p=25550442
If u succeed to unlock bootloader, it gets pretty simple, simpler than in Mihahn guide.
1. Given u have bootloader unlocked: using FlashTool u flash kernel (the .tft file) - thus u won't have to care about separate boot.img / .sin files flashing, they are incorporated in .tft thing.
2, If it suceeds - using flashtool u reset to recovery
3. USING CWM options - u mount ur USB storage
4. U put from ur PC zip with CM9
5. Unmount USB storage
6. Wipe all data as it says in ROM thread - otherwise u risk **** to hit the fan
7. Update from .zip, point to zip on sdcard
8.Relax
9. Get cofee
10. Relax
11. Watch it progress
12. Relax
13. Pray for best
14. After it finishes - reboot to normal. Be advised - first reboot after flashing ROM is always long, linux + ROM does automagic stuff
Short who's who:
kernel; linux kernel, da animal that is engine of subsequent android devices (i.e. kernel with Ice Cream Sandwich or Jelly Beans Adnroid releases) U NEED CAREFULLY CHOOSE THE ONE APPRIOPRIATE FOR UR DEVICE
ROM - closest to operating system u get on mobile devices, u might have different ROMs wortking on specific kernel
CWM - clockworkmode recovery - ur last resort if **** hits the fan to change ROM without reflashing kernel
I hope I got this as simple as I could... Sorry, I was former mobile s/w developer, such stuff is just usual for me, my stock u20i software didn't last 24h - I just immediately reflashed it co CM6, later to CM7 - just to have some options not available in stock rom connected to power management and application management.
EDIT: Combining answers
Yes.
Generic ROM / Repair options brings u back to stock sk17i SE ROM. I dont remeber if repair option uploaded latest update, if yes - u might still have to use generic sk17i tft thing.
With restoring option - to be honest I didn't test it. It didn't worked well for me on CM6 and CM7 upgrade, yet possibly I did not all the things right. Still, if u have backed up apps and data on sdcard, it might be possible - please check it before reflashing ROMS (just root, install latest titanium backup and simply test the stuff).
Good luck on ur journey to reflash...
Click to expand...
Click to collapse
Thanks,
Using SUS right now and its repairing, hoping for the best, I only lose contacts messages and calender
The rest is backed up with titanium
I will inform you when im donw through the whole process
And do i have to install CM Mini?
Or i can choose any Cyanogenmod for my phone? (THe Sk17i ones from the official website) or i have to only use the one you provided
Naweed Reza said:
Thanks,
Using SUS right now and its repairing, hoping for the best, I only lose contacts messages and calender
The rest is backed up with titanium
I will inform you when im donw through the whole process
And do i have to install CM Mini?
Or i can choose any Cyanogenmod for my phone? (THe Sk17i ones from the official website) or i have to only use the one you provided
Click to expand...
Click to collapse
U can choose any CyanogenMod marked as suitable for ur phone (xperia mini pro, sk17i), yet
- PAY ATTENTION TO REQUIREMENTS: rooting, unlocking bootloader, which kernel version etc.
- READ SEVERAL TIMES BEFORE EXECUTING! Very important... developer put most important informations in posts, yet specific issuies are reproted and solved as froum thread goes by
Step 1 is done
Okay, I have Restored the phone to factory using SUS
But check this link out and see if i can flash this CM instead
http://wiki.cyanogenmod.org/index.php?title=Install_CM_for_mango
Unlocked bootloader
PsychoFish81 said:
U can choose any CyanogenMod marked as suitable for ur phone (xperia mini pro, sk17i), yet
- PAY ATTENTION TO REQUIREMENTS: rooting, unlocking bootloader, which kernel version etc.
- READ SEVERAL TIMES BEFORE EXECUTING! Very important... developer put most important informations in posts, yet specific issuies are reproted and solved as froum thread goes by
Click to expand...
Click to collapse
Okay, sorry it took long, but i just Unlocked my bootleader, after restarting my phone i get the welcome message and basically everything is like it was out of the box, is that supposed to happen?
Does unlocking the bootloader reset my phone?
Btw i used the CMD Method
Not rooting
PsychoFish81 said:
U can choose any CyanogenMod marked as suitable for ur phone (xperia mini pro, sk17i), yet
- PAY ATTENTION TO REQUIREMENTS: rooting, unlocking bootloader, which kernel version etc.
- READ SEVERAL TIMES BEFORE EXECUTING! Very important... developer put most important informations in posts, yet specific issuies are reproted and solved as froum thread goes by
Click to expand...
Click to collapse
HELP
I have flashed the kernal to a xperia arc kernal (TO downgrade for rooting)
I start up doomlords rooter thingy
And once i press anykey its on this
daemon not running. Start it now
daemon started successfully
And its just there
Ive used this program to root before and it worked
Btw after installing the neo kernal the phone doesnt restart, only on black scree, ive gotten that before but it had rooted successfully before
Please help me out :/
what are you doing?
if you want cm10, you don't need to root you phone, just simply flashing the rom will give you root
also flashing a kernel not meant for your device will obviosely create problems
instead try flashing this kernel
http://forum.xda-developers.com/showthread.php?t=2076764
and this rom
http://forum.xda-developers.com/showthread.php?t=1780326
Sorry for the inconvinience
Alright then, sorry for my stupidity, i realized the phone had to be connected in MSC
*Facepalm*
Rooting done, going to now flash it back
Wish me luck :fingers-crossed:
Thanks alot
PsychoFish81 said:
Seems to me u probably have a device not "introducing" itself properly Or maybe it's build...
Maybe try the other way around and it right since the beginning.
Get yourself first:
- stock kernel & s/w rreinstalled (via PC Companion)
- since this is sk17i - unlock ur bootloader via official Sony way: http://unlockbootloader.sonymobile.com/ (yet first watch the tutorial form Mihahn: http://forum.xda-developers.com/showthread.php?p=31376248#post31376248 )
- get urself latest FlashTool and install it (http://androxyde.github.com/), use it to root ur phone -> http://forum.xda-developers.com/showthread.php?p=30441163#post30441163
-
- go in very details through here http://forum.xda-developers.com/showthread.php?t=1629334 and
1. download Kernel TFT (appropriate one) and flash it using flash tool (and guess what... here is picture guide by Mihahn: http://forum.xda-developers.com/showthread.php?t=1879982)
2. upload CM9-3 to sd card and try again with CWMRec/Flashtool mode install (depending whether u download .zip or .tft with ROM)
and read read read before u do smthng bad to ur small friend.
Click to expand...
Click to collapse
If I ever meet you in real life, i would give you a hug
I dont know how to thank you!
It worked, i followed the original instructions which are quoted above ^ and it worked
I used a .img file to flash using flashtool and then flashed using CWM6 which came with the kernal
In the startup process
One thing that is a bummer is the slide out keyboards symbols which are printed on my phone do not match the ones which came with CM9
Meaning, on letter 'M' there is the symbol "%" in blue, so when i press the function button on the keyboard i end up with another Symbol when pressing "M", any way to fix it??
And one more thing
I have CM9, is it recommended to install CM10 nightly or should i wait for a stable release?
And if CM10 was good to install what steps should I use to install it?
Should i just place the .zip in the root of sd, then bootup in CWM and then install zip from sdcard?
Or i use the method you gave above?
Or I just boot in CWM and clear data and install from SD?
Hoping for a reply, and thanks alot! :laugh:
Naweed Reza said:
If I ever meet you in real life, i would give you a hug
I dont know how to thank you!
It worked, i followed the original instructions which are quoted above ^ and it worked
I used a .img file to flash using flashtool and then flashed using CWM6 which came with the kernal
In the startup process
One thing that is a bummer is the slide out keyboards symbols which are printed on my phone do not match the ones which came with CM9
Meaning, on letter 'M' there is the symbol "%" in blue, so when i press the function button on the keyboard i end up with another Symbol when pressing "M", any way to fix it??
And one more thing
I have CM9, is it recommended to install CM10 nightly or should i wait for a stable release?
And if CM10 was good to install what steps should I use to install it?
Should i just place the .zip in the root of sd, then bootup in CWM and then install zip from sdcard?
Or i use the method you gave above?
Or I just boot in CWM and clear data and install from SD?
Hoping for a reply, and thanks alot! :laugh:
Click to expand...
Click to collapse
if you want to install a cm10 you need a compatible cm 10 kernel
this one is good http://forum.xda-developers.com/showthread.php?t=2076764
cm 10 is very stable I also have the xperia mini pro and this rom is so awesome
http://forum.xda-developers.com/showthread.php?t=1832308
just follow the instructions for both links you should have cm10 in no time
cs098 said:
if you want to install a cm10 you need a compatible cm 10 kernel
this one is good http://forum.xda-developers.com/showthread.php?t=2076764
cm 10 is very stable I also have the xperia mini pro and this rom is so awesome
http://forum.xda-developers.com/showthread.php?t=1832308
just follow the instructions for both links you should have cm10 in no time
Click to expand...
Click to collapse
The CM10 Nightly i download from CM official website has a boot.img inside the zip
I can use that as the kernal to flash?
Naweed Reza said:
The CM10 Nightly i download from CM official website has a boot.img inside the zip
I can use that as the kernal to flash?
Click to expand...
Click to collapse
yep any cm10 kernel would work, however the fxp one does not have the best battery life or the best performance but it is the most stable
At the end of the update in question was published by the official units.
Notice that the beta version is.
resource connection : https://bbs.nubia.cn/thread-1462621-1-1.html
As an informative question: If we update the rooted and installed gapps in all versions, can there be a problem?
For example, you may be deprived of gappa until you have Brick or New root?
chinese english translation is bad because i did not understand.
*Changes*
* JOS updated X-JOS
* Android 8.1 version updated Android 9.0
*System optimization : system performance, enhance the overall fluency
*optimization: system stability
*optimization: Android update security patches
*smart card services added: "fast application" card and enjoy the native application experience the performance of third-party applications
*optimization: Some third-party application stability
*fix: part of the game (the king of glory, to stimulate the battlefield) probability of the emergence of flash back problems
this update optimized content including but not limited to the above-listed items
Note precautions: ● This is a trial version upgrade, only support SD card upgrade package: After you download this version of the full SD card pack, then click on "Settings" -> "System Update" -> "button in the upper right corner function" -> "local upgrade", select SD card pack, click the "install now" wait upgrade is complete;●trial version where there may be imperfections on experience details, please according to their own circumstances choose to upgrade;●upgrade this version P Andrews after, if you want to roll back to previous versions, you need to back up phone data,Shuangqing SD card pack before upgrading history, after the completion of normal use;● Make sure the phone battery before upgrading adequate and mobile phone data backup (recommended use its own backup software), so as not to cause the phone to upgrade data loss; ●before upgrading, cancellation of various screen lock, the upgrade process, make sure the phone flat, and not arbitrarily touch the screen, follow the onscreen prompts ;● as already get Root privileges, be sure to remove the Root privileges, the state returned to normal version, and restore the factory settings before upgrading, otherwise easily lead to the escalation Defeated.
Download Link: http://romdownload.nubia.com/nubiaX/V3.05/NX616J-update.zip
Altarnatife Download Link : https://drive.google.com/file/d/1AqeiP-uQYI5jq7m1SabJ51h1MFn31pkn/edit
Thanks : @Ravira43
MD5 code: 66DD854D61C742326C01200E580E2952
It's not possible to download, tried using china vpn and without.
The download dies after 100mb
Could you upload it to another location (maybe google?)
Ravira43 said:
It's not possible to download, tried using china vpn and without.
The download dies after 100mb
Could you upload it to another location (maybe google?)
Click to expand...
Click to collapse
Hi. I need to ask. What does this mean? Does this include Play Store? Is it a global version?
Or is it just another Chinese ROM?
Thank you!
Ravira43 said:
It's not possible to download, tried using china vpn and without.
The download dies after 100mb
Could you upload it to another location (maybe google?)
Click to expand...
Click to collapse
Used " internet download menager " and search google " idm 16 part download" use.
gigilex said:
Hi. I need to ask. What does this mean? Does this include Play Store? Is it a global version?
Or is it just another Chinese ROM?
Thank you!
Click to expand...
Click to collapse
No, only Chinese ROM. unlucky.
But İnstall new Play store way
1. https://bbs.nubia.cn/thread-1464227-1-1.html
2. https://bbs.nubia.cn/thread-1462852-1-1.html
Never mind, a friend of mine has already downloaded and uploaded it on google.
Can't paste the link, because I'm a new member.
Ravira43 said:
Never mind, a friend of mine has already downloaded and uploaded it on google.
Can't paste the link, because I'm a new member.
Click to expand...
Click to collapse
I'm glad you got the solution.
I can publish the link if you throw it.
Guys I have just received an OTA update 1.4gb version 3.05 on my phone.
I would install it but my fear is to loose all data and settings.
Did anyone installed it?
I've also received the OTA update, I would try it but the chinese links for Gapps are nor working (source download not posssible)
Does anyone know how to unroot the terminal?
When local updating to 3.05, the terminal will brick.
How to install Android 9
I've installed it the following way.
Downloaded the new android version to my Nubia X.
Started localupdate via phone --> settings --> update --> localupdate.
Android 9 installed automatically without problems. Your phone should now be unrooted.
Now you need the Root-toolkit for v3.05 --> works only in windows :/
Connect your phone via usb in fastbootmode (you need to activate usb-debugging before)
Execute the root toolkit v3.05
can't post the link, somebody else have to do it.
a window opens --> close it (can't read chinese language)
another window should open --> klick on root.
wait after "success" appears.
Your phone should be restarting.
I'm using android 9 on my nubia x since a month and its working way better then android 8.
I'm not responsible if you brick your phone.
I give no guarantee
Ravira43 said:
I've installed it the following way.
Downloaded the new android version to my Nubia X.
Started localupdate via phone --> settings --> update --> localupdate.
Android 9 installed automatically without problems. Your phone should now be unrooted.
Now you need the Root-toolkit for v3.05 --> works only in windows :/
Connect your phone via usb in fastbootmode (you need to activate usb-debugging before)
Execute the root toolkit v3.05
can't post the link, somebody else have to do it.
a window opens --> close it (can't read chinese language)
another window should open --> klick on root.
wait after "success" appears.
Your phone should be restarting.
I'm using android 9 on my nubia x since a month and its working way better then android 8.
I'm not responsible if you brick your phone.
I give no guarantee
Click to expand...
Click to collapse
hi i run android 9 on my nubia x rooted, but how can we get Gapps working on it please ? thanks
I have twrp running on it too.
Ravira43 said:
I've installed it the following way.
Downloaded the new android version to my Nubia X.
Started localupdate via phone --> settings --> update --> localupdate.
Android 9 installed automatically without problems. Your phone should now be unrooted.
Now you need the Root-toolkit for v3.05 --> works only in windows :/
Connect your phone via usb in fastbootmode (you need to activate usb-debugging before)
Execute the root toolkit v3.05
can't post the link, somebody else have to do it.
a window opens --> close it (can't read chinese language)
another window should open --> klick on root.
wait after "success" appears.
Your phone should be restarting.
I'm using android 9 on my nubia x since a month and its working way better then android 8.
I'm not responsible if you brick your phone.
I give no guarantee
Click to expand...
Click to collapse
it's ok everything work fine, Nubia x android 9 with all google services OK exept voice match ( OK google from screen).
elnas1369 said:
it's ok everything work fine, Nubia x android 9 with all google services OK exept voice match ( OK google from screen).
Click to expand...
Click to collapse
Yeah I'm also looking for a solution how to remove this ****ty nubia voice and replace it with google.
Yeah it could be nice to replace it with Google assistant
I would install Android 9 but my fear is to loose all configurations, permissions, etc and It will take long time to reconfigure every thing.
My question is : is it really worth to install it or there are more or less the same performance?
Anyone knows if nubia X will have final android 9?
Guys!! I know this sounds stupid but I have no "update" option in my settings!! Please help if you know what is going on with my new Nubia X!
Shahin13 said:
Guys!! I know this sounds stupid but I have no "update" option in my settings!! Please help if you know what is going on with my new Nubia X!
Click to expand...
Click to collapse
Download the rom for Android 9, got to settings -> "System update", then from the menu up, select "Local update".
No issues with 3.05 - works fine, nothings from the apps, data or setting is flushed. But the phone is unrooted and you need to process it again.
But recently I have updated it from 3.03 to 3.11 and I can't find the root tool.
Anyone has idea where to find it?
Thanks.
3.11 play store
Looking allsou the rooting tool for 3.11. Needed play store.