Database Info

[Q] Stuck on "Performing factory data reset"

I removed the ICS build and use ODIN to return back to stock build.
Still having some problem so i did a data reset. It keep getting stuck there and i already done it three times.
Any suggestions?

So you flashed GB stock.tar through Odin? Do you mean factory/data reset in clockwork recovery? Flashing back to stock should take away your root so you would have to flash CWM again, make a nandroid backup, and flash superuser zip again.
What problems where you having before and after the ICS build?
Explain a bit further exactly what you did.

I installed STOCK Tar using ODIN.
It is booting up fine except i keep getting errors like "android.process.acore" has stopped unexpectedly. Most of the android apps is not working, like phone, contacts, calendars, etc.
I try to do a factory reset and it keep stopping halfway and hangs.

Your going to have to flash the kj2 modem. I had the same problem. I saw that the ucalc4 was still there, its on its own partition so it doesn't get changed when you flash stock tar. What I did...
1. Flash cwm in Odin
2. Boot into cwm (do backup)
3. Flash kj2 modem (I did it twice)
4. Reboot
5. Check baseband (should be uckj2)
This made the FC's go away. It seemed to me that the stock tar doesn't like that baseband, I can't explain why though. Didn't make sense to me but I fixed it. Also I found the ICS leak doesn't like stock recovery. Fyi
Sent from my SAMSUNG-SGH-I727 using xda premium

Little bit lost here.
I already flash it twice using ODIN and using the uckj2 build.

jxl92182 said:
Little bit lost here.
I already flash it twice using ODIN and using the uckj2 build.
Click to expand...
Click to collapse
Build is one thing, baseband is different. When you flash stock your build will be uckj2, you say your on it. OK good. Now check your baseband, will probably still be the ICS baseband ucalc4, that is your modem. You need to flash the uckj2 modem in cwm. http://forum.xda-developers.com/showthread.php?p=20157930
Once you flash that your baseband will be uckj2. That should fix your fc's. Did for me. If not, you may need to try something else which I will explain if need be that will clean things up.
Sent from my SAMSUNG-SGH-I727 using xda premium

Already installed the radio twice.
Original Shipped AT&T Skyrocket Radio I727ATTKJ2 and RIL
using CWM and still giving me errors....
Currently my phone is showing this:
Basband
I727UCKJ2
Kernel
2.6.35.11
Build number
GINGERBREAD.UCKJ2

jxl92182 said:
Already installed the radio twice.
Original Shipped AT&T Skyrocket Radio I727ATTKJ2 and RIL
using CWM and still giving me errors....
Currently my phone is showing this:
Basband
I727UCKJ2
Kernel
2.6.35.11
Build number
GINGERBREAD.UCKJ2
Click to expand...
Click to collapse
OK. What you need to do then is clean things up. There are two ways that I use but I prefer #1.
1. Flash darkside superwipe in cwm. Do a battery pull. Go into Odin and flash k0nanes tar.
OR
2. Flash stock recovery. Wipe data/factory reset. Do a battery pull. Go into Odin and flash k0nanes tar.
Then you can cwm, root, flash anything you want.
Sent from my SAMSUNG-SGH-I727 using xda premium

Thanks a lot hcyplr29 and Presbycusis.
I use darkside's flash and then reload stock.
Everything is fine now.

Glad to hear that. I swear by darkside between ROMS.
Sent from my SAMSUNG-SGH-I727 using xda premium

jxl92182 said:
Thanks a lot hcyplr29 and Presbycusis.
I use darkside's flash and then reload stock.
Everything is fine now.
Click to expand...
Click to collapse
Yah....Darkside.Wipe is killer. Glad to hear your back in action. It is confusing at first getting OS version, kernel, and modem all strait. It is a good learning experience.
Sent from my SAMSUNG-SGH-I727 using xda premium

basically those fc's were becuz the partition table needs to be reset after flashing ics to go back to gb. Darkside does this.

hcyplr29 said:
OK. What you need to do then is clean things up. There are two ways that I use but I prefer #1.
1. Flash darkside superwipe in cwm. Do a battery pull. Go into Odin and flash k0nanes tar.
OR
2. Flash stock recovery. Wipe data/factory reset. Do a battery pull. Go into Odin and flash k0nanes tar.
Then you can cwm, root, flash anything you want.
Sent from my SAMSUNG-SGH-I727 using xda premium
Click to expand...
Click to collapse
please help. i installed ics and cwm then went back to gingerbread.
what i did was
-i used SGH-I727-UCKJ2-k0nane.tar to go back to GB
-after installing it i get FC.
-i installed recovery-clockwork-touch-5.8.1.3-hercules.tar
-after installing it i rebooted to CWM by pressing volume up & down buttons and power button.
-now i couldnt seem to navigate cwm 5.8.1.3. the screen keeps on blinking. when i press down it only gets on option #2 which is install zip. and when i press the power button to ok it doesnt do anything.
i wanted to flash darkside so to wipe everthing. but my cwm is not working.
pls help. i really appreciate all your response
thanks

agenthack said:
please help. i installed ics and cwm then went back to gingerbread.
what i did was
-i used SGH-I727-UCKJ2-k0nane.tar to go back to GB
-after installing it i get FC.
-i installed recovery-clockwork-touch-5.8.1.3-hercules.tar
-after installing it i rebooted to CWM by pressing volume up & down buttons and power button.
-now i couldnt seem to navigate cwm 5.8.1.3. the screen keeps on blinking. when i press down it only gets on option #2 which is install zip. and when i press the power button to ok it doesnt do anything.
i wanted to flash darkside so to wipe everthing. but my cwm is not working.
pls help. i really appreciate all your response
thanks
Click to expand...
Click to collapse
That's because it's touch recovery, you don't push any buttons. Lmao. Touch the screen to use it. Haha
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2

hahahaha... woooooo.... that's a good one... well i installed a later version of the CWM.. i think it was 5.0.2.6 version.. is that ok to use? now i can use the up and down buttons... omg! now thats what i call D*mb @$$ hahahaha..my bad my bad

agenthack said:
hahahaha... woooooo.... that's a good one... well i installed a later version of the CWM.. i think it was 5.0.2.6 version.. is that ok to use? now i can use the up and down buttons... omg! now thats i call D*mb @$$ hahahaha..
Click to expand...
Click to collapse
I would just go back to 5.8. It's much better for me. Plus it works far better for ics builds. But yeah, you can use your buttons again for that old ass version you got now
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2

ok thanks. i already installed back the latest cwm. now its working! just have 1 question. im trying to look for flash option but theres no option thats says flash. i wanna flash DARKSIDE.SUPER.WIPE.zip its on my sd card already.i tried to click on install zip and chose DARKSIDE.SUPER.WIPE.zip but it says process cant be done..can you please teach me how? sorry for my ignorance.

agenthack said:
ok thanks. i already installed back the latest cwm. now its working! just have 1 question. im trying to llok for flash option but it theres no option thats says flash. i wanna flash Flash DARKSIDE.SUPER.WIPE. its on my sd card already.i tried to click on install zip and chose Flash DARKSIDE.SUPER.WIPE but it says process cant be done..can you please teach me how? sorry for my ignorance.
Click to expand...
Click to collapse
install zip from ad card, then choose zip from sd card. Scroll down and click on the zip
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2

got it! just did the darkside wipe...pulled the battery out after..then im flashing it now with odin SGH-I727-UCKJ2-k0nane...hope it works now with no FC and i hope i get my signal back...will update you inawhile..
thanks for your help..

agenthack said:
got it! just did the darkside wipe...pulled the battery out after..then im flashing it now with odin SGH-I727-UCKJ2-k0nane...hope it works now with no FC and i hope i get my signal back...will update you inawhile..
thanks for your help..
Click to expand...
Click to collapse
Don't use that tar. Use sammobile
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2

Trying to install CM10 with TWRP

I have an att htc one x that has 4.01 and 2.20 software. I was able to successfully root the phone and now I'm trying to install CM10 but it's failing when trying to install.
It says it missing a MD5 File and says theres an error in the SD card/download/ the cm 10 file.
What am I doing wrong? Thank you

Make sure the Rom is for our phone and check the md5 sum it might be a bad download

I've tried redownloading the file several times and I'm still getting the same error message.
I'm downloading CM10 from here http://get.cm/?device=endeavoru

kswannabe said:
I've tried redownloading the file several times and I'm still getting the same error message.
I'm downloading CM10 from here http://get.cm/?device=endeavoru
Click to expand...
Click to collapse
Wrong version, endeavoru is the international (Tegra3) One X. Our phone is code named evita.
Just stick to the Development forum here, to avoid flashing ROMs for the wrong version of the One X:
http://forum.xda-developers.com/forumdisplay.php?f=1726

Thanks for the information.
Was able to successfully flash to CM10 but I'm stuck at the CM10 boot screen. Circle going counter clock wise around. What should I do?

kswannabe said:
Thanks for the information.
Was able to successfully flash to CM10 but I'm stuck at the CM10 boot screen. Circle going counter clock wise around. What should I do?
Click to expand...
Click to collapse
If you flashed an international rom, there's a good possibility you messed something up. Factory reset, wipe /system, and try flashing the correct CM10 rom again.

Ok. I'm trying to do a factory reset from bootloader but whenever I do, it goes to the CM10 boot screen where I was earlier. How can I do a factory reset?

kswannabe said:
Ok. I'm trying to do a factory reset from bootloader but whenever I do, it goes to the CM10 boot screen where I was earlier. How can I do a factory reset?
Click to expand...
Click to collapse
A guy I was working with had the boot screen splash. If you've flashed the correct one, then wipe your caches. if that doesn't work reflash.

kswannabe said:
Ok. I'm trying to do a factory reset from bootloader but whenever I do, it goes to the CM10 boot screen where I was earlier. How can I do a factory reset?
Click to expand...
Click to collapse
Don't do it from bootloader, it can corrupt your sdcard. Do it from recovery.
Go into recovery, wipe cache, dalvik cache, factory reset and system. Then install the CORRECT rom.
Sent from my One X using xda premium

How can I reflash?
Thanks
-edit-
I was able to get back into TWRP. There I tried to do a factory reset but it tells me it failed. And after installing CM10, do I have to go back into bootloader and flash boot.img from the CM10 nightly zip file?
And there goes my stock rom... Factory reset is not working on TWRP and tried system reset thinking it would get rid of CM10 but instead erased my stock rom.
Please help, need a working phone soon..

kswannabe said:
How can I reflash?
Thanks
-edit-
I was able to get back into TWRP. There I tried to do a factory reset but it tells me it failed. And after installing CM10, do I have to go back into bootloader and flash boot.img from the CM10 nightly zip file?
Click to expand...
Click to collapse
There are stickies and tuts around here for this.. but, the reason why it's not working for you is you didn't flash the boot.img first. before you installed the .zip. Also, you'll need the latest gapps for that ROM as well.

Not familiar with the forums around here, so if you could link me some of these stickies or tutorial it would be great.

Have a look here
Sent from my One X using xda premium

timmaaa said:
Have a look here
Sent from my One X using xda premium
Click to expand...
Click to collapse
or here http://forum.xda-developers.com/showthread.php?t=1952076

I have this problem. i went to the thread you posted, loaded TWRP, I've factory reset and what not, but now I'm stuck in TWRP without any real viable options. When I try to reboot to system, it brings me back to TWRP menu.

mfc1288 said:
I have this problem. i went to the thread you posted, loaded TWRP, I've factory reset and what not, but now I'm stuck in TWRP without any real viable options. When I try to reboot to system, it brings me back to TWRP menu.
Click to expand...
Click to collapse
Do you have a rom flashed? If so, wipe both caches and reboot. If that doesn't work, reflash and do a system wipe from TWRP.
Sent from my HTC One XL cellular device over clocked to 1.9Ghz

Rooted SGH-T989D trying to flash CM10
kswannabe said:
How can I reflash?
Thanks
Click to expand...
Click to collapse
hi. i have fallowed all the steps to root my phone from this site. when i go down to how to flash a rom i have some issues.
i am trying to flash CM10. when i go to install on (step 8) i get an errer. my screen says
Updating partition details...
Running boot script...
Finished running boot script.
E:Unable to open zip file.
Error flashing zip /external_sd/cm-10.1-hercu
Updating partition derails...
then it shows the home butten. failed in red than wipe cach/dalvik and reboot system buttons
anyone have any idea what im doing wrong?

Exactly which phone do you have? It looks like it says Hercules in the cm file name you wrote, which I think is a Samsung.
Sent from my Evita

Odin Question!!

i used TWRP to restore a backup but it wiped system and then failed. not noticing this i rebooted and the phone shuts off when i boot it. i tried holding power + vol up + home to get into recovery and install another zip but it hangs on the "Samsung Galaxy SIII" splash screen. if i use odin and it relocks my bootloader, will it format my internal memory? i had issues with this before and i dont want to go through losing all my data again. if anyone has any alternatives they will be much appreciated

You could Odin flash a no wipe rooted rom and see how it takes then.

Did you try doing a full wipe (factory reset/format system) and then reflashing a ROM?
Sent from my SCH-I535 using xda app-developers app

SlimSnoopOS said:
You could Odin flash a no wipe rooted rom and see how it takes then.
Click to expand...
Click to collapse
wow man nice save, i didnt even know they had this! ill definitely keep this image on hand

VinBertinelli said:
wow man nice save, i didnt even know they had this! ill definitely keep this image on hand
Click to expand...
Click to collapse
One more thing, your bootloader will be locked when you flash this. Just unlock it using EZ Unlock 1.2 and you're good to go if you want to flash roms and such.

[Q] In the middle of the root/unlock process... Need some help

Hi everyone. After 5 months, I decided to come back and try to root my phone again.
First, I'm on JB 4.1.2 with my VZW GS3.
I get to this step in the process.... Step 4 - Rooting Your Device and Unlocking Your Bootloader and every option I choose, tells me that the signature failed and the installation is aborted. Can someone tell me what I did wrong, if it can be fixed, and how?
I was once rooted before, and went back to stock using ODIN in the past. Will that have an effect on it?
When I got to Step 3, I used these instructions: •Flash the VRALEC Bootchain using ODIN v3.07 - My phone shows VRBMB1 - should I have used that boot chain instead? Can I still flash it using ODIN, over what is already there?
I can get my phone to boot normally, but when it boots it just shows custom at the bottom. I haven't bricked it or anything, I'm just concerned I haven't messed up the root process all together.
Thanks for the help...

Did you choose to install the zip in recovery or did you pick a different option? First make sure your zip is good and you didn't get a bad download. You can flash the VRALEC Bootchain whenever, and you must do it before flashing your recovery. If installing your zip isn't working in CWM try installing TWRP and flash the zip on that recovery instead. And no restoring back to stock with Odin won't affect anything.
Sent from my Verizon Samsung Galaxy SIII

joshua5683 said:
Did you choose to install the zip in recovery or did you pick a different option? You can flash the VRALEC Bootchain whenever, and you must do it before flashing your recovery. If installing your zip isn't working in CWM try installing TWRP and flash the zip on that recovery instead. And no restoring back to stock with Odin won't affect anything.
Sent from my Verizon Samsung Galaxy SIII
Click to expand...
Click to collapse
I chose to install the zip in recovery, and I did it after flashing my recovery.
Can I install TWRP using ODIN, right over the CWM installation? Will it hurt anything?
Thanks for your help!!

lou1210 said:
I chose to install the zip in recovery, and I did it after flashing my recovery.
Can I install TWRP using ODIN, right over the CWM installation? Will it hurt anything?
Thanks for your help!!
Click to expand...
Click to collapse
Here's what I did:
1. Booted into ODIN, Flashed VARELC
2. Booted into ODIN again, Flashed Recovery (following ALL directions exactly) Pulled battery, put back in, went back into ODIN
3. Attempted to install the Update -> Download SuperSU + Unlocked Bootloader (showed FIXED in the file name)
4. Got this process: finding update package, opening update package, verifying package, signature verification failed, Installation Aborted.

lou1210 said:
Here's what I did:
1. Booted into ODIN, Flashed VARELC
2. Booted into ODIN again, Flashed Recovery (following ALL directions exactly) Pulled battery, put back in, went back into ODIN
3. Attempted to install the Update -> Download SuperSU + Unlocked Bootloader (showed FIXED in the file name)
4. Got this process: finding update package, opening update package, verifying package, signature verification failed, Installation Aborted.
Click to expand...
Click to collapse
Yeah you're doing everything right I don't know why it's saying that. Try installing with TWRP - you can flash it at anytime and overwrite the old recovery.
Sent from my Verizon Samsung Galaxy SIII

lou1210 said:
Here's what I did:
1. Booted into ODIN, Flashed VARELC
2. Booted into ODIN again, Flashed Recovery (following ALL directions exactly) Pulled battery, put back in, went back into ODIN
3. Attempted to install the Update -> Download SuperSU + Unlocked Bootloader (showed FIXED in the file name)
4. Got this process: finding update package, opening update package, verifying package, signature verification failed, Installation Aborted.
Click to expand...
Click to collapse
Your second and third step are wrong. You need to flash SuperSU in recovery NOT download mode. Download mode handles "tar" files, recovery handles "zips."
Edit: well, the latter half of your second step is wrong, pull battery then boot into recovery mode...home, volume UP, and power
Sent from my SCH-I535 using xda app-developers app

SlimSnoopOS said:
Your second and third step are wrong. You need to flash SuperSU in recovery NOT download mode. Download mode handles "tar" files, recovery handles "zips."
Edit: well, the latter half of your second step is wrong, pull battery then boot into recovery mode...home, volume UP, and power
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
I'm sorry, I am doing the supers in recovery, not ODIN. I tried both CWM now and TWRP and still have the same exact error messages. Not sure what to do to fix this, but I'm almost ready to try to reverse what I did. I have been wanting to remove the bloatware and now I saw the Carbon ROM that looks pretty cool. If you can get me past this issue, it would be great.

Oh I just noticed you chose update. You have to choose to install in CWM not update. But if it didn't work in TWRP either it sounds like there is something wrong with the zip file. Have you tried redownloading the zip file?
Sent from my Verizon Samsung Galaxy SIII

lou1210 said:
I'm sorry, I am doing the supers in recovery, not ODIN. I tried both CWM now and TWRP and still have the same exact error messages. Not sure what to do to fix this, but I'm almost ready to try to reverse what I did. I have been wanting to remove the bloatware and now I saw the Carbon ROM that looks pretty cool. If you can get me past this issue, it would be great.
Click to expand...
Click to collapse
Here is another interesting thing....
Should I have an install or is Apply Update the same thing. When I boot into recovery, here are my choices:
reboot
apply update from adb
apply update from external storage
wipe data/factory reset
wipe cache
apply update from cache
Do I have the right version of recovery? Does this help any?

Ok. So I decided to download a new recovery file for CWM and this time it worked.
I'm not sure what told me to do it, but I decided to give it a go.
Next question, I remember the root processing being very involved with clearing cache, clearing dalvik cache, etc.
Is there a link to the newest process on how to root exactly and apply new ROMs? I of course will be backing up my existing ROM first.

lou1210 said:
Ok. So I decided to download a new recovery file for CWM and this time it worked.
I'm not sure what told me to do it, but I decided to give it a go.
Next question, I remember the root processing being very involved with clearing cache, clearing dalvik cache, etc.
Is there a link to the newest process on how to root exactly and apply new ROMs? I of course will be backing up my existing ROM first.
Click to expand...
Click to collapse
That's odd someone else had that issue where install wasn't an option. He ended up using TWRP. That clearing thing is for flashing roms. The way you flash every rom is wipe data/factory reset, clear cache, clear dalvik cache, and wipe /system. Make a backup before. I recommend using TWRP cause there have been times in CWM where I would try to restore and I would get an MD5 mismatch error, which I've never gotten on TWRP
Sent from my Verizon Samsung Galaxy SIII

I was thinking of using the carbon ROM. I realized that I didn't install the md5 file extension for cwm using ODIN so I went back and flashed it with one i was able to find, and it worked. I'm ok with using twrp but I haven't been able to find an md5 file for ODIN. Can you give me a link to one? I've only found .tar files and that seems to have been my problem. I might still try to use cwm now that I have my existing stock ROM backed up. Still debating.
On a side note, if I decide to unroot again, since I have not flashed, is there a method for that so I don't lose what I've got?
Sent from my SCH-I535 using Tapatalk 2

lou1210 said:
I was thinking of using the carbon ROM. I realized that I didn't install the md5 file extension for cwm using ODIN so I went back and flashed it with one i was able to find, and it worked. I'm ok with using twrp but I haven't been able to find an md5 file for ODIN. Can you give me a link to one? I've only found .tar files and that seems to have been my problem. I might still try to use cwm now that I have my existing stock ROM backed up. Still debating.
On a side note, if I decide to unroot again, since I have not flashed, is there a method for that so I don't lose what I've got?
Sent from my SCH-I535 using Tapatalk 2
Click to expand...
Click to collapse
What do you mean you can't find the md5? You can flash the .tar twrp recovery in Odin the same way you flash md5s. And no sorry I don't know of any way to unroot without flashing a factory image. But to get your apps back you can use App Backup and Restore. It won't recover the app data obviously cause you need root for that but it's faster for restoring your apps so you don't have to make a list and download each one off the Play Store.

The file I had used didn't have an md5 filename and I think that's why it failed. I found one and downloaded it so it worked for me after that. Thank you for the unroot info too.
Sent from my SCH-I535 using Tapatalk 2

lou1210 said:
The file I had used didn't have an md5 filename and I think that's why it failed. I found one and downloaded it so it worked for me after that. Thank you for the unroot info too.
Sent from my SCH-I535 using Tapatalk 2
Click to expand...
Click to collapse
No problem glad you got things working
Sent from my SCH-I535 using xda app-developers app

[Q] Can't reinstall apps after flashing CyanogenMod

I just rooted my Verizon Galaxy SIII (MF1) via Casual and flashed CM 10.1.2. Only problem is I can't reinstall any of my apps. I've tried pushing apps from my PC to my phone. Downloading while online from the phone itself. I used titanium backup and backed up everything before the flash, but I can't figure out how to access the data I backed up. Sorry, I'm a noob, but I searched for hours and couldn't find a solution to this specific problem.
(Also, my camera hasn't worked since the flash)

Did you flash the gapps package after flashing the rom?
Sent from the future via Tapatalk 4

edfunkycold said:
Did you flash the gapps package after flashing the rom?
Sent from the future via Tapatalk 4
Click to expand...
Click to collapse
Yes, and now I just get a message that says "Unfortunately, Setup Wizard has stopped." As soon as I press OK it pops up again instantly ad infinitum. And now my phone won't boot into recovery!

Go into recovery wipe cache and dalvik reflash the rom and gapps.
Edit: sorry missed the can't get into recovery. Do you have goo manager or rom Manager depending on which recovery you use and reflash recovery via app. If not as next user pointed out Odin is your friend.
Sent from the future via Tapatalk 4

edfunkycold said:
Go into recovery wipe cache and dalvik reflash the rom and gapps.
Sent from the future via Tapatalk 4
Click to expand...
Click to collapse
They just said that they can't get into recovery am I right? try using Odin or something similar to flash the latest version of cwm recovery then try wat edfunkycold suggested :thumbup: goodluck
Sent from my One X using xda app-developers app

edfunkycold said:
Go into recovery wipe cache and dalvik reflash the rom and gapps.
Sent from the future via Tapatalk 4
Click to expand...
Click to collapse
That's what I'm trying to do...unfortunately my phone will not boot into recovery. Holding down proper buttons does not work. And since I'm stuck on this error message I can't get to terminal app to reboot. And when I hold power button the "boot in recovery" option is not there.

windom--earle said:
That's what I'm trying to do...unfortunately my phone will not boot into recovery. Holding down proper buttons does not work. And since I'm stuck on this error message I can't get to terminal app to reboot. And when I hold power button the "boot in recovery" option is not there.
Click to expand...
Click to collapse
Turn the phone off. Then press HOME>POWER>VOLUME UP at the same time this will boot you into recovery.
Sent from the future via Tapatalk 4

lolz maybe they were using the wrong button combo all along
Sent from my One X using xda app-developers app

edfunkycold said:
Turn the phone off. Then press HOME>POWER>VOLUME UP at the same time this will boot you into recovery.
Sent from the future via Tapatalk 4
Click to expand...
Click to collapse
Ok, I got it to boot in recovery mode. I wiped dalvik and cache and then reflashed ROM and gapps. Still getting exact same error message.

windom--earle said:
Ok, I got it to boot in recovery mode. I wiped dalvik and cache and then reflashed ROM and gapps. Still getting exact same error message.
Click to expand...
Click to collapse
Then the only suggestion i have is to flash stock rooted rom or any TW rom and see if the phone works properly. Then we can proceed fresh again. If you run into issues on TW rom then a full odin to stock might be required.
Sent from the future via Tapatalk 4

all eaeuni
edfunkycold said:
Then the only suggestion i have is to flash stock rooted rom or any TW rom and see if the phone works properly. Then we can proceed fresh again. If you run into issues on TW rom then a full odin to stock might be required.
Sent from the future via Tapatalk 4
Click to expand...
Click to collapse
Ok I just flashed my stock rooted rom and everything seems to be working just fine. I think I'm going to hold off on flashing a custom rom again. Want to do some more research first. Thanks for everyone's help!