Dear Folks!
I'm using QMobile A10 (which is variant of Micromax Canvas A110). I've been jumping form one rom to another form a week but not being satisfied very much. May be it is due to kernal issue because problems with rotation, USB-OTG and auto brightness (and sometime battery issue). I think that it is due to Kernal.
As XDA announced new rules regarding Kernal, so devs are offering roms without Kernals (boot img). And devs mostly say that add boot img from stock rom or any of your choice. I am not any dev but I've feelings that every kernal is not compatible to every rom.
So all I want to ask that kindly tell me that which boot image is better with what rom so that I may enjoy my A10 experience too.
Looking forward and thanking you.
---
Dr Faryal Saeed Abdal
Faisalabad, Pakistan
Dear Friends!
Kindly guide.
bro all the development done with stock jb or cayns t2 rom... so.... stock boot.img is more suggested by the all devs....
DISCLAIMER : DO WITH YOUR OWN RISK ( All Credit Goes to Original ROM Make NOT ME )
MT6577 to be more and more Popular, VARIOUS BRANDs have been released by VARIOUS VENDORs all over the world. Most of them are Clone Phone version of Big International Brand. From the little research, I have found that Zyrex OneScribe ZA-985 is IDENTIC DEVICE with KATA - i1.
ZA-985 sold in Indonesia Only and KATA i1 supposed sold in Phillipine only. Rooting method for MT6577 proved valid for almost ALL BRANDS based on MT6577 but NOT EVERY ROM SAFE TO EXCHANGE AMONG MT6577 DEVICES.
Please Check if you have :
MT6577 based device, 1 Ghz Dual Core CPU, 1 GB RAM, PowerVR SGX531 GPU, 4.5-inch qHD (960×540) IPS display (245ppi), Dual GSM Sim Feature, Physically has THREE "Hardware Button", 8 MP Rear Camera, 1.3 MP Front Camera, MT6566 Wifi chipset. I believed you have identic device with Zyrex OneScribe ZA-985 and KATA-i1 and safely flash below 4.1.2 JB ROM.
Prepare Your Device
If your device is in stock ROM, Gain Root and Back Up stock rom for revival matters, follow THIS GUIDE or any available Guides on the NET. Build your own CWR or TWRP by following THIS GUDE, Flash built CWR / TWRP into your device, follow THIS GUIDE
DOWNLOAD JB 4.1.2 ZA985 FOR MT6577 BASED DEVICE
MIRROR GOOGLE DRIVE
Flash via CWR / TWRP ... enjoy !!
ABOUT THE ROM
Jelly bean 4.1.2
Beautiful Emotion-UI with great Transitions
deodexed
This ROM Known safe to flash into:
Zyrex OneScribe ZA-985
KATA - i1
PLS CHECK FOR HUAWEI ASCEND U8836D / G 500
I have tested by FLASHING ROM FOR ZTE V970 from THIS THREAD to ZA-985 Zyrex OneScribe. with Default (in the rom) boot.img ZA 985 booting properly but facing random reboot. By Changing the boot.img with boot.img in above rom. Device booting properly, operable gsm, wifi, bluetooth, data connections ALL WORK but Camera NOT WORK[. ZTE V970 is more popular device than ZA 985, thus to port ZATE V970 rom to ZA 985 will be easier. I will do it once I have time NO ETA
Click to expand...
Click to collapse
Jelly Bean 4.1.1 for ZA 985 ported from ZTE V970
Jelly Bean 4.1.2 for ZA 985 ported from Acer liquid E-1
I've been using the ported ZTE V970 JB ROM to my Kata i1. It works fine except the front camera which is just on VGA (should be 1.3MP) and the temperature sensor which doesn't work. Those that are not working is not really a big deal. But if you guys can help me on making it work then it would be appreciated. Thanks!
verntechguy said:
I've been using the ported ZTE V970 JB ROM to my Kata i1. It works fine except the front camera which is just on VGA (should be 1.3MP) and the temperature sensor which doesn't work. Those that are not working is not really a big deal. But if you guys can help me on making it work then it would be appreciated. Thanks!
Click to expand...
Click to collapse
I think the rom is rooted. Please try to replace the file in /system/lib/hw/camera.default.so with one on your device with similar android version of ROM. If you don't have one ... try with ICS libs. Push via adb
Will try the camera tomorrow. How about the battery temperature sensor? What file do I need to get? Thanks!
Sent from my Kata i1 using Tapatalk 4 Beta
verntechguy said:
Will try the camera tomorrow. How about the battery temperature sensor? What file do I need to get? Thanks!
Sent from my Kata i1 using Tapatalk 4 Beta
Click to expand...
Click to collapse
I'm not so sure, but I think there is /system/lib/hw/sensors.default.so ... this sensor AFAIK, is to control Soc Cemera . This probably also responsible for battery temperature sensor. in file also exist power.default.so we need to search info for their details jobs I have MTK6577 data sheet. I will take a look once I have time and come back
Both battery temperature doesn't work using ZA985 and V970 JB ROM on Kata i1. Tried copying the gps libraries from V970 to ZA985 but they use different modules. V970 uses mt6628 which is compatible with i1 while ZA985 uses mt6620. Using the i1 ICS libraries for camera and sensor won't work on the V970 ROM as it will be stuck on boot animation.
Sent from my Kata i1 using Tapatalk 4 Beta
verntechguy said:
Both battery temperature doesn't work using ZA985 and V970 JB ROM on Kata i1. Tried copying the gps libraries from V970 to ZA985 but they use different modules. V970 uses mt6628 which is compatible with i1 while ZA985 uses mt6620. Using the i1 ICS libraries for camera and sensor won't work on the V970 ROM as it will be stuck on boot animation.
Sent from my Kata i1 using Tapatalk 4 Beta
Click to expand...
Click to collapse
Camera :I think u need /system/lib/libcamera.so and /system/lib/liboemcamera.so from original device, since this is proprietary and device specific.
ZA-985 itself Not available yet a custom rom. I was ported from Kata -i1...
If the JB ROM for ZA985 was ported from Kata i1, why is it that the front cam is only VGA wherein it should be 1.3mp and the battery temperature doesn't work. And as far as I know there's no official JB ROM for Kata i1 yet so that custom ROM is ported from another but not Kata i1.
Sent from my Kata i1 using Tapatalk 4 Beta
verntechguy said:
If the JB ROM for ZA985 was ported from Kata i1, why is it that the front cam is only VGA wherein it should be 1.3mp and the battery temperature doesn't work. And as far as I know there's no official JB ROM for Kata i1 yet so that custom ROM is ported from another but not Kata i1.
Sent from my Kata i1 using Tapatalk 4 Beta
Click to expand...
Click to collapse
Kata - i1 has JB Custom ROM, I got from Piliphino Guys ...but I forgot the forums. Just search. if you can NOT find. I will upload for you. But it is NOT MY ROM ... someone named YON or something. Please drop message here. I will upload and let you know the links. After you downloading, I should delete I think. Unless the rom maker give permissions.
I believe those were ported ROMs but not official. There's no official JB ROM yet announced. I think it would be better if you message me the links instead of posting here. Thanks!
Sent from my Kata i1 using Tapatalk 4 Beta
I was able to download and flash the yonip custom rom for i1. However the gps works there but not on your ported rom to ZA985. Everything seems the same with the V970 ported rom but I feel the V970 is much smoother in terms of performance.
Sent from my Kata i1 using Tapatalk 4 Beta
I think u need to use library from your phone and flash via adb.
Sent from my Nexus 4 using XDA Premium 4 mobile app
This saves my cell phone. Thank you.
I need some help for free more RAM in my MT11i with unlocked bootloader.
Now i have installed a slimbean rom 4.2.2, and with some apps installed (like facebook, whatsapp, etc) it's only have about 40-50 MB of free RAM.
Is the swap cache a solution for this problem? i´m thinking to try another Rom, like super jelly bean to compare RAM management.
Anyone can give me another solutions?
Many thanks!
bye
SJB 6.5 gives me 240-250 of free RAM
Sent from my Xperia Neo V
Hey guys, just rooted my Canvas 2 A110. I am running JB 4.1.1 and Im searching for a new ROM that will boost my phone performance as it has become very slow and laggy despite removing most apps and refreshing the RAM often. Can you recommend some ROMS and apps that will improve my phone performance? Im also looking for a nice UI/theme and tutorials to accomplish these things. Thank you.
Also why are all the good ROMs for 4.2.2? How can I upgrade my phone from 4.1.1 to 4.2.2?
Cyclonedx said:
Hey guys, just rooted my Canvas 2 A110. I am running JB 4.1.1 and Im searching for a new ROM that will boost my phone performance as it has become very slow and laggy despite removing most apps and refreshing the RAM often. Can you recommend some ROMS and apps that will improve my phone performance? Im also looking for a nice UI/theme and tutorials to accomplish these things. Thank you.
Also why are all the good ROMs for 4.2.2? How can I upgrade my phone from 4.1.1 to 4.2.2?
Click to expand...
Click to collapse
you're on 4.1, so if you wanna use 4.2.x roms, you'll have to flash a 4.2.x kernel and then the desired 4.2.x rom. bindassboost kernel would do. for lag free ui, you could use the ultimatenexus or rivals or mere rom (there are much more lag free roms)
and for android L themed UI, you could use kitkatian v3 or skykisser.
there are roms like miui, vibe, zener where you'll get different ui. :good:
wow
Hj
Use phoenix 4 awesome rom
Sent from my A110 using Tapatalk 2
for any other android phones pleanty of custom roms avalible pls some one take trouble to build custom rom for galaxy core 2 pls i beg u guys
Hi, thank you for using XDA Assist. Unfortunately there is very little development for the Core 2. You could try looking through here, http://forum.xda-developers.com/galaxy-core/general I did find one stockish custome rom for the Core 2.
can we get cyonegen 12 roms sir iit will be gd for all core 2 users tnx
Thread closed.