Hello guys!
This is a test CWM for the Xperia J Jelly Bean on stock firmware and stock kernel.
This is ONLY FOR UNLOCKED BOOTLOADER
This is only a TEST version....I am not sure if it works because i dont have an Xperia J
I have just ported the CWM not tested it....if this causes any harm to ur phone, i am not responsible.... Even in such cases, flash your phone using flashtool and everything should be alrite
Requirements:-
Xperia J
Unlocked Bootloader
Fastboot / Android SDK / knowledge of how to flash kernel
Steps:-
1) Download the kernel.elf from the Downloads.
2) Put the kernel.elf in fastboot folder
3) Put your phone in fastboot mode (Volume up + connect usb cable)
4) Flash d kernel using "fastboot flash boot kernel.elf"
5) After completion, Disconnect your phone and start it
6) To boot into CWM, repeatedly press the volume key once the phone is at sony logo
7) Enjoy!!
Downloads:-
CWM Xperia J
Again, i dont have xperia J so i have not tested it...anyone please test it and report..
If you have any quiries, please leave it below..
Thanks..
Can CWM not be ported for j locked bootloader?
It does not work. When the phone starts up, top LED lights up and the phone gets restarts
zmxn said:
It does not work. When the phone starts up, top LED lights up and the phone gets restarts
Click to expand...
Click to collapse
start pressing the volume up button when the led lights up...
This is custom kernel or stock?
ArdhiArt said:
This is custom kernel or stock?
Click to expand...
Click to collapse
stock kernel bro
Sent from my Xperia J using Tapatalk 2
AdityaPrasetyo_ said:
stock kernel bro
Sent from my Xperia J using Tapatalk 2
Click to expand...
Click to collapse
Okok... Nanti dicoba
100% works gan?
Sent from my ST26i using xda premium
micromaxa60 said:
start pressing the volume up button when the led lights up...
Click to expand...
Click to collapse
No reaction when I push volume + / -. Phone gets bootloop.
Wysłane z mojego ST26i za pomocą Tapatalk
Related
I have a Rooted Xperia Tipo running on Stock ICS I restarted it to enter fastboot mode by holding volume+ button and power button.
When I try to open it It won't open and flashes 3 Red Lights[/B]
Please help
Is your problem solve????
Pm me
Sent from my ST21i2 using xda premium
fonetalker101 said:
I have a Rooted Xperia Tipo running on Stock ICS I restarted it to enter fastboot mode by holding volume+ button and power button.
When I try to open it It won't open and flashes 3 Red Lights[/B]
Please help
Click to expand...
Click to collapse
By "entering fastboot" U mean that u wanted to access cwm?
NOTE: This is not my work, credit goes to slr3gx.
HERE IS ZIP FILE i.e CWM recovery for xperia miro
1. Just extract it double click on install.bat (Linux users click on install.sh)
2. Follow instructions
3. Restart your phone
4. While SONY logo appears repeatedly press volume down button
5. You will be in recovery mode
Enjoy
Which versoin of cwm it is?
It is 6.0.1.2
Sent from my ST23i using xda premium
have you made this cwm yourself?
where are the credits?
and by the way cwm thread is alredy on this forum. why have you made another?
Are u the creator of this buddy?or are you sharing slr3gx's work?
hit the thanks if I helped...it means a lot to me...
sry i forgot to mention credit
prashantsharma324 said:
NOTE: This is not my work, credit goes to slr3gx.
HERE IS ZIP FILE i.e CWM recovery for xperia miro
1.Just extract it double click on install.bat not on install.sh
2.follow instructions
3.Then switch off your miro
4. switch it ON
5.While SONY logo appears repeatedly press volume down button
6.You will be on recovery mode
enjoy
Click to expand...
Click to collapse
Sorry BRO. I can't install recovery for my xperia miro st23i why?
Thnxx Bro!!
fRzzzy said:
Sorry BRO. I can't install recovery for my xperia miro st23i why?
Click to expand...
Click to collapse
Dnt knw why the problem persist with you.....
just extract zip, click on install.bat and its done.....
to go into the recovery mode press volume down 4 to 5 times when SONY logo appears :good:
Noobkunj said:
Thnxx Bro!!
Click to expand...
Click to collapse
ur welcome bro :silly:
hi i am deodexing my xperia l C2105 suddenly after a reboot i have A boot loop or boot stuck and i tried connecting it to the SUS and flashtool everytime it asked me to connect my phone/unit to the pc while holding the volume down button the unit light green and red for a second but my pc keep asking me to connect it
pls hellp me
:crying:
Stock or Custom?
Zedrick Dhave said:
hi i am deodexing my xperia l C2105 suddenly after a reboot i have A boot loop or boot stuck and i tried connecting it to the SUS and flashtool everytime it asked me to connect my phone/unit to the pc while holding the volume down button the unit light green and red for a second but my pc keep asking me to connect it
pls hellp me
:crying:
Click to expand...
Click to collapse
Do you use the stock or a custom kernel,rom?
The simple Way Just flash firmware.ftf
Sent from my C2105 using xda app-developers app
Trust Us
ozhiman said:
The simple Way Just flash firmware.ftf
Sent from my C2105 using xda app-developers app
Click to expand...
Click to collapse
YEEEEEES, You only have to enter into flashmode and restore from stock .ftf (firmware) for your phone
I had the same problem so, trust me
Click to expand...
Click to collapse
srcharged said:
Do you use the stock or a custom kernel,rom?
Click to expand...
Click to collapse
stock kernel
I cant Enter Flashmode but i can do cmw and fastboot
Hello
How to access Recovery mode
Sony Xperia j phone in
ameer96 said:
Hello
How to access Recovery mode
Sony Xperia j phone in
Click to expand...
Click to collapse
First, you need kernel with CWM, like this one http://forum.xda-developers.com/xperia-j-e/orig-development/kernel-vengeance-t2134810 :fingers-crossed:
Then follow the guide to flash the kernel
Then turn off the phone > press power button and volume down button in the same time. Done! :victory:
Hi,
I just installed Thunderzap 4.13 KK on my custom rom Vanir AOSP. It installed successfully but now after rebooting the phone is not booting up. It vibrates once when I press the power button but then no Thunderzap logo or Default logo comes up nor does the phone start.
What can I do ?
SatansRealCat said:
Hi,
I just installed Thunderzap 4.13 KK on my custom rom Vanir AOSP. It installed successfully but now after rebooting the phone is not booting up. It vibrates once when I press the power button but then no Thunderzap logo or Default logo comes up nor does the phone start.
What can I do ?
Click to expand...
Click to collapse
bro that happens if your bootloader is locked.....
please flash stockrom with flashtool
output battery
input b
hold vol- (dont touch powerbutton)
connect to pc while holding....
(if you see blue led.... retry process with vol+ ....you need red+green led)
then flash stockrom with flashtool
Sent from my C2105 using XDA Free mobile app