Hi,
I'd like to buy an Atom, but I cannot find any real feedback on how usable the device is with one hand, lacking hardware button to map on the WM5 softkeys.
Can someone report if it is possible (and easy) to press the on-screen softkeys with one's thumb?
I'd like also answers from Wizard/Prophet owners, that can compare the usability of hardware vs on-screen buttons (but please do not participate in the poll).
arg0: you can press the softkeys on the screen, and if you have dedicated hardware keys you can of course press those. If you can't manually assign the softkeys to other non-dedicated hardware keys, tell me about it and I'll knock some thing up to sort it.
V
vijay555 said:
arg0: you can press the softkeys on the screen, and if you have dedicated hardware keys you can of course press those. If you can't manually assign the softkeys to other non-dedicated hardware keys, tell me about it and I'll knock some thing up to sort it.
V
Click to expand...
Click to collapse
hi!
What I'd like to know is: can you easily press the softkeys on the screen, using only one hand? (atom has no hardware buttons for the softkeys, and before buying it I want to be sure that one-handed operation is possible).
Thanks.
you can do it, but it's not easy because at least on the equivalent device (magician), the edge of the device tends to get in the way of the softkeys, which are like 7mm high. But it's perfectly feasible, and in the absense of dedicated keys, why not!?
None of these phones are particularly well setup for one handed use, but with some work, can be made that way!
V
vijay555,
thanks for the answer!
This is the first real user feedback I get about this.
I hope now that some Atom user will report, too.
I have been using the ATOM for the past 1 month and I have always used my thumb to activate the Softkey on the screen
it is much more comfortable that way
The ATOM is too small to use the bottom key (o2 media plus key ) as soft key (only key that can be reassigned in the front panel )
Also U cannot re map the Windows key as of now
I have been using the ATOM for the past 1 month and I have always used my thumb to activate the Softkey on the screen
it is much more comfortable that way
The ATOM is too small to use the bottom key (o2 media plus key ) as soft key (only key that can be reassigned in the front panel )
Also U cannot re map the Windows key as of now
Guys, can you not assign the Softkeys to hardware keys?
I could write an app to do that...
V
stargator said:
I have been using the ATOM for the past 1 month and I have always used my thumb to activate the Softkey on the screen
it is much more comfortable that way
The ATOM is too small to use the bottom key (o2 media plus key ) as soft key (only key that can be reassigned in the front panel )
Also U cannot re map the Windows key as of now
Click to expand...
Click to collapse
Thanks, good to know that that can be done.
What are the hardware buttons that can be remapped?
I read in a review that four hardware buttons can be remaped:
that should be "o2 media plus", "camera", "voice note".
What is the fourth? Power?
As i know that touch pro is not only can be touched on the screen but also the hard button area ( home, back, call, hang up buttons)
How can i use that feature
Which software that i need to install or how can i active it
Thank for reading my topic
What do you want exactly? Do you want to remap hardware buttons?
the hardware buttons are enabled by default. you don't have to 'activate' them.
No! My point is how can i use the sensor of hardware button ^^
Well,did you mean to use the capacitive surface of those sensors,not the buttons itself? And what exactly do you want? Please explain.
google for "G-scroll"
TomasNM said:
Well,did you mean to use the capacitive surface of those sensors,not the buttons itself? And what exactly do you want? Please explain.
Click to expand...
Click to collapse
My point is
Instead of pushing down the 4 hard buttons (call, back, home, hang off) i just need to touch it on the surface?
You can buy gscroll (mobilesrc.com), but unless you can get the 1.x series, I'd pass. The 2.x series is buggy as hell, and it seems like development has stopped. There are some free apps you can find around here as well. I'm thinking Dredscroll is one, and there was another app called Butler (I think, lol) that allowed you to use it as a launcher with gestures on the area. Gscroll lets you swipe to scroll (it's good for reading ebooks, when it's working) as well as to launch things, but it has the annoying habit of going on smoking breaks.
As I know HTC testing software,I can say,it could not be a problem to create an app of this kind,but...
- Do we have SDK for it(I didin't searched for it yet)?
- Currently I don't know,how to send keyboard hooks to the system
- I cannot prevent/disable default keyboard hooks
So that means,I am not able to solve your puzzle. Sorry.
That was my honest opinion...
I don't think he's asking about the Vibrant-Scroll Wheel, I think he's talking about the Optical Track, itself.
[As the Home, Back, Answer, & End Call buttons require you to actually PUSH them down.]
You know, the "OK/Enter" button. When you place you finger on it [NOT PRESS IT], by default, it lights up the Bottom Hardware Keys, as well as brightens the screen.
If it's not working for you, I recommend Backing up your Important Information with either SPB Backup or Microsoft MyPhone, and flashing a New ROM. There are certain Drivers that control the Optical Track. What they are, however, is beyond me.
Hi all,
In case anyone was wondering, the following Bluetooth keyboards work with the Infuse, running Gingerbread 2.3.3.
General Note: all devices below paired up seamlessly. They were immediately detected, and simply required me to key in a 6 digit passkey (4 digits for the Apple Magic Mouse).
1) Microsoft Bluetooth Mobile Keyboard: in all honesty, this keyboard worked the BEST out of all three that I tried today. As an FYI, F1 triggered Menu, Home triggered Home, and Esc triggered back. Reason why I didn't dig it all to much was the rather 'flimsy' build quality, although I do use the 7000 Entertainment set at home.
2) Logitech Tablet Keyboard for Android (3.0+?): Ignoring the 3.0 spin, and focusing on the fact that it's an HID-compliant BT device, I picked this up to give it a whirl. Niceties include the case that it comes with, which doubles into a stand for your device. Major setback that made me return it: the Menu button didn't work for me! Otherwise, a fantastic setup.
3) The keeper: Motorola Xoom BT Keyboard. Very similar in functionality to the Logitech offering. Started off pretty bummed because the built-in Menu keys on this kb didn't work either. Where the Moto saves itself, though, is that they keep they have a 5th row, atop the rest of the keyboard similar to a standard desktop keyboard (the Logitech trimmed these off and only had 4 rows), and within that 5th row, was an F1 key (which, after trial and error on the MS kb, triggers Menu). All in all, a nice package. Good to know I can rip away at longer emails with this thing, if I ever need to.
4) Apple Magic Mouse: nothing special here - paired easily, works like a mouse.
Quirks: 1
1) When pairing the Moto to a non-Moto device, you need to hold down the keys V, A and R when initiating the pair (don't worry, it's in the manual).
2) When the screen times out while paired to the KB (not the mouse), a cursor mysteriously appears, and is persistent until I disable BT connectivity on the device.
3) If you use a pattern to unlock your device, you might want to switch to a PIN or password, if you'd really like to be able to unlock your device from the keyboard...
4) "End" on the keyboard locks the screen. From my round of testing, all keys can unlocks (pretty neat) as long as you don't have a pattern set (meaning, you unlock with a PIN or password.)
5) The kb stays paired; the mighty mouse, i need to tap on to connect from within Settings each time.
That's about it. Feel free to ask me any questions if you had any, or correct me if you've me off base with any.
Can you give us some amazon links per keyboard so we can check specifications on the keyboard and maybe purchase one. I'm gonna need one that works with both the infuse and the motorola atrix.
Thanks
Sent from my SAMSUNG-SGH-I997R
Any idea if these will work with the stock at&t rom?
Apples Magic Mouse
Are we saying the magic mouse works on the xoom just like a normal mouse would?
Hello XDA! I'm one of those old school guys who likes physical keyboard on phone. Specially I like qwerty sliders but the bad thing is that they are dying out. (Watch out small screens, you are next!). Of course there is Priv but I think that it is sliding wrong way. So I decided to make my own qwerty slider:
I bought "The Beast" Xiaomi Mi4C and a bluetooth qwerty keyboard case for iPhone 6 (about 20$). First I cut the edges from the case, drilled hole for a speaker and made the camera hole little bit bigger for flash light. Then I just glued phone and case together. Because I cut the edges from the case there was about 1-3mm meeting between case and phone. I filled the cap with Sugru™. It should last for usage and temperature changes (between -50°C to +180°C).
For the software part I rooted my Mi4C and flashed CM13. Then I installed Keyboard Manager. With that app you can change keyboard based on orientation automatically. For landscape I use Minuum Keyboard with Mini Mode because I wanted the 5th number row. In the settings you can make the Minuum Keyboard only 140px (60+80) high. It takes only 13% of your screen space on Mi4C. If you don't want to use Minuum Keyboard you can use Null Input Method. In portait I use Google Keyboard. (Hint: You can transfer your dictionary from other keyboard to Minuum Keyboard).
When you install the Keyboard Manager you need to make this fix:
ne0fhyk said:
If you are unable to launch the app after installation, please follow these steps:
- Look in your sdcard folder for the directory /Android/data/com.ne0fhykLabs.android.utility.kmLauncher/files/
- There should be an apk file there, Keyboardmanager.x.y.apk, where x,y stands for the version number
- Copy that file to /system/app/, and change the permissions to rw-r--r-- (Read/write for owner, read for group, and read for other)
- Reboot your device, and try running the app again.
Click to expand...
Click to collapse
Total dimensions are 139 x 69.6 x 16 mm and weight is 228 g but I have installed tempered glass screen protector. For comparison Motorola Droid 4: 127 x 67.3 x 12.7 mm and 178.9 g. Here is more pictures:
http://imgur.com/a/Pbvpo
Here are some similar projects:
NUU keyboard and Alcatel One Touch Star
Turning Samsung galaxy note 4 (SM-N910F) into a mobile pc
OnePlus X and iPhone 6 qwerty case (finnish)
Xiaomi Note 2 and Galaxy S4 qwerty case (finnish)
Hit thanks if you liked my mod
PS: I already bought another original back cover so I can change back to "normal" phone if I like (not going to happen :silly
I have found one 5 row bluetooth keyboard case. It is for iPhone 5/5s so it is much smaller. Maybe it is possible to mod it to Mi4C or other phone (Xperia Z5 Compact?):
That's great. I've seen these few Bluetooth sliding keyboards and have been wondering if it was possible to mod them to fit other phones, and obviously it is!
Does the sliding mechanism have any kind of sensor that will tell the phone whether the keyboard is open or not? I use an Xperia Pro and often slide the keyboard open to wake the phone, and also force it into landscape mode. I also sometimes deliberately shut the keyboard in order to gain access to the landscape on-screen keyboard for special symbols, and it would be easier if I could keep it in landscape mode to do that rather than switch to portrait.
With the keyboard closed I guess the speaker is a bit muffled?
pelago said:
That's great. I've seen these few Bluetooth sliding keyboards and have been wondering if it was possible to mod them to fit other phones, and obviously it is!
Does the sliding mechanism have any kind of sensor that will tell the phone whether the keyboard is open or not? I use an Xperia Pro and often slide the keyboard open to wake the phone, and also force it into landscape mode. I also sometimes deliberately shut the keyboard in order to gain access to the landscape on-screen keyboard for special symbols, and it would be easier if I could keep it in landscape mode to do that rather than switch to portrait.
With the keyboard closed I guess the speaker is a bit muffled?
Click to expand...
Click to collapse
The keyboard that I have does not have any sensor that could tell if the keyboard is open or not. However, I believe that it could be pretty easy to implement with NFC. You could just put NFC tag to the keyboard (where?) and the phone would recognize when the keyboard is closed. (I mean that there would be connection in closed position and no-connection in opened position). Mi4C doesn't have NFC so I can't test this. Actually I don't miss that feature at all. I'm pretty happy with double tap. Also you can simply press one button on keyboard and it will wake up the screen.
It is also possible to implement a switcher for keyboard. With Tasker and Secure Settings you can make a toggle which change the keyboard. And if you wanna be really geeky you can control that toggle with gestures using AutomateIt (or maybe Tasker can do this also) and All in one Gestures. So if you use Null Input Method in landscape you can just swipe up to change it to Google Keyboard for example.
For me Minuum Keyboard has every special symbol that I need. Actually only ones that are missing from keyboard are "[" and "]". There are tons of possibilities to tweak with. It is possible to lock phone in landscape with gestures also. You just have to be little bit creative. Of course "native" QWERTY slider is always better but I'm happy with my mod.
The speaker is not that bad in closed position in my Mi4C. As you can se from the teardown pictures the speaker is located only in the left side of the phone when you look from back. Also the keyboard does not cover the speaker directly so there is a air cap between speaker and keyboard. You can test this by placing your thumb directly to the speaker and then test again and leave this time a 5mm cap between finger and speaker.
Flash-A-Holic said:
The keyboard that I have does not have any sensor that could tell if the keyboard is open or not. However, I believe that could be pretty easy to implement with NFC. You could just put NFC tag to the keyboard (where?) and the phone would recognize when the keyboard is closed. (I mean that there would be connection in closed position and no-connection in opened position). Mi4C doesn't have NFC so I can't test this. Actually I don't miss that feature at all. I'm pretty happy with double tap. Also you can simply press one button on keyboard and it will wake up the screen.
It is also possible to implement a switcher for keyboard. With Tasker and Secure Settings you can make a toggle which change the keyboard. And if you wanna be really geeky you can control that toggle with gestures using AutomateIt (or maybe Tasker can do this also) and All in one Gestures. So if you use Null Input Method in landscape you can just swipe up to change it to Google Keyboard for example.
For me Minuum Keyboard has every special symbol that I need. Actually only ones that are missing from keyboard are "[" and "]". There are tons of possibilities to tweak with. It possible to lock phone in landscape with gestures also. You just have to bi little bit creative. Of course "native" QWERTY slider is always better but I'm happy with my mod.
The speaker is not that bad in closed position in my Mi4C. As you can se from the teardown pictures the speaker is located only in the left side of the phone when you look from back. Also the keyboard does not cover the speaker directly so there is a air cap between speaker and keyboard. You can test this by placing your thumb directly to speaker and then test again leaving and 5mm cap between finger and speaker.
Click to expand...
Click to collapse
For my similar project you've already seen, I've used tasker to automate the phone unlock and horizontal rotation when the NUU keyboard slides out and so connects to BT.
On NUU keuboard there isn't nothing that inform the phone that the keyboard is closed, other than the BT disconnection timeout.
So i made a number of conditions to get practical the exit from the qwerty mode.
The phone turned in vertical, if the screen went in standby, if the phone was oriented verctically, and if a physical button was long pushed.
With tasker I had also the automated soft keyboard switch, because the SW keyboard I wanted to use with the vertical keyboard wasn't physical keyboard friendly. So I used two different sw keyboards that switched automatically depending if the phone was landscape or portrait mode.
The landscape keyboard could be the simple null keyboard, if you don't care about the spell checking function.
How's the weight distribution with this combination? With "native" qwerty phones, like Xperia Pro, and Nokia N900, the weight is mostly in the lower half (the keyboard half), with the top half only being the screen itself. This means that the bit you hold and type on is the heavier one.
With your project, is the top (screen/phone) half heavier than the keyboard, and if so, does that mean it feels top heavy if you're holding it by the keyboard only, and feel like it might topple to the ground?
How's the battery life on the keyboard? It would be annoying to have to charge it every day like the phone itself.
Which exact keyboard did you use? Did you take any pics of the making process, to turn it into a sort of tutorial?
EDIT: Have you done this, or seen it done by others, on different model phones?
pelago said:
How's the weight distribution with this combination? With "native" qwerty phones, like Xperia Pro, and Nokia N900, the weight is mostly in the lower half (the keyboard half), with the top half only being the screen itself. This means that the bit you hold and type on is the heavier one.
With your project, is the top (screen/phone) half heavier than the keyboard, and if so, does that mean it feels top heavy if you're holding it by the keyboard only, and feel like it might topple to the ground?
How's the battery life on the keyboard? It would be annoying to have to charge it every day like the phone itself.
Which exact keyboard did you use? Did you take any pics of the making process, to turn it into a sort of tutorial?
EDIT: Have you done this, or seen it done by others, on different model phones?
Click to expand...
Click to collapse
I haven't measured the weight yet but I will do that later today and add it to the first post. The weight is 228g. For me it is pretty light weigh compared to the size. (Xiaomi Mi 4C itself weights 132g). The weight distribution is pretty stable. I mean if I open the keyboard and leave the phone to the table it will stay steady. I can even push the screen part and it will go back where it was. It doesn't feel that it is going to flip when I'm holding it. Of course there is more weight in the screen part but it is pretty stable.
The battery life of the keyboard is very good. I don't even know how long it will last. I have been charging the keyboard once a week. For phone I got 4h SOT in one charge with bluetooth always on. Sorry, I didn't take any pictures during the process. However, here is one picture when I was testing this combination with double-sided tape. Back then there was nasty cap between case and phone. I filled that cap with Sugru™. I don't know if anyone else has done this kind of mod excluding The Solutor. Althought I have found this: Turning Samsung galaxy note 4 (SM-N910F) into a mobile pc
I believe that I bought this one: Mini Bluetooth V3.0 Ultra-thin Wireless Slide-Out Keyboard case cover for iPhone 6 (4.7). I bought it from different seller from ebay and it was cheaper but the name is same (V3.0).
The Solutor said:
For my similar project you've already seen, I've used tasker to automate the phone unlock and horizontal rotation when the NUU keyboard slides out and so connects to BT.
On NUU keuboard there isn't nothing that inform the phone that the keyboard is closed, other than the BT disconnection timeout.
So i made a number of conditions to get practical the exit from the qwerty mode.
The phone turned in vertical, if the screen went in standby, if the phone was oriented verctically, and if a physical button was long pushed.
With tasker I had also the automated soft keyboard switch, because the SW keyboard I wanted to use with the vertical keyboard wasn't physical keyboard friendly. So I used two different sw keyboards that switched automatically depending if the phone was landscape or portrait mode.
The landscape keyboard could be the simple null keyboard, if you don't care about the spell checking function.
Click to expand...
Click to collapse
Actually you were an inspiration for me, thank you . I will check what Tasker can do for me. For now I think that bluetooth timeout method is too slow. I think that double tab is much faster and easier.
Flash-A-Holic said:
Actually you were an inspiration for me, thank you .
Click to expand...
Click to collapse
Thanks
I will check what Tasker can do for me. For now I think that bluetooth timeout method is too slow.
Click to expand...
Click to collapse
Well, I wrote too quickly, and I wanted to be brief just beacause I don't want to hijiak other's threads.
Anyway, the BT timeout didn't require tasker at all. It's just an internal timeout of the NUU keyboard.
What tasker did in that scenario, was the exit contition:
Enter condition ---> the keyboard slides out and connects to BT. Tasker rotates the screen, switches the keyboard, unlocks the phone (if needed) and so on.
On BT timeout (which is managed by the keyboard)--- tasker reverted the above actions.
Additionally I made a number of other conditions to force the exit task.
The phone is hold vertically for a second or so, the screen is turned off (because the power button was pushed, or because the phone turned it off), a physical button was long pushed, and maybe others that I don't remember.
Obviously there only your fantasy is the limit. You can choose a gesture, a tap combination, a shake action...
Whatever tasker and its plugins are able to manage...
Want to make me one? How much do you want?
Supovitz said:
Want to make me one? How much do you want?
Click to expand...
Click to collapse
Maybe it is better that you make it by yourself. I believe that shipping cost etc. would cost too much for you.
Flash-A-Holic said:
First I cut the edges from the case, drilled hole for a speaker and made the camera hole little bit bigger for flash light. Then I just glued phone and case together. Because I cut the edges from the case there was about 1-3mm meeting between case and phone. I filled the cap with Sugru™.
Click to expand...
Click to collapse
I was wondering about the reason for cutting off the edges and then filling the gap with Sugru. I don't have the parts yet, but I assume the problem is that the phone is slightly too large to sit within the keyboard case edges as manufactured?
It would be great if there was a way to simply remove the phone from the keyboard case just by pulling the phone out, as you can do with the iPhone 6 the case is designed for. Would there be any way to modify the case to make that possible?
Also, is the back of the keyboard case less slippery than the original Mi 4C back cover?
pelago said:
I was wondering about the reason for cutting off the edges and then filling the gap with Sugru. I don't have the parts yet, but I assume the problem is that the phone is slightly too large to sit within the keyboard case edges as manufactured?
It would be great if there was a way to simply remove the phone from the keyboard case just by pulling the phone out, as you can do with the iPhone 6 the case is designed for. Would there be any way to modify the case to make that possible?
Also, is the back of the keyboard case less slippery than the original Mi 4C back cover?
Click to expand...
Click to collapse
Yes Mi4C doesn't fit to the iPhone case properly. If you want removable keyboard case then you can buy a cover case for Mi4C. Then just glue the cover case and keyboard case together. You can also pull out the whole sliding mechanism like this (not my modification):
There is pretty good grip in the keyboard case. Much less slippery than Mi4C.
Thanks.
Looking around, I've found someone doing something similar. A few years old, but may be useful for some ideas: https://www.youtube.com/watch?v=1cu6UCobKyY
I've just bought one of those sliding keyboards for iPhone 6. It looks a little different to your one - mine looks like:
Specifically, mine has a sliding power switch on the left, a Bluetooth sync button above that, the space bar is only two normal letters width rather than three, it has an extra "clover" button on the right of the space bar, the labelling is different on some keys to the left, and the keys in general look flatter than yours.
I haven't tried modding it yet, but I'm a bit put off by the power switch, as I would rather not have to switch the keyboard off and on manually. Does your keyboard have a power switch on it too, somewhere else?
I know that beggars can't be choosers, but having tried this keyboard for a while (in conjunction with a Nexus 7 (2013), as I don't actually have a Mi 4C yet), there are some aspects of it which aren't perfect.
For a start, the keys are quite clicky, much more so than my Xperia Pro or Nokia N900, making it noisier to use whenever there is someone else around.
I would like there to be a Ctrl key - I've been trying to use External Keyboard Helper to map keys, and the ideal one looks like the two clover keys, but I can't seem to map those. When I press those keys I get a big animated white border around the entire screen - is that Google Now? I don't know, as I don't use that.
There is also an annoying few seconds delay after pressing a key to wake up the keyboard and the device responding. With my previous phones with intergrated keyboards, they respond straight away. This is presumably just because of Bluetooth and nothing can really be done about that.
The five-row Boxwave keyboard buddy you mention in the second post looks interesting, but I can't seem to find it (or any generic branded clones) on ebay unfortunately.
pelago said:
I would like there to be a Ctrl key - I've been trying to use External Keyboard Helper to map keys, and the ideal one looks like the two clover keys, but I can't seem to map those. When I press those keys I get a big animated white border around the entire screen - is that Google Now? I don't know, as I don't use that.
Click to expand...
Click to collapse
It's been a while since I did that phone, but, assuming you're rooted you should be able to adjust the keylayout to your lickings
https://source.android.com/devices/input/key-layout-files.html
There is also an annoying few seconds delay after pressing a key to wake up the keyboard and the device responding.
Click to expand...
Click to collapse
I assume that depends on the keyboard used. my NUU keyboard did connect when sliding out, not when the first key was pressed.
Taking account there was a small delay since the connection, because tasker had to wakeup and unlock the phone (if locked and/or sleeping) and to force the horizontal orientation (and optionally to swap the SW keyboard with something mechanical friendly like swiftkey or touchpal), I had no perceivable delay on the first key pressed.
P.S. Guys please resize a bit such huge images before posting them.
They break the forum layout using the classic skin (the yellow one)
The Solutor said:
It's been a while since I did that phone, but, assuming you're rooted you should be able to adjust the keylayout to your lickings
https://source.android.com/devices/input/key-layout-files.html
Click to expand...
Click to collapse
That's a good pointer, I'll look into that. It would be good to remap the keys without using External Keyboard Helper.
The Solutor said:
I assume that depends on the keyboard used. my NUU keyboard did connect when sliding out, not when the first key was pressed.
Click to expand...
Click to collapse
Unfortunately the keyboard I was trying doesn't seem to have any kind of sensor that would know when the keyboard was slid out or not.
I followed Flash-A-Holic's great example and built a cover for Huawei P8 Lite.
Here's the process:
http://symbioosi.blogspot.fi/2016/11/how-to-physical-keyboard-for-huawei-p8.html
Scorpizoid said:
I followed Flash-A-Holic's great example and built a cover for Huawei P8 Lite.
Here's the process:
http://symbioosi.blogspot.fi/2016/11/how-to-physical-keyboard-for-huawei-p8.html
Click to expand...
Click to collapse
Did you just apply a back case from another casing to the bluetooth keyboard of a slider case?
Super happy to have found this thread. I'm using my Motorola Droid 4, but it's lost its GPS antenna, and I'm really tempted to jump at this Moto G4 Plus... Just held it in-store at Best Buy, and it feels massive, something I wouldn't type on with just one hand holding it. I just want landscape QWERTY keyboard functionality!
Scorpizoid said:
I followed Flash-A-Holic's great example and built a cover for Huawei P8 Lite.
Here's the process:
http://symbioosi.blogspot.fi/2016/11/how-to-physical-keyboard-for-huawei-p8.html
Click to expand...
Click to collapse
After being disappointed by Blackberry's attempts at a physical keyboard, I'm back to strongly considering this approach. Your blog post is a great inspiration for finally upgrading my Motorola Photon Q LTE to something that can run something more than Android 4.1.2...
What's the most powerful android phone in roughly the right form-factor for this keyboard case? I see you're ripping off the iPhone case part and attaching a proper case for the Huawei, and I'd do similar, but I'd want the whole thing to be vaguely the right shape. Like, attaching this keyboard to a Pixel XL would just be silly, but there aren't that many android phones around the size of the iPhone 6/7.