Database Info

i am new here and i am in big problem for my infuse 4g after install custom rom

i have rooted my infuse 4g using odin using this thread http://forum.xda-developers.com/showthread.php?t=1613523. but after installing this my phone was okay, then after i took backup thru cwm, after that i installed rom of jellybean and after installing it my phone cant start, so i took battery out and again go to recovery mod and try to restore it but i m facing same problem, my phone not starting, even usb mount also not working,
i have format my infuse again and try to do it with odin again but it shows that
E: failed to mount/dbdata(file exist)
E: copy_dbdate_media:cant mount /dbdate
your storage not prepared yet, please use UI menu for format and reboot action.
media files copy failed.
please help me. i m worried about it coz just yesterday i bought it new. so please please help me.
i dont know what is UI menu also.

If you had read the OP, you can't go directly to JB, you have to be on ICS, then flash JB.
Which option did you use from that page? I've used "I997UCLB3-root.rar" many times. But sometimes it gets stuck and I have to pull the usb cable and start over.
So, use I997UCLB3-root.rar, to go back to stock GB. Then flash an ICS rom, reboot. Then flash a JB rom.

Truckerglenn said:
If you had read the OP, you can't go directly to JB, you have to be on ICS, then flash JB.
Which option did you use from that page? I've used "I997UCLB3-root.rar" many times. But sometimes it gets stuck and I have to pull the usb cable and start over.
So, use I997UCLB3-root.rar, to go back to stock GB. Then flash an ICS rom, reboot. Then flash a JB rom.
Click to expand...
Click to collapse
Thank you for your reply but i have tried directly to go to jellybean from GB 2.3.6 and i also tried now to root again using I997UCLB3-root.rat but then also my phone giving same error that E: cant mount and samsung logo come only

huseniezzaz said:
Thank you for your reply but i have tried directly to go to jellybean from GB 2.3.6 and i also tried now to root again using I997UCLB3-root.rat but then also my phone giving same error that E: cant mount and samsung logo come only
Click to expand...
Click to collapse
Flashing JB is a big leap. Some reading, specially when you are new, could have saved you the trouble. But well, now is time to learn the hard way.
Download any uclb3 back to stock pack, either Odin or heimdall. Put your phone in download mode:
1) take out battery and place it back.
2) while holding vol + & - , connect your phone with a usb cable already inserted into the Pc.
Once in download mode, see if your phone is detected by odin or heimdall. If not you may need to install the drivers.
When all is ready, hit start.
*you probably don't have GB bootloaders. That will cause rainbows in your recovery when flashing ics and jb. If you feel you cant live with them, you will need to flash them.*
To flash jellybean, 1st flash any ics rom following directions coming from GB in the OP. Once you have blue recovery, flash JB with the directions in the rom OP.
Sent from my sweet & buttery Infuse

huseniezzaz said:
Thank you for your reply but i have tried directly to go to jellybean from GB 2.3.6 and i also tried now to root again using I997UCLB3-root.rat but then also my phone giving same error that E: cant mount and samsung logo come only
Click to expand...
Click to collapse
read this, should help
http://forum.xda-developers.com/showthread.php?t=1776129
This too
http://forum.xda-developers.com/showthread.php?t=1437548

Thank you thank you thank you
andros11 said:
Flashing JB is a big leap. Some reading, specially when you are new, could have saved you the trouble. But well, now is time to learn the hard way.
Download any uclb3 back to stock pack, either Odin or heimdall. Put your phone in download mode:
1) take out battery and place it back.
2) while holding vol + & - , connect your phone with a usb cable already inserted into the Pc.
Once in download mode, see if your phone is detected by odin or heimdall. If not you may need to install the drivers.
When all is ready, hit start.
*you probably don't have GB bootloaders. That will cause rainbows in your recovery when flashing ics and jb. If you feel you cant live with them, you will need to flash them.*
To flash jellybean, 1st flash any ics rom following directions coming from GB in the OP. Once you have blue recovery, flash JB with the directions in the rom OP.
Sent from my sweet & buttery Infuse
Click to expand...
Click to collapse
I got my phone back. its working in 2.3.6 very nicely once again. thank you so much for response. i am very happy to see my phone start and i am smiling after 3 hours. huh. now i rooted it with odin I997UCLB3-CWM-root-deodex-extras.rar. now can you please tell me how can i install JB? i m curiously waiting to JB in my infuse. please make it JB.

huseniezzaz said:
I got my phone back. its working in 2.3.6 very nicely once again. thank you so much for response. i am very happy to see my phone start and i am smiling after 3 hours. huh. now i rooted it with odin I997UCLB3-CWM-root-deodex-extras.rar. now can you please tell me how can i install JB? i m curiously waiting to JB in my infuse. please make it JB.
Click to expand...
Click to collapse
The first link I posted for you will walk you through it. Read all the instructions, re-read, look up anything you don't understand, and then follow the directions.

huseniezzaz said:
I got my phone back. its working in 2.3.6 very nicely once again. thank you so much for response. i am very happy to see my phone start and i am smiling after 3 hours. huh. now i rooted it with odin I997UCLB3-CWM-root-deodex-extras.rar. now can you please tell me how can i install JB? i m curiously waiting to JB in my infuse. please make it JB.
Click to expand...
Click to collapse
As others mentioned, you first need to install an ICS ROM, like CM9 or Uniporn. The first time you flash you will prob get stuck in a boot loop and will need to use the three finger method to get back to recovery. In case you don't know what that means, you hold the volume keys and power button to turn phone on and then release only the power button when the Samsung logo shows. When u get back to recovery, flash the same ROM a second time and then it will boot.
You will now have blue recovery so you can flash the jb ROM of choice by following the method in the OP for that ROM. Remember to pull out the external sdcard if you have one.
Also, as others have mentioned, you may not have GB bootloaders. To get them, go to the "ISET infuse everything thread" which is stickied in the dev section. You will find Odin and Heimdall packages which have the bootloaders there. Be very careful when installing bootloaders (test usb with a kernel or something less dangerous first) bc if it fails while trying to flash the bootloaders, it can hard brick your phone. And then thank bigjoe for putting together the ISET thread so all infuse users can find everything we need in one place.
Sent from my SGH-I997 using xda app-developers app

Thank you thank you thank you
benbos_06 said:
As others mentioned, you first need to install an ICS ROM, like CM9 or Uniporn. The first time you flash you will prob get stuck in a boot loop and will need to use the three finger method to get back to recovery. In case you don't know what that means, you hold the volume keys and power button to turn phone on and then release only the power button when the Samsung logo shows. When u get back to recovery, flash the same ROM a second time and then it will boot.
You will now have blue recovery so you can flash the jb ROM of choice by following the method in the OP for that ROM. Remember to pull out the external sdcard if you have one.
Also, as others have mentioned, you may not have GB bootloaders. To get them, go to the "ISET infuse everything thread" which is stickied in the dev section. You will find Odin and Heimdall packages which have the bootloaders there. Be very careful when installing bootloaders (test usb with a kernel or something less dangerous first) bc if it fails while trying to flash the bootloaders, it can hard brick your phone. And then thank bigjoe for putting together the ISET thread so all infuse users can find everything we need in one place.
Sent from my SGH-I997 using xda app-developers app
Click to expand...
Click to collapse
Thank you so much, i have flashed JB successfully and GAPPs also. thank you once again. i followed your method and its very easy. first CWM was red i flash JB and after that i pull battery and start CWM at that time it was Blue and i flashed, now its installed.

One more HAPPY INFUSE OWNER.

Is this forum group great, or what!!!!!!

benbos_06 said:
As others mentioned, you first need to install an ICS ROM, like CM9 or Uniporn. The first time you flash you will prob get stuck in a boot loop and will need to use the three finger method to get back to recovery. In case you don't know what that means, you ...
Click to expand...
Click to collapse
I think if you don't know what "that" means...it means you have not read anything you probably need to read on this forum. and probably should not even be thinking about JB let alone trying to flash it.
No slight on you benbos_06, I thought it was funny reading uninformed posts about "rainbow colors" in their their recovery a few months ago...now it's almost kind of sad to see the uninformed trying to go JB...and needing double flash and 3 finger to recovery detailed in step by step instructions. Jeeze!!! That's a little scary.
Sent from a de-FUNKt Infuse

Smokestack360 said:
I think if you don't know what "that" means...it means you have not read anything you probably need to read on this forum. and probably should not even be thinking about JB let alone trying to flash it.
No slight on you benbos_06, I thought it was funny reading uninformed posts about "rainbow colors" in their their recovery a few months ago...now it's almost kind of sad to see the uninformed trying to go JB...and needing double flash and 3 finger to recovery detailed in step by step instructions. Jeeze!!! That's a little scary.
Sent from a de-FUNKt Infuse
Click to expand...
Click to collapse
+ 100... right on, Smoke !!

[Q] Clockworkmod Recovery updated, can't enter recovery mode

Hi, I've searched and can't find an answer. I've managed to root my Infuse and got Infinitum rom installed. It was working great until just this evening when Clockworkmod updated (sorry, I can't find the version number). It went into a boot loop. It took me a bit, but I managed to get it out of the boot loop and back to stock, now it's rooted again with Infinitum running again.
I'm trying to get back to a recovery point that I do have on the phone, but I can't get the phone to boot to recovery no matter what I do. When I try using the vol and power buttons combination or from ROM manager I get the same thing. It goes past the stock Samsung logo into the Galaxy S/Cyanogen(mod) logo, but freezes there.
I can, of course, take the loss of my setup and redo everything manually. I would really prefer to be able to get that backup back. I'm also concerned should I ever need to get into recovery mode for any other reason. My guess is that I need to downgrade the CWM version, but I haven't been able to find how to do it.
Can anyone give me any help? Please let me know if there's info that I can give that would be useful...I'm noobie, I know!

VyCariously said:
Hi, I've searched and can't find an answer. I've managed to root my Infuse and got Infinitum rom installed. It was working great until just this evening when Clockworkmod updated (sorry, I can't find the version number). It went into a boot loop. It took me a bit, but I managed to get it out of the boot loop and back to stock, now it's rooted again with Infinitum running again.
I'm trying to get back to a recovery point that I do have on the phone, but I can't get the phone to boot to recovery no matter what I do. When I try using the vol and power buttons combination or from ROM manager I get the same thing. It goes past the stock Samsung logo into the Galaxy S/Cyanogen(mod) logo, but freezes there.
I can, of course, take the loss of my setup and redo everything manually. I would really prefer to be able to get that backup back. I'm also concerned should I ever need to get into recovery mode for any other reason. My guess is that I need to downgrade the CWM version, but I haven't been able to find how to do it.
Can anyone give me any help? Please let me know if there's info that I can give that would be useful...I'm noobie, I know!
Click to expand...
Click to collapse
There are many layers to your questions.
You may need to read a bit more to get a better understanding.
Here is two points I can offer that may be helpful.
1. Don't use ROM Manager for the Infuse.
2. To downgrade a cwm version, you will need to flash a GB or FROYO kernel in download mode via heimdall or odin. You can also use any one of the return to stock that is flashed in download mode also.
If you think you lost recovery, try flashing the kernel for the rom you were running in cwm, if you can get back into cwm again.

qkster said:
There are many layers to your questions.
You may need to read a bit more to get a better understanding.
Here is two points I can offer that may be helpful.
1. Don't use ROM Manager for the Infuse.
2. To downgrade a cwm version, you will need to flash a GB or FROYO kernel in download mode via heimdall or odin. You can also use any one of the return to stock that is flashed in download mode also.
If you think you lost recovery, try flashing the kernel for the rom you were running in cwm, if you can get back into cwm again.
Click to expand...
Click to collapse
I believe you about the ROM Manager. Too late, unfortunately. I'll take it off.
I had the phone back to stock with Odin. I went through all of the steps that I went through to first root it and install Infinitum. I had red cwm at the time. I just can't seem to get into it now. I don't think I lost it, I'm just unsure of how to get to it, since it freezes at the cm startup. I can just power off from there after I give up waiting, and it will boot to ICS normally when I power it on normally. I have Titanium Backup Pro, and it can access the nandroid backup that I have to get the apps and data. I was just hoping to recover the whole setup. I had an issue last weekend (oops to me) when I tried to install a JB rom where it went into a boot loop. I recovered everything after backtracking like I did tonight, and was hoping to be able to do the same. Is there any hope, do you think, if I go back and return to stock and start over from the beginning again? If not, I'll just suffer and redo the whole thing.
By the way, I really appreciate you answering. I've been lurking for a few weeks, and realize that you know a LOT about these phones.

VyCariously said:
I believe you about the ROM Manager. Too late, unfortunately. I'll take it off.
I had the phone back to stock with Odin. I went through all of the steps that I went through to first root it and install Infinitum. I had red cwm at the time. I just can't seem to get into it now. I don't think I lost it, I'm just unsure of how to get to it, since it freezes at the cm startup. I can just power off from there after I give up waiting, and it will boot to ICS normally when I power it on normally. I have Titanium Backup Pro, and it can access the nandroid backup that I have to get the apps and data. I was just hoping to recover the whole setup. I had an issue last weekend (oops to me) when I tried to install a JB rom where it went into a boot loop. I recovered everything after backtracking like I did tonight, and was hoping to be able to do the same. Is there any hope, do you think, if I go back and return to stock and start over from the beginning again? If not, I'll just suffer and redo the whole thing.
By the way, I really appreciate you answering. I've been lurking for a few weeks, and realize that you know a LOT about these phones.
Click to expand...
Click to collapse
Okay, so next question. I've been reading and searching and reading some more. I can get the phone back to stock and work up again, but I still reach a point where it will freeze on the Samsung/CM startup screen. In reading the Infinitum Project thread, I found this (yes, it's pretty easy to find):
"Recovery/CWM messed up?
Here is how to fix it...
1) Download uclb3 heimdal by qkster
2) open the program
3) put phone in download mode
4) click flash (leave program open when finished DO NOT CLOSE)
5) after it finishes and your phone reboots, put the phone back in download mode and reconnect to PC
6) click flash bootloader on the heimdal program you left running
7) flash, let reboot and your recovery problems should be gone"
I used that to get back to stock before...doesn't that remove the root? Do I have to go through all that, then the bootloaders, and then go back and root all over again to get back to a working CWM? I'm sorry to ask so many questions, but it seems that I've done most of this already, though I admit to not doing the flash for the bootloader. I'm just unclear since it says "your recovery problems should be gone" at the end of that, like I have to do nothing more.

That does remove root access. However, root isn't really necessary, at least for the stock ROM, if you have no intentions of staying stock. The ROM .zips you'll subsequently flash are pre-rooted. After you Heimdall back to stock, and flash it again with "flash bootloaders" selected, then use Heimdall to flash this kernel:
http://d-h.st/6KA
That'll flash both a new kernel and CWM Red recovery. It'll take a few minutes to boot up the first time, as it's installing the lagfix. Once it boots up, just shut it down and boot back up in recovery. From there, you can do whatever you need to do.

VyCariously said:
Okay, so next question. I've been reading and searching and reading some more. I can get the phone back to stock and work up again, but I still reach a point where it will freeze on the Samsung/CM startup screen. In reading the Infinitum Project thread, I found this (yes, it's pretty easy to find):
"Recovery/CWM messed up?
Here is how to fix it...
1) Download uclb3 heimdal by qkster
2) open the program
3) put phone in download mode
4) click flash (leave program open when finished DO NOT CLOSE)
5) after it finishes and your phone reboots, put the phone back in download mode and reconnect to PC
6) click flash bootloader on the heimdal program you left running
7) flash, let reboot and your recovery problems should be gone"
I used that to get back to stock before...doesn't that remove the root? Do I have to go through all that, then the bootloaders, and then go back and root all over again to get back to a working CWM? I'm sorry to ask so many questions, but it seems that I've done most of this already, though I admit to not doing the flash for the bootloader. I'm just unclear since it says "your recovery problems should be gone" at the end of that, like I have to do nothing more.
Click to expand...
Click to collapse
As Apex pointed out, each time we bring the phone back to stock, we lose root access and all the previous setup. It's a fact of flashing.
No big deal though, rooting is easy and is not really needed. What is needed is the insecure kernel with cwm. The link Apex gave you is the same as the posted kernel in post #2 of the thread. That kernel will give you the cwm. Review that thread if you haven't yet.
Flash the heimdall uclb3 repartition package. Immediately after it successfully boot your phone, don't close the program. check the bootloader box and put the phone back into dl mode and flash it again to get your gb bootloaders...
then flash the kernel.
review my how to thread if you need to.
Andros11 also made a how to for JB if you want to live vicariously.
gl

qkster said:
Andros11 also made a how to for JB if you want to live vicariously.
gl
Click to expand...
Click to collapse

Thanks guys
It's been a crazy busy week and I just didn't have time to deal with the phone. I've been dealing with stock gingerbread. It's getting kind of annoying, though, it seems less stable than the custom ICS that I had on it before. Not sure when I'm going to have time to play with it again and try to get it to where I want it. I think I'm going to try to totally wipe all of the old stuff out of the memory before I do it again, though. There's something that wasn't allowing me to do what you guys are telling me to do successfully. I'm also thinking of finding a GS2 and just selling the Infuse, not because of my confusion, but because the GS2 was what I was originally looking for anyway.
I'll try to get this one set up first, though, as it's just a matter of me being obsessive about it.
qkster, I'll look into the JB, too, lol.
qkster said:
As Apex pointed out, each time we bring the phone back to stock, we lose root access and all the previous setup. It's a fact of flashing.
No big deal though, rooting is easy and is not really needed. What is needed is the insecure kernel with cwm. The link Apex gave you is the same as the posted kernel in post #2 of the thread. That kernel will give you the cwm. Review that thread if you haven't yet.
Flash the heimdall uclb3 repartition package. Immediately after it successfully boot your phone, don't close the program. check the bootloader box and put the phone back into dl mode and flash it again to get your gb bootloaders...
then flash the kernel.
review my how to thread if you need to.
Andros11 also made a how to for JB if you want to live vicariously.
gl
Click to expand...
Click to collapse

Hey I am not the Infuse user... But I faced similar problem in my xperia some days back after updating the recovery.
I was also not able to enter recovery at boot time using my usual volume down way...
What the change was the new recovery checks for tap on the screen (repeatetive) instead of volume down button...
Not sure if it will work or not for you... But you can give a try...
Hit thanks if it works
Sent from my MT11i using xda app-developers app

XperiaNeoVNoob said:
Hey I am not the Infuse user... But I faced similar problem in my xperia some days back after updating the recovery.
I was also not able to enter recovery at boot time using my usual volume down way...
What the change was the new recovery checks for tap on the screen (repeatetive) instead of volume down button...
Not sure if it will work or not for you... But you can give a try...
Hit thanks if it works
Sent from my MT11i using xda app-developers app
Click to expand...
Click to collapse
I didn't get a chance to try it, sorry! I ended up wiping my phone totally back to stock Gingerbread with nothing on the sd card, either, and starting all over again. It seems to be working really well this time (fingers crossed). RemICS-UX is pretty much awesome

VyCariously said:
I didn't get a chance to try it, sorry! I ended up wiping my phone totally back to stock Gingerbread with nothing on the sd card, either, and starting all over again. It seems to be working really well this time (fingers crossed). RemICS-UX is pretty much awesome
Click to expand...
Click to collapse
No probs...
:thumbup:
Sent from my MT11i using xda app-developers app

Atrix 2 ics leak #2 stuck on cm10 boot!

Okay, so here's a long story short. I flashed AT&T ICS leak #2 when I first got my replacement due to a brick. I ran SCV7 for a week or so and decided to try out CM10. I restored my backup of stock/rooted backup. Uninstalled highjacks, packages and app (bootmenu) itself. I then installed our OG A2 bootstrap, installed fine, installed CM10, played around with it for awhile. Realized I didnt reinstall the OG A2 Bootstrap so went ahead and did that. (without booting into recovery yet) I then later in the day decided to REBOOT my phone to only find me stuck on the CM10 boot animation. I battery pulled, plugged in to see if any recovery would show, none, just the battery charge percentage. I then battery pulled again, got into stock recovery, tried a data and cache wipe to no effect. My problem is, there is NO FXZ for the AT&T leak #2, I have no recovery besides stock and the only thing I can do is take my 32GB SD card out and add/delete files/everything. I saddly did not make a copy of the system.img but was wondering if anyone else possibly did? This would be greatly appreciated as I am stuck with a soft brick until then or a new FXZ to work with AT&T leak #2. Any suggestions or help is very much appreciated. Thanks all for reading and I'm praying for a miracle in my phone right about now lol!

DX2Trip said:
Okay, so here's a long story short. I flashed AT&T ICS leak #2 when I first got my replacement due to a brick. I ran SCV7 for a week or so and decided to try out CM10. I restored my backup of stock/rooted backup. Uninstalled highjacks, packages and app (bootmenu) itself. I then installed our OG A2 bootstrap, installed fine, installed CM10, played around with it for awhile. Realized I didnt reinstall the OG A2 Bootstrap so went ahead and did that. (without booting into recovery yet) I then later in the day decided to REBOOT my phone to only find me stuck on the CM10 boot animation. I battery pulled, plugged in to see if any recovery would show, none, just the battery charge percentage. I then battery pulled again, got into stock recovery, tried a data and cache wipe to no effect. My problem is, there is NO FXZ for the AT&T leak #2, I have no recovery besides stock and the only thing I can do is take my 32GB SD card out and add/delete files/everything. I saddly did not make a copy of the system.img but was wondering if anyone else possibly did? This would be greatly appreciated as I am stuck with a soft brick until then or a new FXZ to work with AT&T leak #2. Any suggestions or help is very much appreciated. Thanks all for reading and I'm praying for a miracle in my phone right about now lol!
Click to expand...
Click to collapse
Hey, and sort of welcome back...
But I hate to be the bearer of bad, bad news... you have a softbrick, and there is NOTHING you can do.
Next time, read everything in an OP... LOL, look who I am telling this to....
The CM10 installs come with their own CWM built in, and flashing bootstrap is what bootlooped you, so after you get another warranty replacement (yes, you HAVE to do this), I would install leak #1 ONLY, then flash cm10 with bootstrap, then do not reinstall any boot hijacks or CWM "like" recovery (bootmenu), because all you have to do it hit the vol down button right as you see the blue led flash during the M dual core logo.

Or enter the CM10 recovery menu and so on and so forth.
This is how I got out of a cm10 boot-loop.
I just restored from bootmenu backup via adb.

tcf38012 said:
Or enter the CM10 recovery menu and so on and so forth.
This is how I got out of a cm10 boot-loop.
I just restored from bootmenu backup via adb.
Click to expand...
Click to collapse
he can't, he installed bootstrap while on cm10m, so he can't get to cwm anymore.

Scratch that ----- Deleted

Well, thanks everyone. Specially you jim. Anyone wanna throw me an fxz they think MIGHT work for the second ICS leak? I'm willing to take the risk since I have nothing else to lose. Ill be most likely calling AT&T tomorrow and give some excuse. Soft brick or hard brick...Ill get a replacement...
Sent From My Eclipsed DROID X2!

DX2Trip said:
Well, thanks everyone. Specially you jim. Anyone wanna throw me an fxz they think MIGHT work for the second ICS leak? I'm willing to take the risk since I have nothing else to lose. Ill be most likely calling AT&T tomorrow and give some excuse. Soft brick or hard brick...Ill get a replacement...
Sent From My Eclipsed DROID X2!
Click to expand...
Click to collapse
I will get with alteredlikeness and see if we can possibly think of something together on this one. The first thought would be to try an mearet/searet fxz for 2.3.6 since they can fxz back with out any mods to thier 2.3.6 or 2.3.5 fxz from thier ICS leaks, but I am thinking that will still brick you, but interested to see anyhow.
So I will see if alteredlikeness and I can think of some other way to try. He or I will PM you either way.

jimbridgman said:
I will get with alteredlikeness and see if we can possibly think of something together on this one. The first thought would be to try an mearet/searet fxz for 2.3.6 since they can fxz back with out any mods to thier 2.3.6 or 2.3.5 fxz from thier ICS leaks, but I am thinking that will still brick you, but interested to see anyhow.
So I will see if alteredlikeness and I can think of some other way to try. He or I will PM you either way.
Click to expand...
Click to collapse
he can flash just a system. img from ics though, And that should recover it
Sent from my MB865 using xda premium

lkrasner said:
he can flash just a system. img from ics though, And that should recover it
Sent from my MB865 using xda premium
Click to expand...
Click to collapse
You know, I was seeing in recovery how youbcan flash an update through sd AND system which has a lost and found folder and recovery folder. Dont know if this is of any info but either way because I wouldnt know how to put anything in system since I cant seem to get adb to recognize or moto-fastboot...I'm in a very confused state of mind and almost came to the point of hard brick but I refuse. I'll leave it up to ya devs. Thanks againg everyone.
Sent from my MB870 using xda premium

i have same issue , any way to flash system img, and where whould i get system img from? i have preiviously backed up thru cwm

justdrew said:
i have same issue , any way to flash system img, and where whould i get system img from? i have preiviously backed up thru cwm
Click to expand...
Click to collapse
Try following this:
http://forum.xda-developers.com/showthread.php?t=1926873

First Softbrick it seems In Trouble
jimbridgman said:
Try following this:
http://forum.xda-developers.com/showthread.php?t=1926873
Click to expand...
Click to collapse
Guys need your urgent help i am into a trouble what is it called technically may be a Soft brick but this is what has happened.
I was trying the Magic mod the installation went superb booted the phone it worked properly and then i used the bootstrap :silly: and tried starting the phone in recovery after which my phone is now stuck at magic mod boot animation. PLEASE HELP.
I am upto a point where have installed drivers latest rsd lite 6.0 ready with the extracted fxz 6.7.2_EDEM-18-SEARET_cfc.xml but phone is not showing up in rsd lite so that i can flash my phone. Phone says USB connected in AP Fastboot mode have a look at the attachment of my desktop. Please HELP guys....
Thanks & Regards,
Beginner Android (Ravi D)

havent you just posted this in the any question answered here thread and getting help there ??

Wow, almost forgot I made this thread lol. But sounds like your drivers need a good updating. Reboot PC after updating and try again is all I can say. Hope this helps.
Sent from my MB865 using xda premium

[Q] Atrix 2 help!

Hi guys!
I tried searching for a similar problem that I have but wasn't able too. So I need your help here.
So I lost my CID, didn't back it up so was using bptools for it when I was on JB leak3.
1) I flashed CM11, 4.4.2 dated 14 Dec after flashing gapps, it removed my recovery and was bootlooping
2) I reflash the same leak3 which used to work earlier using RSDlite. Now the rom isn't booting i.e. it is stuck in it's "pumping logo".
3) I again try reflashing using RSDlite, only this time, it fails and status is shown as battery low in fastboot. Now I connect charger, it boots, stuck in the white screen which is expected since I lost my CID.
So, does this mean that it's charging? If not, am I screwed??

shubham1120 said:
Hi guys!
I tried searching for a similar problem that I have but wasn't able too. So I need your help here.
So I lost my CID, didn't back it up so was using bptools for it when I was on JB leak3.
1) I flashed CM11, 4.4.2 dated 14 Dec after flashing gapps, it removed my recovery and was bootlooping
2) I reflash the same leak3 which used to work earlier using RSDlite. Now the rom isn't booting i.e. it is stuck in it's "pumping logo".
3) I again try reflashing using RSDlite, only this time, it fails and status is shown as battery low in fastboot. Now I connect charger, it boots, stuck in the white screen which is expected since I lost my CID.
So, does this mean that it's charging? If not, am I screwed??
Click to expand...
Click to collapse
If fastboot says low battery then u cant RSD.....
Google Mcgruyver method or externally charge ur battery....( ie if you get a white led )
If your in india it shouldn't be a problem finding an external universal battery charger in any cell shop....

darth_nihar said:
If fastboot says low battery then u cant RSD.....
Google Mcgruyver method or externally charge ur battery....( ie if you get a white led )
If your in india it shouldn't be a problem finding an external universal battery charger in any cell shop....
Click to expand...
Click to collapse
Thanks for your reply buddy!
But it was charging even when the screen was white. So now I'm on JB leak 3. Any idea why did my recovery uninstalled automatically?

shubham1120 said:
Thanks for your reply buddy!
But it was charging even when the screen was white. So now I'm on JB leak 3. Any idea why did my recovery uninstalled automatically?
Click to expand...
Click to collapse
Dude if fast boot says low battery RSD wont flash it............whether or not it was charging with a white screen
So u have to externally charge the battery
And from what i know u can't flash ICS once ur on the JB leak ie u can't downgrade so u will have to flash the same leak again......

shubham1120 said:
Thanks for your reply buddy!
But it was charging even when the screen was white. So now I'm on JB leak 3. Any idea why did my recovery uninstalled automatically?
Click to expand...
Click to collapse
BMM can be like that sometimes. There are a few possible ways that it could've happened. As long as you make a backup before trying anything, and have RSD lite and your FXZ handy it shouldn't be too much of a problem. It's more aggravating than anything else...
darth_nihar said:
Dude if fast boot says low battery RSD wont flash it............whether or not it was charging with a white screen
So u have to externally charge the battery
And from what i know u can't flash ICS once ur on the JB leak ie u can't downgrade so u will have to flash the same leak again......
Click to expand...
Click to collapse
If he was getting the "pumping" Motorola logo boot animation, then he was only boot looping so he was able to charge the battery. The battery would've only been an issue if the phone was booting straight into fastboot, or if it wouldn't get past the boot logo.
Also you can downgrade from jb to ICS, just not from ICS to GB.
If I had a dollar for every time I said that, I'd be making money in a very weird way.

1BadWolf said:
BMM can be like that sometimes. There are a few possible ways that it could've happened. As long as you make a backup before trying anything, and have RSD lite and your FXZ handy it shouldn't be too much of a problem. It's more aggravating than anything else...
If he was getting the "pumping" Motorola logo boot animation, then he was only boot looping so he was able to charge the battery. The battery would've only been an issue if the phone was booting straight into fastboot, or if it wouldn't get past the boot logo.
Also you can downgrade from jb to ICS, just not from ICS to GB.
If I had a dollar for every time I said that, I'd be making money in a very weird way.
Click to expand...
Click to collapse
I din know u can never tried the leaks coz of AT&T but i read somewhere that it changes or updates
the recovery or bootloader ??
Edit: My bad you can downgrade back to ICS
wangs cn leak said u might not so thats where i read it .....

Deja vu!!
1BadWolf said:
BMM can be like that sometimes. There are a few possible ways that it could've happened. As long as you make a backup before trying anything, and have RSD lite and your FXZ handy it shouldn't be too much of a problem. It's more aggravating than anything else...
If he was getting the "pumping" Motorola logo boot animation, then he was only boot looping so he was able to charge the battery. The battery would've only been an issue if the phone was booting straight into fastboot, or if it wouldn't get past the boot logo.
Also you can downgrade from jb to ICS, just not from ICS to GB.
If I had a dollar for every time I said that, I'd be making money in a very weird way.
Click to expand...
Click to collapse
Hey!
IDK what was I thinking but I flashed pa 4.4.2 gapps on CM11 by altered and BOOM! Lost recovery and bootloop.
So I re-flashed leak 3 it's now stuck in boot animation("pumping"--again what was I thinking lol!) meaning a softbrick. Why is it happening? I mean is it a bad flash?
Or does it have something to do with leak 3? If so, I can't seem to find ics fxz. The superthread links are dead. My another question is-
Will I be able to us AT&T fxz? Since I've already lost my CID, it shouldn't be a problem right?
PROBLEMS PROBLEMS PROBLEMS!:silly:
Also, can anyone give me the link for asian version of ICS?
EDIT- Was able to boot! went to stock recovery, wiped data and cache partition. Thanks for help guys

shubham1120 said:
Hey!
IDK what was I thinking but I flashed pa 4.4.2 gapps on CM11 by altered and BOOM! Lost recovery and bootloop.
So I re-flashed leak 3 it's now stuck in boot animation("pumping"--again what was I thinking lol!) meaning a softbrick. Why is it happening? I mean is it a bad flash?
Or does it have something to do with leak 3? If so, I can't seem to find ics fxz. The superthread links are dead. My another question is-
Will I be able to us AT&T fxz? Since I've already lost my CID, it shouldn't be a problem right?
PROBLEMS PROBLEMS PROBLEMS!:silly:
Also, can anyone give me the link for asian version of ICS?
EDIT- Was able to boot! went to stock recovery, wiped data and cache partition. Thanks for help guys
Click to expand...
Click to collapse
If you ever want to use the JB leaks again, DO NOT flash the AT&T FXZ. Just a forewarning just in case you get stuck again and start considering it.
If I had a dollar for every time I said that, I'd be making money in a very weird way.

1BadWolf said:
If you ever want to use the JB leaks again, DO NOT flash the AT&T FXZ. Just a forewarning just in case you get stuck again and start considering it.
If I had a dollar for every time I said that, I'd be making money in a very weird way.
Click to expand...
Click to collapse
OMG you're right! Never thought of that! Thank God I acted patiently here. I was gonna flash AT&T ics just before trying that wiping data thing!
Thanks! Will keep that in mind.
One more question though(and hopefully the last..)
Can I flash PA Gapps on slimkat? Since both are based on AOSP right?

i guess i've a problem . by mistake while i was supposed to backup cid , i chose the option erase cid and it s deleted, no backup either. now whenever i reboot, my phone shows some error. since i've bmm i am being able to load into ics in system 1 . is there any possible way to get rid of this error message about cid during startup?? because it is really annoying.

Am I most certainly hard bricked?

1) Was on stock 4.04 ICS
2) Rooted the phone
3) Installed Bootstrap recovery
4) SOFTBRICKED by trying to install a Kitkat based rom (Liquid kitkat ) using recovery.
5) So apparently Liquid Kitkat rom was installed..........and was SOFT BRICKED
Got Motorola logo then blank screen
6) RSDLITE failed to flash FXZ Gingerbread InlineFlashing_edison_5.5.175.16_cfc_p3_APBP_CID285.zip
This part failed on the reboot (I understand now this was a no no)
QUESTION: Would FXZ 4.04 ICS have been fine for fixing this with RSDLITE?
........ Now nothing will come up...will not turn on.........
no button routines will turn this on.......
the only light that will turn on is the white let when the battery is removed and plugged into pc.
So is this pretty much hard bricked without a way to DIY fix it?
Thanks.

Try the following link to recover your device
Hi,
Refer this link by which you can get your device back to working....
http://forum.xda-developers.com/showpost.php?p=36834775&postcount=108
It needs FXZ file to be flashed to ics again. Then root and enjoy custom roms.....
As per my very little knowledge it is safe to use boot menu manager (BBM) then Atrix Boot strap.....
Please let me know if the above think works for you... It worked for me .....

vipinpvarghese said:
Hi,
Refer this link by which you can get your device back to working....
http://forum.xda-developers.com/showpost.php?p=36834775&postcount=108
It needs FXZ file to be flashed to ics again. Then root and enjoy custom roms.....
As per my very little knowledge it is safe to use boot menu manager (BBM) then Atrix Boot strap.....
Please let me know if the above think works for you... It worked for me .....
Click to expand...
Click to collapse
Won't work. ...... my problem is the phone won't turn on.......cannot currently enter fastboot or any boot option..........hence possibly "hard-bricked".
Thanks anyways.

poog said:
1) Was on stock 4.04 ICS
2) Rooted the phone
3) Installed Bootstrap recovery
4) SOFTBRICKED by trying to install a Kitkat based rom (Liquid kitkat ) using recovery.
5) So apparently Liquid Kitkat rom was installed..........and was SOFT BRICKED
Got Motorola logo then blank screen
6) RSDLITE failed to flash FXZ Gingerbread InlineFlashing_edison_5.5.175.16_cfc_p3_APBP_CID285.zip
This part failed on the reboot (I understand now this was a no no)
QUESTION: Would FXZ 4.04 ICS have been fine for fixing this with RSDLITE?
........ Now nothing will come up...will not turn on.........
no button routines will turn this on.......
the only light that will turn on is the white let when the battery is removed and plugged into pc.
So is this pretty much hard bricked without a way to DIY fix it?
Thanks.
Click to expand...
Click to collapse
By the name of the FXZ file, it seems you have an AT&T Atrix 2. Sorry to say, but your phone's hard bricked by downgrading it to GB from ICS.

XploitMachine said:
By the name of the FXZ file, it seems you have an AT&T Atrix 2. Sorry to say, but your phone's hard bricked by downgrading it to GB from ICS.
Click to expand...
Click to collapse
Thanks for the reply. Didn't I effectively try to go from Softbricked "Liquid Kit-Kat " to Gingerbread?
Since I installled Liquid Kitkat CM11-based.......(which softbricked me after trying to boot that )................would the ICS version of FXZ worked properly?
In other words, did I need to use a kit-kat based FXZ to recover from softbrick with RSDLITE?..........or just ICS?
Thanks

poog said:
Thanks for the reply. Didn't I effectively try to go from Softbricked "Liquid Kit-Kat " to Gingerbread?
Since I installled Liquid Kitkat CM11-based.......(which softbricked me after trying to boot that )................would the ICS version of FXZ worked properly?
In other words, did I need to use a kit-kat based FXZ to recover from softbrick with RSDLITE?..........or just ICS?
Thanks
Click to expand...
Click to collapse
There's no official Jelly Bean for our device, let alone KitKat and hence none of the respective FXZs. So, yes, you should have flashed ICS FXZ in order to recover from the soft-brick.

XploitMachine said:
There's no official Jelly Bean for our device, let alone KitKat and hence none of the respective FXZs. So, yes, you should have flashed ICS FXZ in order to recover from the soft-brick.
Click to expand...
Click to collapse
Thanks.....what sucks is the download page I went to first only had the GB version.....so I DLed that.
Then later I saw a page with both versions GB and ICS.

Have you tried....
poog said:
Won't work. ...... my problem is the phone won't turn on.......cannot currently enter fastboot or any boot option..........hence possibly "hard-bricked".
Thanks anyways.
Click to expand...
Click to collapse
Have you tried the method in the link given.....?? Even my phone was not booting at all... When I switch on there was no changes seen on the screen.... But it was getting recognized in PC as USB device connected.... I was able to run the bat file mentioned in the link and to my surprise it was recovered..... By the way how you concluded that it is a hard brik....

vipinpvarghese said:
Have you tried the method in the link given.....?? Even my phone was not booting at all... When I switch on there was no changes seen on the screen.... But it was getting recognized in PC as USB device connected.... I was able to run the bat file mentioned in the link and to my surprise it was recovered..... By the way how you concluded that it is a hard brik....
Click to expand...
Click to collapse
You might be having International version of Atrix 2 or you might be on ICS Leak or GB, and hence you could recover your phone.
Downgrading an AT&T Atrix 2 from ICS to GB is 100% hard brick. Read around and you will get information on more such cases.

You had 2 mistakes:
1/ Use Bootstrap recovery instead of BMM to flash kexec ROMs
2/ Flash GB instead of ICS when the phone (AT&T) has already been on ICS (deadly mistake)

Hi. hard brickIn this way the device is to survive

Issue Solved??
Did your problem solved? If not you could give it a try the method I told you..... Mine is an international version... I downloaded FXZ for retail asian.... My phone was not at all showing anything when I click power button..... So if you tried all options you can give it a try...

poog said:
Won't work. ...... my problem is the phone won't turn on.......cannot currently enter fastboot or any boot option..........hence possibly "hard-bricked".
Click to expand...
Click to collapse
You are not hard bricked. Your battery is very low hense the white led. You will have to straight wire the battery. Red+ Black- i brought mine back like this. Make sure u are using the correct fxz to.