Related
Hey guys,
I created a patch for CM9_alpha5, which allows you to use PDroid by svyat and the V6 Supercharger Script by zeppelinrox with CM9
Please read the instructions carefully!
And as always: DO A BACKUP
For more informations read the necessary threads:
PDroid: http://forum.xda-developers.com/showthread.php?t=1357056
V6 Supercharger: http://forum.xda-developers.com/showthread.php?t=991276
Main-Instructions
1. Download the update_cm9_alpha5.zip (at the end of this post)
2. Reboot into recovery and flash it
3. Reboot your system
Click to expand...
Click to collapse
Instructions for PDroid
1. Do the Main-Instructions
2. Download and intall the PDroid-App from GooglePlay
Click to expand...
Click to collapse
Instructions for V6SuperCharger
Pre-Installation
1. Do the Main-Instructions
2. Download the following Starter-Kit: http://forum.xda-developers.com/attachment.php?attachmentid=1241890&d=1344115573
3. Unzip it and Place the folder in your /sdcard
4. Download and install ScriptManager from GooglePlay.
5. Open ScriptManger, click "Browse as Root" and grant root permissions
6. Run the StartMeUp.sh with ScriptManager as root in the folder you created during step 3 and follow the instructions on the screen.
Click to expand...
Click to collapse
Now your environment is correctly set up and you are good to go for V6.
Installation
1. Download the following file: http://forum.xda-developers.com/attachment.php?attachmentid=1156827&d=1340704008
2. Make sure to erase the .pdf extension, so that it is called "V6_SuperCharger_for_Android-Update9_RC10.sh"
3. Place V6_SuperCharger_for_Android-Update9_RC10.sh on your /sdcard
4. Run V6_SuperCharger_for_Android-Update9_RC10.sh via ScriptManager as root.
5. Follow the instructions on the screen. (Read the V6Superchager-Thread for more informations.)
6. Enjoy the Speed
Click to expand...
Click to collapse
Credits
zeppelinrox
svyat
mateorod
pastime1971
stuck on bootscreen after flashing update on paranoidandroid
It's for CM9 alpha 5 ....
And If I don't flash the Update is there a problem.I already had installed the V6 Supercharger...Thanks.
I don't know if there will be a problem, test it out.
Whats is pdroid and what is supercharger v6? I m noob
Ur explaination myt make me install both of them ryt now
Sent from my GT-I9001 using xda premium
drummer1839 said:
It's for CM9 alpha 5 ....
Click to expand...
Click to collapse
yo bro but it has cm9 alpha 5 as base .... so whts wrng ?? .... nevamind will try out standone installin super charger
rahilsayed said:
Whats is pdroid and what is supercharger v6? I m noob
Ur explaination myt make me install both of them ryt now
Sent from my GT-I9001 using xda premium
Click to expand...
Click to collapse
Just read the Threads I Posted at the beginning.
Sent from my GT-I9001 using xda app-developers app
c0dac0da said:
yo bro but it has cm9 alpha 5 as base .... so whts wrng ?? .... nevamind will try out standone installin super charger
Click to expand...
Click to collapse
PARANOID has CM9 as base thats right, but never than less it's another ROM and needs it's own modified Services. Jar
Sent from my GT-I9001 using xda app-developers app
true
Woohoo!
drummer1839 said:
It's for CM9 alpha 5 ....
Click to expand...
Click to collapse
Yes it is, but it works on cm9-20120719-NIGHTLY-galaxysmtd.
Just installed, works fine, so far.....
Thanks crybert....heaps.
Yes, it works on CM9, but it doesnt work on RemICS Got stuck on boot animation.
Thanks anyway!
I install all.. So, how do I know is it working or not?
Joy` said:
I install all.. So, how do I know is it working or not?
Click to expand...
Click to collapse
start the script again, it would tell you if its working or not.
i cant download the superchargers installation file
Download Link ist okay. Try it again with Right click -> save as.
Sent from my GT-I9001 using xda app-developers app
What the heck? My phone is actually incredibly fast! I was not expecting such a result! Thanks for this fantastic work!
Super awesome thing to have on cm9 build 5......please continue this mod on evry stage on cm9
really awesome
1000000 thanks
Sent from my GT-I9001 using xda premium
how long should it take to reboot?
mine just turned off and isn't booting at all for the first 10 minutes...
EDIT: guess i had to boot it on my own hehe, im wondering why didn't it reboot...
scipt is working 100% as it says but I don't feel the difference...
Using CM9 bulid 5, not paranoid as in signature
Hi!
i found a nice mod from GALAXY S who works on s+ too..
I test Shadowgun Dead Zone with this MOD..it's smooth as hell!
Download MOD
http://forum.xda-developers.com/showthread.php?t=1978061
How to install it:
OPTION 1:
Download SManager from Market.
Put VMLAG on your Internal SD.
With a File Manager,rename the VMLAG(ex VMLagTuner_1_9MP4.pdf to VMLagTuner_1_9MP4 )
Open SManager and serch the file.
And make it look like mine(press SU and Boot) and " IS SCRIPT" .(i post a screen)
Than,press " RUN "
Wait,and that's it. Than,reboot your phone.(Wait for installation)
OPTION 2:
Download the last VMLAG,and just rename (Ex from VMLAGTUNER_1_9MP4.pfd to VMLAGTUNER_1_9MP4
And than,download a root File Manager (like es file) and put file in init.d (i guess /system/etc/init.d )
After,restart your phone.
I test this mod only with Shadow0-Rom-Ics (http://forum.xda-developers.com/showthread.php?t=2014511)
I will make a video to show you Dead Zone without lag on our phone.
Credits: LENAROX (It's his mod)
I guess it's ok to take this post for future video's .
Thank you very much ++++
I will test and report
Sent from my GT-I9001 using xda app-developers app
I put it in init.d folder.
What is command in terminal emulator to see if it works?
Device: Samsung Galaxy S Plus (I9001)
ROM: PAC-man rom 18.0.0 by camcory
Kernel: Stock
Recovery: TWRP TeamWin Recovery Project 2.2.1
USING XDA-APP
Open your terminal emulator
Type as follows:
su ( Press enter)
sysctl -a | grep vm (Enter again)
search for vm.vfs_cache_pressure; if its equal to 300 (I guess you are using the latest script version, cause this value change every new release ), then the script takes affect after boot.
it's compatible with jb roms?
davidteri91 said:
it's compatible with jb roms?
Click to expand...
Click to collapse
Yes.
It's compatible with all ROM's. You just need to have a inti.d support .
Tested on arco's CM9 beta4. NFS Most wanted runs smooth. (had some lags in certain races).
Why this
Sysctl:error reading key 'net.ipv4.route.flush: per mission denied
Sysctl:error reading key 'net.ipv6.route. flush: per mission denied
Inviato dal mio GT-I9001 con Tapatalk 2
davidteri91 said:
Why this
Sysctl:error reading key 'net.ipv4.route.flush: per mission denied
Sysctl:error reading key 'net.ipv6.route. flush: per mission denied
Inviato dal mio GT-I9001 con Tapatalk 2
Click to expand...
Click to collapse
Same
Btw. You may want to add a second way to install this. Remove extensions and add in init.d folder. This way you can always experience this script.!
Sent from my GT-I9001 using xda app-developers app
RobyRc said:
Hi!
i found a nice mod from GALAXY S who works on s+ too..
I test Shadowgun Dead Zone with this MOD..it's smooth as hell!
Download MOD
http://forum.xda-developers.com/showthread.php?t=1978061
How to install it:
Download SManager from Market.
Put VMLAG on your Internal SD.
With a File Manager,rename the VMLAG(ex VMLagTuner_1_9MP4.pdf to VMLagTuner_1_9MP4 )
Open SManager and serch the file.
And make it look like mine(press SU and Boot) and " IS SCRIPT" .(i post a screen)
Than,press " RUN "
Wait,and that's it. Than,reboot your phone.(Wait for installation)
I test this mod only with Shadow0-Rom-Ics (http://forum.xda-developers.com/showthread.php?t=2014511)
I will make a video to show you Dead Zone without lag on our phone.
Credits: LENAROX (It's her mod)
Click to expand...
Click to collapse
btw Its not 'her' its 'his'
Dude im not a female.
sent from androidmeda galaxy
LENAROX said:
btw Its not 'her' its 'his'
Dude im not a female.
sent from androidmeda galaxy
Click to expand...
Click to collapse
Sorry xD.
There is already a nice "HowTo Install" guide in the thread that you linked to, why would we need another one containing less information?
mine is not 300.It is 50.How do I change it?
cistamlaka said:
mine is not 300.It is 50.How do I change it?
Click to expand...
Click to collapse
Do you have init.d support and the script in the right directory?
Sent from my GT-I9001 using xda app-developers app
Ok guys here is the flashable zip of this mod that I made for my ROM SmoothieICS
http://www.mediafire.com/?zla77zz07tvkzpo
EternalFame said:
Do you have init.d support and the script in the right directory?
Sent from my GT-I9001 using xda app-developers app
Click to expand...
Click to collapse
I'm using cm10 by ivendor so I do have support for init.d.I downloaded it,deleted the .pdf from file(renamed it) and put it in init.d folder located system/etc/.Then I rebooted like it says in instructions.
edit:I installed busybox and changed permissions of the file to rwx-rwx-rx.It says 300 now
---------- Post added at 05:21 PM ---------- Previous post was at 05:20 PM ----------
Brahmnoor said:
Ok guys here is the flashable zip of this mod that I made for my ROM SmoothieICS
http://www.mediafire.com/?zla77zz07tvkzpo
Click to expand...
Click to collapse
will it work on other roms like cm10 ivendor,doomsday etc. ?
cistamlaka said:
I'm using cm10 by ivendor so I do have support for init.d.I downloaded it,deleted the .pdf from file(renamed it) and put it in init.d folder located system/etc/.Then I rebooted like it says in instructions.
edit:I installed busybox and changed permissions of the file to rwx-rwx-rx.It says 300 now
---------- Post added at 05:21 PM ---------- Previous post was at 05:20 PM ----------
will it work on other roms like cm10 ivendor,doomsday etc. ?
Click to expand...
Click to collapse
It should work on every android rom!
Sent from my GT-I9001 using xda app-developers app
I conferm works perfectly on JB aokp alpha 2 Thanks dude for this mod
Inviato dal mio GT-I9001 con Tapatalk 2
Hey everyone !
I just made a simple tool for unpacking and packing kernels for Linux using bash scripts ..
Maybe helpful for start up devs and others alike !
I hope this tool will be beneficial to devs / kernel devs / ROM devs too.. for cutting down the time in typing a lot of stuff.
#include<disclaimer.h>
NOTE : Keep a backup of your kernel / boot.img always in hand.. I am not responsible for bootloops. Whatever you do.. Its your responsiblity. If you point a finger at me.. I will laugh at you !
Click to expand...
Click to collapse
How to use this tool ??
Download the zip !
Extract it to the suitable directory.
Copy boot img too the directory.
Open terminal.
Change directory to kernel tools directory.
Run init.sh only if your running the script for the first time!
Type code :
Code:
./init.sh
Now tool is configured !
To extract boot.img :
Code:
./unpack.sh
To repack boot.img :
Code:
./pack.sh
To start from fresh again for new kernel build :
Code:
./fresh.sh
I am adding a blank zip to flash any kernel:
Just add modules to system > lib > modules
and add boot img to the zip along with meta-inf folder and system folder .
Hope this helps the whole community !
Those who have issues with " Permission denied problems " ... Right click on the .init.sh and give it suitable permissions.. or do a chmod +x on init.sh and then run it..
Kernel Tool Version 2 !
With new GUI and no hassles !
Worth a try View attachment K-EX-2.zip
New version : Version 3
Great Work Mate :good::good:
Re: [DEV][TOOL] Kernel Tool [19-3-2013]
Nice trick Will be helpful altrough, I actually have it for myself already
Re: [DEV][TOOL] Kernel Tool [19-3-2013]
galaxyfreak said:
Nice trick I actually have it for myself already
Sent from my HTC Explorer A310e using xda app-developers app
Click to expand...
Click to collapse
+1 hope it helps those who can't do it / don't know about it . cheers..
Sent from my Nexus 7 using xda app-developers app
nice work released just in time needed it for my work tested and worked good
Re: [DEV][TOOL] Kernel Tool [19-3-2013]
Thanks brother...
Had to use dsi xda kitchen only for unpacking kernels..
This tool will save some time..
Sent from my HTC Explorer A310e using xda app-developers app
What I was searching for, Thanks :good:
View attachment K-EX-2.zipUpdate ! New UI and feature and fixed old bugs ! Thanks Vineeth for informing me about the bug .
If I wasn't limited to 8 thanks a day...
Sorry guys, but, this tool is recommended for everyone, dev and n00b alike...
Dev's may like to use commands, but newbies, take some time to learn...
This tool, makes your work easier, and faster...
p.s. use the original commands twice-thrice to get the flow of it... then, consider using this tool
Re: [DEV][TOOL] Kernel Tool Version 2 [31-3-2013]
For changing ramdisk(cm9 to 10/10.1etc. ) ~after boot.img split into kernel and ramdisk.cpio.gz,
Is it enough to replace the ramdisk.cpio.gz from the older working one without opening ramdisk.cpio.gz/messing with it?
LâTêS†↭ⓛⓘⓝⓚⓢ™CM10 HTC A310E.
If I haven't given you link, it's above. Just click it
Re: [DEV][TOOL] Kernel Tool Version 2 [31-3-2013]
Yeah that's fine.. no need to open and unpack it ..
Ps newer version has a kernel Porter.. just name the kernel as instructed in the tool it automatically ports the kernel according to what you want to do .. from boot Img to boot IMG..
And for the kernel devs from a new zimage to another bootimg from which ramdisk is req
Newer tool took a really long time to type .. lol no response (
Sent from my HTC Explorer A310e using xda app-developers app
Re: [DEV][TOOL] Kernel Tool Version 2 [31-3-2013]
akshat.shenoy said:
Yeah that's fine.. no need to open and unpack it ..
Ps newer version has a kernel Porter.. just name the kernel as instructed in the tool it automatically ports the kernel according to what you want to do .. from boot Img to boot IMG..
And for the kernel devs from a new zimage to another bootimg from which ramdisk is req
Newer tool took a really long time to type .. lol no response (
Sent from my HTC Explorer A310e using xda app-developers app
Click to expand...
Click to collapse
Actually, the newer version didn't have init.sh ...is that ok?
And I can't probably use any of that stuff.. so can't report on that (coz I burnt my PC some time back ~literally )
LâTêS†↭ⓛⓘⓝⓚⓢ™CM10 HTC A310E.
If I haven't given you link, it's above. Just click it
Re: [DEV][TOOL] Kernel Tool Version 2 [31-3-2013]
ptcpayme said:
Actually, the newer version didn't have init.sh ...is that ok?
And I can't probably use any of that stuff.. so can't report on that (coz I burnt my PC some time back ~literally )
LâTêS†↭ⓛⓘⓝⓚⓢ™CM10 HTC A310E.
If I haven't given you link, it's above. Just click it
Click to expand...
Click to collapse
No need for that.. As I have simplified everything into a single persistent menu based GUI... Just needs a chmod +x in case it doesn't run..
Sent from my Nexus 7 using Tapatalk HD
:good:
Nice work.. Works perfectly..
:good::good: +1 mate
Too good man!! Keep up the awesome work!!:thumbup:
Sent from my HTC Explorer using xda premium
New Version
Hey.
Here is a new version of kernel tool by me...
Source : Here Github
Source : Here Google Code
How to Install?
Download as zip from Here
OR
Code:
git clone [email protected]:russelldias98/Kernel-Tool.git
Instructions Here
Changes : made a script to make a flashable zip and changed UI a bit
Preparing a new GUI Version
Thank you!
Great job
Sent from my ST21i2 using Tapatalk 2
I have A Mobile Qmobile A2 [Rooted] I have Made A Backup From It And Then Tried It To Compile It With Dxisa's Kitchen
But After The ZIP Has Been Created .. Now when i Try it to flash .. it Gives Me (Status 0) Error : Installation Aborted Is Any one here Who Can Make me A Updater-Script of my Rom i Think The Problem is There
Thanks
Its not the updater script, its the update-binary that's giving you problem.
Take an update-binary from any zip file that works for you and replace it into your zip file.
Sent from my GT-P7500 using XDA Premium HD app
Its not the updater script, its the update-binary that's giving you problem.<br />
<br />
Take an update-binary from any zip file that works for you and replace it into your zip file.<br />
<br />
Sent from my GT-P7500 using XDA Premium HD app
Click to expand...
Click to collapse
Yes it true. Follow this step.
Sent from my GT-S5360 using HYPERION 8 via xda app
eushaun99 said:
Its not the updater script, its the update-binary that's giving you problem.
Take an update-binary from any zip file that works for you and replace it into your zip file.
Sent from my GT-P7500 using XDA Premium HD app
Click to expand...
Click to collapse
Are You Sure Can I Take That From my 2nd Mobile Wildfire S Roms..And Put That Update-Binary in This Mobiles Rom ?
No.. don' take the update-binary from the WFS.. isn't there really a flashable zip for your phone that you could use?
Ya its a Local Brand In Our Country :..I Can Upload the system.img and boot.img will you help me out and make me a flashable Zip Pleaseee..? Djoliver..?/
Or Guide Me How Can I Make One Or Whatever ..
Thnks
So I found a ROM for you device and extracted the update-binary.. Here it is (xda won't let me upload files without extensions, so I zipped it, just extract it and put it in your ROM
Don't forget to smash that thanks button!! :victory:
djolivier said:
So I found a ROM for you device and extracted the update-binary.. Here it is (xda won't let me upload files without extensions, so I zipped it, just extract it and put it in your ROM
Don't forget to smash that thanks button!! :victory:
Click to expand...
Click to collapse
Ohh Man .. That Was Cool Btw Where Did You Get that From..?
And ya Can You Find The Updater-Script too And ya I WIll Chk Now That It Works Or Not
Thanks Very very very Thanks Too YOU ..
Here's the ROM I used. Just take your files from "META-INF". But I doubt this updater-script will work.
meowhussi said:
Ohh Man .. That Was Cool Btw Where Did You Get that From..?
And ya Can You Find The Updater-Script too And ya I WIll Chk Now That It Works Or Not
Thanks Very very very Thanks Too YOU ..
Click to expand...
Click to collapse
Heya did u succeeded in removing this error?
Sent from my A2 using xda app-developers app
Tweak for better battrey life and performance media,,
ONLY FOR COLINUX ROM
(yet not test on other ROM)
Installation
-Download coliTweak.zip
-Ekstrak on your sd card
-Open colitweak.txt and copas to your build.prop
-Boot into recovery
-Flash colitweak.zip
-wipe cache
-Reboot
-Enjoy
Do It Your Own Risk
Download : https://db.tt/BV5ytkpZ
Please hit thanks if you like my thread and if i help you
You also need a zipalign file in xbin like you have one for sqlite3.
https://db.tt/2tR7z1MP
Sent from my GT-I9300 using xda premium
FlemishDroid said:
You also need a zipalign file in xbin like you have one for sqlite3.
https://db.tt/2tR7z1MP
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
yeah...thanks bro for your suggest for me,,,