As the title states, I have my skyrocket with cm10 and mms is not working. I'm using the pta apn that's included. I searched via Google to see if there were any mistakes with the apn settings and didn't see anything... Any suggestions??? It acknowledges that an mms was sent to me but will never download it.
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
Assuming you're on att that apn us fine. Did you do a clean flash of the CM? And also do you have the auto retrieve enabled in your sms settings?
I'm sure you've messed with it enough and it still didn't work so I recommend a clean reflash if the latest CM with the latest UCMC1 radio and you should be fine
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
Do u have droidwall installed? Or any other app that allows modifications of IP tables or perhaps permissions?
oh man...I am seriously having the same issue here...
Rom: SlimBean 4.2.2.build.6-official
Kernel: 3.0.72+Marla-2.0.7+
Modem: i727UCMC1
So I've gone through multiple iterations of Beanstalk and Slim, and not yet have I been able to get MMS working...I've Odin'd clean and installed from scratch, redownloaded the roms to make sure I got a solid DL, tried various APN settings, and none of it seems to work. Going to try and odin to stock, and flash tomorrow, but I get the feeling it's not going to work...
in the instances that I have not odin'd to stock, I have wiped the appropriate cache, and formatted and reset...still to no avail
any suggestions? this is really starting to drive me crazy...and I feel like I'm the only one. Every stinkin thread I read says it's a bad dl, try again. Done that more times than I can count and still nothing...
pyrplhaze said:
oh man...I am seriously having the same issue here...
Rom: SlimBean 4.2.2.build.6-official
Kernel: 3.0.72+Marla-2.0.7+
Modem: i727UCMC1
So I've gone through multiple iterations of Beanstalk and Slim, and not yet have I been able to get MMS working...I've Odin'd clean and installed from scratch, redownloaded the roms to make sure I got a solid DL, tried various APN settings, and none of it seems to work. Going to try and odin to stock, and flash tomorrow, but I get the feeling it's not going to work...
in the instances that I have not odin'd to stock, I have wiped the appropriate cache, and formatted and reset...still to no avail
any suggestions? this is really starting to drive me crazy...and I feel like I'm the only one. Every stinkin thread I read says it's a bad dl, try again. Done that more times than I can count and still nothing...
Click to expand...
Click to collapse
I see no mention of you checking the md5 or making sure your apn is correct.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 4 Beta
APN s have been messed with, and I've tried various ones. Found them somewhere here on xda, and verified that my phone reflects them. **edit...my phone reflects the correct art apns....not some random stuff I found...just wanted to clarify
Md5 is another thing though....I've never checked them before, and due to that, I havent clue how to verify md5. I'll do some reading and see. I can tell you that when I flash it will say "no md5 found, skipping verification" or something to that effect. I presume this could be the issue?
Thanks!
That just means you have md5 verification turned off, it doesn't affect anything. You need to check the md5 yourself before you flash the files on your phone. If they don't match the files are incomplete or corrupted.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 4 Beta
Thanks. I've downloaded a Checksum utility from CNET, and redownloading the rom right now. Will also re-download modem and verify as well. I noticed on the CM site that UCLI3 is now the recommended modem, so I'll go ahead and change to that instead of using UCMC1.
I plan on flashing to stock, and going all the way through it, just to ensure everything is cleared out this time, instead of just wiping/formatting via TWRP this time around.
Appreciate your help. Will report back any issues.
Thanks.
pyrplhaze said:
Thanks. I've downloaded a Checksum utility from CNET, and redownloading the rom right now. Will also re-download modem and verify as well. I noticed on the CM site that UCLI3 is now the recommended modem, so I'll go ahead and change to that instead of using UCMC1.
I plan on flashing to stock, and going all the way through it, just to ensure everything is cleared out this time, instead of just wiping/formatting via TWRP this time around.
Appreciate your help. Will report back any issues.
Thanks.
Click to expand...
Click to collapse
That is outdated, you want to use ucmc1 radio.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 4 Beta
Thanks for confirming. Just finished re-downloading everything, and that modem link on the CM site was kinda odd, so I decided to stick with UCMC1. I literally just finished all my downloads, and now am going to begin the stock-recovery-modem-rom flashing process. Hoping to be able to report back success within the next hour! All md5/sha hashes checked out, so here's hoping!!
Thanks for your help through all of this.
---------- Post added at 12:30 PM ---------- Previous post was at 12:08 PM ----------
OK! flashed to stock successfully, and was able to send MMS via stock rom...now onto the fun stuff...
---------- Post added at 12:58 PM ---------- Previous post was at 12:30 PM ----------
RIGHT ON!
I have no idea where the issue was in my prior process (likely MD5 checking, because that's the only thing I did differently) but we are up and running now.
Totally appreciate your help through all of this...now I shall crawl back into my hole, and likely not return til I get another phone, and a whole new set of problems
THANKS!!!!!!
pyrplhaze said:
Thanks for confirming. Just finished re-downloading everything, and that modem link on the CM site was kinda odd, so I decided to stick with UCMC1. I literally just finished all my downloads, and now am going to begin the stock-recovery-modem-rom flashing process. Hoping to be able to report back success within the next hour! All md5/sha hashes checked out, so here's hoping!!
Thanks for your help through all of this.
---------- Post added at 12:30 PM ---------- Previous post was at 12:08 PM ----------
OK! flashed to stock successfully, and was able to send MMS via stock rom...now onto the fun stuff...
---------- Post added at 12:58 PM ---------- Previous post was at 12:30 PM ----------
RIGHT ON!
I have no idea where the issue was in my prior process (likely MD5 checking, because that's the only thing I did differently) but we are up and running now.
Totally appreciate your help through all of this...now I shall crawl back into my hole, and likely not return til I get another phone, and a whole new set of problems
THANKS!!!!!!
Click to expand...
Click to collapse
Haha, glad you got it all done. Enjoy!
Sent from my SAMSUNG-SGH-I727 using Tapatalk 4 Beta
just wanted to update this, in case anyone else experiences this issue....
I installed a few extras (an addon package, and cLock, and a few other things off the Slim Roms site) and all of a sudden I wasn't able to send MMS again. No idea what did it, because I didn't check before installing each .zip package, just installed them all at once.
I presumed everything was good, then tried to send an MMS that evening. Didn't work. AHHH! SO FRUSTRATING!
Decided to charge it up all the way and prepare to reflash everything. UGH. Not again. This **** is getting old.
So I thought, well, let's just do a full wipe, and see what that does. So I went into TWRP, did the "full wipe" option that wipes cache, dalvik cache, .android_secure, and Factory Reset. Figured if it borked everything, I'd just start from square 1. Got nothing to lose, right?
Well, it worked. Did that reset, and phone booted up. Once everything was up, I tried to send MMS, and success! Haven't had a single issue since then.
Thanks.
I've noticed that if I'm using a thrifty party messaging app my mms won't send but using the stock app it sends with no problem...
Sent from my AT&T Samsung Skyrocket on Tapatalk 2
Related
Ok Ill try to make this as clear as I can. I don't know what I'm doing and thought I would mess around with my Samsung Mesmerize for USCC.
USCC released the gingerbread update for my phone. So I went on their site and downloaded the installer and installed it on my phone. Before I was on froyo and was rooted with the vodoo lagfix. I did NOT disable or unroot before I did it.
Gingerbread update went fine and phone was working properly. I wanted to use my titanium backup to restore all of my apps but it said I wasnt rooted. I figured all I had to do was use superonelickroot and be back to square one. Problem is it wouldnt work.
This is where I really screwed up. I browsed around and found that I need to root it different because gingerbread is different and wont work with superoneclickroot.
I found a link to upgrade the samsung galaxy 19000 by using odin and replace some files.
This is where I really screwed up. I flashed my rom and installed the .tar file not realizing that it wasnt for my phone........
SIGH>..........
Phone wouldnt go past samsung screen which was all discolored and weird.
After panicing for awhile I figured I need to use odin again and flash an original rom back. So I found an original USCC froyo 2.2 rom and reflashed it to my phone.
Now my phone at least loads but I'm having a slew of problems. My internal memory storage is at 0 so I cant install anything. I also keep getting force close loop from twlauncher. I got that to go away by removing all of the widgets on my phone.
I have NO clue what the hell I'm doing and I'm afraid I screw this phone up.
I've tried hard resetting and when I do it, it says all sorts of failures and crap in red in the boot screen. It will reload eventually and the phone otherwise seems to be fine.
The problem is I can install like 2 apps and that's it before it says there in insufficient memory.
All I want to do is get my phone working like normal again.
What did I do wrong, other then the obvious installing the wrong rom for my phone?
I thought by reflashing with an original rom things would be back to normal, apparently not.
I would appreciate any help or info.
I'm not a complete noob but will need some laymen terms.
Thanks !
---------- Post added at 04:59 PM ---------- Previous post was at 04:59 PM ----------
Update:
I restarted my phone just to see what happens and it reloaded like normal except it didn't save alot of my setting I changed.
So the phone is truly acting like it has no system memory. My wallpaper was back to the original one that comes with the phone and other settings were turned back to the original settings.
What will happen if I "clear cache partition" from the boot menu?
Will this help my problem at all?
Does anyone have any suggestions, I know someone out there knows whats wrong.
PLEASE HELP !!!
---------- Post added at 03:56 PM ---------- Previous post was at 03:50 PM ----------
Update:
Ok, It also lost the one app that I was able to install, friendcasterpro.
So my phone is acting like it has no internal memory.
Why is this happening and how do I fix it?
THANKS !!!!
Same thing happened to me. Look up rfs formatter for the fascinate. After flashing it through recovery, flash your rom after while still in recovery. I had the same problem, this seemed to fix it for me on froyo.There may be other ways to fix though. Here's a link for it http://db.tt/JRseDsT. Don't know to much about odin anyone who does feel free to chime in.
Sent from my SCH-I500 using xda premium
So, I know this post is REALLY old, but would you happen to still have a copy of the 2.2 ROM? I can't find it anywhere.
RE: Process system is not responding
Anybody else ever run into this problem. I restart my phone and process system doesn't work right away. it takes sometimes 5 or 6 reboot attempts before the phone process system runs.
I'm not rooted regular stock.
Sent from my SAMSUNG-SGH-I727 using xda premium
I'm sorry your question makes no sense try explaining a different way
I would suggest rooting and flashing another rom. Sounds to me like something got corrupted.
Sent via smoke signal
yep same problem here. i tried all the answers i found online. havent came up with one that worked yet. not the rom because i just flashed a new one and same problem.
---------- Post added at 10:02 AM ---------- Previous post was at 09:39 AM ----------
alright i fixed it on my phone. i did a full wipe. tell me if i need to explain how to do this. reflashed the ROM and gapps. when i went through the setup the first time there was an option to restore from google. it was checked by default. i left it checked. same problem... system process not responding... wiped and started over and reflashed ROM and gapps. unchecked restore google and it didnt come back. phone hasnt crashed since. the problem lies within the wifi passwords restore. the problem started when i was trying to start wifi. i dont know where to report the bug or i would. good luck and any questions? just quote this so i get an email and ill try to explain if this didnt make sense. hope it helped. if it did consider buying my buddy a beer who is a dev and needs a new computer. http://johntriger-development.yolasite.com/
Newbe to vzw Samsung Galaxy s3.... I kind of enjoyed the TouchWiz features in the vzw store. Can someone point me in the right direction for a touchwiz rom with root where I can use the hand swipe to do a screen snapshot, etc, etc?
Currently I have a aopk rom on my phone that someone else loaded on it. Unless I am missing something, it doesn't seem to have touchwiz.
Can someone help a fellow out?
Thanks in advance.
I like this one. It has everything you asked for and it's cleaned of the bloat.
http://forum.xda-developers.com/showthread.php?t=1832070
http://forum.xda-developers.com/showthread.php?p=30640131
Link above will list pretty much all ROMs and kernel available.
You can test and see what you prefer.
Stable rms I have tested: cleanrom as stated above ans synergy.
....but just flash different ones and see what you like. That's part of the fun!
Sent from a SYNERGIZED GalaxySIII
Thanks for the replies... I see Clean and Synergy. I currently have Synergy on my TB. Right now on my s3, it came to me preloaded with AOPK. But that doesn't have TouchWiz. Which version of Synergy would be considered the most stable? It's hard for me to tell which versions are which. I did see someone post something about a version 1.7, but for the life of me I don't see that.
R73 is the most current 4.0 build. It's fan-friggen-tastic! 4.1 jb build us just beginning, so wouldn't recommend that one for you. Click the current build link and it will list all recent versions.
Throw on a Trinity kernel and a little dark horse rises theme, and love life for the great moment in time your in...
Sent from my SCH-I535 using xda premium
Thanks, I found Synergy R73. Now I am waiting on it to finish booting up. I am sitting on the 'Synergy ROM' boot animation, and it has been on that for at least 5 minutes. I think something went afoul here. Hmmmm.
Nope, takes a bit first time
Sent from my SCH-I535 using xda premium
Ok, I will let it go for a while longer. I hope this takes *wow*.... heh... I can't help but be a little nervous because it seems like it is taking forever. Wish there was a percentage bar or something... lol...
It's still going.... so all in all so far it has been 25 minutes.... I think this is taking too long- don't you think?
That's long, your bootloader is unlocked correct?
Sent from my SCH-I535 using xda premium
---------- Post added at 11:51 PM ---------- Previous post was at 11:47 PM ----------
Describe in as much detail as possible all actions taken after you got your device and decided to change the rom..
Sent from my SCH-I535 using xda premium
Yes unlocked. Tried a few battery pulls but no go. Then tried to go into recovery. Now it is telling me "Downloading... Do not turn off target!"
Your in download not recovery mode. Hold power button down, it should shut off after 20 seconds give or take. Then power, home, up (not down) for recovery
Sent from my SCH-I535 using xda premium
Device came preloaded with AOPK. I have not activated it yet. It's to replace my HTC Thunderbolt. I was wanting to put on a TouchWiz rom and load that first before trying to activate. Then once activated, I was going to get all my apps back from the market, etc.
I downloaded Synergy 1.7 from the download area. I copied it to a UTILITIES folder on the internal card. I did a MD5 checksum prior to installing Synergy and the checksum was perfect.
I then went to install zip from internal sd. I navigated to the UTILITIES folder, and selected the Synergy zip file. It then did some processing for a few minutes and told me it was done.
It was at that time I rebooted the device, and from there it sat on that Synergy boot animation.
I then tried several battery pulls after it was at the boot animation for 30 minutes or so. But they all just sat at the boot animation. Finally I attempted to get into recovery mode. I am not sure if I selected the proper keys, but used Power button, Home button, and Volume down button.
That's how I ended up where I am now.
Sorry I didn't see your message until just now. I will try again and report back in just a sec.
Did you make a backup before the flash? Did you wipe data before the flash? Have you been able to get into recovery as I mentioned above?
Ok, it took a few times, but I am now in Recovery. Should I do a "wipe data/factory reset"?
annoyingduck said:
Did you make a backup before the flash? Did you wipe data before the flash? Have you been able to get into recovery as I mentioned above?
Click to expand...
Click to collapse
Yes I made a backup of aopk before the flash.
No I did not wipe data before the flash.
Yes, I am now in recovery mode using the steps you outlined
Ok good, you were just on sh*t street, but not on F'd lane! Yes wipe data, wipe cache, go to advanced wipe dalvik. Then reflash the synergy rom. This should work fine. bootup will be anywhere from 5 to 10 min
---------- Post added at 12:25 AM ---------- Previous post was at 12:24 AM ----------
wipe data twice to be sure
annoyingduck said:
Ok good, you were just on sh*t street, but not on F'd lane! Yes wipe data, wipe cache, go to advanced wipe dalvik. Then reflash the synergy rom. This should work fine. bootup will be anywhere from 5 to 10 min
---------- Post added at 12:25 AM ---------- Previous post was at 12:24 AM ----------
wipe data twice to be sure
Click to expand...
Click to collapse
*Whew*
I wiped data, cache, and dalvik. I did that 3 times on each one to be sure...
Now I am attempting to install Synergy again.
Will post back in a few mins.
Also, annoyingduck, thanks for all of your assistance and getting me out of that bad situation. Hopefully this time things will go smoothly.
- Update - it just finished installing. Now it is starting to boot up. I now have the boot animation screen and it is 29mins after the hour. I am watching the clock.... *keeping fingers crossed*
Ok, that's done. I don't currently have a sim card inserted into the device. I wonder if I can use the one from my TB? Or should I use the one that came with the phone?
Along time ago I made the mistake of wiping cache, dalvik and flashing a kernel without resetting wallet. I figured I wasn't wiping data so I was good (just lazy.) I did make a backup with working wallet.
Now my Nfc will work (I've transfered songs and pics through s beam) but it sometimes greys out and won't stay on. It works than stops, reboot does not change it. If I get it back before I go to bed when I wake up its broke again.
I'm currently on Clean Rom ULE not that I think that's the problem.
Sent from my SCH-I535 using xda premium
make nandroid, flash stock rom, tick on NFC, restore nandroid
win. worked for me everytime.
why are you resettin wallet ever? Ive swtiched between 10ish roms and ive never reset anything. it works everytime no issues
Do you get a box that says "unfortunately nfc has stopped"? I used to get that and finally fixed it by flashing back to the stock rom and restoring data from my old rom so I didn't lose anything. Fixed the problem for me and didn't lose any apps or how my home screen was set up.
ddurandSGS3 said:
make nandroid, flash stock rom, tick on NFC, restore nandroid
win. worked for me everytime.
why are you resettin wallet ever? Ive swtiched between 10ish roms and ive never reset anything. it works everytime no issues
Click to expand...
Click to collapse
That's what I do and it will work. Than the next day its greyed out again When its on I've successfully transferred files before it greys out again. So I know its not completely borked. Just frustrating.
Sent from my SCH-I535 using xda premium
maybe it has something to do with resetting wallet. ive never done that. never read that you had to do that.
---------- Post added at 05:35 PM ---------- Previous post was at 05:33 PM ----------
if youre flashing a JBTW leak instead of an ICS rom maybe that has something to do with it. are you doing TWJB leak instead of ics? ive always done ICS
Please read forum rules before posting
Questions go in Q&A
Thread moved
Thank you for your cooperation
Friendly Neighborhood Moderator
kennyglass123 said:
Please read forum rules before posting
Questions go in Q&A
Thread moved
Thank you for your cooperation
Friendly Neighborhood Moderator
Click to expand...
Click to collapse
Sorry bout that..I just restored stock nandroid with Nfc on now it's greyed out again. I Odined stock rooted yesterday hoping that would help but wondering if I should try to Odin straight stock with a data wipe.
Really just wondering if anyone else is experiencing this.
Sent from my SCH-I535 using xda premium
you need to check NFC on when you flash teh stock rom, did you do that?
after that, not sure what to tell you. fixed NFC multiple times doing that method on a fwe different GS3s.
ddurandSGS3 said:
you need to check NFC on when you flash teh stock rom, did you do that?
after that, not sure what to tell you. fixed NFC multiple times doing that method on a fwe different GS3s.
Click to expand...
Click to collapse
Ya it works than stops. I know what your saying just like on aosp. Flash stock click it on flash again. I don't know. I remember reading about how the "secure element" in the Nfc chip could lock up but if that's the case how have I used it at all? Anyway I appreciate the help. I've had enough for the moment.
Sent from my SCH-I535 using xda premium
I was using Twrp file manager in recovery and noticed the NFC Apk. Had the VRLF stock radio after it. So I flashed back from the new blk jb leak. That seems to have fixed it. I tried to take a screenshot of the apk in root explorer but it doesn't list the baseband after the apk. like it did in twrp. Maybe I'm crazy as I'm sure one has nothing to do with the other but why was it listed like that in twrp file manager?
Edit it wasn't twrp it was settings/apps
Sent from my SCH-I535 using xda premium
Hmm some error about tapatalk sever uploading photo damn xda premium.
I tried to install the latest and greatest version of cyanogenmod this morning but once it got to the activating part, it would not activate. I tried it a couple times, rebooted, wiped, installed and tried again, but nothing was working.
So, I had enough and wiped everything and restored my previous ROM's backup (CleanROM).
But now, even CleanROM can't connect to the mobile network. When I try to do the *228 thing, I first got an error something about a invalid SIM card. So, I rebooted and now the error message says "A Verizon Wireless SIM card has activated your service and updated your phone's roaming capabilities".
What's weird about that is that it doesn't even call, just pops up that message and I still have no network!
Could it be possible that have the wrong radio now? Anyone know what it's supposed to be and where to download the correct one?
Right now: I535VRLG7
What the f happened? What did cyanogenmod do to my phone??? Please help, my phone is dead in the water at this point.
Was it 10.1.0.1? I tried flashing it myself and data would not work either, first time ever happened to me since running CM. Apparently others are having issues with it as well reading the thread on the dev section. I restored my backup of 10.1.0 and it was fine again thankfully. Also you aren't supposed to *228 on a 4G phone, might want to do a search but others have said that can mess up your phone as well.
NeoMagus said:
Was it 10.1.0.1? I tried flashing it myself and data would not work either, first time ever happened to me since running CM. Apparently others are having issues with it as well reading the thread on the dev section. I restored my backup of 10.1.0 and it was fine again thankfully. Also you aren't supposed to *228 on a 4G phone, might want to do a search but others have said that can mess up your phone as well.
Click to expand...
Click to collapse
Yes, that's the version I was trying to install.
I created a backup of CleanROM that I was running before flashing, but that's not working now either. Network is dead for me.
I am having the exact same issue. Flashed the newest "stable" build of CM 10 and now the phone won't activate. Flashed CM10 RC5 and phone won't activate. Installed my backup I made before I flashed and it will not make/receive calls either. I tried searching the g+ community but did not see anything.:crying:
Jerniganc said:
I am having the exact same issue. Flashed the newest "stable" build of CM 10 and now the phone won't activate. Flashed CM10 RC5 and phone won't activate. Installed my backup I made before I flashed and it will not make/receive calls either. I tried searching the g+ community but did not see anything.:crying:
Click to expand...
Click to collapse
I've tried a bunch of stuff so far, but no luck fixing this. I'm waiting for some files to copy and I'm going to try again. This sucks. I'll post if I have any luck with a fix.
I'm having the same issue. What Baseband are you guys running?
Laxidasical said:
I'm having the same issue. What Baseband are you guys running?
Click to expand...
Click to collapse
I'm on I535VRBMB1, but I was on I535VRLG7 for some reason. Upgrading did not help.
Welp, going to have to Odin back to stock. Nothing has worked. It's dead. Time to bring it to stock and have Verizon fix or replace it. Thanks cyanogenmod!
I hope I don't have to do that also. I posted in the cm g+ community and I'm waiting on an answer atm. Jumped in irc chat but got no help.
Sent from my Nexus 7 using xda premium
---------- Post added at 06:48 PM ---------- Previous post was at 06:36 PM ----------
ned4spd8874 said:
I've tried a bunch of stuff so far, but no luck fixing this. I'm waiting for some files to copy and I'm going to try again. This sucks. I'll post if I have any luck with a fix.
Click to expand...
Click to collapse
ned4spd8874 said:
Welp, going to have to Odin back to stock. Nothing has worked. It's dead. Time to bring it to stock and have Verizon fix or replace it. Thanks cyanogenmod!
Click to expand...
Click to collapse
Found this post on G+. Looks like it is a known issue that a radio didn't make it into the build.
https://plus.google.com/110116306685366816729/posts/2wnDGwd9UtX
Jerniganc said:
Found this post on G+. Looks like it is a known issue that a radio didn't make it into the build.
https://plus.google.com/110116306685366816729/posts/2wnDGwd9UtX
Click to expand...
Click to collapse
But I've flashed the radio and it didn't work for me. I tried two different ones and neither worked.
ned4spd8874 said:
Welp, going to have to Odin back to stock. Nothing has worked. It's dead. Time to bring it to stock and have Verizon fix or replace it. Thanks cyanogenmod!
Click to expand...
Click to collapse
No need to take your phone back to verizon.....The way to fix it is to Odin back to I535VRALF2. Once stock dial *2767*3855# let it do it's thing when it finishes reboot. After that 4G will be back. Re root and flash CM 10.1.0 NOT 10.1.0.1
Well an update on this. I flashed MIUIv5 found here http://forum.xda-developers.com/showthread.php?t=2232800 and it booted up and worked like a champ. From there I booted back into CWM and wiped, etc and installed a fresh RC5 and gapps. When the phone booted up the phone would take calls but would force close. From here I booted back into CWM, again wiped and then installed my RC5 backup I made this morning that was working and crossed my fingers. Well when the phone booted up it is working 100%!
I guess my question is what did 10.1.0.1 break that a flash to MIUIv5 fix?
Same issue. I had to wipe everything, format everything (maybe wasn't needed), flashed the newest nightly, latest baseband (something something F1), and gApps of course. I then had to check the "mobile network" settings and change it to SIM card (instead of NV) then reboot, and it worked.
The "stable" builds have been less stable than the nightlies lately, dunno why...
i'm also having this issue guys, I've noticed that my imei is 0. I've tried punching in the codes to get the utility, but can't get anything working...totally lost
RESOLVED!
It was a PITA, but I got 4G back with CM!
This is how I did it, but be forewarned that your device will be wiped, and it will not be a quick fix.
I first used this post (Section 5) to Odin back to stock.:
http://forum.xda-developers.com/showthread.php?t=1762709
Once I was back to stock, the network was still not working. So I dialed "*2767*3855#", it did something, rebooted and then 4G worked!
After that, I was able to follow the same guide from above (Section 1) to root the device, unlock the bootloader and install a recovery.
Once I was at that point, I installed CM from recovery. I had wanted to install the cm stable version 10.1.0, however I failed to copy that to my SD card before I started this whole process.
I had just moved and don't have many of my "tools" (i.e. sd adapters), so I couldn't even download it on my computer and copy it over. Oh, I also performed a factory wipe at this point as well as format the davlik and system...oops. So, yeah, couldn't simply boot it back up easily to copy the files over...got ahead of myself.
Anyways, I kept my fingers crossed and installed the only one that was on the sd card which was the nightly from 6/29. The good news is that worked!
I have since installed the latest nightly (6/30), because why the heck not? I was already on the previous, so it "shouldn't" hurt, right????
Nope, didn't hurt!
So, now I am running the latest nightly with full network access!
Whew, what a pain! Hope this helps you guys!
ned4spd8874 said:
RESOLVED!
It was a PITA, but I got 4G back with CM!
This is how I did it, but be forewarned that your device will be wiped, and it will not be a quick fix.
I first used this post (Section 5) to Odin back to stock.:
http://forum.xda-developers.com/showthread.php?t=1762709
Once I was back to stock, the network was still not working. So I dialed "*2767*3855#", it did something, rebooted and then 4G worked!
After that, I was able to follow the same guide from above (Section 1) to root the device, unlock the bootloader and install a recovery.
Once I was at that point, I installed CM from recovery. I had wanted to install the cm stable version 10.1.0, however I failed to copy that to my SD card before I started this whole process.
I had just moved and don't have many of my "tools" (i.e. sd adapters), so I couldn't even download it on my computer and copy it over. Oh, I also performed a factory wipe at this point as well as format the davlik and system...oops. So, yeah, couldn't simply boot it back up easily to copy the files over...got ahead of myself.
Anyways, I kept my fingers crossed and installed the only one that was on the sd card which was the nightly from 6/29. The good news is that worked!
I have since installed the latest nightly (6/30), because why the heck not? I was already on the previous, so it "shouldn't" hurt, right????
Nope, didn't hurt!
So, now I am running the latest nightly with full network access!
Whew, what a pain! Hope this helps you guys!
Click to expand...
Click to collapse
Yes, this just worked for me..however I look to be roaming completely when still in Stock
luniz7 said:
No need to take your phone back to verizon.....The way to fix it is to Odin back to I535VRALF2. Once stock dial *2767*3855# let it do it's thing when it finishes reboot. After that 4G will be back. Re root and flash CM 10.1.0 NOT 10.1.0.1
Click to expand...
Click to collapse
This worked for me.
Thanks!
I'm on vacation and tried to flash 10.1.0.1 and got hosed on the the radio connection. Nothing would work. Found an old nightly, 6/21 I believe, on my external SD card. Flashed that bad boy and I'm up and running again. Will do more trouble shooting when I get home in a few weeks and have my PC in front of me.
Sent from my SCH-I535 using Tapatalk 2
Back to RC5
I had a similar issue, upgraded to 10.1.01 and lost all data connectivity. Wiped clean and tried to upgrade again, then I could not get past the network activation screen.
Wiped and went back to a backup of RC5 and it restarted with less issues, but I still needed to go and correct the Mobile Network RUIM/SIM settings before I got data back.
RC5 has been solid, so I'm going to stick to it until there's a fix for 10.1.01.
this didnt work for me