Database Info

Ringke Fusion ($13.99) vs Official Bumper ($12.95)

I was wondering which case is better than the other?
I'm looking to keep the nexus 4 slim, sexy, and functional.
I narrowed it down to these two cases because of the clicky tactile feels (on the fusion revision) and the original bumper while maintaining slimness.

I got the bumper a week after I received my phone. Well, not the official one, but a replica of the LG one that's sold in the Play Store. The one I received off Amazon seemed fine, but after about a week of normal use, 2 cracks appeared - one on the bottom where the USB is, and the other on the power button.
I think that they appeared because of plugging in the phone and clicking the power button turning it on and off. The material (metal-looking plastic) that surrounds the bumper is flimsy on it's own, and with a certain amount of pressure and heat from the phone, it's prone to cracking.
If you Google around you'll find that a lot of people have had the same problem with the official one. I bought the same bumper for my friend too, but his is holding up well so far, so I'm not sure. The bumper seemed to have a tighter fit on his N4 whereas mine felt a little loose. He has been using it for a couple months as his was the first wave of N4 that were shipped out. I just got mine a little less than a month ago.
Switched over to the Ringke Fusion based on the number of excellent reviews it got both on XDA and Amazon. Took about a week to get here and because it is the revision, the buttons are clicky and give a good feedback. The case also doesn't add much bulk at all. While I do like the heft of carrying around the phone naked, the glass panels scare me. I never used cases on my old phones, but then again, they were plastic and metal. They sure could take a hit!
The Fusion makes the N4 feel more solid as it is, and it works well with wireless chargers. The only complaint I have about it is the back clear plastic tends to dirty quite easily, with scuffs, fingerprints. But then again, who takes time out of their day to gander at the back of the phone. Sure it's pretty but you'll be spending more of your time messing around with the front.

Where'd you find the official bumper for 13?
Sent from my Nexus 4 using xda app-developers app

Ace42 said:
Where'd you find the official bumper for 13?
Sent from my Nexus 4 using xda app-developers app
Click to expand...
Click to collapse
It's a replica of the real bumper. It's on ebay and amazon.
Sent from my Nexus 4 using Tapatalk 4 Beta

On amazon it says official bumer by Google 12.95 I'm in the US
zephiK said:
It's a replica of the real bumper.
It's on ebay and amazon.
Sent from my Nexus 4 using Tapatalk 4 Beta
Click to expand...
Click to collapse
Ace42 said:
Where'd you find the official bumper for 13?
Sent from my Nexus 4 using xda app-developers app
Click to expand...
Click to collapse

I remember when i bought my N4, I kept buying different bumpers because either they were too tight [messed up my screen protector], too bulky or did not protect my phone good enough. In January, I bought Ringke Fusion; been using it since then . Its not one of those cheap bumpers, you will definitely feel the quality. Its fits the phone very well and you wont feel the size of it in your hand or in your pocket.

mc704 said:
On amazon it says official bumer by Google 12.95 I'm in the US
Click to expand...
Click to collapse
It's a replica. The real ones are sold on the play store. If it says official elsewhere and is less than the price you would normally pay, chances are it's not official. Anyone can say it's official but it isn't.
Sent from my Nexus 4 using xda premium

I got both . Currently sporting the white OEM bumper. Before that I sported the Ringke Fusion. I will continue using the Fusion when I travel to like Disney lol.

kpjimmy said:
I got both . Currently sporting the white OEM bumper. Before that I sported the Ringke Fusion. I will continue using the Fusion when I travel to like Disney lol.
Click to expand...
Click to collapse
Same. I got the fusion and the white OEM bumper.
To the OP: if you haven't seen it yet, the poetic bumpers are pretty good.
Stopped using my white OEM one cause it turned yellow on the sides and can't clean it no matter what I try.
Sent from my awesome Neo Armstrong Cyclone Jet Armstrong Nexus⁴ via Tapatalk

Kendaihou said:
Same. I got the fusion and the white OEM bumper.
To the OP: if you haven't seen it yet, the poetic bumpers are pretty good.
Stopped using my white OEM one cause it turned yellow on the sides and can't clean it no matter what I try.
Sent from my awesome Neo Armstrong Cyclone Jet Armstrong Nexus⁴ via Tapatalk
Click to expand...
Click to collapse
I'm gonna use the hella out of the OEM white bumper because I got it for free .

The bumper makes the phone really wide
Sent from my Nexus 4 using Tapatalk 4 Beta

I got ringke fusion, official bumper, the white look alike of fusion and poetic. I wanna use my fusion but my tempered glass doesn't fit well with it. I'll rather go with the fusion because of its solid feeling but the bumper is good.
SENT FROM MY RAGING NEXUS⁴ ?

I got the Ringke Fusion. IT shows fingerprints REALLY bad - much worse than the back glass - and the fingerprints aren't easy to clean off unless you use water. I ended up taking it off and using the bumper I got free before finding another case.

scottharris4 said:
I got the Ringke Fusion. IT shows fingerprints REALLY bad - much worse than the back glass - and the fingerprints aren't easy to clean off unless you use water. I ended up taking it off and using the bumper I got free before finding another case.
Click to expand...
Click to collapse
Fingerprints to me don't show as bad when I put my dbrand skin on. I hardly notice any unless I view the back at an angle.

scottharris4 said:
I got the Ringke Fusion. IT shows fingerprints REALLY bad - much worse than the back glass - and the fingerprints aren't easy to clean off unless you use water. I ended up taking it off and using the bumper I got free before finding another case.
Click to expand...
Click to collapse
We talking about regular prints..? Cuz my hands are always clean, and while it definitely attract prints, a quick swipe from my t-shirt takes them right off.
Sent from my Nexus 4

So the Google bumper on amazon is fake and the fusion case attracts a butt load of finger prints
I see that most people tell me that they are using bumper instead... What bumper? Poetic?

mc704 said:
So the Google bumper on amazon is fake and the fusion case attracts a butt load of finger prints
I see that most people tell me that they are using bumper instead... What bumper? Poetic?
Click to expand...
Click to collapse
LOL I would personally get the Fusion, and yes, most bumpers online are replicas even if they are in LG packaging. The normal bumpers cost about 20bux (USD) so that's a good gauge in authentic or not.
There's a thread somewhere comparing the packaging but basically, if there's a holo sticker on the back, mine is square that reads "Original accessories by LG".
GL

Bumper
Wider
Looks better
Less protection
Ringke
Better protection
Lets you create custom designs to insert behind the plastic
horrible protruding creases on the back of the case. - rough to the touch
picks up fingerprints and dust way too easily.
I use bumper for everyday use and if i'm going to be somewhere outside for a long while where i won't have a place to put my phone safely away i use the ringke.

kpjimmy said:
Fingerprints to me don't show as bad when I put my dbrand skin on. I hardly notice any unless I view the back at an angle.
Click to expand...
Click to collapse
Does the Ringke Fusion case fit properly with a dbrand skin on? Was looking on getting the case but was not sure if it would fit on, as I have a dbrand carbon skin on the back.

Androidttraction said:
Does the Ringke Fusion case fit properly with a dbrand skin on? Was looking on getting the case but was not sure if it would fit on, as I have a dbrand carbon skin on the back.
Click to expand...
Click to collapse
Yes it fits fine. I have a custom and that's technically two skins of thickness in my areas and fits fine.

Colors of Spigen Neo Hybrid!

OK so I'm getting my s4 in the next week or so. Its gonna be white. TPU cases (especially the cheap S cases on ebay) have never failed me, I have a slim tpu one on my current s3. I've been eyeing the neo hybrid spigen cases, but most photos are with black s3. I wanna see how they would look on a white one. Please post picks if u have em, and send any other suggestions my way. I don't want my phone to crack if dropped but I don't want no Defender either, just slim, great looking protection, and the more tpu involved the better
Thanks!
Sent from my SPH-L710 using XDA Premium 4 mobile app

Not sure if you have noticed... But... XDA is not google.
Google D30 Galaxy S4 case. Those offer exceptional protection for the size.

Master Ramy said:
OK so I'm getting my s4 in the next week or so. Its gonna be white. TPU cases (especially the cheap S cases on ebay) have never failed me, I have a slim tpu one on my current s3. I've been eyeing the neo hybrid spigen cases, but most photos are with black s3. I wanna see how they would look on a white one. Please post picks if u have em, and send any other suggestions my way. I don't want my phone to crack if dropped but I don't want no Defender either, just slim, great looking protection, and the more tpu involved the better
Click to expand...
Click to collapse
Here's a white S4, with different colors Neo Hybrid Cases (reventon yellow, dante red and metal slate). And also with Slim Armor (dodger blue and metal slate)

pilot_xphile said:
Here's a white S4, with different colors Neo Hybrid Cases (reventon yellow, dante red and metal slate). And also with Slim Armor (dodger blue and metal slate)
Click to expand...
Click to collapse
Just what I needed! I hate to request more, but can you take some photos from different angles with the same seigo cases and phone, especially under white rather than yellow light?
Either way, Thanks a ton, appreciate it.
Sent from my SPH-L710 using XDA Premium 4 mobile app

Master Ramy said:
Just what I needed! I hate to request more, but can you take some photos from different angles with the same seigo cases and phone, especially under white rather than yellow light?
Either way, Thanks a ton, appreciate it.
Sent from my SPH-L710 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Looks ugly. Don't get it. Not sure what everyone's fascination with this boring case is, it's mind boggling.
I'd recommend the Verus Oneye case for a white phone. Specifically the white one.

R4NDR01D said:
Looks ugly. Don't get it. Not sure what everyone's fascination with this boring case is, it's mind boggling.
I'd recommend the Verus Oneye case for a white phone. Specifically the white one.
Click to expand...
Click to collapse
Lol you call the hybrid ugly, but bring up an even uglier bulky case. I don't have a neo hybrid but I'd rather get that than that bulky oneye
Sent from Flip's Galaxy S4

Anyone wanna suggest a better slim tpu option for white s4?
Sent from my SPH-L710 using XDA Premium 4 mobile app

To be completely honest my UAG is much more comfortable to hold than my Neo Hybrid. The Neo Hybrid keeps it really slim but adds quite a bit of width to the phone. UAG looks bulkier than it really is in pictures, it's actually surprisingly slim and provides a lot of protection.
The small charging/headphone port on the Neo Hybrid can be frustrating at times but not a huge deal. I personally think the Neo Hybrid is a beautiful case but I find myself using the UAG as my daily.

R4NDR01D said:
Looks ugly. Don't get it. Not sure what everyone's fascination with this boring case is, it's mind boggling.
Click to expand...
Click to collapse
That doesn't look like the official neo hybrid. Yours is much too fat, so most likely a knock off. The one I have is much slimmer than that and almost fits flush with the camera on the back (directly from spigen). Even my knock off is slim like my real one. The frame on yours is way too thick also. And the mic hole on yours is too large
I do like my spigen Neo hybrid I have two official frames for it and one fake in green with another fake coming in blue. The things I don't like about the neo hybrid is the width it adds to your phone (makes it seem a little bulky) and the headphone jack is small, but I bought an adapter to make my shure se215 work with it. I hear the spigen slim armor case has a little better feel than the neo hybrid but I don't have any experience with it.

cases are totally subjective, and lmao that oneye or w/e it is is not much different than a Spigen, just bulkier which I don't want
sent from my Galaxy S4 using Tapatalk 4

Also, OP, if you are looking for a good case that is cheap Zoogue is having a sale over at tanga (https://www.tanga.com/deals/d284984d31/zoogue-galaxy-s4-social-case) for $2.99 and $1 shipping. It is a TPU case. I might be picking one up because I have only heard good things about them. Here is a video I found for the S4 (http://www.youtube.com/watch?v=TZo1SIyNeVU & http://www.youtube.com/watch?v=TSmcfnREiyM)

Spigen Slim Armor vs Neo Hybrid

Im a big fan of Spigen and like both their Slim Armor and Neo Hybrid cases, though paramount to me is which one has the smallest footprint, and adds the last amount of bulk to the height and width of the phone. Has anyone seen these cases side by side?

the slim armor is slimmer, but also offers less protection
sent from my Galaxy S4 using Tapatalk 4

I bought a neo hybrid case when i got my s4. it's made up of two pieces and can be a hassle to take off completely. I ended up sending it back because the button extender for the power button was on so tight that you couldn't tell when you were actuating the button anymore. The slightest tap would wake the phone. That's a big no no if you have it in a pocket. I got the ultra thin air case in rubberized black, and never looked back. I'm not one prone to dropping 700 dollar equipment, so it suits me just fine. Wicked cheap too. I recommend pairing any case you get with a steinheil ultra crystal screen protector as well. It gets greasy sometimes, but a nice microfiber cloth has it looking brand new again in a few strokes. Have had one on mine since i bought it months ago and still don't have a scratch on it.

I love my Neo Hybrid. Never had any issues with the buttons at all...

Happy with my Neo hybrid
Sent from my SGH-M919 using Tapatalk 4 Beta

Gunkk said:
Happy with my Neo hybrid
Sent from my SGH-M919 using Tapatalk 4 Beta
Click to expand...
Click to collapse
In some of the amazon reviews, I saw that people said that extended use of the neo hybrid case led to the volume and power buttons of the s4 becoming pushed into the phone so that once you took of the case it was very hard to push the buttons.
Has this happened to anyone else? After having used the neo hybrid for a while?

Not me.
Sent from my SGH-M919 using Tapatalk 4 Beta

If you're getting the neo hybrid, buy the one with the reinforced frame (only available on the Spigen website iirc). The frame around the USB port is too flimsy and can break easily if you're not careful.

My question is which has the least amount of bulk, im pretty spilt on either one in terms of style.

My Neo Hybrid broke on the bottom above the charging port from everyday use even when in a leather holster. So I got the Slim Armor View and I'm very happy with it. Everyone who sees it, wants one for their phone. But they are only for the S4 right now.

Caligula36 said:
My question is which has the least amount of bulk, im pretty spilt on either one in terms of style.
Click to expand...
Click to collapse
i am with you. Most case manufactures don't list the weight, which is very useful.
Sent from my SAMSUNG-SGH-I337 using xda app-developers app

I suggest you to buy Slim Armor View. It's the best option at all.
Wysłane z mojego GT-I9505 przy użyciu Tapatalk 4

I have a Neo Hybrid and its quite nice but looking at the reviews of the Slim Armor View, I wish I went with that instead lol (think I will switch soon enough , looks hot)

I got the neo hybrid for now. I might get the slim armor or UAG next
Sent from my Bonestock S4

how are the ports for the Slim Armor? because i had the Neo Hybrid but only the Samsung products fit. i was getting tired of always taking the phone off when i wanted to listen to music or charge the phone

ElZany said:
how are the ports for the Slim Armor? because i had the Neo Hybrid but only the Samsung products fit. i was getting tired of always taking the phone off when i wanted to listen to music or charge the phone
Click to expand...
Click to collapse
Thats the problem I was having. So I took the case off and stopped using it. Im about to just use my phone naked with just a screen protector
Sent from my Bonestock S4

I have the neo hybrid case and I dont have to take off the case to use my headphones. I have like 10 usb cables. Most of them fits fine without taking the case off
Sent from my Beastly powered S4 using Tapatalk 4

ElZany said:
how are the ports for the Slim Armor? because i had the Neo Hybrid but only the Samsung products fit. i was getting tired of always taking the phone off when i wanted to listen to music or charge the phone
Click to expand...
Click to collapse
My only issue with the Slim Armor ports is that the power port could be about half a mm bigger on each side. Its a very snug fit with some of the more bulky micro-USB connectors.
One very nice feature is that it has the terrestrial TV antenna port for the japanese S4, at least on the cases sold in Japan.

I think the fake neo hybrid cases actually have a larger charging hole.
Sent from my SPH-L720 using xda app-developers app

Is the Slim Armor made of aluminium? If not, are there any signal issues regardless.
Sent from my SPH-L720 using Tapatalk 4

What case are you all using if using one??

I typically swear by them, but this deduce feels so good in my hand, I'm having a hard time deciding whether or not to buy a case..
That as a screen protector. The glass is just silky..
On the other hand, a skin I am seriously considering..
Any and all discussions and inputs most welcome..
*also if your using a screen protector, which one and what type of material?
from note 7

https://www.tech21.com/en_us/evo-frame-case-for-samsung-galaxy-note7
have an otterbox defender on order so i got the t21 while i wait, i like it so far, slim and protective.

I have the tech21 one and will use it if I need better protection. I don't care for its ergonomics especially when it comes time to remove the S-Pen! It's too hard. The buttons require a lot of force to actuate too. And I question the deep wells around the microphone holes how they may affect sound quality when recording video...
I just got this today:
https://www.amazon.com/gp/product/B01GHVLU90/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
It's super thin and shiny and all. For $5.99 it's a no brainer if you are a member of the "barely there" crowd.
I don't know what Diztronic has against edge phones as there was no case for the S7E and probably the Note 7 as well. They are my favorite case for thinness. But for now this six dollar shiny plastic will do.
EDIT: Now I see Diztronic does have a Note 7 case! Looks to be backordered a week or two but I will be getting it.

ticholas said:
https://www.tech21.com/en_us/evo-frame-case-for-samsung-galaxy-note7
have an otterbox defender on order so i got the t21 while i wait, i like it so far, slim and protective.
Click to expand...
Click to collapse
Also ordered the defender! Hopefully you ordered from Amazon and saved yourself about 25 bucks. ?
I use this one for now. I like it alot actually.
Galaxy Note 7 Case, eSellerBox® Heavy Duty Armor Full-body Rugged Hybrid Dual Layer Slim Protective Defense Case Cover for Samsung Galaxy Note 7 (2016) (Black) https://www.amazon.com/dp/B01ITFWO6K/ref=cm_sw_r_em_apa_QtMVxbW93RHG2
Sent from my SM-N930V using Tapatalk

Cbass15 said:
Also ordered the defender! Hopefully you ordered from Amazon and saved yourself about 25 bucks.
Click to expand...
Click to collapse
Sho did, just wish it would ship already...:good:

I'm using this-
Galaxy Note 7 Case, Caseology [Skyfall Series] Transparent Clear Enhanced Grip [Black] [Slim Cushion] for Samsung Galaxy Note 7 (2016) https://www.amazon.com/dp/B01J8V0YHK/ref=cm_sw_r_cp_apa_ZrPVxbNYV615D
Excellent case.
Sent from my SM-N930V using Tapatalk

californiarailroader said:
I'm using this-
Galaxy Note 7 Case, Caseology [Skyfall Series] Transparent Clear Enhanced Grip [Black] [Slim Cushion] for Samsung Galaxy Note 7 (2016) https://www.amazon.com/dp/B01J8V0YHK/ref=cm_sw_r_cp_apa_ZrPVxbNYV615D
Excellent case.
Sent from my SM-N930V using Tapatalk
Click to expand...
Click to collapse
My wife has the Caseology Parallax series in the Mint color she loves it, a decently grippy case with the back being kinda soft with dimples. I've got the Spigen Neo Hybrid Gunmetal case, not as grippy as hers but still feels good. Pretty slim case though (doesn't add much bulk at all) and it fits like a glove. Got both off Amazon, for $14.99 and $15.99 I believe. Now I've just got to find us some screen protectors that won't peel on the edges. We got the Skinomi Techskin Full Coverage (case friendly) version 1 protectors and mine peeled like crazy and my wife's is on pretty good. Haven't heard much about the version 2 that just released, I'm hoping they fixed the issue. Anybody tried the version 2 Skinomi Techskin case friendly version with a case by chance?

Justinphxaz said:
My wife has the Caseology Parallax series in the Mint color she loves it, a decently grippy case with the back being kinda soft with dimples. I've got the Spigen Neo Hybrid Gunmetal case, not as grippy as hers but still feels good. Pretty slim case though (doesn't add much bulk at all) and it fits like a glove. Got both off Amazon, for $14.99 and $15.99 I believe. Now I've just got to find us some screen protectors that won't peel on the edges. We got the Skinomi Techskin Full Coverage (case friendly) version 1 protectors and mine peeled like crazy and my wife's is on pretty good. Haven't heard much about the version 2 that just released, I'm hoping they fixed the issue. Anybody tried the version 2 Skinomi Techskin case friendly version with a case by chance?
Click to expand...
Click to collapse
How would you know u have version 2?
Sent from my Galaxy Note7 using XDA Labs

borijess said:
How would you know u have version 2?
Sent from my Galaxy Note7 using XDA Labs
Click to expand...
Click to collapse
It specifically says "version 2" in the description when ordering on Amazon. My description does not include "version 2", as well as clearing it up with Skinomi, when asking for a warranty replacement due to this thing peeling. But ordering it directly from Skinomi or elsewhere, I'm not sure, I don't know if on the box it says revised version 2 or anything like that, as I haven't received it yet. Do you have the Skinomi Techskin too?

Here's the one I'm currently using
https://www.amazon.com/gp/product/B...bcb-5b0c-9b71-1298c43de85c&pf_rd_i=3081461011

Using this case.
https://www.amazon.com/gp/aw/cr/B01J274T9E/ref=mw_dp_cr
Sent from my Galaxy Note7 using XDA Labs

Otterbox Commuter. Love it.

Just got my Seidio Surface Case and Holster, it fits well. Only problem is when they have the cases in stock the holster is out of stock or vice versa.
https://www.seidioonline.com/device/galaxy-note-7/

UAG smoke version, got it from the AT&T store and I love it on my coral blue.
Sent from my SAMSUNG-SM-N930A using Tapatalk

im using spigen rugged black. no scren protector at front. planning to buy whole body screen protector..

Jfree3000 said:
UAG smoke version, got it from the AT&T store and I love it on my coral blue.
Click to expand...
Click to collapse
Does it work with screen protector?
Sent from my Galaxy Note7 using XDA Labs

i started out with a spigen neo hybrid. ordered that before i had received the phone. once i noticed i wasn't showing off the beautiful back glass of the phone i got the spigen neo hybrid crystal. both are lightweight and just what i need in a case

probablecauzdnb said:
i started out with a spigen neo hybrid. ordered that before i had received the phone. once i noticed i wasn't showing off the beautiful back glass of the phone i got the spigen neo hybrid crystal. both are lightweight and just what i need in a case
Click to expand...
Click to collapse
Also using the neo hybrid crystal and love it, shows off my silver note and offers decent protection without adding much thickness

borijess said:
Does it work with screen protector?
Sent from my Galaxy Note7 using XDA Labs
Click to expand...
Click to collapse
Haven't tried yet, applied a Skinomi before getting the case but the edges did not stay now I am waiting on a few tempered screen protectors to come in.

Spigen saved my Note 4 now it protects my Note 7
Spigen Tough Armor case (gunmetal to offset/match the Titanium model). it doesn't add much to the overall size of the phone and has a kickstand and really does protect the phone. Only $17 on Amazon.

Anyone have the Spigen [Ultra Hybrid S] Metal KickStand [Crystal Clear] ?

I can't seem to find anyone with this case. No reviews or actually picture of the case besides the advertisement images on Amazon.
https://www.amazon.com/Galaxy-Spige...d=1472076672&sr=8-3&keywords=note+7+kickstand
I have the VRS one but I find the bumper too thick so it makes it harder to handle the phone. Feels like I'm on my note 4 again. Trying to see if the Spigen is the same. Also I can't tell if the Spigens kickstand is just taped on the back or if it's actually sitting in a cutout hole on the back of the case.

I ordered one of the spigen kickstand cases but I haven't received it yet, they've been backordered according to there site, mine shipped today, so I'll check how they attached them, and reply with those results when I get my case.

I just got mine today. I think it's pretty thin. As for the kickstand, it's definitely glued on to the hard back and not dropped into a cut out. The stand is fairly flat, about as thick as 1.5 quarters. I don't feel it when holding the phone because my hand is a little bit cupped. The top and bottom of the case is raised a little so the screen doesnt touch the surfacce when laid face down. So far I like the case. For 11.99 shipped, i think its a great deal.

Thank you. That's what i was afraid of. The VRS kick stand is in a cutout so the stand is very low profile. But the bumper is thick. Probably a good 3mm all the way around. That is why im looking at the spigen one.

Here are some pictures of how the case looks like when it's on the phone. I also put a quarter side by side with the kickstand to show the thickness of it and a picture of how it looks when the phone is lying on its back.

Thanks for the pictures! Here is the VRS one.
Sent from my SM-N910T using Tapatalk

These guys make the best cases in my opinion ( their wireless charger is great too) and I went with the one with the built in card holder is 50% off:
https://www.amazon.com/gp/product/B01AUR1HF4/ref=s9_acsd_al_bw_c_x_4
Got it last Friday and already dropped my phone 10 times with no damage .........

https://www.amazon.com/gp/product/B...bcb-5b0c-9b71-1298c43de85c&pf_rd_i=3081461011
Got this one and it works very well.

jimwick said:
These guys make the best cases in my opinion ( their wireless charger is great too) and I went with the one with the built in card holder is 50% off:
https://www.amazon.com/gp/product/B01AUR1HF4/ref=s9_acsd_al_bw_c_x_4
Got it last Friday and already dropped my phone 10 times with no damage .........
Click to expand...
Click to collapse
I'm actually looking for a slimmer profile. But thank you for the input though.

RMXO said:
https://www.amazon.com/gp/product/B...bcb-5b0c-9b71-1298c43de85c&pf_rd_i=3081461011
Got this one and it works very well.
Click to expand...
Click to collapse
Thanks but a bit pricey. I think for now I will stick with my VRS. Looks like it's the best option for case with kickstand. Thanks everyone for all your input!

https://www.amazon.com/gp/product/B01GIUIBFQ/ref=oh_aui_detailpage_o04_s00?ie=UTF8&psc=1
https://www.amazon.com/Kickstand-Sp...7_1?ie=UTF8&psc=1&refRID=DRWR767P4VTDCKD1N3ZF
I ended up getting the Ultra hybrid case without the kickstand and adding the kickstand myself. On amazon, you are able to add the kickstand for free if you purchase the spigen case. It made it nice since I had the option where to place the kickstand. The case was 9.99 when i bought it w/prime shipping. The raised bump from the kickstand doesn't cause any issues with me and is actually nice to have when holding the phone I have found.

How do you add it to a 3rd parry case. Does not stick on? Is it removable / moveable?
Sent from my SAMSUNG-SM-N930A using XDA-Developers mobile app

LRGDNA said:
https://www.amazon.com/gp/product/B01GIUIBFQ/ref=oh_aui_detailpage_o04_s00?ie=UTF8&psc=1
https://www.amazon.com/Kickstand-Sp...7_1?ie=UTF8&psc=1&refRID=DRWR767P4VTDCKD1N3ZF
I ended up getting the Ultra hybrid case without the kickstand and adding the kickstand myself. On amazon, you are able to add the kickstand for free if you purchase the spigen case. It made it nice since I had the option where to place the kickstand. The case was 9.99 when i bought it w/prime shipping. The raised bump from the kickstand doesn't cause any issues with me and is actually nice to have when holding the phone I have found.
Click to expand...
Click to collapse
How did you do that? I prefer to add it myself too so I can put it higher. Don't want it to interfere with my wireless charger.
Update :
So I just add both to cart and when checking out it gave me $9.99 discount. Cool. Thanks for the tip!
Sent from my SM-N930T using Tapatalk

aznmode said:
How did you do that? I prefer to add it myself too so I can put it higher. Don't want it to interfere with my wireless charger.
Update :
So I just add both to cart and when checking out it gave me $9.99 discount. Cool. Thanks for the tip!
Sent from my SM-N930T using Tapatalk
Click to expand...
Click to collapse
No problem. Concerns about wireless charging and my car mount were the reasons I wanted to do it myself as well.
---------- Post added at 03:53 PM ---------- Previous post was at 03:49 PM ----------
ekerbuddyeker said:
How do you add it to a 3rd parry case. Does not stick on? Is it removable / moveable?
Sent from my SAMSUNG-SM-N930A using XDA-Developers mobile app
Click to expand...
Click to collapse
You can at it to a third party case or even the phone directly if you buy it separately on amazon or directly from spigen. It is not movable once mounted though so make sure you know where you want it before sticking it on.

LRGDNA said:
No problem. Concerns about wireless charging and my car mount were the reasons I wanted to do it myself as well.
---------- Post added at 03:53 PM ---------- Previous post was at 03:49 PM ----------
You can at it to a third party case or even the phone directly if you buy it separately on amazon or directly from spigen. It is not movable once mounted though so make sure you know where you want it before sticking it on.
Click to expand...
Click to collapse
I may mod the case and drill a hole for the kickstand so it will be more flushed. [emoji16]
Sent from my SM-N930T using Tapatalk

I got the Galaxy Note 7 Case, Spigen® [Crystal Hybrid] Metal Kickstand [Metal Slate] Clear TPU / PC Frame Slim Dual Layer Case for Samsung Galaxy Note 7 (2016) - 562CS20386
that actually has tje kickstand sitting in a cutout of the tpu back. I didnt want the metal scratching my n7 so I cut a little liner from the original back plastic and covered the kickstand on inside.

magisD said:
I got the Galaxy Note 7 Case, Spigen® [Crystal Hybrid] Metal Kickstand [Metal Slate] Clear TPU / PC Frame Slim Dual Layer Case for Samsung Galaxy Note 7 (2016) - 562CS20386
that actually has tje kickstand sitting in a cutout of the tpu back. I didnt want the metal scratching my n7 so I cut a little liner from the original back plastic and covered the kickstand on inside.
Click to expand...
Click to collapse
Pic? They must've redesigned it
Sent from my SM-N930T using Tapatalk

Sorry its on my phone with a wet apply screen protector and I'm not moving it, its not pushing up my case atm. But if you hit up spigens site or amazon.ca you can see it ... the kickstand is the thickest part.
I can't post links yet.
Also I must say the black case on silver looks awesome. The floating effect is nice plus I allready had black magnetic plates for my car mount and they match the case .

magisD said:
Sorry its on my phone with a wet apply screen protector and I'm not moving it, its not pushing up my case atm. But if you hit up spigens site or amazon.ca you can see it ... the kickstand is the thickest part.
I can't post links yet.
Also I must say the black case on silver looks awesome. The floating effect is nice plus I allready had black magnetic plates for my car mount and they match the case .
Click to expand...
Click to collapse
Haha I hear ya. No worries. I dread it everytime I take of my case to try new ones I've bought. I'm gonna need to use my 2nd pair of screen protector soon cause of this. But I will check spigen site instead. Thank you.
Sent from my SM-N930T using Tapatalk

LRGDNA said:
https://www.amazon.com/gp/product/B01GIUIBFQ/ref=oh_aui_detailpage_o04_s00?ie=UTF8&psc=1
https://www.amazon.com/Kickstand-Sp...7_1?ie=UTF8&psc=1&refRID=DRWR767P4VTDCKD1N3ZF
I ended up getting the Ultra hybrid case without the kickstand and adding the kickstand myself. On amazon, you are able to add the kickstand for free if you purchase the spigen case. It made it nice since I had the option where to place the kickstand. The case was 9.99 when i bought it w/prime shipping. The raised bump from the kickstand doesn't cause any issues with me and is actually nice to have when holding the phone I have found.
Click to expand...
Click to collapse
Got the spigen and separate kickstand but I did not like the spigen case as the sides tapered into a point at the center. See attached image. So this makes it a bit weird to hold since it isn't flat or rounded off.
So I ended up buying the ringke fusion. Much better case. And I have cut a hole in it for the spigen kickstand. Having the kickstand at the center is much better. I can tap on the top left or right corners and does not tip over. Unlike the VRS with the kickstand on the bottom. My mod is more flushed so it doesn't interfere with the fast wireless charger.
Here's a close up of the ringke. No sharp edge.
Here is my mod which I need to redo as my dremmel slipped and scratched the case.
Sent from my SM-N930T using Tapatalk